- ntg-context - NTG Mailing Lists

\setuppagenumber
by Alan Bowen 02 Apr '12

02 Apr '12

I have a product file \startproduct prd_Aestimatio_vol-09 %prelims \setuppagenumber[numberconversion=romannumerals] \setuppagenumber[number=1] \setupfootnotes[conversion=numbers] \component c_A \component c_B \component c_C ... %text \setuppagenumber[numberconversion=numbers] \setuppagenumber[number=1] \resetnumber[footnote] \component c_2012-01_Author1.tex ... \stopproduct It compiled nicely before; but now, with the latest beta (2012.03.30 16:16), the page number of the Author1 file is 18 and not 1. The switch from roman to arabic numerals is OK. Has the been some refinement of the command? Alan

2 2

\em after font fallbacks
by S Barmeier 02 Apr '12

02 Apr '12

My main font is Japanese and I'm falling back on a different font for Latin characters. The \it switch works fine, but \em renders the Japanese font (e.g. page numbers in the index). Is there a way to have \em use the italic (of the fallback font)? Thanks, Severin

2 3

Re: [NTG-context] Page numbering in latest beta
by Hans Hagen 02 Apr '12

02 Apr '12

On 30-3-2012 18:41, Steffen Fritzsche wrote: > Hi Hans, > > I just ran my update script again, the issue still exists. Last update before was this morning around 10 a.m. CEST. >>> Any ideas or suggestions? The old numbering code had a side effect. Every time one changes settings the state of the counters needs to be synchronized and in fact a reset happened. Now, normally this is no big deal, as one sets up things at the beginning of a document. However, when mid document one wants to change the style, this reset becomes annoying. (The linenote bug reported a few days ago was a side effect of this.) So, now we don't reset any longer unless the 'start' key's value differs. As a consequence one needs to be explicit in some cases, like yours. By default, we number per text (we could change that if needed) but in the past the \setupuserpagenumber triggers a synchronization of the counter and therefore reset the number, so that obscured the fact. Now, you just need to set the 'way': \starttext \setupuserpagenumber[way=byblock] % can be default .... yes/no? \setuppagenumbering [alternative=doublesided, partnumber=no, location=, style={\ss\bold}] \setupheadertexts [section][pagenumber][pagenumber][chapter] \setupheader [before={\ss\switchtobodyfont[10pt]}] \startsectionblockenvironment[frontpart] \setupuserpagenumber[numberconversion=romannumerals] \stopsectionblockenvironment \startsectionblockenvironment[bodypart] \setuppagenumber[number=1] \stopsectionblockenvironment \startsectionblockenvironment[backpart] \setupuserpagenumber[numberconversion=numbers] \stopsectionblockenvironment \startsectionblockenvironment[appendix] \setupuserpagenumber[numberconversion=numbers] \stopsectionblockenvironment \startfrontmatter test \stopfrontmatter \startbodymatter test \stopbodymatter \startappendices test \stopappendices \startbackmatter test \stopbackmatter \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

Multiple font fallbacks
by S Barmeier 02 Apr '12

02 Apr '12

I tried \definefontfallback[fallback1] \definefontfallback[fallback2] and then \definefontsynonym[][][fallbacks={fallback1,fallback2}] and failed. What is the correct syntax? Thank you, Severin

2 1

Text background broken frame
by Kip Warner 02 Apr '12

02 Apr '12

Hey list, The following minimal seems to identify a problem with making the frame border's of text backgrounds vanish. \definetextbackground[ExampleFrame] [frame=on] \definetyping [Example] [before=\startExampleFrame, after=\stopExampleFrame] % To move footnotes inside of text boxes to the bottom of the page with % the rest of the footnotes. When uncommented, kills frame... \kindofpagetextareas\plusone \starttext \startExample Some text \stopExample \stoptext If you comment out the \kindofpagetextareas\plusone line, it works fine. Is this the expected behaviour? I am using it at the suggestion of Hans to help mitigate a problem with footnotes inside of text boxes. http://archive.contextgarden.net/message/20111222.082458.06567594.en.html I am using ConTeXt version 2012.03.30 16:16. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

Typescript not found
by S Barmeier 02 Apr '12

02 Apr '12

I have some typescript problems. The output says fonts > typescripts > unknown: library 'mytypescript' fonts > typescripts > unknown: library 'Myface' fonts > preloading latin modern fonts (third stage) In my environment file I have \usetypescriptfile[mytypescript] \usetypescript[MyIPAex] \setupbodyfont[Myface,rm,12pt] and the typescript file is in the same folder as the source files. What am I doing wrong? Thanks, Severin

3 5

Using comma character inside chemical
by Jaroslav Hajtmar 01 Apr '12

01 Apr '12

Hello all, Is there a way to use comma character or semicolon character inside the chemical formula? Comma character is used as a delimiter of individual items in the formula. When is there command for example \lettertilde, is there something like "\lettercomma (\charcomma)", "\lettersemicolon (\charcomma)" and others nonalphanumerics characters (which would be used inside chemical or mathematical environment)? Emergency, we can solve as follows: \unexpanded\def\charcomma{,} \chemical{0\charcomma5\cdot, etc.} Is there is a more elegant solution? Thanx Jaroslav

2 2

Re: [NTG-context] Strange errors on using setupheader
by Malte Stien 01 Apr '12

01 Apr '12

Hi Wolfgang, Thank you so much for that. It did work. And yes, I was wondering whether there was a more elegant way of doing this. This way of setting and using variables does not seem to be all that well documented; it's not in the ConTeXt Manual, presumably because it is new, right? I think I mostly worked it out, though, except for: What does this line mean: set=\texsetup{titlepage} Thank you again, Malte.

2 1

columnar footnotes
by Pablo Rodríguez 01 Apr '12

01 Apr '12

I'm trying to get a particular footnote series in columns. The body and other footnotes and line notes have no columns. Consulting the wiki, I thought this is the right code for it: \setupcolumns[n=2] \definenote[dict] \setupnote[dict][before=\stopcolumns, after=\startcolumns] \starttext \dorecurse{10}{a\footnote{b}\dict{c}} \stoptext But I get an error and the document doesn't compile. I don't know what is wrong here (although I realize that my mistake may be basic). Could anyone tell me what I am doing wrong here? Thanks for your help, Pablo -- http://www.ousia.tk

2 2

Strange errors on using setupheader
by Malte Stien 31 Mar '12

31 Mar '12

Hi again, After I had some issues with \externalfigure, Hans suggested to me that I use a newer version of ConTeXt. So, rather than using the latest current (which seems to be from May 2011) ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2011.12.6 int: english/english I am not using the latest beta ConTeXt ver: 2012.03.29 11:28 MKIV fmt: 2012.3.29 int: english/english However, as it turns out, the document I am working on is no longer processed without errors. I butchered my document to isolate the error and come up with a (close to) minimal example: % Use UTF encoding \enableregime[utf] % Set English as the language \language[en] % Select A4 as the paper size \setuppapersize[A4] % Setup the header... \setupheadertexts[chapter][section] \setupheader[leftwidth=.5\hsize, rightwidth=.4\hsize] \starttext \startfrontmatter \completecontent \chapter{Purpose and Scope} \section[]{Purpose} This document should be read in conjunction with bla bla bla... \stopfrontmatter \stoptext I get the following error when processing with the aforementioned version: <argument> doifelsemarking("\ascii ") \ctxcommand #1->\directlua \zerocount {commands.#1 } \page_layouts_process_element_single_limited ...i {\limitatetext {\getmarkin... \page_layouts_process_element_single_indeed ...#4} \fi \endgroup \page_layouts_process_element_single ...#1#2#3{#4} \fi <argument> ...\layoutelementparameter \c!lefttext \hss }\hskip -\makeupwidth... ... l.18 \chapter{Purpose and Scope} Strangely enough, all works well when I remove (or comment) the \setupheader line. Is there anything strange I am doing here? Should work, right? Any pointers would be appreciated. Thank you, Malte.

3 5

stretched hyphenated url
by Steffen Wolfrum 30 Mar '12

30 Mar '12

Hi, I, personally, like the solution for hyphenated url (by stretching). Only a author of mine feels that it was too much (see attached, first line). Is there a way to adjust the degree of stretching? Steffen -------

2 3

Page numbering in latest beta
by Steffen Fritzsche 30 Mar '12

30 Mar '12

Hi, nice surprise, with the latest beta my document just grew 15 pages ;) On a closer look, it turned out that the numbering of my body part is not reset to 1, instead it continues with the next number after my frontpart. Here is how I did set this up long time ago: \startsectionblockenvironment[frontpart] \setupheader [before={\ss\switchtobodyfont[10pt]}] \setupheadertexts [section][pagenumber][pagenumber][chapter] \setuppagenumbering [alternative=doublesided, partnumber=no, location=, style={\ss\bold}] \setupuserpagenumber[numberconversion=romannumerals] \stopsectionblockenvironment \startsectionblockenvironment[bodypart] \setupheader [before={\ss\switchtobodyfont[10pt]}] \setupheadertexts [section][pagenumber][pagenumber][chapter] \setuppagenumbering [alternative=doublesided, partnumber=no, location=, style={\ss\bold}] \setuppagenumber[number=1] \stopsectionblockenvironment \startsectionblockenvironment[backpart] \setupheader [before={\ss\switchtobodyfont[10pt]}] \setupheadertexts [chapter][pagenumber][pagenumber][chapter] \setuppagenumbering [alternative=doublesided, partnumber=no, location=, style={\ss\bold}] \setupuserpagenumber[numberconversion=numbers] \stopsectionblockenvironment \startsectionblockenvironment[appendix] \setupheader [before={\ss\switchtobodyfont[10pt]}] \setupheadertexts [section][pagenumber][pagenumber][chapter] \setuppagenumbering [alternative=doublesided, partnumber=no, location=, style={\ss\bold}] \setupuserpagenumber[numberconversion=numbers] \stopsectionblockenvironment Any ideas or suggestions? Thanks in advance! Steffen

3 2

Seeking the incompatibility of versions of ConTeXts
by Jaroslav Hajtmar 29 Mar '12

29 Mar '12

Hello all, I am seeking the incompatibility of ConTeXt minimals standalone and ConTeXt MKIV, which is part of TeXLive the 2011. While TeXLive 2011 ConTEXt MKIV translates example bottom easily then standalone MKIV gives an error. An example is taken from wiki.contextgarden. Just for the record: I am using with success this solution with few luascrips for a simple bibliography (sorting etc.), but only in ConTEXt MKIV TeXLive 2011. I want use it in mimimals standalone too. Thanx. Jaroslav Hajtmar Here is my example: \definereferenceformat[cite][left={[},right={]}] \defineitemgroup [bibliography] [levels=1] \setupitemgroup [bibliography][each][s,packed] \setupitemgroup [bibliography] [symbol=n, left={[}, right={]}, width=3em, stopper=, itemalign=flushleft] \appendtoks\let\bibitem\itemgroupitem\to\itemgroupcommands \def\Cite[#1]{\cite[bibl:#1]} \starttext \section{Links to the bibiopgraphy} Sample calls citations in the text. The numbers in square brackets are references to bibliography. Here is the first link \Cite[3] and here next cite \Cite[4], \Cite[1], \Cite[5]. \section{Bibliography} \startbibliography \bibitem[bibl:1] First publication \bibitem[bibl:2] Second publication \bibitem[bibl:3] Third publ. \bibitem[bibl:4] Fourth publ. \bibitem[bibl:5] Fifth publ. \stopbibliography \stoptext

5 5

linenote bug with number=no in latest beta?
by Pablo Rodríguez 29 Mar '12

29 Mar '12

Hi there, I can suppress numbers in footnotes, but not in linenotes, as the following sample shows with latest beta: \setupnotation[footnote][location=columns,number=no] \definelinenote[dict] \setupnotation[dict][number=no] \starttext \dorecurse{10}{a\footnote{b}\dict{c}} \stoptext I guess it might be a bug. Pablo -- http://www.ousia.tk

2 1

Removing the quotes from the results of the reference links
by Jaroslav Hajtmar 29 Mar '12

29 Mar '12

Hello all, I can not find a way to remove the quotes from the results of the reference link Can someone help? Thanx Jaroslav Hajtmar Here is minimal example: \starttext \section[first]{First} \subsection[second]{Second} \input tufte \in{(see section}{ \about[second] at page \at[second])}[second]. \stoptext

7 14

Re: [NTG-context] Rotating externalfigure
by Malte Stien 29 Mar '12

29 Mar '12

Wolfgang, Interesting. I was able to reproduce the problem with your verbatim minimal example: \starttext \input knuth \placefigure[left]{Cow}{\externalfigure[cow][frame=on, scale=500, orientation=90]} \input knuth \input knuth \stoptext I have uploaded the result here: http://www.sendspace.com/file/rmbsrj The cow gets rotated but protrudes the frame at the top overlaying the text. Just in case it is relevant, here is my context version: ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2011.12.6 int: english/english Thank you for looking into this. Regards, Malte. On 29/03/2012, at 19:51, ntg-context-request(a)ntg.nl wrote: > Send ntg-context mailing list submissions to > ntg-context(a)ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request(a)ntg.nl > > You can reach the person managing the list at > ntg-context-owner(a)ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Re: Rotating externalfigure (Wolfgang Schuster) > 2. Removing the quotes from the results of the reference links > (Jaroslav Hajtmar) > 3. Re: Removing the quotes from the results of the reference > links (Wolfgang Schuster) > 4. Re: Removing the quotes from the results of the reference > links (Alan BRASLAU) > 5. Re: Removing the quotes from the results of the reference > links (Steffen Wolfrum) > 6. Re: Removing the quotes from the results of the reference > links (Hans Hagen) > 7. Re: Removing the quotes from the results of the reference > links (Mojca Miklavec) > 8. Re: Removing the quotes from the results of the reference > links (Hans Hagen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 29 Mar 2012 08:37:03 +0200 > From: Wolfgang Schuster <schuster.wolfgang(a)googlemail.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Rotating externalfigure > Message-ID: <5B98FDA3-DD52-47AB-8E5C-CE2B8DCA29E1(a)googlemail.com> > Content-Type: text/plain; charset=windows-1252 > > > Am 29.03.2012 um 01:07 schrieb Malte Stien: > >> Hi all, >> >> I am trying to rotate a figure on a page. I believe it should work as follows: >> >> \placefigure[left]{Some figure caption}{\externalfigure[some-figure-caption][orientation=90]} >> >> ...and the figure does indeed get rotated, but the bounding box appears to be incorrect. The figure ends up being far too small and actually overlays the text above it. I found a couple of posts on the mailing list from years ago regarding this, where people seemed to have related issues. >> >> Is there a solution to this? Should this work or am I doing something wrong? I could rotate the figure in the source application, but that is not ideal. > > Do you have a example because I can?t reproduce it with this example. > > \starttext > > \input knuth > > \placefigure[left]{Cow}{\externalfigure[cow][frame=on,scale=500,orientation=90]} \input knuth > > \input knuth > > \stoptext > > Wolfgang > > ------------------------------ > > Message: 2 > Date: Thu, 29 Mar 2012 08:50:06 +0200 > From: Jaroslav Hajtmar <hajtmar(a)gyza.cz> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <4F74061E.7000007(a)gyza.cz> > Content-Type: text/plain; charset=ISO-8859-2; format=flowed > > Hello all, > I can not find a way to remove the quotes from the results of the > reference link > Can someone help? > > Thanx > Jaroslav Hajtmar > > Here is minimal example: > > > \starttext > > \section[first]{First} > > \subsection[second]{Second} > > \input tufte > > \in{(see section}{ \about[second] at page \at[second])}[second]. > > > \stoptext > > > > > > ------------------------------ > > Message: 3 > Date: Thu, 29 Mar 2012 08:55:17 +0200 > From: Wolfgang Schuster <schuster.wolfgang(a)googlemail.com> > To: hajtmar(a)gyza.cz, mailing list for ConTeXt users > <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <6FE579FE-6E5B-457E-B311-495FD89F5D72(a)googlemail.com> > Content-Type: text/plain; charset=us-ascii > > > Am 29.03.2012 um 08:50 schrieb Jaroslav Hajtmar: > >> Hello all, >> I can not find a way to remove the quotes from the results of the reference link >> Can someone help? > > Use \getreference[title][second] to print the title of the heading. > > Wolfgang > > ------------------------------ > > Message: 4 > Date: Thu, 29 Mar 2012 09:11:34 +0200 > From: Alan BRASLAU <alan.braslau(a)cea.fr> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <20120329091134.66da5b65(a)sole.extra.cea.fr> > Content-Type: text/plain; charset=US-ASCII > > On Thu, 29 Mar 2012 08:50:06 +0200 > Jaroslav Hajtmar <hajtmar(a)gyza.cz> wrote: > >> Hello all, >> I can not find a way to remove the quotes from the results of the >> reference link >> Can someone help? > > On a similar line, concerning syntax (but not references), > the braces grouping keywords get passed on to the pdf properties: > > \setupinteraction [keyword={syntax, braces, commas}] > > Is this a bug or else the incorrect use of braces? > > Alan > > > ------------------------------ > > Message: 5 > Date: Thu, 29 Mar 2012 09:42:48 +0200 > From: Steffen Wolfrum <context(a)st.estfiles.de> > To: hajtmar(a)gyza.cz, mailing list for ConTeXt users > <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <DF21D222-68B7-4BFE-B71E-130C894F12C4(a)st.estfiles.de> > Content-Type: text/plain; charset=us-ascii > > Hi Jaroslav, > > Am 29.03.2012 um 08:50 schrieb Jaroslav Hajtmar: > >> Hello all, >> I can not find a way to remove the quotes from the results of the reference link >> Can someone help? >> >> Thanx >> Jaroslav Hajtmar >> >> Here is minimal example: >> >> >> \starttext >> >> \section[first]{First} >> >> \subsection[second]{Second} >> >> \input tufte >> >> \in{(see section}{ \about[second] at page \at[second])}[second]. >> >> >> \stoptext > > > I use this: > > \setupreferencing[left=,right=,width=] > > Steffen > > > > ------------------------------ > > Message: 6 > Date: Thu, 29 Mar 2012 10:32:12 +0200 > From: Hans Hagen <pragma(a)wxs.nl> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <4F741E0C.6080704(a)wxs.nl> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 29-3-2012 09:11, Alan BRASLAU wrote: >> On Thu, 29 Mar 2012 08:50:06 +0200 >> Jaroslav Hajtmar<hajtmar(a)gyza.cz> wrote: >> >>> Hello all, >>> I can not find a way to remove the quotes from the results of the >>> reference link >>> Can someone help? >> >> On a similar line, concerning syntax (but not references), >> the braces grouping keywords get passed on to the pdf properties: >> >> \setupinteraction [keyword={syntax, braces, commas}] >> >> Is this a bug or else the incorrect use of braces? > > That's weird, as here I get no { } in the properties shown by acrobat > and the xml blob in the pdf has > > <pdf:Keywords>syntax braces commas</pdf:Keywords> > > Hans > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > > ------------------------------ > > Message: 7 > Date: Thu, 29 Mar 2012 10:41:09 +0200 > From: Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: > <CALBOmsaPLGJQ6dk=+LDzL0exc5uSgvf4hm0O0BvP50gJKQ9oVA(a)mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > On Thu, Mar 29, 2012 at 10:32, Hans Hagen wrote: >> On 29-3-2012 09:11, Alan BRASLAU wrote: >>> >>> On a similar line, concerning syntax (but not references), >>> the braces grouping keywords get passed on to the pdf properties: >>> >>> \setupinteraction [keyword={syntax, braces, commas}] >>> >>> Is this a bug or else the incorrect use of braces? >> >> >> That's weird, as here I get no { } in the properties shown by acrobat and >> the xml blob in the pdf has >> >> <pdf:Keywords>syntax braces commas</pdf:Keywords> > > I get the braces when there is a space after braces, for example > > \setupinteraction > [author=me, > title={long title} > ] > > I solved the problem by adding a comma right after the last brace, but > I would also call that "a hint of a tiny buglet somewhere" ;) > > (It also took me some time to realize that one has to use subtitle > instead of subject and keyword instead of keywords.) > > Mojca > > > ------------------------------ > > Message: 8 > Date: Thu, 29 Mar 2012 10:51:41 +0200 > From: Hans Hagen <pragma(a)wxs.nl> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Cc: Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> > Subject: Re: [NTG-context] Removing the quotes from the results of the > reference links > Message-ID: <4F74229D.9070601(a)wxs.nl> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > On 29-3-2012 10:41, Mojca Miklavec wrote: >> On Thu, Mar 29, 2012 at 10:32, Hans Hagen wrote: >>> On 29-3-2012 09:11, Alan BRASLAU wrote: >>>> >>>> On a similar line, concerning syntax (but not references), >>>> the braces grouping keywords get passed on to the pdf properties: >>>> >>>> \setupinteraction [keyword={syntax, braces, commas}] >>>> >>>> Is this a bug or else the incorrect use of braces? >>> >>> >>> That's weird, as here I get no { } in the properties shown by acrobat and >>> the xml blob in the pdf has >>> >>> <pdf:Keywords>syntax braces commas</pdf:Keywords> >> >> I get the braces when there is a space after braces, for example >> >> \setupinteraction >> [author=me, >> title={long title} >> ] >> >> I solved the problem by adding a comma right after the last brace, but >> I would also call that "a hint of a tiny buglet somewhere" ;) > > hm, but such a space before is always valid in key/value assignment or ] > so there is no difference between > > title={long title} > ] > > title={long title} > , > > That has always been the case (ignoring leading an dtrailing spaces of a > key would demand parsing token by token and that's not going to happen > as it would slow down context a lot (so many parsing all over the place) > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > > ------------------------------ > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > > End of ntg-context Digest, Vol 93, Issue 104 > ********************************************

2 1

Rotating externalfigure
by Malte Stien 29 Mar '12

29 Mar '12

Hi all, I am trying to rotate a figure on a page. I believe it should work as follows: \placefigure[left]{Some figure caption}{\externalfigure[some-figure-caption][orientation=90]} ...and the figure does indeed get rotated, but the bounding box appears to be incorrect. The figure ends up being far too small and actually overlays the text above it. I found a couple of posts on the mailing list from years ago regarding this, where people seemed to have related issues. Is there a solution to this? Should this work or am I doing something wrong? I could rotate the figure in the source application, but that is not ideal. Thank you for all your help. Regards, Malte.

2 1

Enumerations: location=serried ignored
by Diane Uschner 28 Mar '12

28 Mar '12

Hello, I noticed that the enumerations environment is behaving oddly when used for theorem environments. In the following minimal example, the option "location=serried" (which should result in an inline heading) is ignored. Furthermore, the number of corrolary is not displayed, instead of being shared with theorem. The general idea of this exaple is from [1] <http://www.ntg.nl/maps/36/09.pdf>. I've not managed to figure out on my own what I'm doing wrong. Any suggestions are appreciated. Diane Context is version 2012.03.13 21:26 MKIV fmt: 2012.3.16 int: english/english. % minimal example \setupenumerations[location=serried,width=broad,distance=0.5em] \defineenumeration[theorem][text=Satz,title=yes] \defineenumeration[corollary][number=theorem,text=Korollar] \starttext \starttheorem[title={Pythagoras Theorem}] The square on the hypotenuse is equal to the sum of the squares on the other two sides. \stoptheorem \startcorrolary The sum of angles of a quadrilateral is 360 degrees. \stopcorrolary \stoptext [1] http://www.ntg.nl/maps/36/09.pdf (Aditya Mahajan's "Theorems in Context")

2 2

nesting commands with optional arguments
by Daniel Schopper 28 Mar '12

28 Mar '12

Dear list, I have a question concerning nesting commands with optional arguments. I'm trying to put a command with an optional argument inside the optional argument of another one … For sure this is just a simple expansion problem but I have no clue how to handle this … Thanks for any hints! Daniel Please consider the following minimal example: \def\one{\dosingleempty\doOne} \def\doOne[#1]{% in 1st: \doifsomethingelse{#1}{#1}{no arg}\par% } \def\two{\dosingleempty\doTwo} \def\doTwo[#1]{% in 2nd: \doifsomethingelse{#1}{#1}{no arg}\par% } \def\three#1{in 3rd: #1\par} \starttext \one\two \blank \one[\three{myArg}] \blank \one[\two[Argument]] \stoptext This is what I get: ! Use of \doOne doesn't match its definition. system > tex > error on line 18 in file testOpt.tex: Use of ... \doifnextoptionalelse ...xt_optional_command_yes { #1}\def \next_optional_com... <argument> \two [Argument \doifsomethingelse #1->\edef \!!stringa {#1 }\ifx \!!stringa \empty \expandaf... \doOne [#1]->in 1st: \doifsomethingelse {#1} {#1}{no arg}\par l.18 \one[\two[Argument] ]

2 3

Re: [NTG-context] Enumerations: location=serried ignored
by dalyoung 28 Mar '12

28 Mar '12

Dear Diane, Recently, I have seen a mail in which "location=" is changed to "alternative=" in mailing list. You will get what you want if you replace 'location' with 'alternative'. For the number of corollary, I have no idea. Experts in this list will tell you what to do. Best regards, Dalyoung

1 0

nice link
by Hans Hagen 28 Mar '12

28 Mar '12

Hi, Here's one for Mari ... (and Luigi's collection of links) http://www.youtube.com/watch?v=YVuggGxeBVk Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

components with enumerations
by Alan Bowen 28 Mar '12

28 Mar '12

The following does not seem to work with the latest MKIV version: \startcomponent \startitemize \item A \item B \item C \stopitemize \stopcomponent The log file shows: ! Use of \strc_itemgroups_item_alone doesn't match its definition. system > tex > error on line 5 in file SimpleTest.tex: Use of ... 1 \startcomponent 2 3 \startitemize 4 \item A 5 >> \item B 6 \item C 7 \stopitemize 8 9 \stopcomponent 10 11 l.5 \item B There is no problem if one uses \starttext…\stoptext (MKIV) or \startcomponent…\stopcomponent (MKII). Is this a bug or have I missed some crucial change in MKIV enumerations? Alan

2 2

table of content not set flushbottom
by Steffen Wolfrum 27 Mar '12

27 Mar '12

Hi Hans, due to the size of my project I cannot send a minimal: but did you remove the TOC's ability to vertically stretch? I did not change any of my styles/environment, and with version 2012.03.13 now the TOC is not set flushbottom anymore. Do I have to add/change something now? Or was that a side-effect that is fixed with a more recent version? Best, Steffen

2 2

Apostrophes not converting to typographical curly apostrophes
by John Magolske 27 Mar '12

27 Mar '12

I'm having difficulty getting straight 0x0027 apostrophes to convert into typographical single-quotes when using a given typescript. In the following example, \quote{single quotes} generates curly typographical single quotes, but the apostrophe comes out as a straight apostrophe in the PDF output: \usetypescriptfile[type-lemonde] \usetypescript[lemonde-1] \setupbodyfont[lemonde,ss,11pt] \starttext Why don't the apostrophes show up as \quotation{curly}? The \quote{single quotes} and \quotation{double quotes} are fine\ldots{} \stoptext The only way I can generate curly apostrophes is by placing 0x2019 characters into the source. However, when I comment out those first three lines, the output displays a curly apostrophe fine in the default font. Am I doing something wrong with how I've set up my typescript? ~/texmf/tex/context/user/type-lemonde.tex looks like this: \starttypescript [serif] [lemonde] \definefontsynonym [LeMondeLivre-Roman] [name:lemondelivrenormalosf] \definefontsynonym [LeMondeLivre-Bold] [name:lemondelivreboldosf] \definefontsynonym [LeMondeLivre-Italic] [name:lemondelivreitalicosf] \definefontsynonym [Serif] [LeMondeLivre-Roman] \definefontsynonym [SerifBold] [LeMondeLivre-Bold] \definefontsynonym [SerifItalic] [LeMondeLivre-Italic] \stoptypescript \starttypescript [sans] [lemonde] \definefontsynonym [LeMondeSans-Roman] [name:lemondesansnormalosf] \definefontsynonym [LeMondeSans-Bold] [name:lemondesansboldosf] \definefontsynonym [LeMondeSans-Italic] [name:lemondesansitalicosf] \definefontsynonym [Sans] [LeMondeSans-Roman] \definefontsynonym [SansBold] [LeMondeSans-Bold] \definefontsynonym [SansItalic] [LeMondeSans-Italic] \stoptypescript \starttypescript [lemonde-1] \definetypeface [lemonde] [rm] [serif] [lemonde] \definetypeface [lemonde] [ss] [sans] [lemonde] \stoptypescript This is using MkIV, recently updated minimals. Thanks for any help, John -- John Magolske http://B79.net/contact

3 3

[***SPAM***] \setbreakpoints[compound] does not work
by Steffen Wolfrum 25 Mar '12

25 Mar '12

Hi, is there a reason why hyphenation of compound "Lwk-Maut" does not work in following example? \showframe \mainlanguage[de] \setbreakpoints[compound] \setnumber[footnote][114] \starttext test {\startfootnote[ftn115] siehe Schlussbericht der zuständigen Bund-Länder-Arbeitsgruppe „Verkehrsverlagerungen info Lkw-Maut“, BT-Dr16/298 v.~13.\,12.\,2005, 2, 3. \stopfootnote}. \stoptext Steffen (vers. 2012.03.13)

2 2

Section, number as a prefix of itemize list
by Jaroslav Hajtmar 25 Mar '12

25 Mar '12

Hello all, can somehow insert the chapter (section, subsection, ...) number as a prefix of itemize list? Thanx Jaroslav Example show exactly what I mean: \section{First section} \startitemize \item aaa \item bbb \item ccc \stopitemize \section{Second section} \startitemize \item ddd \item eee \item fff \stopitemize \section{Third section} \startitemize \item ggg \item hhh \item iii \stopitemize Requested result: 1. First section 1.1 aaa .......... (prefixsectionnumber.itemnumber) 1.2 bbb 1.3 ccc 2. Second section 2.1 ddd 2.2 eee 2.3 fff 3. Third section 3.1 ggg 3.2 hhh 3.3 iii

2 6

\setupnotation[number=no] for linenotes doesn't work in latest beta
by Pablo Rodríguez 25 Mar '12

25 Mar '12

Using beta from yesterday, I have discovered that \setupnotation[number=no] works fine for footnotes, but it doesn't work for linenotes. The sample that shows the issue is the following: \setupnotation[footnote][location=columns,number=no] \definelinenote[dict] \setupnotation[dict][number=no] \starttext \dorecurse{10}{a\footnote{b}\dict{c}} \stoptext Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

\definepagebreak[header, footer] not working when changing matters
by Pablo Rodríguez 25 Mar '12

25 Mar '12

I have discovered that \definepagebreak[header,footer] doesn't right with chapters when changing from frontmatter to bodymatter (and similar divisions). Here you have a sample: \definepagebreak[firstpagebreak][yes,header,footer,right] \setuphead[chapter][page=firstpagebreak] \setuppagenumbering[alternative=doublesided,location={botton}] \starttext \startfrontmatter \dorecurse{4}{\chapter{front}} \stopfrontmatter \startbodymatter \dorecurse{4}{\chapter{body}} \stopbodymatter \startappendices \dorecurse{4}{\chapter{body}} \stopappendices \startbackmatter \dorecurse{4}{\chapter{body}} \stopbackmatter \stoptext Pages previous to chapters with no text should also lack header and footer, but in the example above this doesn't work when text divisions (such as front matter, body matter, appendices and back matter) change. I guess this might be a bug. Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Font goodies color schemes by Unicode number
by Khaled Hosny 25 Mar '12

25 Mar '12

Hi all, Was exploring font goodies and color schemes and so far works great, very nice feature, thanks Hans. Now I've to small questions/feature requests: Can color schemes be defined using Unicode code points, e.g.: { 0x064E, 0x064F } instead of glyph names (e.g. I'd like to have a font independent goody to color Arabic combining marks and no glyph substitution is involved so Unicode code points should work for most fonts). Second question, can it be (ab)used to color a whole font with the same color (can be handy sometimes), e.g. using a special wildcard or something: { "*" }. Regards, Khaled

3 5

Re: [NTG-context] Problem Nesting defineitemgroups
by Malte Stien 25 Mar '12

25 Mar '12

Wolfgang, Thank you for that info. That is unfortunate. Is there any way I can achieve what I need? That is > 1. Foo > + Some bullet item 1, > + Some bullet item 2, > + Some bullet item 3. > 2. Baz Thank you. Malte. On 25/03/2012, at 3:54, ntg-context-request(a)ntg.nl wrote: > ConTeXt uses the type of the item group in the first level also for the inner levels > and handles the inner \startblist as if it was \startnlist.

2 1

xits fots
by salah jubeh 25 Mar '12

25 Mar '12

Hello, I am trying to compile the example provided by khaled hosny https://github.com/khaledhosny/xits-math/blob/master/test-suite/arabic.tex. However this is what I get fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded system > begin file arabic.tex at line 5 Missing character: There is no ف (U+0641) in font lmroman12-regular! I have the latest version of livtex. When I run mtxrun --script fonts --list --all --pattern=xits xits xitsbolditalic xits-bolditalic.otf which is strange because the font xits-math is not listed I have noticed that xits is already installed with livtext, and I have followed the instruction in this page to 'http://wiki.contextgarden.net/Fonts_in_LuaTeX' install the fonts in and I have also installed the fonts in the home_directory/ .fonts I was able to use the xits math with lualatex and it worked fine. luaotfload | load font: font family='xitsmath', subfamily='regular' found: xits-math.otf Thanks in advance

1 0

simple graphics, Metafun vs. ConTeXt
by S Barmeier 25 Mar '12

25 Mar '12

I have leaved through the ConTeXt and MetaFun manuals on the search for examples of graphics resembling the attached file which I created in TikZ. I was wanting to switch to something more native to ConTeXt, but haven't quite found a way of realising it in ConTeXt or MetaFun. Maybe someone would be so kind as to point me to the right section in the manual. All I want is to define text boxes (of a fixed size) to fill them with a background colour and (centred, typeset) text. Do I need MetaFun for that, or should some table/framed text environment in ConTeXt be able to do that? Many thanks, Severin

3 4

footnotes bychapter
by Thomas A. Schmitz 24 Mar '12

24 Mar '12

This works with the November beta, but not the current: \setupfootnotes[way=bychapter, location=page, rule=off] \starttext \startchapter[title=One] Chapter\footnote{Note 1} with two\footnote{Note 2} footnotes. \stopchapter \startchapter[title=Two] Chapter\footnote{Should be Note 1} with two additional\footnote{should be Note 2} footnotes. \stopchapter \stoptext Bug, or has the syntax changed? Thomas

4 7

Referencing a Document within the same Project
by Malte Stien 24 Mar '12

24 Mar '12

Hi all, I am designing a document suite consisting of two dozen or so documents that are all interrelated. I was wondering whether there is a way that I can define a reference point for an entire document within a project and then refer to that from another document, like \document{global-definitions-document} % This is fictitious syntax ...in one document and then refer to that in another document: For global definitions, please see \about{global-definitions-document}. ...or something along those lines. Regards, Malte.

2 1

getting xml instead of context
by Meer, H. van der 24 Mar '12

24 Mar '12

In the processing of incoming xml-data this is typeset as is, not as processed text. Thus for example: with \xmlflush{#1} the incoming data: "<text>its_content</text>" is not typeset as: "its_content", but as: <text>its_content</text>. Substitution of \xmlcontext{#1}{.} for \xmlflush{#1} makes everything go away. Allthough my program is a bit too long to present here, a minimal example is the application of \xmlstripped{#1}{.} instead of \xmlflush{#1}; it has the same result. The output below shows how things looks and clarifies the issue; see the second answer of the multiple choice. How to process these data to neatly typeset material? Hans van der Meer

2 1

new lucida font
by Meer, H. van der 24 Mar '12

24 Mar '12

I just bought the new Lucida font from TUG and installed it in my local texmf under fonts/opentype/bh/lucidaot/ Then I did: mtxrun --generate mtxrun --script font --reload to be sure the new install will be picked up by ConTeXt mkiv. I think I did read somewhere that mkiv will prefer otf above pfb files, if these otfs are present. However, after running \setupbodyfont[lucida,10pt] the log shows the old pfb's used: </Users/hans/TeX/texmf/fonts/type1/yandy/lucida/lbr.pfb> instead of an otf? What could have happended? What am I doing wrong? By the way I do not see the lucida math fonts in the package. Are these missing? Hans van der Meer

3 5

Problem Nesting defineitemgroups
by Malte Stien 24 Mar '12

24 Mar '12

I have the following two definitions for bullet point lists... % Setup bullet point lists \defineitemgroup[blist][before={\blank[1ex]}] \setupitemgroup[blist][1][packed][symbol=1] \setupitemgroup[blist][2][packed][symbol=2] ... and numbered lists % Setup numbered lists \defineitemgroup[nlist][before={\blank[1ex]}] \setupitemgroup[nlist][1][packed][symbol=n, headstyle=bold] \setupitemgroup[nlist][2][packed][symbol=a, headstyle=bold] They generally seem to work well, but when I try to nest one within the other, like so \startnlist \item Foo \startblist \item Some bullet item 1, \item Some bullet item 2, \item Some bullet item 3. \item Assign an appropriate criticality. \stopblist \item Baz \startnlist ...I get unexpected behaviour as follows: 1. Foo a. Some bullet item 1, b. Some bullet item 2, c. Some bullet item 3. 2. Baz I was expecting this instead 1. Foo + Some bullet item 1, + Some bullet item 2, + Some bullet item 3. 2. Baz ...(where "+" denotes the round bullet point). Is this a defect or am I doing something wrong? Regards, Malte.

2 2

how can I use framewidth in calculations
by Thomas A. Schmitz 24 Mar '12

24 Mar '12

Hi all, maybe I'm overlooking something obvious, but...: when I have a figure, I can calculate its width dependent on the page width, and it will adapt: \starttext \externalfigure[cow][width=0.6\textwidth] \stoptext But is there a method for similar calculations inside a frame? Here's what I tried, but it doesn't give the expected result (the image is much smaller than expected): \starttext \framed[width=7cm]{\externalfigure[cow][width=\the\dimexpr0.9\framedparameter{width}\relax]} \stoptext Thanks for any pointers! Thomas

5 7

Formatting Indexed Words Within the Text
by Malte Stien 24 Mar '12

24 Mar '12

Hi all, Is it possible to format indexed words in a particular style within the text more or less automatically. For example, if I write There are some \index[ducks] in the zoo. ...I would like the term "ducks" to appear in small-capitals to indicate the that term can be found in the index. Ideally, I'd like to do that without explicit manual formatting. Is that possible? Thank you, Malte.

5 5

ConTeXt MKIV on-line version?
by Jaroslav Hajtmar 24 Mar '12

24 Mar '12

Hello all, I tested online version of context (mkii) (http://live.contextgarden.net/) for using by training of my few students. Is anywhere online mkiv version of context? I would use luascripts in context macros. Thanx Jaroslav

1 0

Re: [NTG-context] Formatting Indexed Words Within the Text
by Malte Stien 24 Mar '12

24 Mar '12

Hi, I got a few responses for this. Thank you to all of you. I ended up using the code below. Works a treat. And yes, apologies. The square brackets were a typo; of course they should have been curly. Thank you again. Malte. On 24/03/2012, at 0:01, ntg-context-request(a)ntg.nl wrote: > One way is to use your own macro: > > \def\MyIndex#1{\index{#1}{\sc #1}} > \starttext > There are some \MyIndex{ducks} in the zoo. > \stoptext > > By the way, your \index[ducks] didn't work for me the way I thought you wanted; I changed the [] to {} and added the word to the text body. As far as I can tell, \index only adds entries to the index register and not to the text.

1 0

Widgets getting check marks instead of colors when the next one is clicked.
by Mikael P. Sundqvist 23 Mar '12

23 Mar '12

Dear list, 1) Look at the output of this simple document (attached as test.pdf). If I click the first one I get a green square as I want. But when I click the second one the first one loses its color and get a check mark instead (tested on linux and windows). Is there anything I can do to keep the green square when the red is clicked? %%% BEGINNING OF FILE \setupinteraction[state=start,color=darkblue] \setupfield[setup 3] [width=1.2ex, height=1.2ex, rulethickness=1pt, framecolor=darkblue,offset=overlay] \definesymbol [ryes] [{\framed[frame=off,width=2em,height=2em,background=color,backgroundcolor=darkgreen]{ }}] \definesymbol [rno] [] \definesymbol [wyes] [{\framed[frame=off,width=2em,height=2em,background=color,backgroundcolor=darkred]{ }}] \definesymbol [wno] [] \definefield [rcheckme][check] [setup 3] [ryes,rno] [rno] \definefield [wcheckme][check] [setup 3] [wyes,wno] [wno] \starttext \field[rcheckme] Germany is a country in Europe. \field[wcheckme] All germans are men. \goto{Reset}[ResetForm] \stoptext %%% END OF FILE 2) In the example file above I also use ResetForm to clear all the checks. Is there a way to get a button/link such that when I click it all squares are "checked" (in my case colored red or green)? Best regards, Mikael PS If this method is outdated and there is a better one, please do not hesitate to tell me.

2 2

References broken when using more than one component?
by Steffen Fritzsche 23 Mar '12

23 Mar '12

Hi, I've got a deep hierarchy of components, while everything builds fine I have a problem using references. Have a look at the following sample files: reftest.tex: \setuphead[chapter][referenceprefix=+] \starttext \chapter[one]{Chapter One} \section[bla]{Blablabla} See \in{Section}[three:foobar] \chapter[two]{Chapter Two} \section[blubb]{BlubbBlubbBlubb} \subsection{BlubberBlubber} See \in{Section}[one:bla] \component refcomp \stoptext refcomp.tex: \startcomponent refcomp \chapter[three]{Chapter Three} \component refcompsec \stopcomponent refcompsec.tex: \section[foobar]{Foobar Section} See \in{Section}[two:blubb] for more details! \stopcomponent If I move the second component "refcompsec.tex" into the "refcomp.tex" component the reference in chapter one is found. If I translate it as shown using two components the reference in the first chapter is lost. Is this a bug or am I doing something wrong? Cheers, Steffen

3 4

reference \about shall not be shortened
by Steffen Wolfrum 23 Mar '12

23 Mar '12

Hi, how can I avoid shortening of referenced titles? \setupreferencing[left=,right=] \starttext \chapter[ reference={ref123}, title={This is a long titel -- every word is meaningful and shall not be omitted}, marking={Titel}, list={Titel}, bookmark={Titel}] see in “\at[ref123] \about[ref123]”. \stoptext Steffen

2 1

Floating figures – text wrapping and captions alignment
by Honza Hejzl 23 Mar '12

23 Mar '12

Hello ConTeXists, I wrote my questions maybe in a confusing way. It seems two things with floating figures (especially with placing pictures) are maybe broken. 1) It is impossible to achieve proper text wrapping around figure when the GRID is ON. I have tried more suggestions. 2) The second thing is there is no way how to change alignment in captions. \enableregime[utf] \mainlanguage[en] \setuppapersize[A5][A5] \definefloat[figure][figures] \setuplayout[grid=yes] \setupcaption[figure][% align=left, %align=right, style=\ss, distance=2pt,before={\noindent}] \showgrid \starttext \input tufte %\movesidefloat[x=10pt,y=-40pt] %\movesidefloat[3*line] %\hangsidefloat[3] \placefigure[left]{sdf}{\externalfigure[none][height=3cm]} \input tufte \stoptext Any help appreciated. Honza Hejzl

1 0

[***SPAM***] \about without quotes
by Steffen Wolfrum 23 Mar '12

23 Mar '12

Hi, how can I get rid of the quotes around about's output (see below)? \starttext \chapter[ reference={ref123}, title={Titel}, marking={Titel}, list={Titel}, bookmark={Titel}] see in \at[ref123] \about[ref123] (should be “1 Titel”) \stoptext Steffen

1 1

Lettrine misbehaving in beta
by Michael Guravage 23 Mar '12

23 Mar '12

Greetings, If you run the following example with the current beta you will see that the second and subsequent lines of the paragraph are pushed down below the extent of the drop cap. This behavior appeared sometime after 2011.10.24. Can anyone explain what is happening and suggest a solution? \usemodule[lettrine] \showgrid \def\myhook {\definefontsynonym[LettrineFont][eusm10]} \setuplettrine [Lines=5, FontHook={\red\myhook}, Findent=0.2em, Nindent=0.2em, Oversize=1.0, Hang=0.15] \setuplayout [grid=yes] \starttext \lettrine{W}{e thrive} in information||thick worlds because of our marvelous and everyday capacity to select, edit, single out, structure, highlight, group, pair, merge, harmonize, synthesize, focus, organize, condense, reduce, boil down, choose, categorize, catalog, classify, list, abstract, scan, look into, idealize, isolate, discriminate, distinguish, screen, pigeonhole, pick over, sort, integrate, blend, inspect, filter, lump, skip, smooth, chunk, average, approximate, cluster, aggregate, outline, summarize, itemize, review, dip into, flip through, browse, glance into, leaf through, skim, refine, enumerate, glean, synopsize, winnow the wheat from the chaff and separate the sheep from the goats. \stoptext With kind regards, Michael Guravage

4 4

interaction kills hyperlinks
by Steffen Wolfrum 23 Mar '12

23 Mar '12

[as the first posting was labeled spam, I try it once more:] Hi, it's probably a rare case: URL with comma. Just by chance I found that these URL kill hyperlinks when interaction is active: \setupinteraction [state=start] \starttext \goto{\hyphenatedurl{www.spiegel.de/spiegel/0,1518,288433,00.html}}[url(http://www.spiegel.de/spiegel/0,1518,288433,00.html)] \goto{\hyphenatedurl{www.ftd.de/politik/deutschland/1058704515970.html}}[url(http://www.ftd.de/politik/deutschland/1058704515970.html)] \stoptext Strange, isn't? Steffen

2 3

Itemized List Definitions
by Malte Stien 23 Mar '12

23 Mar '12

Hi, Thank you for all your help so far. I do have another question, though. I would like to define different styles for different types of itemized lists. I have defined: % Setup itemised lists \setupitemize[1][packed][symbol=1] \setupitemize[2][packed][symbol=2] for one type and I would like to setup another type where the symbols and the indentation are different. Is there a mechanism for that? Something along the line of \setupitemizedlist[typeA][...] \setupitemizedlist[typeB][...] similar to \definedelimitedtext for example? Regards, Malte.

2 1

Itemize without page break
by Kip Warner 22 Mar '12

22 Mar '12

Hey list, Is there any way to hint to ConTeXt that the contents of a \startitemize \stopitemize pair should try to be all on the same page? -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

9 44