- ntg-context - Mailing Lists

new beta
by Hans Hagen 02 Dec '02

02 Dec '02

Hi, I uploaded a new beta. Most changes / updates / new features will go unnoticed until documented (column sets, more float placements and control, more clever and efficient text backgrounds -also in tables, and floats); since i use these features in some styles, they finally will be documented -) Of course there are also some fixes. Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

2 3

epigraph
by Simon Pepping 29 Nov '02

29 Nov '02

I am trying to find out how to format a so-called epigraph, a motto at the start of an article or section. I have made this construct: \tabskip=0pt plus 1fill \halign to\hsize{#\hfil\tabskip=0pt\cr ``The sky is blue''\cr ``The sky is very blue''\cr \noalign{\vskip 6pt} \hfill {Simon Pepping}\cr } It is very plain TeX. Is there a higher level Context construct that would be appropriate here? Regards, Simon -- Simon Pepping email: spepping(a)scaprea.hobby.nl

4 7

Automating a letter module style
by Nigel King 29 Nov '02

29 Nov '02

I have been using a letter format and gradually improving the macro format and style each time I use it. It makes a lot of use of backgrounds to set elements on the page. I would like to improve some other elements. The target structure of a letter source would be as follows. \usemodule[lett-01] \setupletter [address=...\\...\\.., signature=Nigel King, thedate=\currentdate, ......] \starttext \opening Further to your ...... %main letter content \closing[Yours ...,] \encl[...] \cc[...] \ps[...] \stoptext A lot of this works quite well using the following typical "macros" in u-lett-01.tex typical parts of which are shown below ---------- \unprotect \def\setupletter{% \dosingleargument\dosetupletter} \def\dosetupletter[#1]{% \getparameters[letter@][#1]} Some other \defs.... \def\opening{ \definelayer [letter@layer@toaddress] \setlayer [letter@layer@toaddress] [x=\backspace,y=50mm] {\framed [height=37.6mm, width=89mm, frame=on, align={right,lohi}, strut=no, offset=overlay] {\getvalue{letter@toaddress}}} \setupbackgrounds [page] [background={letter@layer@toaddress}] }% end of opening \protect ----------- The main problems that I have follow; 1. \usemodule[lett-01] has to be \input u-lett-01 because the definitions are not recognized properly otherwise. "no macros found", I have not found any documentation on macros. I had a look at m-chart.tex but it was too long and complicated to get the simple idea from. Is there another 2. I cannot find a way of defining elements which are effectively in the running text like \openingline=Dear ..., in the setupletter because \getvalue{letter@opening} seems not to pick up the value. A similar problem occurs with closing which has a number of formatting constraints which deosn't want to be seen in the letter source. The only way I have been able to achieve the objective has been to use the following type of construct. In the source letter \signature[Nigel King] In the module \def\signature[#1]{\def\fromsig{#1}} \def\closing[#1]{\par\framed[width=\textwidth,frame=off]{\rbox{ \blank[2*big] #1 \blank[6*big] \fromsig\par}}} Any help would be much appreciated. -- Nigel

5 13

DTD for education
by Gour 29 Nov '02

29 Nov '02

In the ConTeXt documentation on the web site, I've seen that there is a work in progrees for some DTDs for educational use. I'm interested if there is already something available sicne soon I'll have to start working on some courses and would be glad to take a look at something in regards? Sincerely, Gour -- Gour gour(a)mail.inet.hr Registered Linux User #278493

1 0

Convert Context to HTML
by viktorvarheit＠gmx.de 27 Nov '02

27 Nov '02

The manual "XML in ConTeXt" (example.pdf) says: When you want to convert TEX documents into xml (or html) counterparts, it makes sense to use TEX itself, because that way we have the full engine at our fingertips. In ConTEXt we use a strange but charming way to handle this conversion: we simply typeset xml. The typeset document (with lots of angle brackets) is then converted into raw text. A complication is math, but given that you can embed MathML in your document, this can be passed on directly. How can this be done?

1 0

updates to Help Page
by Bill McClain 25 Nov '02

25 Nov '02

I recently finished a large project and have added new material to my ConTeXt Help Page at http://home.salamander.com/~wmcclain/context-help.html. * Marginal notes. See a sample double-page spread at http://home.salamander.com/~wmcclain/csky-sample.pdf * X-Y positioning of graphics with layers and overlays. Sample jpeg version of a page at: http://home.salamander.com/~wmcclain/csky-cover-large.jpg * Using \definestartstop. Example for blockquotes. * Table of contents with different sections. * Dropped caps. * Little things: \index placement, passing variables on the command line, using line numbering. * How to install the FontSite-500 CD font collection for ConTeXt, with an archive of scripts and sample files. * * * I just uploaded all this; please let me know if you see any errors. -Bill -- Sattre Press Tales of War http://sattre-press.com/ by Lord Dunsany info(a)sattre-press.com http://tow.sattre-press.com/

4 10

Re: [NTG-context] setupinteraction breaks moving from 2001.11.13 to 2002.1.28
by Hans Hagen 25 Nov '02

25 Nov '02

At 11:37 AM 11/25/2002 -0500, you wrote: >Interactions in a simple document that work under ConTeXt version >2001.11.13 break under 2002.1.28. The simple document and logs for >both ConTeXt versions ("old" and "new") are attached - note the >entry "check : missing '=' after '\let...'" in "new". > >Any suggestions about how to fix this would be most appreciated. see previous mail, use \startinteractionmenu .... (see s-pre-* files) Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

2 1

setupinteraction breaks moving from 2001.11.13 to 2002.1.28
by Daniel Graham 25 Nov '02

25 Nov '02

Interactions in a simple document that work under ConTeXt version 2001.11.13 break under 2002.1.28. The simple document and logs for both ConTeXt versions ("old" and "new") are attached - note the entry "check : missing '=' after '\let...'" in "new". Any suggestions about how to fix this would be most appreciated. -Dan

1 0

additional structures, DocBook, etc.
by Bruce D'Arcus 25 Nov '02

25 Nov '02

Another issue that's periodically come up, and would seem all the more relevant with the DocBook project (which will hopefully be incorporated into ConTeXt itself at some point): There are a number of structures that, AFAIK, do not yet exist in ConTeXt, but should. Ones that are a) in DocBook, b) broadly useful, and c) useful to me :-): subtitle author abstract (and other such meta info) epigraph Any plans to add these? It'd certainly make customizing DocBook output, ConTeXt stuff itself, easier as well as... And here's a wild thought (though I don't know if a good one): Why not link the meta info stuff to the forthcoming new bib system? I have a new article I'm working on in ConTeXt: I enter it in the bib database complete with abstract and a status of draft, and the meta information gets imported into the document. Bruce

1 0

more on block quotes
by Bruce D'Arcus 25 Nov '02

25 Nov '02

This came up a few weeks back, but I quickly lost the conversation. Shouldn't the quotation environment work as it does in LaTeX? If one has a \startquotation after a paragraph break (white space, or \par) and a break after the \stopquotation, then the following paragraph should understood to be new, and hence requiring a first line indent. If, however, there are no breaks, then the quote is understood to be a part of the larger paragraph on either side of it, and hence the text after block quote is not indented. (And might this be default behavior? Relevant, say, if typesetting a DocBook doc with its blockquote element.) Seems to me this is easier and more elegant than specifying some option every time one wants to use the command... Bruce

1 0

Re: [NTG-context] setupinteraction breaks moving from 2001.11.13 to 2002.1.28
by Hans Hagen 25 Nov '02

25 Nov '02

At 07:38 AM 11/25/2002 -0500, you wrote: >Interactions in a simple document that work under ConTeXt version >2001.11.13 break under 2002.1.28. The simple document and logs for >both ConTeXt versions ("old" and "new") are attached - note the >entry "check : missing '=' after '\let...'" in "new". > >Any suggestions about how to fix this would be most appreciated. the new (more flexible and robust) syntax is: \startinteractionmenu[bottom 1] \but [LastPage] \labeltext{help} \\ \hfill \but [SubmitForm{http://localhost.localdomain/cgi-bin/record}] ... \\ \stopinteractionmenu .... \defineinteractionmenu [bottom 1] [bottom] [state=stop] \setupinteractionmenu [bottom, bottom 1] no need for the bottom 1 in the setup..., since by default it inherits from bottom Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

1 0

setupinteraction breaks moving from 2001.11.13 to 2002.1.28
by Daniel Graham 25 Nov '02

25 Nov '02

Interactions in a simple document that work under ConTeXt version 2001.11.13 break under 2002.1.28. The simple document and logs for both ConTeXt versions ("old" and "new") are attached - note the entry "check : missing '=' after '\let...'" in "new". Any suggestions about how to fix this would be most appreciated. -Dan -- Daniel A. Graham 238 Social Sciences TEL: (919) 660-1802 Department of Economics FAX: (919) 684-8974 Duke University daniel.graham(a)duke.edu Durham, NC 27708-0097

1 0

Aligning things within tables
by drymartini＠gmx.de 22 Nov '02

22 Nov '02

I am trying to typeset tables using natural tables and XML. In the head of the table I want the text typeset flush left, but in the table itself I want the figures aligned on the commas. Can this be done? I see I can set the alignment for each column, but can I have different alignments for each row? -- WE ARE NOT TALKING ABOUT STELLA ARTOIS HERE.. This is a chemical wheapon against the working class ....

2 1

tbook?
by Bruce D'Arcus 21 Nov '02

21 Nov '02

Just wondering if anyone has taken a look at tbook. http://tbookdtd.sourceforge.net/ It's a DTD, along with a collection of XSLT files and shell scripts designed for output to LaTeX, DocBook, and XHTML (complete with support for MathML, as well as xindy). My thought is that it might be an interesting XML authoring tool in conjunction for ConTeXt, though the current LaTeX XSLT files would have to be tweaked obviously. Don't know how much work is involved in that, but at some point I'll take a look. Something like this would be all the more useful, I assume, once we see m-bib v2 (sometime soon Taco?)... Bruce

1 0

vanishing leftarrow
by Hans van der Meer 20 Nov '02

20 Nov '02

I did encounter something strange with leftarrow in metapost math: In normal text: All three arrows appear with $l\leftarrow r\rightarrow lr\leftrightarrow$. In metapost: The leftarrow does not appear, the others do in: \placefigure{}{\startMPgraphic u = 180mm; v = 40mm; label.bot(textext("$l\leftarrow r\rightarrow lr\leftrightarrow$"),(u/2,v)); \stopMPgraphic\loadcurrentMPgraphic{}\placeMPgraphic} How is that possible and how can it be repaired? Hans van der Meer

2 1

suppressing external graphics
by Bill McClain 19 Nov '02

19 Nov '02

I have a book-length document with many hi-res graphics. I would like to omit those graphics in order to make a smaller file to submit to some proof-readers. I have tried both: "\setupexternalfigures[option=empty]" and "texexex --fast". Both give the same result: the graphics are replaced by black rectangles, but the size of the pdf file is the same as the original version which included the graphics. (Very large). Oddly enough, the pdfimages utility will not extract any images from the "black rectangles" version, leading me to think the graphics are not really in the pdf file, but I don't know what would be taking up the same amount of space. Using: ConTeXt ver: 2002.7.26 pdfeTeX, Version 3.14159-1.00a-pretest-20011114-ojmw-2.1 -Bill -- Sattre Press Pagan Papers http://sattre-press.com/ by Kenneth Grahame info(a)sattre-press.com http://pp.sattre-press.com/

3 3

Minipages
by drymartini＠gmx.de 18 Nov '02

18 Nov '02

Hi there, is there something similar to the LaTeX minipage environment? I have a box which contains text, tables and footnotes, and the whole thing is supposed to become a float with a frame and/or a colour background. Can I just use a block or is there a more sophisticated mechanism? Can a float be inside another float? At present my tables are floats within the text but I can rework this if necessary. -- /Users/robbie 153% ping real-life ping: unknown host real-life

1 0

A Semetic Aporia
by Idris S Hamid 18 Nov '02

18 Nov '02

Dear Hans, I have a serious problem: In Classical Arabic numerals are pronounced from single digits to tens to hundreds, etc., e.g. 1234== four, thirty, two hundred, and a thousand. This makes transcribing Arabic numerals easy: they run the same as in roman languages. So in my otp's (Omega-Gamma) there is a command to transcribe any left-to-right L-R string numeral into an L-R string in Arabic (so I don't have to type the numeral backwards in the L-R transcription; i.e., typing 1234 in L-R comes out the same in R-L). But there is a complicated scenario: For purposes of sectioning, we get (as in a TOC) for e.g. Section 3.12 in roman it should be (L-R): 3.12-------------------------------------------<page no.> in Arabic it should be (R-L): <page no.>-------------------------------------------12.3 Now my Gamma configuration is such that everything is flipped R-L except for numerals, so I _actually_ get <page no.>-------------------------------------------3.12 in my Arabic sections and TOC. Is there any way to reverse the order of subsections so that subsection 3.12 comes out as 12.3? I assume there is some code that commands ConTeXt to print the section number, followed by the subsection number. Can that be hacked to reverse the sequence for Semetic documents (Arabic and Hebrew)? So we could have an option say, [style=semetic]. I did something similar in EDMAC once for Arabic critical editions. I am finishing up a treatise in Arabic to be submitted later this week so I'm desparate. I guess I could replace all the numerals using the manual mechanism but there must be a better way! Best wishes Idris -- Dr. Idris S Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

2 3

PDF zoom
by Zeljko Vrba 18 Nov '02

18 Nov '02

I have bookmarks and cross-references in my document. When clicking to any of them, the acrobat reader moves me to the right place. However, it changes current zoom to fit to page. How do I make it retain the zoom I manually set up myself?

4 7

where has PI gone?
by Hans van der Meer 18 Nov '02

18 Nov '02

Since the last ConTeXt beta the typesetting of the greek capital letter PI doesn't work anymore in lucida (lbr). Small pi works though. Anyone knows why? And where to find it back? Hans van der Meer

2 6

Re: Re: [NTG context] Swedish Keyboard
by Stefan Karlsson 17 Nov '02

17 Nov '02

Thanks Jens, \enableregime[il1] did the trick!

1 0

itemize headstyle SC?
by Bruce D'Arcus 17 Nov '02

17 Nov '02

I want an itemized list set in smallcaps. Shouldn't this work? \startitemize[n][headstyle=cap] with a \setupcapitals[sc=yes,title=yes] in the module I'm using? I've run into this problem before with section headings, and not figured it out... Also, what command do I use to invoke a character encoding regime? \usemodule doesn't seem to work... Bruce

3 3

subdivision prefix/suffix
by Idris S Hamid 16 Nov '02

16 Nov '02

2 problems: 1) I'm trying to get \subsubsection to add a suffix (namely a colon) to every argument, viz. \subsubsection{Note} ===> Note: I tried \setuphead [subsubsection][style=bold, number=no, before={\blank[small]}, after={\blank[disable]}, prefix=-:] which results in ------------------------------- ! Undefined control sequence. <argument> \localkopprefix \setupreferenceprefix [#1]->\edef \@@rfprefix {#1 }\ifx \@@rfprefix \empty \l... \dodododosomekop ...renceprefix [\localkopprefix ] \fi \dosomebreak \nobreak ... l.46 \subsubsection{tanbIh"} ---------------------------------- Am I using "prefix" wrong? Is there another way I'm supposed to do this? 2) I would like to not only disable the space after \subsubsection but also have the main text start immediately after the argument, viz. \subsubsection{Note} Here is some text ===>> Note: Here is some text Is this possible?? Best wishes Idris -- Dr. Idris S Hamid Department of Philosophy Colorado State University Fort Collins, CO 80523

3 2

Swedish Keyboard
by Stefan Karlsson 16 Nov '02

16 Nov '02

Hi, I am a Swedish user of ConTeXt. I am pretty new to the system and have the following problem: The Swedish language contains a few extra letters compared to English, all of which are supported by the Swedish keyboard. How do I set up ConTeXt (or am i looking in the wrong place) so that I can use the keys for å ä ö instead of having to type \aa \"a \"o? All help is appreciated :-) /Stefan Karlsson

2 1

\cap{} doesn't work on \"o and \aa
by Stefan Karlsson 16 Nov '02

16 Nov '02

Hi all, I cant get \cap{} to work on letters like \"o and \aa. For example, \cap{sn\"o} results in the following message: "! Missing number, treated as zero". Have I missed something? Regards, Stefan Karlsson

1 0