- ntg-context - Mailing Lists

using different xml-tree's?
by H. van der Meer 13 Feb '13

13 Feb '13

I would like to process my <dvd> nodes in more than one way but I am stuck with the implementation. The trees could start in a different setup: \startxmlsetups xml:dvdfirst:dvd .. \stopxmlsetups \startxmlsetups xml:dvdfirst:setups \xmlsetsetup{\xmldocument} {error|setup|dvd .. and \startxmlsetups xml:dvdsecond:dvd .. \stopxmlsetups \startxmlsetups xml:dvdsecond:setups .. I thought I could call the variants (data collected in a buffer) with: \xmlprocessbuffer{dvd}{data.xml}{xml:dvdfirst:dvd} en \xmlprocessbuffer{dvd}{data.xml}{xml:dvdsecond:dvd} But this does not work. Neither for example ..{xml:dvdfirst} Guess I am mistreating the 3rd parameter of \xmlprocessbuffer{}{}{initial-xml-setup}. The manual says "process the tree starting with initial-xml-setup. What am I doing wrong? Hans van der Meer

1 0

Locating a figure
by Procházka Lukáš Ing. - Pontex s. r. o. 13 Feb '13

13 Feb '13

Hello, Ctx is not able to find a figure: ---- \starttext \setupexternalfigures[location=local,directory={4Essel}] \externalfigure[Dum-Poh.jpg] % Fails to find - Ctx uses a "dummy figure" \externalfigure[4Essel/Dum-Poh.jpg] % OK \stoptext ---- I'm running Ctx from c:\Lukas\Personal\Real\Ales with figures located in c:\Lukas\Personal\Real\Ales\4Essel\*.jpg What am I doing wrong? Best regards, Lukas (ConTeXt ver: 2012.11.26 13:31 MKIV fmt: 2012.11.27 int: english/english) -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

4 4

Re: [NTG-context] Justification
by Hans Hagen 12 Feb '13

12 Feb '13

On 2/12/2013 2:24 PM, Honza Hejzl wrote: > Hello, > > I am sorry I am not using mailing list now. > > Please, is there any way to use "full-justify" in context? It is a very > common typographic rule that if the last line of a paragraph is longer > (and closer) to its end than is the first-line indent ot the same > paragraph, it should be justified to the end of the line. In Scribus/InD > and so on there is typically "full-justify" option in formatting the > paragraph. > > Is there any way? > > Thanks in advance! > > Kind regards, Honza Hejzl > > P. S.: > > xxxx > xxxxxxx > xxxxxxx > xxxxx> \starttext \setupalign[verytolerant,stretch] \parfillskip\zeropoint \input tufte \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

\copypages and page numbers
by Troy Henderson 12 Feb '13

12 Feb '13

I have a scanned (raster) PDF that I am inserting into my document via \copypages. However, the document's page number is not showing on top of this raster PDF page (presumably because \copypages places the page on top of everything else). How can I ensure that the page number is on top of raster page instead of behind? Troy Henderson

1 0

Emoticons ;-)
by Matthias Weber 12 Feb '13

12 Feb '13

Dear all, I hope this doesn't get me banned from the ConTeXt list. What is the easiest/best way to add emoticons in ConTeXt as letters/symbols? In LaTeX, there is a package wasysym that gives \smiley and \frownie. It appears to be based at least partially on MetaFont code by Taco from 1998? I am aware that one can use images as characters as well, but I am looking for a cleaner solution. Incidentally (and irrelevant for my current purposes), my dream/nightmare would be to have animated emoticons in a PDF file. Is that at all possible? Thanks, Matthias

3 3

Alignment problem with labels and textext
by Lutz Haseloff 12 Feb '13

12 Feb '13

Hi Hans, hi all, with the most recent ConTeXt (This is LuaTeX, Version beta-0.75.0-2013021110 (rev 4576) ConTeXt ver: 2013.02.05 22:32 MKIV fmt: 2013.2.11 int: english/english) there is an alignment problem with labels using textext. Labels without textext work ok. Small example showing the problem: --------------------------------- \starttext \startMPpage pickup pencircle scaled 1mm ; path p ; p := fullcircle scaled 3cm ; draw p withcolor .625yellow ; label.rt (textext("right") , point 0 of p) ; label.top (textext("top") , point 2 of p) ; label.lft (textext("left") , point 4 of p) ; label.bot (textext("bottom") , point 6 of p) ; \stopMPpage \startMPpage pickup pencircle scaled 1mm ; path p ; p := fullcircle scaled 3cm ; draw p withcolor .625yellow ; label.rt ("right" , point 0 of p) ; label.top ("top" , point 2 of p) ; label.lft ("left" , point 4 of p) ; label.bot ("bottom" , point 6 of p) ; \stopMPpage \stoptext --------------------------------- Greetings Lutz

1 0

Big double quotes
by Devendra Ghate 11 Feb '13

11 Feb '13

Hello, I am trying to reproduce as closely as possible the large double quotes in the attached file. Though the actual glyph of the double quotes is not important for me (I have gone through the glyphs for CM without any success!), I would like to keep the double quotes large to attract attention to the quote. So I have essentially two problems: 1. Get a close enough glyph. I tried standard double quotes and also tried to use ′′ (U+02033) with context name *m: doubleprime*. But it doesn't produce anything. Please let me know if I am doing anything wrong. 2. Whatever may be the glyph, make is large. I have tried *\quotation* environment but it enlarges the text as well. I didn't see any option for enlarging *only* the quotation marks in *typo-del.mkiv*. So I tried to enlarge them myself. However, this leaves a large interlinespace before the last sentence. I would be grateful for any suggestions though outright solutions won't go remiss. Devendra *MWE* \setupdelimitedtext [quotation] [style={\tfc}] \definefont [quotesStyle] [Serif at 20pt] \starttext %\getnamedglyphdirect{modern}{m: doubleprime} %\getnamedglyphdirect{modern}{second} {\quotesStyle \symbol[leftquotation]}This would be interesting.This would be interesting.This would be interesting.This would be interesting.This would be interesting.This would be interesting.This would be interesting.This would be interesting.This would be interesting.{\quotesStyle \symbol[rightquotation]} \blank \startquotation This is would be interesting. \stopquotation \stoptext

3 3

No interaction for publications with author-year style
by Martin Rimmler 11 Feb '13

11 Feb '13

1 0

Repeating Headers for Tabulate not Working
by Malte Stien 11 Feb '13

11 Feb '13

Hello, I just looked up how to enable repeated headers in \starttabulate… \stoptabulate tables. It's explained here: http://wiki.contextgarden.net/Tabulate#Headers …but I am unable to make the minimal example work: \starttext \placetable[split,here][tab:ref]{Sometable} {\starttabulate[|w(.30\textwidth)p|w(.70\textwidth)p|] \HL \NC {\bf Animal} \NC {\bf Comment} \NC\FR \HL \dorecurse{50} {\NC Cat \NC Pretty cool \NC\MR} \NC Bear \NC Kind of lazy \NC\MR \NC Sheep \NC Always hungry \NC\MR \HL \stoptabulate} \stoptext Does that work for anyone else? What am I missing. Thank you, Malte.

1 1

Re: [NTG-context] Split \starttabulates
by Malte Stien 11 Feb '13

11 Feb '13

Hello, This is a bit old now, but I would like to come back to it. First of all, Marco, thank you for your response. I did try it and it does work. However, I seem to be loosing other things like adjusting the table width; things that \placetable provides. \placetable also has the advantage that I don't have to wrap it around my tables, it just appears at the beginning, not the end. A couple of points: - I tried to find some documentation about \startplacetable… \stopplacetable to see how I could enforce the width and generally to see what options there were. I could not find any, not even in the source code. How is this pair defined? - I also tried to find out the overall problem with \placetable. According to this page here: http://wiki.contextgarden.net/Floating_Objects the split option should work, but for TABLEs only. So, I think this does not work for me because I am using TABULATE, right? The split function in \setuptabulate works as well, but only if the table is not inserted using \placetable, that is as a float. So, \placetable knows how to split a TABLE but not a TABULATE although \starttabulate… \stoptabulate knows how to split itself. Is that right? But if it is not inserted as a float, I do not get a caption and I cannot refer to my table later on, right? There seem to be different ways of doing this, all of which miss out on some fine detail I need them to do. So, after all that rumbling, I guess, I am asking... …is there another way of: - placing a TABULATE table such that it has a caption that I can refer to; - split the TABULATE table across multiple pages; - and control the width of the TABULATE table. Thank you, Malte. On 03/10/2012, at 6:45 PM, ntg-context-request(a)ntg.nl wrote: > Hi Malte > >> \placetable[here][tab:some-table]{Some Table} >> \starttabulate[|w(.30\textwidth)p|w(.70\textwidth)p|] >> \HL >> \NC {\bf Animal} \NC {\bf Comment} \NC\FR >> \HL >> \NC Cat \NC Pretty cool \NC\MR >> \NC Bear \NC Kind of lazy \NC\MR >> \NC Sheep \NC Always hungry \NC\MR >> \HL >> \stoptabulate >> >> However, I need one of these tables to split over adjacent pages, which according to the documentation should be achievable with >> >> \setuptabulate[split=yes] >> >> However, that does not seem to work in connection with the \placetable line. > > \startplacetable [title=Some Table, reference=tab:some-table, location={split,here}] > \starttabulate[|w(.30\textwidth)p|w(.70\textwidth)p|] > \HL > \NC {\bf Animal} \NC {\bf Comment} \NC\FR > \HL > \NC Cat \NC Pretty cool \NC\MR > \NC Bear \NC Kind of lazy \NC\MR > \NC Sheep \NC Always hungry \NC\MR > \HL > \stoptabulate > \stopplacetable > > Marco

2 2

Typesetting LibreOffice (ODT) documents with ConTeXt
by Bill Meahan 10 Feb '13

10 Feb '13

I scoured the wiki and mailing-list without finding a definite answer. The most recent discussion I can find is from 2006 and at that time it was "possible" but nobody had yet developed the appropriate template, XSLT style-sheet, module or whatever to actually do it. For a number of reasons (including an absolute necessity to produce MS compatible .doc files) I need to maintain and write documents using LibreOffice Writer (or OO.org Writer) but the quality of the PDF files is, shall we say, not satisfactory. Exporting to LaTeX 2e is possible (and standard equipment in LO-W) but after using both for a while now, I vastly prefer ConTeXt. I could probably use something like the TEI tools to transform the ODT file to XHTML or TEI p5 and process that but I've found over many years such intermediate transformations have a lot of problems of their own. I don't need math support for /my/ work but I am sure others who do need it would like to follow the same route to great PDFs. Any solutions? -- Bill Meahan Westland, Michigan USA

9 20

\startplacefigure breaking paragraph flow
by Marcin Borkowski 10 Feb '13

10 Feb '13

Hi all, when I issue a \startplacefigure, it breaks the flow of the paragraph. Normally, it is not a problem (I can use 2*hang anyway), but I have a one-paragraph enumeration (made by \defineenumeration), and if I give the figure at its beginning, the "label" is on a line by its own; the problem is, I want the enumeration typeset by a block, and that's why I don't want to give the figure *before* the block. Here's a MWE: \defineenumeration[question][ text={\llap{$\blacktriangleright$~}Question}, right={.}, before={\blank[small]}, after={}, distance=0.5em, alternative=serried, width=fit, ] \defineblock[question] \defineblock[answer] \keepblocks[question] \hideblocks[answer] \setupblock[question][before=\startquestion,after=\stopquestion] \setupblock[answer][before=\startanswer,after=\stopanswer] \def\noanswer{\incrementnumber[answer]} \starttext \beginquestion This looks good. \input knuth \endquestion \beginquestion \startplacefigure[location={none,right,2*hang}] \framed{\tfd My figure} \stopplacefigure This looks bad. \input knuth \endquestion \stoptext Any suggestions? -- Marcin Borkowski room B3-46, phone no +48 61 829 5375 http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski Adam Mickiewicz University

2 1

mkiv in endless loop
by geert dobbels 10 Feb '13

10 Feb '13

Hello, I have been using context rather extensively until 2008 and then moved to another job where I did not use anything tex related. After those nearly 5 years, I decided to pick up context again. I wanted to try mkiv because the possibility of using openfonts looked interesting, so I made a tex file based on one that worked years ago, changed the font definitions to the texgyre fonts and gave it a try. The font defs seem to be ok (at least there are no error msges related to fonts) but after context gets through my tex file, it enters an endless loop which I have to interrupt. I checked the file over and over and cannot find any error. I tested a short "hello world" tex file, and that one worked fine. any clues on what could be going on here ? This is the log file after running context (shortened because it is a long one): (/home/geert/homologation/context/tex/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2013.02.05 22:32 MKIV fmt: 2013.2.8 int: dutch/dutch system > cont-new.mkiv geladen (/home/geert/homologation/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > files > jobname: R79_OVA, input: R79_OVA, result: R79_OVA fonts > latin modern fonts are not preloaded languages > taal nl is actief (R79_OVA.tex{/home/geert/homologation/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) fonts > typescripts > unknown: library 'loc' {/home/geert/homologation/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/home/geert/homologation/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map} fonts > fallback modern rm 12pt wordt geladen % begin of command line arguments % % kindofrun = 1 % fulljobname = ./R79_OVA.tex % no-parse-first-line = true % input = ./R79_OVA.tex % currentrun = 1 % % end of command line arguments % begin of command line files % % 1 ./R79_OVA.tex % % end of command line files (../homolo.tex) floatblocks > volgorde verstoord floatblocks > 1 geplaatst backend > xmp > using file '/home/geert/homologation/context/tex/texmf-context/tex/context/base/lpdf-pdx.xml' <Fotos/star.jpg> pages > flushing realpage 1, userpage 1 Overfull \hbox (11.99997pt too wide) in paragraph at lines 23--27 [][][] \hbox(10.88643+19.35356)x483.69684, direction TLT .\whatsit ..\localinterlinepenalty=0 ..\localbrokenpenalty=0 ..\localleftbox=null ..\localrightbox=null .\hbox(0.0+0.0)x0.0, direction TLT .\hbox(10.88643+19.35356)x495.69681, direction TLT ..\hbox(10.88643+4.23357)x56.9055, direction TLT ...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT [] ..\glue 11.99997 ..\hbox(10.88643+19.35356)x426.79134, direction TLT ...\vbox(0.0+30.23999)x426.79134, shifted -10.88643, direction TLT [] .\penalty 10000 .\glue(\parfillskip) 0.0 plus 1.0fil .etc. SHORTENED Overfull \hbox (40.59882pt too wide) in paragraph at lines 79--81 [][][] \3>corpo-10pt-rm-tf-0-a-0 In over-een-stem-ming met EG Richt-lijn 76/114*78/507 \hbox(10.88643+4.23357)x213.39566, glue set - 1.0, direction TLT .\whatsit ..\localinterlinepenalty=0 ..\localbrokenpenalty=0 ..\localleftbox=null ..\localrightbox=null .\hbox(0.0+0.0)x0.0, direction TLT .\hbox(10.88643+4.23357)x0.0, direction TLT .\penalty 10000 .\glue 0.0 .etc. Overfull \hbox (15.91484pt too wide) in paragraph at lines 79--81 \3>corpo-10pt-rm-it-0-a-0 In ac-cor-dan-ce with EC Di-rec-ti-ve 76/114*78/507 \hbox(8.23198+0.216)x213.39566, glue set - 1.0, direction TLT .\3>corpo-10pt-rm-it-0-a-0 I .\3>corpo-10pt-rm-it-0-a-0 n .\glue 3.0 plus 1.5 minus 1.0 .\3>corpo-10pt-rm-it-0-a-0 a .\3>corpo-10pt-rm-it-0-a-0 c .etc. Overfull \hbox (23.99992pt too wide) in paragraph at lines 75--81 [][][] \hbox(10.88643+49.59355)x483.69684, direction TLT .\whatsit ..\localinterlinepenalty=0 ..\localbrokenpenalty=0 ..\localleftbox=null ..\localrightbox=null .\hbox(0.0+0.0)x0.0, direction TLT .\hbox(10.88643+49.59355)x507.69676, direction TLT ..\hbox(10.88643+4.23357)x56.9055, direction TLT ...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT [] ..\glue 11.99997 ..\hbox(10.88643+49.59355)x213.39566, direction TLT ...\vbox(0.0+60.47998)x213.39566, shifted -10.88643, direction TLT [] ..\glue 11.99997 ..\hbox(10.88643+49.59355)x213.39566, direction TLT ...\vbox(0.0+60.47998)x213.39566, shifted -10.88643, direction TLT [] .\penalty 10000 .\glue(\parfillskip) 0.0 plus 1.0fil .etc. SHORTENED Overfull \hbox (11.99997pt too wide) in paragraph at lines 108--112 [][][] \hbox(10.88643+19.35356)x483.69684, direction TLT .\whatsit ..\localinterlinepenalty=0 ..\localbrokenpenalty=0 ..\localleftbox=null ..\localrightbox=null .\hbox(0.0+0.0)x0.0, direction TLT .\hbox(10.88643+19.35356)x495.69681, direction TLT ..\hbox(10.88643+4.23357)x56.9055, direction TLT ...\vbox(0.0+15.12)x56.9055, shifted -10.88643, direction TLT [] ..\glue 11.99997 ..\hbox(10.88643+19.35356)x426.79134, direction TLT ...\vbox(0.0+30.23999)x426.79134, shifted -10.88643, direction TLT [] .\penalty 10000 .\glue(\parfillskip) 0.0 plus 1.0fil .etc. floatblocks > volgorde verstoord floatblocks > 3 geplaatst pages > flushing realpage 3, userpage 3 floatblocks > volgorde verstoord floatblocks > 4 geplaatst pages > flushing realpage 4, userpage 4 floatblocks > volgorde verstoord floatblocks > 5 geplaatst pages > flushing realpage 4, userpage 4 floatblocks > volgorde verstoord floatblocks > 6 geplaatst pages > flushing realpage 5, userpage 5 floatblocks > volgorde verstoord floatblocks > 7 geplaatst pages > flushing realpage 6, userpage 6 =================================================== SHORTENED =================================================== floatblocks > volgorde verstoord floatblocks > 104 geplaatst pages > flushing realpage 103, userpage 103 floatblocks > volgorde verstoord floatblocks > 105 geplaatst pages > flushing realpage 104, userpage 104 floatblocks > volgorde verstoord floatblocks > 106 geplaatst pages > flushing realpage 105, userpage 105 floatblocks > volgorde verstoord floatblocks > 107 geplaatst ! Interruption. system > tex > error on line 1 in file R79_OVA.tex: Interruption ... 1 >> % interface=nl 2 \startonderdeel R79_OVA \omgeving homolo 3 \starttekst 4 \def\vehiculo{OVA} \def\directivanr{R79} \def\gendatum{8--2--2013} 5 \stelachtergrondenin[status=stop] 6 \def\textdir{Textos/OVA/} 7 \def\figdir{Fotos/OVA/} 8 %definieren van multilevel genummerde lijsten 9 \doornummeren[linu][plaats=links,voor=,na=,tekst=,afsluiter=.] 10 \steldoornummerenin[linu][breedte=2em] 11 \steldoornummerenin[sublinu][breedte=3em,marge=2em] \page_boxes_shipout ...poutbox \shipoutscratchbox \page_shipouts_handle {\bo... \page_otr_construct_and_shipout ...cted_page #1#2} \page_otr_flush_pending_co... \page_sides_output_routine_nop ...de_float_output \global \d_page_sides_vsiz... \page_sides_output_routine ..._output_routine_nop \fi \page_otr_triggered_output_routine ...and_routine \fi <output> ...ut \page_otr_triggered_output_routine \relax \the \everyafterout... ... l.119 \stoponderdeel ? ! Emergency stop. system > tex > error on line 1 in file R79_OVA.tex: Emergency stop ... 1 >> % interface=nl 2 \startonderdeel R79_OVA \omgeving homolo 3 \starttekst 4 \def\vehiculo{OVA} \def\directivanr{R79} \def\gendatum{8--2--2013} 5 \stelachtergrondenin[status=stop] 6 \def\textdir{Textos/OVA/} 7 \def\figdir{Fotos/OVA/} 8 %definieren van multilevel genummerde lijsten 9 \doornummeren[linu][plaats=links,voor=,na=,tekst=,afsluiter=.] 10 \steldoornummerenin[linu][breedte=2em] 11 \steldoornummerenin[sublinu][breedte=3em,marge=2em] \page_boxes_shipout ...poutbox \shipoutscratchbox \page_shipouts_handle {\bo... \page_otr_construct_and_shipout ...cted_page #1#2} \page_otr_flush_pending_co... \page_sides_output_routine_nop ...de_float_output \global \d_page_sides_vsiz... \page_sides_output_routine ..._output_routine_nop \fi \page_otr_triggered_output_routine ...and_routine \fi <output> ...ut \page_otr_triggered_output_routine \relax \the \everyafterout... ... l.119 \stoponderdeel End of file on the terminal! ! ==> Fatal error occurred, no output PDF file produced!

2 1

fontloader.open() fails on Heiti from acroread fonts
by Philipp Gesang 09 Feb '13

09 Feb '13

Hi all, I’m not sure this is a Luatex or Context bug so please feel free to forward this to the appropriate ML if necessary. With the latest standalone (Luatex beta-0.74.0-2012122510, Context 2013.02.05 22:32) the font db builder fails at Adobe Heiti as distributed with acroread: [14:33:17=>phg@phlegethon=> ~/tmp/ctx/fontdb] mtxrun --script fonts --reload <... /> fonts | names | adding path from OSFONTDIR: /home/phg/.fonts fonts | names | globbing path /usr/share/fonts/**.otftexlua: ../../../source/texk/kpathsea/cnf.c:255: kpathsea_cnf_get: Assertion `kpse->program_name' failed. Aborted (core dumped) (Full log attached.) All fonts, even Adobe stuff, up until Heiti are processed without complaint. I traced the issue to a call to fontloader.open() in font-syn.lua, line 221. To reproduce it, run this code through texlua: #!/usr/bin/env texlua ff = fontloader.open[[/usr/share/fonts/adobe/AdobeHebrew_Regular.otf]] --> works print(ff) --> userdata ff = fontloader.open[[/usr/share/fonts/adobe/AdobeHeitiStd_Regular.otf]] --> fails print(ff) The problem disappears if I initialize kpathsea first: kpse.set_program_name"texlua" ... The problem does not occur with TeX Live 2012/Luatex 0.70/Context 2012.05.30 11:26. Can anyone else reproduce this? Thanks. Philipp

2 1

Chapter headings macro
by Devendra Ghate 09 Feb '13

09 Feb '13

Hello everyone, I have defined a macro for the chapter layouts -- nothing fancy, but still it is giving me trouble. Essentially, I call this macro using *command=* in *\setuphead*. My philosophy was to add all the details in the macro, so that I don't have to call anyother keyvalue pairs in *\setuphead*. However, the macro gives two different results when called for typesetting a chapter heading by ConTeXt internals and explicitly by me in the document (see attached file). I don't know why the chapter number font style is not obeyed. If I add *numberstyle=dfont* in *\setuphead*, then the font size is increased but the frame size has spurious space at top and bottom. When I call the macro myself, there is a single whitespace before the chapter heading (as can be seen in the attached file). I have gone through the wiki as much as possible and I think that I could have easily copied *much better* heading styles from it. But I do not want to use code that I don't fully understand. Any suggestions/help will be most appreciated. Regards, Devendra *MWE* \definefont [dfont] [Serif at 60pt] \definecolor[lightgrey][h=d8dcd6] \define[2]\dmaketitle{% \starttable[|r|r|] \NC \framed [frame=on, rulethickness=3pt, framecolor=lightgrey, foreground=color, foregroundcolor=lightgrey, corner=00, align=right] {\hspace[big]{\dfont#1}} \NC \framed [width=.1\textwidth, strut=no, frame=on, align={flushleft,nothyphenated,verytolerant}] {{\kap\kerncharacters[.5]\tfc#2}} \NR \stoptable } \setuphead [chapter] [command=\dmaketitle] %numberstyle=\dfont \starttext \chapter{Introduction to thesis} \dmaketitle{1}{Introduction to thesis} \stoptext

2 3

margin notes in MKIV (doublesided pages)
by Alan Bowen 09 Feb '13

09 Feb '13

I need margin notes in a doublesided page environment in MKIV. The following: \setuppagenumbering[alternative=doublesided] \setupinmargin[location=both] \starttext \inmargin{n1}\input knuth\inmargin{note 1} \page \inmargin{n2}\input knuth\inmargin{note 2} \page \inmargin{n3}\input knuth\inmargin{note 4} \stoptext works in MKII. In MKIV, however, all the margin notes are on the left. So how can I get this right in MKIV? Alan

2 2

Text structured by curly braces
by Markus Finke 09 Feb '13

09 Feb '13

Hi, I’m looking for something like the example attatched below, braces open left/right, collecting in hiearchies the entries with the capability of vertical lettering. Is there a mechanism in ConTeXt or third party module?

2 1

Re: [NTG-context] Adobe Garamond with Simplefont
by "H. Özoguz" 09 Feb '13

09 Feb '13

Ok, not everything works fine, now everything is bold. So ConTeXt cant recognize the different versions (normal, bold, italic) from adobe garamond pro correctly. But I use them without simplefonts, then it works. Why it is so hard for hard to recognize them correctly, I saw that for other fonts, too. Whereelse other programs do not have these problems. Huseyin

2 1

Re: [NTG-context] Adobe Garamond with Simplefont
by "H. Özoguz" 08 Feb '13

08 Feb '13

Thanks Aditja, now I have the output: adobegaramondpro agaramondprobold -Bold.otf adobegaramondprobold agaramondprobold -Bold.otf adobegaramondproitalic agaramondprobolditalic -BoldItalic.otf adobegaramondpronormal agaramondproitalic -Italic.otf adobegaramondproregular agaramondprobold -Bold.otf and everything works fine! Thank you very much! Huseyin > What is the output of > > mtxrun --expand-var OSFONTDIR > > If it includes the windows font directory, then run > > mtxrun --script font --reload > > and then run > > mtxrun --script font --list --all adobegaramond > > again. > > Aditya

1 0

Indenting nested itemize
by Troy Henderson 08 Feb '13

08 Feb '13

The following does not seem to "indent" the second level itemization. The first level is indented correctly by 2em, but the second level is not indenting by 4em. Troy Henderson \setupindenting[no] \setupitemgroup[itemize][1][][margin=2em] \setupitemgroup[itemize][2][][margin=4em] \starttext Here is some text \startitemize \item Here is an item \item Here is another item \startitemize \item Here is a sub-item \item Here is another sub-item \stopitemize \stopitemize \stoptext

1 0

Trademark symbols
by Devendra Ghate 08 Feb '13

08 Feb '13

Hello, In latex \textregistered gives the Regitered Trademark symbol. How do I get Trademark (TM) and Registered Trademark (encircled R) in ConTeXt? I will be using it with \high to get something like Simulink^® <http://www.mathworks.in/products/simulink/> Regards, Devendra

3 3

Re: [NTG-context] Adobe Garamond with Simplefont
by "H. Özoguz" 07 Feb '13

07 Feb '13

With mtxrun --script font --list --all adobegaramond* the List is empty! No line is prompt. But the name is really "Adobe Garamond Pro" in the "Fonts"-Order in Windows, I checked it again. Huseyin

2 1

Re: [NTG-context] Adobe Garamond with Simplefont
by "H. Özoguz" 07 Feb '13

07 Feb '13

The list is: ebgaramond ebgaramond08regular mond08-Regular.otf ebgaramond08regular ebgaramond08regular mond08-Regular.otf ebgaramond08regularsmallcaps ebgaramond08sc mond08-SC.otf ebgaramond08sc ebgaramond08sc mond08-SC.otf ebgaramond12allsc ebgaramond12allsc mond12-AllSC.otf ebgaramond12allscnormal ebgaramond12allsc mond12-AllSC.otf ebgaramond12italic ebgaramond12italic mond12-Italic.otf ebgaramond12regular ebgaramond12regular mond12-Regular.otf ebgaramond12regularallsmallcaps ebgaramond12allsc mond12-AllSC.otf ebgaramond12regularsmallcaps ebgaramond12sc mond12-SC.otf ebgaramond12sc ebgaramond12sc mond12-SC.otf ebgaramondinitials ebgaramondinitials mond-Initials.otf ebgaramondinitialsf1 ebgaramondinitialsf mond-InitialsF1.otf ebgaramondinitialsf2 ebgaramondinitialsf mond-InitialsF2.otf ebgaramondinitialsfill1 ebgaramondinitialsf mond-InitialsF1.otf ebgaramondinitialsfill1normal ebgaramondinitialsf mond-InitialsF1.otf ebgaramondinitialsfill1regular ebgaramondinitialsf mond-InitialsF1.otf ebgaramondinitialsfill2 ebgaramondinitialsf mond-InitialsF2.otf ebgaramondinitialsfill2normal ebgaramondinitialsf mond-InitialsF2.otf ebgaramondinitialsfill2regular ebgaramondinitialsf mond-InitialsF2.otf ebgaramondinitialsnormal ebgaramondinitials mond-Initials.otf ebgaramondinitialsregular ebgaramondinitials mond-Initials.otf ebgaramonditalic ebgaramond12italic mond12-Italic.otf ebgaramondnormal ebgaramond08regular mond08-Regular.otf ebgaramondregular ebgaramond08regular mond08-Regular.otf ebgaramondsc ebgaramond08sc mond08-SC.otf garamond garamondantiqua ttf But ebgaramond08 or 12 is not Adobe Garamond Pro. So I tried just "Garamond", and it worked! But why? In the list of fonts in Windows the name is "Adobe Garamond Pro", the same in all programs I mentioned. I would like to understand the fond handeling of ConTeXt. Thanks! Huseyin

2 1

Re: [NTG-context] Adobe Garamond with Simplefont
by "H. Özoguz" 07 Feb '13

07 Feb '13

Hi there, did I formulate it unclear, can I describe my problem in a better way? I would be thankful for hints, because I would like it very much to use Adobe Garamond with ConTeXt, like it is very easy to use it in WinWord, or Corel Draw, or many other programs I use. Obviously a minimal example could not clarify this, so what should I do? Does any other ConTexT-User uses this Font? Thanks you. Huseyin

2 1

\starttable ... \stoptable padding
by Troy Henderson 07 Feb '13

07 Feb '13

How do I adjust the margin/padding of \starttable ... \stoptable? In particular, can I make cells immediately next to one another without any padding? Troy Henderson

1 0