- ntg-context - Mailing Lists

again inmargin problems
by Willi Egger 15 Oct '03

15 Oct '03

Dear gang, Thanks Bill for your reply on my previous mail concerning struggles with the inmargin texts. As you can see I explicitely set the width of the margins. In order to make things easier to see I attach a minimal test file. Does anybody see the clue, how to tell Context to use the full marginwidth? Cheers Willi

1 0

Odp: Re: [NTG-context] Visual creators for ConTeXt
by ^Nitram^ 15 Oct '03

15 Oct '03

Hi, [cut seggestion] Ok - I wait for any comments and I will work for improving functionality - but of course I have limited time for working on it. ;( But after weekend I think there will be much more ;) > Is is it posible that the popu-window for changing the shape and [cut] Hmm... For now the 'window' is calling 'in reference' to changing element - for elements near side of document this menu is hidding and scrolling is needed - I will try do it automatically ;) And also scrolling to actual choiced element type in that long list of types ;) > The table creator looks promising. Nice to read polish helptexts :-) It is a mistake, of course ;) Have someone a little time to writing texts in english ? ;) My knolwedge of English is a little poor, so sometimes I have a problems ;( > Nice overview of the commands. Is there a "copy to clipboard" > intended? Of course ;) > I hope you will further invest into this project. I hope so, too ;) I will try implement also setups for \setupTABLE (especially odd, even columns and rows), so the question is: is somewhere examples how use xml commands instead setupTABLE ? I would like make alternative choice to generating code - for bTABLE-eTABLE environment and <table>-</table> also. -- Best regards Martin

1 0

Re: [NTG-context] Visual creators for ConTeXt
by ^Nitram^ 15 Oct '03

15 Oct '03

Hi, > (btw, do you use the xml alternative of the command reference?) I'm sorry - could you explain this question?... ;) Parameters for commands I get from manual - I had a short script in php which made a code in javascript - that is a cause of many errors in these 'creators'... But the code is preparing to making help on each parameter and each value, but where can I find so detailed description ;) I'm realy new user in ConTeXt - about 2 months (no experience in any TeX system before) so you must forgive my inexperience ;) -- Best regards Martin

2 1

Re: [NTG-context] Re: texfont and type-tmf.dat
by George N. White III 15 Oct '03

15 Oct '03

On Tue, 14 Oct 2003, Nigel King wrote: > > Why do you whish to reinstall all the supplied fonts? Or do you just > > want to learn how to use texfont? > I simply wish to use the fonts as most others do (I think) and I am unable > to because of this bug. The normal context fonts do not exist on Gerben's > version. Before Gerben's reorganisation they were made by texfont, this now > does not work because of what I believe to be a simple (I do not understand > Perl otherwise I would have a go at fixing it) bug in texfont. Maybe I am > wrong but I am beginning to find this extremely frustrating (7 months). Once > I realised that somebody was working on texfont 1.8 I had hoped for a fix. On all the systems I use, (linux, SGI Irix, Win32 with texLive) you have to run texfont to generate tfm's, vf's and map files for fonts other than CM. The last time I tried to run texfont (from the final TeX Live 2003 inst iso), it tried to use a lower-cased version of the install path, e.g., /opt/texline instead of /opt/texLive. > If no developer/Perl expert has Gerbens version of tetex perhaps I could > help debug if a version was supplied to me that printed out the full path > that texfont was looking for files in. The --fontroot option or kpsewhich > lookup appears to be at fault but I have no debugging facilities. > > Any suggestions (other than giving up) gratefully received. You will have to learn a tiny bit of perl (which is easier than learning TeX). -- George N. White III <aa056(a)chebucto.ns.ca>

2 1

Re: [NTG-context] texfont and type-tmf.dat
by Nigel King 15 Oct '03

15 Oct '03

Hi, I am posting this message I posted to the 'OS X TeX' group earlier this year relating to the same issue that Mathew is raising. I had no luck then but am hoping for more success now there are two of us. Hans says 'this is under discussion now with thomas/staszek/etc: has to do with urw metrics not being in tetex by default (they are on tex live)' However, Gerben's i-Installer installs them here in a different location than normal. (I think these are the only pair of files that are necessary for utmb8a to work.) /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/times/utmb8a.afm /usr/local/teTeX/share/texmf.tetex/fonts/type1/urw/times/utmb8a.pfb I believe that the problem is merely with texroot as I state below. Further evidence for this is that it nearly all worked before Gerben rearranged the directories. Earlier message....... Hi, Some of my previous font problems here were due to not enabling all of the font map file in the final configuration of the install. I think someone else had the same problem. Adobekb.tex is now helping me well, however I am finding it necessary still to run with the Context font system for some documents for the moment, and for this texfont has to run to create the various font files. Running the single command texfont --en=8r --ve=urw --co=courier --so=auto Should work but returns processing aborted : unknown tex root /sw/share/texmf/ Clearly texroot is set incorrectly so forcing that texfont --en=8r --ve=urw --co=courier --so=auto --fontroot=/usr/local/teTeX/share/texmf.tetex/ Should work but returns processing aborted : unknown subpath ../fonts/afm/urw/courier And yet /usr/local/teTeX/share/texmf.tetex/fonts/afm/urw/courier/ucrb8a.afm Exists This process worked in the v2 version of the i-installer indeed still works when reinstalled. I am presuming that the new problem is because of the texmf.tetex that the texfont perl script is now not able to understand. Perl is beyond my small brain! Any help much appreciated -- Nigel

5 19

uncompatibility?
by Pawel Jackowski na Onet 14 Oct '03

14 Oct '03

Hi all! I've installed TeX based on tl8 which is used paralely with based on tl7. Attached ZIP contains TeX code and two outputs with logs; tl7 and 8, which are quite different... There are some warnings in newer one (about doubled map entries) but shouldn't play a role here. Thanks for any hints! Regards, Pawe/l

3 11

Re: font mystery
by Thomas A.Schmitz 14 Oct '03

14 Oct '03

Maybe one further element that would suggest Context is using a cached copy of the tfm-file instead of the newly created file: when I move the file Myfont.tfm out of the $home/texmf/fonts/tfm directory, pdftex gives me the expected error "! I can't find file `Myfont'." However, Context will still happily produce output--with an outdated copy of the tfm! So context must be caching it somewhere, and I need to flush that cache. Anyone an idea how this can be done? Thanks Thomas

4 8

TeX Live 2003 miseries.
by John Culleton 14 Oct '03

14 Oct '03

I installed the latest version of TeXLive 2003 (the so-called demo version) and did the fmtutil and texhash bit. When I ran a job for a customer, texexec hung up at the point where a graphic was being loaded. So I went back to last year's texlive in a terrible hurry. That worked fine. Earlier, when TeXLive 2003 was still in beta they left out texexec altogether. Has anyone else tried Context using graphics on TeXLive 2003? I hate to report a bug to Tug if my experience is unique. OTOH if the iso image is defective in some way I do need to let someone know pronto. -- John Culleton Able Typesetters and Indexers http://wexfordpress.com

2 1

Re: Overfull boxes using m-cweb
by Edwin Wisse 14 Oct '03

14 Oct '03

Patrick Grundlach wrote: >>I am running into overfull boxes when including a weaved cweb file into >>a context document. >> >I don't really understand your question. You have overfull boxes in >your TeX run. That is a "normal" TeX feature. They can usually be >avoided. But in your case I guess that it is something which you >cannot avoid. But how should we know? I guess that the cweb module is >not that commonly used. So you might be better of and supply a >minimal (!) but complete (!) example. > Hi, Thanks for your answer. My problem is the fact that line breaks look fine in the "normal" part of the document but in the weaved (cweb) part line breaking goes wrong. Many words extend into the right margin. I have a weaved cweb file called assignment.tex. It is included in the main document using the standard cweb module in Context: --------------------------------------------- \usemodule[cweb] ...and.... \processCWEBsource assignment --------------------------------------------- To give you an idea what assignment.tex looks like: -------------------------------------------------------------------------------------------------- % \input cwebmac \N{1}{1}Dr Snow map display package. This display program is a Unigis assignment for the application development module. This is a small application which loads file with point and line data and displays it in a window. -------------------------------------------------------------------------------------------------- Nothing surprising there. The output looks fine, except for the words extending into the right margin. The problem only occurs in the weaved part of the document so it is a safe bet it is somehow caused by the cweb macros Edwin

1 0

m-cweb.tex tolerances and penalties
by Edwin Wisse 13 Oct '03

13 Oct '03

Hello, I've used the m-cweb module to put a weaved program source in a document. I noticed that this results in an awful lot of overful boxes. Anyone with similar experiences? What can I do about it? Regards, Edwin

1 0

\inmargin{} problems with typsetting inmargin texts
by Willi Egger 12 Oct '03

12 Oct '03

Hi all, I got a text, where the left i.e. the inner margin is small (.8cm) and the right margin is larger (1.7cm). This layout is intended for a doublesided print. On different places I have to insert a \inmargin{\bf Let op!} (i.e. pay attention). The strange thing is, that on lefthandpages the inmargin text is typset in the left (outer) margin but it is typeset on two lines, indicating that the measures of the leftmargin of the righthandpage is used. - Is this a normal behaviour or otherwise how can I instruct ConTeXt to use the whole width of the left i.e. outer margin? Thanks for advising Willi

2 1

\usepath[...] \usesubpath[...] ???
by Bernd Militzer 12 Oct '03

12 Oct '03

Hi Hans, thanks for Your help, but I am sorry \usepath[...] \usesubpath[...] do not work in that way I thought. I start in /home/bmi/import/TestConTeXt/blocks/ with four files: demo.tex = the project-file eniro.tex = the enviroment student.tex = a data-file with two text-blocks test.tex = a work-file, which will use text-blocks from student.tex all things are pretty good -- in test.tex I can use the text-blocks from student.tex (student.tub). When I separate the dat-file = student.tex and the work-file work-file = test.text in different subdirs it ist not possible to use the text-blocks form student.tex in test.tex ~/import/TestConTeXt/blocks/data/student.tex with all help-files -- all things are ok ~/import/TestConTeXt/blocks/work/test.tex running texexec test.tex, no text-block from student.tex In file test.tmp: % test.top \unprotect \setupsystem[\c!gebied={/home/bmi/}] \setupsystem[\c!n=1] \setupsystem[inputfile=test.tex] \protect How have I to set up the path? \usepath[/import/TestConTeXt/blocks/] or \usepath[/home/bmi/import/TestConTeXt/blocks/] ??? \usesubpath[dat, work] or \usesubpath[dat/, work/] ??? I have no idea -- please give me a hint to stop my frustation! thanks Bernd

2 1

Re: [NTG-context] Re: texfont and type-tmf.dat
by George White 10 Oct '03

10 Oct '03

On Thu, 9 Oct 2003, Patrick Gundlach wrote: > [...] > According to to the statements from Walter Schmidt, a TeX font expert > (perhaps I should say *the* TeX font expert?) in > http://tug.daimi.au.dk/archives/tex-fonts/msg01328.html > > \quote{% .... > Note, however, that embedding of URW's fonts, while using the > (PSNFSS) Adobe Base35 metrics, will _not_ lead to any bugs! > The character metrics are matching! Differences in the > "character bounding boxes" are irrelevant for the advance widths! > The only drawback is, that you cannot access those glyphs that > are in the URW fonts, but not in the Adobe fonts. Indeed, this > could be overcome by providing particular metrics and VFs for > the URW fonts -- see below. } Hans has demonstated that even the Adobe fonts don't have the same metrics. It should also be noted that in practice, if you don't embed fonts, you will often get font substitutions in the PS rasterizer (e.g., ghostscript defaults will use URW fonts where the file requests a Base35 font, current acrobat reader will use Arial where the file requests Helvetica, some printers with clone interpreters (many recent HP models) use "clone" fonts. There are several versions of the URW fonts in use now: two ghostscript versions, and a number of versions with additional glyphs distributed with linux (and I am told that the software used to create the recent versions may have tampered with the metrics for glyphs that were not changed). If you embed the URW fonts using the original URW names it is clear which fonts are to be used. This discourages people from "optimizing" your files by stripping out the fonts. For archival EPS figures it makes sense to go further and replace fonts with outline paths. In this way the figures should remain useful even after the fonts are no longer supported by the available rasterizers. -- George White <aa056(a)chebucto.ns.ca> <gnw3(a)acm.org> 189 Parklea Dr., Head of St. Margarets Bay, Nova Scotia B3Z 2G6

2 1

combination figures
by Ed L Cashin 09 Oct '03

09 Oct '03

Hi. I have the following code in my source, to try to get a combination of two figures in one: \placefigure {10,000 random|-|value pixels added} \startcombination[2] {\externalfigure[noise1][height=.4\textwidth]}{image 1} {\externalfigure[noise2][height=.4\textwidth]}{image 2} \stopcombination ... but I get an error, so I am probably doing something wrong. The whole log is below. My context version is pretty new, as the transcript shows. Thanks for any advice! <protectionstate 0> system : cont-new loaded (/opt/teTeX-1.0.7/share/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (/opt/teTeX-1.0.7/share/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/opt/teTeX-1.0.7/share/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) bodyfont : 12pt rm is loaded language : patterns 2:2-en-2 3:2-uk-2 4:2-de-2 5:2-fr-2 7:2-it-2 2-nl-2 l oaded specials : tex,postscript,rokicki loaded system : p.top loaded (./p.top specials : loading definition file tpd (/opt/teTeX-1.0.7/share/texmf/tex/context/base/spec-tpd.tex systems : please update your pdfTeX binaries specials : loading definition file fdf (/opt/teTeX-1.0.7/share/texmf/tex/context/base/spec-fdf.tex <unprotect 3> <unprotect 4> system (E-TEX) : [line 1907] \ifcsname <protect 4> <protect 3>) specials : fdf loaded <unprotect 3> <protect 3>) specials : fdf,tpd loaded ) pdftex : needs map file: original-context-symbol.map pdftex : needs map file: pl0-ams-cmr.map pdftex : needs map file: original-vogel-symbol.map (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) (./p.tuo) systems : begin file p at line 6 section : 1 Image Conditioning subsection : 1.1 Noise addition ! Missing { inserted. <to be read again> \let \noshowargumenterror ->\let \expectedarguments \noexpectedarguments \dodoubleempty #1->\noshowargumenterror \doifnextcharelse [{\dodoubletestemp... l.27 \startcombination [2] ? ! Emergency stop. <to be read again> \let \noshowargumenterror ->\let \expectedarguments \noexpectedarguments \dodoubleempty #1->\noshowargumenterror \doifnextcharelse [{\dodoubletestemp... l.27 \startcombination [2] ! ==> Fatal error occurred, the output PDF file not finished! Transcript written on p.log. return code : 256 run time : 1 seconds total run time : 1 seconds make: *** [p.pdf] Error 1 Compilation exited abnormally with code 2 at Thu Oct 9 11:19:52 -- --Ed L Cashin | PGP public key: ecashin(a)uga.edu | http://noserose.net/e/pgp/

1 1

first attempt to run mp
by Pawel Jackowski na Onet 09 Oct '03

09 Oct '03

Hi all! I've just made a quick test -- running metapost with ConTeXt. The sample code was just: \starttext The simplest metapost code sample \startMPgraphic fill unitsquare scaled 123 withcolor (.2,.3,.4) ; \stopMPgraphic \stoptext which looks ok, right? And of course mpost creates nice navy square from that code. But running texexec --automprun sample.mp cause a serious system error; ''There is a problem with mpost.exe and bla bla bla''. Smart and clever' windows XP try to report that problem to microsoft. The problem occur just after terminal says This is MetaPost, Version 0.641 (Web2c 7.3.7x) (mpgraph.mp and after that system display an error box. As manual says I 've made some changes in texmf.cnf: openout_any = a shell_escape = t allow_multiple_suffixes = f What should I do next to catch 'serious system error' while running metapost code included in tex code? Is the problem comonly known? Thanks, Pawe/l

6 14

persisent default font
by Pawel Jackowski na WP 08 Oct '03

08 Oct '03

Hi all! I came across the same problem twice in different operating systems, so... As I wrote about two weeks ago, I 've generated context format with command texexec --make --language=pl,en,de --bodyfont=plr en expecting to have format 'cont-en.efmt' (with english interface) which includes polish and english hyphenation patterns, with PL as default language and PLR as default font. LOG file created during format creation shows what I would expect: \unprotect \installlanguage[\s!pl][\c!status=\v!start] \installlanguage[\s!en][\c!status=\v!start] \installlanguage[\s!de][\c!status=\v!start] \setupcurrentlanguage[\s!pl] \definetypescriptsynonym[cmr][plr]\definefilesynonym[font-cmr][font-plr] \protect \endinput The thing I can't understand is that when I compile any file (like 'Hello wórld!\end') log file says: language : language en is active and Missing character: There is no ˇ in font cmr12! and so on. Encodings doesn't matter in this case. The point is why cmr12, not plr12 is used and why english language, not polish is active? Oh, by the way; how can I change default TeX machine for ConTeXt? I mean how to change it using still 'texexec' command (not 'any_tex_machine &cont-en.efmt')? And another question; how to generate *.fmt format (for TeX, not for eTeX) with 'texexec --make' command? If one use fmtutil there is fmtutil.cfg file which allows user to map formats with engines. But where can I set it for 'texexec --make'? Thanks for any hints, Pawe/l

2 1

(can be better done global) ???
by Steffen Wolfrum 08 Oct '03

08 Oct '03

Hi, when defining an unusual size for my footnotes \setupfootnotes[bodyfont=8.5pt, ... ] I get an amazing amount of messages bodyfont: bodyfont XXpt is defined (can be better done global) with XX being various sizes. Which makes processing real slow... What is meant by "global defining"? Where should I write a "global" definition and how does it look like? Sorry, but I really have now idea. Thank you, Steffen

4 4

Odp: Re: [NTG-context] The smallest instalation for work with ConTeXt and MetaFun (TeXLive8) ?
by ^Nitram^ 08 Oct '03

08 Oct '03

Hi, [cut] >> What may be wrong ? [cut] > Does it help you ? I'm a little 'confused' in installation of ConTeXt now ;) Yours advices (and texmf.cnf from Hans) didn't works on my mobile machine with previous (recommended) installation. But today I tried install it on other computer and I: - get 'generic basic' type of installation (with pictex(2) and langpolish) - without any changes - works fine, but no polish characters and metapost - make plr fonts and metafun format - fine, but no metapost - uncomment \useMETAFUNformattrue, \reuseMPslotstrue, \runMPgraphicstrue, \runMPTEXgraphicstrue, \runutilityfiletrue in texmf/tex/context/base/cont-sys.ori and copy to cont-sys.tex - everything works fine ;) So, I will check it on my second computer - soon I will be expert in ConTeXt instalation ;))) PS. Thanks to everybody who helps me in my first steps in ConTeXt - tomorrow I send the link to (early beta version ;) visual creators of tables and flowcharts in ConTeXt... -- Best regards Martin

1 0

schema/dtd for x-contml.tex
by Patrick Gundlach 07 Oct '03

07 Oct '03

Dear ConTeXt users, is there a DTD or a RELAX NG schema for x-contml available? Patrick -- You are your own rainbow!

2 1

Re: Where to go?
by Hans Hagen 07 Oct '03

07 Oct '03

At 02:39 07/10/2003, you wrote: >Hi, > >You probably hate emails like this but I've just started to try and >use context, I've read the minstall.pdf, and started reading a few >other pdfs, but I can't get started. > >texexec --verbose --make en > >produces... > >/usr/bin/fmtutil --byfmt cont-en > >fmtutil: no info for format `cont-en'. > > TeX binary : pdfetex > format(s) : en > >Where can I go for a little help to get it running? I'm sure its just >some small glitch. there is a mailing list in your case, i think that you need to run fmtutil --edit and uncomment the context lines, as an alternative, you can try texexec --make --alone Hans

1 0

Re: [NTG-context] RME and INI
by Pawel Jackowski na Onet 06 Oct '03

06 Oct '03

Hi again October 06, 2003 9:18 AM Pawel wrote: > Hi all! > > TEXEXEC documentation and self documented 'texexec.rme' file says that it > should be copied to 'texexec.ini'. First of all; I have two 'texexec.rme' in > TeX tree; first in > > ...TeX/context/config > > the second in > > ...TeX/context/perltk Of course should be '...TeX/texmf/context/config' and '...TeX/texmf/context/perltk' respectively. Sorry for that. Monday, October 06, 2003 11:17 AM Patrick Gundlach: > What system are you using? I'm using the same TeX installation for both windows and linux (common texmf tree and binaries based on TeXLive7 distribution). The main adventage is that I come across each problem only ones :-) October 06, 2003 11:37 AM George N. White III: >Did you run mktexlsr? Ok, sorry for that stupid mistake. After updating base, 'texexec.ini' is taken into account insead of 'texexec.rme'. But I still can't get an idea of copying '.rme' to '.ini' since '.rme' file can be read as well. Is that an easy way to save orginal config file untouched? The reason I'm so persistant to solve that (probably not crucial) problem is that I'm still spying another problem -- generating format with proper default font information (as described in details in other threads). I thought that texexec config file(s) may be important at that point. But after copying 'texexec.rme' to 'texexec,ini', changing some defaults, like set FmtLanguage to pl set FmtBodyFont to plr and updating ls-R, the problem still appear, means that format generated with proper command texexec --make --language=pl,en --bodyfont=plr en doesn't use the proper default font.... So I'm afraid it's not the solution. Thanks anyway, Pawe/l

3 4

flowcharts: self-reference
by Henning Hraban Ramm 06 Oct '03

06 Oct '03

I'm (mis)using ConTeXt flowcharts for drawing support maps "which device stands where". I don't know how to draw further elements (walls etc.), but that's not that important at the moment. To show the "user side" of a device I'd like to draw an arrow to it. It works with a self-connection on left, top or right, but not at the bottom of a box. \startFLOWcell \name {cRIP} \location {1,1} \text {my RIP} \connection[rr] {cRIP} % works \stopFLOWcell \startFLOWcell \name {pCtP} \shape {15} \location {1,2} \text {my CtP} % \connection[bb] {pCtP} % [bb] to self doesn't work, but [tt], [ll] or [rr] does \stopFLOWcell With [bb] I get the following MP error: This is MetaPost, Version 0.641 (Web2C 7.3.7x) (c_av-mpgraph.mp >> 0 ! Improper transformation argument. <to be read again> ; connect_bottom_bottom->...points[4]shifted(dsp_x); if.dsp_y<0:xypoints[2]:=xy... l.291 connect_bottom_bottom(2,1,0) (2,1,0) ; Hans? Grüßlis vom Hraban! -- http://www.fiee.net/texnique/

1 0

Re: Footnotes
by Steffen Wolfrum 06 Oct '03

06 Oct '03

Hi, Albrecht Kauffmann <alkauffm(a)rz.uni-potsdam.de> wrote: > Hi all, > > does anyone know how to expand the distance between the last text line on > a page and the first footnote? > > With many thanks for any hint > Albrecht you can use the rule option: \def\MyRule{\blackrule[width=0.5\textwidth,height=0.4pt]\blank[15pt]} \setupfootnotes[rule=\MyRule] Steffen

1 0

Bookmark question -- solved, apologize
by Michal Kvasnicka 06 Oct '03

06 Oct '03

Good evening. I apologize for my last question. I solved as soon as I posted the question. I tried the primitive solution {\catcode`\"=12 \placebookmarks[chapter,title,somestuff,section,subsection] } And it works! Apologize again. Michal Kvasnicka

1 0

Bookmarks question
by Michal Kvasnicka 06 Oct '03

06 Oct '03

Good evening. I dare to ask one more question: For many years I use a dirty approach to typesetting quotes. I the document I simply type "words in quotes", and then I switch the quotes to be an active character with some macros. But this brings a lot of garbage to bookmarks. Now it even makes an error with the new version of ConTeXt (ver: 2003.8.21). Can I temporaryly switch quotes to category 12 (just for bookmark processing)? How? With many thanks Michal Kvasnicka P.S. My code is like this: \chardef\clqq=254 \sfcode254=0 \lccode254=0 \chardef\crqq=255 \sfcode255=0 \lccode255=0 \catcode`\"=\active \def\firstquote{\clqq\let"=\secondquote} \def\secondquote{\crqq{}\let"=\firstquote} \let"=\firstquote The error message is this: ! TeX capacity exceeded, sorry [input stack size=3000]. "->\clqq \let " =\secondquote "->\clqq \let " =\secondquote "->\clqq \let " =\secondquote "->\clqq \let " =\secondquote "->\clqq \let " =\secondquote "->\clqq \let " =\secondquote ... l.156 ...ional Banking"}{2::0:A:2:5:0:0:0::64}{66}

1 0