- ntg-context - NTG Mailing Lists

I can't find file `TeXGyreChorus-MediumItalic'.
by Ciro Soto 03 Jun '09

03 Jun '09

I had a file fully functional, but after I did a "ctxtool --updatecontext" it is not working anymore. it complains with the messages below. I am running in linux Ubuntu 9.04 - the Jaunty Jackalope. How do I fix this problem? thank you Ciro PS: FYI: CtxTools | context version: 2009.05.29 23:34 (/usr/local/share/texmf/tex/context/base/context.tex) ERROR MESSAGE: kpathsea: Running mktexmf TeXGyreChorus-MediumItalic ! I can't find file `TeXGyreChorus-MediumItalic'. <*> ...nstopmode; input TeXGyreChorus-MediumItalic Please type another input file name ! Emergency stop. <*> ...nstopmode; input TeXGyreChorus-MediumItalic Transcript written on mfput.log. grep: TeXGyreChorus-MediumItalic.log: No such file or directory mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input TeXGyreChorus-MediumItalic' failed to make TeXGyreChorus-MediumItalic.tfm. kpathsea: Appending font creation commands to missfont.log. ! Font \*prosefont12ptcgtfcg*:=TeXGyreChorus-MediumItalic at 12.0pt not loadabl e: Metric (TFM) file not found. <to be read again> \relax \definefontglobal ...dcsname \lastfontname \relax \expandafter \let \expanda... \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \fontstrategy ...me \fontclass #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \iftryingfont \... ... l.4 \centerline{\booktitlefont \finaltitleA } ? ^C! Interruption. \definefontglobal ...dcsname \lastfontname \relax \expandafter \let \expanda... \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \fontstrategy ...me \fontclass #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \iftryingfont \... <argument> \getvalue {\@style@ \fontstyle } \edef \fontstyle {\fontstyle }\if... ... l.4 \centerline{\booktitlefont \finaltitleA } ?

3 6

another sectioning problem in beta
by Henning Hraban Ramm 03 Jun '09

03 Jun '09

MkIV 2009.06.03 11:48 If I use \chapter and \section, numbering is ok (1 Chapter, 1.1 Section, 1.2 Section, 2 Chapter etc.), but when I define my own sectioning levels, everything gets running numbers (1 Chapter, 2 Section, 3 Section, 4 Chapter etc.). --- snip --- \setuphead[chapter][page=no] \definehead[Kapitel][chapter] \definehead[Abschnitt][section] \starttext \dorecurse{20}{% \expanded{\Kapitel{My chapter \recurselevel}} \expanded{\Abschnitt{My Zapf \recurselevel}} \input zapf \expanded{\Abschnitt{My Tufte \recurselevel}} \input tufte } \completecontent[criterium=all] \stoptext --- snip --- Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 1

Page shifting & crop marks
by Nicolas Girard 03 Jun '09

03 Jun '09

Hi when shifting pages like in the example below, it seems to me like the crop marks should be shifted accordingly. What do you think ? Thanks in advance, Nicolas \setuppapersize[CD][A4] \definepageshift[test][horizontal][30pt,-30pt,20pt,-20pt,10pt,-10pt,0pt,0pt,0pt,0pt,10pt,-10pt,+20pt,-20pt,30pt,-30pt] \setuppageshift[test] \setuplayout[margin=5mm,marking=on,location=middle] \setuparranging[2*2*4,rotated] \setuppageshift[paper][test] \showframe \starttext \dorecurse{14}{\input tufte} \stoptext

2 1

impose.pdf
by Nicolas Girard 03 Jun '09

03 Jun '09

Hi, the wiki page on imposition mentions such http://www.ntg.nl:8061/impose.pdf file, which doesn't seem to be accessible. Could you please make it accessible again ? Thanks in advance, nicolas

2 1

Re: [NTG-context] Cannot run Lilypond
by Vyatcheslav Yatskovsky 03 Jun '09

03 Jun '09

Thanks for the interest. I can run Lilypond from command line from any location. Also, I can run pstopdf, but the fact is that i didn't install GhostScript. But I'm not sure if it works, bacause when I run it it says nothing and exits. When I compile my Lily example, lily1-lilypond-1.tmp is created in both document dir and lilytemp subfolder. But lilypdfs remains empty. Best, Vyatccheslav

2 1

\setuppageshift and \setuparranging
by Nicolas Girard 03 Jun '09

03 Jun '09

Hi, I'm testing ConTeXt's imposition abilities on a cd booket project. I'd like pages to be shifted in order to compensate paper thickness. Running the following code leads to pages that are properly shifted ; but when uncommenting the line with \setuparranging, pages aren't shifted any longer. What's wrong with my code ? Thanks in advance, Nicolas \setuppapersize[CD][A4] \definepageshift[test][horizontal][10pt,20pt,30pt,40pt,50pt] \setuppageshift[test] \setuplayout[margin=5mm,marking=on,location=middle] %\setuparranging[2*2*4,rotated] \setuppageshift[test] \showframe \starttext \dorecurse{14}{\input tufte} \stoptext

2 2

Lilypond module problem
by Lutz Haseloff 03 Jun '09

03 Jun '09

Hi Mojca, Christopher, Hraban, Wolfgang, the new lilypond module don't build new lilypond pdf files when I change the tex input file. In the log i get: system : module lilypond loaded (c:/contextminimal/texmf-local/tex/context/third/lilypond/t-lilypond.texMTXrun | file './lilytemp/lily1-lilypond-1.tmp' is unchanged MTXrun | file './lilytemp/lily1-lilypond-1.eps' is unchanged loading : LilyPond module My testfile lily1.tex adopted and slightly changed from Vyatcheslav \usemodule[lilypond] \starttext There are some notes \lower 8.2pt\hbox{\lilypond[fragment=true]{\relative c' {c d e f}}} embedded in this line. \stoptext Perhaps this is a feature? Greetings Lutz

2 7

\setuphead[section] who do subsection inherit and how to set something just for sections?
by tristramg＠gmail.com 03 Jun '09

03 Jun '09

Hello, Sorry if you get this email twice. I tried posting while I wasn't yet member of the mailing list. I didn't find where I can get more informations about this issue: I want to change the apparance of a \section so I did: \setuphead[section][style=\bf] \starttext \section{foo} \subsection{bar} \stoptext However, subsection is also in bold. If y do textstyle instead of style, then subsection doesn't inherit the style. So I have two questions: – in which documentation is described what parameters are inherited or not? – how can I change the formating of a section without changing the subsection? Thanks a lot for your help. Regards Tristram

2 1

MKIV doesn't support units module?
by Zhichu Chen 03 Jun '09

03 Jun '09

Well, I shouldn't say the module units is not fully supported, but it won't give me what I want in MKIV. Those units it made are in italic shape but I really need them to be upright. I think I don't need to provide a test file, 'cause any files don't work for me. -- Best Regards Chen ---------------------------------------------------------------- Zhi-chu Chen | Shanghai Synchrotron Radiation Facility No. 2019 | Jialuo Rd. | Jiading | Shanghai | P.R. China tel: 086 21 5955 3405 | zhichu.chen.googlepages.com | www.sinap.ac.cn ----------------------------------------------------------------

2 3

TOC with simpleslides
by Mohamed Bana 02 Jun '09

02 Jun '09

Hi all, is it possible to get a TOC with this module? my attempts so far just produce an empty 'Content' heading. thanks

2 2

Axel
by Wolfgang Schuster 02 Jun '09

02 Jun '09

Hi all, Fontshop offers a new font made for Spreadsheet tables and offers it with a advertising price of 10€ (outside Germany 20€) till the end of June -> http://beta.fontshop.de/fontfamilylisting.htm?font.qsearch.fontname=Axel%20… To get a first glance at the font take a look at the attached example or test it only: http://www.typoberlin.de/blog/archives/1625 Wolfgang

1 0

Put PDF viewer into "Single page layout mode"
by Vyatcheslav Yatskovsky 02 Jun '09

02 Jun '09

Hello, How to put PDF viewer into "Single page layout mode"? The information in http://wiki.contextgarden.net/PDF_startview is not sufficient. Best, Vyatcheslav

1 0

t-lilypond.tex calls invalid lilypond command-line option
by Richard Chonak 02 Jun '09

02 Jun '09

Greetings from a new user! When trying out lilypond from context for the first time yesterday, I found that t-lilypond.tex invokes lilypond with a command-line option "-b", which is not valid in lilypond 2.12. \def\LP{texmfstart --ifchanged=\lily!filename.tmp --exec bin:lilypond -b eps -dno-gs-load-fonts -dinclude-eps-fonts \lily!filename.tmp} To illustrate the problem: I was using the "Starlight" sample on http://wiki.contextgarden.net/LilyPond . Well, I wrapped the sample code in \starttext ... \stoptext . When I changed "-b eps" to "-dbackend=eps", lilypond executed successfully and I started getting proper results. (Though, please note, I had to delete the various temporary files produced in the unsuccessful attempts first.) Is this a known problem? Best wishes-- --Richard Chonak

2 1

Re: [NTG-context] Lilypond module problem
by Henning Hraban Ramm 02 Jun '09

02 Jun '09

Am 2009-06-02 um 16:01 schrieb Mojca Miklavec: >> MTXrun | file './lilytemp/lily1-lilypond-1.eps' is unchanged > > So you now create a subfolder called lilytemp? The name is even configurable. And I create another subfolder for the completed pictures. > I like the idea and > would be really glad to have a global feature to create some "context" > or "context-tmp" folder (or whatever) and put all the junk there ... > The same wheel needs to be reinvented in every single module. (I have > dozens of files lying in every single folder as well.) That's why I asked before, if there was some "tempdir" feature already in LuaTeX or ConTeXt. (I know there's io.tmpfile, but that's not useful here.) This "wheel" is really simple, and I guess it's better anyway to be able to use a different directory for each module, so I don't mind if it's re-implemented. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

1 0

nice link
by Hans Hagen 02 Jun '09

02 Jun '09

handy for info about languages and so ... http://www.wolframalpha.com/ you can also key in formulas ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

asymptote support
by Mojca Miklavec 02 Jun '09

02 Jun '09

Hello, Just to let you know - thanks to John Bowman (Michail Vidiassov is also working on it) these are some latest posts from asymptote developers on their forum - if anyone would like to play with asymptote, feel free to test. I didn't take a look, but John Bowman says that he needed null.tex to get context into interactive mode for some reason. Any clue about that? Mojca PS: I really really have to avoid the temptation to get distracted in the next few days/weeks unless I find an excuse that I need to make 3D/movies for my reports (which is not so unlikely to happen after all :) I have converted asycolors.sty; if anyone wants to take a look at asymptote.sty feel free to take it over. I might come back to it, but not right now. My quick first impression is that it does something similar to t-gnuplot, t-r, t-vim, t-lilypond, etc., that is: it defines some high-level commands, writes a file, lets asymptote process it and then includes the resulting graphic back. PPS: Recent Asymptote logs say "Updates to facilitate TeXLive builds." Sounds promissing. ---------------------------------------------------------------------- Good news: After digesting the advice /.../, I have been able to implement full support for a context tex engine in 2D. First of all, with TeXLive 2008 it is necessary to configure both lua and context: luatools --generate context --make We also rely on the empty tex file misc/null.tex. Hopefully everyone has that. We use this to get into context interactive mode, for the tex pipe (phase 1 of Asymptote's 2-phase typesetting system): context misc/null This was a crucial trick that I did not see documented anywhere. I didn't like the need for the \hbox but I too could not find a way around this; it seems that context takes liberties with the vertical spacing (glue?) otherwise, in a seemingly unpredictable manner. I was able to work around the one problem that I could forsee, with \eject (newpage() in asy, for multipage output). Everything appears to be working: label clipping, minipage, and even functionshading. This was the benefit of using specials; once the high-level code was in place, all of the low-level support was ready to go. The only thing that I haven't tested is inlinetex mode with the context tex engine. Could someone please test this for me? Thanks. ---------------------------------------------------------------------- I checked that -inlinetex -tex context appears to be generating the right files. Now all that needs to be done is for someone familiar with context to port asymptote.sty to a context module. ---------------------------------------------------------------------- I forgot to mention that context support is committed to svn and will be in 1.74 release (likely tomorrow). Regarding fonts, one can either use the low-level TeX \font way using fontcommand or, as the following contextfonts.asy example illustrates, the high-level way (see the definition of font in plain_pens.asy): settings.tex="context"; texpreamble("\usetypescript[iwona][ec]"); texpreamble("\usetypescript[antykwa-torunska][t5]"); label("$A$",0,N,font("iwona")); label("$A$",0,S,font("antykwa")+red); ----------------------------------------------------------------------

4 4

Cannot run Lilypond
by Vyatcheslav Yatskovsky 02 Jun '09

02 Jun '09

Hello, I gave a try to LiliPond today, but it doesn't work for me. 1) I've installed LilyPond 2.12.2 on Windows 2) Ran a simple example \usemodule[lilypond] \starttext There are some notes \lilypond{ \relative{bes a c b} } embedded in this line. \stoptext 3) And got dummy image What's wrong? Details are attached. Regards, Vyatcheslav

4 6

Re: [NTG-context] Installation problem (was Updates without rsync)
by richard.stephens＠converteam.com 02 Jun '09

02 Jun '09

>> All I've got to do now is get Scite working again :-( > Why not Emacs :) It's also quite nice for ConTeXt. > > P. I used Emacs when I was young and idealistic, but over the years all those keyboard commands have been beaten out of me and it's beyond me now ;-) I did try it again recently in a flood of nostalgia, but I just couldn't get to grips with it again. Scite is okay, and hitting F7 to build a document is handy. It's missing a few features, though, which would make it great e.g. a user-configurable toolbar, so that we could add toolbar icons for ConTeXt commands (I'm always forgetting the order of options and a button which inserted a \placefigure command with reminders would be fantastic). Anyway, that's a bit off topic. Regards, Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

1 0

beta (2009-06-01): footnote marker not moved
by Peter Rolf 02 Jun '09

02 Jun '09

Hi, this is still not fixed. In mkiv the marker (asterisk) is not moved with it's corresponding footnote text. Best wishes, Peter \def\NoteNumber#1{\hbox to 15pt{\hfill\black #1}} \setupfootnotes [bodyfont=6pt, textcolor=black, before=,after=, rule=off, numberconversion={set 2}, % distance=-2em, margindistance=-2em, numbercommand=\NoteNumber] \def\MyFootnote#1{\footnote{\hskip3em #1}} \starttext \startlocalfootnotes \vbox\bgroup\hsize=78mm\dontcomplain \startitemize[4] \item die Ausgabe erfolgt als PDF/X-4p\MyFootnote{ISO 15930-7:2008} \stopitemize \egroup \stoplocalfootnotes % footnote marker is not moved! \moveright70mm\hbox{\placelocalfootnotes} \stoptext

1 0

Re: [NTG-context] Installation problem (was Updates without rsync)
by richard.stephens＠converteam.com 02 Jun '09

02 Jun '09

> I wanted to get a clean, up-to-date installation of Context on Windows > (without using rsync), so started from scratch as follows: > > 1. Downloaded > http://www.pragma-ade.com/context/install/minimals-snapshot-mswin.zip > 2. Unzipped to C:\Tools\context > 3. Renamed C:\Tools\context\texmf-context to texmf-context-old > 4. Downloaded cont-tmf.zip and unzipped contents to > c:\Tools\context\texmf-context > 3. From command window, ran: > cd \Tools\context > setuptex mktexlsr luatools --generate luatools > --selfupdate mtxrun --selfupdate texexec --make context > --make > 4. To generate new pdf, ran: context testdoc.tex > > Everything seemed to execute without errors until the last step which > returned: > > MtxRun | loading configuration for C:/Tools/context/texmf/web2c from > C:/Tools/context/texmf-cache/luatex- > cache/context/b7bcb6722e1fe509b85ff004c33e8274/trees/90e2367b37b32bcc25e442581c9e72e2 > MtxRun | run 1: luatex > --fmt="C:/Tools/context/texmf-cache/luatex- > cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en" > > --lua="C:/Tools/context/texmf-cache/luatex- > cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en.lua" > "./testdoc.tex" > luatex.exe: > C:/Tools/context/texmf-cache/luatex- > cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en.fmt: > No such file or directory > MtxRun | fatal error, code: 1 > > Looking at the source directory, a file "testdoc.top" has been created but > nothing else. > > Can someone please point me towards a next step? > > Thanks, > > Richard > > P.S. I tried copying cont-en.fmt from > "C:\Tools\context\texmf-mswin\web2c\luatex\pdftex" to the cache directory > but got "Fatal format file error, I'm stymied". I was trying various things and downloaded the beta version of cont-tmf.zip (from http://www.pragma-ade.com/download-2.htm ) instead of the current version and it all works, hooray! Thank-you, everyone, for your help. I'm so pleased to be able to use MKIV now for the first time - it even gives me Helvetica when I ask for it. All I've got to do now is get Scite working again :-( Thanks, Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

2 1

luatex examples - Traversing TeX nodes
by Piotr Kopszak 01 Jun '09

01 Jun '09

Hello, I am trying to compile luatex examples from http://luatex.bluwiki.com . How could I make it work with ConTeXt? The following fails. ----------------------------------------------------------------------------------------------------------------------------------- \directlua0{ local glyph = node.id('glyph') local hlist = node.id('hlist') local vlist = node.id('vlist') function gothru(h,prof) for t in node.traverse(h) do texio.write_nl(string.rep("...",prof) .. 'NODE type=' .. node.type(t.id) .. ' subtype=' .. t.subtype ) if t.id == hlist or t.id == vlist then texio.write(' w=' .. t.width .. ' h=' .. t.height .. ' d=' .. t.depth .. ' s=' .. t.shift ) gothru(t.list,prof+1) end if t.id == glyph then texio.write(' font=' .. t.font .. ' char=' .. t.char .. ' width=' font.fonts[t.font].characters[t.char]['width']) end end end callback.register('pre_linebreak_filter', function(h) gothru(h,0) return true end ) } \starttext bla bla bla bla \stoptext ------------------------------------------------------------------------------------------------------- best Piotr -- http://okle.pl

2 2

MkIV italic correction?
by Corsair 01 Jun '09

01 Jun '09

Hi all, Does MkIV support italic correction? Because the following code produces two identical "f)"s \starttext {\it f}) {\it f\/}) \stoptext -- There is no emotion; there is peace. There is no ignorance; there is knowledge. There is no passion; there is serenity. There is no death; there is the Force.

9 21

Landscape printing
by Roger Mason 01 Jun '09

01 Jun '09

Hello, I made a document that needs to be printed in landscape orientation on letter paper. I have this in the document: \setuppapersize[letter,landscape][letter,landscape] It looks fine in xpdf, but when I print the page has a very wide left margin and the last column of my table is off the right edge of the page. I'm using this print command: lpr -Plj5l -o landscape <filename> I also tried printing from within xpdf, with the same command and the same result. Thanks for any help. Roger

1 0

Re: [NTG-context] Installation problem (was Updates without rsync)
by richard.stephens＠converteam.com 01 Jun '09

01 Jun '09

> On Mon, Jun 1, 2009 at 10:56, <richard.stephens(a)converteam.com> wrote: > > > > Hello everyone, > > > > I wanted to get a clean, up-to-date installation of Context on Windows > > (without using rsync), so started from scratch as follows: > > > > 1. Downloaded > > http://www.pragma-ade.com/context/install/minimals-snapshot-mswin.zip > > 2. Unzipped to C:\Tools\context > > 3. Renamed C:\Tools\context\texmf-context to texmf-context-old > > 4. Downloaded cont-tmf.zip and unzipped contents to > > c:\Tools\context\texmf-context > > 3. From command window, ran: > > cd \Tools\context > > setuptex mktexlsr luatools --generate luatools > > --selfupdate mtxrun --selfupdate texexec --make context > > --make > > 4. To generate new pdf, ran: context testdoc.tex > > > > Everything seemed to execute without errors until the last step which > > returned: > > Can you try to run "luatools --generate" once more after "context --make"? > > Mojca I tried that - same problem. > Do you downloaded the current or the beta version, the current is > > http://pragma-ade.nl/download-1.htm > > and the beta is > > http://pragma-ade.nl/download-2.htm > > Wolfgang The current version (2008.10.31 13:58 according to "context --version") Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

1 0

Installation problem (was Updates without rsync)
by richard.stephens＠converteam.com 01 Jun '09

01 Jun '09

Hello everyone, I wanted to get a clean, up-to-date installation of Context on Windows (without using rsync), so started from scratch as follows: 1. Downloaded http://www.pragma-ade.com/context/install/minimals-snapshot-mswin.zip 2. Unzipped to C:\Tools\context 3. Renamed C:\Tools\context\texmf-context to texmf-context-old 4. Downloaded cont-tmf.zip and unzipped contents to c:\Tools\context\texmf-context 3. From command window, ran: cd \Tools\context setuptex mktexlsr luatools --generate luatools --selfupdate mtxrun --selfupdate texexec --make context --make 4. To generate new pdf, ran: context testdoc.tex Everything seemed to execute without errors until the last step which returned: MtxRun | loading configuration for C:/Tools/context/texmf/web2c from C:/Tools/context/texmf-cache/luatex-cache/context/b7bcb6722e1fe509b85ff004c33e8274/trees/90e2367b37b32bcc25e442581c9e72e2 MtxRun | run 1: luatex --fmt="C:/Tools/context/texmf-cache/luatex-cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en" --lua="C:/Tools/context/texmf-cache/luatex-cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en.lua" "./testdoc.tex" luatex.exe: C:/Tools/context/texmf-cache/luatex-cache/context/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en.fmt: No such file or directory MtxRun | fatal error, code: 1 Looking at the source directory, a file "testdoc.top" has been created but nothing else. Can someone please point me towards a next step? Thanks, Richard P.S. I tried copying cont-en.fmt from "C:\Tools\context\texmf-mswin\web2c\luatex\pdftex" to the cache directory but got "Fatal format file error, I'm stymied". Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

3 2

Is this an encoding problem?
by Maurício 01 Jun '09

01 Jun '09

Hi, I'm using the lines below in the start of a book '.tex' file. It selects the 'gentium' pre-defined typeface, and the file itself was done using utf8. However, a few unicode characters desapear or cause small problems, like these (unicodes between 2012 and 2015): ― (before spoken text) - (hyphen) I thought they could be missing from the font, but I have already used gentium by just loading the font, before I learned about typefaces. (I did download the font from its site, however, instead of using that from minimals.) Did I do anything wrong? Thanks, Maurício %%%% \enableregime[utf] \mainlanguage[pt] \setuppapersize[a5][a5] \usetypescript[gentium] \setupbodyfont[gentium,20pt] \setupindenting[small] \indenting[yes] \setupwhitespace[small] \definestartstop [verse] [before=\vbox\bgroup\startlines, after=\stoplines\egroup] \defineselector[title][max=2,n=2] \setuplist[chapter][width=0pt] \setupheads[alternative=middle] \setuphead[chapter][number=no,incrementnumber=list] \starttext

2 2

Error with \placefootnotes
by Khaled Hosny 31 May '09

31 May '09

With the following sample and MkIV \starttext \setupfootnotes[location=text] This\footnote{Or that, if you prefer.} is a sentence with a footnote. \placefootnotes \stoptext I get: ! Undefined control sequence. \doplacenotes ... \endgroup \the \everysetupnotes <to be read again> \fi <to be read again> \stoptext l.5 \stoptext I think \everysetupnotes in strc-not.tex, line 913 should be \everysetupnote, but after fixing it the output isn't correct, any ideas? Regards, Khaled -- Khaled Hosny Arabic localiser and member of Arabeyes.org team Free font developer

1 1

References not working
by Khaled Hosny 31 May '09

31 May '09

See the following example, I get unknown references in the log and question marks in the output. I'm working on a project that I should finnish soon, so if fixing this will take some time, please let me know. \starttext \chapter[1]{One} \in[2]: \about[2] \chapter[2]{Two} \in[1]: \about[1]. \stoptext Regards, Khaled -- Khaled Hosny Arabic localiser and member of Arabeyes.org team Free font developer

1 0

updates without rsync
by richard.stephens＠converteam.com 30 May '09

30 May '09

Gentlemen and Ladies, I am using ConTeXt on a company Windows PC behind two firewalls with no possibility of accessing or changing the firewalls. I've tried to update using the minimals installation and rsync, but nothing gets through. What is the recommended method of updating to the latest ConTeXt when rsync is not an option? The last time I tried, I downloaded cont-tmf.zip from http://www.pragma-ade.com/download-1.htm and unzipped the contents to overwrite everything in texmf-local. Is this still the best way? Thanks. Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

6 8

Indent after formula in enumeration
by Xan 30 May '09

30 May '09

Hi, I have \setupformulae[indentnext=auto] but when I put a \startformula \stopformula in demo environment it does not indent. Why? What can I do for getting that? My environment is: \defineenumeration[demo][text={Demostració.\space}, number=no,location=serried,width=fit,headstyle=italic, indentnext=yes,between=\blank,textdistance=.5em,closesymbol={\mathematics{\Box}},style=normal] Thanks a lot, Xan.

2 3

Theorems with arguments like amsthm
by Xan 30 May '09

30 May '09

Hi, I have my environment of context that defines the theorems and lemmas like amsthm in latex. For example, for lemmas, I have: \defineenumeration [lemma] [text={Lemma},headstyle=bold,between=\blank,titledistance=0em,textdistance=1em, stopper={.\space},location=serried,left={\bgroup\bf},right={\egroup},width=fit,style=italic] The question is how can I get the typical argument of lemmas: "Lema 4.1 (superadditive lemma)"? How can I add the possibility that lemma _could_ have one argument (the phrase in parentesis)?. I'm not a TeX programmer, such a ConTeXt user. Any hint? Thanks, Xan.

3 9

latest beta problem (minimals)
by Bowen Alan C. 30 May '09

30 May '09

The installation process is interrupted by report I can't find file `core-dat.tex'. Alan

2 2

Bug in module units
by Willi Egger 29 May '09

29 May '09

Hi, There is most probably a bug related to the module units. Only the last argument is typeset: \usemodule[units] \starttext \Centi \Meter \Centi \Liter \Milli \Meter \Square \Kilo \Meter \stoptext Kind regards Willi

2 3

Latest beta and MKII problem
by Bowen Alan C. 29 May '09

29 May '09

The latest beta (ConTeXt ver: 2009.05.28 14:36 MKII fmt: 2009.5.28 int: english/english) no longer processes my files: all I get is complaints about an extra \else. That is, \definehead[LevelCHead][chapter] \setuphead[LevelCHead][style={\tf \it},alternative=text,number=no,page=no] \starttext Hello world! \LevelCHead{Hello world!} Donec placerat. Nullam nibh dolor, blandit sed, fermentum id, imperdiet sit amet, neque. Nam mollis ultrices justo. Sed tempor. \stoptext gets ! Extra \else. \doplaceheadtext ...er #2}\makestrutofbox 0 \else \setbox 0= \ifvertical \vbo... \dodododoconstructhead ...{\finalsectionnumber }}} \writesection {#1} {-}{#4}\... l.9 \LevelCHead{Hello world!} Donec placerat. Nullam nibh dolor, blandit sed... ? Alan

2 2

Re: [NTG-context] updates without rsync
by richard.stephens＠converteam.com 29 May '09

29 May '09

Lutz Haseloff <lutz.haseloff(a)googlemail.com> wrote on 29/05/2009 11:04:55: > Hi Richard, > > 1. Install Ruby > > right > > > 2. Install Perl > > I think, Perl is not needed anymore. > > Download http://www.pragma-ade.com/context/install/minimals-snapshot-mswin.zip > > I unzip it in c:\, you get c:\context\texmf-context and some more directories > > > 3. Download cont-tmf.zip and unzip contents to <installdir> > > make c:\context\texmf-context empty and unzip cont-tmf.zip into it > > > 4. Set environment variables: > OSFONTDIR = C:\WINDOWS\Fonts > TEXMF = <installdir>\scripts\context\stubs\mswin > TEXMFCACHE = C:\TEMP > TEXMFCNF = <installdir>\web2c > TEXMFOS = ?????? > others ???? > > no, go to c:\context an run setuptex.bat > > I have an icon on my desktop with: > C:\WINDOWS\system32\cmd.exe /K cd c:\context && .\setuptex.bat > > > 5. From command window, run installation scripts: > mktexlsr > luatools --generate > luatools --selfupdate > mtxrun --selfupdate > texexec --make (for mkii) > context --make (for mkiv) > > open a terminal window > c: enter > cd context enter > setuptex enter > > the above commands should now work without errors > > 6. To generate new pdf run: > context --pdf myfile.tex > > You have to run setuptex.bat in c:\context before you can compile texfiles > > I automated this for the terminal and for the Scite Editor. > > > 7. Anything else I've missed ???? > That should do it > > For updating luatex, download ftp://akagi.ms.u-tokyo.ac. > jp/pub/TeX/win32/luatex-dev-w32.tar.bz2 > and unzip the files in bin into c:\context\texmf-mswin\bin. > After that run context --make > > > You're welcome > > Greetings Lutz Thank-you very much for the above. Still a few problems though! I have installed it to C:\tools\context. Everything goes well until 'mktexlsr' which returns: Cannot open C:/tools/context/texmf-project/ls-R to write. Cannot open C:/tools/context/texmf-fonts/ls-R to write. Cannot open C:/tools/context/texmf-extra/ls-R to write. because the folders do not exist. So I've created empty folders just in case and no more warnings! Then all goes well until 'context --pdf myfile.tex' which returns: luatex.exe: c:/tools/context/texmf-cache/tuatex-cache/b7bcb6722e1fe509b85ff004c33e8274/formats/cont-en.fmt: No such file or directory MtxRun | fatal error, code 1 and 'texexec --pdf myfile.tex' returns: c:\tools\context\texmf-mswin\bin\mtxrun.lua:8603: attempt to concatenate a nil value Any ideas? Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

2 1

Re: [NTG-context] updates without rsync
by richard.stephens＠converteam.com 29 May '09

29 May '09

> On Thu, May 28, 2009 at 10:23, <richard.stephens(a)converteam.com> wrote: > > > > I am using ConTeXt on a company Windows PC behind two firewalls with no > > possibility of accessing or changing the firewalls. I've tried to update > > using the minimals installation and rsync, but nothing gets through. What > > is the recommended method of updating to the latest ConTeXt when rsync is > > not an option? > > > > The last time I tried, I downloaded cont-tmf.zip from > > http://www.pragma-ade.com/download-1.htm and unzipped the contents to > > overwrite everything in texmf-local. Is this still the best way? I've got myself in a terrible mess now! I downloaded cont-tmf.zip and unzipped the contents, then tried to follow Hans' instructions, i.e.: > mktexlsr > luatools --generate > luatools --selfupdate > mtxrun --selfupdate > texexec --make (for mkii) > context --make (for mkiv) Unfortunately, none of these commands runs without errors! SO, I decided to reinstall from scratch. That's where my problems really started! I searched around the Wiki and found lots of pages on installation, but none of them seem quite right. I looked at http://www.pragma-ade.com/general/manuals/minstall.pdf but it looks old and does not seem to relate to the stuff I've downloaded. >From various places, I think I need to do the following, but some details are missing: 1. Install Ruby 2. Install Perl 3. Download cont-tmf.zip and unzip contents to <installdir> 4. Set environment variables: OSFONTDIR = C:\WINDOWS\Fonts TEXMF = <installdir>\scripts\context\stubs\mswin TEXMFCACHE = C:\TEMP TEXMFCNF = <installdir>\web2c TEXMFOS = ?????? others ???? 5. From command window, run installation scripts: mktexlsr luatools --generate luatools --selfupdate mtxrun --selfupdate texexec --make (for mkii) context --make (for mkiv) 6. To generate new pdf run: context --pdf myfile.tex 7. Anything else I've missed ???? Thanks to all, Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. Please consider the environment before printing this e-mail

2 1

LilyPond module 2009-05-27
by Henning Hraban Ramm 29 May '09

29 May '09

I'm a bit proud to announce the latest version of the LilyPond bridge module. Download: http://modules.contextgarden.net/t-lilypond Documentation: http://wiki.contextgarden.net/LilyPond and, of course: http://lilypond.org/doc/v2.12/Documentation/ Changes: - Code cleanup (partly by Wolfgang) - Works with LuaTeX (ConTeXt MkIV) *only*! Also dropped support for EPS inclusion. - Uses subdirectories for temporary and created files to keep your working directory clean The included PDF is still the old one, because ConTeXt's processing of modules is broken. It makes no big sense anyway. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 2

MarkIV, typescripts, Delicious (was: define font | font with name Delicious-Roman is not found)
by Nicolas Girard 28 May '09

28 May '09

2009/5/28 Nicolas Girard <nicolas.girard(a)nerim.net>: > 2009/5/28 Wolfgang Schuster <schuster.wolfgang(a)googlemail.com>: >> >>> >>> \starttext >>> \font\Myfont=Delicious-Roman at 24pt >>> \Myfont Hello, world >>> \stoptext >> Now, I'm trying to make the typescript code from the wiki [1] work [1] http://wiki.contextgarden.net/exljbris_typescript My test file is as follows: % ========================== \definefontfeature[default][liga=yes,kern=yes,tlig=yes,trep=yes,script=latn,mapping=tex-text] \starttypescript [sans] [delicious] \setups[font:fallback:sans] \definefontsynonym [Sans] [Delicious-Regular] \definefontsynonym [SansItalic] [Delicious-Italic] \definefontsynonym [SansBold] [Delicious-Bold] \definefontsynonym [SansBoldItalic] [Delicious-BoldItalic] \definefontsynonym [SansCaps] [Delicious-Caps] \stoptypescript \starttypescript [sans] [delicious] \definefontsynonym [Delicious-Regular] [name:Delicious-Roman] [features=default] \definefontsynonym [Delicious-Italic] [name:Delicious-Italic] [features=default] \definefontsynonym [Delicious-Bold] [name:Delicious-Bold] [features=default] \definefontsynonym [Delicious-BoldItalic] [name:Delicious-BoldItalic] [features=default] \definefontsynonym [Delicious-Caps] [name:Delicious-SmallCaps] [features=default] \stoptypescript \starttypescript [delicious] \definetypeface [delicious] [ss] [sans] [delicious] [default] \stoptypescript \setupbodyfont[delicious,ss,10pt] \starttext Goodbye --- cruel -- world fi ff ffi \italic{Italic} Roman \stoptext % ========================== But the fonts fall silently back to lmodern. Am I missing something ? Sorry, this may sound like dumb questions, but I just don't get it :-/ -- Nicolas

2 2

Re: [NTG-context] No em/en dashes (was: define font | font with name Delicious-Roman is not found)
by Nicolas Girard 28 May '09

28 May '09

2009/5/28 Wolfgang Schuster <schuster.wolfgang(a)googlemail.com>: > Hi Wolfgang, thanks for such a fast answer ! > Am 28.05.2009 um 17:59 schrieb Nicolas Girard: > >> >> \starttext >> \font\Myfont=Delicious-Roman at 24pt >> \Myfont Hello, world >> \stoptext > > > Please don't use \font, use ConTeXt's \definefont instead: > OK, but why ? Reading the list, I see that you were still using it six months ago ; is is deprecated now ? > \definefont[Myfont][name:Delicious-Roman][features=default] This indeed let me get the font. But then, I can't get any en/em dashes when typing -- / ---. I have: $ mtxrun --script fonts --list --info --pattern="delicious*roman" MTXrun | fontname: deliciousroman MTXrun | fullname: Delicious-Roman MTXrun | filename: /usr/local/share/fonts/d/delicious_roman.otf MTXrun | MTXrun | gpos features: MTXrun | MTXrun | feature script languages MTXrun | MTXrun | kern latn dflt MTXrun | MTXrun | gsub features: MTXrun | MTXrun | feature script languages MTXrun | MTXrun | tlig all all MTXrun | trep all all but none of the following tests did succeed: %===== \starttext \definefont[Myfont][name:Delicious-Roman][features=default] \Myfont Goodbye --- cruel -- world \stoptext %===== \starttext \definefontfeature[default][mapping=tex-text] \definefont[Myfont][name:Delicious-Roman][features=default] \Myfont Goodbye --- cruel -- world \stoptext %===== \starttext \definefontfeature[default][tlig=yes,mapping=tex-text] \definefont[Myfont][name:Delicious-Roman][features=default] \Myfont Goodbye --- cruel -- world \stoptext %===== \starttext \definefontfeature[default][tlig=yes,script=latn,mapping=tex-text] \definefont[Myfont][name:Delicious-Roman][features=default] \Myfont Goodbye --- cruel -- world \stoptext Any thoughts ? -- Nicolas

2 2

define font | font with name Delicious-Roman is not found
by Nicolas Girard 28 May '09

28 May '09

Hi all, I'm using the latest beta of context minimals, rsynced over a TeXlive 2008 on ubuntu. LuaTeX is Version beta-0.40.1-2009050920 (Web2C 7.5.7) MTXrun is TDS Runner Tool 1.22 ConTeXt is 2009.05.28 14:36 $ mtxrun --script fonts --list|grep Delicious gives: deliciousbold Delicious-Bold /usr/local/share/fonts/d/delicious_bold.otf deliciousbolditalic Delicious-BoldItalic /usr/local/share/fonts/d/delicious_bolditalic.otf deliciousheavy Delicious-Heavy /usr/local/share/fonts/d/delicious_heavy.otf deliciousitalic Delicious-Italic /usr/local/share/fonts/d/delicious_italic.otf deliciousroman Delicious-Roman /usr/local/share/fonts/d/delicious_roman.otf delicioussmallcaps Delicious-SmallCaps /usr/local/share/fonts/d/delicious_smallcaps.otf while env|grep ^OS gives OSFONTDIR=/usr/local/share/fonts Running the following file is okay: \starttext \font\Myfont=/usr/local/share/fonts/d/delicious_roman.otf at 24pt \Myfont Hello, world \stoptext but running \starttext \font\Myfont=Delicious-Roman at 24pt \Myfont Hello, world \stoptext leads to define font | font with name Delicious-Roman is not found define font | unknown font Delicious-Roman, loading aborted ! Font \Myfont=Delicious-Roman at 24pt not loadable: metric data not found or bad. What's going wrong ? Thanks very much in advance ! -- Nicolas

2 1

KR itemize fails with latest beta
by Matthijs Kooijman 28 May '09

28 May '09

Hi, I've downloaded the beta today, which fails on one of my itemizes using the KR numbering scheme. I'm using MkIV context, with the following file: \starttext \startitemize[KR] \item Foo \stopitemize \stoptext When compiling this file, I get the below errors. When using R instead of KR, everything works. When using MkII (i.e., running texexec Test.tex, which means running MkII, right?) things work as well. matthijs@katherina:~/docs/UT/FHDL/progress$ texexec --lua Test.tex TeXExec | processing document 'Test.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file Test.top TeXExec | using randomseed 750 TeXExec | tex engine: luatex TeXExec | tex format: cont-en LuaTools | running command: luatex --fmt="/home/matthijs/luatex-cache/context/6300afb4995fe38c77e9b86ed1ef1028/formats/cont-en" --lua="/home/matthijs/luatex-cache/context/6300afb4995fe38c77e9b86ed1ef1028/formats/cont-en.luc" "Test.tex" This is LuaTeX, Version beta-0.40.0-2009042718 (Web2C 7.5.7) \write18 enabled. (Test.tex color : mpcmyk color space is supported color : mpspot color space is supported color : system rgb is global activated ConTeXt ver: 2009.05.20 00:02 MKIV fmt: 2009.5.20 int: english/english system : cont-new loaded (/usr/share/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex (/usr/share/texmf/tex/context/base/cont-new.mkiv) (/usr/share/texmf/tex/context/base/cont-mtx.tex)) system : cont-fil loaded (/usr/share/texmf/tex/context/base/cont-fil.tex loading : ConTeXt File Synonyms ) system : cont-sys.rme loaded (/etc/texmf/tex/context/user/cont-sys.rme (/usr/share/texmf/tex/context/base/type-tmf.tex) (/usr/share/texmf/tex/context/base/type-siz.tex (/usr/share/texmf/tex/context/base/type-siz.mkiv)) (/usr/share/texmf/tex/context/base/type-otf.tex (/usr/share/texmf/tex/context/base/type-otf.mkiv))) system : Test.top loaded (Test.top) fonts : preloading latin modern fonts bodyfont : 12pt rm is loaded language : language en is active systems : begin file Test at line 1 ! Missing } inserted. <inserted text> } <to be read again> \endgroup <to be read again> \fi \doactualitemnumber ...rrentitemgroupcounter ]\fi \dohandleitemreference \en... \actualitemnumber ...fi \else \doactualitemnumber \fi \listitem ...@@localitemsymbol \currentitemlevel } \getitemparameter \current... ... l.3 \item F oo ? Any clue on what's wrong here?

2 2

beta
by Hans Hagen 28 May '09

28 May '09

i uploaded a bet awidt a couple of structure fixes -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Beta version 2009.05.27 16:26, \footnote and \section
by Otared Kavian 28 May '09

28 May '09

Hi Hans, The issue I reported some time ago regarding \scetion and \footnote with mkiv, is still there: mkiv, LuaTeX version 40, LuaTeX revision 1, (LuaTeX date stamp 2009050813), ConTeXt version 2009.05.27 16:26. The issue is as follows: the text of the \footnote used in the title of a \section does not show up at the bottom of the page: here is a minimal test: %%% begin example \starttext \section{Testing a section\footnote{Actually for testing footnotes in the title of a section\dots}} % This footnote does not show up \startitemize \item test\footnote{This is a silly remark\dots} \item test\footnote{This is a silly remark, inside an item\dots} \stopitemize test\footnote{This is another silly remark but outside items\dots} \stoptext %%%% end example Best regards: OK

2 2

Re: [NTG-context] define an incremental personal bullet of item
by Dalyoung 28 May '09

28 May '09

Thank you for the checking. I typed the text and run it. At this time, it worked. There may be a garbage attached during the process of "copy and paste". By the way, is it possible to modify this code to use circled character a, b, c, ...? By using the command \sym{symbol}, I may use them, but is there a automatic way of doing that? Thank you again. Best regards, Dalyoug

1 0

Page number in the middle of the margin
by Flavien Lambert 27 May '09

27 May '09

Dear all, as said by the title of the e-mail, I try to put the page number in the middle (both vertically and horizontally) of the margin. I tried a custom command like \def\mypagenumber#1{% \vfill #1 \vfill } \setuppagenumbering{location=margin,command=\mypagenumber} but, unfortunately, I got an error message on the \vfill. Is there a direct way to place my page number ? Regards, -- Flavien. ---------------------------- "Quantum objects are completely crazy but, at least, they are all crazy in the same way." R.P. Feynman.

3 4

beta
by Hans Hagen 27 May '09

27 May '09

Hi, I uploaded a beta. Not that many fixes (if someone can collect structure related bugs ...), only a few. For those who keep an eye on the source ... i'm rewriting ppchtex and it will be integral part of the core of mkiv (so that we have chemistry on board). It's not yet finished but i'm getting there. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

6 14

Interaction not working?
by Khaled Hosny 27 May '09

27 May '09

Here is a minimal example: \setupinteraction[state=start] \setupcolors [state=start] \useURL[wiki][http://wiki.contextgarden.net][][\ConTeXt\ wiki] \starttext \from[wiki] \stoptext Which typesets something like the expanded text of \ConTeXt macro instead of the expected hyperlink. Regards, Khaled -- Khaled Hosny Arabic localiser and member of Arabeyes.org team Free font developer

2 1

bug in content interaction
by Lutz Haseloff 27 May '09

27 May '09

Hi all, with the newest ConTeXt (2009.05.27 11:27 MKIV) and luatex (beta-0.41.0-2009052623) I get a strange effect. If i use \placecontent all is as expected, but if I use \completecontent the click on chapter 3 in the table of content jumps to chapter 2 in the pdf. 2 jumps to 1. A click on chapter 1 has no effect. My file: \setupinteraction[state=start] \mainlanguage[de] \starttext \completecontent %\placecontent \chapter{Die Häuslichkeit} Mein Vater war ein Kaufmann. Er bewohnte einen Teil des ersten Stockwerkes eines mäßig großen Hauses in der Stadt, in welchem er zur Miete war… \chapter{Der Wanderer} Ich verfuhr mit der Rente, welche mir der Vater ausgesetzt hatte, gut. Daher wurde nach einiger Zeit mein Kreis erweitert, wie es der Vater versprochen hatte… \chapter{Die Einkehr} Eines Tages ging ich von dem Hochgebirge gegen das Hügelland hinaus. Ich wollte nehmlich von einem Gebirgszuge in einen andern übersiedeln und meinen Weg dahin durch einen Teil des offenen Landes nehmen… \stoptext Greetings Lutz

2 1

bug in MarkIV ? section numbering
by Amaël Broustet 27 May '09

27 May '09

Dear all, the following example : ... \chapter{Blabla} \subsection{bla} ... is numbered 1 Blabla 11 bla The problem appears only if I "skip" the \section step. In fact \chapter{Blabla} \section{Bla} \subsection{bla} gives 1 Blabla 1.1 Bla 1.1.1 bla Is the first example the expected behavior ? I would better have think to something like 1 Blabla 1.0.1 bla Best, Amaël

3 4

subsection numbering
by Amaël Broustet 27 May '09

27 May '09

Dear all, I got a problem with the numbering of subsections : they are numbered using the \currentheadnumber of the heading containing the \subsection attached an example and the output. in the log, I get : structure : chapter @ level 2 : 0.1 -> Chapter structure : section @ level 3 : 0.1.1 -> Section structure : subsection @ level 4 : 0.1.1.1 -> Subsection structure : subsection @ level 4 : 0.1.1.2 -> Subsection [2.2] structure : chapter @ level 2 : 0.2 -> Chapter structure : subsection @ level 4 : 0.2.0.1 -> Subection structure : subsection @ level 4 : 0.2.0.2 -> Subsection [3.3] best, Amaël

2 2