- ntg-context - Mailing Lists

incrementnumber vs. prefixsegments
by plink 21 Nov '12

21 Nov '12

Hi, i'm trying to combine two features that somehow don't fit together: 1. figure numbering and referring using a chapter.fignr scheme. For this, a setup with \setupcaption[figure][prefix=yes,way=bychapter,prefixsegments=chapter] works fine, as long as i don't have 2. untitled entries below chapter (aka subject or subsubject), that also have to occur in the table of contents. For this, e.g. using \setuphead[subject][incrementnumber=list] \definecombinedlist[content][title,chapter,section,subject] does the trick, but then the figure number prefix gets eaten up at figures in subjects. I'd be glad if anybody could give me a hint on how to solve this. ConTeXt ver: 2012.10.30 21:13 MKIV Below a maximin example. Commenting out the \setuphead line gives back the prefix, but then there is no more subject in the toc, as to be expected: \setuphead[chapter][page=no,continue=yes] \setupcaption[figure][ prefix=yes, way=bychapter, prefixsegments=chapter] \setuphead[subject][incrementnumber=list] \definecombinedlist[content][title,chapter,section,subject] \starttext \placecontent \chapter{Chapter} \section{Section Een} \placefigure[here][fig:a]{figure a}{\externalfigure[cow.pdf][width=1cm]} Figure \in[fig:a] = 1.1\crlf Figure \in[fig:b] = 1.2?\crlf Figure \in[fig:c] = 1.3\crlf \subject{Subject} \placefigure[here][fig:b]{figure b}{\externalfigure[cow.pdf][width=1cm]} Figure \in[fig:a] = 1.1\crlf Figure \in[fig:b] = 1.2?\crlf Figure \in[fig:c] = 1.3\crlf \section{Section Twee} \placefigure[here][fig:c]{figure c}{\externalfigure[cow.pdf][width=1cm]} Figure \in[fig:a] = 1.1\crlf Figure \in[fig:b] = 1.2?\crlf Figure \in[fig:c] = 1.3\crlf \stoptext

2 1

Re: [NTG-context] Section alone on the page
by "H. Özoguz" 21 Nov '12

21 Nov '12

Am 21.11.2012 13:10, schrieb ntg-context-request(a)ntg.nl: > And I can not layout with > gridset=yes, too. Sorry: I mean "I can not layout withOUT gridset=yes, too.", of course. Huseyin

1 0

underbar/margin text
by Daniel Schopper 21 Nov '12

21 Nov '12

Hi, I have to typeset some underlined text with margin notes by its side. Is there a way to prevent the notes themself to get underlined? I tried putting the note-command in a group, simplifying its content etc. (In my real file I use \defineinmargin, btw.) \starttext \underbar{Test Test Test\footnote{footnote}~Test Test Test\par Test\inleft{marginal} Test Test Test Test Test \par} \stoptext (As one can see, there’s also an issue with the footnote-sign breaking the continued line, which is not urgent for me, at least by now.) Cheers, Daniel

4 9

Indented footnotes in ConTeXt
by "H. Özoguz" 21 Nov '12

21 Nov '12

Am 21.11.2012 08:50, schrieb ntg-context-request(a)ntg.nl: > Message: 1 > Date: Tue, 20 Nov 2012 14:28:11 -0600 > From: Adam Khan<loyalchap(a)gmail.com> > To:ntg-context@ntg.nl > Subject: [NTG-context] Indented footnotes in ConTeXt > Message-ID: > <CAAAgs1CcxeJ9Dr2MqNb1JdD3N1Pv3=Yju=GE=uJO6zVwGVrwhQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Greetings! > > I am writing a German critical edition in which I am using endnotes, and I > am encountering severe difficulties with formatting them as I should wish. > > The idea is to indent the entire footnote?marker and text?0.5in. > > In ConTeXt (Mark II) on XeTeX, I can move the footnote marker with this > set-up: > > \definenote[critical][conversion=characters, > way=bychapter, > location=text, > bodyfont=12pt, > margindistance=-.5in, > align=flushleft] > > Then I move the text by adding the unsightly but functional hack > \hskip.5into the beginning of the argument of > \critical or \criticaltext. Unfortunately, the endnotes do not flow from > page to page in Mark II, and, from the comments on the source code, it > appears that this cannot be helped. Given the length and number of > endnotes needed for my project, ConTeXt (Mark II) on XeTeX does not seem > viable. > > In ConTeXt (Mark IV) on LuaTeX, on the other hand, the endnotes do flow > from page to page, but the formatting does not appear to respond to the > margindistance key. From various related posts, the answer appears to lie > in \setupnotation, but, whenever I attempt to pass this command, I get an > ?undefined control sequence? error. > > In short, my question is, How do I code indenting each endnote .5in with > the highest degree of automation and fewest hacks possible? > > Sincerely yours, > Adam Khan You can try, what I use for footnotes, maybe this is what you want or helps? \setupnotation[footnote][ alternative=left, width=2em, numbercommand=\hskip1.6em\high] %Fußnoten werden eingerückt und Nummer hochgestellt Viel Erfolg. Huseyin

2 1

Re: [NTG-context] Spaces in commands
by "H. Özoguz" 21 Nov '12

21 Nov '12

Am 20.11.2012 16:02, schrieb ntg-context-request(a)ntg.nl: > There is also, the not to be advertised command:), \autoinsertnextspace. > > Aditya Thansk for this one! Huseyin

2 1

Re: [NTG-context] Parameters for Texworks
by "H. Özoguz" 20 Nov '12

20 Nov '12

Am 20.11.2012 22:41, schrieb ntg-context-request(a)ntg.nl: > I've never used TeXworks, so I would appreciate it if you could check it. > Cheers, > Sietse Perfect, thank you! Huseyin

1 0

Indented footnotes in ConTeXt
by Adam Khan 20 Nov '12

20 Nov '12

Greetings! I am writing a German critical edition in which I am using endnotes, and I am encountering severe difficulties with formatting them as I should wish. The idea is to indent the entire footnote—marker and text—0.5in. In ConTeXt (Mark II) on XeTeX, I can move the footnote marker with this set-up: \definenote[critical][conversion=characters, way=bychapter, location=text, bodyfont=12pt, margindistance=-.5in, align=flushleft] Then I move the text by adding the unsightly but functional hack \hskip.5into the beginning of the argument of \critical or \criticaltext. Unfortunately, the endnotes do not flow from page to page in Mark II, and, from the comments on the source code, it appears that this cannot be helped. Given the length and number of endnotes needed for my project, ConTeXt (Mark II) on XeTeX does not seem viable. In ConTeXt (Mark IV) on LuaTeX, on the other hand, the endnotes do flow from page to page, but the formatting does not appear to respond to the margindistance key. From various related posts, the answer appears to lie in \setupnotation, but, whenever I attempt to pass this command, I get an “undefined control sequence” error. In short, my question is, How do I code indenting each endnote .5in with the highest degree of automation and fewest hacks possible? Sincerely yours, Adam Khan P.S. In case something less obvious in my environment file is causing my difficulties, I attach it below: \startenvironment Formattierung \setuppapersize[letter][letter] \setuplayout[backspace=1.5in, topspace=1in, bottomspace=1in, cutspace=1in] \setupinterlinespace[line=5.6ex] \setupindenting[.5in] \indenting[always] \setupnarrower[left=0.5in, right=0in] \setupspacing[packed] \setupalign[right,broad,nothyphenated] \setuplinenumbering[step=1] \setuppagenumbering[way=bytext] \definenote[genetic] \setupnote[genetic][numberconversion=romannumerals, way=bychapter, location=text, bodyfont=12pt, align=flushleft] \definenote[source] \setupnote[source][numberconversion=set2, way=bychapter, location=text, bodyfont=12pt, align=flushleft] \definenote[critical] \setupnote[critical][numberconversion=characters, way=bychapter, location=text, bodyfont=12pt, margindistance=-.5in, align=flushleft] \definenote[annotation] \setupnote[annotation][numberconversion=numbers, way=bychapter, location=text, bodyfont=12pt, align=flushleft] \definenote[sociological] \setupnote[sociological][numberconversion=Romannumerals, way=bychapter, location=text, bodyfont=12pt, align=flushleft] \setupbodyfont[ss,12pt] \setuphead[chapter][ownnumber=yes] \def\broadcast{\rm} \def\callout#1{<#1>} \def\noteindent{\hskip.5in} \def\notepar{\\\hskip.5in} \def\original{\ss} \def\paratext{\tt} \def\quotationheader#1#2{{\noindenting\paratext#1]\wordright{[#2}}} \def\siglum#1{{\bf#1}} \def\someoneelse#1{{\it#1}} \stopenvironment

1 0

inright with location=hanging does not do what is expected.
by Bill Meahan 20 Nov '12

20 Nov '12

Apparently the listserver thought this was spam given my original subject lines contained a backslash, square brackets and curly brackets. :( Let's try this again: Maybe I'm reading the documentation (such as it is) wrong but I would expect specifying [location=hanging] to drop the margin text down alongside what follows instead of raising up to be even with what has preceded it. Minimal example: \starttext \input montgomery \inright[][align=right,location=hanging]{Shoulder Text} \input knuth \stoptext The "Shoulder Text" is aligned upward from the end of ward so it is alongside the ward quote. I would have expected it to be aligned downward alongside the knuth quote. Am I missing something? -- Bill Meahan Westland, Michigan USA

1 0

Parameters for Texworks
by "H. Özoguz" 20 Nov '12

20 Nov '12

Hi there, Im happy to have found the correct parameters for Texworks and MarkVI (and Standalone Context) after hours, wtih the kindly help of Hans and SciTE. They are: Programm: mtxrun Parameters: --script context --synctec $fullname Perhaps it would be useful to add this into the wiki, since there is only a guide in texworks for MarkIV. Thanks everybody. Huseyin

3 2

Bug?
by Willi Egger 20 Nov '12

20 Nov '12

Hi all! It appears to me, that there is a bug in transferring internal information: Suppose you have a large image. You need to squeeze this image into the width of 1 column in a two column environment. If the figure is placed with a fixed width it comes out as expect. If you use \textwidth or \makeupwidth the figure will not be sized correctly. \showframe % \definemixedcolumns[columns] % \setupcolumns % [distance=4mm] \starttext \startsimplecolumns \placefigure [middle] [Cow] {Cow width fixed-width} {\externalfigure[cow][frame=on,width=4cm]} \placefigure [middle] [Cow] {Cow with \type{\textwidth}} {\externalfigure[Pyramid][fame=on,width=\textwidth]} \placefigure [middle] [Cow] {Cow with \type{\makeupwidth}} {\externalfigure[Pyramid][frame=on,width=\makeupwidth]} \stopsimplecolumns \stoptext Willi

1 0

Spaces in commands
by "H. Özoguz" 20 Nov '12

20 Nov '12

Hi there, how to define commands, which are simply short-cuts for some terms? My attempt produces typographical mistakes: %%%%%%%%%%%%%%%%%% \def\testcmd{% Testcommand% } \def\testcmdtwo{% Testcommandtwo } \starttext This is a \testcmd. Everything ok. This \testcmd has no space after, but it should have. This \testcmdtwo has a space after. Everything ok. But this \testcmdtwo, produces one extra spaces after the comma. \stoptext %%%%%%%%%%%%%%%%%% Thank you. Huseyin

4 3

Equivalent of Includeonly?
by "H. Özoguz" 20 Nov '12

20 Nov '12

Is there an equivalent of the LaTeX "\includeonly" ? - I'm working on books (nearly only on books), so such a command would speed up my work. Huseyin

7 10

Re: Section alone on the page
by "H. Özoguz" 20 Nov '12

20 Nov '12

I got this eMail, and copy it here, maybe someone understands what changed and caused this Bug. ++++++++++++++++++ I looked at your not_so_short_example in ntg-context Digest, Vol 101, Issue 53, 18 November 2012, and I found that your problem, the section title alone at the bottom of a page, occurs only in some versions of the ConTeXt standalone, not in others. That on TeXLive will be OK (it was on my installation) My recent version of ConTeXt (14-11-2012) was not OK but some older versions (from march and may this year and even as recent as october 28) do not give your problem. For he others, I tried to avoid the problem by adding to your setup: \clubpenalty=10000 % keine Schusterjungen / no clubs (from Ubuch) \widowpenalty=10000 % keine Hurenkinder / no widows but that did not change anything, starngely enough. Maybe you could ask Hans Hagen or Wolfgang Schuster to have a look at the code and find out what's wrong. I hope this helps a little for the time being. +++++++++++++ Huseyin

2 1

Re: [NTG-context] Equivalent of Includeonly?
by "H. Özoguz" 20 Nov '12

20 Nov '12

Sorry, I did not get you. I was asking about Context, not Latex?! m 19.11.2012 12:00, schrieb ntg-context-request(a)ntg.nl: > see > http://projekte.dante.de/DanteFAQ/GrosseDokumente > if you are familiar with german. > > Suppose you have a 1500 pages document, but you really > work only on the 7th chapter which has 30 pages with lots > of references to other chapters/sectionb/images/.... > > with \includeonly{chap7} you get a 30 pages document but > with correct page numbers and correct references. > > With only \input chap7 you have wrong page numbers and > missing references > > Herbert

2 1

Re: [NTG-context] Parameters for Texworks
by "H. Özoguz" 20 Nov '12

20 Nov '12

Am 19.11.2012 23:23, schrieb ntg-context-request(a)ntg.nl: > feel free to update ... > > (wondering: does mtxrun --script texworks --start works ok?) > > Hans No, it does not. Huseyin

1 0

Suddenly can't run context
by Bill Meahan 19 Nov '12

19 Nov '12

Something has changed on my system and I can't find it. Perhaps someone can point me where I should look. I've had the texlive2012 installed since it came out and until a couple of days ago everything worked just fine. All of a sudden, things changed. I did nothing directly to the texlive distribution. wwm@escherton$ context --version gives the error output at the end of this note wwm@escherton$ sudo context --version works just fine wwm@escherton$ mtxrun --version works just fine as does mtxrun --script fonts --reload &c. I created a new user. context@escherton$ context --version works just fine I deleted the texlive distribution and re-installed it. No change. I've run sudo context --generate several times with no change in behavior. I've deleted the local .texlive2012 directory but since context won't run, it doesn't get recreated. I can set TEXMF and then context will run but it takes a much longer time than usual and the disk activity light is on almost solid. Any ideas? Linux Escherton 3.2.0-33-generic #52-Ubuntu SMP Thu Oct 18 16:19:45 UTC 2012 i686 i686 i386 GNU/Linux (XUbuntu 12.04) Error output below: wwm@Escherton$ context --version mtxrun | forcing cache reload resolvers | resolving | unknown configuration file '/home/wwm/texmf/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/bin/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/bin/texmf-local/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/texmf-local/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/texmf-local/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/bin/texmf/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/wwm/texmf/web2c/texmfcnf.lua' resolvers | resolving | unknown configuration file '/home/texmf/web2c/texmfcnf.lua' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-contexts.lua' resolvers | resolving | remembered file 'mtx-t-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'context.lua' mtxrun | unknown script 'context.lua' or 'mtx-context.lua' -- Bill Meahan Westland, Michigan USA

4 8

[***SPAM***] \inright[][location=hanging]{} does not do what is expected.
by Bill Meahan 19 Nov '12

19 Nov '12

Maybe I'm reading the documentation (such as it is) wrong but I would expect specifying [location=hanging] to drop the margin text down alongside what follows instead of raising up to be even with what has preceded it. Minimal example: \starttext \input montgomery \inright[][align=right,location=hanging]{Shoulder Text} \input knuth \stoptext The "Shoulder Text" is aligned upward from the end of ward so it is alongside the ward quote. I would have expected it to be aligned downward alongside the knuth quote. Am I missing something? -- Bill Meahan Westland, Michigan USA

1 0

\dorecurse and \startcombination
by Alan BRASLAU 19 Nov '12

19 Nov '12

Hello, Does anyone have a suggestion how to use \dorecurse within combinations? (without having to use lua...) Alan minimal example: \starttext \startcombination [2] \dorecurse{2}{{#1}{#1}} \stopcombination \stoptext ! Missing { inserted. system > tex > error on line 3 in file foo.tex: Missing { inserted ... 1 \starttext 2 \startcombination [2] 3 >> \dorecurse{2}{{#1}{#1}} 4 \stopcombination 5 \stoptext 6 <to be read again> \global \syst_helpers_recurse_x #1#2->\global \advance \outerrecurse \plusone \globa... l.3 \dorecurse{2}{{#1}{#1}} ?

1 0

Is it possible to arrange pages so that they fall alternating on two sides of the sheet?
by Marcin Borkowski 19 Nov '12

19 Nov '12

Hi all, I have something like this: \definepapersize[thin][width=210mm,height=74.25mm] \setuppapersize[thin][A4] \setuppaper[nx=1,ny=4] \setuplayout[topspace=1.5cm,backspace=1.5cm, header=0mm,footer=0mm, width=middle,height=middle] \setuparranging[XY] I'd like to have pages 1, 3, 5, 7 on one side of the A4 sheet, and 2, 4, 6, 8 on the other one. In other words, there should be two (A4-sized) pages in the pdf. (My use case is a short quiz for my wife's students - she wants to save paper;).) Bonus points for making pages 5-8 *identical* to pages 1-4, so that: on pages 1-2 (top of the A4 sheet, both sides) there is one problem set; on pages 3-4 (just below the previous one) there is another; on pages 5-6 (yet below) the first problem set is repeated; on pages 7-8 (bottom) the second one gets repeated again. TIA, -- Marcin Borkowski http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski Adam Mickiewicz University

2 1

Two columns in a frame
by Mari Voipio 19 Nov '12

19 Nov '12

Hi All, I'm doing something where the example at http://wiki.contextgarden.net/Columns#.28Simple.29Columns_in_a_narrow_frame would be quiet useful. Except that if I copy-paste the example in my ConTeXt, I get two columns typeset almost on top of each other, with non-existent column distance (a lot less than on the graphic in the wiki). Attached is what I get out of my ConTeXt, version 2012.05.30 11:26 MKIV BTW, the columns page doesn't seem to contain information on how to force a column break, at least not under that name.... I'm attaching a short version of the file where I'd need it. Being clueless again, thankful for any help, Mari

2 2

Re: [NTG-context] Equivalent of Includeonly?
by "H. Özoguz" 19 Nov '12

19 Nov '12

> > > >\startproduct mydocument > > > >\component one > >\component two > >\component three > >\component four > > > >\stopproduct > > > >Wolfgang I always use \input for the chapters of books - what is the difference to component? I looked into the wiki, but didn't get the difference. Huseyin

2 1

TeX files in fonts/ directory
by Aditya Mahajan 19 Nov '12

19 Nov '12

Hi, I am using ConTeXt standalone. Normally I unzip or git clone the fonts that I regularly use in $HOME/texmf/fonts/opentype/data directory, since I assume that all the extra files in there will simply be ignored by TeX. However, I recently noticed that MkIV finds a test.tex file from inside the fonts/ directory. In particular: $ luatools test.tex /home/adityam/texmf/fonts/opentype/data/euler-otf/tests/test.tex Should luatools only search for tex files inside $TEXMF/tex directories? Aditya

2 1

System variable HOME
by Procházka Lukáš Ing. - Pontex s. r. o. 19 Nov '12

19 Nov '12

Hello, it seems that Ctx [re]defines the system variable HOME on its run; compare: - command line: " C:\Lukas\Jobs\HubI-ISK.DSP\SO_210\Statics.Tx>set home Home=C:\Lukas HOMEDRIVE=C: HOMEPATH=\Documents and Settings\LPR " - and result of: ---- t-Home.mkiv \starttext \directlua{context(os.getenv("Home"))} \stoptext ---- -> C:/Documents and Settings/LPR Is it possible to avoid this substitution anyhow? - I'd need to keep (or access) the original value (= "C:\Lukas"). TIA. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

4 7

Re: [NTG-context] Section alone on the page
by "H. Özoguz" 18 Nov '12

18 Nov '12

Am 18.11.2012 21:58, schrieb ntg-context-request(a)ntg.nl: > When you uncomment the \setuphead setting in the following example context won?t move the heading > to the next page with the text after it, the important thing to achieve this is the ?preference? keyword in > \blank which permits the page break. > > %\setuphead[section][after={\blank[big,preference]}] > > \starttext > > \dorecurse{39}{Line \recurselevel\par} > > \section > > Another line > > \stoptext > > Wolfgang Thanks, but I think this one is not the problem. I have made this minexample: +++++++++++++++ \definepapersize[MyBook][A5] \setuppapersize[MyBook][A5] % Prints on paper the size of MyBook \usemodule [simplefonts][size=11pt] \setmainfont[Times New Roman][expansion=quality,protrusion=quality] \setuplayout[location=middle, topspace=1cm, bottomspace=1.5cm, width=middle, cutspace=1.3cm, backspace=1.8cm, height=fit, footer=1.2cm, grid=yes] \starttext \dorecurse{28}{Line \recurselevel\par} \section{Should not be alone} Blabliblub \stoptext +++++++++++++++++ I know: Does not look like an minexample, but was the only way to reproduce the issue. What could be the problem? Thanks Huseyin

1 0

\startplacefigure equivalent of \placefigure
by Romain Diss 18 Nov '12

18 Nov '12

Hi all, I did not find the \startplacefigure equivalent of: \placefigure [high,low] % <- here are the options I need {test} {\externalfigure[pic-test]} I checked in the sources but found nothing about these 'high', 'low' options. Anybody has an idea? Thanks in advance. -- Romain Diss <romain.diss(a)yahoo.fr>

2 2