- ntg-context - Mailing Lists

Strange behavior in a table.
by Fabrice Couvreur 29 Aug '14

29 Aug '14

Everything is in the title, thank you. \starttext \`A l'aide du graphique, compléter les tableaux de correspondance suivants. \blank[small] {\setupTABLE[row][even][height=0.6cm] \setupTABLE[row][odd][height=0.6cm] \setupTABLE[1][1,2][width=3.2cm] \setupTABLE[column][2,3,4,5,6,7][width=0.14\textwidth] \bTABLE[align={middle,lohi}] \bTR \bTH {Hauteur en dm} \eTH \bTD {0} \eTD \bTD {0,5} \eTD \bTD {1} \eTD \bTD {1,5} \eTD \bTD {2} \eTD \bTD {2,5} \eTD \eTR \bTR \bTH {Volume d'eau en L} \eTH \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \eTR \eTABLE \blank[small] \bTABLE[align={middle,lohi}] \bTR \bTH {Volume d'eau en L} \eTH \bTD {1} \eTD \bTD {2} \eTD \bTD {3} \eTD \bTD {4} \eTD \bTD {5} \eTD \bTD {10} \eTD \eTR \bTR \bTH {Hauteur en dm} \eTH \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \bTD {} \eTD \eTR \eTABLE} Les graduations obtenues n'étant pas assez fines, Pascal demande à son gendre de préciser ses calculs. La suite de l'histoire ...plus tard. \stoptext

3 2

hyperlinks with special characters
by Prashanth N Rao 29 Aug '14

29 Aug '14

I have already asked this question on Stackexchange. It appears that no one who has seen the question knows an answer. I figure I'll ask here too, just to cover all bases. I need to link to some online resources in my PDF file. Based on the official documentation, I have written: > \useURL[dbdk] [http://dbpedia.org/page/The_Dark_Knight_(film)] [] [it's link to DBPedia] > > Lorem ipsum \goto{the LinkedMDB.org entry on The Dark Knight}[url(http://data.linkedmdb.org/page/film/6224)], and \from[dbdk] dolor sit amet. Note my code for the link to DBpedia: I had to write it in this convoluted way, instead of using my preferred \goto, because the link has the special characters, `(` and `)`. These characters interfered with `url()`. I can't use HTML's URL encoding scheme because the `%`s interfere with TeX. Is there another escape code format in ConTeXt for use within `\goto{...}[url(...)]`? Using the suggestion by @phg, I tried the following: > \startasciimode > Lorem ipsum \goto{the LinkedMDB.org entry on The Dark Knight}[url(http://data.linkedmdb.org/page/film/6224)], and \goto{it's link to DBPedia}[url(http://dbpedia.org/page/The_Dark_Knight_%28film%29)] dolor sit amet. > \stopasciimode I still had to use escape codes, `%28` and `%29`, to keep it from interfering with url(). It turns out that DBpedia does not like these codes, and requires the actual characters. Is there another way I put them in `\goto{...}[url(...)]`? Thanks! Prash

2 2

Itemize and framed
by Fabrice Couvreur 29 Aug '14

29 Aug '14

Hi, Is this the best way to insert a list in a frame ? thank you, Fabrice \setupcolors[state=start] \definecolor[H1prime][c=0.50, m=0.00, y=1.00, k=0.00] \definecolor[H4][c=0.07, m=0.00, y=0.15, k=0.00] \starttext \framed[corner=06,frame=on,framecolor=H1prime,location=middle,background=color,backgroundcolor=H4]{% \rbox{ \startitemize[1] \item planter le piquet 1 à côté de l'arbre 1 ; \item aligner le piquet 1, le piquet 2 et les deux arbres puis fixer les piquets 3 et 4 ; \item se placer de manière à être aligné avec l'arbre 2 et le piquet 3 d'une part ; et avec l'arbre 1 et le piquet 4 d'autre part. \item mesurer sa distance à l'arbre 1 ; \item rechercher, dans le tableau, la distance correspondante entre les deux arbres. \stopitemize}} \stoptext

4 4

Startparagraph oddities
by Rik Kabel 29 Aug '14

29 Aug '14

There appears to be an inconsistency in the implementation of \startparagraph. When it is used with one argument (or two by my reading of the source) it defines \stopparagraph with a terminal \endgraf, yet with no arguments this is not done. Strangely (to me) it also appears to insert a line-break before \startparagraph[]. The example below demonstrates these issues. I would expect to have \endgraf inserted with each \stopparagraph regardless of the argument count. There is also a wiki issue with overloading of the command name \startparagraph. The existing command entry points to the paragraphs mechanism for setting up parallel paragraphs in columns. There is also a \startParagraph command described for the t-pararef module. There is no mention of \startparagraph in the \startsection page, which might be an appropriate place. Perhaps some Wikipedia-style disambiguation mechanism is needed. \starttext \startparagraph One \stopparagraph \startparagraph Twee \stopparagraph \startparagraph Drie \stopparagraph \startparagraph[] One \stopparagraph \startparagraph Twee \stopparagraph \startparagraph Drie \stopparagraph \stoptext -- Rik Kabel

2 1

XML, XHTML, and HTML export issue with & in URL
by Rik Kabel 28 Aug '14

28 Aug '14

With the following example, the output xml writer fails to properly transform & to the html entity & in some urls; \hyphenatedurl works fine. The generated xhtml and html files have this problem as well as more issues with the transformation, including what appears to be mistaken transformation of < and > to html entities and unbalanced <link> tags. When a URL without & is used, the problems do not appear. I used the default export-example.css file, and I assume that the lack of interaction in the result reflects the lack of coding for links in that file. This was tested with the 2014-08-27 standalone. \setupbackend[export=xmltest.xml,xhtml=xmltest.xhtml,css=export-example.css] \setupinteraction[state=start] \useURL[avecAmpersand] [http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub] [][klik hier] \starttext \startsubject[title=Fails in xml] \startparagraph \tex{from}: \from[avecAmpersand] \stopparagraph \startparagraph \tex{goto&[url]}: \goto{klik hier}[url(http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub)] \stopparagraph \stopsubject \startsubject[title=Okay in xml] \startparagraph \tex{url}: \url[avecAmpersand] \stopparagraph \startparagraph \tex{hyphenatedurl}: \hyphenatedurl{http://www.mail-archive.com/search?l=ntg-context@ntg.nl&q=Epub} \stopparagraph \stopsubject \stoptext -- Rik Kabel

2 1

Font (roboto) and math font - error
by Zenlima 27 Aug '14

27 Aug '14

Hi, I am switching all my docs to the roboto font as I just like the look of that font. During this I ran into a problem with \item: ! Math error: parameter \Umathquad\displaystyle is not set. .. l.26 \item h ere we list the points, In my example: as soon I enable any of the two \definetypeface lines I am running into that error.. even if I only enable the math font. Every hint is welcome :) Here is my example to reproduce the error: ---8<------ \enableregime[utf]  \definefontfeature[fakesc][default][size=.8]  \starttypescript [sans] [roboto]  \definefontsynonym[Sans][name:robotolight][fallbacks=Sans] \definefontsynonym[SansBold][name:robotoregular] \definefontsynonym[SansItalic][name:robotolightitalic] \definefontsynonym[SansSlanted][name:robotolightitalic] \definefontsynonym[SansBoldItalic][name:robotoregularitalic] \definefontsynonym[SansBoldSlanted][name:robotoregularitalic] \definefontsynonym[SansCaps] [name:robotolight][features=fakesc] \stoptypescript \starttypescript [math] [latinmodern] \definefontsynonym[Math][name:latinmodernmathregular] \stoptypescript  \definetypeface[fliesstext][ss][sans][roboto] \definetypeface[fliesstext][mm][math][latinmodern][default]  \setupbodyfont[fliesstext,ss,11pt]  \starttext  \startitemize  \item here we list the points,  \item one after the other.  \stopitemize \stoptext

2 2

changing pre-fuzzy stlye
by Pau 27 Aug '14

27 Aug '14

Dear all, I am preparing a presentation using pre-fuzzy and I would like to make a modification without altering the style if possible. It turns out that the meeting I am attending is not using a projector but a kind of huge monitor with very low frequency and, as a result, a bright background is unpleasent on the eyes because of that frequency. I would like to change the background to black and the text to white. I am unsure where to do this without modifying the main file for the style pre-fuzzy. Any hint will be appreciated. thanks

2 1

\in, \at but without font/color change in the PDF
by Gerben Wierda 26 Aug '14

26 Aug '14

Suppose I want to make a fully classical flat text without interaction (no clickable links in the PDF). How do I get this? If I use \in or \at, ConTeXt turns them into clickable links. That is not my problem so much, but it also changes font to bold and colour to green, and I do not want that. What do I need to do to make the text classic, that is without font and colour change? G

2 1

bibliography problems
by Gerben Wierda 26 Aug '14

26 Aug '14

I have set up: \setuppublications[numbering=short] \setupcite[short] but the \cite commands show (Author, Year) and not the short code and the \placepublications does not indent the entries enough, hence the item entry’s first column (the short code) overlaps with the actual entry. How do I fix these? Can’t find it on the wiki or in the bibmod-doc.pdf G

1 1

issues with footnotes
by Pablo Rodriguez 25 Aug '14

25 Aug '14

Dear list, using beta from 2014-08-21 09:59, I’m trying to generate a document that has two bodies of notes: footnotes and linenotes. Since the document isn’t minimal, I include only the notes definitions: \definenote[dict] \setupnote[dict][setups=setups:linenote, n=2, rule=off, split=verystrict, scope=text, inbetween=\hskip1.5em] \setupnotation[dict][number=no, width=broad] \definelinenote[grammatical] \setupnote[grammatical][setups=setups:linenote, rule=off, paragraph=yes, split=verystrict, scope=text, inbetween=\hskip1.5em, compress=yes] \setupnotation[grammatical][numbercommand=, alternative=serried, distance=1em] The output can be found at http://www.ousia.tk/unbalanced-columns.pdf. In all four pages, columns in footnotes are unbalanced. Is there any way to get balanced columns in footnotes? The second issue is that the columnar footnotes don’t respect space before and after defined in \setupnote. How can I avoid this? (BTW, this also happens with the space before when paragraph=yes.) BTW, if I add the following code to avoid widows and orphans: \setuplayout[setups=*lessstrict] \startsetups[*lessstrict] \setup[reset] \widowpenalty=10000 \clubpenalty=10000 \brokenpenalty=0 \stopsetups The footnotes aren’t displayed in columns at all (http://www.ousia.tk/no-columns.pdf) Is there no way that I can avoid widows and orphans for the body text? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

Multi-page centered natural TABLE
by Christoph Reller 25 Aug '14

25 Aug '14

Hi! How do I use a natural table to produce a table which is both: - distributed across multiple pages (split=yes) and - centered horizontally on each page. I did try the following but it only works if split=no. \starttext \startalignment[middle]\dontleavehmode% \bTABLE[split=yes] \bTABLEhead \bTR\bTH Thing \eTH\bTH Desc \eTH\eTR \eTABLEhead \bTABLEbody \dorecurse{40}{\bTR\bTD Foo \eTD\bTD Text. \eTD\eTR} \eTABLEbody \eTABLE \stopalignment \stoptext Thank you for any help. Christoph

2 1

Using simplefonts and font protrusion in MKIV
by john Culleton 24 Aug '14

24 Aug '14

How do I combine simplefonts and font protrusion using a font family like Minion for the main font and Myriad for the sans? I have both texlive 2014 and stand alone context dated about June 8. I can use either. -- John Culleton

2 1

Re: [NTG-context] Fany break - no solution?
by Akira Kakuto 24 Aug '14

24 Aug '14

> The first and the second line are processed without problems. The third command produces some output and hangs then after > ?language 'en‘ is enabled?. After terminating with ^C, I get this: Sorry. You should first make and edit the files mkiiexample.tex and mkivexample.tex in the current directory. Thanks, Akira

2 1

Fany break - no solution?
by Akira Kakuto 24 Aug '14

24 Aug '14

> Who can tell me what to do? Try on the terminal /usr/local/texlive/2014/bin/x86_64-darwin/context --generate /usr/local/texlive/2014/bin/x86_64-darwin/texexec mkiiexample.tex /usr/local/texlive/2014/bin/x86_64-darwin/context mkivexample.tex If the path is different, use your own path. Best, Akira

2 1

Fany break - no solution?
by Werner Hintze 23 Aug '14

23 Aug '14

May be it’s my fault, but I didm’ see any solution for this strange problem with the fancy break module. I must say that I didn’t the end of the conversation because it was to technical. So I don’t know yet: Is it my fault, must I change something? Or is it a problem with TexLive? Who can tell me what to do? Thanks!

1 0

Forcing a subheading page break
by Idris Samawi Hamid ادريس سماوي ح امد 23 Aug '14

23 Aug '14

Dear Syndicate, \setuphead[chapter,section,subsection][page=yes] does not force the first subheading to have its own page: See attached, pages~1, 4, and 7... What do I need to get *every* heading in \setuphead to be started on a new page, including the first instance? Thanks and Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

2 1

\stopquotation and \endnote
by Gerben Wierda 22 Aug '14

22 Aug '14

Is it possible to use \startquotation..\stopquotation and have an endnote number follow the closing ''? If the \endnote is before \stopquotation, it ends up inside the '' character at the end. If it is after \stopquotation, it becomes the beginning of the next paragraph. G

2 3

MKIV bibliography: attempt to index local 'used' (a nil value)
by Enrique Jiménez Gallego 22 Aug '14

22 Aug '14

Hi, I get the following error with the latest beta (Arch Linux, Lua 5.2.3): ConTeXt ver: 2014.08.21 09:56 MKIV beta fmt: 2014.8.22 int: english/english .../context/tex/texmf-context/tex/context/base/publ-ini.lua:650: attempt to index local 'used' (a nil value) stack traceback: .../context/tex/texmf-context/tex/context/base/publ-ini.lua:650: in function 'enhance' .../context/tex/texmf-context/tex/context/base/publ-dat.lua:151: in function '__index' .../context/tex/texmf-context/tex/context/base/publ-ini.lua:1349: in function 'btxpreparelistentries' [\directlua]:1: in main chunk 1 \usebtxdataset [example][mkiv-publications.bib] 2 \definebtxrendering[example][dataset=example] 3 \starttext 4 \chapter{One} 5 some text.\cite[example::demo-001] 6 >> \placebtxrendering[example][criterium=all] 7 \stoptext 8 9 Minimal example: \usebtxdataset [example][mkiv-publications.bib] \definebtxrendering[example][dataset=example] \starttext \chapter{One} some text.\cite[example::demo-001] \placebtxrendering[example][criterium=all] \stoptext The following patch seems to fix the problem: *** publ-ini.lua.old 2014-08-21 13:53:31.267777602 +0200 --- publ-ini.lua 2014-08-21 13:47:52.967781191 +0200 *************** *** 647,652 **** --- 647,655 ---- local short = formatters["%t%02i"](t,mod(year,100)) local s = shorts[short] -- we could also sort on reference i.e. entries.text + if not used then + used = { } + end local u = used[tag] if u then u = u[1].entries.text -- hm

1 0

[doifinset] how it works ?
by Pierre-François Bonnefoi 22 Aug '14

22 Aug '14

Hello, I'm currently prepping my teaching material for my back-to-university. I want to design some conditional slides based presentation where I can select the slides that I want to show in my final presentation. My current attempt is to use : 1 - MKIV as I use currently only MKII; 2 - a counter is defined, that it is incremented at each slide definition; 3 - a commalist to indicate the slides that I want. The number affected to each slide is made according to its definition in the file and not the slide number displayed; 4 - a block is added to enclosed each slide in order to allow or not it to be shown in the final presentation. \definenumber[slide][way=bytext,prefix=no] % firstly I generate a full commalist \def\slidelist{} \dorecurse{8}{ \doglobal\appendtocommalist{#1}\slidelist } % then I define my slide where I increment the counter \def\startSlide{\setupbackgrounds[page][background={fond,Auteur,backgraphics,foreground,foregraphics}] \directsetup{slide:start}} \def\stopSlide{\directsetup{slide:stop}} \startsetups slide:start \page \incrementnumber[slide] \switchtobodyfont[14pt] \setupinteractionbar[state=start] \startnarrower[left] \stopsetups \startsetups slide:stop \stopnarrower \page \stopsetups \starttext \doifinset{\getnumber[slide]}{\slidelist} { \startSlide \SlideTitleSub{Hello there} What is my number ? \getnumber[slide] ! \stopSlide } \stoptext This doesn't work. the "doifinset" doesn't work. I've tried to put some \expanded in order to expand the arguments with no success. The only way is to use direct argument as : \doifinset{1}{1,2,3,4,5} Let me know it it is possible. best regards, Pierre-François Bonnefoi. -- Bonnefoi Pierre-Francois | E-mail : bonnefoi(a)unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.

3 3

keeping TABLE in hmode
by Idris Samawi Hamid ادريس سماوي ح امد 22 Aug '14

22 Aug '14

Dear gang, Is there a way to configure \bTABLE-\eTABLE so that it always in hmode? Right now I have things like \startalignment[middle] \dontleavehmode \bTABLE \bTR :: \eTR \eTABLE \dontleavehmode \bTABLE \bTR :: \eTR \eTABLE \dontleavehmode \bTABLE \bTR :: \eTR \eTABLE \stopalignment Will have dozens and dozens of these; and don't wish to have to keep typing '\dontleavehmode' over and over... Thanks in advance and Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

2 1

setting math font
by Idris Samawi Hamid ادريس سماوي ح امد 21 Aug '14

21 Aug '14

Dear gang, ====== \setupbodyfont[schola,12pt] \starttext $\Rightarrow$ \stoptext : ! Math error: parameter \Umathquad\displaystyle is not set ====== What do I need to add to get the default cm/lm math invoked? Thanks in advance and Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

2 2

itemize: how to get the first level items indented?
by Gerben Wierda 20 Aug '14

20 Aug '14

I’d like to get \startitemize\stopitemize to indent the first level items already with the equal amount of indentation as the start of a paragraph (which is indented). Is there a way to do that? mkii G

3 11

Overriding figure number?
by Gerben Wierda 20 Aug '14

20 Aug '14

I have a few \externalfigure statements where I need to override the automatically produced figure number. How do I do that? G

2 1

Rotate does not work on externalfigure
by Gerben Wierda 20 Aug '14

20 Aug '14

\placefigure [] [foo] {Bar} {\externalfigure[foo.pdf][rotation=90]} Does not rotate my figure. It just remains as is. Am I forgetting something? G

2 5

How do I tell \completecontent not to include anything below the \chapter level?
by Gerben Wierda 20 Aug '14

20 Aug '14

See subject. Same question for other levels. G

2 1