- ntg-context - NTG Mailing Lists

clutter with \start and \stop
by Peter Münster 05 Jul '12

05 Jul '12

Hi, Say I want Tufte in 2 columns and Knuth in 1 column: --8<---------------cut here---------------start------------->8--- \starttext \startcolumns[n=2] \startsection[title=Tufte] \input tufte \stopsection \startsection[title=Tufte and Knuth] \input tufte \stopcolumns \input knuth % \startcolumns[n=1] knuth \stopcolumns does not work \startcolumns[n=2] \input tufte \stopsection \stopcolumns \stoptext --8<---------------cut here---------------end--------------->8--- It works, but isn't this a bit ugly to mix up the \starts and \stops ? In XML, that would be wrong. Is this just the normal ConTeXt way, or is there a cleaner method? TIA for any hints, -- Peter

4 10

Re: [NTG-context] framed \\
by Meer, H. van der 05 Jul '12

05 Jul '12

Sorry, missed the inclusion of the output of the minimal example. In the ConTeXT manual I see that a construct \framed{A\\B\\C} should type set as three lines below each other: A B C But instead the \\'s disappear without a trace. Did I miss some change on the use of \\'s in \framed? Could it be a sideeffect of recent changes? Hans van der Meer \starttext \framed{A\\B\\C} \stoptext

4 5

framed \\
by Meer, H. van der 05 Jul '12

05 Jul '12

In the ConTeXT manual I see that a construct \framed{A\\B\\C} should type set as three lines below each other: A B C But instead the \\'s<smb://'s> disappear without a trace. Did I miss some change on the use of \\'s<smb://'s> in \framed? Could it be a sideeffect of recent changes? Hans van der Meer

1 0

bug in latest beta
by JIN Xiao-Yong 05 Jul '12

05 Jul '12

I got the following error in the minimal example (which is all shown in the output below) system > tex > error on line 4 in file simpl.tex: Undefined control sequence ... 1 \setuphead[section][before={\column}] 2 \starttext 3 \startcolumns[n=2] 4 >> \section{this is a section} 5 \section{another section in a new column} 6 \stopcolumns 7 \stoptext 8 \208>multicolumn:yes ->\par {\testrulewidth \zeropoint \ruledvskip \textheig... \page_breaks_columns_process ...dle_direct \v!yes \fi \relax \the \everyafte... <to be read again> \relax \dohandleheadpagebreakyes ...ter \c!before \relax \doif {\headparameter \c!a... \docheckheadbefore ...se \continuoussectionhead #1 \fi \doheadspacingbeforeyes ...handleheadpagebreakyes \headparameter \c!inbetwee... ... l.4 \section{this is a section} Basically, the first line in the file introduces the error. It worked a few weeks ago.

3 2

startalign broken in latest checkout
by Prashanth 04 Jul '12

04 Jul '12

Hi, The latest checkout has a problem with even the most trivial example of \startalign (taken from the wiki): \starttext \startformula \startalign \NC v \NC = u + at \NR \NC h \NC= ut + \frac12 gt^2 \NR \stopalign \stopformula \stoptext % context --version mtx-context | ConTeXt Process Management 0.60 mtx-context | mtx-context | main context file: /opt/context-minimals/texmf-context/tex/context/base/context.mkiv mtx-context | current version: 2012.07.04 15:55 Output ***** ***** ConTeXt-IV output: ***** cd "/home/3shared/Source/prash/doc/context-trials" ***** context --nonstopmode demo.context ***** mtx-context | run 1: luatex --fmt="/home/prash/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/cont-en" --interaction="nonstopmode" --jobname="demo" --lua="/home/prash/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:input="./demo.context" --c:kindofrun=1 --c:nonstopmode "cont-yes.mkiv" This is LuaTeX, Version beta-0.70.2-2012052410 (TeX Live 2012) \write18 enabled. (/opt/context-minimals/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2012.07.04 15:55 MKIV fmt: 2012.7.4 int: english/english system > cont-new.mkiv loaded (/opt/context-minimals/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) fonts > latin modern fonts are not preloaded languages > language en is active (demo.context{/opt/context-minimals/texmf-fonts/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) fonts > typescripts > unknown: library 'loc' {/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-math.map}{/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded ! Use of \expandafter doesn't match its definition. system > tex > error on line 4 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 >> \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 \math_both_eqalign_no_aligned ...andafter \bgroup \the \scratchtoks \crcr <to be read again> \NC l.4 \NC v \NC = u + at \NR ! Missing { inserted. system > tex > error on line 4 in file demo.context: Missing { inserted ... 1 \starttext 2 3 \startformula \startalign 4 >> \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <to be read again> \crcr <to be read again> \NC l.4 \NC v \NC = u + at \NR ! Missing # inserted in alignment preamble. system > tex > error on line 4 in file demo.context: Missing # inserted in alignment preamble ... 1 \starttext 2 3 \startformula \startalign 4 >> \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <to be read again> \crcr <to be read again> \NC l.4 \NC v \NC = u + at \NR ! Extra alignment tab has been changed to \cr. system > tex > error on line 4 in file demo.context: Extra alignment tab has been changed to \cr ... 1 \starttext 2 3 \startformula \startalign 4 >> \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <template> \endtemplate \math_alignment_NC ->\aligntab l.4 \NC v \NC = u + at \NR ! Extra alignment tab has been changed to \cr. system > tex > error on line 4 in file demo.context: Extra alignment tab has been changed to \cr ... 1 \starttext 2 3 \startformula \startalign 4 >> \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <template> \endtemplate \NR ->\aligntab \dostoptagged \dodoubleempty \math_alignment_NR_indeed l.4 \NC v \NC = u + at \NR ! Use of \expandafter doesn't match its definition. system > tex > error on line 5 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 >> \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 \syst_helpers_inspect_next_optional_character ... \fi <to be read again> \NC l.5 \NC h \NC= ut + \frac12 gt^2 \NR ! Extra alignment tab has been changed to \cr. system > tex > error on line 5 in file demo.context: Extra alignment tab has been changed to \cr ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 >> \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <template> \endtemplate \math_alignment_NC ->\aligntab l.5 \NC h \NC= ut + \frac12 gt^2 \NR ! Extra alignment tab has been changed to \cr. system > tex > error on line 5 in file demo.context: Extra alignment tab has been changed to \cr ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 >> \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <template> \endtemplate \math_alignment_NC ->\aligntab l.5 \NC h \NC = ut + \frac12 gt^2 \NR ! Use of \expandafter doesn't match its definition. system > tex > error on line 5 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 >> \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 \frac ...acmode \expandafter \math_fractions_auto \or \expandafter \math_fra... l.5 \NC h \NC= ut + \frac 12 gt^2 \NR ! Extra alignment tab has been changed to \cr. system > tex > error on line 5 in file demo.context: Extra alignment tab has been changed to \cr ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 >> \NC h \NC= ut + \frac12 gt^2 \NR 6 \stopalign \stopformula 7 8 \stoptext 9 <template> \endtemplate \NR ->\aligntab \dostoptagged \dodoubleempty \math_alignment_NR_indeed l.5 \NC h \NC= ut + \frac12 gt^2 \NR ! Use of \expandafter doesn't match its definition. system > tex > error on line 6 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 \syst_helpers_inspect_next_optional_character ... \fi <to be read again> \stopalign l.6 \stopalign \stopformula ! Use of \expandafter doesn't match its definition. system > tex > error on line 6 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 \formulaparameter ...er \doformulaparentparameter \csname \??formula \curren... \stopinnermath ...stop \formulaparameter \c!align \endcsname \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula ! Missing \endcsname inserted. system > tex > error on line 6 in file demo.context: Missing \endcsname inserted ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 <to be read again> \422>:parent \formulaparameter ...ormula :\s!parent \endcsname {#1}\fi \endcsname \stopinnermath ...stop \formulaparameter \c!align \endcsname \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula ! Use of \csname\endcsname doesn't match its definition. system > tex > error on line 6 in file demo.context: Use of ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 <recently read> \422>:parent \formulaparameter ...ormula :\s!parent \endcsname {#1}\fi \endcsname \stopinnermath ...stop \formulaparameter \c!align \endcsname \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula ! Display math should end with \Ustopdisplaymath. system > tex > error on line 6 in file demo.context: Display math should end with \Ustopdisplaymath ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 \stopinnermath ...laparameter \c!align \endcsname \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula ! Missing $ inserted. system > tex > error on line 6 in file demo.context: Missing $ inserted ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 <inserted text> $ <to be read again> \normalpar \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula ! Display math should end with $$. system > tex > error on line 6 in file demo.context: Display math should end with $$ ... 1 \starttext 2 3 \startformula \startalign 4 \NC v \NC = u + at \NR 5 \NC h \NC= ut + \frac12 gt^2 \NR 6 >> \stopalign \stopformula 7 8 \stoptext 9 <to be read again> \normalpar \stopdisplaymath ->\stopinnermath $$\par \afterdisplayspace \par \egroup \strc_formulas_stop_formula ...native \v!formula } \dostoptagged \dostoptagge... l.6 \stopalign \stopformula backend > xmp > using file '/opt/context-minimals/texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1 ) )</opt/context-minimals/texmf-fonts/fonts/opentype/public/lm/lmroman12-regular.otf> mkiv lua stats > used config file - selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path - /home/prash/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver - loadtime 0.015 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 45 found files, scanned paths: mkiv lua stats > stored bytecode data - 306 modules, 65 tables, 371 chunks mkiv lua stats > cleaned up reserved nodes - 41 nodes, 9 lists of 435 mkiv lua stats > node memory usage - 2 glue, 2 penalty, 9 attribute, 30 glue_spec, 3 attribute_list mkiv lua stats > node list callback tasks - 6 unique task lists, 5 instances (re)created, 145 calls mkiv lua stats > used backend - pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns - en::2 mkiv lua stats > jobdata time - 0.000 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks - 290 direct, 568 indirect, 858 total mkiv lua stats > randomizer - resumed with value 0.81745024575733 mkiv lua stats > lxml preparation time - 0.000 seconds, 0 nodes, 15 lpath calls, 0 cached calls mkiv lua stats > result saved in file - demo.pdf mkiv lua stats > loaded fonts - 33 files: stmary10.afm lmmono12-regular.otf lmmono8-regular.otf lmmono9-regular.otf lmroman12-bold.otf lmroman12-regular.otf lmroman7-bold.otf lmroman7-regular.otf lmroman9-bold.otf lmroman9-regular.otf lmsans12-regular.otf lmsans8-regular.otf lmsans9-regular.otf eufb10.tfm eufb7.tfm eufm10.tfm eufm7.tfm msam10.tfm msam7.tfm msbm10.tfm msbm7.tfm lmex10.tfm lmmi12.tfm lmmi7.tfm lmmi9.tfm lmmib10.tfm lmmib7.tfm lmsy10.tfm lmsy7.tfm lmsy9.tfm rm-lmr12.tfm rm-lmr7.tfm rm-lmr9.tfm mkiv lua stats > fonts load time - 0.240 seconds mkiv lua stats > luatex banner - this is luatex, version beta-0.70.2-2012052410 (tex live 2012) mkiv lua stats > control sequences - 34579 of 65536 + 100000 mkiv lua stats > current memory usage - 46 MB (ctx: 47 MB) mkiv lua stats > runtime - 0.645 seconds, 1 processed pages, 1 shipped pages, 1.550 pages/second

2 1

underbar not colored
by Meer, H. van der 04 Jul '12

04 Jul '12

I wonder. Shouldn't the underbar show up colored too? Hans van der Meer Example: \starttext \underbar{color this}: \startcolor[red]\underbar{but the underbar isn't!}\stopcolor \stoptext

2 1

problem with aligncharacter=yes
by Peter Münster 04 Jul '12

04 Jul '12

Hi, This file generates an error (Missing control sequence inserted) with the latest beta version: --8<---------------cut here---------------start------------->8--- \starttext \bTABLE[aligncharacter=yes] \bTR \bTD 3.3 \eTD \eTR \eTABLE \stoptext --8<---------------cut here---------------end--------------->8--- -- Peter

2 1

Centering a figure vertically on a page
by Marcin Borkowski 03 Jul '12

03 Jul '12

Hello, the subject line basically covers my problem: I have a large (tikz) figure, and I want to have it by itself on a page, centered both horizontally and vertically. How can I achieve this? I already know that \setuppagenumber[state=stop] is a good idea, and \midaligned{...} gives me horizontal centering; what about vertical? The problem is that the figure is larger than the text area (and this doesn't bother me, it's a game board and it may extend almost to the paper border), so \vfill doesn't work (and \vss doesn't, either). TIA -- Marcin Borkowski http://mbork.pl

6 10

Re: [NTG-context] [***SPAM***] quotationmarks just before new line
by d_jan 03 Jul '12

03 Jul '12

> Hello, > > It frequently happens to me that a new line in an output-document starts just after a quotation mark. So I encounter lines in my ConTeX-created .pdf like: > > "And the prince of Denmark spoke: ' > ?how weary, stale, flat, and unprofitable seem to me all the uses of this world!' " > > Its hard to say how often this happens but I'd say its roughly every 50 quotations. > > A minimal example to see the problem in action: (also onhttp://pastebin.com/cEMiGZju) > > \mainlanguage [de] > \setuppapersize[A4] > > \setuplayout[width=6cm] > > \setupquotation > [1] > [left=", right="] > > \setupquote > [1] > [left=", right="] > > \starttext > > \language[de] > Bereiche der\quotation{waren transparent, so dass} man auf. \quotation{die darunterliegenden} Grafiken sehen konnte. \quotation{Die Paletten konnten mit der} nicht-dominanten \quotation{Hand bewegt werden} %gibberish content > > \stoptext > > I'm using LiveTex 2011/LuaTex typeset but the problem can be reproduced using the example code athttp://live.contextgarden.net/ and the "XeTeX"-Setting. > > Is there any fix to this problem? >> You have to add \nobreak between the quotation mark and the text, e.g. >> >> \setupdelimitedtext[quotation][1][left=?\nobreak] >> >> but I can give you better answer when you tell use why do you want to change >> the delimiters as shown above because ? and ? are the default symbols for german >> when you use \quotation. >> >> Wolfgang > Hello, Thanks! That did the job as far as I can see. I did set the Quotation Marks manually since I considered to change them to Guillemets (?» «) later. Regards, Jan

2 1

10. BayTeX @ München (21st July at 2 p.m.)
by Mojca Miklavec 02 Jul '12

02 Jul '12

Hello, I'm forwarding invitation & call for papers for the 10th Bavarian TeX user meeting which will be held in Garching bei München in a bit less that three weeks. Talk proposals should be submitted until the end of the week (8th). The text below is in German only. I apologize for that, but I believe that it is of major interest for German-speaking users anyway (but if anyone would like to go and needs translation or extra information, feel free to contact the organizers). Mojca ---------- Forwarded message ---------- From: Leo Arnold <latex at arney.de> Date: 2012/7/1 Subject: [TeX-MUC] 10. BayTeX @ Munich: Kurz- & Tafelvorträge erwünscht Liebe TeXniker, die zehnte bayerische TeX-Konferenz wird am Samstag 21. Juli 2012, ab 14:00 Uhr in München stattfinden. Designierter Tagungsort ist das Fakultätsgebäude Mathematik/Informatik der TU München auf dem Forschungscampus in 85748 Garching bei München. Informationen zur Anmeldung, Anfahrt und zum Programm werden nach und nach auf der folgenden Website bekannt gegeben: http://www-m6.ma.tum.de/Lehrstuhl/BayTeX2012 ***** Call for Talks ***** Die Konferenz lebt von euren Vorträgen und da sie nur einen Nachmittag umfasst, freuen wir uns auch über kurze Vorträge von etwa 15 Minuten. Beamer ist dabei keine Pflicht, auch freie Vorträge, Vorträge mit Tafel & Kreide und Vorträge mit echten OHP-Folien sind möglich. Wir wollen diesmal unsere Gastgeber, also alle Mathematiker und Informatiker der TU München einladen, und ihnen zeigen, das TeX mehr als nur Mittel zum Zweck für wissenschaftliche Veröffentlichung ist. Wer also auf der BayTeX - eine interessante Anwendung von TeX in seinem Berufsalltag - einen speziellen Trick in TeX - ein neues TeX-package - typografische Regeln oder Details vorstellen möchte, meldet sich bitte bei mir unter LaTeX(a)arney.de . Wir wollen so viele Vorträge wie möglich unterbringen, ohne den zeitlichen Rahmen zu sprengen. Mit freundlichen GrüßŸen Leo Arnold i.V. Uwe Siart

1 0

[***SPAM***] quotationmarks just before new line
by d_jan 02 Jul '12

02 Jul '12

Hello, It frequently happens to me that a new line in an output-document starts just after a quotation mark. So I encounter lines in my ConTeX-created .pdf like: "And the prince of Denmark spoke: ' how weary, stale, flat, and unprofitable seem to me all the uses of this world!' " Its hard to say how often this happens but I'd say its roughly every 50 quotations. A minimal example to see the problem in action: (also on http://pastebin.com/cEMiGZju) \mainlanguage [de] \setuppapersize[A4] \setuplayout[width=6cm] \setupquotation [1] [left=„, right=“] \setupquote [1] [left=„, right=“] \starttext \language[de] Bereiche der\quotation{waren transparent, so dass} man auf. \quotation{die darunterliegenden} Grafiken sehen konnte. \quotation{Die Paletten konnten mit der} nicht-dominanten \quotation{Hand bewegt werden} %gibberish content \stoptext I'm using LiveTex 2011/LuaTex typeset but the problem can be reproduced using the example code at http://live.contextgarden.net/ and the "XeTeX"-Setting. Is there any fix to this problem? Kind Regards, Jan

2 1

latest beta problem?
by Alan Bowen 01 Jul '12

01 Jul '12

A file that used to process without complaint now fails because \definetext is not recognized . Do I need to revise my macros or is there a problem in the latest beta? Alan ***************************** ConTeXt ver: 2012.06.30 12:32 MKIV fmt: 2012.6.30 int: english/english system > cont-new.mkiv loaded (/Applications/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) fonts > latin modern fonts are not preloaded languages > language en is active (prd_Aestimatio_vol-09.tex{/Applications/ConTeXt/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) fonts > typescripts > unknown: library 'loc' {/Applications/ConTeXt/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/Applications/ConTeXt/tex/texmf/fonts/map/dvips/lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded (/Users/alancbowen/texmf/tex/context/Aestimatio/env_AestimatioMKIV.tex check > missing or ungrouped '=' after 'agr' in line 28 (28>en) check > missing or ungrouped '=' after 'en' in line 29 (28>agr) fonts > typescripts > unknown: library 'latin-modern' or 'latin' resolvers > modules > loaded: 'ancientgreek' (/Users/alancbowen/texmf/tex/context/third/greek/t-ancientgreek.mkiv loading > module ancientgreek (/Users/alancbowen/texmf/tex/context/third/greek/type-agr.tex)) colors > rgb color space is supported colors > cmyk color space is supported ! Undefined control sequence. system > tex > error on line 289 in file /Users/alancbowen/texmf/tex/context/Aestimatio/env_AestimatioMKIV.tex: Undefined control sequence ... 279 \setuphead[FMTitle][before={\vglue3pc}] 280 \setuphead[FMTitle][header=high,alternative=middle,style={\tfb\rm},footer={}] 281 282 283 %%%% Memorial 284 \definehead[MemTitle][title] 285 \setuphead[MemTitle][before={\blank[3*medium]}] 286 \setuphead[MemTitle][after={\blank[2*big]},align=middle,style={\tfa\rm}] 287 \setuphead[MemTitle][header=high,footer=MemTitlePage] 288 289 >> \definetext[MemTitlePage][footer] 290 [\vbox{\tfx 291 \vrule height6pt width0pt depth0pt\par 292 \centerline{\copyright\ \year\ Institute for Research in Classical 293 Philosophy and Science}\par 294 \centerline{All rights reserved}\par 295 \sc{issn 1549--4497} (online)\hfil 296 \sc{issn 1549--4470} (print)\hfil 297 \sc{issn 1549--4489} (\sc{cd{-}rom})\par 298 \PublicationData\hfill 299 } \m_syst_action_yes ...rs_seventuple_empty_one_yes \page_layouts_define_text <to be read again> [ l.289 \definetext[ MemTitlePage][footer] ? *****************************

3 3

Problems with \completecontent
by Marcin Borkowski 01 Jul '12

01 Jul '12

Hi, I'd like to make the distance between the chapter number and the title (and between the title and pagenumber with alternative=a) smaller. How to do that? [distance=0.5em] didn't work. Also, I'd like to have the pagenumbers slanted; I tried [pagestyle=slanted], but it didn't work either. Any ideas? -- Marcin Borkowski http://mbork.pl

2 1

Two questions about buffers
by Marcin Borkowski 30 Jun '12

30 Jun '12

Hello, I have two questions concerning buffers. 1. What is the difference between \grabbufferdata and \dostartbuffer? 2. I wanted to use buffers to define my own "environment" (as Wolfgang suggested to me a few days ago). However, there's a problem with \baselineskip; here is an example: \starttext \def\startMyEnv{\dostartbuffer[MyEnv][startMyEnv][stopMyEnv]} \def\stopMyEnv{{\tfxx\getbuffer[MyEnv]\par}} \input tufte \startMyEnv \input knuth \stopMyEnv \input tufte \stoptext Am I doing something wrong here? TIA -- Marcin Borkowski http://mbork.pl

3 3

itemize in two columns and pagebreaks
by Marcin Borkowski 30 Jun '12

30 Jun '12

Hello, I encountered a weird problem with \startitemize[columns] Namely, sometimes ConTeXt (MkIV) puts a pagebreak before the itemization. I tried to distill the problem to a minimal example, until now without success, but I'll post a ME if I'm able to reproduce a problem in a small file. Anybody encountered this, too? Are there any solutions/workarounds known? Best, -- Marcin Borkowski http://mbork.pl

3 6

List without bullets
by Gilbert Houtekamer 30 Jun '12

30 Jun '12

Hi, I am would like to make \startitemize list with \head that has no bullets, e.g. Topic My text for topic Another Topic Text for another topic. With \startitemize and \head I get bullets before "Topic" and "Another Topic", how can get rid of these? Thanks! Gilbert Houtekamer

3 4

Broken Nightly?
by Kip Warner 29 Jun '12

29 Jun '12

Hey list, I'm using ConTeXt 2012.06.25 and I noticed a broken compilation of my book: ! Undefined control sequence. <argument> \@@efinteraction \doifnot #1#2->\edef \m_syst_string_one {#1 }\edef \m_syst_string_two {#2}\if... <argument> \doifnot \@@efinteraction \v!none \grph_epdf_add_overlay \firstofoneargument #1->#1 <inserted text> ...v!none \grph_epdf_add_overlay } \fi \grph_include_finalize ...nalfigurepostprocessors \edef \p_reset {\externalf... ... l.42 ...eativecommons.org/licenses/by-nc-sa/3.0/)] ? E You want to edit file Handbook.tex at line 42 The actual file can be found here: <https://bazaar.launchpad.net/~avaneya/avaneya/trunk/view/head:/Documentatio…> -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

3 11

new beta
by Hans Hagen 28 Jun '12

28 Jun '12

Hi, I just uploaded a beta that can have some issues due to cleanup of one of the core support modules. Nothing serious probably. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

cikada, a presentation tool
by Li Yanrui (李延瑞) 28 Jun '12

28 Jun '12

Hi, I write a presentation tool for PDF documents based clutter and poppler. welcome to try it. the english manual, see https://github.com/liyanrui/cikada/blob/master/doc/cikada-manual-en.pdf the project page: https://github.com/liyanrui/cikada -- Best regards, Li Yanrui (李延瑞)

1 0

beta
by Hans Hagen 27 Jun '12

27 Jun '12

Hi, I uploaded a new beta. In the process of cleanup I kicked out some of the supp-* modules, most noticeably the visual debugger. That one has been replaced by another mechanism and a merge of some functionality already present in modules (and more might be moved into it). As they are often used for testing, \ruledhbox, \ruledvbox and \ruledvtop remained and all the others have been replaced by placeholders (and might go away). The \show* commands are mostly dummies (and will disappear) but these remain: \showmakeup \showallmakeup \showstruts \showglyphs Hopefully this doesn't spoil your playing with low level tex stuff. The good news is that the current implementation provides more detail, is more colorful, and comes on (pdf) layers (so that you can hide categories). \showallmakeup \starttext \ruledhbox{hbox} \blank \ruledvbox{vbox} \blank \ruledvtop{vtop} \blank {\definedfont[Serif*default at 30pt] g ff} \blank test \strut test \blank \input ward \par \stoptext You can use \enabletrackers[visualizer.*] with * being fontkern, kern, glue, penalty, hbox, vbox, all, reset, makeup, whatsit, and glyph. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

5 8

How to obtain a Polish en-dash?
by Marcin Borkowski 27 Jun '12

27 Jun '12

Hello, in Polish we usually use "--" as a dash (between different parts of a sequence, for instance), but we surround it by thin spaces (and the left one is "hard", like "~"). Is there a way in ConTeXt (MkIV) to obtain this behavior using some "tricky" syntax (like |--| or just -- surrounded by spaces) or is it better to define a custom command, like \def\Polishdash{\unskip\kern 0.2em--\hskip 0.2em\ignorespaces} (this is more or less taken from LaTeX's suite for Polish typesetting)? Best, -- Marcin Borkowski http://mbork.pl

2 1

\placeregister[index]—preventing page break before
by Alan Bowen 27 Jun '12

27 Jun '12

I have been experimenting for a while with \placeregister and \setupregister and can find no way no prevent page breaks before a register. Simply inserting \page[no] does not seem to work. So can anyone suggest a way to do this in MKII? Alan

1 1

A problem with modes
by Marcin Borkowski 27 Jun '12

27 Jun '12

Hello, this doesn't work for me: \definestartstop[amode][before={\startmode[a]}, after={\stopmode}] \starttext All modes. \startamode ``A'' mode. \stopamode \stoptext Can I use \startmode with \definestartstop? Or is there a better way to do something like this? TIA -- Marcin Borkowski http://mbork.pl

3 4

[callbacks] proper registration, node subtypes
by Philipp Gesang 26 Jun '12

26 Jun '12

Hi all, I need a (pre-linebreak) callback to behave the same way with the Context and Plain formats. *The sequence that nodes are traversed in is very important.* Afaict the callback will have to be registered as a “processors”/“before” nodes task. However, the behavior is not identical: 1. If the list contains a vlist or hlist, the callback is applied first on the inner list and then on the outer list. (Guess: it’s applied on the hpack_filter as well?) 2. In Plain, glyph nodes have subtype 0 (GLYPH_CHARACTER), while in Context it’s 1 (GLYPH_LIGATURE). Example code is appended. Questions: - Which node task gets me a behavior similar to the raw pre_linebreak_filter?[*] - Does the difference wrt node subtype matter assuming I only (a) copy glyph nodes and (b) manipulate their .char field? Any insights on this matter would be greatly appreciated. Regards Philipp [*] If this is not possible|recommended, what would a clean solution look like?

2 5

Typing of Indian texts.
by Jaroslav Hajtmar 26 Jun '12

26 Jun '12

Hello ConTeXist. During the discussion in CSTeX maillist fell a question about possibility typing of Indian texts with use ConTeXt. (using of Indian OpenType fonts), which is not yet in LuaTEX. Is somewhere any information available on this issue? I rate myself with no experience of exotic texts. I want get answer for my colleague in CsTeX conference, who wants to start ConTeXt use for these purposes.. Thanx Jaroslav Hajtmar

2 1

UTF8 in XML
by Meer, H. van der 25 Jun '12

25 Jun '12

Can someone explain why the "element-of" is not printed when directly put into the source, but only if introduced through TeX-math? The input file is in UTF-8 and in the texteditor the character does appear. Example: \setuppapersize[A6][A6] \starttext \start \setupbodyfont[lucidaot] Requested font = lucidaot:\crlf tex math = "$\in$"\crlf directly = "∈" (U+2208, UTF-8 = E2 8888) \par \stop \start \setupbodyfont[lmodern] Requested font = lmodern:\crlf tex math = "$\in$"\crlf directly = "∈" (U+2208, UTF-8 = E2 8888) \par \stop \stoptext \showbodyfont \stoptext Hans van der Meer

2 2

mathml fails
by Meer, H. van der 25 Jun '12

25 Jun '12

>From the MathML prime I tried this example from page 74: <math xmlns="http://www.w3c.org/mathml" version="2.0"> <semantics> <apply> <eq/> <ci> e </ci> <apply> <times/> <ci> m </ci> <apply> <power/> <ci> c </ci> <cn> 22 </cn> </apply> </apply> </apply> <annotation encoding="tex"> e = m c^2 </annotation> </semantics> </math> It typesets nothing, same for encoding "context", same for "TeX", same for "ConTeXt". Anything else takes the mathml and gives the result. Why is the <semantics><annotation encoding="tex"> not working? Hans van der Meer

1 0

Sanskrit font
by Martin Fechner 25 Jun '12

25 Jun '12

Hey list, does anybody know an useable font for sanskrit writings another then sanskrit2003.ttf? It is preferred to have the same range (with ligatures etc.) as the sanskrit2003.ttf. Best regards, Martin

7 12

font troubles
by Henning Hraban Ramm 24 Jun '12

24 Jun '12

Ahoj, the following example works on itself, but not in the environment of my current project: \starttypescript [handwriting] [devroye] \definefontsynonym [Devroye] [file:devroye] [features=default] \stoptypescript \starttypescript [handwriting] [devroye] [name] \definefontsynonym [Handwriting] [Devroye] [features=default] \stoptypescript \definetypeface [test] [rm] [serif] [schoolbook] [default] \definetypeface [test] [hw] [handwriting] [devroye][default] \definefont [TitelFont][Handwriting at 16pt] \setupbodyfont[test,rm,8.5pt] \starttext {\TitelFont Test} \input knuth {\hw Don Knuth} \stoptext In the project, I get the hw font, but the body font is LM Roman 12pt. I get TeX Gyre Schola only if I use \setupbodyfont[schoolbook,rm,8.5pt], but that fails as soon as I define \definetypeface [schoolbook] [hw] [handwriting] [devroye][default] – in the minimal example that works, too. Can you explain? Greetlings, Hraban

2 2

Math integral bug in the latest beta
by Otared Kavian 24 Jun '12

24 Jun '12

Dear Hans, I noticed that with the latest beta (version 2012.06.22 11:22) there is an issue with the distance of bounds in integral signs. More precisely trying the following minimal example \starttext \input ward\par \startformula \int_{\Omega}f(x)dx = 1 = \sum_{n=1}^\infty a_{n} \stopformula \stoptext one gets the PDF available at http://dl.dropbox.com/u/4316076/math-integral-bug.pdf while with a previous version of mkiv (2011-11-29) one has the correct ouput, as one may see here http://dl.dropbox.com/u/4316076/math-integral-2011-11-29.pdf Note that \Omega is too far away from the integral sign with mkiv version 2012-06-22. Best regards: OK

1 0

Space Between Number and Reference
by Kip Warner 22 Jun '12

22 Jun '12

Hey list, I am dumping all of my references into an appendix with the following: \placepublications[criterium=all] It works great for references 1 to 9, but anything longer than a single digit and the actual reference text just ends up being superimposed over it instead of shifting over. I'm guessing there is a setup for this somewhere. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

3 3

[OT] handmadefont
by luigi scarso 22 Jun '12

22 Jun '12

http://www.handmadefont.com/ -- luigi

1 0

how to change footnote body number
by Pablo Rodríguez 22 Jun '12

22 Jun '12

Hi there, I'm trying to change the format of the footnote numbers in the body (not in the lower area for footnotes) and I don't know how to do this. Here you have a sample: \definefontfeature[oldnumb][onum=yes] \setupnotation[footnote][numberstyle=\tf,numbercommand=\addfs{oldnumb}] \starttext Note\footnote{Not here, but above.} \stoptext Just in case you wonder, the OT feature is actually sups=yes, but that feature only works with Sorts Mill Goudy (http://www.theleagueofmoveabletype.com/sorts-mill-goudy) How is the proper way to do this? Many thanks for your help, Pablo -- http://www.ousia.tk

3 3

upload
by Hans Hagen 22 Jun '12

22 Jun '12

Hi, I uploaded a new beta (still no current). Some more core modules have been cleaned up (so Wolfgang cum suis have to do more checking). I also changed the status-mkiv.pdf document and added columns for 'reference', 'wiki' and 'manuals' so that we can keep track of what is done. Hopefully someone (other than me) will provide the right info for that (goes in status-mkiv.lua). Some 64 modules to go. When all the tex code is done, I'll go over the lua code. When all that is done, we have to hope a rather clean repository (Mojca is working in that) and starting point for the real challenges. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 3

xtable
by Meer, H. van der 22 Jun '12

22 Jun '12

Can one put individual horizontal and vertical lines between rows/columns in xtable? Just like for example \HL in \starttable? The workings of parameter spaceinbetween on \startxtable remain a mystery to me. Can someone enlighten me? Hans van der Meer

2 4

[OT] Endangered languages
by luigi scarso 22 Jun '12

22 Jun '12

http://www.endangeredlanguages.com/ http://googleblog.blogspot.it/2012/06/endangered-languages-project-supporti… -- luigi

2 2

PDF links wrong on Windows
by Steffen Wolfrum 21 Jun '12

21 Jun '12

Hi, I just finished a book project with MkIV vers. 2012.04.14 00:10. When opening the PDF on Mac, all bookmarks link to the correct page. when opening the PDF on Windows, all bookmarks link to a wrong page (page number plus one). Is this a know issue? Thanks, Steffen

3 4

The bTABLE is still broken in latest beta
by Hongwen Qiu 21 Jun '12

21 Jun '12

The bTABLE is still broken in latest beta. Minimal example: \starttext \setupTABLE[c][each][width=1cm] \bTABLE \bTR\bTD Test \eTD\eTR \eTABLE \stoptext Error log: ! Missing number, treated as zero. system > tex > error on line 5 in file test.tex: Missing number, treated as zero ... 1 \starttext 2 \setupTABLE[c][each][width=1cm] 3 \bTABLE 4 \bTR\bTD Test \eTD\eTR 5 >> \eTABLE 6 \stoptext 7 <to be read again> \275>2:1 <argument> ...n \tabl_ntb_get_aut \c_tabl_ntb_col \relax \ifdim \localwidth ... \secondoftwoarguments #1#2->#2 \tabl_ntb_cell_process ...\tabl_tnb_cell_finalize }}\scratchdimen \tabl_ntb_... <inserted text> ...align_start \tabl_ntb_pass 1 1 \tabl_ntb_column_next \tab... \tabl_ntb_flush_content ...p \cr \the \t_tabl_ntb \dostoptagged \egroup \dos... ... l.5 \eTABLE ?

2 1

**SPAM** ConTeXt breaks pdfcrop
by S Barmeier 21 Jun '12

21 Jun '12

I guess this has to do with my path variables, but having context minimals installed prevents pdfcrop from running successfully: PDFCROP 1.33, 2012/02/01 - Copyright (c) 2002-2012 by Heiko Oberdiek. kpathsea: Running mktexfmt pdftex.fmt /usr/local/texlive/2010/bin/x86_64-linux/mktexfmt: 395: /usr/local/texlive/2010/bin/x86_64-linux/mktexfmt: /home/user/context/tex/texmf/texconfig/tcfmgr: not found fmtutil: config file `fmtutil.cnf' not found. !!! Error: pdfTeX run failed! Does anybody have a suggestion of how to deal with this issue successfully? Thank you. Severin P.S.: I'm on ubuntu 12.04.

3 5

Input path to include external files with vim module
by Marco 20 Jun '12

20 Jun '12

Hi, does the vim module have a feature to specify the input path, similar to \usepath for context files or \setupexternalfigures [directory=…] for graphics? I'm looking for a solution not to hard-code paths into my files. Example: \usemodule [vim] \definevimtyping [XML] [syntax=xml] \starttext \typeXMLfile{code/foo.xml} % what I do now %\typeXMLfile{foo.xml} % what is desired \stoptext Marco

3 6

ConTeXt and SciTE
by Bill Meahan 20 Jun '12

20 Jun '12

I'm trying to get the SciTE lexers that come with the ConTeXt distribution working but I'm not having much luck. SciTE certainly processes the ConTeXt start-up script but never does any highlighting. I always get the warning that lpeg is not loaded but I cannot find any separate lpeg.properties file or lpeg.lua file so I don't know how to get it imported and active to run the lexers. Any suggestions? Interestingly, the lexers work just fine in Textadept but I haven't quite figured out how to get them to load automatically. I have to manually select the lexer but it works fine once I do. I'm inclined to go the Textadept route and build a nice snippets file and Adeptsense support but I'd like to see things running in SciTE, too. Right now I'm using Emacs to do my editing but AUCTeX does a poor job of supporting ConTeXt and when I asked about future plans on the AUCTeX mailing list, I got a snarky, sarcastic reply that "code doesn't change itself." Typical FSF attitude, I see. If I'm going to have to write my own support, Lua is much closer to the languages I've used before than elisp so it should be considerably easier. Of course, I'll pass on anything I come up with to the ConTeXt community. -- Bill Meahan K8QN "The pessimist complains about the wind; the optimist expects it to change; the realist adjusts the sails." -- William Arthur Ward This message is digitally signed with an X.509 certificate to prove it is from me and has not been altered since it was sent.

4 18

upload
by Hans Hagen 20 Jun '12

20 Jun '12

Hi, I uploaded a version that has the bTABLE mechanism reorganized (different low level names etc). Hopefully nothing got broken in the process. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 2

[OT]...I'm sorry for the others, really.
by luigi scarso 19 Jun '12

19 Jun '12

http://wiki.contextgarden.net/User:Luigi.scarso/knuth -- luigi

3 2

combined style?
by Meer, H. van der 19 Jun '12

19 Jun '12

I had hoped to be able to combine style features in parameters, in this manner: \macro[param={a,b}]. Doing this with foregroundstyle did not work, see the following examples: \framed[foregroundstyle=italic]{ABCD} => typesets in italic \framed[foregroundstyle=small]{ABCD} => typesets small \framed[foregroundstyle={small,italic}]{ABCD} => typesets not in small-italic but first "small,italic" followed by the framed ABCD Of course the effect wanted can be obtained by \framed[foregroundstyle={\tfx\it}]{ABCD} But my problem is the fact that I would like to use style settings from within XML-nodes in the following manner: <node style="small,italic"> leading to somewhere a call of \setupsomething[foregroundstyle={small,italic}]. It is a pity that <node style="small" style="italic"> does not work, because with two successive calls \setupsomething[foregroundstyle=small] \setupsomething[foregroundstyle=italic] the first setting is lost. Translating internally smallitallic to \tfx\it is a remote possibility, but then each and every combination has to be provided for. There are simply too many of them if one wants to combine size (small,large) type (mono,calligraphic,serif,sansserif) and (bold, italic, slanted, normal). Is there a solution? Hans van der Meer

2 1

setupinteraction and macroexpansion
by Andreas Schneider 19 Jun '12

19 Jun '12

Hello, I'm a bit lost with macro expansion here. I try to use some macros to set the title (and subject) of the PDF document. The attached minimal example shows what I want to achieve. I tried def, edef, gdef, define, explicit expand, expandoneafter, etc. etc. without any success. Whatever I do, the title field in the PDF metadata always contains the raw "\date..." command instead of the formatted date. Any suggestions? -- Best Regards, Andreas

2 3

\box0 to Lua
by Procházka Lukáš Ing. - Pontex s. r. o. 19 Jun '12

19 Jun '12

Hello, (my apologies if this message is duplicated - our mail server was out-of-order some time) how to call "\box0" and "\hbox to3cm{abc}" by Lua? ---- \startluacode context[[\box0]] % OK but a "nicer" way preferred, so keep on trying - context.box(0) % Error context.box{0} % Error context.box"0" % Error context.hbox({to = "cm"}, "abc") % Error \stopluacode ---- TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

4 7

Strange page breaks
by Andreas Schneider 19 Jun '12

19 Jun '12

Hello, the attached example causes very strange page breaks. 1. The subsubsubject is the last line on the first page. That doesn't look very nice. 2. The xtable is broken although the whole table fits on that page. Is there anything I (or you? :-)) can do about these two problems? #This is LuaTeX, Version beta-0.70.2-2012052100 (TeX Live 2012/W32TeX) #ConTeXt ver: 2012.05.24 19:36 MKIV fmt: 2012.6.18 int: english/english -- Best Regards, Andreas

3 4

Is it possible to generate eps files using metafun and context?
by Hongwen Qiu 19 Jun '12

19 Jun '12

Hi, Is it possible to typeset the label with context and generate eps output files using the metafun format? If yes, then how? TIA.

2 2

horizontal spacing between only two rows
by Helmut Schwertner 18 Jun '12

18 Jun '12

Hello, in the following example it is possible to split a table vertical (between the first and the second column with (\startxcell[distance=5pt] test \stopxcell). \starttext \startxtable[option={stretch,width}] \startxrow \startxcell[distance=5pt] test \stopxcell \startxcelltest \stopxcell \startxcelltest \stopxcell \stopxrow \startxrow \startxcelltest \stopxcell \startxcelltest \stopxcell \startxcelltest \stopxcell \stopxrow \startxrow \startxcelltest \stopxcell \startxcelltest \stopxcell \startxcelltest \stopxcell \stopxrow \stopxtable \stoptext But how can I get horizontal spacing between "only" two rows, and not for the whole table? Thank you, Helmut -- ******************************************************** Helmut Schwertner 28201 Bremen eMail: helmut.schwertner(at)gmx.de

1 0

\box0 to Lua
by Procházka Lukáš Ing. - Pontex s. r. o. 18 Jun '12

18 Jun '12

Hello, how to call "\box0" and "\hbox to3cm{abc}" by Lua? ---- \startluacode context[[\box0]] % OK but a "nicer" way preferred, so keep on trying - context.box(0) % Error context.box{0} % Error context.box"0" % Error context.hbox({to = "cm"}, "abc") % Error \stopluacode ---- TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

1 0