- ntg-context - NTG Mailing Lists

Splitting natural tables
by Christian 30 Nov '11

30 Nov '11

Hello, is it still not possible to split a table so that it covers one half page an then another half page? It is my understanding that splitting moves the table to the next page and then splits it to the following if it gets too long for one entire page. Would a "manual split" be possible? Examle (table is not split, but could be): \starttext \dorecurse{2}{\input knuth } \startplacetable[title={My Table}] \bTABLE[option=stretch,split=repeat] \bTABLEhead \bTR \bTH C1 \eTH \bTH C2 \eTH \eTR \eTABLEhead \bTABLEbody \dorecurse{20}{\bTR \bTD text \eTD \bTD text \eTD \eTR} \eTABLEbody \eTABLE \stopplacetable \input knuth \stoptext

3 10

Math in metapost
by Hans van der Meer 30 Nov '11

30 Nov '11

I would like to put some math in metapost pictures. For the moment I am using textext for the typesetting in my metapost macro: pic := textext("\setbox0=\hbox{\color["&textcolor&"]"&labeltext&"}\dp0=0pt\box0"); picture pic will be placed in the metapost figure. Simple math like $p=2$ works fine, but the system chokes on something like the following matrix: $\pmatrix{p_{0|0}\cr}$ (it does fine in ConTeXt itself). The error is: ! Only one # is allowed per tab. system > tex > error on line 6 in file Info/kanaalmatrix.tex: Only one # is allowed per tab ... Perhaps I am too optimistic about textext's possibilities. But how can I accomplish the placement of these and more elaborate formulae in metapost pictures using ConTeXt? It is of the essence for a series of Powerpoint slides I am preparing, wheein these formulae must be placed as individual pictures. Hans van der Meer

3 2

Export to epub
by Keith McKay 30 Nov '11

30 Nov '11

Hi I've been playing about with Export in Context with a view to producing ePubs. When I run the script: /mtxrun --script epub --make test.specification /the test.tree is prepared but no epub file. The output shown below has a couple or 'error' messages which are probably due to the way my text editor is set up (Scite Version 2.02). If anyone is using Scite and producing ePubs I be grateful for some hints on how to set this up so that inkscape and zip works. %%Script Output mtx-epub | creating paths in tree test.tree mtx-epub | copying toc.ncx to test.tree/OPS/toc.ncx mtx-epub | copying test-styles.css to test.tree/OPS/test-styles.css mtx-epub | copying test-images.css to test.tree/OPS/test-images.css mtx-epub | copying test.css to test.tree/OPS/test.css mtx-epub | copying test.xhtml to test.tree/OPS/test.xhtml mtx-epub | running command 'inkscape --export-plain-svg=cow.svg cow.pdf' 'inkscape' is not recognized as an internal or external command, operable program or batch file. mtx-epub | copying cow.svg to test.tree/OPS/cow.svg mtx-epub | copying hacker.jpg to test.tree/OPS/hacker.jpg mtx-epub | copying mill.png to test.tree/OPS/mill.png mtx-epub | creating archive 'zip' is not recognized as an internal or external command, operable program or batch file. 'zip' is not recognized as an internal or external command, operable program or batch file. 'zip' is not recognized as an internal or external command, operable program or batch file. mtx-epub | epub archive: test.tree/test.epub>Exit code: 0 %%End Script Output I'm using Minimals ConTeXt ver: 2011.09.27 20:05 MKIV fmt: 2011.11.19 int: english/english on a Windows 7 machine and the test.tex file is the |export-example.tex file renamed from the Minimals distribution|. Thanks Keith McKay

2 5

page number in margin
by Henning Hraban Ramm 30 Nov '11

30 Nov '11

Hi again, I’d like to get my page numbers in the margin. This works: \setuppagenumbering[alternative=doublesided,location=margin] But that way it’s on the bottom of the footer margin; I'd like it on the top. Second variant: Even better, I’d like my page number at the bottom of the text margin. How can I achieve that? location option "marginedge" doesn’t seem to do anything, as far as i can tell, and "inright" is the same as "margin". Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 2

Re: [NTG-context] Error while compiling : ! String contains an invalid utf-8 sequence.
by S Barmeier 30 Nov '11

30 Nov '11

On 11/27/2011 11:44 PM, ntg-context-request(a)ntg.nl wrote: > Send ntg-context mailing list submissions to > ntg-context(a)ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request(a)ntg.nl > > You can reach the person managing the list at > ntg-context-owner(a)ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. error with \showlayout and export (Henning Hraban Ramm) > 2. Re: error with \showlayout and export (Wolfgang Schuster) > 3. page number in margin (Henning Hraban Ramm) > 4. Export to epub (Keith McKay) > 5. Re: Error while compiling : ! String contains an invalid > utf-8 sequence. (Mojca Miklavec) > 6. Re: Export to epub (Hans Hagen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 27 Nov 2011 12:11:36 +0100 > From: Henning Hraban Ramm <hraban(a)fiee.net> > To: mailing ConTeXt users list for <ntg-context(a)ntg.nl> > Subject: [NTG-context] error with \showlayout and export > Message-ID: <4670B7FC-970F-4698-B676-9F8C31AE8971(a)fiee.net> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > Hi wizards, > > if I use \showlayout in a project where I setup export=yes, ConTeXt > stops with a fatal error. > > Minimal failing example: > > \setupbackend[export=yes] > \starttext > \showlayout > \stoptext > > > Ixchel:konzept hraban$ context --purge context_test.tex > > mtx-context | run 1: luatex --fmt="/Users/hraban/Library/texmf/tex/ > texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/ > formats/cont-en" --lua="/Users/hraban/Library/texmf/tex/texmf-cache/ > luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont- > en.lui" --backend="pdf" "./context_test.tex" \stoptext > This is LuaTeX, Version beta-0.70.1-2011051908 (rev 4277) > \write18 enabled. > (context_test.tex > > ConTeXt ver: 2011.11.24 15:52 MKIV fmt: 2011.11.25 int: english/ > english > > system > cont-new.mkiv loaded > (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/cont- > new.mkiv > system > beware: some patches loaded from cont-new.mkiv > ) > system > context_test.top loaded > (context_test.top) > fonts > latin modern fonts are not preloaded > languages > language en is active > backend > export > enabling export to xml > {/Users/hraban/Library/texmf/tex/texmf-context/fonts/map/pdftex/ > context/mkiv-base.map} > fonts > preloading latin modern fonts (second stage) > (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/type- > siz.mkiv) (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/ > base/type-otf.mkiv) > files > readfile > asked name: 'loc', not found > {/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/lm/lm- > math.map}{/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/ > lm/lm-rm.map} > fonts > virtual math > unable to resolve name mapsfromchar > fonts > fallback modern rm 12pt is loaded > (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/page- > run.mkiv > loading > ConTeXt Page Macros / Runtime Macros > ) > interface > initialization > loading interface definitions from > 'mult-def.lua' > interface > initialization > loading interface messages from > 'mult-mes.lua' > metapost > initializing instance 'metafun' using format 'metafun' > metapost > loading 'metafun': /Users/hraban/Library/texmf/tex/ > texmf-context/metapost/context/base/metafun.mpiv > backend > xmp > using file '/Users/hraban/Library/texmf/tex/ > texmf-context/tex/context/base/lpdf-pdx.xml' > pages > flushing realpage 1, userpage 1, subpage 1 > pages > flushing realpage 2, userpage 2 > pages > flushing realpage 3, userpage 3 > pages > flushing realpage 4, userpage 4 > pages > flushing realpage 5, userpage 5 > )</Users/hraban/Library/texmf/tex/texmf/fonts/opentype/public/lm/ > lmmono10-regular.otf></Users/hraban/Library/texmf/tex/texmf/fonts/ > opentype/public/lm/lmmono12-regular.otf></Users/hraban/Library/texmf/ > tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf> > ! LuaTeX error ...exmf/tex/texmf-context/tex/context/base/back-exp.lua: > 1203: attempt to index global 'c' (a nil value). > > system > tex > error on line 0 in file : LuaTeX error ... > > <empty file> > > <*> ./context_test.tex > \stoptext > ? > > > > Greetlings from Lake Constance! > Hraban > --- > http://www.fiee.net/texnique/ > http://wiki.contextgarden.net > https://www.cacert.org (I'm an assurer) > > > > ------------------------------ > > Message: 2 > Date: Sun, 27 Nov 2011 12:35:10 +0100 > From: Wolfgang Schuster <schuster.wolfgang(a)googlemail.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Cc: Henning Hraban Ramm <hraban(a)fiee.net> > Subject: Re: [NTG-context] error with \showlayout and export > Message-ID: <0BCE3119-7D79-43B9-A159-62BC079800B1(a)googlemail.com> > Content-Type: text/plain; charset=us-ascii > > > Am 27.11.2011 um 12:11 schrieb Henning Hraban Ramm: > >> Hi wizards, >> >> if I use \showlayout in a project where I setup export=yes, ConTeXt stops with a fatal error. >> >> Minimal failing example: >> >> \setupbackend[export=yes] >> \starttext >> \showlayout >> \stoptext > > I think this change in back-exp.lua should work (runs at least without an error message): > > function extras.tabulate(result,element,detail,n,fulltag,di) > local data = di.data > for i=1,#data do > local di = data[i] > if di.tg == "tabulaterow" then > local did = di.data > local content = false > for i=1,#did do > local d = did[i].data > -- local c = d and c.content > local c = d and d.content > if c and #c > 0 then > content = true > break > end > end > if not content then > di.element = "" -- or simply remove > end > end > end > end > > Wolfgang > > ------------------------------ > > Message: 3 > Date: Sun, 27 Nov 2011 13:40:51 +0100 > From: Henning Hraban Ramm <hraban(a)fiee.net> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: [NTG-context] page number in margin > Message-ID: <90A69805-BCEC-4A6C-BC89-5FA243C9C802(a)fiee.net> > Content-Type: text/plain; charset=WINDOWS-1252; format=flowed; > delsp=yes > > Hi again, > > I?d like to get my page numbers in the margin. > This works: > \setuppagenumbering[alternative=doublesided,location=margin] > > But that way it?s on the bottom of the footer margin; I'd like it on > the top. > > Second variant: Even better, I?d like my page number at the bottom of > the text margin. How can I achieve that? > > location option "marginedge" doesn?t seem to do anything, as far as i > can tell, and "inright" is the same as "margin". > > Greetlings from Lake Constance! > Hraban > --- > http://www.fiee.net/texnique/ > http://wiki.contextgarden.net > https://www.cacert.org (I'm an assurer) > > > > ------------------------------ > > Message: 4 > Date: Sun, 27 Nov 2011 13:03:28 +0000 > From: Keith McKay <mckaymeister(a)gmail.com> > To: Ntg-Context <ntg-context(a)ntg.nl> > Subject: [NTG-context] Export to epub > Message-ID: <4ED23520.2070103(a)gmail.com> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > Hi > > I've been playing about with Export in Context with a view to producing > ePubs. > > When I run the script: > > /mtxrun --script epub --make test.specification > > /the test.tree is prepared but no epub file. The output shown below has > a couple or 'error' messages which are probably due to the way my text > editor is set up (Scite Version 2.02). If anyone is using Scite and > producing ePubs I be grateful for some hints on how to set this up so > that inkscape and zip works. > > %%Script Output > > mtx-epub | creating paths in tree test.tree > mtx-epub | copying toc.ncx to test.tree/OPS/toc.ncx > mtx-epub | copying test-styles.css to test.tree/OPS/test-styles.css > mtx-epub | copying test-images.css to test.tree/OPS/test-images.css > mtx-epub | copying test.css to test.tree/OPS/test.css > mtx-epub | copying test.xhtml to test.tree/OPS/test.xhtml > mtx-epub | running command 'inkscape --export-plain-svg=cow.svg > cow.pdf' > > 'inkscape' is not recognized as an internal or external command, > operable program or batch file. > > mtx-epub | copying cow.svg to test.tree/OPS/cow.svg > mtx-epub | copying hacker.jpg to test.tree/OPS/hacker.jpg > mtx-epub | copying mill.png to test.tree/OPS/mill.png > mtx-epub | creating archive > > 'zip' is not recognized as an internal or external command, > operable program or batch file. > 'zip' is not recognized as an internal or external command, > operable program or batch file. > 'zip' is not recognized as an internal or external command, > operable program or batch file. > > mtx-epub | epub archive: test.tree/test.epub>Exit code: 0 > > %%End Script Output > > I'm using Minimals ConTeXt ver: 2011.09.27 20:05 MKIV fmt: 2011.11.19 > int: english/english on a Windows 7 machine and the test.tex file is the > |export-example.tex file renamed from the Minimals distribution|. > > Thanks > Keith McKay > >

2 2

TeX Output
by Martin Fechner 30 Nov '11

30 Nov '11

Hi all, in my project I use an environment with lua-code, xml-setups and some other definitions and settings. Is there an simple way to get an output of the TeX-Stream, which will be used to generate the PDF? So it would be possible to manipulate some TeX-parts manually where the PDF-output have some errors or isn't as expected. Best Regards, Martin

1 0

Footnote rule is not drawn in columnset layout
by Peter Park Nelson 30 Nov '11

30 Nov '11

In my new 2-column columnset layout, the rule above the footnotes is not appearing. I found an old question in the list archive dealing with a similar problem ( http://archive.contextgarden.net/message/20050626.123839.5318050e.en.html) but the relevant code has been changed since then. Is there a problem with my setup (excerpt) below? %%---------------------------------------------------------------------------%% \definecolumnset[body][n=2,distance=2em,balance=yes] % Use superior figures from the font for footnote marks, instead of \high: \defineconversion[supnumbers][\setff{sups}] % Just create space for the footnote number at the bottom of the column: \def\myfootnotecommand#1{\hbox to 1.5em{#1}} \setupnote[footnote] [location=page, numberconversion=supnumbers, numbercommand=, textcommand=, way=bytext, rule=on, align={hanging,hz}, command=\myfootnotecommand] \setupnotedefinition[footnote] [location=left] %%---------------------------------------------------------------------------------%% Thanks, PPN -- Peter Park Nelson peter.park.nelson(a)gmail.com

1 0

context terminal now in gnuplot's CVS
by Mojca Miklavec 30 Nov '11

30 Nov '11

Hello, After 5 years (actually almost 6 - the first t-gnuplot.tex code has been sent to me by Peter Münster on 2nd January 2006) gnuplot developers finally included context terminal into their CVS repository today. (temporary link, but probably slightly more clear than linking to CVS repository) https://github.com/gnuplot/gnuplot-new/commit/62737451bb138f0e679b5a57e0042… The release of gnuplot 4.4.4 was initially planned for around October, which means that it should probably be out sometime soon. Documentation: https://github.com/mojca/context-gnuplot/tree/master/texmf/doc/context/thir… Mojca PS: There are still three pending issues in the area that is rarely used anyway: - I need to fix font switching (I'm currently using \sometxt[gp][iwona,20]{some label} which doesn't work in MKIV and is an ugly hack in MKII) - there are some problems with (draw) externalfigure inside metapost drawings; I might create an abstract layer around that - transparent inline bitmap images don't work and they don't work in MKII at all (partially due to limitations in metapost)

5 5

Columnsets: bug in current beta?
by Peter Park Nelson 29 Nov '11

29 Nov '11

Hello, Following the example in the Columns manual, the following works with TeXLive 2011 but not with the current context suite beta (25 nov 2011): \definecolumnset[body][n=2] \definecolumnsethsize{body}{1}{1}\One \definecolumnsethsize{body}{1}{2}\Two \starttext \startcolumnset[body] \dorecurse{5}{\input tufte\par} \startbuffer \placefigure[btlr]{A placeholder figure.}{\externalfigure[widefigure][width=\Two]} \stopbuffer \dorecurse{5}{\input tufte\par} \getbuffer \stopcolumnset \stoptext Using the current beta, the figure only cleanly spans one column -- vertical space for the graphic and caption is reserved in one column; in the other column, text flows on beneath the graphic, which is superimposed. Using TeXLive 2011, the wide figure spans both columns correctly. Thanks, PPN -- Peter Park Nelson peter.park.nelson(a)gmail.com

3 2

mptopdf missing
by Ernesto Posse 29 Nov '11

29 Nov '11

Hi. I have a fresh installation of ConTeXt on Ubuntu 11.10, straight from Ubuntu's repository (version 2011.05.18.20110627-1) but the mptopdf script seems to be missing, and mtxrun doesn't show any available scripts. What could be the problem? [eposse@flamenco:~/Tests/latex] > mptopdf mptopdf: command not found [eposse@flamenco:~/Tests/latex] > mtxrun --script [eposse@flamenco:~/Tests/latex] > In synaptic's package manager I can see that the following files where installed, but not the actual script... /usr/share/texmf/tex/mptopdf /usr/share/texmf/tex/mptopdf/config /usr/share/texmf/tex/mptopdf/config/mptopdf.ini Thanks -- Ernesto Posse Modelling and Analysis in Software Engineering School of Computing Queen's University - Kingston, Ontario, Canada

3 7

Text in margin
by Kip Warner 29 Nov '11

29 Nov '11

Hey list, I am trying to get text to appear in the margin, small, and italicized. The following doesn't appear to effect its size or italicization at all: \setupinmargin[ background=color, color=colour_text, backgroundcolor=colour_page, bodyfont=3pt, before={\switchtobodyfont[3pt]} style=\ss\tfx\setupinterlinespace] -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

2 6

Sequentially number figures (even over chapters)
by Mikael P. Sundqvist 29 Nov '11

29 Nov '11

Dear list, I want to number my figures sequentially, even over chapters. With the code below (late(st) minimals and mkiv) %%% Begin example \setuphead[chapter][ page=no, ] \setupcaptions[ way=bytext, prefixsegments=none, ] \starttext \chapter{This is a short chapter} It contains one figure. \placefigure[here][none]{A caption.}{\externalfigure[cow][width=4cm]} \chapter{This is another short chapter} It contains the same figure. \placefigure[here][none]{A caption.}{\externalfigure[cow][width=4cm]} \stoptext %%% End example both figures are called "Figure 1". I would expect the second one to be called Figure 2. Any ideas? Best regards, Mikael

2 2

Fields...
by Willi Egger 29 Nov '11

29 Nov '11

Hi Hans, I tried to build a form with fields. However at this moment it looks likely, that there is a problem with fields. I get the following error: interactions > javascripts > loaded: library 'fld' ! LuaTeX error .../base/lpdf-fld.lua:823: attempt to call global 'makelinechine' (a nil value) stack traceback: .../base/lpdf-fld.lua:823: in function <.../base/lpdf-fld.lua:822> (tail call): ? (tail call): ? .../base/scrn-fld.lua:43: in function 'insertfield' <main ctx instance>:1: in main chunk. I attach a minimal example. Kind regards Willi

2 2

Unnumbered chapters (titles) etc in TOC
by Marcin Borkowski 29 Nov '11

29 Nov '11

Hi, I tried this: \definecombinedlist[content][chapter,title,subject,section] \setuphead[title,subject][incrementnumber=list] \starttext \placecontent \title{Unnumbered chapter} \subject{First} \subject{Second} \chapter{Numbered chapter} \section{Third} \section{Fourth} \stoptext and I have a few questions. 1. If I replace \definecombinedlist with \setupcombinedlist (which seems natural, given that "content" is already defined), it stops working; why? 2. The \setuphead line seem to be necessary; why? 3. And the worst: indenting of \titles and \subjects is the same (and of \subsubjects also, if I add them). How to change this? Regards, -- Marcin Borkowski http://mbork.pl

2 1

Too much space in fractions
by Mikael P. Sundqvist 28 Nov '11

28 Nov '11

Dear list, With \starttext $a/b$ and $1/2$ \stoptext I get too much space between a and /, and betwen / and b (and between 1 and /, and between / and 2). This was not so in earlier versions of ConTeXt (not sure when it first appeared). Is there some option I should change or is it a bug? Best regards, Mikael PS I attach the output I get, together with the similar LaTeX output (which looks like I (as a mathematician) am used to)

1 1

starting cambria font?
by Hans van der Meer 28 Nov '11

28 Nov '11

Maybe someone more knowledgeable about fonts can tell what is amiss. I typeset my documents in Lucida Bright with Lucida Math from the old pfb's (the orf version not being available). But there are some gaps in Lucida's math fonts and its implementation in ConTeXt. So I started to switch to another one, at least for the time being, and thought cambria would be the one as I have seen some people on this list about it. But changing t{lucida,sans,12pt} to {cambria,sans,12pt} doesn't work for me. I get an error: ! Missing font identifier. system > tex > error on line 35 in file syllabus-test.tex: Missing font identifier … .. <to be read again> \*cambria7ptmmmr33* \@@ff:cambria:12pt:mm:mr: ... \*cambria7ptmmmr33* \scriptfont \mrfam \*cambr... \dosetmathfamily ...c!mm :#2:\fontsize \endcsname \else \dosetmathfamilyinde... I have downloaded the beta: ConTeXt ver: 2011.11.23 18:58 MKIV Is this one incomplete? Or are the cambria fonts not free? I would appreciate some enlightment. Hans van der Meer

2 1

FLOW chart module broken
by Willi Egger 28 Nov '11

28 Nov '11

Hi Hans, unfortunately the FLOWchart module is broken. The breaking over pages does not seem to work. If there are too many cells for a page the compilation stops with a fatal error. i installed the latest beta: ConTeXt ver: 2011.11.25 21:29 MKIV fmt: 2011.11.27 \@@vars:flowcell:text:text ->Randje $\leq $ 1mm maken <argument> ...]{\getvariable {flowcell:text}{text} } \firstoftwoarguments #1#2->#1 \@@su:flowcell:text:place:indeed ...:text}{text}}} \endgroup \@@su:flowcell:text:place ...ll:text:place:indeed} \fi \fi \endgroup \next1 #1,->\dosetups {#1} \do_process_comma_item ... l.428 ? ! Emergency stop. I include the file I was trying to compile. Kind regards Willi

3 4

Resetting references or local references?
by Otared Kavian 28 Nov '11

28 Nov '11

Dear all, Is it possible to have a sort of « local references for formulas » or else to clear previous references to formulas at a certain point? In a chapter where a certain number of exercices and formulas are to be numbered, assume I have the following minimal example %%%%%%%%% begin \starttext Exercice 1. Prove that if $ab=ba$ and $2ab=0$ then \placeformula[eq:1] \startformula (a+b)^2 = a^2 + b^2. \stopformula Using the identity (\in[eq:1]) prove that $(a=b)^{2n} = a^{2n} + b^{2n}$. \blank[big] \hrule \blank[big] Exercice 2. Prove that for any integer $n$ \resetnumber[formula] %\reset[formulas][references] \placeformula[eq:2] % I would like the reference to be [eq:1] \startformula (\cos(x) + {\rm i}\sin(x))^n = \cos(nx) + {\rm i} \sin(nx). \stopformula Using the identity (\in[eq:2]) % I would like here to say [eq:1] compute $\cos{3x}$. \stoptext %%%%%%%%% end I would like to be able to have the equations numbered within each exercise (which is in fact defined through an enumeration environment), and be able to have the reference to each formula « local » within that exercise. The resaon is that the execises and problems may have several equations which are referenced to with [eq:1] through [eq:10] (say…), and have been prepared and given previously to students on independent sheets. When I want to give out a booklet of all the exercises, then it would be handy to have such a feature. I understand that I am not being very clear… Hope someone would understand what I mean and need :-) Best regards: OK

2 3

Re: [NTG-context] Footnote Problem
by Kip Warner 28 Nov '11

28 Nov '11

On Wed, 2011-11-16 at 00:09 +0100, Wolfgang Schuster wrote: > Am 15.11.2011 um 20:41 schrieb Kip Warner: > > > On Tue, 2011-11-15 at 09:42 +0100, Wolfgang Schuster wrote: > >> Am 15.11.2011 um 06:57 schrieb Kip Warner: > >> > >>> Hey folks, > >>> > >>> The second \footnote doesn't show in the generated PDF. The number is > >>> listed where it should at the end of the sentence, but the text of the > >>> footnote is not listed at the bottom of the page. > >> > >> Add \automigrateinserts to your document. > >> > >> Wolfgang > >> > > > > Thanks Wolfgang, but should that be in the environment file or can it go > > anywhere? > > Put it in the preamble of your document which can be a environment file or just before \starttext. > > Wolfgang Hey Wolfgang. The problem now is that the footnote sits inside of textbackground boxes at the bottom of them. I'd like them instead at the bottom of the page with the rest of my footnotes. How is this done? Sorry to pester you, but you and Hans seem to be the ConTeXt gurus. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

Re: [NTG-context] Graphics in text-line
by Robert Blackstone 27 Nov '11

27 Nov '11

> Am 27.11.2011 um 18:26 schrieb Wolfgang Schuster: > >> Am 27.11.2011 um 18:20 schrieb Robert Blackstone: >> >>> Dear list, >>> >>> Would it be possible to insert a tiny graphic, not larger than a capital M, into a textline? >>> >> >> \starttext >> This is a cow \figuresymbol[cow]. >> \stoptext >> Wolfgang > > > More control about the height gives you this method: > > \defineexternalfigure[inline][height=1.8ex] > > \starttext > This is a cow \externalfigure[cow][inline]. > \stoptext > > Wolfgang This, especially the second method, is exactly what I wanted. Thank you very much Wolfgang. Best regards, Robert Blackstone

1 0

Graphics in text-line
by Robert Blackstone 27 Nov '11

27 Nov '11

Dear list, Would it be possible to insert a tiny graphic, not larger than a capital M, into a textline? I am presently making a bilingual version of a sixteenth century French musical treatise, and I would like to copy as much as possible the typographic features of the original in the modern version, both French and a translation. In the original French edition some text lines contain musical symbols, not only the sharp, flat and natural characters but also some others, of which I can make graphics (png or pdf). I can place these praphics in the margin and even in a footnote (although with rather too much space above it) but I would prefer to have them in their text line. Is that doable? Thanks in advance. Best regards, Robert Blackstone

3 3

strange behavior with apa and apa-fr bibliographic styles
by Alexandre Krispin 27 Nov '11

27 Nov '11

Hello, I have noticed that, for a reason I don't understand, dots after dates in the bibliography are not placed in the same manner. For example, I get (copy-paste from pdf) : Morales, I. (1997) . The mexican crisis and the weakness of the NAFTA consensus. Annals of the American Academy of Political and Social Science, 550 :130-152. Morales, I.(1999). NAFTA : The governance of economic openness. Annals of the American Academy of Political and Social Science, 565 :35-65. Robey, J. S. (1999) . Civil society and NAFTA : Initial results. Annals of the American Academy of Political and Social Science, 565 :113-125. Totman, C. (1980) . From Sakoku to Kaikoku. The Transformation of Forei- gn-Policy Attitudes, 1853-1868. Monumenta Nipponica, 35(1) :1-19. So for the first entry, the point after (1997) is placed after a space, whereas it is not the case for the second entry (there is also no space between I. and (1999)). In some cases (when I add more entries), I even have the point before the parenthesis, though the bib file might be right (or in any cases, since the field are completed in the same manner, I didn't expected different behaviors in the result since it is automatized and all fields are articles). Here is the bib file : %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @article{conrad1980transformation, author = "Conrad Totman", title = "From {S}akoku to {K}aikoku. {T}he {T}ransformation of {F}oreign-{P}olicy {A}ttitudes, 1853-1868", journal = "Monumenta Nipponica", year = 1980, volume = 35, number = 1, pages = "1-19", publisher = "Sophia University", url = "http://www.jstor.org/stable/2384397", } @article{robey1999civil, author = "John S. Robey", title = "Civil Society and {NAFTA}: Initial Results", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1999, month = "September", volume = 565, pages = "113-125", url = "http://www.jstor.org/stable/1049540" } @article{morales1999governance, author = "Isidro Morales", title = "{NAFTA}: The Governance of Economic Openness", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1999, month = "September", volume = 565, pages = "35-65", url = "http://www.jstor.org/stable/1049536" } @article{morales1999mexican, author = "Isidro Morales", title = "The Mexican Crisis and the Weakness of the {NAFTA} Consensus", journal = "Annals of the American Academy of Political and Social Science", publisher = "Sage Publications, Inc.", year = 1997, month = "March", volume = 550, pages = "130-152", url = "http://www.jstor.org/stable/1047712" } %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% And here is what I have for bibliography setup : %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \setupbibtex[database=biblio,sort=author] \setuppublications[alternative=apa-fr,sorttype=bbl,refcommand=authoryear] %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Thanks for your help ! Cheers, Alexandre Krispin -- ------------------------------------------------------------------------------ Alexandre KRISPIN 41 rue Guynemer | 93200 Saint-Denis | France tél : 06 28 76 69 34 | http://bijutsu.toile-libre.org ----------------------------------------------------------------------------

1 0

error with \showlayout and export
by Henning Hraban Ramm 27 Nov '11

27 Nov '11

Hi wizards, if I use \showlayout in a project where I setup export=yes, ConTeXt stops with a fatal error. Minimal failing example: \setupbackend[export=yes] \starttext \showlayout \stoptext Ixchel:konzept hraban$ context --purge context_test.tex mtx-context | run 1: luatex --fmt="/Users/hraban/Library/texmf/tex/ texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/ formats/cont-en" --lua="/Users/hraban/Library/texmf/tex/texmf-cache/ luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont- en.lui" --backend="pdf" "./context_test.tex" \stoptext This is LuaTeX, Version beta-0.70.1-2011051908 (rev 4277) \write18 enabled. (context_test.tex ConTeXt ver: 2011.11.24 15:52 MKIV fmt: 2011.11.25 int: english/ english system > cont-new.mkiv loaded (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/cont- new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > context_test.top loaded (context_test.top) fonts > latin modern fonts are not preloaded languages > language en is active backend > export > enabling export to xml {/Users/hraban/Library/texmf/tex/texmf-context/fonts/map/pdftex/ context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/type- siz.mkiv) (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/ base/type-otf.mkiv) files > readfile > asked name: 'loc', not found {/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/lm/lm- math.map}{/Users/hraban/Library/texmf/tex/texmf-fonts/fonts/map/dvips/ lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded (/Users/hraban/Library/texmf/tex/texmf-context/tex/context/base/page- run.mkiv loading > ConTeXt Page Macros / Runtime Macros ) interface > initialization > loading interface definitions from 'mult-def.lua' interface > initialization > loading interface messages from 'mult-mes.lua' metapost > initializing instance 'metafun' using format 'metafun' metapost > loading 'metafun': /Users/hraban/Library/texmf/tex/ texmf-context/metapost/context/base/metafun.mpiv backend > xmp > using file '/Users/hraban/Library/texmf/tex/ texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 pages > flushing realpage 2, userpage 2 pages > flushing realpage 3, userpage 3 pages > flushing realpage 4, userpage 4 pages > flushing realpage 5, userpage 5 )</Users/hraban/Library/texmf/tex/texmf/fonts/opentype/public/lm/ lmmono10-regular.otf></Users/hraban/Library/texmf/tex/texmf/fonts/ opentype/public/lm/lmmono12-regular.otf></Users/hraban/Library/texmf/ tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf> ! LuaTeX error ...exmf/tex/texmf-context/tex/context/base/back-exp.lua: 1203: attempt to index global 'c' (a nil value). system > tex > error on line 0 in file : LuaTeX error ... <empty file> <*> ./context_test.tex \stoptext ? Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 1

Re: [NTG-context] \unit and Hertz, lux, and degrees/minutes/seconds
by Robin Kirkham 27 Nov '11

27 Nov '11

On 18/11/2011, at 10:00 PM, Pontus Lurcock <pont(a)talvi.net> wrote: > On Fri 18 Nov 2011, Hans Hagen wrote: >> so, best is that those asking for it come up with a list of issues: >> which symbols need this option, is it language related or whatever, >> so that i can do them all at once. We can already have different >> mapping sets so spacing could be part of that. > > I don't personally have a need for units in the foreseeable future (I > was just nitpicking with Robin about spacing) so feel free to ignore > any of my suggestions, but I think the summary so far would be: > > 1. Spacing for almost all SI units should be the same and doesn't > need special cases. > > 2. Geographical degrees/minutes/seconds should have no spaces. > > 3. Spacing for degrees temperature varies according to different style > guides -- both before and after the ° -- so ideally it would be > possible to set these independently of the rest of the units. > > For my own part I would add: > > 4. SI unit abbreviations are mostly capital letters, and look (to me) > strange with old-style figures. I have seen books which used > old-style figures for page numbers, years, etc. but switched to > lining figures when a unit was involved; this is also what I did > in my thesis. So I think it would be useful to allow an automatic > switch to lining figures to be configured when typesetting a unit. > > Pont I agree on points 1 and 2 (although it seems arcminute and arcsecond are not implemented anyway). Point 3, yes, but I'm dubious about space after ° for the temperature units °C or °F as it breaks the rule about unit ambiguity ("° C" is a degree-Coulomb -- although I can't image a physical situation that would need such a unit). Point 4 is a bit beyond the scope of the SI units scheme but sounds like a potential need. Over the weekend I've discovered a couple more problems with \unit so I'll make up some test cases and desired output and post it in a few days. Robin

7 11

Re: [NTG-context] Footnote Problem
by Kip Warner 27 Nov '11

27 Nov '11

On Wed, 2011-11-16 at 00:09 +0100, Wolfgang Schuster wrote: > Am 15.11.2011 um 20:41 schrieb Kip Warner: > > > On Tue, 2011-11-15 at 09:42 +0100, Wolfgang Schuster wrote: > >> Am 15.11.2011 um 06:57 schrieb Kip Warner: > >> > >>> Hey folks, > >>> > >>> The second \footnote doesn't show in the generated PDF. The number is > >>> listed where it should at the end of the sentence, but the text of the > >>> footnote is not listed at the bottom of the page. > >> > >> Add \automigrateinserts to your document. > >> > >> Wolfgang > >> > > > > Thanks Wolfgang, but should that be in the environment file or can it go > > anywhere? > > Put it in the preamble of your document which can be a environment file or just before \starttext. > > Wolfgang Hey Wolfgang. The problem now is that the footnote sits inside of textbackground boxes at the bottom of them. I'd like them instead at the bottom of the page with the rest of my footnotes. How is this done? -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

captions trouble
by Meer, H. van der 26 Nov '11

26 Nov '11

Something seems amiss in the code below. The idea is having in general figures with numbered labels, but now and then a figure without. First I thought to use [location=none] on the placement, but then the numbering is not interrupted: label-1 (label-2 invisible), label-3. That is disturbing to the reader who will think a figure is missing. The numbering and the label are suppressed by \setupcations[number=no] and reinstated with \setupcaptions[number=yes]. But this kills the space between the label and the caption. I enclose a minimal example that shows the effect. Could this be a bug? \setuppapersize[A6][A6] \starttext \placefigure[][fig:1]{label with space}{\externalfigure[arrows.pdf]} \setupcaptions[number=no] \placefigure{}{\externalfigure[arrows.pdf]} \setupcaptions[number=yes] \placefigure[][fig:3]{label without space}{\externalfigure[arrows.pdf]} \stoptext Hans van der Meer

3 4

Feature request: criterium=component
by Idris Samawi Hamid ادريس سماوي حامد 26 Nov '11

26 Nov '11

Dear inner circle, I have two components, each a book in its own right, and each with multiple \part's, \chapter's, \section's etc. Through products and components I have all crossreferences between the two books set up, thanks to the mechanisms put in place this fall by Hans. I compile both components through the product file. Problem: I cannot separate the list of Tables in component~1 from those in component~2. So a list of Tables in component~1 contains the tables in component~ and vice versa. For TOC I was able to get around this by defining, for component~2, mirror section heads with different names but identical functionality to those in component~1. But for tables I have not been able to get this work-around to work: http://archive.contextgarden.net/message/20111124.203204.79333c77.en.html So, in any case, it sames that adding a criterium=component option would be the most user-friendly way to handle this kind of case. Is it feasible? Thnx in advance and Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

2 2

Change the gap between image and caption
by Jaroslav Hajtmar 25 Nov '11

25 Nov '11

Hello ConTeXt folks. Is it possible to adjust the size of the gap between the lower edge of the picture and its caption in simple externalfigure command? By experimenting I found that this gap can be set in a floating environment (placefigure) using "inbetween" parameter. Is there possibilities do gap somehow larger or smaller in externalfigure environment? See minimal example. Thanx Jaroslav \starttext \setupcaptions[number=no,style=\ssxx,inbetween={\blank[1cm]}] \setupfloats[spacebefore=none, spaceafter=none] % \input tufte \placefigure[here]{Here is farther caption} {\externalfigure[mill][type=jpg,metod=jpg,width=5cm,frame=on]} \input tufte \page \startTEXpage \startcombination[3*1] {\externalfigure[cow][frame=on]}{This caption has to be more distanced.} {\externalfigure[cow][frame=on]}{This title has yet to be more distanced.} {\externalfigure[cow][frame=on]}{This label is to be closer to figure.} \stopcombination \stopTEXpage \stoptext

2 4

\start- \stopalign (in formulas) is broken
by Andreas Harder 25 Nov '11

25 Nov '11

Hi, with the latest beta the following do not work anymore (example from math-ali.mkiv). \starttext \placeformula \startformula \startalign \NC a \EQ b \NR[+] \NC c \EQ d \NR \NC \EQ f \NR[for:demo-a-1] \NC \EQ g \NR[for:demo-a-2][a] \NC \EQ h \NR[for:demo-a-3][b] \NC \EQ i \NR \stopalign \stopformula \stoptext error: Missing number, treated as zero … Regards Andreas

2 1

float names and lists
by Idris Samawi Hamid ادريس سماوي حامد 25 Nov '11

25 Nov '11

Dear gang, Consider the following: ================= \definefloat[tablecw] % \setupfloat[tablecw] \setupcaption[tablecw][prefix=Table] \starttext \setupfloats[location=middle] \placetable [here] [tablecw:test]{A Caption.} {\starttable[|c|c|c|] \HL \VL Test \VL Test \VL Test \VL\FR \HL \stoptable} \setupfloats[location=middle] \placetablecw [here] [tablecw:test]{A Caption.} {\starttable[|c|c|c|] \HL \VL Test \VL Test \VL Test \VL\FR \HL \stoptable} \placelistoftables % \placelistoftablescws \stoptext ================= Two challenges: 1. How do I change the prefix that heads the caption of a table? For example, \definefloat[tablecw] produces Tablecw 1 I want to keep the command name of the float but change the prefix. I tried things like \setupcaption[tablecw][prefix=My Table] \setupcaption[tablecw][name=My Table] but no success. 2. \placelistoftablescws produces an undefined control sequence: What am I missing here? Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

4 7

interaction?
by Hans van der Meer 25 Nov '11

25 Nov '11

I have troubles with interaction in a screen document. (1) I took the example from the wiki: \setuppapersize[A6][A6] \setupinteraction[state=start] \setupreferencing[interaction=all] \starttext Reference is here <\reference[label:1]{Some text}> \page[yes] % Insert page break Link to \goto{some text elsewhere}[label:1]. \stoptext Although the link on page-2 brings me to page_1, the contents of {Some text} has completely disappeared. Why is this? What is the essence of having this argument if it is not displayed? (2) Transfering this code to a more complex document containing other references, to figures, tables etc. makes the action disappear! Clicking then does nothing, although the links to the figures and tables can be used. The link works when the code above is placed BEFORE \completecontent. But becomes incative when put BEHIND it. The index however has links transferring to the various part of the3 document. Please can some enlighten me? Why are links through \placefigure, \placetable alive and those with \reference-\goto are not? Hans van der Meer

3 3

two column itemize page breaking
by Troy Henderson 25 Nov '11

25 Nov '11

Occasionally when I use a two column itemize like \startitemize[n,a,columns,two] \item some text\column \item some more text \stopitemize near the bottom of a page, the second column item gets sent to the next page but the first column item stays on the current page. This is peculiar since they should "stay together". I would appreciate any advice on how to solve this problem. Thanks, Troy Henderson

2 1

Table cell colo(u)rs
by Pavneet Arora 25 Nov '11

25 Nov '11

Hello, I am trying to do a simple cell background shading in a table using the example at the wiki: http://wiki.contextgarden.net/Table Unfortunately, I get an "Undefined control sequence ..." error: ! Undefined control sequence. system > tex > error on line 4 in file tmp.tex: Undefined control sequence ... 1 \setupcolors[state=start] 2 \starttable[|l|l|] 3 \HL 4 >> \BL[1]\SR 5 \NC Command \NC Meaning \NC\SR 6 \HL 7 \NC \tex{NC} \NC next column \NC\FR 8 \NC \tex{NR} \NC next row \NC\LR 9 \HL 10 \CL[green]\SR 11 \NC \tex{AR} \NC automatic row\NC\SR 12 \HL 13 \stoptable 14 <recently read> \BL l.4 \BL [1]\SR ? Any suggestions? advTHANKSance -- ----- - Pavneet Arora Bespoke Spaces. We build smart spaces. www.bespokespaces.com 416.937.9276

5 4

[Regression] math: alignment parameters confused
by Paul Menzel 25 Nov '11

25 Nov '11

Dear ConTeXt folks, there must be a regression between ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2011.7.24 int: english/english and ConTeXt ver: 2011.10.14 22:47 MKIV fmt: 2011.10.15 int: english/english. Using the minimal example \starttext \placeformula \startformula \startmathalignment[n=4, align={left, right, middle, left}] \NC A \NC B \NC C \NC D \NR \NC AA \NC BB \NC CC \NC DD \NR \stopmathalignment \stopformula \stoptext the last row is aligned like middle instead of left. Thanks, Paul

3 3

Text in margin
by Kip Warner 25 Nov '11

25 Nov '11

Hey list, I am trying to get text to appear in the margin, small, and italicized. The following doesn't appear to effect its size or italicization at all: \setupinmargin[ background=color, color=colour_text, backgroundcolor=colour_page, bodyfont=3pt, before={\switchtobodyfont[3pt]} style=\ss\tfx\setupinterlinespace] -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

Double height rows using natural tables?
by Pavneet Arora 25 Nov '11

25 Nov '11

I have tried various combinations and have so far been unsuccessful in getting a row of double height using natural tables. I am following up and enclosing a minimal example, along with the a previous incarnation using TABLE, which does give me the intended layout. Any suggestions on how to do the same using natural tables would be greatly appreciated. advTHANKSance. -- ----- - Pavneet Arora

2 7

caption "none"
by Thomas A. Schmitz 25 Nov '11

25 Nov '11

Has something changed here? With the latest beta, \placefigure[none] places a caption; and didn't use to: \starttext \placefigure[here]{none}{\externalfigure[cow][width=5cm]} \stoptext Or has this behavior been replaced with something else? Thomas

3 3

Re: [NTG-context] Something similar to MarVoSym package for ConTeXt
by Pavneet Arora 25 Nov '11

25 Nov '11

Just to answer my own question. A list member suggested that I search for the keyword `symbols'. I had indeed referred to the wiki before posting, but entered as a search the singular `symbol' rather than the plural. What I got back as the lead item: http://wiki.contextgarden.net/Reference/en/symbol Thanks again for pointing me in the right direction. -- ----- - Pavneet Arora Waroc Fine Audio + Custom Home Cinema www.waroc.com 416.937.WAROC (9276)

1 0

Text in a box now broken
by Kip Warner 24 Nov '11

24 Nov '11

Hey folks, I noticed as of maybe a week ago, that all of the text I have positioned inside of a box has disappeared. I can see everything else, as before, but not the stuff in the box. The box just shows up as a mangled line. The following is a minimal example from ConTeXt version 2011.11.17 09:18. This code was working just fine a few days ago. \definestartstop [TimelineDocument] [before={ \crlf \setupbackground[frame=on, before=\blank, after=\blank, corner=round, topoffset=0.5cm, leftoffset=0.5cm, rightoffset=0.5cm, bottomoffset=0.5cm] \startbackground }, after={ \stopbackground \crlf }, commands={\setupalign[yes]}, style=italic] \starttext \startTimelineDocument Some stuff in a box. \stopTimelineDocument \stoptext Thanks a lot. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

3 14

Something similar to MarVoSym package for ConTeXt
by Pavneet Arora 24 Nov '11

24 Nov '11

I am in need of some networking and other computer communications symbols. Is there something similar to the MarVoSym package for LaTeX? Or if there is a symbol font recommendation, that would be helpful as well. Many thanks. -- ----- - Pavneet Arora

2 1

xtable (\getbuffer vs. \processxtablebuffer)
by Andreas Harder 24 Nov '11

24 Nov '11

Hi Hans, it seems \processtablebuffer ignores the table settings (at least the stretch-option). \starttext \startbuffer[my:xtable] \startxtable[option=stretch] \startxrow \startxcell alpha \stopxcell \startxcell beta \stopxcell \startxcell gamma \stopxcell \stopxrow \stopxtable \stopbuffer \getbuffer[my:xtable] \blank \processxtablebuffer[my:xtable] \stoptext Regards Andreas

2 2

Regression: A^\prime causes `Missing { inserted ...`
by Paul Menzel 24 Nov '11

24 Nov '11

Dear ConTeXt folks, having upgraded ConTeXt ver: 2011.10.14 22:47 MKIV fmt: 2011.10.15 int: english/english. to ConTeXt ver: 2011.11.23 18:58 MKIV fmt: 2011.11.24 int: english/english With \starttext \placeformula \startformula A^\prime \stopformula \stoptext I get the following error. fonts > fallback modern rm 12pt is loaded ! Missing { inserted. system > tex > error on line 4 in file exponent-regression.tex: Missing { inserted ... 1 \starttext 2 \placeformula 3 \startformula 4 >> A^\prime 5 \stopformula 6 \stoptext 7 <to be read again> ^ \prime ...char \textfont \zerocount "FE325\relax ^ \bgroup \expandafter \dodo... l.4 A^\prime ? As a workaround `A^{\prime}` can be used. Thanks, Paul

4 6

url: subscripts not displayed
by Paul Menzel 24 Nov '11

24 Nov '11

Dear ConTeXt folks, using ConTeXt ver: 2011.11.23 18:58 MKIV fmt: 2011.11.24 int: english/english in the following “minimal” example the subscript in H₂O Books is not displayed in the *URL*. \setupinteraction[state=start] % Define \Site[id][url]{description} to put in a clickable link % with footnoted URL \def\Site[#1][#2]#3{\useURL[#1][#2][][#3]\from[#1]\footnote[#1]{\tt\hyphenatedurl{#2}}} \setupbibtex[database=bib] \starttext Everybody should read the \MetaFun\ manual \cite{hh2010}. Buy it at \Site[h2obooks][http://www.h2o-books.com/]{H₂O Books}. I like \Site[context][http://www.contextgarden.net]{\ConTeXt}. This sentence has a footnote.\footnote{This is a footnote.} \completepublications[criterium=all] \stoptext Thanks, Paul

3 8

BibTeX files for ConTeXt books?
by Paul Menzel 24 Nov '11

24 Nov '11

Dear ConTeXt folks, there are some ConTeXt related books for sale [1]. Are there BibTeX files for those available? Thank, Paul [1] http://www.h2o-books.com/catalog/5

1 0

Combinations without any vertical space
by Aditya Mahajan 24 Nov '11

24 Nov '11

How do I create combinations without any vertical space? The following test file \definecombination [overviewpage] [distance=\zeropoint, inbetween=, ] \starttext \startcombination[overviewpage][2*2] {\framed{Hello}}{}% {\framed{Hello}}{}% {\framed{Hello}}{}% {\framed{Hello}}{}% \stopcombination \stoptext gives the attached result. Note that there is still vertical space between the two rows. How can I get rid of this space? Aditya

3 3

Layout: partial width blocks
by Peter Park Nelson 24 Nov '11

24 Nov '11

Hello again, I'm working on a 2-column layout for a journal, and I want to keep the title and abstract of each article from running across the full width of the page (a small graphic will appear in the upper right corner of the first article page). For the article title, this works: \def\ArticleTitle#1#2% {\hbox to \hsize\bgroup \setupframed[frame=off]% \tbox{\framed[offset=0pt,width=.8\makeupwidth,align=right]{#2}}% \hfill \egroup} \setuphead[title][% header=high, before={\hbox{}\blank[5mm]\vfill{}}, after={\hbox{}\blank[5mm]\vfill{}}, command=\ArticleTitle, style=\tfb\se, textstyle=\ss] And for the abstract, I have come up with this: \definebodyfontenvironment[10pt][text=10pt,interlinespace=12pt] \defineframedtext[topwidth][% style={\switchtobodyfont[10pt]}, width=.8\makeupwidth, offset=0pt, frame=off] \definedescription[abstract][% location=serried, width=broad, headstyle={\ss\se}, text={Abstract}, before=\starttopwidth, after=\stoptopwidth] However I can't control the lineheight within the abstract; I'm stuck with the default lineheight but I would ilke it to be larger. 1. Can someone tell me why I can change the font size inside the abstract block but not control the line height? 2. Is there a more efficient way of defining an area that is narrower than the full page width to hold these items, instead of using defineframedtext/definedescription for each one? Thanks, PPN -- Peter Park Nelson peter.park.nelson(a)gmail.com

1 0

Re: [NTG-context] Natural Tables---Including a bit of cell
by Pavneet Arora 24 Nov '11

24 Nov '11

Hans, This didn't quite achieve what I was looking for. I was hoping for the formatting of circuit 4 in the output file test.pdf, rather than what was produced for circuit 8. I modified the definition of \spare so that by default a 15A breaker is assumed unless otherwise specified. However, a more pressing problem is this: If I remove the comments from the row previous, i.e., I have two rows for which I want nr=2, I get the strange artifact in test+.pdf where the second row gets wrapped up a row. Even with the comments in place, the last row is single height. What I really want are two double height rows similar to circuits 2 and 4 but for the entire row. advTHANKSance > Message: 1 > Date: Wed, 23 Nov 2011 09:38:51 +0100 > From: Hans Hagen<pragma(a)wxs.nl> > To: pavneet_arora(a)waroc.com, mailing list for ConTeXt users > <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Natural Tables---Including a bit of cell > style in a \define > Message-ID:<4ECCB11B.2010805(a)wxs.nl> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 22-11-2011 13:08, Pavneet Arora wrote: >> I am creating documentation labeling the circuits of electrical and >> network panels for a project of mine. >> >> Enclosed is a minimal example. >> >> What I would like is to define two macros: \unused and \spare (\unused >> referring to a circuit with no breaker installed, while \spare referring >> to a circuit with a breaker, but no load). I wish these definitions to >> not only include the represented text and font directives, i.e., {\tt >> [Unused]}, but also shade the cell in a background color. However, I >> cannot seem to figure out how to do that. Including the >> `[background=color,backgroundcolor=gray]' in the \define seems to be >> expanded back simply as text. >> >> Any suggestions? > > \define\unused > {\inframed > [foregroundstyle=type, > background=color, > backgroundcolor=gray, > frame=off] > {[Unused]}} > > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- -- ----- - Pavneet Arora

2 1

Bug with location=nonumber
by Aditya Mahajan 24 Nov '11

24 Nov '11

Hi, Consider the following test file \starttext \startplacefigure[location={here,nonumber}, title=none] test \stopplacefigure \startplacefigure[location={here,nonumber}, title={test}] test \stopplacefigure \stoptext The title of the second figure is displayed. The "bug" is because I have used location=nonumber in the first figure. If I remove `nonumber` from the first figure and use \startplacefigure[location=here, title=none] then the title of the second figure is displayed. Aditya

2 2

Metapost graphics in separate file, help needed
by Christian 24 Nov '11

24 Nov '11

Dear List, I am experiencing a strange problem. I have a project, essentially with the following structure (desperate attempt to keep track of my stuff): mainfile.mkiv: % BOF ...lots of setups and settings... \starttext \input metapostgraphics.mkiv \input chapter1.mkiv \input chapter2.mkiv \input chapter3.mkiv \stoptext % EOF I generate the PDF with 'context mainfile.mkiv' So far for the structure. Now my problem: metapostgraphics.mkiv contains several (4) metapost graphics with \startuseMPgraphics{nameX} ... \stopuseMPgraphics. In chapter2.mkiv I want to use them with \useMPgraphics{nameX}. It worked well until today, when I added a fifth graphic. Then I suddenly get a frame with 'undefined' inside instead of the picture. I tried everything, checked for typos, tried different names, double checked the MP-code etc. but to no avail. It only works if I put the exact same MP-code between \startMPcode \stopMPcode directly in the chapter2.mkiv What is wrong here? Am I missing something? Did I get the input mechanism all wrong?

3 6

Streams
by Willi Egger 23 Nov '11

23 Nov '11

Hi, I was looking for a possibility to typeset an article left in the original language and right in the translation.I found then the mail of Thomas, when he announced the availability of streams (2006). - Great, that is what I am looking for! However when issuing \usemodule[streams] I get immediately a fatal error: undefined controlsequence. I believe is \defineoutputstream. So it looks like the module is broken. - Is there another approach to get two texts in different languages next to each other? Kind regards Willi

2 2