- ntg-context - NTG Mailing Lists

space between last bodytext line and blackrule
by Steffen Wolfrum 14 Nov '07

14 Nov '07

Hi, in a layout with footnotes at the bottom of the page it happens sometime that the last bodytext line is moved to a new page although it *looks* as there would be enough space between the last bodytext line and the footnote's "blackrule". When printing the page and using the ruler you may find out that only 0.5mm is missing ... I know that there is a way to control the space between the blackrule and the first footnote's line: \def\MyRule {\blackrule[width=3cm,height=1mm] \vskip.5cm}% here this space is 0.5cm But how do I control the space between the *last bodytext line* and the blackrule?? Steffen

2 1

rotate bug?
by Peter Rolf 14 Nov '07

14 Nov '07

Hi, This morning I used \rotate to correct some slightly sloped graphics and noticed a weird behavior. In case of the rotation angle interval (-1,0) the negative sign is simply ignored, so the rotation goes to the opposite direction. Donno if negative values for the rotation angle are allowed (they normally work). But it's easier to handle it this way (sign for direction of rotation). @Wolfgang: as workaround, only use positive values or add -360 ;) (and sorry for my wrong interpretation of your table mail) @Taco: are you still collecting the ConTeXt bugs? Best wishes, Peter \setuplayout[grid=yes] \starttext \showgrid \def\Foobar{\blackrule[width=\textwidth,height=0.5\lineheight]} \framed{\rotate[rotation=-0.5]{\Foobar}} % -0.x is not working (sign is ignored) \snaptogrid\hbox\bgroup \framed{\rotate[rotation=359.5]{\Foobar}} % ok \egroup \snaptogrid\hbox\bgroup \framed{\rotate[rotation=0.5]{\Foobar}} % ok \egroup \snaptogrid\hbox\bgroup \framed{\rotate[rotation=-359.5]{\Foobar}} % ok \egroup \stoptext

3 4

Re: [NTG-context] TOC: alternatives (Was: continous chapter numbering)
by Jeff Smith 14 Nov '07

14 Nov '07

On Nov 13, 2007 4:51 AM, Wolfgang Schuster <schuster.wolfgang(a)googlemail.com> wrote: > % continue chapter numberind over parts > \setuphead[part][resetnumber=no] Thanks, that was simple in the end... Now, a real TOC question/problem. Reading through old posts and docs, I remain unconvinced as to what is the best solution between creating my own lists or customizing the standard Alternatives. But even then, is the latter possible? I only need to modify two slight details with alternative c (or b, not sure yet if I use the dots or not). When creating my own lists, I try to emulate alternative c but I still am not satisfied with what I come up with. First off, I don't want the chapter/section numbers to align on the left, I want them to indent with the text. Second, I don't want the chapter number in my section numberings. So, instead of the following (here I don't bother with the page numbers) : I Chapter One I-1 First Section I-1.1 First Subsection I-1.2 Second Subsection I-2 Section Section II Chapter Two II-1 First section II-1.1 First subsection II-2.1 Section subsection I'd like to have: I. Chapter One 1. First Section 1.1. First Subsection 1.2. Second Subsection 2. Section Section II. Chapter Two 1. First section 1.1. First subsection 2.1. Section subsection If I make my own lists, I don't know how to align the page number to the right, like alternative=b/c does, and I can't find how to have a linebreak with single linespacing after an entry (my document doesn't use single linespacing and so it interefered with my TOC explorations). Alternative=b/c does everything I need, minus the two details mentionned above. So, it would seem easier if I could just modify it. Is it possible? Thanks again! Jeff

3 2

\setupnotes (Undefined control sequence ??)
by Steffen Wolfrum 14 Nov '07

14 Nov '07

Hi, is the 'split' parameter not supported anymore? ! Undefined control sequence. l.6 \setupnotes [footnote][split=strict] ? Steffen ConTeXt ver: 2007.08.07 12:43 MKII fmt: 2007.11.14 int: english/ english

1 1

modifying bib style files
by Andrea Valle 14 Nov '07

14 Nov '07

Hi to all, I'm tweaking with bib module. I saw that there are different possible style E.g. apa here: \setuppublications[alternative=apa,criterium=all] I'm not satisfied because I need Italian names (e.g. pag. instead of pages and so on) and plus the scientific bib style are typically different from the ones used in humanities. What have I to do to create a style file? My idea was to take one of the files indicated by Tacos' manual and modify it. If so, and then? Many thanks -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong) -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong)

3 4

typesetting a bibtex file
by Andrea Valle 13 Nov '07

13 Nov '07

I have a biblio in bibtex format. I'd like to have it typeset by ConTeXt as a complete document, not as a consequence of refs in text (i.e. a need to have a biblio file) How can it be done? Many thanks -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong)

3 4

TOC: Continous chapter numbering
by Jeff Smith 13 Nov '07

13 Nov '07

Hi again all, I'm plunging deep into ConTeXt nowadays so I have a few more questions in store, and here's one below. But I have to repeat, ConTeXt is an amazing thing for which I'm truly grateful. I'm currently using it to typeset a complex etymological dictionary at my job, and my doctoral dissertation as well, and I have absolutely *no* idea what I would do without it (what, MS Word? perish the thought!)! So, right now I'm exploring the table of content possibilities. I was wondering if it was possible to use a continuous chapter numbering throughout a whole document, across several parts. So, for example, I'd have chapters 1, 2, 3, 4 in part 1, and chapters 5, 6, 7, 8 in part 2, and so on. Thanks again! Jeff

3 2

Re: [NTG-context] OpenType features in XeTeX (Was: Some update woes on Linux)
by Jeff Smith 13 Nov '07

13 Nov '07

On Nov 10, 2007 9:23 PM, Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> wrote: > You can say (features=default is optional) > \definefontsynonym[SomeFont][name:Font Name][features=default] > which means that XeTeX will call the font > \font\somefont="FontName;mapping=tex-text,..." (tex-text is > implied by features=default) > Is [features=default] the place where we can access OpenType features? Let's say I have an OpenType font with several number styles (regular, proportional, etc.). Is it possible to use them? I've always wanted to ask this and be sure. Now seems the good time. :-) Thanks, Jeff

3 4

Some update woes on Linux
by Jeff Smith 13 Nov '07

13 Nov '07

Hi all, After searching the archives and reading the wikis, I'm still at loss on this one. :( I installed TexLive 2007 on Ubuntu Gutsy through the repository package. All went well. However, given that I have to use XeTeX and that the ConTeXt that was installed with the package dates from May 2007, which is between January and 08.29, to be sure everything was okay I updated ConTeXt. I did it manually because ctxtools didn't work. A problem with the paths. First red flag, but I went on manually. I got the newest cont-tmf.zip and unzipped it in /usr/share/texmf and regenerated the formats by doing: texexec --make --all To check I had the correct version, I ran, on the commandline, these two: texexec --check and: ctxtools --contextversion Both gave me 2007.09.28 16:52, which seems quite correct. However, when I try to compile a document (with the --xtx option), I get the following error: ConTeXt ver: 2007.04.17 12:51 MKII fmt: 2007.11.5 int: english/english language : language en is active system : cont-new loaded (/usr/share/texmf/tex/context/base/cont-new.tex FatalError : Your format does not match the base files! FormatVersion : 2007.04.17 12:51 MKII FilesVersion : 2007.09.28 16:52 Clearly, there is something I must do that I don't know about or that I haven't found anywhere. Anyone can help? I figure it's simple -- and with all those numerous update questions around, I'm still stumped. Many thanks in advance for any help. Cheers! Jeff Smith

7 18

Presentation interaction list
by Jeremy Hughes 13 Nov '07

13 Nov '07

Hi, Forgive me if this is a double post, it didn't seem to get through the first time. I'm writing a presentation where each slide has an interaction list of chapters on the side. There are two things I can't figure out: 1. How to stop the list appearing outside of a part. (Is there a non-documented argument to `criterium'?) 2. How to have the current chapter highlighted on all slides within that chapter. (It's highlighted fine on the first slide of a chapter, but not on subsequent slides). Are these possible? Thanks for your help, Jeremy -------------- slide.tex ---------------- \setuppapersize[S6][S6] \setuppagenumbering[state=stop] \setuptolerance[verytolerant,stretch] \setupencoding[default=texnansi] \setupbodyfont[modern] \setuphead[section][ page=yes] \setuphead[subsection][ page=yes] \setupcolors[state=start] \definecolor [FadedColor] [r=.9,g=.1,b=.1] \definecolor [CurrentColor] [r=.1,g=.9,b=.1] \setupinteraction[ page=yes, color=FadedColor, contrastcolor=CurrentColor, menu=on, state=start] \setuplayout[rightedge=2cm,width=9cm] \startinteractionmenu[right] %% \placecontent[ %% level=chapter,criterium=all, %% coupling=on, %% alternative=f, align=left, %% interaction=all, %% before=, after=] \placelist[chapter][ criterium=all, alternative=f, align=left, interaction=all, before=, after=, chapternumber=no] \stopinteractionmenu \setuphead[part][ placehead=yes, page=yes] \starttext {\bfd Title page} \part {About \TEX} \chapter {Examples} \section {Knuth} \input knuth \section {More Knuth} \input knuth \chapter {More examples} \section {Donald} \input knuth \stoptext

1 0

Mark IV and pre-processing input file processing.
by Johannes Graumann 12 Nov '07

12 Nov '07

Hello, I started playing around with ConTeXt/LuaTeX and have a question here wich is related to a pet project of mine: is it possible to tell Mark IV something like this > texmfstart texexec --lua --environments=myfile.tex someotherfile.zip where 'myfile.tex' should contain a lua routine which would unzip 'someotherfile.zip' to /tmp and call LuaConTeXt on a file actually contained in the archive (among others)? While I'm sure this can be done in Lua, I wonder whether somebody can point me at how to access the names of files to be processed ('someotherfile.zip') from the running process ... Not sure whether I can make myself understood here ... please ask if I'm not making sense, Joh

3 8

Getting the default pdf fonts working on texlive 2007
by Berend de Boer 12 Nov '07

12 Nov '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys, Just had sometime to update to texlive 2007 from the DVD that was on the shelf for quite some time. But as usual, the default postscript fonts don't work. Setup: default texlive 2007. No cont-sys.tex. I used updmap --edit to change LW35 to ADOBEkb. Here my test file: ================================================== \setupbodyfont [postscript,11pt] \starttext A test. {\ss Another test}. \stoptext ================================================== The log file is: ================================================== This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) (format=cont-en 2007.10.25) 27 OCT 2007 09:44 entering extended mode %&-line parsing enabled. (/usr/local/texlive/2007/texmf/web2c/natural.tcx) **test.tex emergencyend (./test.tex ConTeXt ver: 2007.01.12 15:56 MKII fmt: 2007.10.25 int: english/english language : language en is active system : cont-new loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex \boislevel=\count210 (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-new.mkii)) system : cont-old loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys.rme loaded (/usr/local/texlive/2007/texmf-dist/tex/context/user/cont-sys.rme (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de->texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr->ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it->texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec- >13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16->2:3 sk->ec:ec - ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded \openout3 = `test.tui'. system : test.top loaded (./test.top specials : loading definition file tpd (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-fdf.tex \everygoto=\toks326 \PDFsymbolbox=\box157 \everyPDFxform=\toks327 (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-fdf.mkii)) specials : fdf loaded \everyPDFximage=\toks328 \PDFcurrenttransparency=\count211 ) specials : fdf,tpd loaded ) \openout0 = `test-mpgraph.mp'. \openout0 = `mpgraph.mp'. systems : system commands are disabled \@sl@\starttypescript=\count212 (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-pre.tex) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (/usr/local/texlive/2007/texmf-dist/tex/context/base/sort-def.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/sort-lan.tex) (./test.tuo) (./test.tuo) (/usr/local/texlive/2007/texmf-dist/tex/context/base/pdfr-def.tex) systems : begin file test at line 4 fonts : resetting map file list {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-empty.map } fonts : using map file: texnansi-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/texnansi-public-lm .map} fonts : using map file: original-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-base.map} fonts : using map file: ec-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/ec-public-lm.map} fonts : using map file: ec-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/ec-base.map} fonts : using map file: lm-ec {/usr/local/texlive/2007/texmf-dist/fonts/map/dvips/lm/lm-ec.map} fonts : using map file: 8r-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/8r-base.map} fonts : using map file: t5-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/t5-base.map} fonts : using map file: original-ams-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-ams-base. map} fonts : using map file: original-ams-euler {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-ams-euler .map} fonts : using map file: original-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-public-lm .map} [1.1] systems : end file test at line 10 system : cont-err loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-err.tex systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead ) ) Here is how much of TeX's memory you used: 1209 strings out of 57405 20097 string characters out of 535697 4598470 words of memory out of 5526617 40944 multiletter control sequences out of 10000+50000 152523 words of font info for 75 fonts, out of 1200000 for 2000 192 hyphenation exceptions out of 8191 47i,18n,51p,247b,471s stack positions out of 5000i,500n,6000p,200000b,5000s {/usr/local/texlive/2007/texmf-dist/fonts/enc/dvips/lm/lm-ec.enc}</usr/local /texlive/2007/texmf-dist/fonts/type1/public/lm/lmr10.pfb></usr/local/texlive/20 07/texmf-dist/fonts/type1/public/lm/lmss10.pfb> Output written on test.pdf (1 page, 39427 bytes). PDF statistics: 19 PDF objects out of 1000 (max. 8388607) 12 compressed objects within 1 object stream 0 named destinations out of 1000 (max. 131072) 1 words of extra memory for PDF output out of 10000 (max. 10000000) ================================================== Very weirdly it uses some lm fonts. It actually makes no difference if I use ADOBEkw or URWkb in updmap.cfg. So I'm concluding that context doesn't use updmap.cfg anymore, is that right? Next attempt is: ================================================== \usetypescript[adobekb][8r] \usetypescript[postscript][8r] \setupbodyfont [postscript,11pt] \starttext A test. {\ss Another test}. \stoptext ================================================== Now the log file shows that I have the ugly urw fonts: ================================================== This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) (format=cont-en 2007.10.25) 27 OCT 2007 09:46 entering extended mode %&-line parsing enabled. (/usr/local/texlive/2007/texmf/web2c/natural.tcx) **test.tex emergencyend (./test.tex ConTeXt ver: 2007.01.12 15:56 MKII fmt: 2007.10.25 int: english/english language : language en is active system : cont-new loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex \boislevel=\count210 (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-new.mkii)) system : cont-old loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys.rme loaded (/usr/local/texlive/2007/texmf-dist/tex/context/user/cont-sys.rme (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de->texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr->ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it->texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec- >13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16->2:3 sk->ec:ec - ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded \openout3 = `test.tui'. system : test.top loaded (./test.top specials : loading definition file tpd (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-fdf.tex \everygoto=\toks326 \PDFsymbolbox=\box157 \everyPDFxform=\toks327 (/usr/local/texlive/2007/texmf-dist/tex/context/base/spec-fdf.mkii)) specials : fdf loaded \everyPDFximage=\toks328 \PDFcurrenttransparency=\count211 ) specials : fdf,tpd loaded ) \openout0 = `test-mpgraph.mp'. \openout0 = `mpgraph.mp'. systems : system commands are disabled (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-exa.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-syn.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-enc.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-siz.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-map.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-spe.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/type-akb.tex)) (./test.tuo ) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (/usr/local/texlive/2007/texmf-dist/tex/context/base/sort-def.tex) (/usr/local/texlive/2007/texmf-dist/tex/context/base/sort-lan.tex) (./test.tuo) (./test.tuo) (/usr/local/texlive/2007/texmf-dist/tex/context/base/pdfr-def.tex) systems : begin file test at line 7 fonts : resetting map file list {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-empty.map } fonts : using map file: texnansi-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/texnansi-public-lm .map} fonts : using map file: original-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-base.map} fonts : using map file: ec-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/ec-public-lm.map} fonts : using map file: ec-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/ec-base.map} fonts : using map file: lm-ec {/usr/local/texlive/2007/texmf-dist/fonts/map/dvips/lm/lm-ec.map} fonts : using map file: 8r-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/8r-base.map} fonts : using map file: t5-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/t5-base.map} fonts : using map file: original-ams-base {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-ams-base. map} fonts : using map file: original-ams-euler {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-ams-euler .map} fonts : using map file: original-public-lm {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-public-lm .map} fonts : using map file: 8r-urw-times pdfTeX warning: pdftex (file 8r-urw-times.map): cannot open font map file fonts : using map file: original-youngryu-tx {/usr/local/texlive/2007/texmf-dist/fonts/map/pdftex/context/original-youngryu- tx.map} fonts : using map file: 8r-urw-helvetica pdfTeX warning: pdftex (file 8r-urw-helvetica.map): cannot open font map file fonts : using map file: 8r-urw-courier pdfTeX warning: pdftex (file 8r-urw-courier.map): cannot open font map file fonts : using map file: ec-urw-times pdfTeX warning: pdftex (file ec-urw-times.map): cannot open font map file [1.1] systems : end file test at line 13 system : cont-err loaded (/usr/local/texlive/2007/texmf-dist/tex/context/base/cont-err.tex systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead ) ) Here is how much of TeX's memory you used: 2410 strings out of 57405 50161 string characters out of 535697 4612009 words of memory out of 5540156 42017 multiletter control sequences out of 10000+50000 114738 words of font info for 100 fonts, out of 1200000 for 2000 192 hyphenation exceptions out of 8191 47i,18n,61p,288b,545s stack positions out of 5000i,500n,6000p,200000b,5000s {/usr/local/texlive/2007/texmf-dist/fonts/enc/dvips/base/8r.enc}</usr/local/ texlive/2007/texmf-dist/fonts/type1/urw/helvetic/uhvr8a.pfb></usr/local/texlive /2007/texmf-dist/fonts/type1/urw/times/utmr8a.pfb> Output written on test.pdf (1 page, 13230 bytes). PDF statistics: 19 PDF objects out of 1000 (max. 8388607) 12 compressed objects within 1 object stream 0 named destinations out of 1000 (max. 131072) 1 words of extra memory for PDF output out of 10000 (max. 10000000) ================================================== The warnings are a bit weird. I indeed don't have 8r-urw-times.map. I hope someone can give me the incantations again... - -- All the best, Berend de Boer PS: This email has been digitally signed if you wonder what the strange characters are that your email client displays. PGP public key: http://www.pobox.com/~berend/berend-public-key.txt -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.3 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/> iD8DBQFHIlRiIyuuaiRyjTYRArMfAJsFbyFr5jSoQmh8dROr9Em9wYE/fgCfSBO/ Sj/BRQuiPnZxnExodnJVSjg= =D42S -----END PGP SIGNATURE-----

5 6

Re: [NTG-context] Editor's Symbols?
by Alex K 11 Nov '07

11 Nov '07

Here's an example: http://www.colorado.edu/Publications/styleguide/symbols.html I've seen these printed (not handwritten) in grammar guides, so I was wondering if formatting them with TeX was possible at all. Thanks, Alex ----- Original Message ---- From: Idris Samawi Hamid <ishamid(a)colostate.edu> To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> Sent: Sunday, November 11, 2007 11:59:29 AM Subject: Re: [NTG-context] Editor's Symbols? Hi, On Sun, 11 Nov 2007 09:18:19 -0700, Alex K <pickle.frog(a)yahoo.com> wrote: > I'm pretty much a new user to ConTeXt and actually any form of TeX, so > forgive me if my question sounds ignorant. Is there any way to format > editor's symbols (like those used for demonstration in grammatical > textbooks) in a block of text using ConTeXt or LaTeX (preferably with > the former)? If not, then does anyone know how I might do this some > other way besides actually writing it out by hand? Forgive me, but could you be more specific? Do you have any links to examples of these symbols, etc.? Are they encoded in Unicode? Best Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shi`i Studies Department of Philosophy Colorado State University Fort Collins, CO 80523 -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Editor's Symbols?
by Alex K 11 Nov '07

11 Nov '07

Hi all, I'm pretty much a new user to ConTeXt and actually any form of TeX, so forgive me if my question sounds ignorant. Is there any way to format editor's symbols (like those used for demonstration in grammatical textbooks) in a block of text using ConTeXt or LaTeX (preferably with the former)? If not, then does anyone know how I might do this some other way besides actually writing it out by hand? Thanks for your help! Alex __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

Using SciTE for both, ConTeXt and LaTeX, at the same time?
by Peter Wüsten 11 Nov '07

11 Nov '07

Dear all, please excuse me if my question is grossly off-topic. I am relatively new to ConTeXt, coming from LaTeX. I fell in love with SciTE the moment I first tried it, and I'm using it with Hans' set of .properties files that came with ConTeXt. I would love to have different sets of tool-menues for both, say "go" opens a .pdf for ConTeXt, but a .dvi for LaTeX. I think the best approach would be to get at the %interface-variable that determines the highlighting. Now, the default setting is lexer.tex.interface.default=0 (at which I can get), but I cannot seem to get at lexer.tex.interface to see what flavour of TeX Scite has recognized. What would be the variable to check? Peter Wuesten

1 0

HTML to ConTeXt
by Aditya Mahajan 10 Nov '07

10 Nov '07

This is interesting. A website that converts html to context (actually uses markdown behind the scenes). http://johnmacfarlane.net/pandoc/html2x.html This is how the context wiki looks like. http://johnmacfarlane.net/cgi-bin/html2x.pl?url=http%3A%2F%2Fwiki.contextga… The program is written in haskell and is also available for download. You can use it to convert markdown to context. I had been looking for this for a while, when multiple formats are needed. Write in markdown and generate html or context. I do not completely like the context output it generates (for example http://johnmacfarlane.net/pandoc/README gets converted to http://johnmacfarlane.net/pandoc/example11.tex.html) Aditya

5 14

Re: [NTG-context] Doc to ConTeXt [was Re: HTML to ConTeXt]
by Andrea Valle 10 Nov '07

10 Nov '07

On 10 Nov 2007, at 12:31, Mojca Miklavec wrote: > Only as a note: all the opening quotation marks are wrong! Ok, Thanks Mojca, my fault. it was a problem of encoding, now I set pdftohml to utf8 and everything's fine Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong)

1 0

[OT]UK TeX FAQ, v3.17, released
by luigi scarso 10 Nov '07

10 Nov '07

From http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes """ What is ConTeXt? ConTeXt is a macro package developed by Hans Hagen of Pragma-Ade. ConTeXt is a document-production system based, like LaTeX, on the TeX typesetting system. Whereas LaTeX insulates the writer from typographical details, ConTeXt takes a complementary approach by providing structured interfaces for handling typography, including extensive support for colors, backgrounds, hyperlinks, presentations, figure-text integration, and conditional compilation. It gives the user extensive control over formatting while making it easy to create new layouts and styles without learning the TeX macro language. ConTeXt's unified design avoids the package clashes that can happen with LaTeX. ConTeXt also integrates MetaFun, a superset of MetaPost and a powerful system for vector graphics. MetaFun can be used as a stand-alone system to produce figures, but its strength lies in enhancing ConTeXt documents with accurate graphic elements. ConTeXt allows the users to specify formatting commands in English, Dutch, German, French, or Italian, and to use different typesetting engines (PDFTeX, XeTeX, Aleph, and soon LuaTeX) without changing the user interface. ConTeXt is developed rapidly, often in response to requests from the user community. *ConTeXt doesn't yet have quite such a large developer community as does LaTeX, but those developers who are active seem to have prodigious energy.*Support is available via a WIKI site and via the mailing list. * *"""" (my bold-italic) Thank you very much , Mr. Fairbairns -- luigi

2 3

Columnsets and footnote placement
by Elliot Clifton 09 Nov '07

09 Nov '07

Hi, Is there a way to place footnotes when using columnsets, so that they [the footnotes] span across the bottom of the page, like they do when using \startcolumn? TIA, Elliot

1 0

Fwd: Flow charts forgetting text
by Willi Egger 09 Nov '07

09 Nov '07

I tried to send the files off line to Aditya, I could not get the message through, so it comes to the list ... Wili Begin forwarded message: > From: Willi Egger <w.egger(a)boede.nl> > Date: November 8, 2007 8:28:01 PM GMT+01:00 > To: Aditya Mahajan <adityam(a)umich.edu> > Subject: Re: [NTG-context] Flow charts forgetting text > > Hi Aditya, > > sorry for the late reply! > > Please find attached the pdf and sorce (I added another \FLOWchart > [test] > > I do hope, that the problem can be fixed. > > Kr > Willi > > > On Nov 5, 2007, at 6:44 PM, Aditya Mahajan wrote: > >> Hi Willi, >> >> On Mon, 5 Nov 2007, Willi Egger wrote: >> >>> Your code compiles correctly here. Well with the following >>> version of >>> Context >>> >>> ConTeXt ver: 2007.10.03 12:52 MKII fmt: 2007.10.4 int: english/ >>> english >> >> >> Thank you for checking this. Can you send me the pdf file off- >> list? I do >> not get a X_t in the second flowchart, either on my machine (MKII >> 09.28) >> or on contextgarden. >> >> Aditya >> _____________________________________________________________________ >> ______________ >> If your question is of interest to others as well, please add an >> entry to the Wiki! >> >> maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ >> ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : https://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> _____________________________________________________________________ >> ______________ > > Willi Egger > w.egger(a)boede.nl > > > Willi Egger w.egger(a)boede.nl

2 1

table layout
by Wolfgang Schuster 09 Nov '07

09 Nov '07

Hi, I try currently to write a table with a repeated header on all pages and rules above and below the header and another rule below the table on all pages. I tried this now with all tables in ConTeXt but I can't the desired result from any of them. Tabulate has problems with rule below the header and did not support repeated footers. TaBlE has problems with the spacing of his rows below the header and at the bottom of the tables, it has also a problem with the spacing from the rule at the bottom. Natural Tables allow me to put a rule above and below the header but I'm unable to get rule at last row on every page, the "last" key for rows use always the last row of the hole table. I played also a little bit with textbackground but I have a few problems with the results, the background has always the width of the current textwidth and it takes always the topskip into account. What it tried so far is the following code: \setuppapersize[A7,landscape][A7,landscape] \setuplayout[lines=5] \starttext \tracetablestrue \setuptables[split=repeat] \starttablehead \HL \NC Row 1 \NC Row 2 \NC Row 3 \NC\AR \HL \stoptablehead \starttabletail \HL \stoptabletail \starttable[|l|l|l|] \NC Text \NC Text \NC Text \NC\AR \NC Text \NC Text \NC Text \NC\AR \NC Text \NC Text \NC Text \NC\AR \NC Text \NC Text \NC Text \NC\AR \NC Text \NC Text \NC Text \NC\AR \NC Text \NC Text \NC Text \NC\AR \stoptable \page \startbuffer[tabulate] \starttabulatehead \HL \NC Row 1 \NC Row 2 \NC Row 3 \NC\NR \HL \stoptabulatehead \starttabulatetail \HL \stoptabulatetail \starttabulate[|l|l|l|] \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \stoptabulate \stopbuffer \getbuffer[tabulate] \page \setuptabulate[header=repeat] \getbuffer[tabulate] \page \newconditional\tabulaterepeatfoot \settrue\tabulaterepeatfoot \def\dosplittabulatebox#1% {\resettsplit \def\tsplitminimumfreelines{2}% \def\tsplitminimumfreespace{0pt}% \setbox\tsplitcontent\box#1% \ifcase\tabulaterepeathead\or \setbox\tsplithead\vsplit\tsplitcontent to 3\lineheight \setbox\tsplithead\vbox{\unvbox\tsplithead}% \or \setbox\tsplithead\vbox{\hbox{\strut\tabulateparameter\c!title}}% \fi \ifcase\tabulaterepeatfoot %\setbox\tsplittail\vsplit\tsplitcontent to \lineheight %\setbox\tsplittail\vbox{\unvbox\tsplittail}% \setbox\tsplittail\vbox{\color[orange]{\hrule}}% \fi \handletsplit} \def\fulltabulatecontent {\tabulateheadcontent \tabulatecontent \ifcase\tabulaterepeatfoot\else \tabulatetailcontent \fi \removefunnytabulateline} %\tracetabulatetrue \getbuffer[tabulate] \page %\traceTABLEtrue \setupTABLE[split=repeat,frame=off] \setupTABLE[header][topframe=on,bottomframe=on] \setupTABLE[row][last][bottomframe=on] \bTABLE \bTABLEhead \bTR\bTH Row 1 \eTH\bTH Row 2 \eTH\bTH Row 3 \eTH\eTR \eTABLEhead \bTABLEfoot \bTR\bTD Row 1 \eTD\bTD Row 2 \eTD\bTD Row 3 \eTD\eTR \eTABLEfoot \bTABLEbody \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \bTR\bTD Text \eTD\bTD Text \eTD\bTD Text \eTD\eTR \eTABLEbody \eTABLE \stoptext I will also show you what I tried to get with textbackgrounds. \setuppapersize[A7,landscape][A7,landscape] \setuplayout[lines=5] \setupcolors[state=start] \startuseMPgraphic{tableback} pickup pencircle scaled 1pt; path p; p = (multipars[1]); draw p withcolor red; \stopuseMPgraphic \definetextbackground [mytab] [location=paragraph, width=local, mp=tableback] \starttext %\topskip=0pt \setuptabulate [before={\starttextbackground[mytab]}, after=\stoptextbackground] \starttabulatehead \HL \NC Row 1 \NC Row 2 \NC Row 3 \NC\NR \HL \stoptabulatehead \starttabulatetail \HL \stoptabulatetail \starttabulate[|l|l|l|] \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \NC Text \NC Text \NC Text \NC\NR \stoptabulate \stoptext Wolfgang

3 7

Re: [NTG-context] Easy way to start working with cyrillic? (Hans Hagen)
by Klaus Gena 09 Nov '07

09 Nov '07

Thanks a lot for your help ! I managed to get xetex talking with the help of the Texlive DVD and Lutz's tips. I'm a happy ConText user now. Klaus > > > Klaus Gena wrote: > > Hi, > > > > I am entirely new to Tex and Context. I installed the stand alone mswin > > context distro and manage to typeset Dutch texts without any problems, > using > > the manuals. > > > > I also need to typeset Russian texts, however, and I was wondering if > there > > exists a painless, 'out of the box', way to make Context understand > Russian > > (and not transliterating everything), or is it necessary to install > > additional fonts? > > > > The wikipage on the contextgarden site on Russian doesn't really give > any > > positive results, and browsing the mailinglist archives neither. > > just use context with xetex or luatex > > Hans > > > ------------------------------ > > Message: 7 > Date: Thu, 8 Nov 2007 13:18:33 +0100 > From: "Lutz Haseloff" <lutz.haseloff(a)googlemail.com> > Subject: Re: [NTG-context] Easy way to start working with cyrillic? > To: "mailing list for ConTeXt users" <ntg-context(a)ntg.nl> > Message-ID: > <a09128560711080418g20a4503do580d583a3c594df7(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > Hi Klaus, > > try this: > --------------- > % engine=xetex > \definetypeface[MyFace][rm][Xserif][TeX Gyre Pagella] > \setupbodyfont[MyFace,10pt] > \starttext > \midaligned{\tfb\bf Arkadi und Boris Strugazki} > \blank > \midaligned{\tfb\bf ??????? ? ????? ??????????} > \blank[7*big] > \midaligned{\tfc\bf Milliarden Jahre vor dem Weltuntergang} > \blank > \midaligned{\tfc\bf ?? ???????? ??? ?? ????? ?????} > \blank[5*big] > \midaligned{\tfa\bf Eine unter seltsamen Umst?nden aufgefundene > Handschrift} > \stoptext > --------------- > > if this doesn't work, you can mail me directly. > > Greetings > > Lutz > >

1 0

Font sizes using Chinese module
by Duncan Hothersall 09 Nov '07

09 Nov '07

Hello all. I hope this is quite a simple question. I'm using the Chinese module, with the font definitions in font-chi.tex, to typeset UTF-8 content. I can happily use the default sizes a, b, c, d and x, xx, xxx - so \bfd produces large bold, and \tfx produces small normal weight text. But I really need to be able to do the equivalent of \definedfont[Bold at 48pt]. Unfortunately this doesn't work - it produces normal text size and weight. Unfortunately it isn't easy to post an example, because you need UTF-8 content, and you need the fonts set up for Chinese (which I believe ConTeXt Live doesn't currently have). So I'm hoping that someone familiar with the workings of font-chi.tex can tell me how to get specific point sizes of specific fonts. Is there a unicode font equivalent of \definedfont? Or a way of adding an e and f size definition to the default set? Any help would be really appreciated, thanks. Duncan

5 7

Easy way to start working with cyrillic?
by Klaus Gena 08 Nov '07

08 Nov '07

Hi, I am entirely new to Tex and Context. I installed the stand alone mswin context distro and manage to typeset Dutch texts without any problems, using the manuals. I also need to typeset Russian texts, however, and I was wondering if there exists a painless, 'out of the box', way to make Context understand Russian (and not transliterating everything), or is it necessary to install additional fonts? The wikipage on the contextgarden site on Russian doesn't really give any positive results, and browsing the mailinglist archives neither. Thanks, Klaus Gena

4 3

doc at minimals
by luigi scarso 08 Nov '07

08 Nov '07

Just discovered http://minimals.contextgarden.net/doc -- luigi

4 3

Flow charts forgetting text
by Aditya Mahajan 07 Nov '07

07 Nov '07

Hi, Something is broken in flowcharts. If I typeset the same flowchart twice, the comments are missing from the second chart. For example \usemodule[chart] \setupFLOWcharts [%option=test, bodyfont=11pt, nx=4, ny=1, offset=11pt, dx=\bodyfontsize, dy=0.65\bodyfontsize, width=6\bodyfontsize, height=2.5\bodyfontsize, ] \startFLOWchart[test] \startFLOWcell \name {source} \location {1,1} \shape {procedure} \text {Source} \connection [rl] {encoder} \comment [t] {$X_t$} \stopFLOWcell \startFLOWcell \name {encoder} \location {2,1} \shape {procedure} \text {Encoder} \stopFLOWcell \stopFLOWchart \starttext \FLOWchart[test] \input knuth \FLOWchart[test] \stoptext The second flow chart does not have $X_t$. Can someone tell what is going on? Aditya

3 6

[Fwd: [Fontforge-devel] ORA pro nobis]
by Taco Hoekwater 07 Nov '07

07 Nov '07

I assume some of you may be interested in this book as well. Best wishes, Taco -------- Original Message -------- Subject: [Fontforge-devel] ORA pro nobis Date: 09 Oct 2007 12:57:06 -0700 From: George Williams <gww(a)silcom.com> Organization: FontForge To: fontforge-devel(a)lists.sourceforge.net CC: fontforge-users(a)lists.sourceforge.net O'Reilly & Associates has finally shipped the English translation of Yannis Haralambous's Fonts & Encodings It has a large section of FontForge, though I fear it may be a bit out of date by now. ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ Fontforge-devel mailing list Fontforge-devel(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fontforge-devel

2 1

itemize a list
by Hans van der Meer 07 Nov '07

07 Nov '07

It is my intention to place a list inside an itemize, and therefore prepend a \item before every list item. Thus: \startitemize \placelist[Topic][label=no,pagenumber=no,before=\item]}% \stopitemize However this doesn't work but instead gives the following error: ! Missing } inserted. <inserted text> } <to be read again> \endgroup \stopitemgroup ...xtindentation \fi \fi \endgroup \doglobal \decrement (\ite... \Topics ...enumber=no,before=\item ]}\stopitemize \def \FirstPage {Topics} l.1 \Topics{Synopsis} ? \doendoflist ->\stoppacked \endgroup \Topics ...[label=no,pagenumber=no,before=\item ]} \stopitemize \def \FirstPa... Placing the "before=\item" in the \setuplist makes no difference. Why? How can I realize the goal: placing the list entries each as an item in an itemized list? Hans van der Meer

3 2

Re: [NTG-context] Font sizes using Chinese module
by Duncan Hothersall 07 Nov '07

07 Nov '07

Hans said: > \definefontsize[e] > > \setupfontenvironment > [default] > [e=4] > Ah, thanks. Using \setupbodyfontenvironment as the second command did the trick. I guess there is no easy way of directly calling a specific font at a specific size? No worry, this sort of solution will allow me to do what I need for now. Thanks Hans. Duncan

3 3

\blank[big]
by Vyatcheslav Yatskovsky 07 Nov '07

07 Nov '07

Hello, Excuse me, but what 'big' stands for in \blank[big]? Every time I use it, I expect really big white space, but get only hardly noticeable one. Best regards, Vaytcheslav

2 1

Re: [NTG-context] Font sizes using Chinese module
by Duncan Hothersall 07 Nov '07

07 Nov '07

Hans (07/11/2007 16:09) said: >> Btw: Is there any reason for not using XeTeX (or LuaTeX in the future) >> for Chinese? (To be honest: I have absolutely no idea whether it works >> and how good it works if at all, but I would expect less problems >> there.) >> > > i bet that duncan uses it in some workflow that has to be stable i.e. no > moving targets like xetex or luatex (yet) > > Hans Exactly right. :-) We have some big plans for LuaTeX across Latin, Arabic and Chinese alphabets, but for now we have to stick to the old tried and tested... Duncan

1 0

Deleting temporary files with metapost
by Maurício 06 Nov '07

06 Nov '07

Hi, I'm using: texexec --purgeall my_file.tex to have temporary files deleted after processing. However, when I use metafun (using \startuseMPgraphics etc.) a single file is left, with extension '.mp.keep'. Is it possible to ask Context not to leave even that file? Thanks, Maurício

1 0

Test message---different mail server.
by John Culleton 06 Nov '07

06 Nov '07

-- John Culleton Precision Typesetting Able Indexers and Typesetters http://wexfordpress.com

1 0

Test message, different mail server.
by John Culleton 06 Nov '07

06 Nov '07

My isp doesn't like ntg.nl for some reason. -- John Culleton Resources for every author and publisher: http://wexfordpress.com/tex/shortlist.pdf http://wexfordpress.com/tex/packagers.pdf http://www.creativemindspress.com/newbiefaq.htm http://www.gropenassoc.com/TopLevelPages/reference%20desk.htm

1 0

Re: [NTG-context] ec-lmr12 not loadable: Metric (TFM) file
by Dalyoung Jeong 06 Nov '07

06 Nov '07

Dear Mojca, Thank you for the reply. As you did, I send my problem to the list. I think that I am a problem maker. I wonder why the output of XeTeX+ConTeXt was changed after the upgrade to Leopard. I didn't change anything in TeX system. I just upgraded the OSX. But nicely working XeTeX+ConTeXt had a problem with the korean commercial fonts.(no korean letters were appeared.) I installed TeXlive using i-installer(gwTeX) with Mac OSX Leopard, Latest stable ConTeXt, XeTeX 0.996 I made a short test file and a typescript file for the test. I have tested in several ways. 1. In XeTeX, everything is OK. Korean letters and greek capitals are appeared well. I thinkt that it used xdv2pdf. This is XeTeXk, Version 3.141592-2.2-0.996 (Web2C 7.5.6) file:line:error style messages enabled. entering extended mode (./test-font.tex [1] ) (see the transcript file for additional information) Mon Nov 5 16:56:15 graph.ssu.ac.kr xdv2pdf[21489] <Error>: WARNING: Type1 font data returned by OFAStreamPSDownload isn't in the correct format required by the Adobe Type 1Font Format specification. ... Output written on test-font.pdf (1 page). Transcript written on test-font.log. after adding \starttext and \stoptext 2. In XeTeX+ConTeXt, no ouput because of the korean commercial font. [1 ** NOTICE: This document contains a `Preview & Print only' licensed font ** ] ** ERROR ** CFF: Invalid character. Output file removed. Output written on test-font.pdf (1 page). Transcript written on test-font.log. 3.In XeTeX+ConTeXt without the definition of the korean commercial font: No error messeges, defined korean font and greek capitals are appeared well. But korean letters(except the manually defined korean font) are appeared as blanks. English letters are OK. 4. I used typescript file "type-xkor2.tex" No error message. English letters are OK. But korean letters(except the manually defined korean font) and the greek capitals are appeared as blanks. I think that Leopard has a problem with xdvipdfmx. It is just my guess. I attached test file and a typescript file. I used some commercial fonts but they are freely distributed as demo at the following site: "www.softmagaic.co.kr " After connecting it, you can see "otf sm font" in the third rectangle at the right side of the frame. You can download 5 fonts. I used three of them in the typescript file and one of them in the test file. Thank you again. Best regards, Dalyoung

3 2

two questions
by Dalyoung Jeong 06 Nov '07

06 Nov '07

Hi all, Recently, I had a problem using XeTeX+ConTeXt after the upgrade to Leopard. You may read my mails to the list already. Let me describe it in short. XeTeX and XeLaTeX worked well. But in the output via XeTeX+ConTeXt, all korean letters are shown as blank or as the series of squares([s6] mode)when I set mainfont using some of the commercial fonts. All the files were worked OK before the upgrade. I'd like to you two things. 1. Is it possible to use xdv2pdf to produce pdf file using the command "texmfstart texexec"? 2. How to update xetex and xdvipdfmx? I downloaded latest file of them from "minimal.context.wiki". I replaced the xetex and xdvipdfmx in the folder /usr/texbin/ with the latest files, but it made another lm font error. I am using Mac with OSX Leopard, TeXlive 2007(gwTeX). Since I have very little knowledge about TeX, I always ask you for help. Thank you for the listening. Best regards, Dalyoung

1 0

xml misc
by Andrea Valle 05 Nov '07

05 Nov '07

Hi to all, I' ve started playing with xml --> context. I've read the docs but even if I am able to do some very basic operation I'm in troubles doing my first real experiment. I've already generated a book from the collection of html help files of the SuperCollider language using a cumbersome python script. But I was guessing that probably using xml mapping would make my life easier. An example file to be processed is here: http://supercollider.svn.sourceforge.net/viewvc/supercollider/trunk/ build/Help/Style%20Guide/Documentation%20Style%20Guide.html?view=log The html is w3c compliant and being automatically generated seems to be consistent. I'm able to do easily stuff like this, which is a promising start: \startenvironment scEnv \enableregime[utf] \defineXMLenvironment [body] \starttext \stoptext %\defineXMLenvironment [style] \starthiding \stophiding \defineXMLcommand [p] \par \defineXMLgrouped [b] \bf \stopenvironment But: 1. how do I simply skip undesired tags? The \start-\stophiding trick (which in any case does not work: why?) was a hack in order to not typeset the stile tags 2. how can i map class attributes in order to specify for each of them e.g fontname, points, color, indenting? Thanks as usual Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong) -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - DAMS Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> andrea.valle(a)unito.it -------------------------------------------------- I did this interview where I just mentioned that I read Foucault. Who doesn't in university, right? I was in this strip club giving this guy a lap dance and all he wanted to do was to discuss Foucault with me. Well, I can stand naked and do my little dance, or I can discuss Foucault, but not at the same time; too much information. (Annabel Chong)

3 8

Fatal format file error; I'm stymied
by Ernesto Schirmacher 05 Nov '07

05 Nov '07

After many years as a LaTeX user I'm attempting to switch over to ConTeXt. I recently upgraded my operating system to Ubuntu 7.10 (on an AMD64 machine) and got the TeXLive and ConTeXt packages from the Ubuntu repositories. I tried compiling a very simple document: \starttext Hello this is \ConTeXt. \stoptext using the command: texexec simple.tex and got the following output on my terminal: TeXExec | processing document 'simple.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file simple.top TeXExec | using randomseed 898 TeXExec | tex engine: pdftex TeXExec | tex format: cont-en This is pdfTeXk, Version 3.141592-1.40.3 (Web2C 7.5.6) %$-line parsing enabled. (/usr/share/texmf/web2c/natural.tcx) ---! cont-en.fmt was written by pdfetex (Fatal format file error; I'm stymied) TeXExec | runtime: 0.177424 Clearly something is not working properly and I suspect the incompatibility between This is pdfTeXk... and ---! cont-en.fmt was written by pdfetex is the source of all trouble here. Could someone please point me in the right direction to resolve this? Thanks in advance, Ernesto

6 5

Screen not wanted
by Hans van der Meer 05 Nov '07

05 Nov '07

I have prepared a movie in one of the presentation styles and set this ready in the followwing way: \defineoverlay [name] [{\framed[height=\overlayheight, width=\overlaywidth,% background=color, backgroundcolor=yellow]% {\midaligned{title text}}}] \Subject {\renderingmenu[film]\qquad\color[darkgray]{$15^\prime 12$}} \midaligned{% \framed[offset=0pt, strut=no, background={foreground,name}]% {\placerenderingwindow[movie][film]} }% The problem is this: In the upper left corner the word "Screen" is placed and I cannot get rid of it. Searching in the sources did not reveal enough to spot a macro putting it there. The strange thing is that this happens in both the TeXShop previewer and in Apple's Preview application but not in the Adobe version 8.1 reader, GraphicConverter and Safari (I am working on MacOSX 10.4.10). Does someone know its origin? Does it occur on other PC types as well or is it typical for MacOSX? Or is it something in the pdf that shows up under certain circumstances? Hans van der Meer

1 0

Re: [NTG-context] Notepad++ colour settings
by richard.stephens＠converteam.com 05 Nov '07

05 Nov '07

>> I have downloaded the latest Notepad++ and ConTeXt settings as suggested >> by Professor Hamid and I'm enjoying the experience of using them! >> >> However, I do not really like the colour scheme and tried to alter the >> background colours by editing "Application >> Data/Notepad++/UserDefineLang.xml", shutting down Notepad++ and starting >> up again (via Npp.bat), but no change. I also tried editing the "tex" >> entry in "Application Data/Notepad++/stylers.xml", but no joy. >> I tried going to menu item Settings - Style Configurator, but Context >> isn't in the list of languages. >> >> How can I alter the default colour settings for ConTeXt, please? > > Use the User Define Language dialog (the button to the left of the red-dot > button) > > http://notepad-plus.sourceforge.net/uk/UserLanguageDefineSystem-HOWTO.php > > Choose ConTeXt and adjust anything you like (including color)! > > Also, in Settings - Style Configurator, configure Global Styles. > There is also a Global Override option. > > So there is a global color scheme and a language-specific one. > > Best wishes > Idris Idris, Thanks for your help. I was able to change the foreground colours from the "User Define" dialogue, but the background colour never changed. Thanks to your pointer, I eventually found the global override for the background colour under "Settings - Styler Configurator - Global Styles - Global Override". Regards, Richard

1 0

Problems with diagrams
by Geoffrey Martin 04 Nov '07

04 Nov '07

Does anyone have any suggestions on processing docs with many commutative diagrams in ConTeXt. Depending on the method (I have used xypic and dcpic) I can do between 6 and 8 diagrams in a doc before ConTeXt crashes reporting pdftex: Assertion failed, and Window reporting and access error. I am running MikTeX under Windows 2000. It looks like memory problems but I would like to be sure. I have not been able to find a system requirements for ConTeXt, Also, in the process of trying to work around this difficulty I have noted that ConTeXt is able to run the diagram making plain tex macros in eplain and taylor. Thanks you any info you can provide] Geoffrey Martin University of Toledo

2 2

How to prevent a page break?
by Maurício 04 Nov '07

04 Nov '07

Hi, How do I prevent a page break between two paragraphs (actually, between a paragraph and an item list that follows it)? I found '\page[no]' in the documentation, but I don't know if that's the standard way to do that. Thanks, Maurício

2 1

40e NTG bijeenkomst Utrecht
by Willi Egger 03 Nov '07

03 Nov '07

Beste leden, beste TeX gebruikers, De aankomende NTG-bijeenkomst is op 9-11-2007. De bijeenkomst begint om 10 uur. Zoals eerder medegedeeld heeft de dag geen thema. Het programma bestaat uit een update op het LUATEX-project verzorgd door Hans Hagen en Taco Hoekwater. Verder zal Johann de Moor zijn ervaringen als alfa met Latex uit de doeken doen. Het wordt beslist weer een interessante dag, die je niet mag missen. De bijeenkomst is in het Buys Ballot laboratorium (BBL), onderdeel van het Fysica-complex, op de 4e verdieping. Voor de route zie http://www.cs.uu.nl/docs/reach/ en http://www1.phys.uu.nl/faculteit/fysicacomplex/ Parkeren is het makkelijkst op het Princetonplein. Willi Egger Secretaris NTG

1 0

Notepad++ colour settings
by richard.stephens＠converteam.com 03 Nov '07

03 Nov '07

I have downloaded the latest Notepad++ and ConTeXt settings as suggested by Professor Hamid and I'm enjoying the experience of using them! However, I do not really like the colour scheme and tried to alter the background colours by editing "Application Data/Notepad++/UserDefineLang.xml", shutting down Notepad++ and starting up again (via Npp.bat), but no change. I also tried editing the "tex" entry in "Application Data/Notepad++/stylers.xml", but no joy. I tried going to menu item Settings - Style Configurator, but Context isn't in the list of languages. How can I alter the default colour settings for ConTeXt, please? Richard Stephens

5 6

MathML in Metafun
by Maurício 03 Nov '07

03 Nov '07

Hi, Is it possible to use MathML inside a Metapost or Metafun label? Thanks, Maurício

3 3

New build problems
by Vyatcheslav Yatskovsky 03 Nov '07

03 Nov '07

Hello New context build is not friendly at all: "The application failed to initialize properly (0xc00000022)" windows fatal error is displayed twice. Here is the log: G:\rsync\win\texmf-win>texexec --make --luatex TeXExec | using search method 'kpsewhich' TeXExec | updating file database TeXExec | using tex engine luatex TeXExec | using tex format path ./luatex TeXExec | unable to make format due to lack of permissions TeXExec | using mp engine mpost TeXExec | using mps format path . TeXExec | generating mps format metafun TeXExec | TeXExec | mps engine path: . TeXExec | TeXExec | TeXExec | runtime: 70.969 Sure, I still have to play with env variables (nearly all of them require updating when migrating to new build). Where the LUAINPUT var should point to? And why it is not found in setuptex.bat? Is it needed at all? Best, Vaytcheslav

3 12

Fwd: ec-lmr12 not loadable: Metric (TFM) file
by Mojca Miklavec 03 Nov '07

03 Nov '07

Hello Dalyoung, I hopw you don't mind if I forward this to the mailing list, but I won't be home for some days, and for some problems you mention here I have no idea what could go wrong. On 11/3/07, Dalyoung Jeong wrote: > Dear Mojca, > > Thank you for your concern. > > Yesterday, I removed TeX and reinstalled gwTeX via i-installer. > Since there are no lm*.map files in the folder gwTeX/texmf.texlive/ > fonts/map/dvipdfm, > I run "ctxtools --dpx --force /usr/local/gwTeX/texmf.texlive" and it > produced the files in the context folder. > After that I made format file using > sudo texmfstart texexec --make --all --pdftex > sudo texmfstart texexec --make --all --xetex > > It create format files in the folder > ~/Library/texmf/web2c/{pdftex, xetex} > > I run a file which was good before the upgrade to Leopard. > Then it runs OK without error but the message > "** NOTICE: This document contains a `Preview & Print only' licensed > font ** " > was shown. No lm error either. That notice is normal/usual for XeTeX. > However, I can see series of small squares instead of text. Only math > equations are shown correctly. In Latin Modern? Which ConTeXt version? Did you only install TeXLive or also ConTeXt updater (with the latest version of ConTeXt)? Small squares could be a consequence of the old Type1 fonts instead of OpenType (in case you have an old version). > I didn't change any setting after upgrade. > > So I checked fonts one by one. Here are results: > > 1. Almost all fonts are working OK in plain xetex. But some comercial > fonts are not. > "CFF:invalid character" and no output. Hmmm ... you need to ask about that on the XeTeX mailing list. Mention which fonts exactly are causing problems and where you got them. > 2. Default fonts in the system(AppleMyungjo, AppleGothic, #PilGi ,...) > are working OK in XeTeX+ ConTeXt. I defined fonts using the command > \font. And greek capital, like "\Pi, \Phi, \Gamma,...) are appeared > correctly. > 3. If I tried to use some commercial fonts, then I got either > "CFF:invalid character" message and no pdf output for some fonts or no > error message but a series of blank squares. > 4. If I use typescript file instead of \font command, the greek > capitals like "\Pi, \Phi, \Gamma,...) are not appeared correctly > while \Alpha, \Beta are appeared well. Can you send exact typescripts you're using? Failure with uppercase greek is usually a typescript problem (I have experienced it very often). > I don't know well about the running process of ConTeXt, but I assume > that xdvipdfmx is not compatible with Leopard. If I know the way to > make pdf file using the path ".tex-> .xdv -> .pdf", I'll test it. But > I don't know how to do it. There is no command option of texexec. See also recent messages on the XeTeX mailing list. And see @@runoptions['xetex'] = ['--8bit','-output-driver="xdvipdfmx -E -d 4 -V 5"'] in scripts/context/ruby/base/tex.rb But if you change sdvipdfmx to xdv2pdf, you'll have problems with Latin Modern (they're hardcoded in the ConTeXt format and file names don't work with xdv2pdf, so you would need to change definitions in type-oft.tex I guess). > Hence, my current problem is that I can not use some otf fonts which > was good before the upgrade. > Is there a way to cancel "CFF:invalid character" message and series of > blank squares? Why is it appeared after the uipgrade? And is there a > way to dispaly greek capitals correctly? I have no idea. But please post a complete example. You can also try to upgrade to a newer version of XeTeX and xdvipdfmx (backup the old version before doing so) from http://minimals.contextgarden.net/bin/xetex/osx-intel/bin/, although this won't solve your exact problems. Make sure that you're using the latest stable version of ConTeXt (2007.09.28). The problems with \font command need to be reported to the XeTeX mailig list (name the fonts and where you got them from), for the ConTeXt-related problems, attach a miniminal example together with your typescripts. Mojca > Thank for listening. > > Best regards, > Dalyoung > > > > > On 2007. 11. 02, at 오전 5:41, Mojca Miklavec wrote: > > > Can you please send me a complete example (a simple document + log > > files)? > > > > Thanks, > > Mojca > > > > On 11/1/07, Jeong Dalyoung wrote: > >> Dear Mojca, > >> > >> Thank you for the reply. > >> > >> I'd like to tell you what happened in my computer. > >> > >> Two days ago, I upgraded OSX to Leopard and tested the TeX. > >> I tried XeConTeXt for a file which worked fine before the upgrade. > >> It's body font was set to some korean otf fonts. > >> > >> It run smoothly(with some blanks between many lines of log in the > >> terminal. This appeared sometime ago after the new updates of > >> ConTeXt > >> and XeTeX). There is no error at all in the terminal. > >> However, I got many squares in the pdf file instead of Korean > >> characters. Math and English appeared well. > >> The only change is the Leopard upgrade. > >> > >> Hence I reinstalled gwTeX TeXlive and ConTeXt. And I got lm font > >> error. There is lm otf fonts in gwTeX.texlive/fonts/opentype/pub/lm/ > >> > >> There is another message in the terminal:"CFF:invaid character" > >> > >> As you suggest, I downloaded xetex and xdvipdfmx from ConTeXt site > >> but > >> It doesn't cure the problem. > >> > >> I should upgrade to new OSX later. > >> Do you have any idea for this? > >> > >> Thank you. > >> > >> Best regards, > >> > >> Dalyoung > >> > >

1 0

MathML in Context
by Maurício 03 Nov '07

03 Nov '07

Hi, I've been trying to learn how to insert MathML in Context file. I found many examples of how MathML code should look like, formula or presentational, but no example on how to actually insert it in Context. I tried \math{ mathml stuff} and it didn't work. Can you guys point me to an example? Thanks, Maurício

2 2

Fatal format file error; I'm stymied THANKS for HELP
by Ernesto Schirmacher 03 Nov '07

03 Nov '07

Thank you to Luigi, Taco, Hans, and Aditya for all your help and suggestions. As it turned out Taco's suggestion of an old format was right on and Aditya's reassurance that the Ubuntu repositories were not at fault I found some old format files in my home directory that TexExec was seeing before finding the correct ones in the texmf tree. Now it seems I'm ready to start my journey into the world of ConTeXt. Thanks again, Ernesto

1 0

+1 ConTeXt noobie/user
by Matija Šuklje 03 Nov '07

03 Nov '07

OK, so far I've been reluctant, but from what I saw so far, I think you can call me a new ConTeXt user or more accurately a noobie. I think I figured out how to tweak Kile into being usable (not perfect yet though) as a ConTeXt editor ...kudos to the devs who put so many options to tweak into Kile and to Michael Krauss for the Kate highlighting to make this possible. Now all I have to do is wait for TeX Live to become stable on amd64 in Gentoo's portage tree and I'll finish the switch. :) I still have a lot of questions and as of yet didn't manage to write a document in ConTeXt, but I'll try not to bug the list too often and plan to search the wiki et al. before I feel I am able to question anything really. best regards and thanks for ConTeXt, Matija Šuklje -- gsm: +386 41 849 552 e-mail: matija.suklje(a)rutka.net www: http://matija.suklje.name aim: hookofsilver icq: 110183360 jabber/g-talk: matija.suklje(a)gabbler.org msn: matija.suklje(a)rutka.net yahoo: matija_suklje

3 10