- ntg-context - Mailing Lists

regular expression as lua pattern
by Pablo Rodriguez 29 May '24

29 May '24

Dear list, I have the following sample: \starttext \startTEXpage[pagestate=start, offset=1em] \startluacode local str = "this is that" context(str:match("(this|these)")) \stopluacode \stopTEXpage \stoptext In short, I would like to know whether it is possible to have the regular expression (this|these) as a Lua pattern. I mean, I need complete strings and I haven’t found the way to do it. Many thanks for your help, Pablo

4 6

Re: lua error in `strc-lev.lua`
by Sylvain Hubert 29 May '24

29 May '24

I replaced `strc-lev.lua` and rerun `context` but the error message stays the same. `context` command doesn't seem to recognize the change of `strc-lev.lua`. Should I run `mtxrun` or something before? On Tue, 28 May 2024 at 20:20, Hans Hagen <j.hagen(a)xs4all.nl> wrote: > On 5/28/2024 10:48 AM, Sylvain Hubert wrote: > > ConTeXt LMTX version: 2024.05.27 18:16 > > > > Reproducible example: > > > > \definesectionlevels > > [default] > > [section, subsection, subsubsection, subsubsubsection, > subsubsubsubsection] > > > > \starttext > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stoptext > > > > lua error > lua error on line 19 in file ./input.tex: > > > > registered function call [969]: > > ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: attempt > > to index a nil value (field '?') > > stack traceback: > > ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: > > in function > <...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:66> > > (...tail calls...) > can you test with the attached ... (remake the format) > > \starttext > \startsectionlevel[title=level 1] > \startsectionlevel[title=level 2 ] > \startsectionlevel[title=level 3] > \startsectionlevel[title=level 4] > \startsectionlevel[title=level 5] > \startsectionlevel[title=level 6] > \startsectionlevel[title=level 7] > \startsectionlevel[title=level 8] > \startsectionlevel[title=level 9] > \startsectionlevel[title=level 10 ] > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stoptext > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- >

3 3

Re: lua error in `strc-lev.lua`
by Sylvain Hubert 29 May '24

29 May '24

I rerun `install.sh` after replacing `strc-lev.lua` and the error goes away. Thanks Hans! On Tue, 28 May 2024 at 20:20, Hans Hagen <j.hagen(a)xs4all.nl> wrote: > On 5/28/2024 10:48 AM, Sylvain Hubert wrote: > > ConTeXt LMTX version: 2024.05.27 18:16 > > > > Reproducible example: > > > > \definesectionlevels > > [default] > > [section, subsection, subsubsection, subsubsubsection, > subsubsubsubsection] > > > > \starttext > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \startsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stopsectionlevel > > \stoptext > > > > lua error > lua error on line 19 in file ./input.tex: > > > > registered function call [969]: > > ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: attempt > > to index a nil value (field '?') > > stack traceback: > > ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: > > in function > <...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:66> > > (...tail calls...) > can you test with the attached ... (remake the format) > > \starttext > \startsectionlevel[title=level 1] > \startsectionlevel[title=level 2 ] > \startsectionlevel[title=level 3] > \startsectionlevel[title=level 4] > \startsectionlevel[title=level 5] > \startsectionlevel[title=level 6] > \startsectionlevel[title=level 7] > \startsectionlevel[title=level 8] > \startsectionlevel[title=level 9] > \startsectionlevel[title=level 10 ] > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stopsectionlevel > \stoptext > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- >

1 0

wrong font scaling in LMTX?
by Pablo Rodriguez 28 May '24

28 May '24

Dear list, I have the following sample: \definefontfamily[mainface][rm][TeX Gyre Pagella] \definefontfamily[mainface][ss][TeX Gyre Heros] [scale=0.125] \setupbodyfont[mainface] \starttext \startTEXpage[pagestate=start, offset=1em] \rm a\ss a\\ {\rm a\ssd a}\\ {\rm a\ssx a}\\ {\rm a\ssxx a} \stopTEXpage \stoptext Scaled \ssx and \ssxx are wrong in LMTX (not scaled at all). All font sizes are scaled fine in MkIV. In both cases, I‘m running latest from 2024.05.17 16:32. Could anyone confirm the issue? BTW, this is the first time I indent the sample sent to the list with a single character (one tab) instead of two or four spaces. If the sample is wrong displayed in the medium you use with the mailing list, please tell me and I will go back to spaces instead of tabs. Many thanks for your help, Pablo

2 3

lua error in `strc-lev.lua`
by Sylvain Hubert 28 May '24

28 May '24

ConTeXt LMTX version: 2024.05.27 18:16 Reproducible example: \definesectionlevels [default] [section, subsection, subsubsection, subsubsubsection, subsubsubsubsection] \starttext \startsectionlevel \startsectionlevel \startsectionlevel \startsectionlevel \startsectionlevel \startsectionlevel \startsectionlevel \stopsectionlevel \stopsectionlevel \stopsectionlevel \stopsectionlevel \stopsectionlevel \stopsectionlevel \stopsectionlevel \stoptext lua error > lua error on line 19 in file ./input.tex: registered function call [969]: ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: attempt to index a nil value (field '?') stack traceback: ...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:75: in function <...mtx/tex/texmf-context/tex/context/base/mkiv/strc-lev.lua:66> (...tail calls...)

2 1

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 27 May '24

27 May '24

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-lmt.zip context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip general/manuals/ general/manuals/lowlevel-characters.pdf general/manuals/primitives.pdf general/qrcs/ general/qrcs/setup-mapping-en.pdf general/qrcs/setup-mapping-it.pdf sent 190,872 bytes received 45,199,940 bytes 3,631,264.96 bytes/sec total size is 582,177,943 speedup is 12.83 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2024-05-27.19 248173390 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-27.19/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-27.19/current 374922803 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-27.19 374922803 total

1 0

bug tracker
by Peter Münster 27 May '24

27 May '24

Hi, Is there a bug tracker for ConTeXt? (It seems, that https://tracker.luatex.org/ is no more used...) TIA for any hints, -- Peter

2 1

How to Define a New Language
by ai2472206007＠yeah.net 27 May '24

27 May '24

Hello, everyone. As the title describes, I want to define a new language: Chinese Traditional. Based on what I could find on the Internet, I made these settings. But I couldn't get the results I wanted. %%%start example \usetypescriptfile[osx] \setupbodyfont [stfangsong] \unprotect \installlanguage[cnt] [default=cn,patterns=cn,factor=yes] \setuplanguage [cnt] [spacing=packed,default=cn,patterns=cn,factor=yes] \setuplabeltext [cnt] [appendix={附錄}] \protect \mainlanguage[cnt] \currentmainlanguage \labeltext{appendix} %%% stopexample I think I'm going to get the two kanji [附錄]. But the truth is, he has nothing. But when I converted to Chinese Simplified, he magically appeared. %%%start example \usetypescriptfile[osx] \setupbodyfont [stfangsong] \unprotect \setuplabeltext [cn] [appendix={附錄}] %%% here switch to Chinese-Simplified \protect \currentmainlanguage \labeltext{appendix} %%% stopexample So, what should I do to get it. Of course, my original assumption was that when I changed the language, these labels, fonts, indentations, line spacing, etc., would change. But for now, I'm stuck at defining a new language. If anyone can give advice, appreciate it Muyik

3 7

page number
by Charles Doherty 26 May '24

26 May '24

Dear Wolfgang, I have a book in preparation with running heads. Pagenumber marking | marking Pagenumber The chapter title page has empty headings. The publisher would like the page number centered on the Chapter title page. I manage to put it there but I don’t want it to run on the following pages. I have made various attempts but can’t manage it. I have \setuplayout[location=doublesided] \setuppagenumbering[location=,alternative=doublesided] \setupheadertexts[chapter][][pagenumber] \setupheadertexts[{\getmarking[chapter]}][pagenumber] Can anyone show me code to achieve this? Thanks, Charlie

3 2

simplify side by side Poems
by seyal.zavira＠gmail.com 25 May '24

25 May '24

Hi all, i want to use tables for constructing poems structure this snippet of code works well: \startsetups tablepoem \setupTABLE[column][each][width=5cm] \stopsetups \starttext \bTABLE[setups=tablepoem] \bTR \bTD One one ons ksl \eTD \bTD two gfjgfd oski kwo \eTD \eTR \bTR \bTD One wer s dft tgf \eTD \bTD two gfkdsjg dfs we \eTD \eTR \eTABLE \stoptext but when i use this code for simplifying of changing cells I get an error: \startsetups tablepoem \setupTABLE[column][each][width=5cm] \stopsetups \def\Poemstart{\bTABLE[setups=tablepoem] \bTR \bTD} \def\Mesra{\eTD \bTD} \def\nextBeyt{\eTD\eTR\bTR\bTD} \def\Poemstop{\eTD\eTR\eTABLE} \starttext \Poemstart One one ons ksl \Mesra two gfjgfd oski kwo \nextBeyt One wer s dft tgf \Mesra two gfkdsjg dfs we \Poemstop \stoptext what is the problem?

2 4

Problem with PNG images in the latest standalone version
by Hajtmar Jaroslav 24 May '24

24 May '24

Hello. After a long time of using ConText from TeXlive installation I tried the standalone version again. I found that my old documents that I normally compile exclusively with the old ConText ver: 2018.04.04 00:51 MKIV beta fmt: 2019.5.2 latest version of standalone ConText compiles smoothly, seamlessly and most importantly very quickly and the results are the same at a glance. Unfortunately, the only problem I have not been able to solve is that the new standalone ConTeXt (ConTeXt ver: 2024.05.17 16:32 LMTX fmt: 2024.5.23) does not display PNG files in my PDF document for me. If I replace the PNG files with JPG files, the images are loaded and displayed in PDF file after compilation. I have also tried experimenting with the png method, see e.g. \setupexternalfigures[directory={../texlibrary/}, method=png], I have tried a few things, but it fails to work. I tried to search for something, but I couldn't find anything relevant. Can anyone advise me what the problem is or what I'm doing wrong? Is it caused by some version incompatibility or some setting? I apologize if something similar has already been addressed here, but I have not been able to follow the happenings in this mailing list for quite some time. Thanks a lot for any advice. Jaroslav

3 5

Suppress pagenumber
by Thomas Meyer 23 May '24

23 May '24

Need Help! I'm standing in front of the barn door ... How can I suppress the pagenumber only on the first page? Thanks in advance Thomas

2 1

Playing with math font setup
by Ali Ali 21 May '24

21 May '24

Hi, hope everyone's doing well! Is it possible to setup math font so that all the basic ascii characters (i.e. a..zA..Z0..9) glyphs are substituted with current serif (or sans) font. I tried playing with fallback thing but it didn't got me anywhere! e.g. $x$ will use the 'x' glyph from current serif italic font, and $\bf x$ will use the 'x' glyph from current serif bold font! I would appreciate any suggestions and help! Suppose we have all the required font files in the 'font' directory of the working directory, and below is the minimal source code! """ \starttypescriptcollection[CustomFontSelection] \starttypescript [serif] [CustomFontSelection] [name] \setups[font:fallback:serif] \definefontsynonym [Serif] % [file:font/Lora-Regular.ttf] [file:font/Lora-Medium.ttf] [features=default,fallbacks=Serif] \definefontsynonym [SerifBold] [file:font/Lora-Bold.ttf] [features=default,fallbacks=SerifBold] \definefontsynonym [SerifItalic] % [file:font/Lora-Italic.ttf] [file:font/Lora-MediumItalic.ttf] [features=default,fallbacks=SerifItalic] \definefontsynonym [SerifBoldItalic] [file:font/Lora-BoldItalic.ttf] [features=default,fallbacks=SerifBoldItalic] \stoptypescript \starttypescript [math] [CustomFontSelection] [name] %%% \definefontfallback [MathRomanFallBack] %%% [SansItalic] %%% [extendedlatin] %%% [force=yes] \definefontsynonym [MathRoman] [file:font/STIXTwoMath-Regular.otf] [features=math,fallbacks=MathRomanFallBack] \stoptypescript \starttypescript[CustomFontSelection] \definetypeface [CustomFontSelection] [rm] [serif] [CustomFontSelection] [default] [rscale=0.9] \definetypeface [CustomFontSelection] [ss] [sans] [newcomputermodern-book] [default] \definetypeface [CustomFontSelection] [tt] [mono] [newcomputermodern-book] [default] \definetypeface [CustomFontSelection] [mm] [math] [CustomFontSelection] [default] [rscale=0.97] \stoptypescript \stoptypescriptcollection \setupbodyfont[CustomFontSelection] \starttext We use $X$, $Y$, $Z$ and $n$, $m$, etc. $\sin(x) \to \limsup x_n$ whatever. \mathematics{% \delta_{ij} = \startmathcases \NC 1 \NC \text{if } i = j \NR \NC 0 \NC \text{otherwise} \NR \stopmathcases } We use $\bf X$, $\bf Y$, $\bf Z$ and $\bf n$, $\bf m$, etc. $\bf \sin(x) \gets \limsup x_n$ whatever. \stoptext """ Best regards, Ali

2 1

LUA API for page numbers
by Luc Chabassier 21 May '24

21 May '24

Hi everyone, I have recently migrated my PhD dissertation from LaTeX to ConTeXt. In LaTeX I was using kaobook, a template with lots of margin notes, but I was frustrated with the automatic placement of the notes. I implemented a system using overlays that automatically places the notes using lua. To know where the ideal placement should be (if they do not interact with each other), I use lua to insert a latelua whatsit that uses lpdf.getpos() to get the coordinate on the rendered page. However, I haven't found a way to get the page number using lua, and the tex macro \pagenumber is unreliable near pagebreaks. Furthermore, it would be helpful to know if there is a way to access the position and sizes of figures at the end. Thanks, Luc

4 7

defining hashtag simulator
by seyal.zavira＠gmail.com 20 May '24

20 May '24

Hi all, I want to define a command that simulate hashtag behavior in social networks, In other words, this command should put the hashtag sign at the beginning of it, replace spaces with dashes and also it should be a clickable link and unbreakable world. I mean like this, for example: \myhashtag{hello world} It should be displayed as #hello_world in the final PDF and when clicked it will search for #hello_world throughout the pdf How is this possible?

3 4

luatex doesn't see installed 3rd party module
by andrei＠borisov.dev 20 May '24

20 May '24

Hello! I’ve installed a 3rd party module by copying its TDS folder structure and invoking `context --generate` as described in https://wiki.contextgarden.net/Modules#ConTeXt_LMTX When I compile my project with `context` (using LuaMetaTeX), it's found and works just fine; however, when I try to compile with LuaTeX by invoking `context --latex`, it can’t find the module. Do I need to do something special to make it visible for LuaTeX? I can’t find the answer in the wiki. Any help would be appreciated 🙏🏻 Best, Andrei.

2 3

Special charakter
by Thomas Meyer 20 May '24

20 May '24

Hi folks, I have problems to produce the polish l. \l gives ł, but \L gives nothing! How can I write Łódź (on a Mac)? Thanks and nice weekend. Thomas

7 11

luatex doesn't see installed 3rd party module
by andrei＠borisov.dev 20 May '24

20 May '24

Hello! I’ve installed a 3rd party module by copying its TDS folder structure and invoking `context --generate` as described in https://wiki.contextgarden.net/Modules#ConTeXt_LMTX When I compile my project with `context` (using LuaMetaTeX), it's found and works just fine; however, when I try to compile with LuaTeX by invoking `context --luatex`, it can’t find the module. Do I need to do something special to make it visible for LuaTeX? I can’t find the answer in the wiki. I use standalone ConTeXt distribution. Any help would be appreciated 🙏🏻 Best, Andrei.

2 1

How to disable hyphenation at the end of a line?
by Joel 20 May '24

20 May '24

I'm using mostly default ConTeXt settings, but an editor has warned I should avoid using hyphenation at the end of lines--at least for my particular audience. I've found manual text that says how to disable specific words from being hyphenated. Is there a whole-document switch to disable it? --Joel

3 2

build_parshape and \getshapetext - need for a deeper understanding
by garulfo＠azules.eu 19 May '24

19 May '24

I still get some difficulties with build_parshape, \getshapetex and sectionning. I though I find a solution by removing \blank with \setuphead [subsection] [before=, after=, style=, command=\MySubSectionCommand, alternative=text ] But actually it's not enough : when I add text before the first section, new issues appear. I tried to build a MVE by refactoring and tidying as much as I could. It build 3 comparative pages (i) basic issue, (ii) solution, (iii) remaining issue. Your guidance are most welcome :-) \setupbodyfont[11pt] %------------------------------------------------------------------------------ \usecolors[svg] \definemeasure [mywidth] [7cm] \definemeasure [mywidtha] [5cm] \definemeasure [myheight] [{\the\dimexpr\baselineskip*37+\lineskip\relax}] \definemeasure [myheighta] [{\the\dimexpr\baselineskip*18+\lineskip*1\relax}] \definemeasure [myheightb] [{\the\dimexpr\baselineskip*25-\lineskip*1\relax}] \startuseMPgraphic{mymetafunpath} path p ; numeric mywidth ; mywidth := \measure{mywidth}; numeric mywidtha ; mywidtha := \measure{mywidtha}; numeric myheight ; myheight := \measure{myheight}; numeric myheighta ; myheighta := \measure{myheighta}; numeric myheightb ; myheightb := \measure{myheightb}; p := (0,0) -- (mywidth,0) -- (mywidth,myheighta) -- (mywidtha,myheighta) -- (mywidtha,myheightb) -- (mywidth,myheightb) -- (mywidth,myheight) -- (0cm,myheight) -- cycle; build_parshape(p,0,0,0,\baselinedistance,\strutheight,\strutdepth,\topskip) ; fill p withcolor \MPcolor{tan}; \stopuseMPgraphic \defineoverlay[myoverlay][\useMPgraphic{mymetafunpath}] %------------------------------------------------------------------------------ \define[2]\MySubSectionCommand{\leftaligned{#2}} %------------------------------------------------------------------------------ \define[2]\MyPageBuilder{% \page \setupbackgrounds[page][background=testA] \definelayer[testA] [x=0mm, y=0mm,width=\paperwidth, height=\paperheight] ~ \startshapetext[mymetafunpath, mymetafunpath] % <=== WITHOUT \startsubsection #2 %\startsubsection[title={Title for section #1}] \MySubSectionCommand{1}{Title for section #1} \input knuth \endgraf \input ward %\stopsubsection \stopshapetext \setlayer [testA] [hoffset={\the\dimexpr\backspace\relax}, voffset={\the\dimexpr\topspace+\headerheight+\headerdistance\relax},] {\framed[background=myoverlay,frame=off]{\strut\getshapetext}} \startshapetext[mymetafunpath, mymetafunpath] % <===== WITH \startsubsection #2 \startsubsection[title={Title for section #1}] %\MySubSectionCommand{1}{Title for section #1} \input knuth \endgraf \input ward \stopsubsection \stopshapetext \setlayer [testA] [hoffset={\the\dimexpr\backspace+\measure{mywidth}+5mm\relax}, voffset={\the\dimexpr\topspace+\headerheight+\headerdistance\relax},] {\framed[background=myoverlay,frame=off]{\strut\getshapetext}} } %============================================================================== %\showboxes \starttext \MyPageBuilder{A}{} \setuphead [subsection] [ before=, after=, style=, command=\MySubSectionCommand, alternative=text, ] \MyPageBuilder{B}{} \MyPageBuilder{C}{\strut Hi from here. \endgraf} \stoptext

2 1

Wiki - test/proposal to further clarify documentation
by garulfo＠azules.eu 19 May '24

19 May '24

Hi all, I just discover the Diátaxis documentation framework : - https://www.diataxis.fr/ - 30min video : "What nobody tells you about documentation", https://www.youtube.com/watch?v=t4vKPhjcMZg , from Daniele Procida at PyCon 2017 As I understand it, it can help both readers and writers of the documentation by clarifying the purpose of each element. So I started a potential new "welcome page" : https://wiki.contextgarden.net/Main_Page2 The main lines would be : - Tutorials: installation pages, step by step examples - How-to guides: most of the existing wiki pages which are not https://wiki.contextgarden.net/Commands/ ... - Discussions and manuals: most of the existing manuals - Reference : the pages dedicated to commands which already include link to mailing list, stack exchange, ConTeXt's source - https://wiki.contextgarden.net/Category:Commands - https://wiki.contextgarden.net/Special:PrefixIndex?prefix=Command%2F To match the logic of Diátaxis, maybe some material from command pages should be moved from "Reference" to "How-to guides", for example, when the examples go beyond "pure description" and begin to deal with "how-to" cases, e.g. : - Reference for setuphead: https://wiki.contextgarden.net/Command/setuphead - How-to guides for headings: https://wiki.contextgarden.net/Titles If it make sense, and according to your feedbacks, I can continue to reallocate existing contents. Thanks for your feedback and thoughts. Garulfo

9 17

MyWay from dl.contextgarden.net
by garulfo＠azules.eu 19 May '24

19 May '24

Several documents previously stored on dl.contextgarden.net are no longer accessible. https://wiki.contextgarden.net/This_Way_-_My_Way#MyWay Are they available on another server ? or is there a copy somewhere else ? Thanks for your help Garulfo

2 2

Why is only the first frame protruding into the margin?
by madiazm.eoicc＠gmail.com 18 May '24

18 May '24

Hi, I used some code from the meta-fun manual to recreate a labelled frame around my sections. But the first framedtext protrudes a couple of mm into the margin. Only the first one in the page. I intentionaly added other sections and the frames aline to the margin ok. I tried to put something before the first frame (noindentation, dontleavehmode) because I sometimes read it solves problems, but not the case here. so Why is the first frame protruding and only the first? \definepapersize[vertical][A4, portrait] \definepapersize[horizontal][A4, landscape] \setuppapersize[vertical] \setuplayout[location=middle, marking=off, topspace=1cm, topdistance=0cm, backspace=2.5cm, height=fit, width=fit, rightedge=5mm, rightedgedistance=0cm, rightmargin=20mm, rightmargindistance=7mm, leftmargin=1.5cm, header=1cm, headerdistance=.5cm, bottomspace=.5cm, bottomdistance=0mm, footer=.8cm, footerdistance=.2cm, setup=strict,] \startuseMPgraphic{FunnyFrame} picture p ; numeric w, h, o ; p := textext.rt(\MPstring{FunnyFrame}) ; w := OverlayWidth ; h := OverlayHeight ; o := BodyFontSize ; p := p shifted (2o,h-ypart center p) ; draw p ; drawoptions (withpen pencircle scaled .25pt withcolor blue) ; draw (2o,h)--(0,h)--(0,0)--(w,0)--(w,h)--(xpart urcorner p,h) ; %draw boundingbox p ; %%%quitamos el frame pequeño setbounds currentpicture to unitsquare xyscaled(w,h) ; \stopuseMPgraphic \defineoverlay[FunnyFrame][\useMPgraphic{FunnyFrame}] \defineframedtext[FunnyText][width=.85\textwidth, height=20mm, frame=off, background=FunnyFrame, align=flushright,location=right, after={\blank[2*big]}]%foregroundsytel amplía la palabra Apartado \def\FrameTitle#1% {\setMPtext{FunnyFrame}{\hbox spread 1em{\hss\strut \color[blue]{\tfx Apartado #1}\hss}}} \setMPtext{FunnyFrame}{} % initialize the text variable \define[2]\firstHeadings{% \dontleavehmode \switchtobodyfont[miCorm] \FrameTitle#1% \dontleavehmode \startFunnyText {\switchtobodyfont[miCorm,20.7pt] #2} \stopFunnyText } \setuphead [section] [color=blue, command=\firstHeadings, indentnext=no] \starttext \noindentation \dontleavehmode \startsection[title=Aspectos generales] Esta guía contiene toda la documentación necesaria para administrar la prueba unificada de certificación que ha diseñado la comisión de alemán. Se ruega al profesorado\footnote{Todas las alusiones a la forma del masculino genérico que se recogen en este documento deberán entenderse referidas a la condición masculina o femenina de cada persona según corresponda.} que se familiarice con las secciones del documento a través del índice y acuda a ellas según vaya siendo necesario, de manera que se pueda administrar y corregir la prueba de la manera más satisfactoria posible. \stopsection \startsection[title=another section] Las carpetas con las pruebas aparecen nombradas por idioma, nivel y set de pruebas, no apareciendo ninguna referencia a convocatorias anuales ni tampoco fechas. Sí aparece la referencia a la convocatoria en cada una de las guías de administración para los diferentes niveles. \stopsection \startsection[title=another section] La carpeta correspondiente a cada nivel contiene las distintas actividades de lengua, los audios para CTO y el audio/vídeo base para la mediación escrita. Además contiene esta guía con la información necesaria para tener una visión global de la prueba: los solucionarios, transcripciones, tablas de corrección, tablas de conversión y la rúbrica para la mediación escrita. Igualmente se incorporarán o enlazarán subcarpetas con los archivos necesarios para las pruebas orales: monólogos, diálogos y mediaciones orales. \stopsection \stoptext

5 12

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 17 May '24

17 May '24

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-lmt.zip context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip general/manuals/ general/manuals/pdfmerge.pdf general/qrcs/ general/qrcs/setup-mapping-en.pdf general/qrcs/setup-mapping-it.pdf sent 185,981 bytes received 43,500,122 bytes 2,647,642.61 bytes/sec total size is 581,971,883 speedup is 13.32 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2024-05-17.17 248030043 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-17.17/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-17.17/current 374779456 /var/www/aanhet.net/context//htdocs/archives/context-2024-05-17.17 374779456 total

1 0

update
by Hans Hagen 17 May '24

17 May '24

Hi, This weekends update: - we're currently checking the upcoming math manual and in the process we streamline some mechanisms - as part of the BT presentation about par passes we introduced \toddlerpenalty but we leave it to the user to guess what that is (it fits into widow, club and orphan penalty collection) - we could already produce pdf 2.0 but especially when one mises with older files, some care is needed; the inclusion 'compact' mechanism has been cleaned up a bit and the merge interface is converging (it has to do with efficient font sharing, cleanup and fixing of files outside our control); when one has issues with inclusion, try with compact= (set to nothing) - although we're mostly done with tagging it will get some attention as we go; it's mostly about playing safe and getting valid pdf's - for rhaban (posters) another fancy feature was added: \startTEXpage[offset=1ts] \samplefile{tufte}\removeunwantedspaces\space \startshadow[contrastcolor=red,weight=100]\blue\samplefile{tufte}\removeunwantedspaces\stopshadow\space \samplefile{tufte}\removeunwantedspaces\space \startshadow[contrastcolor=red,weight=100,dx=0,dy=0]\blue\samplefile{tufte}\removeunwantedspaces\stopshadow\space \samplefile{tufte} \blank \setupshadows[shadowed][unit=pt,dx=.5,dy=-.5,weight=200] \shadowed{\bfd Tufte\setstrut\strut} \stopTEXpage Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0