- ntg-context - Mailing Lists

error: Control sequence expected instead of undefined
by Jeong Dal 25 Dec '23

25 Dec '23

Hi, I got an error message as following: Control sequence expected instead of undefined If I comment out the “\externalfigure[][]” line, then there is no error message. I don’t know what is wrong in the sample code. Please check the code. Thank you for reading. Best regards, Dalyoung %%%********************* \starttext \in{figure}[fig:kruskal1] is my point. \startplacefigure[location=,reference=fig:kruskal1,title={}] \externalfigure[cow][width=.5\makeupwidth] \stopplacefigure \stoptext %%%%%

3 3

\setupsynonyms textstyle=cap failing
by Garulfo 24 Dec '23

24 Dec '23

Hi all, the following minimum working example is properly typesetted with textstyle=bold, but it fails with textstyle=cap (ConTeXt version : 2023.09.26 18:19) A number should have been here; I inserted '0'. (If you can't figure out why I needed to see a number, look up 'weird error' in the index to The TeXbook.) mtx-context | fatal error: return code: 1 It works on https://context-on-web.eu (ConTeXt version : 2022.12.22 22:17) \definesynonyms [abbreviation] [abbreviations] [\AbbreviationsFull] \setupsynonyms [abbreviation] [textstyle=bold] \starttext \contextversion \abbreviation{NTG}{Nederlandstalige TeX Gebruikersgroep} Test 1 : \NTG . Test 2 : \AbbreviationsFull{NTG}. \stoptext Any clue ?

3 2

QR Code
by Ursula Hermann 21 Dec '23

21 Dec '23

Dear List I was interested how it works. So I started this example. \starttext \usemodule[m-zint] \barcode[alternative=isbnx, text=9783865419026, width=4cm] \barcode[alternative=qrcode, text={https://wiki.contextgarden.net}, width=3cm] \stoptext Is that the right way? Many thanks Uschi

5 12

underbrace label across two lines
by Dean Hung 20 Dec '23

20 Dec '23

Hi list, Following on from Aditya's solution to my previous question, I have run into a separate issue and would appreciate any assistance. Sometimes text under the underbrace can become quite long, and should be split into two (or more) lines. In the example below, "firstline" should be the top line of the underbrace label, and "secondline" should be on the lower line of the underbrace label, but as it stands, both are printed on the same line. \underbrace[mindepth=0.5cm]{\tf x+y+z}_{\vrule width 0pt height 0.5cm\relax\text{firstline secondline}} I have tried using \\ and \crlf, but to no avail. Any help would be greatly appreciated! Dean

2 2

install-modules script and git URLs
by Pablo Rodriguez 20 Dec '23

20 Dec '23

Hi Hraban and Taco, the install-modules script doesn’t allow .tar.gz as compression format to install modules. .tar.gz seems to be the compression format offered for modules that are uploaded using a git URL. Hraban explained in August that thee server could be configured to get .zip compression for modules in git checkout. Sorry, I know that you are both very busy, but could it be this issue fixed? Using git to upload module versions is way more easy than uploading .zip files. Many thanks for your help to both, Pablo

3 4

Seeking advice for module that draws globes
by Gavin 19 Dec '23

19 Dec '23

Hello ConTeXters, I wrote a little ConTeXt module for drawing globes. I would love some advice on how to improve it and share it. The code is quite short (about 250 lines). Most of the work is done by Lua, which reads the data files and calculates paths. These paths are passed to MetaFun, which draws the globe. Below is an example document with the output. (I attached a small .png of the output for the mailing list. The output PDF has excessive detail.) The module (code and data) is on GitHub at https://github.com/GavinPolhemus/luageo. \usemodule [luageo] \startMPpage GlobeDiameter = 10cm ; fill fullcircle scaled GlobeDiameter withcolor .9white ; % Fill a circle with the water color. drawglobe(23, 0) scaled GlobeDiameter withcolor .75white ;% Draw the land, centered on the given latitude and longitude. draw fullcircle scaled GlobeDiameter withcolor black ; % Add a border, if you want. \stopMPpage I am a novice at both Lua and MetaPost. I’m also new to Git and have never shared anything of substance with the ConTeXt community. (This barely counts as substantive, but I figure it’s best to start small.) I’m sure many of you could find opportunities for improvement with even a quick glance at the code. I welcome anything, from advice on performance to suggestions about the license. My most pressing questions are these: 1. How do I avoid redrawing diagrams with every typeset? The globe above takes about 0.7s, which is not bad, but it adds up in a book with many diagrams. 2. How do I organize this according to TDS for sharing? I know what TDS is and why it’s important, but that’s about it! 3. Should I be creating a namespace for this module, or launching a separate MetaFun instance? I have a general sense of what “namespace” and “instance” mean is this context, but I don’t know the consequences or the how-to. I’d like to share this module, even though the potential demand is tiny, at best. I’m going through the Module Writing Guidelines (https://wiki.contextgarden.net/Modules#Module_writing_guidelines) but there is a lot that I don’t understand in those instructions. Questions 2 and 3 above relate to the instructions that are most mysterious to me. I think I can figure most of the others out. I have been using ConTeXt for several years to write a high school physics textbook (along with the problem sets, tests, equations sheets, etc.). I wrote this module because I needed globes in some diagrams. I found an old MetaPost tool, mp-geo, that seemed to have the right ingredients, but I couldn’t get it to work, so I wrote my own tool using the data files from mp-geo. Hans and others on the list gave me valuable advice for these globes a couple years ago (and gave other valuable advice on all sorts of things before and since). Many diagrams in my physics book use TikZ and pgfplots. I'd like to convert everything to MetaFun. I think the best way will be writing a few more modules for things like graphs (including polar and 3D plots), simple circuits, simple Feynman diagrams, etc. I’m hoping that these would be useful to the ConTeXt community. The luageo module has the basic design I’d like to use for the others: Lua for data handling and calculations, producing paths that are drawn by MetaFun. With some mentoring from the generous ConTeXt community, I’m hoping we can provide MetaFun alternatives to some of the TikZ libraries. I have an alpha version of luagraph by Alan Braslau, which was helpful in designing luageo. Working on luagraph is my next project. Gavin

3 10

increase vertical between underbrace and equation
by Dean Hung 19 Dec '23

19 Dec '23

Hi ConText friends, I am trying to increase the vertical distance between the underbrace and the part of the equation above the underbrace. \startformula \underbrace{x+y+z}_{\blank[1cm]\mathrm{my text here}} \stopformula I've tried using \blank and \vspace, but to no avail. For example: \underbrace{x+y+z}_{\blank[1cm]\mathrm{my text here}} ...does not work. The documentation on underbrace (and overbrace, underbracket, etc...) in the ContextGarden wiki seems to be very limited, and I was not able to find any user-supplied arguments for increasing this vertical distance. There are various solutions available for LaTex, and they require external packages (e.g., BigStrut, vphantom) that redefine the strut height. I hope I'm missing something simple... Any help would be greatly appreciated! DY Hung

4 6

usage of conversion in \date
by Peter Münster 18 Dec '23

18 Dec '23

Hi, When printing a date in French, I would like to convert the "1" to "1\ier", but it does not work as I expect: --8<---------------cut here---------------start------------->8--- \startluacode -- from https://wiki.contextgarden.net/Command/defineconversion: interfaces.implement { name = "FRdate", public = true, arguments = "string", actions = function(s) local n = tonumber(s) if n == 1 then context"1\\ier" else context(s) end end } \stopluacode \def\ier{\highordinalstr{er}} \mainlanguage[fr] \defineconversion[frd][\FRdate] \setuplanguage[fr][date={day:frd,\ ,month,\ ,year}] \starttext Conversion: \convertnumber{frd}{1}, \convertnumber{frd}{2} (OK)\\ Dates: \date[d=1], \date[d=2] (not OK) \stoptext --8<---------------cut here---------------end--------------->8--- How could I get "1\ier\ novembre 2023" please? TIA for any help, -- Peter

2 3

Problem with the paragraph
by Ursula Hermann 18 Dec '23

18 Dec '23

Dear list, I have this example. I need the whole paragraph in color. But there is something wrong. \definepapersize[MyBook][width=19cm,height=24cm] \setuppapersize[MyBook][MyBook] % Prints on paper the size of MyBook %\setuppapersize[MyBook][A4] %Would print MyBook-size pages on A4 paper \setupbodyfont[Times New Roman, 12.2pt] \definemargindata [MyInMargin][inright] \definemarginframed[MyInMargin][topframe=on,bottomframe=on,rulethickness=1pt,width=1.90cm] \defineenumeration [theorem] [ text=Theorem, title=yes, width=fit, distance=0.2em, alternative=serried, ] \definetextbackground[paragraph][ location=paragraph, background=color, backgroundcolor=lightgray, leftoffset=.5\bodyfontsize, rightoffset=.5\bodyfontsize, topoffset=.5\bodyfontsize, bottomoffset=.5\bodyfontsize, before={\switchtobodyfont[global]}, after={}, frame=off,] \margintext{\blackrule[color=black, height=0.10ex, width=1cm]\\}\blackrule[color=black, height=0.10ex, width=13.50cm] \starttext \margintext {1.1.1} \starttext \bf{Beispiel 3.2.17 (Vertauschung von All- und Existenzquantor)}. \stoptext \starttext {\it \par Sei M die Menge aller Männer und F die Menge aller Frauen. Die Aus-\par sage h(m, f) sei ”m ist verliebt in f“. Unter diesen Voraussetzungen machen Sie sich die Bedeutung der beiden Aussagen klar. \stoptext \par \starttext 1. \m\forall m ∈ M : ∃f ∈ F : h(m, f).\par 2. ∃f ∈ F : ∀m ∈ M : h(m, f).\par \stoptext \blank \starttext \startparagraph \blank \tf Mitunter ist es aus der Formulierung nur schwer zu erkennen, dass ein \m ∃\forall∀ oder ein \m \forall∀\m∃ versteckt ist. Dann ist es besonders wichtig, die Formulierung sehr lange zu prüfen und eventuell auch formalisiert noch einmal aufzuschreiben.”\blank Der Wert von y = f(x) ist unabhängig von der Wahl\par von x“ ist gleichbedeutend mit ∃y : ∀x : f(x) = y \par (Beutelspacher [10, S.54]). \blank \stopparagraph \stoptext Many thanks Uschi

4 5

error with definestartstop and startmode
by Peter Münster 18 Dec '23

18 Dec '23

Hi, I get an "runaway error" with the following example: --8<---------------cut here---------------start------------->8--- \definestartstop[H][color=blue, before={\startmode[h]}, after={\stopmode}] \starttext test \startH TEST \stopH \stoptext --8<---------------cut here---------------end--------------->8--- How could I create such start-stop pair please? TIA for any hints, -- Peter

4 4

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 18 Dec '23

18 Dec '23

rsync: [Receiver] failed to connect to rsync.pragma-ade.nl (213.125.29.165): No route to host (113) rsync error: error in socket IO (code 10) at clientserver.c(139) [Receiver=3.2.7]

1 0

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 18 Dec '23

18 Dec '23

rsync: [Receiver] failed to connect to rsync.pragma-ade.nl (213.125.29.165): No route to host (113) rsync error: error in socket IO (code 10) at clientserver.c(139) [Receiver=3.2.7]

1 0

APA 7 and https
by Oliver Marugg 17 Dec '23

17 Dec '23

Hi I am quite new with ConTeXt, coming from LaTeX. I really like it and it is sooo fast;-). I am currently preparing the framework for the typeset of a research paper with a bibtex bibliography and current apa7 citations. How to achieve a change the url in bibliographies DOI from doi: to https://doi.org/ in the list of publications and change the url path in PDF from http: to https:// as recommended in APA7? Any hints? Many thanks, Oliver

3 4

How to input first n lines from file?
by Joel 16 Dec '23

16 Dec '23

With the command `\input file`, I can input the entire contents of `file.tex`. Is there a way to limit it to the first n lines, for instance, something like `\input[10]` file would only input the first 10 lines from `file.tex` and ignore the rest of the lines. --Joel

2 1

LMTX: Command handling, Interface between TeX and Lua
by Gerion Entrup 14 Dec '23

14 Dec '23

Hi, I'd like to understand more of the inner workings of LMTX. When I understand it right, most of the code is now processed in Lua but I was not able to find it. For example, I tried to find out how setupitemgroup is handled (just as an example of a more complex command). The wiki has a (kind of) autogenerated description: https://wiki.contextgarden.net/Command/setupitemgroup I found the data for this (at least this is my guess) here: tex/texmf-context/tex/context/interface/mkiv/i-itemgroup.xml Are these xml files created by hand or somehow generated? Now, when I use `\setupitemgroup[itemize:1][symbol=3,itemalign=middle]`: How are the arguments handled and is this a generic process or specific to each command? Is there a simple way to define a new command/environment and handle the keyword arguments in Lua? For example defining a frontend command like this: \startsomething[firstword={Some},secondword={Text}] Body \stopsomething which I can handle in some lua code like this: function something(firstword, secondword, body) tex.print(firstword) tex.print(secondword) tex.print(body) end Are there any resources beside the context code itself where I can learn that? Gerion

2 2

About framedtext
by Fabrice Couvreur 14 Dec '23

14 Dec '23

Hi, Is this a bug or not ? The key to coloring the background of the text seems to no longer work. Thanks Fabrice \definecolor[MyColorC][s=0.8784] \definecolor[MyColorD][m=0.27,y=1] \definecolor[ColorA][0.8(white)] \definecolor[MyColorB][c=0.00, m=0.62, y=1.00, k=0.00] \definecolor[MyColorA][.75(MyColorB,white)] \defineframed [FrameTitle] [frame=off, foregroundstyle=\bfx\ss, foregroundcolor=white, background=color, backgroundcolor=MyColorD, location=depth] \defineframedtext [FramedText] [offset=0.25em, style=\ss, toffset=\zeropoint, background=color, backgroundcolor=MyColorA, foregroundstyle={\switchtobodyfont[9pt]}, align={right, broad}, frame=off, corner=00, radius=0.5em, width=10cm] \definedescription [Info] [before=, after=, text=Info, title=no, width=fit, distance=0.5em, headcommand=\FrameTitle, alternative=serried] \starttext \startFramedText[width=5cm] \startInfo \input{ward} \stopInfo \stopFramedText \stoptext

4 6

Score sums and references
by Jairo A. del Rio 14 Dec '23

14 Dec '23

Hi, dear list. Is there a proper "ConTeXt way" to do the following? \integerdef\lmao=0 \starttext Sum: \in[trick] % 10 from the result below +1\advance\lmao\plusone +2\advance\lmao\plustwo +3\advance\lmao\plusthree +4\advance\lmao\plusfour \normalexpanded{\reference[trick]{\the\lmao}} % 10 printed above \stoptext I want the result of a sum (either via Lua or TeX) to be printed before summands in text, but without the mess of reference options such as interaction, etc. Thank you in advance and sorry for any inconvenience. Regards, Jairo

2 2

regular online meet-up
by Henning Hraban Ramm 13 Dec '23

13 Dec '23

Hi folks, I completely forgot to invite you to the last online meet-up of the year, this Wednesday, December 13th, 19:00 CET (UTC+1) at https://lecture.senfcall.de/hen-rbr-rku-oke (same, but shorter: https://u.mtxrun.eu/ctxmtg) ConTeXt users of all levels are welcome! Looking forward to seeing you, Hraban (Same blurb as every time:) [Howto] * No special software installation required; most modern browsers should work (WebRTC required). * Open the above URL, accept the privacy statement, * enter your name, * click "join" (or "start" if you’re the first), * click "with microphone", allow your browser to access it, check the audio. * Your microphone is muted if you join. Activate microphone and/or camera with the buttons at the bottom. * Minimize the default presentation with the "screen" button, bottom right. * If you’d like to share your screen or upload a file, you can make yourself the presenter: Click on your user name, change the setting, then you’ll see the "screen sharing" button beside the camera button; also there’s now "manage presentations" behind the "plus" button. Beware there is only one presenter at a time, so don’t kill someone else’s presentation. [Technical hints] * Sound is usually better if you use a headset (less noise for everyone). * Connection problems are mostly due to low bandwidth or high latency on your side, e.g. with mobile connections. * If audio/video doesn’t work for you, you can still use the text chat. * Screen sharing needs a lot of bandwidth. * BigBlueButton documentation applies: https://bigbluebutton.org/teachers/tutorials/ [Netiquette] * Please use a name that we recognize from here. Some feel uncomfortable with anonymous lurkers. * Mute your microphone while you’re not talking. * It’s nice to show your face at least when you join. * If there are connection problems, stop camera sharing. * The room is set to “everyone’s a moderator“, I trust you...

3 6

text over text
by Alan Bowen 11 Dec '23

11 Dec '23

Alan Bowen schrieb am 11.12.2023 um 19:14: ... <https://mailman.ntg.nl/archives/list/ntg-context@ntg.nl/thread/UGT4DKIJ7OJK…> I am typesetting some transliterated medieval German and need to place one letter, e.g., an “e” in scriptsize over another letter, e.g., a “u” in text size. I have managed to get this in italics using \mathstackers and \definemathmatrix, but I need both letters in roman face and at text size. Is there a way to do this or would another approach be better? \ruby{e}{u} Wolfgang Thank you, Wolfgang. That’s got it nicely! Alan

1 0

text over text
by Alan Bowen 11 Dec '23

11 Dec '23

I am typesetting some transliterated medieval German and need to place one letter, e.g., an “e” in scriptsize over another letter, e.g., a “u” in text size. I have managed to get this in italics using \mathstackers and \definemathmatrix, but I need both letters in roman face and at text size. Is there a way to do this or would another approach be better? Alan

2 1

Re: Fractions (was \placefigure[location=here...] problem)
by Wolfgang Schuster 11 Dec '23

11 Dec '23

Fabrice Couvreur schrieb am 09.12.2023 um 17:19: > Very clear ! > In typography for Mathematics books, what choice should we make for > the best possible result ? A question better answered by Mikael or Aditya! Wolfgang

4 4

margin bigger than backspace pushes it outside the edge
by Jigé 10 Dec '23

10 Dec '23

Hi all, I've been struggling with basic page layout. The left margin extends outside the left edge of the page. Example (from the wiki): \setuppapersize[A4][A4] % this is the default and may be omitted \setuplayout[backspace=20mm, width=110mm, topspace=20mm, header=0mm, footer=0mm, height=250mm] \starttext \showlayout \stoptext Another example: \setuppapersize[A5][A4] \setuplayout[location=middle] \usemodule[ipsum] \starttext \showframe \ipsum \stoptext Thanks, Jean-Guillaume

3 3

Fractions (was \placefigure[location=here...] problem)
by Wolfgang Schuster 10 Dec '23

10 Dec '23

anton.chigurh(a)mail.com schrieb am 09.12.2023 um 14:15: > I worked, ;-), thanks. > Let me ask you another thing, how can I avoid messing up the > line spacing by using \sqrt and \frac, the line that follows these has increased > line spacing in the pdf output > > code: > Find the normal and shearing stresses on an oblique plane defined by > $l=\sqrt{\frac{3}{13}}$, $m=\sqrt{\frac{1}{13}}$, and $n=\sqrt{\frac{9}{13}}$. Complete working minimal examples are preferred over code snippets. To avoid single lines with different spacing you can either increase the line spacing for all lines with \setupinterlinespace or you use a different fraction command which uses smaller numbers or creates inline fractions. \starttext \startlines \type{\frac{1}{3}}: \m{\frac{1}{3}} \type{\xfrac{1}{3}}: \m{\xfrac{1}{3}} \type{\xxfrac{1}{3}}: \m{\xxfrac{1}{3}} \type{\tfrac{1}{3}}: \m{\tfrac{1}{3}} \type{\sfrac{1}{3}}: \m{\sfrac{1}{3}} \type{\frac{1}{3}}: \m{\frac{1}{3}} \type{\dfrac{1}{3}}: \m{\dfrac{1}{3}} \type{\cfrac{1}{3}}: \m{\cfrac{1}{3}} \type{\vfrac{1}{3}}: \m{\vfrac{1}{3}} \type{\hfrac{1}{3}}: \m{\hfrac{1}{3}} \stoplines \stoptext Wolfgang

6 6

Problem with \startlinenumbering left and right arguments
by Marcus Vinicius Mesquita 09 Dec '23

09 Dec '23

Dear List, In the MWE below, the left and right arguments are not applied in the last chapter. How can this be fixed? \starttext \startlinenumbering[left={[},right={]}] \dorecurse{5}{% \startchapter[title={Knuth}] \samplefile{knuth} \stopchapter } \stoplinenumbering \stoptext Kind regards Marcus Vinicius -- Todas as coisas fatigam o corpo, salvo a música, que não fatiga nem o corpo nem seus membros, por ser descanso da alma, primavera do coração, distração do aflito, entretenimento do solitário, e viático do viajante. Kunnâsh al-Hâ'ik (Cancioneiro de al-Hâ'ik)

2 1

\placefigure[location=here...] problem
by anton.chigurh＠mail.com 09 Dec '23

09 Dec '23

Hi all, I am generating a quiz, with eight questions, each with text and a figure following it. The output was fine till the fifth question, but then the margin separating the text of each question disappeared and the figure got put on the next page one after the other. Can anyone suggest what I could be doing wrong? Do I need to increase the buffer? how? This is what I have used to place each figure \startplacefigure[location=here,reference=fig:blah][]{} \externalfigure[blah.jpeg][scale=300] \stopplacefigure

2 2