- ntg-context - Mailing Lists

(no subject)
by Coydell Rivers 17 Mar '03

17 Mar '03

Someone please give me a heads up....on the below \definieerpapierformaat [CONTEXT] [hoogte=27cm, breedte=36cm] \stelpapierformaatin [CONTEXT] [CONTEXT] This gives a document size of ( 14.17 x 6.3 in ) The 6.3in is the problem, it is not a full page If you are able to get a full page, please send me the test code... Thanks

3 5

new version, new manuals, new files
by Hans Hagen 17 Mar '03

17 Mar '03

Hi, I uploaded a new version (stable and beta are now the same). This version inclused a few patches/extensions discussed recently. There is quite some new support for side floats, column sets have become rather stable (a manual will follow soon). Although a lot of functionality is still 'my little secret' to be revealed when users request it, you can ready find some info in www.pragma-ade.com/general/manuals.details.pdf so, this manual has now moved from temp. It has currently some 80+ pages, and will probably tripple in size over time. This manual provides you some info about how to apply the relatively new layer and related things. The idea is that this kind of detailed trickery and/or thinsg not related to structuring will be discussed in details.pdf, while the structuring ends up in the ref manual (i'll pick up that thread soon). I also updated www.pragma-ade.com/show-fil.pdf (made nicer, watch the new image archive), www.pragma-ade.com/show-man.pdf (more manuals, not all yet on the site but i need the file here and it gives you an idea of what is coming), www.pragma-ade.com/showcase.pdf Next in my list of manuals is finishing the correspondence manual (letters and envelops and alike), the pstopdf manual, and a few more. Happy reading and contexing, Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

8 34

ConTeXt beta installation issue
by Bruce D'Arcus 17 Mar '03

17 Mar '03

I've been using Simon's installer script successfully of late to install betas, but just ran into the following error (see below). Any ideas or suggestions? The command I used was: sudo perl install_context.pl --textree /Users/darcusb/Library/texmf /Applications/Installers/ConTeXt/cont-tmf.zip I do note that the pdfetex.pool it says it can't open is in this directory: /usr/local/teTeX/share/texmf/web2c/ Bruce ======================== Making formats for languages en nl TeXExec 3.2 - ConTeXt / PRAGMA ADE 1997-2003 running `pdfetex -ini -jobname=cont-en -progname=context *cont-en.ini' ... ! I can't read pdfetex.pool; bad path? Error: `pdfetex -ini -jobname=cont-en -progname=context *cont-en.ini' failed ######################################################################## ####### fmtutil: Error! Not all formats have been built successfully. Visit the log files in directory /usr/local/teTeX/share/texmf.local/web2c for details. ######################################################################## ####### This is a summary of all `failed' messages and warnings: `pdfetex -ini -jobname=cont-en -progname=context *cont-en.ini' failed ! I can't read pdfetex.pool; bad path? running `pdfetex -ini -jobname=cont-nl -progname=context *cont-nl.ini' ... ! I can't read pdfetex.pool; bad path? Error: `pdfetex -ini -jobname=cont-nl -progname=context *cont-nl.ini' failed ######################################################################## ####### fmtutil: Error! Not all formats have been built successfully. Visit the log files in directory /usr/local/teTeX/share/texmf.local/web2c for details. ######################################################################## ####### This is a summary of all `failed' messages and warnings: `pdfetex -ini -jobname=cont-nl -progname=context *cont-nl.ini' failed ! I can't read pdfetex.pool; bad path? TeX binary : pdfetex format(s) : en nl total run time : 8 seconds Failure executing texexec --make en nl

1 1

fake columns -- ignore the last message
by Matthew Huggett 16 Mar '03

16 Mar '03

Sorry, The fake columns example works fine now. It appears I hadn't copied the example as exactly as I thought I had. Matt

1 0

fake columns
by Matthew Huggett 16 Mar '03

16 Mar '03

Hi: I'm playing with fake columns as described on page 9 of details.pdf . I've copied the example exactly, but the text doesn't show up. \showgrid lets me see the columns, but the text that I want set in the columns is not there. Any ideas? Thanks Matt

1 0

Font and index trouble (was Re: mathpple-a-like for ConTeXt?)
by Magnus Lie Hetland 15 Mar '03

15 Mar '03

Hans Hagen <pragma(a)wxs.nl>: > > At 11:56 PM 2/20/2003 +0100, Magnus Lie Hetland wrote: > > >I guess I'm just too green with ConTeXt, but I can't get this to > >work... Must i call \usetypescriptfile[somethingorother] first? > >(Actually, I get "undefined control sequence"...) > > What version do you run? Well, texexec --version returns 1.9. I'm using the version that comes with Gentoo Linux. I may well be missing something basic here -- I simply slapped your \usetypescript commands at the beginning of my ConTeXt file (before \starttext), and I get the following error messages: ! Undefined control sequence. <recently read> \usetypescript l.1 \usetypescript [berry][ec] ! Undefined control sequence. l.2 \usetypescript [palatino][ec] bodyfont : unknown variant palatino The commands were: \usetypescript[berry][ec] \usetypescript[palatino][ec] \setupbodyfont[palatino] Another thing that surprised me (not font-related) is that the \index command gobbles up the following space, even when I use braces; i.e. Foobar, babar\index{indexentry} krangas is typeset as Foobar, babarkrangas Is this normal behaviour? Must I manually insert a space there? > (let's move this discussion to the context list since it's not > related to pdftex) OK. > Hans -- Magnus Lie Hetland "Nothing shocks me. I'm a scientist." http://hetland.org -- Indiana Jones

1 0

m-bib question
by Bruce D'Arcus 15 Mar '03

15 Mar '03

IIRC, isn't it the case that texexec should take care of the bibtex run needed for mbib? Am finding I need to run bibtex before texexec to get it to work... Bruce

5 6

module: t-layout now available
by Patrick Gundlach 14 Mar '03

14 Mar '03

Dear ConTeXt hackers, I have just uploaded a first version of my layout module. It displays the layout of the current page as well as some dimensions. Get it at http://levana.de/context/ Or directly at http://levana.de/context/layout/t-layout.tex An example pdf is at http://levana.de/context/layout/testlay.pdf Use it with \usemodule[layout] and show the layout with \layout Have fun and please don't hesitate to send comment. Patrick

3 3

breaking text in mp code
by Patrick Gundlach 14 Mar '03

14 Mar '03

Hello all, I try to get a label in metafun that is broken into two lines: some text the following \break is silently ignored. Putting the textext inside a vbox did not help. ================================================== % interface=en output=pdf \starttext \startMPcode label (textext("some\break text"),origin); \stopMPcode \stoptext ================================================== How do I get the some text in two lines? Patrick

2 2

Newspaper in ConTeXt?
by Giuseppe Bilotta 14 Mar '03

14 Mar '03

I seem to recall from various discussions that ConTeXt has some features that would come useful to typeset newspaper and similar stuff (columnsets being one of them, IIRC). Are there example of their usage, and possibly some kind of manual? -- Giuseppe "Oblomov" Bilotta

2 1

Interactive TOC bug?
by varheit＠gmx.de 13 Mar '03

13 Mar '03

Hi, In a larger project, I set up an interactive menu that links to the sections of the current chapter. Running out of screen estate, I changed the layout of the TOC to alternative=d. Now all I got was the error message at the bottom of this mail. The error message can be avoided, if the line ...interaction=all.. is commented. Also, keeping that line and using a different alternative=... works. This may be a bug. I searched the mailing list for this, without success. So I do apologize, if this problem had been discussed earlier. Vik \setupinteraction[state=start] \setupcolors[state=start] \setuplist[chapter][interaction=all] \starttext \placecontent[alternative=d] \chapter{Donald} \input knuth \stoptext ! Undefined control sequence. <argument> \makelijstelement \v!paginanummer {\dolistattributes {\v!hoofdstu... \firstofoneargument #1->#1 \dosomelijstelement ...\translatednumber [#5]}}}}} }\donetrue \doifnothing {#... \dodolijstelement ...ment {#1}{#2}{#3}{#4}{#5}{#6} \global \utilitydonetrue l.8 ...pter}{1}{1}{Donald}{2::0:1:0:0:0:0:0::2}{2} -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!

1 0

Problem with references
by Stefan Karlsson 13 Mar '03

13 Mar '03

I can't get references to work -- maybe I'm making some beginner's mistake. Anyway, the output from the following file contains "??" where the page numbers should have been: %%%%%%%%%%%%%%%%%%%%%%%%%%%% \starttext \title [pointer1] {The title} Some text. \subject [pointer2] {A subject} Some more text. Bla, bla \at{page}[pointer1] bla bla bla \at{page}[pointer2]. \stoptext %%%%%%%%%%%%%%%%%%%%%%%%%%%% Note: I'm using the latest stable release (March 3, 2003). Best regards Stefan

6 23

typesetting chapter--label for cross references
by Guy Worthington 12 Mar '03

12 Mar '03

I'd like to display a cross reference, using a en-dash to separate the chapter number from the text being cross referenced. In the example below, if you look at label attached to the example caption "A Sample XML file," you'll see that it is typeset as Example~1--1 however if you look at the cross reference to the example, it is typeset as Example~1.1 how do I change the period (.) separator in the cross reference to an en-dash separator (--). ----- \defineenumeration [example] [location=serried, text=Example, before=\blank, after=\blank, way=bychapter, style=italic, separator=--] \starttext \chapter{One} \in{Example}[ex:Simple-doc] has the chapter number separated from the example number by a period, and not an en-dash. \example[ex:Simple-doc] A Sample XML file \startXML <?xml version="1.0"?> <?xml-stylesheet href="simple-doc.xsl" type="text/xsl"?> \stopXML \stoptext -----

2 2

problem with tables
by Martin Kolařík 12 Mar '03

12 Mar '03

Hi Hans, I've found the following problem after I instaled last beta. With my previous version (9,10/2002?) it worked fine. I can debug it on my side, but probably you find the cause and the solution more quickly: <...many lines of log...> ! Undefined control sequence. <argument> \localwidth \ExpandBothAfter ...anded {\noexpand #1{#2 }{#3}}\@@expanded \inTBLcell ...width {\v!passend ,\v!ruim } {} {\scratchdimen \gettbla... \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Undefined control sequence. <argument> ...L \relax \ifdim \localwidth >\scratchdimen \settblaut \... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... \eTABLE ...{\row }{\col }}}\eTBL }\endTBL \egroup \egroup \popTBL ... l.409 } ? ! Missing number, treated as zero. <to be read again> > <argument> ... \relax \ifdim \localwidth > \scratchdimen \settblaut \c... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Illegal unit of measure (pt inserted). <to be read again> > <argument> ... \relax \ifdim \localwidth > \scratchdimen \settblaut \c... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Missing \cr inserted. <inserted text> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... \eTABLE ...{\row }{\col }}}\eTBL }\endTBL \egroup \egroup \popTBL ... l.409 } ? ! Missing } inserted. <inserted text> } <to be read again> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Missing \cr inserted. <inserted text> \cr <to be read again> } <to be read again> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... ... l.409 } -------- Martin Kolarik Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302 tel. +420 603 498 498, fax +420 577 107 171 web: http://www.mii.cz -------- e-mail: kolarik(a)mii.cz e-mail: kolarik(a)click.cz tel. +420 603 535 593 -------- Martin Kolarik Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302 tel. +420 603 498 498, fax +420 577 107 171 web: http://www.mii.cz -------- e-mail: kolarik(a)mii.cz e-mail: kolarik(a)click.cz tel. +420 603 535 593

3 11

Mac input encodings
by Adam Lindsay 12 Mar '03

12 Mar '03

Hi all, Prompted by this weekend's discussion of input regimes, I took a look at the one for the Mac's Western encoding (initiated by Michel Bovani), and hopefully revised it to be nearly complete for characters (missing four in the range 128-255). Mac users might like to take a look at this file, and verify that it does what I suggest. Usage: put the attached regi-mac.tex in your path, and either rebuild your format files (i.e., texexec --make ...), or explicitly \input this file in your source. Add the line "\enableregime[mac]" to your source. Type søme tèxt with «aççents» ånd öther odd characters. Does it work? Adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay atl(a)comp.lancs.ac.uk Computing Dept, Lancaster University +44(0)1524/594.537 Lancaster, LA1 4YR, UK Fax:+44(0)1524/593.608 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

3 4

Re: [NTG-context] What DTD for a thesis
by Hans Hagen 12 Mar '03

12 Mar '03

At 10:55 AM 1/20/2003 +0100, you wrote: >Hi, > >I'm considering of writing a thesis using XML (instead of plain ConTeXt). >What DTD is best suited? The main point is good output, but I want to be >able to convert this document to e.g. HTML without too much hessle. > >I thought about using ContML + MathML, but I'd like to know whether you >have a better suggestion. contml sounds ok to me; we use it here in project for some big customers; if you need additional functionality, let me know ... [btw, there are xml interfaces for flowcharts, stepcharts, chemistry, units ...] Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

6 19

Re: [NTG-context] Re: why btex...etex or textext() does not work?
by Hans Hagen 12 Mar '03

12 Mar '03

At 10:39 AM 3/11/2003 +0100, you wrote: > > I bet you don't have \protectbufferstrue enabled in > > cont-sys.tex. Please double check and enable this option if disabled. > >Ou, yesss! Have I miss this switch in the documentation (metafun, ...) >or it is secret options with indent to inprove ConTeXt skils >by spending some days by searching the code? ;-) > >Thanks for the answer (to Patrick) and many thanks (to Hans) for >fascinating ConTeXt. It is only one sw I know to create document in the >form of dodecahedron (after glueing) with photo on every face with >semitransparent text along the curve to fit deaf place in the photo. sounds interesting, how about writing an article on that (the ntg maps is always looking for articles) (btw, anyone is invited to write articles) Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

1 0

textext
by Hans van der Meer 12 Mar '03

12 Mar '03

Hi Hans I am placing metapost figures in the text: \placefigure{}{\startMPgraphic ...... label.top(textext("\tfx \#3"),z0) \stopMPgraphic\loadcurrentMPgraphic{}\placeMPgraphic} The \# macro disappears and nothing shows up in my figure. The same with other characters as \lbrace\rbrace. How come? Do I misunderstand something? It would be a pity if some characters could not be typeset in figures. Thanks for looking into it. Hans van der Meer

3 2

FLOWcharts: stray arrows in clipped regions
by "Hüsing, Johannes" 12 Mar '03

12 Mar '03

Dear all, when I process the file attached, I get arrows where they don't belong. Could somebody guide me to what I am doing wrong here? Groetjes Johannes

4 3

naming relative paths within a project
by Guy Worthington 12 Mar '03

12 Mar '03

I've got a very short question, but coupled to a very long explanation, my question is: when referencing a component file from within a product file (and given that the component file is stored in the same directory as the product file, which is in a sub-directory below my project file) must I include the relative path of the component file from my project directory, through my sub-directories to my component file, or can I just refer to the component's filename. Now here is the actual example. I've done a little bit of ASCII artwork below showing the directory structure that I'm following. My artwork isn't the best, so I've also include some explanation. Project | ---- EnviromentPageLayout.tex (global environment file) | ---- Project.tex (project file) | |----| | FrontMatter (directory) | | | ---- EnvironmentFrontMatter.tex (local environment file) | | | ---- ProductFrontMatter.tex (product file) | | | ---- TitlePage.tex (component file) | | | ---- Contents.tex (component file) | | | ---- Preface (component file) | |----| | BodyMatter (directory) | | | ---- EnvironmentBodyMatter.tex (local environment file) | | | ---- ProductBodyMatter.tex (product file) | | | ---- Chapter01.tex (component file) | | | ---- Chapter02.tex (component file) | | |----| BackMatter (directory) | ---- EnvironmentBackMatter.tex (local environment file) | ---- ProductBackMatter.tex (product file) | ---- Appendix01.tex (component file) | ---- Index.tex (component file) In my Project directory I have two files: 1) EnvironmentPageLayout.tex If you are interested in an environment, the one I've based mine on is the one posted by David Arnold http://ml-archives.mini.pw.edu.pl/ntg-context/msg02853.html 2) Project.tex ---- %project file \startproject Project \environment EnvironmentPageLayout \product FrontMatter/ProductFrontMatter \product BodyMatter/ProductBodyMatter \product BackMatter/ProductBackMatter \stopproject ---

2 1

Learning ConTeXt: \setupitemize
by Gary Pajer 11 Mar '03

11 Mar '03

I'm learning ConTeXt, and I've chosen to beat up on \setupitemize to see how things work. (If the answers to my question are in some doc somewhere, please tell me where it is!) Consider the file below. I expected to see a hairline above the second itemization, and indeed I do. But if I remove the "columns" specifier, the hairline does not appear. Is this the correct behavior, or a bug? Also: what does the keyword "beforehead" do? If I replace "before" with "beforehead" in the example, I get nothing. Is it in the docs somewhere? In the lists of keywords for many commands there are parameters listed that I can't figure out. Some of them seem to do nothing, but I always wonder if they only operate in conjunction with some other feature, or I haven't implemented them correctly. Some of them do something, but I can't figure out what the rule is. Is there a doc somewhere describing the keywords? Is it in the manual and I've missed it? Thanks, Gary Pajer ConTeXt 2003.3.9 / up-to-date MikTeX / Win98 ----------------------------------------- \setupitemize[1][n] \setupitemize[2][a][before=\hairline] % \starttext % \startitemize \item Level One % \startitemize \item first \item second \item third \stopitemize % \stopitemize \stoptext

2 1

How to change linewidth of a frame?
by Maurice Diamantini 11 Mar '03

11 Mar '03

Rebonjour! I'm trying to modyfy the title of my slides. So I tried this command (that I just pick on the ntg-context list, thank you :-) \setuphead[Topic] [textcommand=\doTitle] \def\doTitle#1{% \bgroup \setupframed [offset=0.3ex,linewidth=2pt,framecolor=red] \framed{\blue \ss #1}% \egroup% } But the linewidth as no effect (it is not in the documented \setuphead options, but a just try it. Also, is it possible to set the linestyle to "daashed" or something like that? -- Maurice.Diamantini(a)ensta.fr - ENSTA/LMA École Nationale Supérieure de Techniques Avancées Laboratoire de Mathématiques Appliquées http://www.ensta.fr/~diam

3 2

\inframed in table
by varheit＠gmx.de 11 Mar '03

11 Mar '03

Hi, maybe a very simple question: In the following table the formatting of the framed elements is strange ----- cut ----- \starttext \bTABLE \bTABLEhead \bTR \bTH Keyboard Shortcut \eTH\bTH Description \eTH \eTR \eTABLEhead \bTABLEbody \bTR \bTD \inframed{:} + \inframed{q} + \inframed{Enter} \eTD\bTD Quit the program \eTD \eTR \eTABLEbody \eTABLE \stoptext how can I make sure both framed texts stay on one line without using \hbox. There is enough space in the cell so the line break should not occur at all. Vik -- +++ GMX - Mail, Messaging & more http://www.gmx.net +++ Bitte lächeln! Fotogalerie online mit GMX ohne eigene Homepage!

2 1

why btex...etex or textext() does not work?
by Vit Zyka 11 Mar '03

11 Mar '03

Hallo ConTeXt list member, I am new member in the list so apologize if I ask for something trivial. But I have been looking in documentation, in ConTeXt source code, in the Net... Unsuccessfully. Perhaps someone here will known. I have this simple file zk.tex: %--------------------- \starttext Hallo. \startuseMPgraphic{zk} picture p; p:= btex Text1 etex; % p:= textext("Text2"); % label(btex Text3 etex, origin); draw p; draw origin--(1cm,1cm); \stopuseMPgraphic \useMPgraphic{zk} \stoptext %---------------------- When I run texexec zk the compilation pass successfuly but the result is without line and "Text1". In the case of "Text2" I obtain line and "unknown" (picture) text and in the case of "Text3" the same as in "Text1". The log file from my recent context distribution on Linux web2c is in the attachment. The file mpgraph.mpx is created with correct content (Text1). But next run of metapost does not include it. The only way how to obtain desired result is to run mpost directly mpost mpgraph.mp But it is not possible with the "textext". The instalation is standard. Only I set \setupoutput[pdftex] \usesymbols[nav] \setupsymbolset[navigation 1] \recycleMPslotstrue \runMPgraphicstrue \runMPTEXgraphicstrue \useMETAFUNformattrue in cont-sys.tex So, what I am doing worse? Thanks Vit -- _________________________________ | Vit Zyka, researcher, CTU FEE | | Center for Machine Perception | | zyka@ http://cmp.felk.cvut.cz | ---------------------------------

3 3

Table problem
by Willi Egger 11 Mar '03

11 Mar '03

Hi Hans, I need to make a set of tables, which are quite simple. I wanted to use the \starttable..\stoptable environment. However I get very strange results in the last column (p-column) Please have a look at the test.tex file. Do I something in a wrong way or is there something broken? Thanks for your support. Willi p.s. I am using the beta of 04.03.2003 with a format of 09-03-2003.

3 4