- ntg-context - Mailing Lists

Help understanding framed!
by Keith J. Schultz 20 May '13

20 May '13

Hi Everybody, I am trying to develop a module for writing Nassi-Schneidermann-Diagrams. I thought I would use framed and metafun. But, I have run into, for me at least, strange behaviour. I have given MWE and attach the result and a second file which is required. What I do not understand is why the first line after \MyBoxit is "indented" (see source and result below). The second is why when I nest \MyBoxit do I get extra vertical space? Yes, I have found a work around, as I was preparing this mail. Notice, the use of location! What I would want is to leave "location=top" in the setup. Thanx for any help. regards Keith. MWE: \useMPlibrary [txt] \input {Nassi.tex} \defineframed[MyBoxit][framed] \setupframed[MyBoxit] [%background=Statement,% frame=none,% width=10cm,% align=right,% location=top,% framecolor=yellow,% rulethickness=2pt,% %backgroundcolor=white,% strut=no,% heigth=fit,% offset=0pt, frameoffset=0pt, depth=0pt, top=, backgroundoffset=0pt% ] \defineoverlay[MyBoxit][MyBoxit] \starttext Here is the First Problem\par \MyBoxit[width=10cm] { \Statement{First Statement} \Statement{Second Statement} } \crlf With a \% after the opening brace no problem! \par \MyBoxit[width=10cm] {% \Statement{First Statement} \Statement{Second Statement} } \crlf Second problem:\par How do I avoid added space!\par \MyBoxit[width=10cm] {% \IfStatement{$\frac{(x < y)}{z} \gt gh$ OR $x \neq z$ AND \| \\ $z ≥ 2$ AND $z 2$} \MyBoxit[width=10cm]{% \MyBoxit[width=5cm]{% \Statement{First Left} \Statement{Second Left} }% \MyBoxit[width=5cm]{% \Statement{On the right want to be moved up} } } \Statement{Third} } \crlf Should look like this\par \MyBoxit[width=10cm] {% \IfStatement{$\frac{(x < y)}{z} \gt gh$ OR $x \neq z$ AND \| \\ $z ≥ 2$ AND $z 2$} \MyBoxit[width=10cm, location=]{% \MyBoxit[width=5cm, location=top]{% \Statement{First Left} \Statement{Second Left} }% \MyBoxit[width=5cm, location=top]{% \Statement{On the right want to be moved up} } } \Statement{Third} } \stoptext

2 2

line endings in beta
by Philipp Gesang 20 May '13

20 May '13

Hi, did the beta just switch to DOS lineendings? http://repo.or.cz/w/context.git/commitdiff/13ec4b540e0d46c97fd7b089e0b7413d… Acccording to diffstat: 525 files changed, 155385 insertions(+), 152177 deletions(-) If yes, will it stay that way? Best Philipp

2 2

font option "slant" does not work occasionally
by Dohyun Kim 20 May '13

20 May '13

Hi, With the following example, I cannot get slanted shape of unbatang. \setscript[hangul] \setupbodyfont[unfonts] \starttext 가나다 {\it 가나다} 가나다 \stoptext Regards, -- Dohyun Kim Seoul, Republic of Korea

3 3

footnote rollover message in PDFs (with interaction)
by Alan Bowen 19 May '13

19 May '13

The PDFs that I produce are now being read on a number different platforms, some with very small screens. So, in the case of footnotes at least, I was wondering if there was a way to produce PDFs such that when the cursor passes over the footnote call, the popup message includes the entire footnote and not just “Go to page xx”. Alan

2 6

font trickery
by Hans Hagen 18 May '13

18 May '13

Hi, I'm on-and-off working on the more technical font manual and in the process also check some old code i've laying around (deciding on what to include and not). I'm also revising the tracer styles. Which makes me wonder: are there specific additional features that one would like to see in context (mkiv only of course) with respect to font support? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

4 6

\textwidth vs local
by Idris Samawi Hamid ادريس سماوي حامد 18 May '13

18 May '13

Dear gang, Is there a \dimen variable for the local key for the width of a text column? Take a look at the attached pdf: Clearly local is different from \textwidth and \makeupwidth. ============= \starttext \framed[width=\textwidth,frame=on]{\type{\textwidth}} \framed[width=\makeupwidth,frame=on]{\type{\makeupwidth}} \framed[width=local,frame=on]{\type{local}} \startitemize \item \framed[width=\textwidth,frame=on]{\type{\textwidth}} \framed[width=\makeupwidth,frame=on]{\type{\makeupwidth}} \item \framed[width=local,frame=on]{\type{local}} \stopitemize \stoptext ============= I'm working on a macro that depends on the local width and I need to be able to do work with fractions of the local width, e.g. \framed[width=0.9\localwidth]{local width} Thanks in advance for any advice and Best wishes Idris -- Professor Idris Samawi Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 3

BROKEN LINK TRANSLATIONS
by MANUEL GONZALEZ SUAREZ 17 May '13

17 May '13

4 4

Problems with SciTE 3.31 and context package
by Bill Meahan 17 May '13

17 May '13

Having a bit of a problem. I installed SciTE, scintillua and Hans' customizations yesterday and things are not working. SciTE crashes as soon as my context files are loaded. SciTE is version 3.31 (latest) scintillua is version 3.3.0-1 (latest precompiled which has 64-bit .so file included) context add-ons are from a recent beta and have file dates as late as 28-April-2013 system is Linux LadyGeraldine 3.2.0-43-generic #68-Ubuntu SMP Wed May 15 03:33:33 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux wwm@LadyGeraldine$ SciTE Lua Error: /usr/share/scite/lexers/scite-context-lexer.lua:508: attempt to compare number with nil. Lua Error: Table of folds expected from 'lexer.fold'. Lua Error: /usr/share/scite/lexers/scite-context-lexer.lua:508: attempt to compare number with nil. *** glibc detected *** SciTE: realloc(): invalid pointer: 0x09d9e5c0 *** Backtrace not included I'll try compiling from source if you think it will help. Ideas appreciated. Thanks -- Bill Meahan Westland, Michigan USA

2 3

New font (rival to Taco's cowfont?)
by Alan BRASLAU 17 May '13

17 May '13

http://nekofont.upat.jp/ Alan

3 2

[***SPAM***] Wrong °C symbol with \unit and dejavu font
by Romain Diss 17 May '13

17 May '13

Hi all, With this minimal example: %%% start \setupbodyfont[dejavu] \starttext Temperature : \unit{100 celsius}. \stoptext %%% end I get the °F symbol instead of °C. With lmodern or pagella (I did not try other fonts) the right symbol (°C) is printed. Any idea of what goes wrong? -- Romain Diss <romain.diss(a)yahoo.fr>

6 10

[***SPAM***] Positioning of frames in a frame
by "H. Özoguz" 16 May '13

16 May '13

Hello together, designing a card-game I use an overlay as background an a frame, with three parts, realized as three frames in the outer frame (which is simply the border of the card). See my try: \starttext \framed[width=4.55cm, height=7.4cm, frame=on, background=eslami]{% \framed[width=4.55cm, height=2cm]{Begriff} \framed[width=4.55cm, height=3cm]{Verbotener Begriff 1} \framed[width=4.55cm, height=2.4cm]{Erklärung} } \stoptext Two questions: 1. How can I control the distance between the inner frames? It should be: 0cm, so no distance. 2. The left border of the inner frames do not match with the left border of the outer frame, but they should. Howto? Thanks Huseyin

2 1

bonum
by Hans Hagen 16 May '13

16 May '13

Hi, There is now support for math in bonum: http://www.pragma-ade.com/specials/fonts/math-repertoire-bonum.pdf Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Off-topic: Convert PDF to (Con/La)TeX
by Xan 15 May '13

15 May '13

Hi, I just want to know if there is any tool to convert a pdf (generated by latex or context) to latex source or context source file. Does anyone have got an experience on that? I'm thinking about two alternatives: * libraries for reading like podofo and custom script for passing pdf context (text) to context commands * pass pdf to jpg, and apply http://detexify.kirelabs.org/classify.html for passing to tex symbols. For me it's vital to pass mathematical symbols like (\int) to tex symbol and not like utf-8 symbols. Thanks a lot, Xan. Note: pdf could be substitute for ps if you want ;-) PS: Please CCme

2 3

Support for Thai in ConTeXt
by luigi scarso 15 May '13

15 May '13

On Tue, May 14, 2013 at 5:59 PM, Theppitak Karoonboonyanan < theppitak(a)gmail.com> wrote: > On Tue, May 14, 2013 at 9:58 PM, luigi scarso <luigi.scarso(a)gmail.com> > wrote: > > > > On Tue, May 14, 2013 at 4:16 PM, Mojca Miklavec > > <mojca.miklavec.lists(a)gmail.com> wrote: > >> > >> I could also ask differently: suppose that a motivated Thai programmer > >> would be willing to work on solving the problem properly. What would > >> be the suggested solution? > > > > You can post also in the context ml, maybe there is some Thai user there > . > > I am a Thai developer who works on Thai word segmentation tools and > thailatex package. So, you can suggest to me. (Please Cc: me, I'm not > in the mailing list.) > > I'm totally new to LuaTeX and Lua programming language. But I can learn > necessary stuffs to get it done. > > With a quick search, I saw "linebreak_filter" callback in LuaTeX reference. > Is that relevant to the problem? Or using external filter is already > acceptable? > > Regards, > -- > Theppitak Karoonboonyanan > http://linux.thai.net/~thep/ > I Hope that someone can help here -- luigi

3 4

MPLibrabray "txt" broken!?
by Keith J. Schultz 15 May '13

15 May '13

Hi All, Hans, I want to use build_parshape and shapetext with the latest standalone ConTeXt ver: 2013.05.12 22:16 MKIV beta fmt: 2013.5.13 int: english/english with the Example below I get a small box with the top part of a T in it. Interresting enough the example works with the TexLive 2012 version! Running with latest standalone the following files are created: -rw-r--r-- 1 staff 14410 14 Mai 13:59 test2.log -rw-r--r-- 1 staff 5132 14 Mai 13:59 test2.pdf -rw-r--r-- 1 staff 634 14 Mai 13:59 test2.synctex.gz -rw-r--r--@ 1 staff 899 14 Mai 13:37 test2.tex -rw-r--r-- 1 staff 8413 14 Mai 13:59 test2.tuc Using MkIV from TeXLive 2012 the following files are created: -rw-r--r-- 1 staff 561 14 Mai 14:09 test2-mpgraph.mpd -rw-r--r-- 1 staff 19404 14 Mai 14:09 test2.log -rw-r--r-- 1 staff 9638 14 Mai 14:09 test2.pdf -rw-r--r-- 1 staff 3237 14 Mai 14:09 test2.synctex.gz -rw-r--r--@ 1 staff 899 14 Mai 13:37 test2.tex -rw-r--r-- 1 staff 6079 14 Mai 14:09 test2.tuc And all is well! Goofy as I am I tried the standalone again, this works only partially because the text is not aligned properly. How can it be the file test2-mograph.mpd was used from the TexLive 2012 version! So something is astray! I do know that we are using a newer Metapost, but I assume the problem is the library or how the temporary files are generated or used. Any help would be nice. regards Keith. \useMPlibrary[txt] \startuseMPgraphic{shape} % Shape of the paragraph path p ; p := ((0,1)..(-1,0)..(1,0)--cycle) scaled 5cm ; build_parshape ( p, % shape path .5*\baselinedistance, % offset .5*\baselinedistance, % x offset .5*\baselinedistance, % y offset \baselinedistance, % distance between lines \strutheight, % height of a line \strutdepth, % depth of a line \strutheight % height of the first line ) ; % For visualization purposes only draw p ; \stopuseMPgraphic % For visualization purposes only \defineoverlay[shape][\useMPgraphic{shape}] \setupshapetexts% [bodyfont=10pt] \starttext \startshapetext[shape] \input knuth \endgraf \stopshapetext % The \type{background} is set only to visualize the parshape \startTEXpage[background=shape,offset=2mm] {\getshapetext} \stopTEXpage \stoptext

2 5

Makeup layout
by Andrew Bernard 15 May '13

15 May '13

Greetings list, A newbie question: how does one adjust the vertical position of text in a makeup block for a title page? It seems to go on the centre no matter what. The voffset and hoffset parameters appear to have no effect. I have heard that layers can be used. But there is no section on layers in the current reference manual. Where does one find information on this aspect of ConTeXt? Andrew

3 2

MkIV problem+fix with \framed[location=depth / height / hanging]
by Sietse Brouwer 15 May '13

15 May '13

Hi Hans, I believe that in MkIV some \framed[location=...] keys are not working, namely `depth`, `height`, and `hanging`. In MkIV these all place the bottom of the frame flush with the baseline, like [location=]. In MkII they behave more sensibly, as follows: * depth: place bottom of frame flush with bottom of the line (i.e. \strutdepth below baseline) * height: place top of frame flush with top of line * hanging: place top of frame flush with baseline Test code below, mkii and mkiv output attached. I have produced a fix for the code in pack-rul.mkiv [1], placed at the very bottom of this e-mail. It works; but it is a pure-bred example of cargo cult programming, i.e. lots of 'making it look right' and very little understanding, so you will probably want to check it. [1] http://repo.or.cz/w/context.git/blob/HEAD:/tex/context/base/pack-rul.mkiv All the best, Sietse \setupcolors[state=start] \setupblackrules[depth=\strutdepth,height=\strutheight,width=1mm,color=red] \starttext \ruledhbox {A \framed[width=2cm,align=middle,location=] {location\\equals\\(nothing)}% \blackrule \framed[width=2cm,align=middle,location=depth] {location\\equals\\depth}% \blackrule \framed[width=2cm,align=middle,location=height] {location\\equals\\height}% \blackrule \framed[width=2cm,align=middle,location=hanging]{location\\equals\\hanging} B} \vskip2cm \ruledhbox {A \framed[width=2cm,align=middle,location=low] {location\\equals\\low} \framed[width=2cm,align=middle,location=line] {location\\equals\\line} \framed[width=2cm,align=middle,location=high] {location\\equals\\high} B} \vskip2cm \ruledhbox {A \framed[width=2cm,align=middle,location=bottom] {location\\equals\\bottom} \framed[width=2cm,align=middle,location=lohi] {location\\equals\\lohi} \framed[width=2cm,align=middle,location=middle] {location\\equals\\middle} \framed[width=2cm,align=middle,location=top] {location\\equals\\top} B} \stoptext ------- This is the fixed code -------- \installframedlocator \v!hanging % best with strut=no {} - {\dp\b_framed_normal\scratchdimen + {\scratchdimen\ht\b_framed_normal + \setbox\b_framed_normal\hbox{\lower\scratchdimen\box\b_framed_normal}% + \dp\b_framed_normal\scratchdimen \ht\b_framed_normal\zeropoint \hbox{\box\b_framed_normal}} \installframedlocator \v!depth {} - \ht\b_framed_normal\dimexpr\ht\b_framed_normal-\strutdp\relax + {\setbox\b_framed_normal\hbox{\lower\strutdp\box\b_framed_normal}% + \ht\b_framed_normal\dimexpr\ht\b_framed_normal-\strutdp\relax \dp\b_framed_normal\strutdp \hbox{\box\b_framed_normal}} \installframedlocator \v!height {} - {\dp\b_framed_normal\dimexpr\ht\b_framed_normal-\strutht\relax + {\scratchdimen\dimexpr \ht\b_framed_normal - \strutht \relax + \setbox\b_framed_normal\hbox{\lower\scratchdimen\box\b_framed_normal}% + \dp\b_framed_normal\dimexpr\ht\b_framed_normal-\strutht\relax \ht\b_framed_normal\strutht \hbox{\box\b_framed_normal}}

3 5

Processing URL with TeX macros
by Jaroslav Hajtmar 15 May '13

15 May '13

Hello ConTeXist. I would like get right URL, when I use \useURL command. Is there possibilities put any TeX macro to first and second parameter? It was clear to me why this is about, but I need it for one application (in the cycle I change URL addresses). Thanx Jaroslav Hajtmar Here is my minimal example: \setupinteraction[state=start] \def\myurl{http://mydomain.com/path/} \def\myfile{mypdffile.pdf} \def\urltext{This is link to my file} \useURL[okexample][http://mydomain.com/path][mypdffile.pdf][\urltext] \useURL[problemexample][\myurl][\myfile][\urltext] \starttext \from[okexample] -- OK \from[problemexample] -- link problem \stoptext

2 2

Re: [NTG-context] Distanc to rightframe in TABLE
by "H. Özoguz" 15 May '13

15 May '13

> \define[2]\arde > {\bTR > \bTD[roffset=1ex,…]#1\eTD > \bTD[loffset=1ex,…]#2\eTD > \eTR} > > Wolfgang Thanks Wolfgang! And one more question to this table: Whythe left german text is aligned left, and the arabic text is justified? How to make both flushleft/flushright? If I add "align=flushright", then the "align=r2l" attribute is deactivated. Thanks. Huseyin

2 1

Distanc to rightframe in TABLE
by "H. Özoguz" 15 May '13

15 May '13

Hi, the german-arabic-transliteration-environment becomes, with your kind help, better and better. Next question, see this standard-code: \definefont[amiri][file:UthmanTN1Ver10.ttf*arabic at 10 pt] % or amiri-regular.ttf \define[1]\Arab{\setupalign[r2l]\amiri#1} %\showgrid \startsetups[arde] \setupTABLE[c][1][rightframe=on] \stopsetups \def\startarde {\bTABLE[frame=off,width=.5\textwidth,setups=arde,split=yes]} \def\stoparde {\eTABLE} \define[2]\arde {\bTR \bTD [style={\setupinterlinespace[line=3ex]}] #1\eTD \bTD[align=r2l,style={\amiri\setupinterlinespace[line=5ex]}] #2 \eTD \eTR} \starttext \startarde \arde{\input knuth}{االلّهُمَّ إِنِّي أَسْأَلُكَ أَنْ تَجْعَلَ فِيما تَقْضِي وَتُقَدِّرُ مِنَ الاَمْرِ المَحْتُومِ فِي الاَمْرِ الحَكِيمِ مِنَ القَضاء الَّذِي لايُرَدُّ وَلا يُبَدَّلُ أَنْ تَكْتُبَنِي مِنْ حُجَّاجِ بَيْتِكَ الحَرامِ المَبْرُورِ حَجُّهُمُ المَشْكُورِ سَعْيُهُمُ المَغْفُورُ ذُنُوبُهُمُ المُكَفَّرِ عَنْ سَيِّئاتِهِمْ، وَأَنْ تَجْعَلَ فِيما تَقْضِي وَتُقَدِّرُ أَنْ تُطِيلَ عُمْرِي فِي خَيْرٍ وَعافِيَةٍ وَتُوَسِّعَ فِي رِزْقِي وَتَجْعَلَنِي مِمَّنْ تَنْتَصِرُ بِهِ لِدِينِكَ وَلاتَسْتَبْدِلْ بِي غَيْرِي } \stoparde Now I want a distance between the left german text and the middle vertical line (which is just the rightframe of the first cell), and also a distance between the arabic text and this same rightframe. So the texts should not "glue" to the vertical line. How to do that? Thanks Huseyin

2 1

Grid typesetting: aligning section to top of textarea
by Sietse Brouwer 14 May '13

14 May '13

Dear list, I am making a foray into grid typesetting, and would like to align the top of my (possibly multi-line) section titles with the top of the textarea. I thought I could do that with \setuphead[subject][grid={broad,high}], but this is not working. I have tried nearly every other combination of grid keywords, and then tried them again with the subject wrapped in a framed. The "It's in the details" manual didn't provide help. I found an old e-mail by Honza, but that never got a reply. http://www.pragma-ade.com/general/manuals/details.pdf http://www.mail-archive.com/ntg-context@ntg.nl/msg58456.html I put an MWE below, and I have attached its output. If anybody has any clues for me, (or 'not currently available, you can stop trying'), I would be most grateful. Cheers, Sietse \setuppapersize[A5] %% Activate grid \setuplayout [grid=yes, width=middle, topspace=2\lineheight, height=31\lineheight, header=2\lineheight, footer=0\lineheight,] \setupbodyfont[schola,13pt] \definefont[AntykwaChapter][antykwatorunskaregular at 18pt]% %% If wrapping the subject in a framed is needed, this command does it \def\subjectcommand#1{% \framed[ frame=on, framecolor=blue, width=\textwidth, align=flushleft, offset=none, %% strut=no does not work %% so cancel out lineheight-fontsize diff with -toffset toffset=-4.5pt, %% This *should* mean: %% * take topmost line in framed as reference line %% * align top of reference line with external baseline. %% but grid=yes may disable that. location={top, hanging}, ]{\AntykwaChapter #1}} %% The head-specific grid setup comes here \setuphead[subject] [header=high, % no header; extend textarea into header area page=yes, %% Take the box, assume it is a snug fit of its contents, and align %% its top with the grid line above it? %% Seems to do nothing %% A tweak like '-3pt' ditto grid={fit,high}, textcommand=\subjectcommand, % textstyle=\AntykwaChapter, ] \showframe \showgrid \showstruts %% Example text \starttext \subject{The hoard of the gibbelins} The Gibbelins eat, as is well known, nothing less good than man. \startsubject[ title={How Nyth would have worked his art upon the gnoles}, marking=How Nuth would have worked his art, ] Despite the advertisements of rival firms, it is probable that every tradesman knows that nobody in business at the present time has a position equal to that of Mr. Nuth. \stopsubject \stoptext

2 1

authoring for web and print - suggestions
by Norbert Preining 13 May '13

13 May '13

Dear all, this time I have a question not concerning how to ship ConTeXt in Debian or so, but very different. Does anyone have experience with authoring for web and print. I.e., we want to maintain only one format and generate both web pages and printed documentation from it. Is there intrinsic or through addons support in ConteXt for this? Any suggestion would be greatly welcome Norbert ------------------------------------------------------------------------ PREINING, Norbert http://www.preining.info JAIST, Japan TeX Live & Debian Developer DSA: 0x09C5B094 fp: 14DF 2E6C 0307 BE6D AD76 A9C0 D2BF 4AA3 09C5 B094 ------------------------------------------------------------------------

7 7

Interlinespacing with arabic in natural tables
by "H. Özoguz" 13 May '13

13 May '13

Hi, now the big problems with arabic fonts are solved, and other problems arises, see this code: \definefont[amiri][file:UthmanTN1Ver10.ttf*arabic at 13 pt] % or amiri-regular.ttf \define[1]\Arab{\setupalign[r2l]\amiri#1} \showgrid \startsetups[arde] \setupTABLE[c][1][rightframe=on] \stopsetups \def\startarde {\bTABLE[frame=off,width=.5\textwidth,setups=arde,split=yes]} \def\stoparde {\eTABLE} \define[2]\arde {\bTR \bTD #1\eTD \bTD \setupinterlinespace[line=5ex] \setupalign[left] \amiri \Arab{#2}\eTD \eTR} \starttext \startarde \arde{blub}{االلّهُمَّ إِنِّي أَسْأَلُكَ أَنْ تَجْعَلَ فِيما تَقْضِي وَتُقَدِّرُ مِنَ الاَمْرِ المَحْتُومِ فِي الاَمْرِ الحَكِيمِ مِنَ القَضاء الَّذِي لايُرَدُّ وَلا يُبَدَّلُ أَنْ تَكْتُبَنِي مِنْ حُجَّاجِ بَيْتِكَ الحَرامِ المَبْرُورِ حَجُّهُمُ المَشْكُورِ سَعْيُهُمُ المَغْفُورُ ذُنُوبُهُمُ المُكَفَّرِ عَنْ سَيِّئاتِهِمْ، وَأَنْ تَجْعَلَ فِيما تَقْضِي وَتُقَدِّرُ أَنْ تُطِيلَ عُمْرِي فِي خَيْرٍ وَعافِيَةٍ وَتُوَسِّعَ فِي رِزْقِي وَتَجْعَلَنِي مِمَّنْ تَنْتَصِرُ بِهِ لِدِينِكَ وَلاتَسْتَبْدِلْ بِي غَيْرِي إِلهِي وَقَفَ السَّائِلُونَ بِبابِكَ، وَلاذَ الفُقَراءُ بِجَنابِكَ وَوَقَفَتْ سَفِينَةُ المَساكِينِ عَلى ساحِلِ بَحْرِ جُودِكَ وَكَرَمِكَ يَرْجُونَ الجَوازَ إِلى ساحَةِ رَحْمَتِكَ وَنِعْمَتِكَ. إِلهِي إِنْ كُنْتَ لاتَرْحَمُ فِي هذا الشَّهْرِ الشَّرِيفِ إِلاّ مَنْ أَخْلَصَ لَكَ فِي صِيامِهِ وَقِيامِهِ فَمَنْ لِلْمُذْنِبِ المُقَصِّرِ إِذا غَرِقَ فِي بَحْرِ ذُنُوبِهِ وَآثامِهِ ؟ إِلهِي إِنْ كُنْتَ لاتَرْحَمُ إِلاّ المُطِيعِينَ فَمَنْ لِلْعاصِينَ ؟ وَإِنْ كُنْتَ لاتَقْبَلُ إِلاّ مِنَ العامِلِينَ فَمَنْ لِلْمُقَصِّرِينَ ؟ إِلهِي رَبِحَ الصَّائِمُونَ، وَفازَ القَائِمُونَ، وَنَجا المُخْلِصُونَ، وَنَحْنُ عَبِيدُكَ المُذْنِبُونَ. فَارْحَمْنا بِرَحْمَتِكَ، وَاعْتِقْنا مِنَ النَّارِ بِعَفْوِكَ، وَاغْفِرْ لَنا ذُنُوبَنا بِرَحْمَتِكَ. يا أَرْحَمَ الرَّاحِمِينَ } \stoparde \stoptext This is my default environment for setting with two languages (translations). On the right side, you see the problem with the arabic: The interlinespace. Between the first lines everything is ok, but then the interlinespace becomes smaller and smaller. Why? It is some issue of the table, because if I set the arabic text purely out of the table by \Arab{}, then there is no problem and all interlinespaces are the same. So where comes this from? Huseyin

2 1

Rotating vector graphics.
by john Culleton 13 May '13

13 May '13

In context can I use a pdf graphic but rotate it 90 degrees? It is easy to convert it to bitmap and rotate it in Gimp or with ImageMagick but I would like to retain the vector format. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Re: [NTG-context] Rotating vector graphics.
by "H. Özoguz" 13 May '13

13 May '13

Try this: http://wiki.contextgarden.net/Using_Graphics#Rotating_images Huseyin

1 0