- ntg-context - Mailing Lists

outer floats on doublesided pages
by R. Ermers 01 Oct '13

01 Oct '13

Dear all, I have problems with the placement of floats. I need them to be placed in the outer edge of the text, but Context puts them in the middle of the page. The outer, inner, outeredge, inneredge, commands do not work. Right and left do work. Preferably the criterium option should also work, e.g. criterium=0.67. A minimal test file is attached. Try it out with a dummy, or with cow picture, or with any other picture of your liking. I updated my context installation today to a bèta version. The version is: 2013.08.30 02.05. All help is welcome! Many thanks in advance, Robert %%%%%%%%%%%%%%%%%% \setuppapersize[A4][A4] \setuppagenumbering[alternative=doublesided,location=footer] \definefloat[edgefigure][figure] \setupfloat [edgefigure] [leftmargindistance=-\outercombitotal, rightmargindistance=-\outercombitotal, default={outer,none,low,high}] \setupcaption[edgefigure][number=no] \useexternalfigure[cow][./cow.pdf] \starttext \startsection[title={insight},reference=insight] \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} When the first volume of Donald Knuth's The Art of Computer Programming was published in 1969, it was typeset using hot metal type set by a Monotype Corporation typecaster with a hot metal typesetting machine from the 19th century which produced a "good classic style" appreciated by Knuth. When the second edition of the second volume was published, in 1976, the whole book had to be typeset again because the Monotype technology had been largely replaced by photographic techniques, and the original fonts were no longer available.[4] When Knuth received the galley proofs of the new book on 30 March 1977, he found them awful.[5] Around that time, Knuth saw for the first time the output of a high-quality digital typesetting system, and became interested in digital typography. The disappointing galley proofs gave him the final motivation to solve the problem at hand once and for all by designing his own typesetting system. On 13 May 1977, he wrote a memo to himself describing the basic features of TeX.[6] \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} He planned to finish it on his sabbatical in 1978, but as it happened the language was not frozen until 1989, more than ten years later. Guy Steele happened to be at Stanford during the summer of 1978, when Knuth was developing his first version of TeX. When Steele returned to MIT that autumn, he rewrote TeX's I/O to run under the ITS operating system. The first version of TeX was written in the SAIL programming language to run on a PDP-10 under Stanford's WAITS operating system. For later versions of TeX, Knuth invented the concept of literate programming, a way of producing compilable source code and cross-linked documentation typeset in TeX from the same original file. The language used is called WEB and produces programs in DEC PDP-10 Pascal. \placeedgefigure[][]{}{\framed[frame=off]{\externalfigure[cow][scale=150]}} When the first volume of Donald Knuth's The Art of Computer Programming was published in 1969, it was typeset using hot metal type set by a Monotype Corporation typecaster with a hot metal typesetting machine from the 19th century which produced a "good classic style" appreciated by Knuth. When the second edition of the second volume was published, in 1976, the whole book had to be typeset again because the Monotype technology had been largely replaced by photographic techniques, and the original fonts were no longer available.[4] When Knuth received the galley proofs of the new book on 30 March 1977, he found them awful.[5] Around that time, Knuth saw for the first time the output of a high-quality digital typesetting system, and became interested in digital typography. The disappointing galley proofs gave him the final motivation to solve the problem at hand once and for all by designing his own typesetting system. On 13 May 1977, he wrote a memo to himself describing the basic features of TeX.[6] He planned to finish it on his sabbatical in 1978, but as it happened the language was not frozen until 1989, more than ten years later. Guy Steele happened to be at Stanford during the summer of 1978, when Knuth was developing his first version of TeX. When Steele returned to MIT that autumn, he rewrote TeX's I/O to run under the ITS operating system. The first version of TeX was written in the SAIL programming language to run on a PDP-10 under Stanford's WAITS operating system. For later versions of TeX, Knuth invented the concept of literate programming, a way of producing compilable source code and cross-linked documentation typeset in TeX from the same original file. The language used is called WEB and produces programs in DEC PDP-10 Pascal. \stopsection \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ______________________________________________________________________________________________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

6 13

Breaks in TOC
by "H. Özoguz" 01 Oct '13

01 Oct '13

Hi there, two questions about formatting the TOC or the titles in the TOC: 1. How to formate the titles different in the text and in the TOC respectively? I only mean line breaks. E.g., see this minexample: \starttext \completecontent \startsection[ title={Eine sehr, sehr lange Überschrift, die auf jeden Fall irgendeine Art von Formatierung benötigt}, label={Eine sehr, sehr lange Überschrift,\\die auf jeden Fall irgendeine Art von Formatierung benötigt}, marking={Eine sehr, sehr lange Überschrift,\\die auf jeden Fall irgendeine Art von Formatierung benötigt}] \stoptext That does not work, label and marking are the wrong keys for setting the TOC-Title, which have no effect on the title in the toc, which one is the correct key? 2. How to prevent page-breaks after some title in the TOC? E.g. I have a chapter title in the toc, and after chapter-titles there should be no immediate page-break. So I would need something like \testpage[10], but for the toc. How to do this? Thanks again. Huseyin

1 0

question about linespace adjustment
by Lars Huttar 30 Sep '13

30 Sep '13

Hello, I'm working through the reference manual trying to understand how things work in regard to fonts. I'll be submitting clarifications and elaborations to the manual in an attempt to help other non-experts to grasp the design of ConTeXt. There's a point that's confusing to me in section 5.5, Line spacing. On page 108 of the manual it says "Linespacing alters when a new bodyfont is used or when linespacing is deﬁned explicitly by \setupinterlinespace (which is explained later)" But on the next page it says, "When you make a font switch the linespacing is adapted when you give the command \setupinterlinespace without any setup parameters and also when you add the key reset, for example..." So here's why I'm confused. When you change fonts, (a) does linespacing get changed automatically, or (b) do you have to say \setupinterlinespace? If (a), then why does the second quote above seem to say you need \setupinterlinespace to make it happen? If (b), then isn't the first quote above inaccurate? Is there a distinction being drawn here between "when a new bodyfont is used" and "when you make a font switch", or are those just variant phrasings for what is intended to mean the same thing? Thanks for your help, Lars

4 13

beta
by Hans Hagen 30 Sep '13

30 Sep '13

Hi, I uploaded a new beta (still catching up from last week). The core now has the simplefonts-turned-fontselector code included but only those present last week have the edge of knowing how to use it unless WS decides to reveal its secrets and/or LS undiscloses it by posting source code. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

What do \start and \stop mean?
by Lars Huttar 30 Sep '13

30 Sep '13

I found \start and \stop referenced in the context reference manual (e.g. section 5.5). While \startXYZ - \stopXYZ pairs are discussed earlier, I can't find any place that \start and \stop (with no suffix) are described. They seem to be used like \bgroup and \egroup. Is that right? They are defined in core-sys.mkiv, but I can't figure out from there what they actually do. I'll contribute documentation for them if someone can tell me what they mean. Thanks, Lars

3 4

Find all words set into the margin
by "H. Özoguz" 30 Sep '13

30 Sep '13

I use \definefontfeature[default][default][expansion=quality,protrusion=quality] \setupalign[hz,hanging] \usetypescript[times] \setupbodyfont[times,11pt] \setuptolerance[verystrict] Is there a command or a macro to find all occurences in a file (or projekt), where some word is printed into the margin? (Maybe because of bad hyphenation or something else.) - Would be perfect for manual check-up and corrections! Thanks. Huseyin

3 2

ConTeXt Meetings come and go
by Taco Hoekwater 30 Sep '13

30 Sep '13

Hi all, We just finished the ConTeXt meeting in Brejlov. Once again, it was a great pleasure to meet in person. A big "thank you!" to Jano Kula is in order for organizing yet another flawless meeting! ---- Now looking forward; at the annual members meeting of the ConTeXt Group in Brejlov, the location for the next meeting (the eight one already) was decided, we will go back to the same place we were at in 2011. 't Sjetootje in Bassenge-Boirs, Belgium. Good food, nice beers, a quirky location and a very friendly host should make for a perfect return visit in 2014! Registration is not open yet as I have to figure out the correct pricing levels first and that will take a few months, but the date is firmly set already: Monday evening September 8 -- Saturday morning September 13, 2014 More news will be posted once it becomes available. Best wishes, Taco http://meeting.contextgarden.net/2014 http://group.contextgarden.net/

1 0

fake feature “extend” behaving weirdly
by Philipp Gesang 30 Sep '13

30 Sep '13

Hi Hans, this got posted on the DANTE list today. \definefontfeature [quite_wide] [extend=1.5] \definefont [mainfont] [file:Iwona-Regular.otf] \definefont [widefont] [file:Iwona-Regular.otf*quite_wide] \starttext \mainfont {\widefont foo} %% comment this line and “bar” is fine bar {\widefont baz} \stoptext The example defines two fonts with the same base font. If the scaled variant is used before the regular one then the latter will appear scaled as well and the spacing (bboxes?) gets messed up. I suspect a relation to this old issue: http://tracker.luatex.org/view.php?id=829 but if I substitute “slant” for “extend” the behavior is different. Best, Philipp

2 2

PDF Transparency and ConTeXt
by Thangalin 29 Sep '13

29 Sep '13

Hi, I have written up a question on TeX.SE: http://tex.stackexchange.com/questions/135543/pdf-colour-space-and-context Aditya mentioned that the problem with transparencies is that it is likely a known bug with Adobe Acrobat Reader: "I remember similar questions being asked in the past, and the conclusion was that it was a known bug in Adobe Reader." Has anyone else come across this issue and found a way to resolve it in ConTeXt? I ran into what I think is a similar issue with LaTeX and was able to resolve it using the following command in the preamble: \pdfpageattr{/Group << /S /Transparency /I true /CS /DeviceRGB>>} I have not yet tried to reproduce the problem in either LuaLaTeX or LaTeX. Kindest regards.

3 3

mtx-context - extraordinarily quiet mode
by Thangalin 29 Sep '13

29 Sep '13

Hi, I ran the following: context --noconsole --batchmode --nonstopmode filename.tex This wrote information to the console: This is LuaTeX, Version beta-0.76.0-2013040516 (rev 4627) \write18 enabled. Underfull \hbox (badness 2401) in paragraph at lines 464--464 ... lots more output ... system | total runtime: 1.962 How do you prevent ConTeXt from writing anything whatsoever to the console? Kind regards.

3 4

Bugfix in strc-doc
by Aditya Mahajan 29 Sep '13

29 Sep '13

\somenameheadnumber{whatever}{last} gives an error if the head 'whatever' hasn't been used. This can be avoided using - if data then + if data and data.references then in line 772 of strc-doc.lua. Aditya

1 0

Module documentation broken
by Marco Patzer 28 Sep '13

28 Sep '13

Hi, the module documentation is broken when it contains certain macros, e.g. \METAPOST. mtxrun --script modules --process auto:meta-pag.mkiv yields pages > flushing realpage 1, userpage 1 pages > flushing realpage 2, userpage 1 error: .../context/tex/texmf-context/tex/context/base/node-fnt.lua:129: attempt to index field '?' (a boolean value) system > tex > error on line 20 in file ../meta-pag-mkiv.ted: ? ... Marco

1 0

ConTeXt Manual Errata
by Thangalin 27 Sep '13

27 Sep '13

Hi, During a recent plane ride, I started to read the ConTeXt manual to get a better understanding: http://www.ctex.org/documents/context/cont-enp.pdf If anyone has plans to revise it, I have attached a file with corrections, specific comments, and general comments. I did not have the ConTeXt manual source code on hand, so I could not directly modify it. Take the comments with a grain of salt: I have little ConTeXt experience. I hope it proves useful. Kindest regards.

9 24

bug with font
by Prashanth 27 Sep '13

27 Sep '13

Hello, I update my ConTeXt setup about every couple of weeks. I use Ubuntu font in some of my documents. My setup from 2013-09-11 was selecting the specified fonts correctly. However my setup from 2013-09-25 (today) selects "Ubuntu Light" when I specify just "Ubuntu". When I specifically ask it to use "Ubuntu Regular", it forces this weight everywhere (including places where I specify \em). I have attached a minimal example and sample PDF and log files from both versions. Best regards, Prashanth

2 2

tabulate and tolerance
by Peter Münster 26 Sep '13

26 Sep '13

Hi, It seems, that tabulate does not use the tolerance setting: --8<---------------cut here---------------start------------->8--- \setbreakpoints[compound] \setuptolerance[stretch] \starttext \starttabulate[|p(1cm)|l|] \NC bla-blabla-bla \NC XXX \NC \NR \stoptabulate \hsize1cm bla-blabla-bla \stoptext --8<---------------cut here---------------end--------------->8--- For now, my workaround is "\NC \setuptolerance[stretch] bla-blabla-bla \NC" Is there anything better? TIA for any hints, -- Peter

2 1

Questions about "natural tables"
by MANUEL GONZALEZ SUAREZ 26 Sep '13

26 Sep '13

Hello everyone On page ConTeXt Garden is recommended the use of "natural tables". My questions are: how do the tables are centered on the page? Can you change the size of the tables? Can you include label and caption? Thanks for your time. Manuel Gonzalez

2 2

error when installing ConTeXt Standalone
by Pablo Rodríguez 25 Sep '13

25 Sep '13

Dear list, I have installed a system-wide ConTeXt Standalone in Fedora 19, following the instructions from the wiki. But when I try to rebuild the font cache, I get the following error (with option verbose): resolvers | resolving | remembering file 'font-otp.lua'cannot open : No such file or directory I don’t know what I’m doing wrong, but I get the error as root also. Could anyone tell me what it’s wrong here? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Re: [NTG-context] Conditional float references
by Robert Blackstone 24 Sep '13

24 Sep '13

On 24 Sep 2013, at 19:43 , Marco Patzer <lists(a)homerow.info>l wrote: > > > On 2013?09?24 Robert Blackstone wrote: > >> I reproduce the error message here, hoping that you, or somebody >> elsm, can see what I did wrong. > > I used mkvi style macros. Either place the following into the first line > > %% macros=mkvi > > or change the file extension to mkvi. > > Marco That did the trick. Thank you very much. This is a very useful addition to the ConTeXt toolkit, imho. Best regards, Robert Blackstone

1 0

Re: [NTG-context] Conditional float references
by Robert Blackstone 24 Sep '13

24 Sep '13

On 23 Sep 2013, at 09:57 , Marco Patzer <lists(a)homerow.info> wrote: > Subject: [NTG-context] Conditional float references > > a couple of times the question came up??? how to create more > intelligent referencing. > [….] > I don't know if there's interest in integrating such functionality > into the core. I attached some code, a new macro \smartref, which > takes the same arguments as \in. > Hi Marco, I would be very interested in being able to use this macro, integrated or not, since in my project there are numerous figures with lots of references to them throughout the entire text, and \at{page}[] is not satisfactory for me. I tried the code you supplied by pasting the whole lot into a TeXShop-file, and, when that did not work, in Alphax, processing the latter from Terminal, but in both cases I received an error message that I do not know what to do with. Strangely enough it complains about an error in line 1 even if that contains a commented out comment. I reproduce the error message here, hoping that you, or somebody elsm, can see what I did wrong. (I apologize on behalf of TeXShop and Alhax for the length of this message.) Thanks in advance for any help. Robert Blackstone Error message: ------------------------------------------------------------------------------------------------------------ Last login: Tue Sep 24 09:02:03 on ttys000 sh: /Users/robertblackstone/context/tex/setuptex: No such file or directory iMac-Bergen-R-5:context-minimal-24-09 robertblackstone$ . /Users/robertblackstone/context-minimal-24-09/tex/setuptex Setting "/Users/robertblackstone/context-minimal-24-09/tex" as ConTeXt root. iMac-Bergen-R-5:context-minimal-24-09 robertblackstone$ context /Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1.tex mtx-context | run 1: luatex --fmt="/Users/robertblackstone/context-minimal-24-09/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="Referencing-Smart_referencing-test1" --lua="/Users/robertblackstone/context-minimal-24-09/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="/Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1.tex" --c:input="/Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1.tex" --c:kindofrun=1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.76.0-2013040508 (rev 4627) \write18 enabled. (/Users/robertblackstone/context-minimal-24-09/tex/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2013.09.21 13:53 MKIV beta fmt: 2013.9.24 int: english/english system > 'cont-new.mkiv' loaded (/Users/robertblackstone/context-minimal-24-09/tex/texmf-context/tex/context/base/cont-new.mkiv) system > files > jobname 'Referencing-Smart_referencing-test1', input '/Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1', result 'Referencing-Smart_referencing-test1' fonts > latin modern fonts are not preloaded languages > language 'en' is active (/Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1.tex ! Parameters must be numbered consecutively. system > tex > error on line 1 in file /Users/robertblackstone/Dropbox/C-tests/Referencing-Smart_referencing/Referencing-Smart_referencing-test1.tex: Parameters must be numbered consecutively ... 1 >> \unprotect 2 \unexpanded\def\strc_references_smart 3 {\strc_references_start_goto 4 \let\currentreferencecontent\currentreferencedefault 5 \strc_references_pickup_smart_goto} 6 \def\strc_references_pickup_smart_goto 7 {\dodoublegroupempty\strc_references_pickup_goto_smart_indeed} 8 \starttexdefinition strc_references_pickup_goto_smart_indeed #left#right#dummy[#label] 9 \leftreferencetoks 10 \iffirstargument 11 {#left} <to be read again> l l.1 ...ferences_pickup_goto_smart_indeed\endcsname#l eft#right#dummy[#label] \ctxcommand #1i-\directlua {commands.#1} \syst_helpers_start_tex_definition_two ...n("#1")} {#2} l.32 \stoptexdefinition ? ------------------------------------------------------------------------------------------------------------

2 1

Mixedcolumns maximum height for vertical rule: bug?
by Thangalin 24 Sep '13

24 Sep '13

Hi, The horizontal rule for the first page extends to the bottom of the page, but does not do so on the second page. How do you prevent the vertical rule from extending to the bottom of the page? \usemodule[ipsum] \setuplayout[ topspace=\zeropoint, height=fit, width=fit, % Allow text to be flush with the bottom. %footerdistance=2cm,] \definemixedcolumns[StyleColumns][ frame=off, separator=rule, rulecolor=black, alternative=global, %maxheight=\textheight,] % Set up two-column mode for the ingredients, instructions, etc.\setuphead[section][ after={\startStyleColumns}, aftersection={\stopStyleColumns},] \def\StylePageNumber#1{% {\inframed[ frame=off, background=color, backgroundcolor=red, width=2em, height=2em, ]{#1}}} \setuppagenumbering[location=inright,command=\StylePageNumber,] \starttext\startchapter[title=Chapter] \startsection[title=Section] \input knuth \input zapf \ipsum \input knuth \input knuth \input zapf \stopsection\stopchapter\stoptext For further details, see: http://tex.stackexchange.com/q/134750/2148 Kindest regards.

1 0

\sqrt[a]{b} with a more than one digit
by Xan 23 Sep '13

23 Sep '13

Hi, \sqrt[12]{a^{11}} produces me: \sqrt[1]{2} a^{11} What happens there? Xan.

3 3

Confounding colour conundrums
by Thangalin 23 Sep '13

23 Sep '13

Hi, In the attached example, I thought the word *Website* should be *orange*, but it is *blue*. If *color=blue* is removed (from \setupinteraction[state=start]), then the word *Website* is *dark green*, which is also unexpected, because the only place *dark green* occurs is in the setuplist for the chapter's page number (i.e., pagecolor=darkgreen). It appears that the default colour for links embedded with \useurl bucks trendy traditional *blue* hyperlinks, favouring *dark green*. (*Black* would also make sense as a default.) I am confounded because the code explicitly contains the line: \setupurl[color=orange] I thought that that would set the external hyperlink colour to *orange*. In the same document, how do I set: - hyperlink colours to *orange*; - index page number colours to *red*; - table of contents text to *dark cyan*; and - table of contents page numbers to *dark green*. Many thanks. Kindest regards.

1 2

[[wnsOTaa] Dr. Donald E. Knuth to be honored with third Dr. Peter Karow Award during ATypI Amsterdam
by luigi scarso 22 Sep '13

22 Sep '13

https://blogs.adobe.com/typblography/2013/09/dr-peter-karow-award.html PS: [wnsOTaa] (well, not so Off Topic after all ) -- luigi

1 0

diameter symbol in ConTeXt?
by Xan 21 Sep '13

21 Sep '13

hi, In LaTeX: http://osl.ugr.es/CTAN/info/symbols/comprehensive/symbols-a4.pdf \diameter produces a diameter symbol. What is the equivalent in ConTeXt? Is there any compilation of symbols avaliable in ConTeXt? I can't find no references. Xan.

5 8

deeptextcommand and firstcharacter
by Thangalin 21 Sep '13

21 Sep '13

Hi, The attached file does not compile in ConTeXt. However, if the \placeindex is substituted for \completeindex, then the document compiles. Any idea how to use a deeptextcommand and firstcharacter as shown in the attachment while also using the firstcharacter macro? Thank you. Kindest regards.

3 8