- ntg-context - NTG Mailing Lists

Re: [NTG-context] Where is the documentation of the letter module
by Michael Green 30 May '12

30 May '12

On May 24, 2012, at 3:13 PM, Florian Wobbe wrote: > is there anyone else who knows where the current correspondence docu resides? I tried again to locate it but to no avail. I find the manual in these places. /tex/texmf-modules/doc/context/third/letter https://bitbucket.org/wolfs/correspondence/downloads There is some guidance about what's new in these messages: http://www.ntg.nl/pipermail/ntg-context/2012/064695.html http://www.ntg.nl/pipermail/ntg-context/2012/065039.html

3 5

Is it possible to define a custom imposition schema? (sure it is, but how?)
by Marco Pessotto 30 May '12

30 May '12

Hello there. I'd need a custom imposition schema, just like the 2*4*2, but first the sheets will be folded, then inserted in signatures of 16 pages, and then finally bound. (They said the machine can fold only one sheet). I came up with 3 "solutions" (or 3 hacks, as you wish): 1. psutils/pstops 2. layers 3. hack page-imp.mkiv 1. The first solution would be the faster, but after spending a day on it I gave up, because I have endless issue with cropped pages, paper dimension not correctly set, and I only scratched the surface. I don't know if exists some support for psutils (doesn't look so), but I have the feeling that software is pretty dead. 2. Layers: I'm attaching the code below. Does it seem sensible, or is there a better way to do it? (I'll create a template from that, and will loop over every 16 pages with the usual perl hack). It seems to work, even if visually it looks a bit shifted to right (I can adjust it manually). [An alternate approach could be just various \hbox, but maybe the layer solution is better for absolute positioning] 3. page-imp.mkiv would be the best solution (obviously). I've dug a bit into the code, but I'm in deep waters. I can't understand where the sequence of the pages is defined. the \pusharrangedpageSCHEMA seems just to define the position inside the page, not the sequence of the shipped out page. Also, what are \c_page_marks_nx and \c_page_marks_ny? Any hint about how this machinery works? Thanks Best wishes % start draft \definepapersize[carta][width=320mm,height=440mm] \setuppapersize[carta][carta] \setuplayout [topspace=0pt, backspace=0pt, header=0pt, footer=0pt, margin=0pt, marking=on, width=320mm, height=440mm, location=middle] \setuppagenumbering[alternative=doublesided,location=] \setuprotate[location=depth,rotation=180] % \showframe \starttext % page one \definelayer[PageLayer1][position=no] \setuplayer [PageLayer] [preset=topleft, height=\paperheight,width=\paperwidth] \setlayer[PageLayer1][x=0mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=13] } } \setlayer[PageLayer1][x=160mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=4] } } \setlayer[PageLayer1][x=0mm,y=220mm]{ \externalfigure[libretto.pdf][page=16] } \setlayer[PageLayer1][x=160mm,y=220mm]{ \externalfigure[libretto.pdf][page=1] } \placelayer[PageLayer1] %%% page 2 \definelayer[PageLayer2][position=no] \setuplayer [PageLayer] [preset=topleft, option=test, height=\paperheight,width=\paperwidth] \setlayer[PageLayer2][x=0mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=3] } } \setlayer[PageLayer2][x=160mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=14] } } \setlayer[PageLayer2][x=0mm,y=220mm]{ \externalfigure[libretto.pdf][page=2] } \setlayer[PageLayer2][x=160mm,y=220mm]{ \externalfigure[libretto.pdf][page=15] } \placelayer[PageLayer2] %page 3 \definelayer[PageLayer3][position=no] \setuplayer [PageLayer] [preset=topleft, option=test, height=\paperheight,width=\paperwidth] \setlayer[PageLayer3][x=0mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=9] } } \setlayer[PageLayer3][x=160mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=8] } } \setlayer[PageLayer3][x=0mm,y=220mm]{ \externalfigure[libretto.pdf][page=12] } \setlayer[PageLayer3][x=160mm,y=220mm]{ \externalfigure[libretto.pdf][page=5] } \placelayer[PageLayer3] % page 4 \definelayer[PageLayer4][position=no] \setuplayer [PageLayer] [preset=topleft, option=test, height=\paperheight,width=\paperwidth] \setlayer[PageLayer4][x=0mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=7] } } \setlayer[PageLayer4][x=160mm,y=0mm]{ \rotate{ \externalfigure[libretto.pdf][page=10] } } \setlayer[PageLayer4][x=0mm,y=220mm]{ \externalfigure[libretto.pdf][page=6] } \setlayer[PageLayer4][x=160mm,y=220mm]{ \externalfigure[libretto.pdf][page=11] } \placelayer[PageLayer4] \stoptext -- Marco

3 7

Spacing for {\cal P} in XITS
by Janne Junnila 29 May '12

29 May '12

Hi, I just noticed that the spacing after ${\cal P}$ looks a bit too tight (non-existent?) while using XITS fonts. \setupbodyfont[xits] \starttext The spacing of ${\cal P}$ looks like this. \stoptext I'm not sure if the other calligraphic letters are totally fine either, but this one caught my eye. I suppose it's a font issue. Any ideas? Best regards, Janne Junnila

4 7

Apology
by yuji sakai 29 May '12

29 May '12

Good day! I would like to apologize for whatever trouble my earlier post caused the message archive system. Rest assured that no ill intention was behind that. Honestly, I haven't been posting anything for quite a while now, and I have already forgotten how to... At least in a proper way. I was caught up in the middle of something earlier as I was trying to look for a solution to my problem when I posted my query. It was only after Mojca called my attention just now that I noticed that I have not deleted the rest of the unrelated posts in the bulletin that I used to reach the mailing list. Only now did I realize what a mess that has caused. I am still learning the ropes in using ConTeXt MKIV. But instead of asking questions about the things that I needed done, I have done my best to search for the answers myself. Only when I feel (at the time) that my search has been futile do I come to this mailing list for help... And that is as a last resort. To Aditya, thank you very much for your very prompt reply. I already knew the unicode for the recipe sign prior to posting my inquiry, and was hoping there would be another way to do it. At the time of posting, I was having problems typesetting unicode characters in MKIV but soon figured that out by the time I received Aditya's response. But nonetheless, I am grateful for Aditya's help. Cheating, I believe, has a connotation of one bypassing the norms to gain undue advantage over others. To that, I refuse to admit that what I did earlier was cheating. As I have said, I had no intention of disrupting this message board. It was a careless mistake on my part. Anyway, thank you all for your help. Joel

2 1

Math fonts in TeXLive 2012
by Tim Steenvoorden 29 May '12

29 May '12

Hi all, I'm testing some math fonts with ConTeXt in the current TeXLive pretest (2012.05.25 18:21). I'm not sure which are supposed to work with MKIV, but I found typescripts for the following ones in type-imp-*.mkiv which are also included in TeXLive: * Latin Modern * Euler * Asana * Palatino (px) * Times (tx) * Utopia (mathdesign) * Charter (mathdesign) * Garamond (mathdesign) * Antykwa Torunska * Iwona * Kurier * Xits Compiling the example in the attachment I found than Euler and all Mathdesign derivatives are not working. Does anyone know if Millenial will be supported by TeXLive 2012? Also MKII supported Fourier (for Utopia and Schoolbook). What is the status of this font in MKIV? Cheers, Tim P.S. Euler is working in the 2012.05.26 16:40 Standalone version.

8 13

pushing margintext up
by Andy Thomas 29 May '12

29 May '12

Hello all, is there a way for margintext to 'respect' the lower border of the page and push the margintext up, pushing other margintexts upwards while doing so? example: \definepapersize[wissenschaft][width=170mm,height=240mm] \setuppapersize [wissenschaft] \setuplayout [topspace=40pt, header=0pt, headerdistance=0pt, backspace=42pt, leftmargin=0pt, width=280pt, height=560pt, rightmargindistance=20pt, rightmargin=100pt, footer=0pt] \setuppagenumbering[alternative=doublesided] \setupmargindata [margintext] [location=outer, width=100pt, align=flushouter] \starttext \showframe \input tufte \input tufte \input tufte\margintext{This is too low, if there are many words in this note.} \stoptext Kind of hard to explain, I hope the example makes everything clear. Andy

3 6

Small integral signes with Palatino
by Tim Steenvoorden 29 May '12

29 May '12

Dear list, Have some problems with the latest beta. I get small integral signs when using Palatino math (see minimal example in attachment). Any clou? ConTeXt version: 2012.05.18 23:50, Mac OS X 10.6.8 Regards, Tim

8 24

How to typeset recipe symbol for a doctor's prescription pad
by yuji sakai 29 May '12

29 May '12

Good day! Been trying to typeset a prescription pad template for a doctor but am stumped at the recipe symbol. Searched the internet for help but I just couldn't find it. Hope someone who has tried using this symbol in MKIV can help me with this one. Thanks. Joel Mendoza ------------------------------ *From:* "ntg-context-request(a)ntg.nl" <ntg-context-request(a)ntg.nl> *To:* "ntg-context(a)ntg.nl" <ntg-context(a)ntg.nl> *Sent:* May 29, 2012 3:27 AM *Subject:* ntg-context Digest, Vol 95, Issue 102 Send ntg-context mailing list submissions to ntg-context(a)ntg.nl To subscribe or unsubscribe via the World Wide Web, visit http://www.ntg.nl/mailman/listinfo/ntg-context or, via email, send a message with subject or body 'help' to ntg-context-request(a)ntg.nl You can reach the person managing the list at ntg-context-owner(a)ntg.nl When replying, please edit your Subject line so it is more specific than "Re: Contents of ntg-context digest..." Today's Topics: 1. Re: thelabel problem (luigi scarso) 2. Re: Missing "missing character" warning (Hans Hagen) 3. Re: thelabel problem (luigi scarso) 4. Re: thelabel problem (Alfredo Catalina) 5. Re: Missing "missing character" warning (Hans Hagen) 6. Re: \footnote numbering starting with 3 (Marco Pessotto) 7. Re: Math fonts in TeXLive 2012 (Tim Steenvoorden) ---------------------------------------------------------------------- Message: 1 Date: Mon, 28 May 2012 21:06:01 +0200 From: luigi scarso To: mailing list for ConTeXt users Subject: Re: [NTG-context] thelabel problem Message-ID: Content-Type: text/plain; charset=UTF-8 On Mon, May 28, 2012 at 8:54 PM, Alfredo Catalina wrote: > Contents of the log file: > > (kk.tex > ConTeXt? ver: 2011.05.18 18:04 MKIV? fmt: 2012.5.28? int: english/english > system????????? > cont-new.mkiv loaded Ah --- are you running mkiv ? It's ok with mkii, ie mtxrun texexec kk.tex I need to check with mkiv, ie context kk.tex -- luigi ------------------------------ Message: 2 Date: Mon, 28 May 2012 21:15:47 +0200 From: Hans Hagen To: mailing list for ConTeXt users Cc: Taco Hoekwater , Mojca Miklavec Subject: Re: [NTG-context] Missing "missing character" warning Message-ID: <4FC3CEE3.4070801(a)wxs.nl> Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 28-5-2012 20:51, Mojca Miklavec wrote: > On Mon, May 28, 2012 at 7:00 PM, Hans Hagen wrote: >> On 28-5-2012 18:26, Marco Pessotto wrote: >> >>> After a lot of mumbling by myself... Is there a reason not to have the >>> fonts.missing tracker enabled by default? Performance hit? >> >> indeed > > Still, given the large amount of data that gets printed during a > compilation (it is basically impossible to figure out if something > goes wrong without carefully looking at the log), I would also support > the idea to print missing characters by default. > > I'm also contemplating a different idea (after TL): wouldn't it be > nice if ConTeXt (luatex) would print warnings (missing image, missing > module, missing character, ...) in colour (if that's supported), to > make it clearly stand out from the rest? > > clang and CMake use that regularly for example. > > Mojca > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ------------------------------ Message: 3 Date: Mon, 28 May 2012 21:16:25 +0200 From: luigi scarso To: mailing list for ConTeXt users Subject: Re: [NTG-context] thelabel problem Message-ID: Content-Type: text/plain; charset=UTF-8 On Mon, May 28, 2012 at 9:06 PM, luigi scarso wrote: > Ah --- are you running mkiv ? > It's ok with mkii, ie > mtxrun texexec kk.tex > > I need to check with mkiv, ie > context kk.tex mkiv has draw externalfigure while mkii has externalfigure This is ok \starttext Testing \startuseMPgraphic{gh} picture pic; numeric u; u:=1; textX:=87.51u; textY:=96.31u; pic:=thelabel.urt(btex {Test} etex scaled 1.00,(0,0)); draw pic shifted (textX, textY); draw externalfigure "mill.png" xscaled 80.13u yscaled 60.09u shifted (69.85u,20.30u) ; \stopuseMPgraphic \useMPgraphic{gh} \stoptext Also search "externalfigure" vs. "draw externalfigure" in metafun in this ml -- luigi ------------------------------ Message: 4 Date: Mon, 28 May 2012 21:20:03 +0200 From: Alfredo Catalina To: ntg-context(a)ntg.nl Subject: Re: [NTG-context] thelabel problem Message-ID: Content-Type: text/plain; charset="iso-8859-1" This is what I get with "mtxrun texexec kk.tex" This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/W32TeX) (format=cont-en 2012.5.28) 28 MAY 2012 21:18 entering extended mode \write18 enabled. (c:/context/tex/texmf-context/web2c/natural.tcx) **kk.tex (./kk.tex ConTeXt ver: 2012.05.26 16:40 MKII fmt: 2012.5.28 int: english/english system : cont-new.mkii loaded (c:/context/tex/texmf-context/tex/context/base/cont-new.mkii FatalError : Your format does not match the base files! FormatVersion : 2012.05.26 16:40 MKII FilesVersion : 2011.05.18 18:04 ) ) Here is how much of TeX's memory you used: 47 strings out of 255946 829 string characters out of 1273077 2595900 words of memory out of 4000000 41195 multiletter control sequences out of 15000+100000 7 words of font info for 0 fonts, out of 2000000 for 5000 397 hyphenation exceptions out of 8191 20i,0n,15p,81b,471s stack positions out of 10000i,500n,10000p,4000000b,50000s No pages of output.

3 2

Re: [NTG-context] thelabel problem
by Alfredo Catalina 28 May '12

28 May '12

Yes!!! It works!! Now I can use both commands and it works! I very much appreciate your support. Thanks Luigi! On Mon, May 28, 2012 at 10:20 PM, luigi scarso <luigi.scarso(a)gmail.com>wrote: > On Mon, May 28, 2012 at 9:20 PM, Alfredo Catalina > <alfredo.catalina(a)gmail.com> wrote: > > This is what I get with "mtxrun texexec kk.tex" > > > > This is pdfTeX, Version 3.1415926-2.4-1.40.13 (TeX Live 2012/W32TeX) > > (format=cont-en 2012.5.28) 28 MAY 2012 21:18 > > entering extended mode > > \write18 enabled. > > (c:/context/tex/texmf-context/web2c/natural.tcx) > > **kk.tex > > (./kk.tex > > ConTeXt ver: 2012.05.26 16:40 MKII fmt: 2012.5.28 int: > english/english > > system : cont-new.mkii loaded > > (c:/context/tex/texmf-context/tex/context/base/cont-new.mkii > > FatalError : Your format does not match the base files! > > FormatVersion : 2012.05.26 16:40 MKII > > FilesVersion : 2011.05.18 18:04 > > Hm, try > mtxrun texexec --make > and > context --make > > Both are ok at my end. > > -- > luigi >

1 0

problem with cow font
by Peter Münster 28 May '12

28 May '12

Hi, About one year ago, the following example worked fine, but with the latest beta, the text is no more centred: --8<---------------cut here---------------start------------->8--- \setupbodyfont[cow] \starttext \framed[height=1cm, align=lohi]{bla\par bla} \stoptext --8<---------------cut here---------------end--------------->8--- Workaround: "\vskip-3.8ex" -- Peter

4 4

ConTeXt MKIV 2012.05.22 and \footnote
by Alan Bowen 28 May '12

28 May '12

The latest ConTeXt MKIV (standalone) does not produce footnotes. \startcomponent Stuff\footnote{a note.} \stopcomponent This will show “Stuff” with a footnote call but no footnote appears at the bottom of the page. All is as it should be with MKII. Alan

5 10

Missing "missing character" warning
by Marco Pessotto 28 May '12

28 May '12

Hello all. Reading the manual “Fonts in ConTeXt” I found the following statement (p.97): “In both cases we end up with a message in the log file and a resulting file with missing data”. [When the font doesn't provide a glyph]. Now, the only case when the warning is issued is using mkii with xetex (texexec -xtx), not with mkiv. (Unsurprisingly, the file with missing data is always there :-) Minimal example: %% start \mainlanguage[hr] \starttext Ja sam sȃm, i sȃm sam došao da izvršim pravdu. \stoptext %% stop The name of the char is: LATIN SMALL LETTER A WITH INVERTED BREVE (0x0203) So: $ context prova.tex $ grep -i -E '(warn|miss)' prova.* [ match nothing ] $ texexec --xtx prova.tex $ grep -i -E '(warn|miss)' prova.* prova.log:Missing character: There is no ȃ in font [lmroman12-regular]:+liga;+kern;mappi prova.log:Missing character: There is no ȃ in font [lmroman12-regular]:+liga;+kern;mappi It's not a regression, since the behaviour is the same with the last year ConTeXt. Best wishes -- Marco

4 12

Re: [NTG-context] thelabel problem
by Alfredo Catalina 28 May '12

28 May '12

I checked that I have shell_escape = t shell_escape.context = t shell_escape_commands.context = mtxrun,luatools,texmfstart,texexec,mpost in C:\context\tex\texmf\web2c\texmf.cnf Please find attached the file log (kk.log). Thanks in advance.

2 4

Re: [NTG-context] thelabel problem
by Alfredo Catalina 28 May '12

28 May '12

Thank you. I check it, and you are right. I forgot to include the definitions when I cut and paste that part of the code. I thought the problem was related to the btex command, but it's not. The first line is: u=1.000mm; linecap:=butt; linejoin:=mitered; path pp; picture pic; labeloffset:=0; I compared it with your code. The "numeric u;" definition is missing in my file. I have included it and now it works!! It's really weird since I compiled it in 2009 and it worked as is. I still have the pdf output file...?? Finally I have a problem in this line: externalfigure "aciddrops1.png" xscaled 80.13u yscaled 60.09u shifted (69.85u,20.30u) ; Then I got: terminal: >> picture ! Isolated expression. <to be read again> ; <*> ...3u yscaled 60.09u shifted (69.85u,20.30u) ; ; . system > tex > error on line 99 in file kk2.tex: terminal: >> picture ! Isolated expression. <to be read again> ; <*> ...3u yscaled 60.09u shifted (69.85u,20.30u) ; ; ... 89 fill pp--cycle withcolor (0.000,0.000,0.000); 90 pp:=(150.24u,73.96u)--(152.93u,72.91u)--(153.10u,74.30u)--(150.24u,73.96u); 91 draw pp--cycle withpen pencircle scaled 0.30mm withcolor (0.000,0.000,0.000); 92 93 setbounds currentpicture to (67.85u,18.30u)--(197.56u,18.30u)--(197.56u,102.23u)--(67.85u,102.23u)--cycle; 94 95 externalfigure "aciddrops1.png" xscaled 80.13u yscaled 60.09u shifted (69.85u,20.30u) ; 96 97 \stopuseMPgraphic 98 99 >> \useMPgraphic{gh} 100 101 \stoptext 102 <inserted text> ...re.mp ; fi ; ;;;;]===], false)} \processMPgraphic ...e ;\!!es , \MPaskedfigure )}} \egroup \placeMPgraphic \d... \handleuseMPgraphic ...hics \processMPgraphic {#3} \endgroup \douseMPgraphic ...{\@@MPG \currentMPgraphicname } \empty \endMPgraphicgroup <to be read again> l.99 \useMPgraphic{gh}

2 3

Re: [NTG-context] thelabel problem
by Alfredo Catalina 28 May '12

28 May '12

I tried your code but I got an error. No idea of what is happening. Thanks. -------------- ! terminal: >> picture ! Isolated expression. <to be read again> ; <*> ...3u yscaled 60.09u shifted (69.85u,20.30u) ; ; . system > tex > error on line 17 in file kk.tex: terminal: >> picture ! Isolated expression. <to be read again> ; <*> ...3u yscaled 60.09u shifted (69.85u,20.30u) ; ; ... 7 numeric u; 8 u:=1; 9 textX:=87.51u; 10 textY:=96.31u; 11 pic:=thelabel.urt(btex {Test} etex scaled 1.00,(0,0)); 12 draw pic shifted (textX, textY); 13 externalfigure "mill.png" xscaled 80.13u yscaled 60.09u shifted 14 (69.85u,20.30u) ; 15 \stopuseMPgraphic 16 17 >> \useMPgraphic{gh} 18 19 \stoptext 20 <inserted text> ...re.mp ; fi ; ;;;;]===], false)} \processMPgraphic ...e ;\!!es , \MPaskedfigure )}} \egroup \placeMPgraphic \d... \handleuseMPgraphic ...hics \processMPgraphic {#3} \endgroup \douseMPgraphic ...{\@@MPG \currentMPgraphicname } \empty \endMPgraphicgroup <to be read again> l.17 \useMPgraphic{gh}

1 0

Link to next chapter
by Aditya Mahajan 28 May '12

28 May '12

It is possible to get the title (either marking or list text) and a link to the next chapter in the footer? Such a style is used in Kindle and I'd like to recreate it. Minimum non-working example \setupfootertexts[][\setups{chapter:next}] \startsetups chapter:next % This does not give me the marking of the next chapter \getmarking[chapter][next] % I'd also like to get a hyperlink to it \stopsetups \starttext \dorecurse{3}{\chapter{Chapter \recurselevel} \input knuth \relax } \stoptext Aditya

1 0

Beta breaks synonyms
by Marco 28 May '12

28 May '12

Hi Today's beta breaks synonyms. The first run is fine, the second one fails with an ! Undefined control sequence. Example: \abbreviation {LOREM} {Lorem Ipsum} \starttext \placelistofabbreviations \LOREM\infull{LOREM} \stoptext Marco

4 5

thelabel problem
by Alfredo Catalina 28 May '12

28 May '12

I installed ConTeXt in 2009 in my laptop and wrote some documents. Now I have installed ConTeXt in other computer and tried to process some of those documents but it doesn't work. It looks that there is something wrong with Metapost/Metafun. I have tried a simple program like \starttext Testing \startuseMPgraphic{gh} draw thelabel.rt("the right way",a) withcolor .625red ; \stopuseMPgraphic \useMPgraphic{gh} \stoptext Then I get: system > begin file kk2.tex at line 1 metapost > initializing instance 'metafun' using format 'metafun' metapost > loading 'metafun.mp' (experimental metapost version two) ! terminal: >> a >> (3,0) ! Not implemented: (unknown numeric)+(pair). <to be read again> - thelabel->...((EXPR4)+labeloffset*laboff(SUFFIX2)- (labxf(SUFFIX2)*lrcorner.p... <*> draw thelabel.rt("the right way",a) withcolor .625red ; ; . system > tex > error on line 10 in file kk2.tex: terminal: >> a >> (3,0) ! Not implemented: (unknown numeric)+(pair). <to be read again> - thelabel->...((EXPR4)+labeloffset*laboff(SUFFIX2)- (labxf(SUFFIX2)*lrcorner.p... <*> draw thelabel.rt("the right way",a) withcolor .625red ; ; Any ideas? Thank you.

3 4

Use figures without file extension
by Aditya Mahajan 27 May '12

27 May '12

Currently, ConTeXt only recognizes the type of figure from the file extension. If a filename does not have an extension, \externalfigure fails. For example: $ cp `luatools hacker.jpg` something Then, \starttext \externalfigure[something] \stoptext fails. However, if I set \externalfigure[something][method=jpg] the figure loads correctly. But what is surprising is that if I set \externalfigure[something][method=pdf] then also the figure loads correctly! This means that context has the code to recognize the figure type (even without the extension), but that fails when method is not set. Setting a global \setupexternalfigures[method=pdf] does not work because method is reset to empty by \resetfiguresettings. Any ideas on how to load an external figure without a file extension and not specifying the figure type by hand? Aditya

4 8

indexing puzzle
by Alan Bowen 26 May '12

26 May '12

I have been trying to index the passages cited in a book and would be grateful for some tactical advice. There are several works by a single author, and it is customary to cite each text by page and line number, as in 1253.12 (page 1253, line12), for example. I have a sort key for each work. But now I need a way to get the entry 1253.7 (page 1253, line 7) before the entry 1253.12 (page 1253, line 12). \[Passage[AuthorText]{Author+Text+1253.07}1253.7 or \[Passage[AuthorText]{Author+Text+1253.07}1253. 7 would work, but it is really better to have the index entry as “1253.7” rather than as “1253.07” or “1253. 7” I have experimented with different sort keys—e.g., AuthorText125307—and can generate an index with the 1235.7 and so on in the proper place and form, say, before 1253.12. But then the problem is that I also get entire sequences of entries out of order (485.19, 485.21 before 477.31, and so on). Very puzzling. (Restoring the sort key AuthorText removes the latter problems but then leaves 1253.7 in the wrong place.) If anyone has experience with this or just some ideas for a solution, their suggestions will be most welcome. I am using the MKII in the latest ConTeXt standalone. Alan

3 6

Simple backgrounds not working
by Aditya Mahajan 26 May '12

26 May '12

Hi, Simple backgrounds are not working with the latest beta. The following has no background color. \setupbackground [background=color, backgroundcolor=red] \starttext \startbackground ABC \stopbackground \stoptext Aditya

3 4

xmlmapvalue
by Meer, H. van der 25 May '12

25 May '12

Is there something local in \xmlmapvalue? Because \xmlmapvalue in the current tree (with \xmlsetup{#1}{command}) makes \xmlvalue find the mapping, but having it executed on a different tree (with \xmlprocessbuffer{root}{buffer}{}) makes it unreachable and \xmlvalue fails. How to solve this? Hans van der Meer

2 1

\typefile does not obey global path settings
by Marco 25 May '12

25 May '12

Hi, the \typefile command does not obey the \usepath setting any more. Older versions did (before beta 2011.07.13 20:14). Example: % test.tex \usepath [code] \starttext Here is some source code: \typefile{somefile} \stoptext % code/somefile This should be printed. Marco

2 3

Linenumbering
by Willi Egger 25 May '12

25 May '12

Hi all, may be i am mistaken, but I can't get line numbering to show in the beta of yesterday afternoon. \starttext \setuplinenumbering[step=5,location=intext] \startlines Een nieuwe lente en een nieuw geluid: Ik wil dat dit lied klinkt als het gefluit, Dat ik vaak hoorde voor een zomernacht, In een oud stadje, langs de watergracht --- In huis was 't donker, maar de stille straat Vergaarde schemer, aan de lucht blonk laat Nog licht, er viel een gouden blanke schijn Over de gevels van mijn raamkozijn. \stoplines \stoptext It compiles ok, no error messages. Willi

3 5

Thank you
by Henning Hraban Ramm 25 May '12

25 May '12

I’d like to thank you wizards and workers for fixing the bugs that bothered me with my current book project just in time! (I’ll never update any more ;---) It’s sometimes a bit difficult to get a version of ConTeXt that supports all needed features at the same time... Can we do anything WRT quality assurance? Greetlings, Hraban

4 3

Citations in a frontmatter fail when placed in a component
by Marco 25 May '12

25 May '12

Hi, When a \cite command is placed in a frontmatter or bodymatter it prints [[error 2]] as citation and no bibliography is created. This only occurs when the \cite command is called from another component. \cite calls from within the same file work, even inside a frontmatter. Example: % file product.tex \startproduct product \startpublication[k=me, t=manual, a=Hoekwater, y=2006, s=TH2006, n=1, u=http://contextgarden.net/Bibliography] \author{Taco}[T.]{}{Hoekwater} \title{\CONTEXT\ Publication Module, The user documententation} \pubyear{2006} \note{In case you didn’t know: it’s the document you are reading now} \pages{14} \stoppublication % comment out the frontmatter and it works \startfrontmatter \component component % this one works % \cite[me] \stopfrontmatter \placepublications [criterium=text] \stopproduct % file component.tex \startcomponent component cite: \cite[me] \stopcomponent Marco

3 5

updated binaries, please keep testing TL 2012
by Mojca Miklavec 25 May '12

25 May '12

Hello, the majority of binaries in ConTeXt distribution have been updated from TeX Live 2012 now (missing are only linux-64, linux-ppc by Thomas S., and possibly some from windows). (Builders might want to be careful a bit, I'm afraid that simply running the script would downgrade luatex because I increased the version in binaries, while sources are still at 0.70.1, so please don't try to build anything, except for Thomas who might want to test building the TL ;) Mac OS X Tiger is not supported any more. If there are any objections, you can help me figure out why building fails, else we are done with 10.4 forever. (We got 8 visitors of 10.4 on website [minimals.contextgarden.net] since January this year. I have no way to check if any tiger user actually uses the minimals or not. We still have an impressive number of PowerPC users.) In the morning you should also see an update of ConTeXt in TeX Live 2012, matching the latest beta from yesterday. Please post feedback or any issues that you might experience. Mojca

4 12

TABLE with split=repeat and headings
by Andreas Schneider 25 May '12

25 May '12

Hello, I have several natural tables with the split=repeat option set. Those tables are directly after a subsubsubject. Every now and then it happens, that the heading stays on the previous page (as last line) and the table slips to the next page. Without split=repeat it correctly takes the header to the next page too. Can I consider this a bug or am I doing something wrong? The attached example demonstrates this problem. Testet with ConTeXt ver: 2012.01.02 21:59 MKIV fmt: 2012.1.24 int: english/english and 201200310 13:15 MKIV -- Best Regards, Andreas

2 3

References to itemize items
by Rogers, Michael K 25 May '12

25 May '12

Hi, Under the beta version (ConTeXt ver: 2012.05.14 16:00 MKIV fmt: 2012.5.16), item numbers in references (with \in[..]) are not converted automatically in the way they used to be done under last year's "current" ConTeXt. I have macros that do something like below that no longer work. The level two items are converted to letters, but references to them appear as unconverted numbers. Is there a way to convert them? \setupitemgroup[itemize][1][n] \setupitemgroup[itemize][2][a] \starttext \startitemize %level 1 \item One \startitemize %level 2 \item AA \item[BB] BB \stopitemize\stopitemize In BB = \in[BB] (used to print b, not 2).... \stoptext Thanks, Michael ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments).

2 3

FontForge does not support your encoding (utf8) (was: ... please keep testing TL 2012)
by Mojca Miklavec 24 May '12

24 May '12

On Thu, May 24, 2012 at 10:15 PM, Philipp Gesang wrote: > > Ok, will try again later. You may try again in the morning when the packages will be updated. >> The file seems to be present here. > > For me too, it’s even in the database. But still the format can’t > be generated. > > Here’s a paste of the log: http://pastie.org/3962742; my mail > from earlier today is still being held back by mailman. Totally weird. Let's wait until tomorrow and see then. But the best of all is the following line: FontForge does not support your encoding (utf8), it will pretend the local encoding is latin1 I realized that it might not even be the first time for me to see that message: http://www.ntg.nl/pipermail/ntg-context/2011/058800.html but it is totally puzzling. Now I realized that if I replace LC_ALL=sl_SI.UTF-8 with LC_ALL=sl_SI.utf8 in my environment I get that message as well (but I have no clue whether it influences anything). Mojca

3 4

Where is the documentation of the letter module
by Florian Wobbe 24 May '12

24 May '12

Wolfgang: I have an old letter that typesets fine with beta 2011.11.29 23:11 but that fails with anything newer than that. I get lots of "Undefined control sequence" and \textwidth seems to expand to something without a unit: "Illegal unit of measure (pt inserted)". Anyway, I guess there are big changes so I'd like to go through the documentation again. However, [1] seems to be gone now and the pdf in [2] is absent too. Cheers, Florian [1] texmf-context/tex/context/third/letter/base/t-correspondence.tex [2] http://dl.contextgarden.net/modules/t-letter/doc/context/third/letter/

1 1

\definecolor and TikZ
by Tim Steenvoorden 24 May '12

24 May '12

Hi again, The bug about \definecolor and TikZ is back again in the latest beta. The minimal example in the attachment worked in version 2012.05.14 (both MKII and MKIV). Regards, Tim

4 7

Align caption text separately from figure label
by John Dyreby 24 May '12

24 May '12

Hello, I spent a few hours googling and trying random things but am not able to get figure captions looking the way I want them. Basically, I'd like long captions to be left aligned as a framed chunk of text, similar to this post here: http://tex.stackexchange.com/questions/8739/multiline-figure-caption-center… Or if this formatting works... How it currently looks: Figure 1 This is a caption that extends to multiple lines. What I'm trying to get: Figure 1 This is also a caption that extends to multiple lines. I was able to produce what I wanted with an aligned \framed command, but the width of the caption and the width of the framed box had to be set for each figure, which is less than ideal. I'm hoping that there is a way to adjust the amount of indent for the text of the caption so that I can 'push' all the lines after the first one to line up with it? Thanks much, John

2 2

MkII in standalone distribution broken?
by Henning Hraban Ramm 24 May '12

24 May '12

Just a short notice, can’t debug ATM: Since yesterday evening, ConTeXt doesn’t seem to be able to build MkII formats (via the first-setup script on OSX 10.5.8 Intel), it claims, cont-nl.mkii, cont-en.mkii, metafun would be missing. As far as I saw, MkIV builds. Greetlings, Hraban

4 5

cross-references again
by Alan Bowen 24 May '12

24 May '12

When \startcomponent \setupcolors[state=start] \setupinteraction[state=start] \reference[knuth]{} \input{knuth} \page \goto{see knuth}[knuth] see knuth quotation on page \at[knuth] \stopcomponent is compiled with the latest version of Context (2012.05.20, MKIV), the links show as expected but do not actually lead to the the page referenced. This functionality is critical to my journal so any suggestions or fixes would be greatly appreciated. Alan

2 1

Layers for alternating page elements?
by Tim Sheasby 23 May '12

23 May '12

Have just started working with TeX/ConTeXt after years with Adobe InDesign. Want to make an alternating page layout with one column only but a large outer margin. This I have managed to achieve but in addition I want running footers in the outer margin flush with the bottom of the text and also want a vertical .5pt rule between the text area and the outside margin area. Can a layer be placed in the footer or header to achieve this? Layout would have to alternate from left to right page. I think this means a different layer for each side? The right page must also have a logo at the top of the outside margin. Page setup is as follows: \setuppapersize [A4][A4] \setuplayout[ width=10cm,backspace=2.5cm,rightmargin=5.8cm, rightmarginspace=1cm,topspace=1.5cm,header=0cm,lines=42] Many thanks

2 1

Local texmf directory in TeXLive 2012
by Marco Pessotto 23 May '12

23 May '12

Going ahead with the TeXlive testing, I found the following problem. Probably I'm doing something wrong, but as far as I can see, the texmf-local directory is ignored. Best wishes. [09:35] melmoth@universe:~/progetti/debug$ which context /home/melmoth/progetti/texlive2012/bin/i386-linux/context [09:35] melmoth@universe:~/progetti/debug$ mktexlsr mktexlsr: Updating /media/data/melmoth/progetti/texlive2012/texmf/ls-R... mktexlsr: Updating /media/data/melmoth/progetti/texlive2012/texmf-config/ls-R... mktexlsr: Updating /media/data/melmoth/progetti/texlive2012/texmf-dist/ls-R... mktexlsr: Updating /media/data/melmoth/progetti/texlive2012/texmf-local/ls-R... mktexlsr: Updating /media/data/melmoth/progetti/texlive2012/texmf-var/ls-R... mktexlsr: Done. [09:36] melmoth@universe:~/progetti/debug$ grep -i -E '(leag|chari)' /media/data/melmoth/progetti/texlive2012/texmf-local/ls-R charis leaguegothic ./fonts/charis: CharisSIL-BI.ttf CharisSIL-B.ttf CharisSIL-I.ttf CharisSIL-R.ttf ./fonts/leaguegothic: League_Gothic.otf [09:36] melmoth@universe:~/progetti/debug$ mtxrun --script fonts --reload fonts | names | warnings are disabled (tracker 'fonts.warnings') fonts | names | identifying tree font files with suffix otf fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for otf files fonts | names | 6 entries found, 0 otf files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for otf files fonts | names | 73615 entries found, 579 otf files checked, 579 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for otf files fonts | names | 563 entries found, 0 otf files checked, 0 okay fonts | names | identifying tree font files with suffix OTF fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for OTF files fonts | names | 6 entries found, 0 OTF files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for OTF files fonts | names | 73615 entries found, 0 OTF files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for OTF files fonts | names | 563 entries found, 0 OTF files checked, 0 okay fonts | names | 579 tree files identified, 183 skipped, 122 duplicates, 396 hash entries added, runtime 20.652 seconds fonts | names | identifying tree font files with suffix ttf fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for ttf files fonts | names | 6 entries found, 0 ttf files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for ttf files fonts | names | 73615 entries found, 227 ttf files checked, 227 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for ttf files fonts | names | 563 entries found, 0 ttf files checked, 0 okay fonts | names | identifying tree font files with suffix TTF fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for TTF files fonts | names | 6 entries found, 0 TTF files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for TTF files fonts | names | 73615 entries found, 0 TTF files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for TTF files fonts | names | 563 entries found, 0 TTF files checked, 0 okay fonts | names | 227 tree files identified, 101 skipped, 54 duplicates, 126 hash entries added, runtime 1.257 seconds fonts | names | identifying tree font files with suffix ttc fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for ttc files fonts | names | 6 entries found, 0 ttc files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for ttc files fonts | names | 73615 entries found, 0 ttc files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for ttc files fonts | names | 563 entries found, 0 ttc files checked, 0 okay fonts | names | identifying tree font files with suffix TTC fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for TTC files fonts | names | 6 entries found, 0 TTC files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for TTC files fonts | names | 73615 entries found, 0 TTC files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for TTC files fonts | names | 563 entries found, 0 TTC files checked, 0 okay fonts | names | 0 tree files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 1.188 seconds fonts | names | identifying tree font files with suffix dfont fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for dfont files fonts | names | 6 entries found, 0 dfont files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for dfont files fonts | names | 73615 entries found, 0 dfont files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for dfont files fonts | names | 563 entries found, 0 dfont files checked, 0 okay fonts | names | identifying tree font files with suffix DFONT fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for DFONT files fonts | names | 6 entries found, 0 DFONT files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for DFONT files fonts | names | 73615 entries found, 0 DFONT files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for DFONT files fonts | names | 563 entries found, 0 DFONT files checked, 0 okay fonts | names | 0 tree files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 1.186 seconds fonts | names | identifying tree font files with suffix afm fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for afm files fonts | names | 6 entries found, 0 afm files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for afm files fonts | names | 73615 entries found, 2437 afm files checked, 2437 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for afm files fonts | names | 563 entries found, 0 afm files checked, 0 okay fonts | names | identifying tree font files with suffix AFM fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-config for AFM files fonts | names | 6 entries found, 0 AFM files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf-dist for AFM files fonts | names | 73615 entries found, 0 AFM files checked, 0 okay fonts | names | scanning /media/data/melmoth/progetti/texlive2012/texmf for AFM files fonts | names | 563 entries found, 0 AFM files checked, 0 okay fonts | names | 2437 tree files identified, 239 skipped, 158 duplicates, 2198 hash entries added, runtime 5.710 seconds fonts | names | identifying system font files with suffix otf fonts | names | identifying system font files with suffix OTF fonts | names | 0 system files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.000 seconds fonts | names | identifying system font files with suffix ttf fonts | names | identifying system font files with suffix TTF fonts | names | 0 system files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.000 seconds fonts | names | identifying system font files with suffix ttc fonts | names | identifying system font files with suffix TTC fonts | names | 0 system files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.000 seconds fonts | names | identifying system font files with suffix dfont fonts | names | identifying system font files with suffix DFONT fonts | names | 0 system files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.000 seconds fonts | names | identifying system font files with suffix afm fonts | names | identifying system font files with suffix AFM fonts | names | 0 system files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.000 seconds fonts | names | 459 files rejected due to clashes fonts | names | 519 double lookups in mappings fonts | names | 12 double lookups in fallbacks system | logs | lua: compiling /media/data/melmoth/progetti/texlive2012/texmf-var/luatex-cache/context/2448223e6631addb83df348d74153606/fonts/data/names.tma into /media/data/melmoth/progetti/texlive2012/texmf-var/luatex-cache/context/2448223e6631addb83df348d74153606/fonts/data/names.tmc 09:37] melmoth@universe:~/progetti/debug$ mtxrun --script fonts --list --method=file --all | grep -i charis (nothing here) 09:37] melmoth@universe:~/progetti/debug$ mtxrun --script fonts --list --method=file --all | grep -i leag (nothing here) -- Marco

1 0

doublesided wider paragraphs
by Andy Thomas 22 May '12

22 May '12

Hello, I am trying to change the width of a paragraph on a page. I found \defineparagraphs and \setupparagraphs and it almost works. But for doublesided documents the text on verso pages is incorrectly aligned. I tried [location=inner], but the macros do not seem to be aware of that. I also found \startlocal (\startlokaal) in the ConTeXt getting started pdf, but Mk IV does not know \startlocal (any more?). My example: % setup the page format \definepapersize[wissenschaft][width=170mm,height=240mm] % use the new page format \setuppapersize[wissenschaft] % shape the page \setuplayout[topspace=40pt, header=0pt, headerdistance=0pt, backspace=42pt, leftmargin=0pt, width=280pt, height=560pt, rightmargindistance=20pt, rightmargin=100pt, footer=0pt] %\showframe \setuppagenumbering[alternative=doublesided] \defineparagraphs [fullwidth][n=1,before={\blank},after={\blank}] \setupparagraphs [fullwidth][1][width=400pt] \starttext \input tufte \startfullwidth \input tufte \stopfullwidth \input knuth \startfullwidth \input tufte \stopfullwidth \input tufte \stoptext My questions are: Is there no more \startlocal, how to locally adjust the layout on a page and how to make the example work? Thanks, Andy

3 6

Vertical alignment in nested itemizations
by Mikael P. Sundqvist 22 May '12

22 May '12

Dear list, My question is: Can I somehow force an "inner" itemization to begin on the same line as the outer one? Background: I am writing solutions to an exam and use nested itemizations, as in the test file \starttext \startitemize[n][style=sans] \item Bla bla \item \startitemize[a,packed][left={},right={)},stopper=,style=sans] \item Det sökta \stopitemize \stopitemize \stoptext Now the problem is that the a) does not stay on the same line as the 2., but is moved down half a line (this differs depending on the amount of text in the file). In the example code below this problem does not happen, but it happens in my file (which contains solutions to an exam not yet given, so I cannot show it to you). However, please see the attached png file to see what it looks like in my original file. Best regards, Mikael

5 7

Column distance in natural tables
by Marco 22 May '12

22 May '12

Hi, How to set the distance in a generic way between individual columns without breaking the frame rules? A workaround is to set the roffset of all columns, except the last one, but that's not very universal. \startsetups table \setupTABLE [frame=off, topframe=on] % generic, but frame rules are interrupted \setupTABLE [columndistance=1cm] % works, but ugly hard coded #columns %\setupTABLE [column] [1,2] [roffset=1cm] \stopsetups \starttext \bTABLE [setups=table] \bTR\bTD aaaaaa \eTD\bTD bbbbbbbb \eTD\bTD ccccccc \eTD\eTR \bTR\bTD dddd \eTD\bTD eeeeeeee \eTD\bTD fffff \eTD\eTR \bTR\bTD ggggg \eTD\bTD hhhh \eTD\bTD iiiiii \eTD\eTR \eTABLE \stoptext Marco

2 2

Interfering frames in natural tables
by Marco 22 May '12

22 May '12

Hi, the frames are interfering in the following example. How to avoid the 2pt-2-column bottom rule also be drawn at the top? \startsetups table \setupTABLE [frame=off] \setupTABLE [row] [first] [topframe=on] \setupTABLE [1] [first] [bottomframe=on, rulethickness=2pt] \stopsetups \starttext \bTABLE [setups=table] \bTR\bTD[nc=2] Lorem \eTD\eTR \bTR\bTD Ipsum \eTD\bTD Dolor \eTD\bTD Sit \eTD\eTR \bTR\bTD aaaaaa \eTD\bTD bbbbbbbb \eTD\bTD ccccccc \eTD\eTR \bTR\bTD dddd \eTD\bTD eeeeeeee \eTD\bTD fffff \eTD\eTR \eTABLE \stoptext Side question: Is it safe not to use setups and shorten the example? \starttext \bTABLE \setupTABLE [frame=off] \setupTABLE [row] [first] [topframe=on] \setupTABLE [1] [first] [bottomframe=on, rulethickness=2pt] \bTR\bTD[nc=2] Lorem \eTD\eTR \bTR\bTD Ipsum \eTD\bTD Dolor \eTD\bTD Sit \eTD\eTR \bTR\bTD aaaaaa \eTD\bTD bbbbbbbb \eTD\bTD ccccccc \eTD\eTR \bTR\bTD dddd \eTD\bTD eeeeeeee \eTD\bTD fffff \eTD\eTR \eTABLE \stoptext Marco

4 6

Re: [NTG-context] Testing TeX Live 2012
by Marco Pessotto 22 May '12

22 May '12

Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> writes: > On Thu, May 17, 2012 at 6:25 PM, Marco Pessotto <melmothx(a)gmail.com> wrote: >> The following message is a courtesy copy of an article >> that has been posted to gmane.comp.tex.context as well. Gmane today hates me... >> Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> writes: >> >>> (But that luatex is probably stripped.) >> >> So the next question is: how can I build luatex from those sources with >> the debug symbols? > > Fetch sources from here: > > http://www.tug.org/texlive/build.html > > Just run ./Build --debug, or, if you want to save time, this was the > command that didn't work for me (I think that I excluded too many > things): > > ./Build --debug --enable-cxx-runtime-hack \ > --disable-all-pkgs \ > [...] The ./Build seems to accept only the first argument, because ./Build --debug --disable-xindy -without-x --disable-xetex \ --disable-xdvipdfmx is building the whole world. Anyway, I think I got the backtrace: Starting program: /media/data/melmoth/progetti/texlive2012/bin/i386-linux/luatex --fmt="/media/data/melmoth/progetti/texlive2012/texmf-var/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en" --lua="/media/data/melmoth/progetti/texlive2012/texmf-var/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en.lui" --backend="pdf" "./ciao.tex" Program received signal SIGSEGV, Segmentation fault. 0x08148923 in getpdf (L=0x8916158) at ../../../texk/web2c/luatexdir/lua/lpdflib.c:615 615 lua_pushnumber(L, static_pdf->posstruct->pos.h); #0 0x08148923 in getpdf (L=0x8916158) at ../../../texk/web2c/luatexdir/lua/lpdflib.c:615 #1 0x082d3c75 in luaD_precall (L=0x8916158, func=0xafa362c, nresults=1) at ../../../texk/web2c/luatexdir/lua51/ldo.c:319 #2 0x082d3eb8 in luaD_call (L=0x8916158, func=0xafa362c, nResults=1) at ../../../texk/web2c/luatexdir/lua51/ldo.c:376 #3 0x082e43c7 in callTMres (L=0x8916158, res=0xafa3590, f=0x89343e8, p1=0xafa3590, p2=0x8f3daf4) at ../../../texk/web2c/luatexdir/lua51/lvm.c:88 #4 0x082e466d in luaV_gettable (L=0x8916158, t=0xafa3590, key=0x8f3daf4, val=0xafa3590) at ../../../texk/web2c/luatexdir/lua51/lvm.c:125 #5 0x082e56fc in luaV_execute (L=0x8916158, nexeccalls=2) at ../../../texk/web2c/luatexdir/lua51/lvm.c:437 #6 0x082d3ecf in luaD_call (L=0x8916158, func=0xafa3548, nResults=0) at ../../../texk/web2c/luatexdir/lua51/ldo.c:377 #7 0x082cc7ed in f_call (L=0x8916158, ud=0xbfffdc8c) at ../../../texk/web2c/luatexdir/lua51/lapi.c:795 #8 0x082d310d in luaD_rawrunprotected (L=0x8916158, f=0x82cc7c3 <f_call>, ud=0xbfffdc8c) at ../../../texk/web2c/luatexdir/lua51/ldo.c:116 #9 0x082d4219 in luaD_pcall (L=0x8916158, func=0x82cc7c3 <f_call>, u=0xbfffdc8c, old_top=288, ef=276) at ../../../texk/web2c/luatexdir/lua51/ldo.c:457 #10 0x082cc887 in lua_pcall (L=0x8916158, nargs=0, nresults=0, errfunc=23) at ../../../texk/web2c/luatexdir/lua51/lapi.c:816 #11 0x080cd562 in luacall (p=195, nameptr=0, is_string=1) at ../../../texk/web2c/luatexdir/lua/luastuff.w:397 #12 0x080cd68d in late_lua (pdf=0x89a9278, p=964) at ../../../texk/web2c/luatexdir/lua/luastuff.w:419 #13 0x0819d769 in out_what (pdf=0x89a9278, p=964) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:270 #14 0x0819e9d0 in hlist_out (pdf=0x89a9278, this_box=2463) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:567 #15 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=844) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #16 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=853) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #17 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=879) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 #18 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2236) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 #19 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2245) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 #20 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2258) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 #21 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2267) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #22 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2318) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #23 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2350) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #24 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2359) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 #25 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=2372) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 #26 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2421) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 #27 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2430) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 #28 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=2445) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 #29 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=968) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 #30 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2454) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 #31 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2487) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #32 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2540) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #33 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2564) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 #34 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2573) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 #35 0x080da3a9 in ship_out (pdf=0x89a9278, p=2573, shipping_mode=SHIPPING_PAGE) at ../../../texk/web2c/luatexdir/pdf/pdfshipout.w:275 #36 0x080edc8b in box_end (box_context=1073872897) at ../../../texk/web2c/luatexdir/tex/maincontrol.w:1398 #37 0x080fb873 in package (c=0) at ../../../texk/web2c/luatexdir/tex/packaging.w:1271 #38 0x080ed219 in handle_right_brace () at ../../../texk/web2c/luatexdir/tex/maincontrol.w:1189 #39 0x080ec8a8 in main_control () at ../../../texk/web2c/luatexdir/tex/maincontrol.w:905 #40 0x080e9ad2 in main_body () at ../../../texk/web2c/luatexdir/tex/mainbody.w:469 #41 0x080c1a17 in main (ac=5, av=0xbffff384) at ../../../texk/web2c/luatexdir/luatex.c:460 #0 0x08148923 in getpdf (L=0x8916158) at ../../../texk/web2c/luatexdir/lua/lpdflib.c:615 s = 0xbfffd764 "\230\327\377\277\215=췘}\227\b\004\002" i = 2 l = 41 #1 0x082d3c75 in luaD_precall (L=0x8916158, func=0xafa362c, nresults=1) at ../../../texk/web2c/luatexdir/lua51/ldo.c:319 ci = 0x8f9d9f8 n = -1073750964 cl = 0x8977d98 funcr = 516 #2 0x082d3eb8 in luaD_call (L=0x8916158, func=0xafa362c, nResults=1) at ../../../texk/web2c/luatexdir/lua51/ldo.c:376 No locals. #3 0x082e43c7 in callTMres (L=0x8916158, res=0xafa3590, f=0x89343e8, p1=0xafa3590, p2=0x8f3daf4) at ../../../texk/web2c/luatexdir/lua51/lvm.c:88 result = 360 #4 0x082e466d in luaV_gettable (L=0x8916158, t=0xafa3590, key=0x8f3daf4, val=0xafa3590) at ../../../texk/web2c/luatexdir/lua51/lvm.c:125 tm = 0x89343e8 loop = 0 #5 0x082e56fc in luaV_execute (L=0x8916158, nexeccalls=2) at ../../../texk/web2c/luatexdir/lua51/lvm.c:437 i = 37765382 ra = 0xafa3590 cl = 0x9e35940 base = 0xafa3560 k = 0x8f3dae8 pc = 0x8f3da40 #6 0x082d3ecf in luaD_call (L=0x8916158, func=0xafa3548, nResults=0) at ../../../texk/web2c/luatexdir/lua51/ldo.c:377 No locals. #7 0x082cc7ed in f_call (L=0x8916158, ud=0xbfffdc8c) at ../../../texk/web2c/luatexdir/lua51/lapi.c:795 c = 0xbfffdc8c #8 0x082d310d in luaD_rawrunprotected (L=0x8916158, f=0x82cc7c3 <f_call>, ud=0xbfffdc8c) at ../../../texk/web2c/luatexdir/lua51/ldo.c:116 lj = {previous = 0x0, b = {{__jmpbuf = {-12, 0, -1227595768, -1073751016, 990441431, -1629511496}, __mask_was_saved = 0, __saved_mask = {__val = {20, 139901328, 3086573556, 3086578592, 3067371528, 3221216184, 24, 184240568, 4294967295, 3086578592, 0, 0, 3086573556, 3086578592, 3067371528, 3221216232, 3085708684, 143745476, 20, 3085712571, 50644704, 0, 3067371528, 3221216280, 135055310, 20, 20, 64, 0, 329, 0, 3221216312}}}}, status = 0} #9 0x082d4219 in luaD_pcall (L=0x8916158, func=0x82cc7c3 <f_call>, u=0xbfffdc8c, old_top=288, ef=276) at ../../../texk/web2c/luatexdir/lua51/ldo.c:457 status = -1073750920 oldnCcalls = 0 old_ci = 0 old_allowhooks = 1 '\001' old_errfunc = 0 #10 0x082cc887 in lua_pcall (L=0x8916158, nargs=0, nresults=0, errfunc=23) at ../../../texk/web2c/luatexdir/lua51/lapi.c:816 c = {func = 0xafa3548, nresults = 0} status = 184169788 func = 276 #11 0x080cd562 in luacall (p=195, nameptr=0, is_string=1) at ../../../texk/web2c/luatexdir/lua/luastuff.w:397 base = 23 ls = {s = 0xafb4960 "_bpnf_(27969941,683329,265737,'/A 15 0 R /Subtype /Link /Border [ 0 0 0 ] /F 4')", size = 0} i = 0 ll = 80 lua_id = 0xafb49b8 "\\latelua " s = 0xafb4960 "_bpnf_(27969941,683329,265737,'/A 15 0 R /Subtype /Link /Border [ 0 0 0 ] /F 4')" #12 0x080cd68d in late_lua (pdf=0x89a9278, p=964) at ../../../texk/web2c/luatexdir/lua/luastuff.w:419 No locals. #13 0x0819d769 in out_what (pdf=0x89a9278, p=964) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:270 j = 184204723 #14 0x0819e9d0 in hlist_out (pdf=0x89a9278, this_box=2463) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:567 localpos = {pos = {h = 4661756, v = 46204089}, dir = 0} refpos = 0xbfffdedc cur = {h = 0, v = 0} tmpcur = {h = 16777216, v = 184204797} basepoint = {h = 235536384, v = 184204797} size = {h = 0, v = 0} effective_horizontal = 218431488 save_h = 184204816 edge = 16777216 enddir_ptr = 184204816 g_order = 0 g_sign = 0 p = 964 q = 184204825 leader_box = 16777216 leader_wd = 184204825 lx = 458774 outer_doing_leaders = 184204825 prev_p = 2469 glue_temp = 2.6936023597933013e-289 cur_glue = 0 cur_g = 0 rule = {wd = 184204784, ht = 16777216, dp = 184204784} ci = {wd = 67436544, ht = 184204772, dp = 184877056} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #15 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=844) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 4661756, v = 46204089}, dir = 0} refpos = 0xbfffdfdc cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 0 save_h = -1073749964 edge = 0 enddir_ptr = -1073750272 g_order = 0 g_sign = 0 p = 2463 q = -1073749964 leader_box = -1073749964 leader_wd = -1073749964 lx = -1073749959 outer_doing_leaders = -1073749942 prev_p = 850 glue_temp = 1.5914928323990413e-314 cur_glue = 0 cur_g = 0 rule = {wd = -1073750272, ht = -1073750308, dp = -1209279982} ci = {wd = 16422, ht = -1208388656, dp = -1208393740} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #16 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=853) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 4661756, v = 46204089}, dir = 0} refpos = 0xbfffe0cc cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = -1224736768 edge = 0 enddir_ptr = 0 g_order = 0 g_sign = 0 p = 844 q = 0 leader_box = 0 leader_wd = -1208396064 lx = -1 outer_doing_leaders = -1 prev_p = 279 glue_temp = 4.0664371788623444e-294 cur_glue = 0 cur_g = 0 rule = {wd = -72515583, ht = -1073749797, dp = -1073749797} ci = {wd = 0, ht = -1073750096, dp = 4} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #17 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=879) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 localpos = {pos = {h = 4661756, v = 46204089}, dir = 0} refpos = 0xbfffe1bc cur = {h = 0, v = -39055524} tmpcur = {h = 0, v = -38372195} basepoint = {h = 0, v = 683329} size = {h = 0, v = 0} effective_vertical = 949066 save_v = 184205168 top_edge = -39158627 edge = -1073749736 g_order = 2 '\002' g_sign = 1 p = 853 leader_box = -1073749736 leader_ht = 135701740 lx = 167570456 outer_doing_leaders = 49 glue_temp = 2.9200094058968333e-267 cur_glue = 0 cur_g = 0 rule = {wd = -1209425214, ht = 103103, dp = 170672392} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #18 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2236) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe2ac cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = -1073749296 edge = 4953340 enddir_ptr = 0 g_order = 0 g_sign = 0 p = 879 q = -1073749284 leader_box = 0 leader_wd = -1208393740 lx = -1073749404 outer_doing_leaders = -1073747744 prev_p = 1486 glue_temp = 4.9406564584124654e-324 cur_glue = 0 cur_g = 0 rule = {wd = 184205242, ht = 16777216, dp = 184205242} ci = {wd = 67436544, ht = 184205238, dp = 65536} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #19 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2245) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe39c cur = {h = 0, v = -39158627} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 39158627} size = {h = 0, v = 0} effective_vertical = 39158627 save_v = 0 top_edge = -39158627 edge = 0 g_order = 0 '\000' g_sign = 0 p = 2236 leader_box = 0 leader_ht = 38371357 lx = 4102703 outer_doing_leaders = 0 glue_temp = 3.0685973177532751e-307 cur_glue = 0 cur_g = 0 rule = {wd = 136, ht = -1073749152, dp = -1073749320} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #20 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2258) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe49c cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = 0 edge = 0 enddir_ptr = 0 g_order = 0 g_sign = 0 p = 2245 q = 0 leader_box = 33418017 leader_wd = 4102703 lx = 0 outer_doing_leaders = -1073748804 prev_p = 2264 glue_temp = 1.5914940230972478e-314 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 4, dp = -1073749504} ci = {wd = 0, ht = 46, dp = -1073749482} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #21 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2267) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe59c cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = 0 edge = 39449261 enddir_ptr = 0 g_order = 0 g_sign = 0 p = 2258 q = -1073748564 leader_box = 4953340 leader_wd = 139902235 lx = -1208395008 outer_doing_leaders = 139902235 prev_p = 1402 glue_temp = 0 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 0, dp = 0} ci = {wd = 0, ht = 0, dp = 0} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #22 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2318) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe69c cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = 4102703 edge = 0 enddir_ptr = -1073748324 g_order = 2 g_sign = 2 p = 2267 q = 184170268 leader_box = 33554433 leader_wd = 1 lx = 0 outer_doing_leaders = 184170280 prev_p = 2192 glue_temp = 4.7703106420200662e-261 cur_glue = 0 cur_g = 0 rule = {wd = -4953340, ht = 184170304, dp = 0} ci = {wd = 139901788, ht = 6, dp = 65536} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #23 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2350) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe78c cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 27969941 save_h = 8 edge = 184219984 enddir_ptr = -1073748248 g_order = 0 g_sign = 0 p = 2318 q = -1208388704 leader_box = -1208393740 leader_wd = 184217344 lx = 49 outer_doing_leaders = -1073748220 prev_p = 2183 glue_temp = -4.6748906364123907e-39 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 0, dp = 165842852} ci = {wd = 4, ht = 165856969, dp = 5} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #24 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2359) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 localpos = {pos = {h = 4661756, v = 7831894}, dir = 0} refpos = 0xbfffe86c cur = {h = 0, v = 3729191} tmpcur = {h = 0, v = 42887818} basepoint = {h = 0, v = 39158627} size = {h = 0, v = 0} effective_vertical = 39158627 save_v = 0 top_edge = 0 edge = 0 g_order = 0 '\000' g_sign = 0 p = 2350 leader_box = -1073748008 leader_ht = -1209258612 lx = 80 outer_doing_leaders = 112 glue_temp = 2.5538606668334443e-313 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 3729191, dp = -1073748076} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #25 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=2372) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 localpos = {pos = {h = 4661756, v = 50719712}, dir = 0} refpos = 0xbfffe95c cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_vertical = 0 save_v = -1 top_edge = 0 edge = 184170016 g_order = 0 '\000' g_sign = 0 p = 2359 leader_box = -1073747144 leader_ht = 137260642 lx = 143745368 outer_doing_leaders = 184170028 glue_temp = 8.728394123385621e-256 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 0, dp = -1073747816} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #26 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2421) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 localpos = {pos = {h = 4661756, v = 50719712}, dir = 0} refpos = 0xbfffea4c cur = {h = 4661756, v = 0} tmpcur = {h = 4661756, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 0 save_h = -1073747560 edge = -1209279982 enddir_ptr = -1073747552 g_order = 2 g_sign = 1 p = 2372 q = -1073747360 leader_box = -1209330548 leader_wd = -1073747532 lx = -1073747312 outer_doing_leaders = -1073747360 prev_p = 2402 glue_temp = 1.7216629775477761e-268 cur_glue = 0 cur_g = 0 rule = {wd = 4661756, ht = -1073745820, dp = -1073747560} ci = {wd = 0, ht = 148260500, dp = 184170004} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #27 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2430) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 localpos = {pos = {h = 0, v = 50719712}, dir = 0} refpos = 0xbfffeb2c cur = {h = 0, v = -50719712} tmpcur = {h = 0, v = -50719712} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_vertical = 0 save_v = 48 top_edge = -55380990 edge = 0 g_order = 0 '\000' g_sign = 0 p = 2421 leader_box = -1208526462 leader_ht = -1208525712 lx = 144195256 outer_doing_leaders = 0 glue_temp = 0 cur_glue = 0 cur_g = 0 rule = {wd = 143745368, ht = 4661278, dp = 184218216} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #28 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=2445) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbfffec0c cur = {h = 0, v = -55380990} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 55380990} size = {h = 0, v = 0} effective_vertical = 55380990 save_v = 143745368 top_edge = -55380990 edge = -1073747048 g_order = 0 '\000' g_sign = 0 p = 2430 leader_box = 0 leader_ht = 1127743488 lx = 143745368 outer_doing_leaders = -1 glue_temp = 2.1622644806570167e-267 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 0, dp = 63435} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #29 0x0819fca4 in vlist_out (pdf=0x89a9278, this_box=968) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:909 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbfffecfc cur = {h = 0, v = -55380990} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 55380990} size = {h = 0, v = 0} effective_vertical = 55380990 save_v = 151407744 top_edge = -55380990 edge = 166808152 g_order = 0 '\000' g_sign = 0 p = 2445 leader_box = -1073746840 leader_ht = 135911273 lx = 144347768 outer_doing_leaders = 2481 glue_temp = 8.7273575683836833e-256 cur_glue = 0 cur_g = 0 rule = {wd = 143745368, ht = -2, dp = 0} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #30 0x0819e1b8 in hlist_out (pdf=0x89a9278, this_box=2454) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:457 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbfffedfc cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 39158276 save_h = 166807960 edge = 5 enddir_ptr = -1073746632 g_order = 0 g_sign = 0 p = 968 q = 0 leader_box = 1080041472 leader_wd = 0 lx = 1072693248 outer_doing_leaders = 143746464 prev_p = 2481 glue_temp = -2.5741264244291889e-39 cur_glue = 0 cur_g = 0 rule = {wd = 456, ht = 150591968, dp = 184169812} ci = {wd = 8388638, ht = 184169812, dp = 143784856} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #31 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2487) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbfffeefc cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 39158276 save_h = -1208526186 edge = -1208388648 enddir_ptr = -1208526462 g_order = 0 g_sign = 0 p = 2454 q = -1209272810 leader_box = -1208526163 leader_wd = -1208388704 lx = 47456 outer_doing_leaders = -1208388656 prev_p = 2493 glue_temp = -1.4275821316910091e-44 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = -1209268322, dp = -1073746408} ci = {wd = 184169980, ht = 0, dp = 1062638080} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #32 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2540) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbfffeffc cur = {h = 0, v = 0} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 39158276 save_h = 144442304 edge = -1208388648 enddir_ptr = -1073746104 g_order = 0 g_sign = 0 p = 2487 q = -1073746104 leader_box = 137182927 leader_wd = 143745368 lx = 0 outer_doing_leaders = 0 prev_p = 2529 glue_temp = 1.0694858786464972e-311 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = 184216928, dp = 56} ci = {wd = -1, ht = -1073746184, dp = 137197250} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #33 0x0819e1cc in hlist_out (pdf=0x89a9278, this_box=2564) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:459 localpos = {pos = {h = 0, v = 0}, dir = 0} refpos = 0xbffff0ec cur = {h = -4736286, v = 0} tmpcur = {h = -4736286, v = 0} basepoint = {h = 0, v = 0} size = {h = 0, v = 0} effective_horizontal = 39158276 save_h = -1208388704 edge = 46904 enddir_ptr = -1208388656 g_order = 0 g_sign = 0 p = 2540 q = -1073745848 leader_box = -1209258612 leader_wd = 144349168 lx = 360 outer_doing_leaders = 184074384 prev_p = 2515 glue_temp = -1.4275813633779797e-44 cur_glue = 0 cur_g = 0 rule = {wd = -4736286, ht = 0, dp = 4096} ci = {wd = 0, ht = 0, dp = 0} i = 1 save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "hlist_out" #34 0x0819fcb8 in vlist_out (pdf=0x89a9278, this_box=2573) at ../../../texk/web2c/luatexdir/pdf/pdflistout.w:911 localpos = {pos = {h = 4736286, v = 0}, dir = 0} refpos = 0x89751b8 cur = {h = 0, v = -55380990} tmpcur = {h = 0, v = 0} basepoint = {h = 0, v = 55380990} size = {h = 0, v = 0} effective_vertical = 55380990 save_v = 1 top_edge = -50644704 edge = -1073745640 g_order = 0 '\000' g_sign = 0 p = 2564 leader_box = -1073745592 leader_ht = 135081142 lx = 144347768 outer_doing_leaders = 7 glue_temp = 0 cur_glue = 0 cur_g = 0 rule = {wd = 0, ht = -4736286, dp = -1073745704} save_loc = 0 save_dvi = {h = 0, v = 0} __PRETTY_FUNCTION__ = "vlist_out" #35 0x080da3a9 in ship_out (pdf=0x89a9278, p=2573, shipping_mode=SHIPPING_PAGE) at ../../../texk/web2c/luatexdir/pdf/pdfshipout.w:275 j = 0 k = 50644704 post_callback_id = 31 pre_callback_id = 30 refpoint = {pos = {h = 4736286, v = 50644704}, dir = 135246891} cur = {h = 0, v = 50644704} __PRETTY_FUNCTION__ = "ship_out" #36 0x080edc8b in box_end (box_context=1073872897) at ../../../texk/web2c/luatexdir/tex/maincontrol.w:1398 __PRETTY_FUNCTION__ = "box_end" #37 0x080fb873 in package (c=0) at ../../../texk/web2c/luatexdir/tex/packaging.w:1271 h = 1337 p = 0 d = 1073741823 grp = 4 #38 0x080ed219 in handle_right_brace () at ../../../texk/web2c/luatexdir/tex/maincontrol.w:1189 p = 0 q = 0 d = 144195256 f = -1073745304 #39 0x080ec8a8 in main_control () at ../../../texk/web2c/luatexdir/tex/maincontrol.w:905 No locals. #40 0x080e9ad2 in main_body () at ../../../texk/web2c/luatexdir/tex/mainbody.w:469 pdftex_map = "pdftex.map" #41 0x080c1a17 in main (ac=5, av=0xbffff384) at ../../../texk/web2c/luatexdir/luatex.c:460 No locals. A debugging session is active. Inferior 1 [process 25972] will be killed. Quit anyway? (y or n) Reminder: ciao.tex: %%% \setupinteraction[state=start,color=black,contrastcolor=black,style=bold] \starttext \placecontent \chapter{hello} \stoptext %%% -- Marco

4 14

Re: [NTG-context] stack marginals: text and figures
by Andy Thomas 22 May '12

22 May '12

> > I made a small example to show the behavior: > > > > […] > > > > This is a sentence.\margintext{This is a note in the margin.} Another > > sentence.\margintext{Another note.} \placefigure[margin][fig:one]{This is a > > small figure.}{\externalfigure[test][width=100pt]} > > \placefigure[margin][fig:two]{This is another small > > figure.}{\externalfigure[test][width=100pt]} \stoptext > > > > I also tried to do things such as \margintext{\placefigure...}}, but had no > > success. > > Why not? The following works here: > > This is a sentence. > \margintext{This is a note in the margin.} > Another sentence. > \margintext{Another note.} > \margintext > {\placefigure[here][fig:one] > {This is a small figure.} > {\externalfigure[test][width=100pt]}} > \margintext > {\placefigure[here][fig:two] > {This is another small figure.} > {\externalfigure[test][width=100pt]}} > > > Marco \margintext{\placefigure[here]…} does indeed work. I cannot even reproduce why I was not able to do it, but I assume I tried \margintext{\placefigure[margin]…} which does not make much sense... > > Dear ConTeXt group, > > > > I am trying to stack text and figures in the margin. After getting some help, I am able to setup the text just fine, the notes do not overlap. I am also able to stack figures, they also do not overlap. But figures and text does not 'know of each other'. They do overlap. > > > > I made a small example to show the behavior: > > > > […] > > > > \definemargindata [margintext] > > [ > > location=outer, > > width=100pt, > > align=flushouter, > > stack=continue, % or yes > > ] > > Use \setupmargindata to change the values of a existing command. In this example it doesn’t matter but that’s not always the case. > > Wolfgang I also changed \definemargindata to \setumargindata. Andy

1 0

Split \startalign content on more pages
by elgospa＠libero.it 22 May '12

22 May '12

Thank you Luigi. I haven't tried your solution yet, as I was abroad the previous days. I hope I will try later. Bye. Arrigo

1 0

stack marginals: text and figures
by Andy Thomas 21 May '12

21 May '12

Dear ConTeXt group, I am trying to stack text and figures in the margin. After getting some help, I am able to setup the text just fine, the notes do not overlap. I am also able to stack figures, they also do not overlap. But figures and text does not 'know of each other'. They do overlap. I made a small example to show the behavior: % setup the page format \definepapersize[wissenschaft][width=170mm,height=240mm] % use the new page format \setuppapersize[wissenschaft] % shape the page \setuplayout[topspace=40pt, header=0pt, headerdistance=0pt, backspace=42pt, leftmargin=0pt, width=280pt, height=560pt, rightmargindistance=20pt, rightmargin=100pt, footer=0pt] %\showframe \setuppagenumbering[alternative=doublesided] \definemargindata [margintext] [ location=outer, width=100pt, align=flushouter, stack=continue, % or yes ] \starttext This is a sentence.\margintext{This is a note in the margin.} Another sentence.\margintext{Another note.} \placefigure[margin][fig:one]{This is a small figure.}{\externalfigure[test][width=100pt]} \placefigure[margin][fig:two]{This is another small figure.}{\externalfigure[test][width=100pt]} \stoptext I also tried to do things such as \margintext{\placefigure...}}, but had no success. Is there a way to achieve a 'stacking' of all marginals? Andy

3 2

Missing math font breaks compilation
by Wolfgang Schuster 21 May '12

21 May '12

Hi, typefaces with a missing font for math produce an error when it’s applied after \starttext which is common when the project structure is used where environment files are loaded after \startproduct or \startcomponent. Minimal example: \starttext \definetypeface[test][rm][serif][pagella] [default] %\definetypeface[test][mm][math] [palatino][default] \setupbodyfont[test] \input knuth \stoptext Wolfgang

2 1

about \hangaround, defineenumeration
by dalyoung 19 May '12

19 May '12

Dear all, I defined enumerations "Theorem", "Proof", and "Example" as in the sample code. It works fine, but I'd like to arrange it in better shape. 1. Theorem 1 and it's proof look good. 2. The proof of Theorem 2 i) when I use \startitemize it starts from the next line not immediately after "Proof". Q: How to start the sentence right after "Proof"? ii) after \stopitemize, it changes the line and put blacksquare at the end. So, there is a blank line always. Q: How to place blacksquare at the end of the last line of the sentence? iii) leading symbol of itemize, "b" is inside the figure. Q: How to correct this or is it possible to place the figure at the right side? 3. I'd like to put "Example" and it's number in a frame, but I couldn't. Is there a way of doing that? Should I make a new command to do that? Thank you for reading. Best regards, Dalyoung

1 0

full page images on fixed pages
by Henning Hraban Ramm 19 May '12

19 May '12

In my current book project, I need to set images on fixed pages (because only a few pages get printed in color), and full-page, i.e. bleeding 3mm. What’s the best way to achieve each? The only way for full-page images that I know of, is via layer/ background, but I find it difficult to activate and deactivate that at the right pages. Greetlings, Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

3 4

counter reseting at every heading
by Peter Schorsch 18 May '12

18 May '12

Hi, I realized yesterday that my counter for the module does not reset itself as before. What I need is a counter that resets after each heading (chapter, section, subsection, subsubsection and so on). This is what I know about counter reseting at the moment: \definecounter[ParagraphNumber][prefix=no,way=bysection] - way=bychapter: reseting counter at every chapter (default) - way=bysection: reseting counter at every section (not at chapters) - way={bychapter,bysection,bysubsection,bysubsubsection}: does not work \setuphead[chapter,section,subsection,subsubsection][after={\resetcounter[ParagraphNumber]}] does work but it messes with the distance between heading and normal text. What is the correct/best way to make the counter reseting every heading without messing around? Thanks P.

3 2

imposition 2UP = empty pages
by Henning Hraban Ramm 18 May '12

18 May '12

Hi there, like in January (see mail by Mari), the latest beta produces only empty pages with 2UP imposition schema; others work (tested 2SIDE and 2DOWN). e.g. \setuppapersize [A5][A4,landscape] \setuppagenumbering [alternative=doublesided,location=footer] \setuplayout [margin=0pt,width=fit] \setupbackgrounds [text][text][background=screen,backgroundscreen=0.7] \setupcolors [state=start] \setuplayout [location=middle,marking=on] \setuparranging [2UP] %[2*2*4,doublesided] \startbuffer[Fakepage] \strut \blank[force] \midaligned{2UP} \vfill \midaligned{This is page \recurselevel} \vfill \stopbuffer \setupheadertexts[\CONTEXT] \starttext \dorecurse{16}{\getbuffer[Fakepage]\page} \stoptext Greetlings, Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

3 10