- ntg-context - Mailing Lists

aligning \placetable with bidi
by Idris Samawi Hamid ادريس سماوي ح امد 17 Nov '14

17 Nov '14

Dear gang, In the following, we middle align both \placetable's: ================ \setupbodyfont[tt] \definefont[ALM][file:almfixed.otf*arabic at 12pt] \setupdirections[bidi=global] \setupxtable[width=1in] \showframe \starttext \startalignment[middle] \ALM \placetable[middle,none]{} {\startxtable \startxrow \startxcell Text 1 \stopxcell \startxcell[align=r2l] النص ١ \stopxcell \stopxrow \stopxtable} \placetable[middle,none]{} {\righttoleft \startxtable \startxrow \startxcell[align=r2l] النص ١ \stopxcell \startxcell Text 1 \stopxcell \stopxrow \stopxtable} \stopalignment \stoptext ================ Only the first \placetable is aligned correctly; how do we get the second one -- \righttoleft table -- middle aligned? See attached. Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

2 1

Re: [NTG-context] Support of PDF Optional Content Groups (Layers)
by Christoph Reller 17 Nov '14

17 Nov '14

On Sun, 16 Nov 2014 15:29:20 Hans Hagen wrote: > On 11/16/2014 9:52 PM, Wolfgang Schuster wrote: > > Am 16.11.2014 um 20:47 schrieb Christoph Reller > > > > > > Hi, > > > > > > Has ConTeXt any support for producing a PDF with "optional content > > > groups" (OCGs)? > > > > > > In Adobe's jargon OCGs are also known as "layers" (not to confuse with > > > layers in ConTeXt). See Section "4.10.2 Making Graphical Content > > > Optional" in the PDF Reference 1.7 available at > > > http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/pdf/pdfs/pdf_referen… > > > > > > I cannot find anything on the Wiki nor in the ntg-context emails and > > > grepping through the source code for "ocg" does not give reasonable > > > results. > > > > You have to look for \defineviewerlayer and \startviewerlayer. > > A quick test if your pdf viewer supports is is: > > \showlayoutcomponents > > \starttext > \input tufte > \stoptext Many thanks to all of you Hans, Wolfgang, and Pablo! \definelayer and \startviewerlayer is a nice interface to basic OCGs construction. Is there any way to construct "Set-OCG-State Actions" with ConTeXt? (See Section 8.5 Actions in the PDF Reference.) I admit that this is an advanced feature of PDF and that most viewers apart from the Adobe Reader are not capable of handling OCGs correctly. Kind Regards, Christoph

2 1

Use of a layer for a letterhead
by jdh 17 Nov '14

17 Nov '14

I have created a letterhead layer, which works well for the first page of a multi-page document. I want it to be repeated for each page of a document. How can that be done or does anyone have any pointers or tips on how I can do that? Thank You

2 2

Support of PDF Optional Content Groups (Layers)
by Christoph Reller 17 Nov '14

17 Nov '14

Hi, Has ConTeXt any support for producing a PDF with "optional content groups" (OCGs)? In Adobe's jargon OCGs are also known as "layers" (not to confuse with layers in ConTeXt). See Section "4.10.2 Making Graphical Content Optional" in the PDF Reference 1.7 available at http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/pdf/pdfs/pdf_referen… I cannot find anything on the Wiki nor in the ntg-context emails and grepping through the source code for "ocg" does not give reasonable results. Cheers, Christoph

4 3

extra unwanted interline space in list
by Pablo Rodriguez 16 Nov '14

16 Nov '14

Dear list, I have the following sample: \starttext \startitemize[n] \item \input zapf \item \startitemize[a] \item \input knuth \stopitemize \stopitemize \stoptext For some strange reason, the first line from 2.a. has an extra interline space after it. Is this a bug or am I missing something? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Macros in \start-stopTABLE
by Idris Samawi Hamid ادريس سماوي ح امد 16 Nov '14

16 Nov '14

Dear gang, In the following, the first table works and the second one does not: ===================== \setupbodyfont[tt] \definefont[ALM][file:almfixed.otf*arabic at 12pt] \setupdirections[bidi=global] \define\NCR{\NC \righttoleft \ } \define\NCL{\NC \lefttoright \ } \setupTABLE[c][each][width=1in] \starttext \ALM \placetable[right,none]{} {\startTABLE \NC Text 1 \NC \righttoleft النص 1 \NC\NR \stopTABLE} \placetable[right,none]{} {\startTABLE \NC Text 2 \NCR النص 2 \NC\NR \stopTABLE} \stopalignment ===================== gives "I've run across a `}' that doesn't seem to match anything." What do I need to do to get this macro right here? Best wishes Idris -- Idris Samawi Hamid Professor of Philosophy Colorado State University Fort Collins, CO 80523

3 5

IMHO there is a bug in itemgrops
by Vasiliy Chirkov 16 Nov '14

16 Nov '14

Minimal example: \starttext \defineitemgroup[Enum][levels=3] \setupitemgroup[Enum][each][fit][symbol=n] \setupitemgroup[Enum][1][stopper={}] \setupitemgroup[Enum][2][stopper={***}] \setupitemgroup[Enum][3][stopper={******}] \startEnum \item item 1 \startEnum \item item 1.1 \startEnum \item item 1.1.1 \item item 1.1.2 \stopEnum \item item 1.2 \stopEnum \item item 2 \stopEnum \stoptext When option 'fit' is used with nested lists, calculated max item widths are saved in reverse order. Maxitemwidths are saved at first pass in \stopitemgrup in reverse order, while are read at second pass in \startitem grpoup in sequental order. Am i right? Best regards, Vasiliy

2 1

\xmlinlineverbatim and \xmldisplayverbatim
by Pablo Rodriguez 16 Nov '14

16 Nov '14

Dear list, I’m totally new to processing XML with MkIV. I have read some examples and documents from Thomas. And I have started “Dealing with XML in ConTeXt MkIV” from Hans. >From the documentation, one could state that the (X)HTML tags <code> and <pre> are to be handled with \xmlinlineverbatim and \xmldisplayverbatim. Well, this works fine (although with an undersired output): \startxmlsetups xml:code \xmldisplayverbatim{#1} \stopxmlsetups But replacing \xmldisplayverbatim with \xmlinlineverbatim gives an error. According to the information from http://pragma-ade.com/general/manuals/xml-mkiv.pdf#page=19, it should work. What am I doing wrong here? Many thanks for your help, Pablo XML file: <code>code</code> Environment file: \startxmlsetups xml:test \xmlsetsetup{\xmldocument}{*}{-} \xmlsetsetup{\xmldocument}{code|}{xml:*} \stopxmlsetups \xmlregistersetup{xml:test} \startxmlsetups xml:code \xmlinlineerbatim{#1} \stopxmlsetups -- http://www.ousia.tk

2 2

Strange behavior of a macro with ConTeXt ver : 2014.11.12 9:46 p.m. MKIV beta
by Fabrice Couvreur 16 Nov '14

16 Nov '14

Hi, Macro written by Hans does not work. Best regards, Fabrice % macros=mkvi \starttext \starttexdefinition MyOtherHeader #where #day #month #year #title \defineoverlay[whatever][\useMPgraphic{whatever}] \startuseMPgraphic{whatever} path p; p:=fullsquare xyscaled (\overlaywidth,\overlayheight) squeezed 1pt; fill p withcolor white ; draw p withpen pencircle scaled 2pt withcolor 0.625white ; picture d ; d := textext("\quad#where\space\endash\space\date[d=#day,m=#month,y=#year]\quad") shifted .5[ulcorner p,urcorner p]; fill boundingbox d withcolor white ; draw d ; setbounds currentpicture to p ; \stopuseMPgraphic \framed [ width=\hsize, height=5em, foregroundstyle=\itx, Background=whatever, frame=off, ] {#title } \stoptexdefinition \MyOtherHeader{Premières STMGB-STMGD}{17}{11}{2014}{{\ss \tfb \bf Second degré : résolution d'une équation du second degré}} \stoptext

3 2

Contents again
by Gerben Wierda 15 Nov '14

15 Nov '14

I’ve got \start \switchtobodyfont[9pt] \completecontent[level=chapter] \stop to keep the Table of Contents on one page. But with one more chapter, it is now again spread over two. There is however a lot of whitespace between entries. Can I make the vertical whitespace between entries smaller? G

2 1

placing registers on the same page
by Alan Bowen 15 Nov '14

15 Nov '14

I currently have a problem setting the indices of a book. A minimal example \defineregister[mouse][mice] \setupregister[mouse][n=2,balance=no] \defineregister[house][houses] \setupregister[house][n=2,balance=no] \starttext rodents\mouse{rats+large} home\house{ranch+split-level} \page \placeregister[mouse] \placeregister[house] \stoptext places the second register on its own page. How can I get the second register on the same page as the first? Alan

2 2

Hans Hagen: "an index entry needs an anchor" (Mail Archive 3/19/2014)
by Rudolf Bahr 15 Nov '14

15 Nov '14

Hi, LaTeX "index" command doesn't need an anchor in order to print the page number. Sometimes you can't give the ConTeXt-Command "index" any anchor. Think of an external figure on a page and nothing else, without any text. When I say, for instance: \index{Brigitte Bardot}\strut I get a correct index, but an unsolicited extra empty page, too. What could be a solution? My ConTeXt version is: "ConTeXt ver: 2014.11.12 21:46 MKIV beta fmt: 2014.11.14" Greetings, Rudolf

2 2

two questions on mail merging
by Pablo Rodriguez 12 Nov '14

12 Nov '14

Dear list, I have the following sample kindly provided to me by Jaroslav: \unexpanded\def\lineaction{ \Name\crlf \Address\crlf \Postcode--\City\crlf \page } Well, how can I put this (or a similar) structure inside a layer? A minimal layer would be: \definelayer[MyLayer][state=start] \setlayerframed[MyLayer][frame=off]{merge fields} \setupbackgrounds[page][background={MyLayer}] \starttext a \stoptext Many thanks for your help, Pablo -- http://www.ousia.tk

2 1

TikZ on the garden
by Mojca Miklavec 12 Nov '14

12 Nov '14

Hi, What exactly should I to do with respect to TikZ on the garden (for the minimals)? Switch to the version of TikZ and pgfplots from TL 2014 + replace t-tikz.tex with Hans' version and freeze in that state until TikZ is fixed upstream? Or just freeze at whatever version is in CVS at the moment and patch t-tikz.tex and wait for the patch? Any other/better suggestions? And what version of pgfplots should I take? Does anyone need the latest functionality of TikZ or pgfplots? Ideally it would be nice if TikZ was fixed upstream, but developers are currently busy and would like to understand patches before applying them, so it might take a while before the code gets fixed. I hate having to use CVS to go back in time (svn or git would be easier to deal with; what date to use for CVS), but if that's the only option ... Mojca

2 1

typeset chapter elements
by Meer, H. van der 11 Nov '14

11 Nov '14

I would like to vary the typesetting of chapter titles by formatting the elements chapternumber, title and the word 'chapter' myself. However, the style values of the parameter setup from \setuphead[chapter][] should be used. Needed for this is access to and/or the naming scheme of the paramters: style, textstyle, numberstyle, color, textcolor, numbercolor. To clarify further, in \def\mychaptercode#1#2{...} \setuphead[chapter][command=mychaptercode] the #1 parameter gives the chapternumber typeset in a form that is just not how I want it. Thus instead of using #1 in the code for \mychaptercode I am using \headnumber[chapter]. But then cannot imagine how to set the right style and color. Finally, how is the macro containing the expansion for the chapter,sectiion-designation recalled? It is the macro defined by for example \setuplabeltext[chapter=Hoofdstuk ]. The reference manual does not reveal this as far as I can see. Yhanks in advance for either an answer or a pointer where to find the info. Hans van der Meer

1 0

position of qed symbol in proofs
by Mikael P. Sundqvist 11 Nov '14

11 Nov '14

Hi, I once used \defineenumeration[proof][ text=Proof, closesymbol=\mathematics{\square}, closecommand=\ifmmode\eqno\else\wordright\fi, ] \starttext \startproof This is a simple proof. \stopproof \startproof This is another simple proof that ends with a formula \startformula 1+1=2. \stopformula \stopproof \stoptext to get the \square at the end of proofs, and it worked out well. But with the latest beta (and some previous one(s)), the \square is not placed at the same line as the formula in the second example. Is it broken? Or is there a new syntax? PDF with my result is attached. Best regards, Mikael

3 10

Create an item marker with a counter with Metapost
by Fabrice Couvreur 11 Nov '14

11 Nov '14

Hi, With the book Metafun I created a marker with metapost. How to add a counter ? Best regards, Fabrice \startuseMPgraphic{itemize:fuzzy} numeric u; u:=0.5cm; save p; path p; p := fullcircle xyscaled (u,u) randomized 2pt; pickup pencircle scaled 1pt; fill p withcolor green; draw p withcolor blue; \stopuseMPgraphic \definesymbol[itemize:fuzzy][\useMPgraphic{itemize:fuzzy}] \setupitemize[1][symbol=itemize:fuzzy] \starttext \startitemize \item \input knuth \item \input knuth \stopitemize \stoptext

5 5

mail merge in mkiv?
by Pablo Rodriguez 10 Nov '14

10 Nov '14

Dear list, I would like to be able to use ConTeXt at work for mail merging. The issue here is that I don’t have any clue on how to do it with MKIV. I don’t even know whehter this is possible at all. BTW, searching for "merge" at the wiki, I found http://wiki.contextgarden.net/An_Update_On_Essential_Elements_In_how_can_i_…, which seems spam to me. Is there any way to do mail merge with mkiv? Many thanks for your help, Pablo -- http://www.ousia.tk

4 10

contextgarden wiki down
by Taco Hoekwater 10 Nov '14

10 Nov '14

Hi All, It seems something is seriously wrong with the wiki.contextgarden,net server (also luatex.org and h2o-books.com) My coworker has to go up and check it out in person, so it will be down for a bit longer still. I’ll send a new message once everything is working again. Best wishes, Taco

2 2

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 10 Nov '14

10 Nov '14

On Fri, 7 Nov 2014 09:11:09 +0100 Alan Braslau <alan.braslau(a)cea.fr> wrote > On Thu, 6 Nov 2014 16:15:36 +0100 > Christoph Reller <christoph.reller(a)gmail.com> wrote: > > > Of the above characters the following are disallowed on NTFS > > Not everyone uses NTFS. Another reason for not making a "file-name cleaner" as such, but rather restricting the characters to ascii. Regards, Christoph

2 1

still buggy TOC generation
by Pablo Rodriguez 09 Nov '14

09 Nov '14

Hans, many thanks for the fix in latest beta from 2014.11.08 15:07. I still experience a bug that it wasn’t there before beta from 2014.11.06 14:55. Here you have the sample: \startsetups[placelist:section] \start \setupinterlinespace[line=2.8ex] \placelist[section][alternative=d, pagenumber=no] \par \stop \stopsetups \setuplist [chapter] [before={\blank[big]}, after=\directsetup{placelist:section}] \starttext \title{Inside}\placelist[part,chapter][criterium=all] \chapter{Foreword} \dorecurse{10}{\section{Section from Foreword}} \part{Introduction} \chapter{\ConTeXt\ and digital typography} \dorecurse{10}{\section{Section from Introduction}} \chapter{Chapter 1} \dorecurse{10}{\section{Section from Chapter 1}} \chapter{Chapter 2} \dorecurse{10}{\section{Section from Chapter 2}} \stoptext Only the latest stable version (beta from 2014.01.03 00:40) generates the right TOC, if I remove [criterium=all] from \placelist[part,chapter]. With [criterium=all], I get all section titles in each chapter entry in the TOC. With latest beta from today and removing [criterium=all], the first two chapters listed in items have the section titles from both chapters (which is wrong). Sorry, but isn’t this caused by the changes introduced in beta from 2014.11.06 14:55? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

ConTeXt gobble my mind
by Pierre-François Bonnefoi 09 Nov '14

09 Nov '14

Hello, I've made a lot of improvement to my slides format for my teaching material and I've run into a serious issue with gobbleinput that I can express with with simple lines : \starttext \gobbleuntil\stoptyping \starttyping { printf("%d", data); } \stoptyping This is ignored ! \stoptext How can I use correctly gobbleinput to make it works ? Thank you for your help, kind regards, Pierre-François Bonnefoi. -- Bonnefoi Pierre-Francois | E-mail : bonnefoi(a)unilim.fr http://libpfb.so/ Universite de Limoges, Laboratoire XLIM | Tel : 06 28 18 03 38 123 av Albert Thomas | Mrs. Peel, we're needed... 87060 Limoges CEDEX - FRANCE | The Avengers.

6 18

Numbering in a Table
by Fabrice Couvreur 08 Nov '14

08 Nov '14

Hi, Is it possible to use an itemize environment in a table ? Best regards, Fabrice \starttext \startsetups[table:initialize] \setupTABLE[height=0.8cm,align={middle,lohi}] \setupTABLE[row][1][background=color,backgroundcolor=cyan] \setupTABLE[1][1][background=color,backgroundcolor=white] \setupTABLE[column][1][width=10cm,align={right,lohi}] \setupTABLE[column][2,3,4][width=2.5cm,align={middle,lohi}] \setupTABLE[1][1][frame=off] \stopsetups \bTABLE[setups=table:initialize] \bTR \bTD \eTD \bTD Vrai \eTD \bTD Faux \eTD \bTD Peut-être \eTD \eTR \bTR \bTD \color[red]{a.} Les droites (IJ) et (AB) sont parallèles.\eTD \bTD \eTD \bTD \eTD \bTD \eTD \eTR \bTR \bTD \color[red]{b.} Les droites (JK) et (BC) sont parallèles. \eTD \bTD \eTD \bTD \eTD \bTD \eTD \eTR \eTABLE{} \stopmidaligned \stopitemize \stoptext

3 4

\endnote beyond \placenotes[endnote]
by Gerben Wierda 08 Nov '14

08 Nov '14

I've got the \placenote[endnotes] as first appendix in a book but I want to have an \endnote in a next appendix. The number appears, but the endnote is not added to the actual endnotes. Impossible to do? (I can of course put the endnotes as the last appendix) G

2 1

upate error
by Wolfgang Werners-Lucchini 08 Nov '14

08 Nov '14

Hallo, tried to run update from context minimal and got the following error: --------------------------------------------------------------------- ! LuaTeX error E:/context/tex/texmf-context/tex/context/base/data- env.lua:118: a ttempt to index local 'luasuffixes' (a nil value) stack traceback: E:/context/tex/texmf-context/tex/context/base/data- env.lua:118: in main chunk E:/context/tex/texmf-context/tex/context/base/luat- cod.lua:42: in functi on 'registercode' [string "main ctx instance"]:1: in main chunk. \registerctxluafile ...ua.registercode("#1","#2")} l.35 \registerctxluafile{data-env}{1.001} ? ---------------------------------------------------------------------- What can I do? Wolfgang

2 1

Bug with custom TOC
by Michał Goliński 08 Nov '14

08 Nov '14

The following example is taken from the wiki (http://wiki.contextgarden.net/Command/setuplist) \define[3]\SectionToCEntry{ \leftaligned\bgroup \hbox to 2em{#3}% \hskip 1em \vtop{\hsize\dimexpr\textwidth-3em\relax#2}% \egroup } \setuplist [part] [alternative=interactive, command=\SectionToCEntry] \setuplist [chapter] [alternative=interactive, command=\SectionToCEntry] \setuplist [section] [alternative=interactive, command=\SectionToCEntry] \starttext \startcolor[darkgreen] \completecontent[criterium=all] \stopcolor \page[yes] \part{I} \chapter{1} \section{1.1} \section{1.2} \section{1.3} \stoptext The fresh beta prints all the sections in TOC in a single line (so TOC has three lines only), while texlive prints it as expected: each section on its own line. I've tried adding \par after \egroup, but it doesn't help. Curiously, it works if there are no sections in the TOC. Best regards Michał

2 1

bug in TOC generation
by Pablo Rodriguez 08 Nov '14

08 Nov '14

Dear list, using latest beta from 2014.11.06 14:55, TOC is missing from this sample: \starttext \title{Sumario}\placelist[part,chapter] \startfrontmatter \chapter{Prólogo} \part{Introducción} \chapter{\ConTeXt\ y la tipografía digital} \stopfrontmatter \stoptext I think this is a bug. Many thanks for your help, Pablo -- http://www.ousia.tk

2 3

Strange behavior with the command \color[]{}
by Fabrice Couvreur 07 Nov '14

07 Nov '14

Hi, In the code below, if I comment the two lines, it's okay, but if I uncomment those two lines, the number of faces of the cubes is not white but black, and there are pieces of text green. Best regards, Fabrice \usemodule[tikz] \usetikzlibrary[calc] \usetikzlibrary[cd] \usetikzlibrary[3d] \usetikzlibrary[arrows.meta] \usetikzlibrary[positioning] %\definecolor[H1prime][c=0.50, m=0.00, y=1.00, k=0.00] %\definecolor[H4][c=0.07, m=0.00, y=0.15, k=0.00] \starttext \startsetups[table:initialize] \setupTABLE[height=2.5cm,align={middle,lohi}] \setupTABLE[column][2][[width=3cm,align={right,lohi},frame=off] \setupTABLE[column][3][[width=8cm,align={right,lohi},frame=off] \setupTABLE[1][1][[width=5cm,align={right,lohi},frame=off] \setupTABLE[1][2,3][bottomframe=off] \setupTABLE[1][3,4][topframe=off] \stopsetups \bTABLE[setups=table:initialize] \switchtobodyfont[11pt] \bTR \bTD \color[orange]{\tfa Suite d'instructions correspondant au programme de calcul :} \eTD \bTD \eTD \bTD \color[orange]{\tfa Valeur de la variable $X$ après l'exécution de chaque instruction :} \eTD \eTR \bTR \bTD $X$ prend la valeur $7$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor blue ;\stopMPcode \eTD \bTD On affecte à $X$ la valeur $7$ : la valeur de $X$ est \color[green]{$7$}. \eTD \eTR \bTR \bTD $X$ prend la valeur $2X$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor red ;\stopMPcode\eTD \bTD On affecte à $X$ la valeur $2X$.\\Comme la valeur de $X$ est \color[green]{$7$}, la nouvelle valeur de $X$ est : $2\times\color[green]{7}$.\\La valeur de $X$ est maintenant \color[green]{$14$}. \eTD \eTR \bTR \bTD $X$ prend la valeur $X+3$ \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (0cm,0cm)--(3cm,0cm) withcolor green ;\stopMPcode\eTD \eTR \bTD On affecte à $X$ la valeur $X+3$.\\Comme la valeur de $X$ est \color[green]{$14$}, la nouvelle valeur de $X$ est : $\color[green]{14}+3$.\\La valeur de $X$ est maintenant \color[green]{$17$}. \eTD \eTABLE{} \startsetups[table:initialize] \setupTABLE[height=2cm,align={middle,lohi}] \setupTABLE[column][1][[width=4cm,align={right,lohi},frame=on, framecolor=H1prime] \setupTABLE[column][2][[width=5cm,align={middle,lohi},frame=off] \setupTABLE[column][3][[width=1cm,align={middle,lohi},frame=off] \setupTABLE[column][4][[width=9cm,align={right,lohi},frame=off] \setupTABLE[1][1][frame=off] \setupTABLE[1][2,3][bottomframe=off] \setupTABLE[1][3,4][topframe=off] \stopsetups \bTABLE[setups=table:initialize] \switchtobodyfont[10pt] \bTR \bTD \color[red]{ Suite d'instructions :} \eTD \bTD \eTD \bTD \eTD \bTD \color[orange]{ Valeur de la variable $A$ et valeur de la variable $B$ après l'exécution de chaque instruction :}\eTD \eTR \bTR \bTD $A$ prend la valeur $3$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, text=white, }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=3 with $A$};\pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube={} with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD La valeur de $A$ est \color[green]{3} et $B$ n'a pas encore de valeur \eTD \eTR \bTR \bTD $B$ prend la valeur $A+1$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, text=white, font=\bfseries }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=3 with $A$}; \pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube=4 with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD Comme la valeur de $A$ est \color[green]{$3$}, la valeur de $B$ est : $\color[geen]{3}+1$, soit \color[red]{$4$}.\\La valeur de $A$ ne change pas : elle reste égale à \color[green]{$3$}.\eTD \bTR \bTD $A$ prend la valeur $A+B$ \eTD \bTD \tikzset{% cube join/.style={ thick, -{Stealth}, }, cube face/.style={ minimum size=1cm, outer sep=0pt, draw=white, thick, line join=round, shading=ball, ball color=red, text=white, font=\bfseries }, face color/.style={cube face/.append style={ball color=#1}}, pics/cube/.style args={#1 with #2}{ code={ \node [cube face, label={[name=-label]below:#2}] (-front) {#1}; \node [cube face] (-top) at (-front.north west) [anchor=south west, xslant=1, yscale=1/3] {}; \node [cube face] (-side) at (-front.south east) [anchor=south west, yslant=1, xscale=1/3] {}; }} } \starttikzpicture \pic [cube face/.append style={ball color=green}] at (-1, 1) {cube=7 with $A$}; \pic [cube face/.append style={ball color=red}] at ( 1, 1) {cube=4 with $B$}; \stoptikzpicture \eTD \bTD \dontleavehmode \startMPcode input hvdm; l:=2.8mm; r:=0.6; alfa:=45; beta:=0; gamma:=0; defineDefaultArrow (l, r, alfa, beta, gamma); pickup pencircle scaled 0.4mm; arrowline (1cm,0cm)--(0cm,0cm) ;\stopMPcode \eTD \bTD Comme la valeur de $A$ est \color[green]{3} et que celle de $B$ est \color[red]{$4$}, la nouvelle valeur de $A$ est : $\color[green]{3}+\color[red]{4}$, c'est-à-dire \color[green]{$7$}.\\La valeur de $B$ ne change pas : elle reste égale à \color[red]{$4$}. \eTD \eTR \eTABLE{} \stoptext

6 12

Re: [NTG-context] Equivalent of os.resultof(...) in LaTeX
by Xan 07 Nov '14

07 Nov '14

On Mon, 3 Nov 2014 14:31:17 +0100 Xan <dxpublica(a)telefonica.net> ha escrit: > It does not work:> \documentclass{article} > > \begin{document} > > \directlua{ > > local handle = io.popen("sha256sum \jobname.tex | cut -c -5","r") > > if handle then > > local result = handle:read("*all") or "" > > handle:close() > > tex.print(result) > > end > > } > > \end{document} > > Neither this: > > > \directlua{ > > require "lualibs-os" > > tex.sprint(os.resultof("sha256sum \jobname.tex | cut -c -5")) > > } > > > Blank. Nothing displayed.

2 4

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 07 Nov '14

07 Nov '14

On 11/6/2014 9:58 AM, Hans Hagen wrote: > we could have a specific filename cleaner but of course there will be > users who have paths that have spaces after the \ ... okay, we could > just not support evil paths like that > > Hans A rigorous filename cleaner would have to treat a huge number of possible Unicodes. This is overkill. I believe the best would be to have a cleaner for all ascii "symbols". That would fit most purposes of writing file names and URIs: !#"$%&'*()+,-./:;<=>?@[\]^_`{|}~ Of the above characters the following are disallowed on NTFS: "*/:<>?| Still I think they should be included in the cleaner. If % or # pose problems then they may be omitted. With the current "absolute"-cleaner, a space after \ is preserved correctly, so I don't understand your comment: \definetype[ctype][compact=absolute]\starttext \bTABLE\bTR\bTD \ctype{\a\ b} \eTD\eTR\eTABLE\stoptext I would be glad if you could implement such a "ascii-symbol"-cleaner. Thanks, Christoph

2 1

fallback font not displaying
by Alan Bowen 06 Nov '14

06 Nov '14

In the latest beta (ConTeXt ver: 2014.11.04 19:10 MKIV), when I run \definefallbackfamily[mainface][serif][IFAO Grec Unicode] [range={02BB-F8FF,10140-1D513}, protrusion=quality, expansion=quality, mode=node, kern=yes, force=yes, check=no, rscale=0.95] \setupbodyfont[mainface,10pt] \definefont[Greek][IFAO-Grec at 10pt] \starttext ἔφεϲιϲ and τελειότηϲ {\Greek ἔφεϲιϲ and τελειότηϲ} \stoptext the fallback Greek does not display. All I get is: and ἔφεϲιϲ and τελειότηϲ This definition of \definefallbackfamily used to work. Has there been a change in the font mechanism? Alan

2 5

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 06 Nov '14

06 Nov '14

On 11/5/2014 10:28 AM, Hans Hagen wrote: > On 11/5/2014 8:09 AM, Christoph Reller wrote: > > Thank you very much Hans! > > > > Maybe you could tell me why the following still produces a space in > > front of the full stop: > > > > \definetype[ctype][compact=absolute] > > \starttext > > \bTABLE > > \bTR \bTD \ctype{\test.txt} \eTD \eTR > > \eTABLE > > \stoptext > > because the absolute cleaner only deals with \foo { and \foo [ > > > If this issue is resolved I will be glad to wikify. > > i'll add the . to the filter criteria Thank you for the explanation. I am not sure if it is a wise idea to add only "." (the full stop). I tried the following characters, and they all are preceded by a space: . - _ # % , ; @ ! Basically, what I want is to write a file system path name such as C:\Path_to-my\file.ext. The above characters are all valid file system characters. Is there a better solution? Or are you willing to add all the above (maybe except for # and %) to the absolute cleaner? Thank you in advance for your help. Christoph

2 1

Re: [NTG-context] Problem with PDF bookmarks (outline)
by Robert Blackstone 05 Nov '14

05 Nov '14

On 4 Nov 2014, at 15:27 , Michał Goliński <golinski(a)amu.edu.pl> wrote > > A few weeks back I've asked here about the structure of titles, as the > PDF bookmarks didn't work for me. I was given a solution, which should > work, but unfortunately it doesn't. I don't know if this is a bug or is > this expected behaviour. > > For the file: > > \setupinteraction[state=start] > \placebookmarks[part,chapter,section] > \setupinteractionscreen[option=bookmark] > \starttext > \placecontent > > \startfrontmatter > \startchapter[title=Prologue] > \input knuth > \stopchapter > \stopfrontmatter > > \startpart[title={Part A}] > \startchapter[title=One] > \input knuth > \stopchapter > \stoppart > > \startbackmatter > \startchapter[title=Epilogue] > \input knuth > \stopchapter > \stopbackmatter > \stoptext > > > ConTeXt (Mk IV) generates a PDF file which has only one item in the > bookmarks -- the Prologue. The other chapters show up only if the file > is changed with > > \placebookmarks[chapter,section] > > but then of course there is no sign of Part A in the bookmarks. > > I would expect the bookmarks to look like this: > > Prologue > Part A > One > Epilogue Hi, I think it is a very recent bug. Only the standalone I installed today gives the same wrong result that you get. My previous standalones, of which the most recent was installed two days ago, on november 2, all give the correct result. That is, the bookmarks look OK but Part A starts on empty page 3 (no head) and Chapter 1 starts on page 4. Is that really what you want? Best regards, Robert Blackstone

5 8

Minimal Working Examples
by Alan BRASLAU 05 Nov '14

05 Nov '14

There is always discussion on this list about providing a minimal working example (MWE). To spawn your creativity, I hereby launch the official Minimal Working Example Contest The contest will award prizes on several categories: *shortest code *fastest execution *shortest code + fastest execution http://wiki.contextgarden.net/MWE In the future, new categories may be added. (Of course, "shortest code + largest output" is excluded as it is too easy to write infinite loops...) Alan

1 0

pgfplots broken?
by Mikael P. Sundqvist 05 Nov '14

05 Nov '14

Hi, pgfplots seems broken with the latest standalone.With the example \usemodule[pgfplots] \starttext Foo \stoptext Best regards, Mikael lua error > error on line 75 in file /opt/ConTeXt/tex/texmf-modules/tex/generic/pgf/libraries/luamath/pgflibraryluamath.code.tex: .../ConTeXt/tex/texmf-context/tex/context/base/util-lib.lua:246: module 'pgfluamath.functions' not found: no field package.preload['pgfluamath.functions'] no file '/usr/local/share/lua/5.2/pgfluamath/functions.lua' no file '/usr/local/share/lua/5.2/pgfluamath/functions/init.lua' no file '/usr/local/lib/lua/5.2/pgfluamath/functions.lua' no file '/usr/local/lib/lua/5.2/pgfluamath/functions/init.lua' no file './pgfluamath/functions.lua' no file '/usr/local/lib/lua/5.2/pgfluamath/functions.so' no file '/usr/local/lib/lua/5.2/loadall.so' no file './pgfluamath/functions.so' no file '/usr/local/lib/lua/5.2/pgfluamath.so' no file '/usr/local/lib/lua/5.2/loadall.so' no file './pgfluamath.so' stack traceback: [C]: in function 'savedrequire' .../ConTeXt/tex/texmf-context/tex/context/base/util-lib.lua:246: in function 'require' [\directlua]:1: in main chunk 65 \let\pgfutil@directlua\directlua 66 \pgfutil@directlua{% 67 tex.enableprimitives('pgfutil@',{'luaescapestring'})} 68 \else 69 \def\pgfutil@directlua#1{} 70 \def\pgfutil@luaescapestring#1{} 71 \fi 72 73 \pgfutil@directlua{% 74 pgfluamathfunctions = require("pgfluamath.functions") 75 >> pgfluamathparser = require("pgfluamath.parser")} 76 77 78 % Patch some configuration macros such that the modifications are 79 % available in LUA as well: 80 \pgfkeys{ 81 /pgf/trig format/deg/.add code={}{\directlua{pgfluamathfunctions.setTrigFormat("deg")}\aftergroup\pgfmath@settrigformat}, 82 /pgf/trig format/rad/.add code={}{\directlua{pgfluamathfunctions.setTrigFormat("rad")}\aftergroup\pgfmath@settrigformat}, 83 } 84 % ... and reactivate the key: 85 \pgfmathiftrigonometricusesdeg{%

4 7

Re: [NTG-context] pgfplots broken?
by Akira Kakuto 05 Nov '14

05 Nov '14

Dear Mikael, An example from PGFPlots Gallery. Please try if it works. Here on windows, it seems to work. Attached files are tt.log.txt and tt.pdf. Best, Akira % % tt.tex: from PGFPlots Gallery % \setupcolors[state=start] \usemodule[tikz] \usemodule[pgfplots] \starttext \midaligned{% \starttikzpicture \startaxis[ xmin=-3, xmax=3, ymin=-3, ymax=3, extra x ticks={-1,1}, extra y ticks={-2,2}, extra tick style={grid=major}, ] \draw[red] \pgfextra{ \pgfpathellipse{\pgfplotspointaxisxy{0}{0}} {\pgfplotspointaxisdirectionxy{1}{0}} {\pgfplotspointaxisdirectionxy{0}{2}} % see also the documentation of % 'axis direction cs' which % allows a simpler way to draw this ellipse }; \draw[blue] \pgfextra{ \pgfpathellipse{\pgfplotspointaxisxy{0}{0}} {\pgfplotspointaxisdirectionxy{1}{1}} {\pgfplotspointaxisdirectionxy{0}{2}} }; \addplot [only marks,mark=*] coordinates { (0,0) }; \stopaxis \stoptikzpicture } \stoptext

4 3

Re: [NTG-context] Natural tables introduces spaces in \type
by Christoph Reller 05 Nov '14

05 Nov '14

> On 11/2/2014 2:27 PM, Christoph Reller wrote: > > Hi, > > > > Why does \type{...} introduce spaces when used inside natural tables? > > > > MWE: > > > > \starttext > > \type{\test\test} %<- no space introduced > > \bTABLE > > \bTR \bTD \typ{\test\test} \eTD \eTR %<- space introduced > > \eTABLE > > \stoptext > > it's the way tex works (when passing arguments) .. you can use this (and > wikify it): > > \definetype[ctype][compact=absolute] > > \bTABLE > \bTR \bTD \ctype{\test\test} \eTD \eTR > \eTABLE Thank you very much Hans! Maybe you could tell me why the following still produces a space in front of the full stop: \definetype[ctype][compact=absolute] \starttext \bTABLE \bTR \bTD \ctype{\test.txt} \eTD \eTR \eTABLE \stoptext If this issue is resolved I will be glad to wikify. Regards, Christoph

2 1

Font Sizing in Layers
by jdh 05 Nov '14

05 Nov '14

I wanted to change character sizes in a letter head but the \tfa... macro doesn't work. Here is a minimum example See how the letter head does not give larger fonts as requested with the \tfc{....} command. See the difference with the table in the body of the letter. Regards, darel

3 2

Re: [NTG-context] pgfplots broken?
by Akira Kakuto 04 Nov '14

04 Nov '14

>> you can try with \enabletrackers[resolvers.swiglib] to see what gets checked > > I (if you meant me) get the attached log file. A log file in my case for \enabletrackers[resolvers.swiglib] \usemodule[pgfplots] \starttext Foo \stoptext is attached. Best, Akira

1 0

pgfplots broken?
by Akira Kakuto 04 Nov '14

04 Nov '14

> Can confirm not working in latest Beta. It looks like there is no problem here. mtx-context | current version: 2014.11.04 11:02 Best, Akira

3 3

Problem with PDF bookmarks (outline)
by Michał Goliński 04 Nov '14

04 Nov '14

A few weeks back I've asked here about the structure of titles, as the PDF bookmarks didn't work for me. I was given a solution, which should work, but unfortunately it doesn't. I don't know if this is a bug or is this expected behaviour. For the file: \setupinteraction[state=start] \placebookmarks[part,chapter,section] \setupinteractionscreen[option=bookmark] \starttext \placecontent \startfrontmatter \startchapter[title=Prologue] \input knuth \stopchapter \stopfrontmatter \startpart[title={Part A}] \startchapter[title=One] \input knuth \stopchapter \stoppart \startbackmatter \startchapter[title=Epilogue] \input knuth \stopchapter \stopbackmatter \stoptext ConTeXt (Mk IV) generates a PDF file which has only one item in the bookmarks -- the Prologue. The other chapters show up only if the file is changed with \placebookmarks[chapter,section] but then of course there is no sign of Part A in the bookmarks. I would expect the bookmarks to look like this: Prologue Part A One Epilogue Regards Michał

1 0

beta
by Hans Hagen 04 Nov '14

04 Nov '14

Hi, I reorganized some list code so if something fails in the new beta ... nothing drastic that can't be fixed fast (a few more criteria were needed for the new bibliographic support). Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Re: [NTG-context] (again) bug in index sorting?
by Robert Blackstone 03 Nov '14

03 Nov '14

On 3 Nov 2014, at 10:01 , Alan BRASLAU <alan.braslau(a)cea.fr> wrote > > On Sun, 2 Nov 2014 12:45:25 +0100 > Robert Blackstone <blackstone.robert(a)gmail.com> wrote: > >> >> On 2 Nov 2014, at 12:00 , Pablo Rodriguez <oinos(a)gmx.es> wrote >>> >>> I > Alphabetize letter by letter. When alphabetizing surnames, remember > that “nothing precedes something”: Brown, J. R., precedes Browning, A. > R., even though i precedes j in the alphabet. > > Singh, Y., precedes Singh Siddhu, N. > López, M. E., precedes López de Molina, G. > Ibn Abdulaziz, T., precedes Ibn Nidal, A. K. M. > Girard, J.-B., precedes Girard-Perregaux, A. S. > Villafuerte, S. A., precedes Villa-Lobos, J. > Benjamin, A. S., precedes ben Yaakov, D. Hi Alan, This still puzzles me a bit. You write: “Brown, J. R., precedes Browning, A.R., even though i precedes j in the alphabet.” But isn’t that because “," precedes “i" ? Likewise, when sorting these names (with TeX-Edit Plus), Singh Siddhu, N. comes out before Singh, Y., not the reverse, precisely because, as you say, “nothing precedes something”, or the space between Singh and Siddhu precedes the comma between Singh and Y. Same with López de Molina, G. and López, M. E. Or does ConTeXt, or TeX, have its own sorting order? Best regards, Robert Blackstone

3 2

Natural tables introduces spaces in \type
by Christoph Reller 03 Nov '14

03 Nov '14

On 11/2/2014 2:54 PM, Hans Hagen wrote: > On 11/2/2014 2:27 PM, Christoph Reller wrote: > > Hi, > > > > Why does \type{...} introduce spaces when used inside natural tables? > > > > MWE: > > > > \starttext > > \type{\test\test} %<- no space introduced > > \bTABLE > > \bTR \bTD \typ{\test\test} \eTD \eTR %<- space introduced > > \eTABLE > > \stoptext > > it's the way tex works (when passing arguments) .. you can use this (and > wikify it): > > \definetype[ctype][compact=absolute] > > \bTABLE > \bTR \bTD \ctype{\test\test} \eTD \eTR > \eTABLE Thank you very much Hans! Maybe you could tell me why the following still produces a space in front of the full stop: \definetype[ctype][compact=absolute] \starttext \bTABLE \bTR \bTD \ctype{\test.txt} \eTD \eTR \eTABLE \stoptext Any feedback is welcome. Regards, Christoph

1 0

Equivalent of os.resultof(...) in LaTeX
by Xan 03 Nov '14

03 Nov '14

Hi, Just short question: what's the equivalent in latex of \ctxlua{context(os.resultof("sha256sum \jobname.conTeXt | cut -c -5"))} ? Thanks in advance, Xan

2 1

OT: of interest for inter-European travel
by Alan BRASLAU 03 Nov '14

03 Nov '14

The Deutsche Bahn and its partners in Danemark, in the Netherlands, in France, in Switzerland and in the Czech Republic plan to close the following overnight train lines at the end of the year 2014: Amsterdam-Copenhague Copenhague-Prague Prague-Amsterdam Bâle-Copenhague Berlin-Paris Hambourg-Paris Paris-Munich As long as the overnight train lines to/from Bachotex remain in operation, perhaps we will not be to affected by this "progress". ;) Alan

2 2

Re: [NTG-context] (again) bug in index sorting?
by Robert Blackstone 02 Nov '14

02 Nov '14

On 2 Nov 2014, at 12:00 , Pablo Rodriguez <oinos(a)gmx.es> wrote > > I have the following sample: > > \setuppapersize[A6] > \starttext > \index{tipografía digital} > \index{tipografías} > \index{tomato white} > \index{tomatoes red} > \index{idioma+de un pasaje} > \index{idioma+del documento} > \completeindex > \stoptext > > Latest beta from 2014.10.31 12:47 sorts the index entries the following way: > > tomatoes red > tomato white > > Of course, this sample doesn’t make sense, but the entries in Spanish > do. All of them are wrong sorted. > > Stable version from 2014.01.03 00:40. The different sorting criterium > seems to have been introduced in beta from 2014.10.22 16:23. > > Or shouldn’t be the first word sorted first and then the second one in > index entry? > > Could anyone be so kind to confirm the bug? > > Many thanks for your help, > > > Pablo Hi Pablo, I cannot confirm any bug, but what I would do anyway is to force the sorting in whatever order I want by using \index[]{} with the argument specifying the order. So your example could be: \starttext \index[tipograf\'{i}adig]{tipograf\'{i}a digital} \index[tipograf\'{i}as]{tipograf\'{i}as} \index[idiomadeu]{idioma+de un pasaje} \index[idiomadel]{idioma+del documento} \completeindex \stoptext if you want tipografias digital before tipografias. This works with all mkiv and mkii versions I have, including the ones that I installed today. I use it for a rather comlex three-level index and it works flawlessly (for me). Best regards, Robert Blackstone

2 1

Natural tables introduces spaces in \type
by Christoph Reller 02 Nov '14

02 Nov '14

Hi, Why does \type{...} introduce spaces when used inside natural tables? MWE: \starttext \type{\test\test} %<- no space introduced \bTABLE \bTR \bTD \typ{\test\test} \eTD \eTR %<- space introduced \eTABLE \stoptext Kind Regards, Christoph

2 1

clipping in metafun has weird side effects
by Tobias Columbus 02 Nov '14

02 Nov '14

Dear all, I stumbled upon some very weird behaviour of clipping in metafun/context. When I add some clipped pictures to currentpicture and draw something dashed, some subsequent lines will also be drawn dashed. This behaviour only shows up with context but not with mptopdf or mpost. I attached a minimal example and the corresponding output of context and mptopdf. I tried context versions 2014.05.21 22:04 and 2014.10.29 17:47, but the result is the same in both. Tobias --

2 8

(again) bug in index sorting?
by Pablo Rodriguez 01 Nov '14

01 Nov '14

Dear list, I have the following sample: \setuppapersize[A6] \starttext \index{tipografía digital} \index{tipografías} \index{tomato white} \index{tomatoes red} \index{idioma+de un pasaje} \index{idioma+del documento} \completeindex \stoptext Latest beta from 2014.10.31 12:47 sorts the index entries the following way: tomatoes red tomato white Of course, this sample doesn’t make sense, but the entries in Spanish do. All of them are wrong sorted. Stable version from 2014.01.03 00:40. The different sorting criterium seems to have been introduced in beta from 2014.10.22 16:23. Or shouldn’t be the first word sorted first and then the second one in index entry? Could anyone be so kind to confirm the bug? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

about layers
by jdh 01 Nov '14

01 Nov '14

I am working on making a letter head which will have two separate main components. 1.) A jpeg graphical component and a 2.) the companies address (probably created with tabulate, but I don't know yet. I wanted to ask what other people have done when using similar methods? Any advice will be greatly appreciated..

1 0

\placetable whitespace problem in columnset
by Bryor Snefjella 31 Oct '14

31 Oct '14

I have a document using columnsets to place tables near an entry in a long list of sorts. The problem is that wherever I issue a \placetable \placefigure etc command, I get unwanted extra whitespace between entries where the command is issued. I have tried changing the parameters in \setupfloats, but haven't found a setting that works. I'm using the context version distributed with the latest texlive. You can see the extra whitespace between entry Q and R in this example. \definecolumnset[TwoColumns][n=2,distance=0.04\makeupwidth] \setupindenting[yes, small] \setupfloats[before=,after=] \definedescription [MyEntry][alternative=serried,width=fit,before=\indentation,indenting=yes] \unexpanded\def\MyCommand#1#2#3% {\startMyEntry{\bi#2:}#3\stopMyEntry} \definesorting[My][Mys] \starttext \startcolumnset[TwoColumns] \definecolumnsethsize{TwoColumns}{1}{1}\One \startbuffer \placetable[lrtb][tab:mytable]{My Table}{ \bTABLE[option=stretch,textwidth=\One,align=middle] \bTR\bTH Foo \eTH\bTH Bar \eTH\eTR \bTR\bTD Bar \eTD\bTD Foo \eTD\eTR \bTR\bTD Foo \eTD\bTD Bar \eTD\eTR \eTABLE} \stopbuffer \My[Q]{\input knuth\getbuffer} \My[R]{\input knuth} \My[C]{\input knuth} \My[A]{\input knuth} \placelistofsorts[My][criterium=all,command=\MyCommand] \stopcolumnset \stoptext

1 0

Package {tikz-cd} with ConTeXt
by Fabrice Couvreur 29 Oct '14

29 Oct '14

Hi, The following code compiles with pdflatex : \documentclass{article} \usepackage{tikz} \usepackage{tikz-cd} \usetikzlibrary{3d,shapes} \begin{document} \tikzset{xzplane/.style={canvas is xz plane at y=#1, thick,shading=ball,ball color=red,draw=black}} \tikzset{yzplane/.style={canvas is yz plane at x=#1,thick,shading=ball, ball color=red,draw=black}} \tikzset{xyplane/.style={canvas is xy plane at z=#1,thick,shading=ball,ball color=red,draw=black}} \tikzcdset{ arrow style=tikz, diagrams={>=stealth}} \[\begin{tikzcd} \tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 7}; \draw[xyplane=2] node[below=0.25cm] at (1,0){\Large X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten >=1mm]{r}[scale=2]{\times 2} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 14}; \draw[xyplane=2] node[below=0.25cm] at (1,0) {\Large X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten <= 1mm]{r}[scale=2]{+ 3} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){\Large 17}; \draw[xyplane=2] node[below=0.25cm] at (1,0){\Large X};} \end{tikzcd}\] \begin{tikzpicture} \tikzstyle {bulle}=[circle,draw,thick] \tikzstyle{fleche}=[thick,>=stealth,->] \node(debut1) at (0,0) {$7$}; \node(debut3) at (4,0) {$14$}; \draw [fleche](debut1.north) to [bend left] (debut3.north); \node [bulle,fill=white] (debut6) at (2,0.75) {$\times 2$}; \end{tikzpicture} \end{document} I tried with Context, but it does not work : \usemodule[tikz] \usetikzlibrary[calc] \usetikzlibrary[cd] \usetikzlibrary[3d] \usetikzlibrary[arrows] \usetikzlibrary[positioning] \starttext \tikzset{xzplane/.style={canvas is xz plane at y=#1, thick,shading=ball,ball color=red,draw=black}} \tikzset{yzplane/.style={canvas is yz plane at x=#1,thick,shading=ball, ball color=red,draw=black}} \tikzset{xyplane/.style={canvas is xy plane at z=#1,thick,shading=ball,ball color=red,draw=black}} \tikzcdset{ arrow style=tikz, diagrams={>=stealth}} \starttikzcd \tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 7}; \draw[xyplane=2] node[below=0.25cm] at (1,0){X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten >=1mm]{r}[scale=2]{$\times 2$} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 14}; \draw[xyplane=2] node[below=0.25cm] at (1,0) {X};} \arrow[thick, bend left, start anchor = north, end anchor = north, shorten <= 1mm]{r}[scale=2]{+ 3} &\tikz{\draw[xzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[yzplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] (0,0)--(2,0)--(2,2)--(0,2) --cycle; \draw[xyplane=2] node[white] at (1,1){ 17}; \draw[xyplane=2] node[below=0.25cm] at (1,0){X};} \stoptikzcd \stoptext Best regards, Fabrice

1 0

Error Messages
by Thangalin 27 Oct '14

27 Oct '14

Hi, After upgrading to version 2014.10.07, I recompiled a document that had gathered some dust and was greeted with: tex error > error on line 34 in file ...: ! Math error: parameter \Umathquad\displaystyle is not set The document compiled using a previous version, and no changes were made prior to upgrading. Having the line number and filename is a good start. The error message, however, is confounding. >From this error message I have no idea: - What triggered the error. - Why \Umathquad\displaystyle is relevant. - How to resolve the problem. >From superficial appearances, line 34 is fine (itemized list). In addition to the error message, would it be possible to provide a link to the wiki that offers more information? The information on the wiki page would include: - a unique identifier for the error number (e.g., err-tex-00001) - the error string ("Math error: parameter ... is not set") - a simple document that shows how to reproduce the problem - a document that shows one way to fix the issue - if relevant, note the ConTeXt version(s) that the simple document compiles without error - a brief description of why the error happens (i.e., explain why the error shows up in the subsequent ConTeXt versions) Thank you.

3 3

Any plans on documentation?
by MANUEL BLANCO IRIGARAY 27 Oct '14

27 Oct '14

Hi, I think I saw in the plan of the ConTeXt meeting something about documentation. Was anything cleared there? Is there a plan to document ConTeXt? At least the basics, updating old manuals and adding the most important “features” or changes. Cheers. Manuel

2 1

framed and placefigure
by DesdeChaves 27 Oct '14

27 Oct '14

why this happens: After a specification of the foregroundcolor the figures are behind a framed color. \setupframed[offset=2mm, corner=round, background=color, backgroundcolor=blue, foregroundcolor=yellow, frame=off, strut=no, align=normal, location=top, width=\textwidth] For example, is this case my \placefigure[right,nonumber,2*hang] {}{\externalfigure[ostrichhead][width=5cm]} is behind a yellow framed rectangle. Jorge

2 1

Resume source
by Kip Warner 26 Oct '14

26 Oct '14

Hey list, I've gone through the letter module manual below: <http://bitbucket.org/wolfs/correspondence/downloads/correspondence.pdf> On p.130 of 148, as indexed by my renderer, there is a great looking resume template that is blue and black on light grey. I've tried looking for the source of this everywhere, including in the book's, but I can't seem to find it. Can anyone help me? -- Kip Warner -- Senior Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

1 0

bug sorting index?
by Pablo Rodriguez 25 Oct '14

25 Oct '14

Dear list, I have the following sample: \starttext \index{tipografía digital} \index{tipografías} \index{idioma+de un pasaje} \index{idioma+del documento} \completeindex \stoptext No matter what language I choose (en, de, nl, es, fr), sorting order is wrong: "tipografía" comes before "tipografías" and "de" comes before "del". I’m afraid this may be a bug introduced in latest beta from 2014.10.22 16:23. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

FW: ntg context 2
by Sanja C. 24 Oct '14

24 Oct '14

http://butikpastalar.net/omotin/jfmrodzsklsayuvwqlscbff.gcftbpdxtoifsfkdaw Sanja C.

1 0

Re: [NTG-context] korean unfonts "globbing path" error
by Jeong Dal 24 Oct '14

24 Oct '14

Dear Hans, >> >> http://www.ktug.org/xe/index.php?_filter=search&mid=KTUG_QnA_board&search_t… >> >> I hope that you have the solution. > > not for latex … afaik it uses its own font database > Yes, the above solution is not for latex but for Lualatex. One of my colleague who try to run Lualatex(TeXlive 2013 in the window 7) first time had a similar problem. After removing Korean fonts like penhl.ttf, taenmr.ttf from the system font file directories, she can run Lualatex. Someone registered those files in the blacklist which LuaTeX referred to when it scans fonts, and succeed to make font db. Anyway, it is not the ConTeXt problem. It is because of the problematic fonts. Thank you for your concern. Best regards, Dalyoung

1 0

Font-loading
by Willi Egger 23 Oct '14

23 Oct '14

Hi all, I know that there was earlier a thread dealing with this subject…. However I needed to typeset a title in a typeface with a medieval look. One of the choices is “Maximilian” a ttf font (free font). I put the font in texmf-fonts/data. The mtxrun --script font --list --info --all maximilian gives: mtx-fonts | mapping : maximilian mtx-fonts | fontname: maximilian mtx-fonts | fullname: maximilian mtx-fonts | filename: Maximilian.ttf mtx-fonts | family : maximilian mtx-fonts | weight : normal mtx-fonts | style : normal mtx-fonts | width : normal mtx-fonts | variant : normal mtx-fonts | subfont : mtx-fonts | fweight : conflict: book mtx-fonts | mtx-fonts | gsub features: mtx-fonts | mtx-fonts | feature script languages mtx-fonts | mtx-fonts | tlig all all mtx-fonts | trep all all I tried in a classical way: \starttypescript[serif][medieval] \definefontsynonym[serif][file:Maximilian][features=default] \stoptypescript \starttypescript[medieval] \definetypeface[Maximilian][rm][serif][medieval][default] \stoptypescript \usetypescript[medieval] \setupbodyfont[Maximilian,rm,12pt] I tried also the new approach \definefontfamily[Medieval][rm][Maximilian][features=default] \setupbodyfont[Medieval,12pt] In both cases I end up with an empty page, because the font is not fount. — What do I miss? Kind regards Willi

2 2

Re: [NTG-context] korean unfonts "globbing path" error
by Jeong Dal 23 Oct '14

23 Oct '14

> fonts > names > globbing path 'c:/windows/fonts/**.ttf' > > fonts > names > identifying system font files with suffix 'TTF' > > mtx-context | fatal error: return code: 1>Exit code: 1 > It seems to me that there is a problem to make a font db. Try “mtxrun unbatang.ttf” in the terminal to see if it locates the unbatang.ttf file. If it doesn’t locate it, then “sudo mtxrun —generate” in the terminal and try “mtxrun unbatang.ttf” once more. If you don’t get any output, you need to create the font db. Because of some Korean fonts in the system font files(Window system), it can not create font db. It is reported in the Q&A in KTUG with the solution. Please search using the key word “LuaLaTeX”. http://www.ktug.org/xe/index.php?_filter=search&mid=KTUG_QnA_board&search_t… I hope that you have the solution. Best regards, Dalyoung

2 1

Re: [NTG-context] korean unfonts "globbing path" error
by Akira Kakuto 23 Oct '14

23 Oct '14

Hi Hans, > mtxrun --script font --reload --force --trackers=* > > and see at what font it aborts? Thanks a lot. Interestingly the command ran without abort, and names.tma and names.tmc are successfully created. After the creation of names.tma and names.tmc, the example by NY Park works fine again. Best, Akira

2 1

korean unfonts "globbing path" error
by Akira Kakuto 23 Oct '14

23 Oct '14

> hi > below is error message > But i don,t know how > korean unfonts is default in ConTeXt system i know > help The example worked on my windows. However, after removing all cache files, I can confirm the crash. Best, Akira

2 1

ConTeXt Standalone will not install
by Jaroslav Hajtmar 23 Oct '14

23 Oct '14

Hello ConTeXist. Some time ago I changed a installing TeX Live directly from version 2012 to version 2014. ConTeXt in this version TeX Live works seamlessly, but I have since stopped working update Standalone version. But I'm not entirely sure causation. Anyway, the update does not work as before. At first glance, it seems that the updates are performed correctly, but the files are not probably somehow eventually copied. I am not subsequently able to compile things that require the latest version of ConTeXt. I must say that I am in a one moment delete the entire directory texmf-cache, because I began to discover a strange message about the mischmasch format of ConTeXt. OK. Nothing to do. When I after a vain attempt failed ConTeXt update to the latest version, so I decided to ConTeXt Standalone completely re-install into my Windows 7 home edition. Installation failed, although I followed the instructions exactly to ConTeXtgarden (http://wiki.contextgarden.net/ConTeXt_Standalone) Creates only the TeX directory and there empty directories ("cache-texmf, texmf-fonts, texmf-local texmf and texmf-modules-project"). These directories do not contain any files. I attach below the log file during installation. I tried a second installation method cited in ConTeXt ConTeXtGarden (see http://wiki.contextgarden.net/Simple_Windows_Installation) Link to the installation file is broken (see http://minimals.contextgarden.net/setup/context-installer/ContextMinimalIns…) Can anyone advise what I'm doing wrong and why you can not install ConTeXt? Nowhere does not say anything about setting the path respectively next steps. Blame those problems installing TeX Live 2014? Thanks for the advice. Jaroslav Hajtmar Here is log file from instalation: receiving incremental file list ./ kpathsea620w64.dll luatex.dll mtxrun.dll mtxrun.exe mtxrun.lua sent 22928 bytes received 5501341 bytes 356404.45 bytes/sec total size is 9371026 speedup is 1.70 mtxrun | forcing cache reload resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/Users/Jaroslav Hajtmar/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path 'C:/context/bin' from specification 'selfautoloc:' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path 'C:/context' from specification 'selfautodir:' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/context/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on weird path 'C:/' from specification 'selfautoparent:' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for 'texmfcnf.lua' on given path 'C:/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated mtx-update | state, loaded mtx-update | mtx-update | update, start mtx-update | available platforms: mtx-update | run, rsync -rpztlv -L contextgarden.net::'minimals/current/misc/setuptex/' '/cygdrive/C/context/tex/.' mtx-update | run, rsync -rpztlv -L --delete contextgarden.net::'minimals/current/base/tex/ minimals/current/base/metapost/ minimals/current/fonts/common/ minimals/current/fonts/other/ minimals/current/misc/web2c minimals/current/fonts/new/ minimals/current/fonts/old/ minimals/current/base/xetex/ minimals/current/fonts/new/' '/cygdrive/C/context/tex/texmf' mtx-update | run, rsync -rpztlv -L --delete contextgarden.net::'minimals/current/context/beta/' '/cygdrive/C/context/tex/texmf-context' mtx-update | run, rsync -rpztlv -L contextgarden.net::'minimals/current/bin/common/win64/ minimals/current/bin/context/win64/ minimals/current/bin/metapost/win64/ minimals/current/bin/man/ minimals/current/bin/luatex/win64/ minimals/current/bin/luatex/win64/ minimals/current/bin/pdftex/win64/ minimals/current/bin/luatex/win64/ minimals/current/bin/xetex/win64/' '/cygdrive/C/context/tex/texmf-win64' mtx-update | updating mtxrun for win64: rsync -t "/cygdrive/C/context/tex/texmf-context/scripts/context/lua/mtxrun.lua" "/cygdrive/C/context/tex/texmf-win64/bin/" mtx-update | run, rsync -t "/cygdrive/C/context/tex/texmf-context/scripts/context/lua/mtxrun.lua" "/cygdrive/C/context/tex/texmf-win64/bin/" resolvers | tds | no 'texmf-win64' under tree 'C:\context\tex' When you want to use context, you need to initialize the tree with: C:\context\tex\setuptex.bat C:\context\tex You can associate this command with a shortcut to the cmd prompt. Alternatively you can add C:\context\tex\texmf-win64\bin to your PATH variable. If you run from an editor you can specify the full path to mtxrun.exe: C:\context\tex\texmf-win64\bin\mtxrun.exe --autogenerate --script context --autopdf ...

2 7

Re: [NTG-context] korean unfonts "globbing path" error
by Jeong Dal 23 Oct '14

23 Oct '14

Dear NY Park, I am able to run your code in my mac without any error message. My ConTeXt version is “ConTeXt ver: 2014.10.19 21:08 MKIV beta fmt: 2014.10.20 int: english/english” which is as same as yours. Thank you. Best regards, Dalyoung

1 0

korean unfonts "globbing path" error
by 박내엽(NY Park) 23 Oct '14

23 Oct '14

hi blow is error message But i don,t know how korean unfonts is default in ConTeXt system i know help thanks sample ============= \setscript[hangul] \setupbodyfont[unfonts] \starttext 한글(Korean) \stoptext ================= result ================= >context --autopdf default.tex mtx-context | run 1: luatex --fmt="C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="default" --lua="C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:autopdf --c:currentrun=1 --c:fulljobname="./default.tex" --c:input="./default.tex" --c:kindofrun=1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/ConTeXt/tex/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2014.10.19 21:08 MKIV beta fmt: 2014.10.20 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > C:/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'default', input './default', result 'default' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/Users/A8526/Desktop/default.tex open source > 3 > 4 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-unfonts.mkiv open source > 4 > 5 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-texgyre.mkiv close source > 4 > 5 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-texgyre.mkiv open source > 4 > 6 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-xits.mkiv open source > 5 > 7 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-texgyre.mkiv close source > 5 > 7 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-texgyre.mkiv close source > 4 > 7 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-xits.mkiv close source > 3 > 7 > C:/ConTeXt/tex/texmf-context/tex/context/base/type-imp-unfonts.mkiv fonts > names > warnings are disabled (tracker 'fonts.warnings') fonts > names > identifying tree font files with suffix 'otf' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for otf files fonts > names > 0 entries found, 0 otf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for otf files fonts > names > 0 entries found, 0 otf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for otf files fonts > names > 0 entries found, 0 otf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for otf files fonts > names > 0 entries found, 0 otf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for otf files fonts > names > 0 entries found, 1 otf files checked, 1 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for otf files fonts > names > 0 entries found, 0 otf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for otf files fonts > names > 0 entries found, 214 otf files checked, 214 okay fonts > names > identifying tree font files with suffix 'OTF' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for OTF files fonts > names > 0 entries found, 0 OTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for OTF files fonts > names > 0 entries found, 0 OTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for OTF files fonts > names > 0 entries found, 0 OTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for OTF files fonts > names > 0 entries found, 0 OTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for OTF files fonts > names > 0 entries found, 1 OTF files checked, 1 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for OTF files fonts > names > 0 entries found, 0 OTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for OTF files fonts > names > 0 entries found, 214 OTF files checked, 214 okay fonts > names > 430 tree files identified, 215 skipped, 215 duplicates, 215 hash entries added, runtime 12.051 seconds fonts > names > identifying tree font files with suffix 'ttf' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for ttf files fonts > names > 0 entries found, 0 ttf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for ttf files fonts > names > 0 entries found, 0 ttf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for ttf files fonts > names > 0 entries found, 24 ttf files checked, 24 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for ttf files fonts > names > 0 entries found, 0 ttf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for ttf files fonts > names > 0 entries found, 1 ttf files checked, 1 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for ttf files fonts > names > 0 entries found, 0 ttf files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for ttf files fonts > names > 0 entries found, 39 ttf files checked, 39 okay fonts > names > identifying tree font files with suffix 'TTF' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for TTF files fonts > names > 0 entries found, 0 TTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for TTF files fonts > names > 0 entries found, 0 TTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for TTF files fonts > names > 0 entries found, 24 TTF files checked, 24 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for TTF files fonts > names > 0 entries found, 0 TTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for TTF files fonts > names > 0 entries found, 1 TTF files checked, 1 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for TTF files fonts > names > 0 entries found, 0 TTF files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for TTF files fonts > names > 0 entries found, 39 TTF files checked, 39 okay fonts > names > 128 tree files identified, 64 skipped, 64 duplicates, 64 hash entries added, runtime 8.131 seconds fonts > names > identifying tree font files with suffix 'ttc' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for ttc files fonts > names > 0 entries found, 0 ttc files checked, 0 okay fonts > names > identifying tree font files with suffix 'TTC' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for TTC files fonts > names > 0 entries found, 0 TTC files checked, 0 okay fonts > names > 0 tree files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.047 seconds fonts > names > identifying tree font files with suffix 'dfont' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for dfont files fonts > names > 0 entries found, 0 dfont files checked, 0 okay fonts > names > identifying tree font files with suffix 'DFONT' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for DFONT files fonts > names > 0 entries found, 0 DFONT files checked, 0 okay fonts > names > 0 tree files identified, 0 skipped, 0 duplicates, 0 hash entries added, runtime 0.070 seconds fonts > names > identifying tree font files with suffix 'afm' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for afm files fonts > names > 0 entries found, 0 afm files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for afm files fonts > names > 0 entries found, 0 afm files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for afm files fonts > names > 0 entries found, 0 afm files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for afm files fonts > names > 0 entries found, 0 afm files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for afm files fonts > names > 0 entries found, 10 afm files checked, 10 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for afm files fonts > names > 0 entries found, 0 afm files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for afm files fonts > names > 0 entries found, 96 afm files checked, 96 okay fonts > names > identifying tree font files with suffix 'AFM' fonts > names > scanning path 'C:/ConTeXt/tex/texmf-project' for AFM files fonts > names > 0 entries found, 0 AFM files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-fonts' for AFM files fonts > names > 0 entries found, 0 AFM files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-local' for AFM files fonts > names > 0 entries found, 0 AFM files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-modules' for AFM files fonts > names > 0 entries found, 0 AFM files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-context' for AFM files fonts > names > 0 entries found, 10 AFM files checked, 10 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf-mswin' for AFM files fonts > names > 0 entries found, 0 AFM files checked, 0 okay fonts > names > scanning path 'C:/ConTeXt/tex/texmf' for AFM files fonts > names > 0 entries found, 96 AFM files checked, 96 okay fonts > names > 212 tree files identified, 106 skipped, 106 duplicates, 106 hash entries added, runtime 3.143 seconds fonts > names > identifying system font files with suffix 'otf' fonts > names > 'OSFONTDIR' specifies path 'c:/windows/fonts' fonts > names > 'fontconfig file' specifies path 'c:/windows/fonts' fonts > names > globbing path 'c:/windows/fonts/**.otf' fonts > names > identifying system font files with suffix 'OTF' fonts > names > globbing path 'c:/windows/fonts/**.OTF' fonts > names > 4 system files identified, 0 skipped, 0 duplicates, 4 hash entries added, runtime 0.940 seconds fonts > names > identifying system font files with suffix 'ttf' fonts > names > globbing path 'c:/windows/fonts/**.ttf' fonts > names > identifying system font files with suffix 'TTF' fonts > names > globbing path 'c:/windows/fonts/**.TTF' mtx-context | fatal error: return code: 1>Exit code: 1

1 0

Re: [NTG-context] \startanimation and \dorecurse
by Jeong Dal 22 Oct '14

22 Oct '14

Dear Wolfgang, According to your advice, I am able to make a working example as following. \usemodule[animation] \setupinteraction[state=start] \startuseMPgraphic{Circles}{s} numeric sn, L, N; path p, q; p := fullcircle scaled 72; L:=length p; N:=20; sn := \MPvar{s}; q := subpath (0, sn/N*L) of p;% draw q withcolor red; fill fullcircle scaled 3 shifted point length q of q withcolor blue; setbounds currentpicture to unitsquare shifted (-0.5,-0.5) scaled 75; \stopuseMPgraphic \starttext \startanimation[menu=yes, menucolor=blue, framerate=5] \dorecurse{20} {\expanded{\frame{ \useMPgraphic{Circles}{s=\recurselevel}}}} \stopanimation \stoptext One more question. In metafun document, there is a command \setupMPvariables before \startuseMPgraphic. But we don’t use it in this example. Hence I think that it is not necessary always. Is there any case in which we have set the MPvariables? Thank you. Best regards, Dalyoung

1 0

Re: [NTG-context] \startanimation and \dorecurse
by Jeong Dal 21 Oct '14

21 Oct '14

Dear Wolfgang, Thank you for a nice solution. I applied your method to produce an animation which draw a circle using the following: %%%%%%%% \usemodule[animation] \setupinteraction[state=start] \startuseMPgraphic{Circles}{s} numeric sn, L, N; path p, q; p := fullcircle scaled 72; L:=length p; N:=20; sn:= \MPvar{s}; q := subpath (0, sn/N*L) of p;% draw q withcolor red; fill fullcircle scaled 3 shifted point length q of q withcolor blue; setbounds currentpicture to unitsquare shifted (-0.5,-0.5) scaled 75; \stopuseMPgraphic \starttext \startanimation \dorecurse{20} {\startexpanded %\setupMPvariables[Circles][s] \useMPgraphic{Circles}{s=\recurselevel} \stopexpanded} \stopanimation \stoptext %%%%%%%%%% However, it just draw 20 figures instead of making an animation. Would you please tell me what is wrong in the above code? Thank you. Best regards, Dalyoung

2 1

Extra line in a list
by Fabrice Couvreur 21 Oct '14

21 Oct '14

Hi, In the code below, why is there an extra line in the first item ? Best regards, Fabrice \usesymbols[mvs] \setupsymbolset[europe] \starttext \startitemize[n][stopper={.},style=bold] \item \startitemize[a][stopper={.},style=bold] \item On pose $P_A=9$ et $P_B=7$. On a alors $\frac{1}{2}P_A+\frac{1}{2}P_B=4,5+3,5=8$. Le prix du kilogramme de mélange $M_1$ dont la moitié est de variété A est donc de 8 \symbol[EUR]. \item $\frac{1}{4}P_A+\frac{3}{4}P_B=2,25+5,25=7,5$. Le prix du kilogramme de mélange $M_2$ contenant $\frac{1}{4}$ de variété A est donc de 7,5 \symbol[EUR]. \item $\frac{3}{5}P_A+\frac{2}{5}P_B=5,4+2,8=8,2$. Le prix du kilogramme de mélange $M_3$ contenant $\frac{2}{5}$ de variété B est donc de 8,2 \symbol[EUR]. \stopitemize \stopitemize \stoptext

1 0

Slanted, double-quoted quotations
by Sander Maijers 21 Oct '14

21 Oct '14

Hi, I'm using beta 2014.09.27. The code below produces a slanted, unquoted quotation, whereas I intend to produce a slanted, double-quoted quotation. How can I fix it? \definedelimitedtext[quotationsl][ style=slanted, left={\symbol[leftquotation]}, right={\symbol[rightquotation]}, location=text, ] \setupdelimitedtext[quotationsl][style=slanted,left={\symbol[leftquotation]},right={\symbol[rightquotation]}] \starttext \quotationsl{This should be slanted and double-quoted.} \stoptext Best, Sander Maijers

5 8

Does \url work like \from?
by Sander Maijers 21 Oct '14

21 Oct '14

Hi, On http://wiki.contextgarden.net/url#Overview is stated: > You can use > > \url[aurl] > > as well, which behaves like \from[#1]. > I may be wrong to interpret \url a synonym of \from based on the documentation, as \from has only one parameter though. Test: \useURL[author_email][mailto:invalid@invalid.invalid][][A Name] > > \setupinteraction[state=start] > \starttext > > \from[author_email] > \url[author_email] > > \stoptext > The first URL has 'A Name' as title and is clickable, the second one the e-mail address and is not clickable. Best, Sander

2 1

Korean unfonts globbing path error
by neva park 21 Oct '14

21 Oct '14

Hi I don,t koow how to Korean unfonts error massage help =============== \setscript[hangul] \setupbodyfont[unfonts] \starttext 한글 \stoptext Result is =============== >context --autopdf default.tex mtx-context | run 1: luatex --fmt="C:/ConTeXt/tex/texmf-cache/luatex- cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" -- jobname="default" --lua="C:/ConTeXt/tex/texmf-cache/luatex- cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" - -no-parse-first-line --c:autopdf --c:currentrun=1 -- c:fulljobname="./default.tex" --c:input="./default.tex" --c:kindofrun=1 -- c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/ConTeXt/tex/texmf- context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2014.10.19 21:08 MKIV beta fmt: 2014.10.20 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/ConTeXt/tex/texmf- context/tex/context/base/cont-new.mkiv close source > 2 > 2 > C:/ConTeXt/tex/texmf- context/tex/context/base/cont-new.mkiv system > files > jobname 'default', input './default', result 'default' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/Users/A8526/Desktop/default.tex open source > 3 > 4 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-unfonts.mkiv open source > 4 > 5 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-texgyre.mkiv close source > 4 > 5 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-texgyre.mkiv open source > 4 > 6 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-xits.mkiv open source > 5 > 7 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-texgyre.mkiv close source > 5 > 7 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-texgyre.mkiv close source > 4 > 7 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-xits.mkiv close source > 3 > 7 > C:/ConTeXt/tex/texmf- context/tex/context/base/type-imp-unfonts.mkiv .... fonts > names > globbing path 'c:/windows/fonts/**.ttf' fonts > names > identifying system font files with suffix 'TTF' mtx-context | fatal error: return code: 1>Exit code: 1

1 0

\startanimation and \dorecurse
by Jeong Dal 20 Oct '14

20 Oct '14

Hi, I tested the following simple code to generate enlarging circles as a test of animation. But it just draw 5 circles in a row. \usemodule[animation] \setupinteraction[state=start] \startbuffer[Circles] numeric u; u:= 1cm; draw fullcircle scaled \MPrawvar{Circles}{s}u; \stopbuffer \starttext \startanimation { \dorecurse{5}{% \setupMPvariables[Circles][s=\recurselevel] \processMPbuffer [Circles] }} \stopanimation \stoptext It seems to me that \startanimation just treat the figures {\dorecurse … } as just one figure. Is there a way to treat it 5 figures to generate animation? Thank you for reading. Best regards, Dalyoung

2 1

Problem with last version of ConTeXt
by Jaroslav Hajtmar 20 Oct '14

20 Oct '14

Hello ConTeXist.... Already a long time I use ConTeXt for processing the same files and always worked very well. Yesterday I updated version of ConTeXt Standalone and then I (like many times before) wanted to translate his usual document. Unfortunately, the translation stopped with an error message that I do not understand. Does anyone know what this could mean? The source code of my source file I did not change for a very long time a translation by using ConTeXt from TeXLive 2014 is without problem. Thanks for the advice. Jaroslav Hajtmar Here is error message. C:\$~1da\PODNIK\ConTeXt>context Ds477_2202421 mtx-context | warning: no (local) file './Ds477_2202421', proceeding mtx-context | run 1: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="Ds477 _2202421" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce 0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentr un=1 --c:fulljobname="./Ds477_2202421" --c:input="./Ds477_2202421" --c:kindofrun =1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv ConTeXt ver: 2014.09.25 18:58 MKIV beta fmt: 2014.10.18 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'Ds477_2202421', input './Ds477_2202421', resu lt 'Ds477_2202421' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex open source > 3 > 4 > c:/1da/tex/context/ctx_sml_library.tex colors > 'rgb' color space is supported colors > 'cmyk' color space is supported resolvers > modules > 'visual' is loaded open source > 4 > 5 > C:/context/tex/texmf-context/tex/context/base/m-visual .mkiv loading > ConTeXt Tracking Macros / Visualization close source > 4 > 5 > C:/context/tex/texmf-context/tex/context/base/m-visual .mkiv setup > error in line 14, namespace 'itemgroup', instance 'itemize', k ey 'n' setup > error in line 14, namespace 'itemgroup', instance 'itemize', k ey 'packed' close source > 3 > 5 > c:/1da/tex/context/ctx_sml_library.tex close source > 2 > 5 > C:/$~1da/PODNIK/ConTeXt/Ds477_2202421.tex close source > 1 > 5 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv *

2 6

backgrounds
by Hans Hagen 20 Oct '14

20 Oct '14

Hi, new in next beta %D Sometimes you have a document wide (page) background but need to overload it %D locally. In such case (at least in my experience) the only values that get set %D are the background and backgroundcolor (if set at all). A full inheritance chain %D would complicate things because then we need to use named backgrounds which in %D turn will make this mechanism slower. I considered independent local backgrounds %D but that also complicates the code (not that much) but isolation means that we %D need to set more parameters each time. The following simple approach proabbly %D suits most usage. \starttext \setupbackgrounds[page][background=color,backgroundcolor=red] \input tufte \page \setupbackgrounds[page][background=,backgroundcolor=] \input tufte \page \setupbackgrounds[page][background=color,backgroundcolor=red] \input tufte \page \pushbackground[page] \setupbackgrounds[page][background=color,backgroundcolor=green] \input tufte \page \popbackground \input tufte \page \stoptext (only two parameters pushed/popped) -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

3 3

bug in \useURL?
by Pablo Rodriguez 19 Oct '14

19 Oct '14

Dear list, I have the following sample: \asciimode \starttext \useURL[url][only#one]\from[url] \stoptext \asciimode seems to repeat the hash char. I’m afraid this might be a bug. Many thanks for your help, Pablo -- http://www.ousia.tk

2 1

indentnext=no and \item
by Pablo Rodriguez 19 Oct '14

19 Oct '14

Dear list, I have the following sample: \setupindenting[medium, always] \starttext \startitemize[a, indentnext=no] \item This is not indented. This shouldn’t be indented, but it is. \stopitemize \stoptext How can I get that the paragraphs other than the first in the item don’t get indented? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

displaymath, grid, vertical spacing, setupformulas
by Mikael P. Sundqvist 19 Oct '14

19 Oct '14

Hi, I have problems to tune the vertical spacing before and after displaymathformulas in grid typesetting. With the example below, I like the spacing in the second formula but not the first (too big). If I comment out the \setupformulas part, then the first one looks OK, but the second is good. Is there a configure to get both of these to occupy three lines? I use the latest standalone. /Mikael \setuplayout[ grid=tolerant, ] \showgrid %\setupformulas[ %spacebefore=, %spaceafter=, %] \starttext \dorecurse{10}{This is a statement. } \startformula 1+2+\cdots+(n-1)+n=\frac{1+n}{2}n. \stopformula \dorecurse{10}{This is a statement. } \startformula 1+2+\cdots+(n-1)+n=\tfrac{1+n}{2}n. \stopformula \dorecurse{10}{This is a statement. } \stoptext

1 1

Structure of titles in MkIV
by Michał Goliński 19 Oct '14

19 Oct '14

Given a file: \setupinteraction[state=start] \placebookmarks[part,chapter][part,chapter] \starttext \startchapter[title=Prologue, number=no] \input knuth \stopchapter \startpart[title={Part A}] \startchapter[title=One] \input knuth \stopchapter \stoppart \startchapter[title=Epilogue] \input knuth \stopchapter \stoptext I would expect to have the logical structure of titles as follows: + Prologue + Part A - + One + Epilogue i.e., "Epilogue" should be at the highest level, as "Prologue" is. Context gives me an Epilogue that is a child of "Part A". Is it possible to have the chapter "Epilogue" not be a child of "Part A"? Best regards Michał Goliński

5 10

Module algorithmic
by Fabrice Couvreur 18 Oct '14

18 Oct '14

Hi Wolfgang, How to reduce the size of the float ? Best regards, Fabrice \usemodule[algorithmic] \definefloat[algorithm][algorithms] \definecolor[H1prime][c=0.50, m=0.00, y=1.00, k=0.00] \definecolor[H4][c=0.07, m=0.00, y=0.15, k=0.00] \setupfloat [algorithm] [background=color, frame=on, framecolor=H1prime, backgroundcolor=H4, width=0.5\textwidth] \starttext \placealgorithm[none][]{} {\startalgorithmic\black \STATE{\bf Variables :} \STATE $N$ et $P$ sont deux entiers naturels \STATE $A$ est un nombre réel \STATE{\bf Entrée :} \STATE Demander à l'utilisateur la valeur de $N$ \STATE{\bf Initialisation :} \STATE Affecter à $A$ la valeur $92\,000$ \STATE{\bf Traitement :} \STATE Affecter à $P$ la valeur $N-1$ \FOR{$I=1$ to $P$} \STATE Affecter à $A$ la valeur $1,163 \times A$ \STATE Afficher A \ENDFOR \stopalgorithmic} \stoptext

3 2

\startitem and \startparagraph
by Rik Kabel 18 Oct '14

18 Oct '14

What is the proper way to delimit paragraphs within an itemized list using \start..\stop tagging (as for epub and such)? When I wrap paragraphs with \startparagraph..\stopparagraph within the \startitem..\stopitem, there is an unwanted newline inserted between the bullet and the item text. Or, is it not recommend to wrap paragraphs that are in enumerations? I ask because http://wiki.contextgarden.net/Epub_Sample suggests “Make sure to tag all your structural elements with \start...-\stop..., e.g. \startchapter, but even \startparagraph!” I also note the appearance of \startcontent..\stopcontent and \stopcaption..\startcaption and such, suggesting to me that semantic tagging may be a useful thing to add to new documents in order to support new output formats. \starttext \startitemize \startitem \startparagraph Item one paragraph one. \stopparagraph \startparagraph Item one paragraph two. \stopparagraph \startparagraph Item one paragraph three. \stopparagraph \stopitem \startitem \startparagraph Item two paragraph one. \stopparagraph \startparagraph Item two paragraph two. \stopparagraph \startparagraph Item two paragraph three. \stopparagraph \stopitem \stopitemize \startitemize \item Item three paragraph one. Item three paragraph two. Item three paragraph three. \item Item four paragraph one. Item four paragraph two. Item four paragraph three. \stopitemize \stoptext -- Rik Kabel

3 4

Trying to emulate CSS "object-fit" behaviour...
by Stuart Hungerford 18 Oct '14

18 Oct '14

Hi, I have a collection of PDF files of varying sizes and aspect ratios. I'm currently using a combination and external figures to place these into frames: \setupexternalfigures[width=45.2mm, frame=off, factor=fit] \setupcombinations[nx=5,ny=4,width=277mm,distance=10mm,after={\blank[10mm]}] \setupframed[offset=1.0mm,background=color,rulethickness=0.25pt,backgroundcolor=white,framecolor=lightgray] \starttext \startsection [title={title text}] \placefigure[here][nonumber] {\vspace more text} {\startcombination {\framed[] {\externalfigure[1.pdf][location=middle]}{}}{} %% and so on This works well, but what I'd like to do is choose a fixed size frame for each PDF and have ConTeXt fill the frame in the same way as these CSS commands: object-fit : cover; object-position : top left; overflow : hidden; (http://www.w3.org/TR/css3-images/#the-object-fit) That is, scale the PDF until all the frame is covered with some part of the PDF, even if means overflowing the frame. The "overflow: hidden" would then clip the overflow to the frame. Different PDF's could have different scalings applied to make this work, which is fine for this application. I understand this may not be an idiomatic use of ConTeXt--any advice or suggestions for alternate approaches much appreciated. Stu

2 3

new mp feature: eofill
by Hans Hagen 18 Oct '14

18 Oct '14

\starttext \startMPpage fill fullcircle scaled 10cm -- fullcircle scaled 8cm -- fullcircle scaled 4cm -- cycle withcolor red/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; fill fullcircle scaled 10cm -- reverse fullcircle scaled 8cm -- reverse fullcircle scaled 4cm -- cycle withcolor green/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; eofill fullcircle scaled 10cm -- fullcircle scaled 8cm -- fullcircle scaled 4cm -- cycle withcolor blue/4 withtransparency (1,.5) ; currentpicture := currentpicture shifted (-5cm,0) ; \stopMPpage \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Re: [NTG-context] ntg-context Digest, Vol 124, Issue 35
by Stuart Hungerford 17 Oct '14

17 Oct '14

On Thu, Oct 16, 2014 at 10:35 PM, <ntg-context-request(a)ntg.nl> wrote: > \framed > [offset=overlay,width=4cm,height=4cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \framed > [offset=overlay,width=4cm,height=6cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \framed > [offset=overlay,width=6cm,height=4cm] > {\externalfigure[t:/sources/cow.pdf][factor=max]} > > \stoptext > > >> This works well, but what I'd like to do is choose a fixed size frame >> for each PDF and have ConTeXt fill the frame in the same way as these >> CSS commands: >> >> object-fit : cover; >> object-position : top left; >> overflow : hidden; [Forgot to add: this is with the ConTeXt bundled in Tex Live 2014] Many thanks -- although I don't see the effect I'm trying to get. In the code below the cow picture should fill the three frames at three different scales with no white bars between the frame and the externalfigure frame: \setupexternalfigures[location={default}] \starttext \framed [offset=overlay,width=10cm,height=2cm] {\externalfigure[cow][frame=on,factor=max]} \framed [offset=overlay,width=4cm,height=8cm] {\externalfigure[cow][frame=on,factor=max]} \framed [offset=overlay,width=6cm,height=6cm] {\externalfigure[cow][frame=on,factor=max]} \stoptext Stu

1 0

Prevent page break in middle of paragraph
by Ben Moon 17 Oct '14

17 Oct '14

Hi, I'm trying to get a thesis in a final shape and encounter a page break ("... Über 70 % der pagebreak") in the middle of a paragraph where there still seems to be plenty of space to finish that paragraph. If I add a few lines to the text it works ok. Also "\page[no]" doesn't work or "\vbox" and "\setpenalties\widowpenalties{100}\maxdimen" I couldn't get working neither. Though the last one got closest. Here's the minimal example I could come up with, sorry for it beeing a bit lengthy: %%%%%%%%%%%%%% \installlanguage[german][de] \mainlanguage[de] \setuppapersize[A4][A4] \setuplayout[reset] \setuplayout[ location=doublesided, top=20mm, % 20 topspace=30mm, % 20 bottom=20mm, % 20 %bottomdistance=0mm, backspace=30mm, leftmargin=30mm, leftmargindistance=0mm, rightmargin=30mm, % 25 rightmargindistance=0mm, header=2\bodyfontsize, headerdistance=\bodyfontsize, footer=2\bodyfontsize, footerdistance=\bodyfontsize, height=fit, width=fit, % grid=yes ] \setuppagenumbering[ way=bytext, partnumber=no, alternative=doublesided, location=right, style=\sl ] \setupindenting[medium,yes] \setupcaption[table][headstyle=normal, location=top, stopper={.}, width=\makeupwidth, style={\switchtobodyfont[11pt]}] \setuphead[section][style=\bfb] \setuphead[subsection][style=\bfa] \setupheads[indentnext=yes] \setupfloats[indentnext=yes] \setupheadertexts[][{\sl\getmarking[section]}][{\sl \getmarking[chapter]}][] \setupbackgrounds[header][text][bottomframe=on] \setupbackgrounds[footer][text][topframe=on] \starttext \setupinterlinespace[big] pT--Klassifikation teilte sich wie folgt auf: pTis 13 (3,5\,\%), pT1 238 (64,2\,\%), pT2 114 (30,7\,\%) und pT3 6 (1,6\,\%) Fälle. Es handelte sich in 287 Fällen (77,4\,\%) um ein ductal invasives, in 41 (11,1\,\%) um ein lobulär invasives, in 6 (1,6\,\%) um ein gemischtes und in 24 Fällen (6,5\,\%) um ein Mammakarzinom anderer Art. Ein Ductales Carcinoma in situ fand sich in 13 Fällen (3,5\,\%) (Tabelle \in[tab:Pat-Charakt]). Hier wurde die SLNB nur im Rahmen einer Mastektomie durchgeführt. Da in Deutschland bei klinisch unauffälliger Axilla die Wächterlymphknotentechnik Methode der Wahl ist \cite[Kuehn2005]{}, keine nationale Leitlinie über ein exaktes und standardisiertes Markierungsprotokoll existiert und den Patientinnen durch die retrospektive Analyse keine Unannehmlichkeiten entstanden sind bzw. sie keinen Schaden erlitten haben, konnte auf eine Genehmigung durch die Ethikkommission verzichtet werden. \placetable[here][tab:Pat-Charakt]{Tabellarische Zusammenfassung der in der vorliegenden Studie zusammengeführten, wichtigsten Patientencharakteristika.} { \setupTABLE[c][1][width=5em] \setupTABLE[c][2][width=8em] \setupTABLE[c][3][align=center] \setupTABLE[frame=off] \setupTABLE[r][1,4,7,10,15,21,24][bottomframe=on] \bTABLE \bTR\bTD[nc=2] Geschlecht (\Sigma=371) \eTD\bTD \eTD \eTR \bTR\bTD \eTD\bTD Frauen \eTD\bTD 368 \eTD \eTR \bTR\bTD \eTD\bTD Männer \eTD \bTD 3 \eTD \eTR \bTR\bTD[nc=2] Alter (Jahre)\eTD \eTR \bTR\bTD \eTD\bTD Median\eTD \bTD 60,4 \eTD \eTR \bTR\bTD \eTD\bTD Bereich\eTD \bTD 25,3\,--\,86,5\eTD \eTR \bTR\bTD[nc=2] Tumorgröße (mm) \eTD \eTR \bTR\bTD \eTD\bTD Median\eTD \bTD 16 \eTD \eTR \bTR\bTD \eTD\bTD Bereich\eTD \bTD 0,9\,--\,140 \eTD \eTR \bTR\bTD[nc=2] pT Klassifizierung \eTD \eTR \bTR\bTD \eTD\bTD pTis\eTD \bTD 13 (3,5\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT1\eTD \bTD 238 (64,2\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT2\eTD \bTD 114 (30,7\,\%) \eTD \eTR \bTR\bTD \eTD\bTD pT3\eTD \bTD 6 (1,6\,\%) \eTD \eTR \bTR\bTD[nc=2] Histologie\eTD \eTR \bTR\bTD \eTD\bTD ductal invasiv\eTD \bTD 287 (77,4\,\%) \eTD \eTR \bTR\bTD \eTD\bTD lobulär invasiv\eTD \bTD 41 (11,1\,\%) \eTD \eTR \bTR\bTD \eTD\bTD kombiniert\eTD \bTD 6 (1.6\,\%) \eTD \eTR \bTR\bTD \eTD\bTD DCIS\eTD \bTD 13 (3,5\,\%) \eTD \eTR \bTR\bTD \eTD\bTD andere\eTD \bTD 24 (6,5\,\%) \eTD \eTR \eTABLE } \section{Markierungstechnik} Ein Radiologe mit über 30 Jahren Expertise in der interstitiellen peritumoralen Lymphszintigraphie und der Funktionslymphszintigraphie führte die SN--Markierung am Vortag etwa 20 Stunden vor der Operation durch. Durch diesen Zeitabstand war eine ausreichende Möglichkeit für Spätaufnahmen gegeben. \subsection{Applizierter Tracer} {Im Laufe der Untersuchungen kamen drei verschiedene Tracer, von drei unterschiedlichen Herstellern zur Verwendung: {\it Nanocoll\high{®}} (GE Healthcare Buchler, Braunschweig, Deutschland), {\it Nano--Albumon\high{®}} (Medi--Radiopharma Ltd., Budapest, Ung\-arn), sowie {\it Nanocis\high{®}} (CIS bio, Berlin, Deutschland). Bei {\it Nanocoll\high{®}} und {\it Nano--Albumon\high{®}} handelt es sich um ein Natrium--(\high{99m}Tc)--Technetium--Pertechnetat markiertes Humanserum--Albumin--Nanokolloid. {\it Nanocis\high{®}} demgegenüber ist ein kolloidales (\high{99m}Tc)--Tech\-netium--Rheniumsulfid. Die Verwendung von Tracern unterschiedlicher Hersteller war lediglich durch die lokale und momentane Verfügbarkeit begründet. Gemäß Herstellerangaben liegt bei {\it Nanocoll\high{®}} die Teilchengröße zu 95\,\% im Bereich unter 80\,nm, zu 4\,\% zwischen 80 und 100\,nm und bei 1\,\% über 100\,nm. Über 70\,\% der {\it Nanocis\high{®}}--Partikel haben eine Größe zwischen 31,6 und 178\,nm, davon 20\,\% unter 100\,nm. Die Partikelgröße von {\it Nano--Albumon\high{®}} liegt zu 80\,\% unter 100\,nm.} \subsection{Tracerapplikation} Die Patientin wurde in ca. 30° Neigung zur kontralateralen Seite der betroffenen Brust gelagert. Es wurde ein Depot des momentan verfügbaren Radiopharmakons langsam, intradermal am periareolären Rand des betroffenen Quadranten gesetzt (Abbildung \in[fig:Tracer]). Die Injektionsnadel wurde so positioniert, dass die Nadelspitze vor Beginn der Injektion grau durch die Haut schimmerte und sich mit beginnender Injektion unmittelbar eine Quaddel bildete. Bei Schmerzen wurde kurz pausiert. \stoptext %%%%%%%%%%%%%% The context version I'm using is the current debian installation in the unstable branch: context --version mtx-context | ConTeXt Process Management 0.60 mtx-context | mtx-context | main context file: /usr/share/texmf/tex/context/base/context.mkiv mtx-context | current version: 2014.05.21 22:04 Help is much appreciated Thanks very much in advance Ben

3 3

sidefloats
by Hans Hagen 17 Oct '14

17 Oct '14

new in next beta: \starttext \placefigure [left] {} {\framed[height=1cm,width=2cm]{}} \input tufte \doifelsesidefloat {\dontleavehmode{\bf OKAY}: HERE} {\inmargin{OKAY} HERE} \placefigure [left] {} {\framed[height=10cm,width=2cm]{}} \input tufte \doifelsesidefloat {\dontleavehmode{\bf OKAY}: HERE} {\inmargin{OKAY} HERE} \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

slightly-OT: Adobe records your every move!
by Alan BRASLAU 17 Oct '14

17 Oct '14

E-book specialists, beware: http://arstechnica.com/security/2014/10/adobes-e-book-reader-sends-your-rea… Alan

2 3

\setupformulas and \frac give small symbols
by Mikael P. Sundqvist 16 Oct '14

16 Oct '14

Hi, with a standalone installation updated today, I get smaller letters in \frac if \setupformulas[align=flushleft] is applied. The test file below generates the attached pdf. /Mikael \starttext \startformula z=\frac{x}{y} \stopformula \setupformulas[align=flushleft] \startformula z=\frac{x}{y} \stopformula \stoptext

3 4

math snapping
by Hans Hagen 16 Oct '14

16 Oct '14

Hi, new experimental feature in next beta \enabletrackers[math.openedup] \starttext \dorecurse{10}{\dorecurse{#1}{whatever }} \startitemize[packed] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \startitemize[packed,columns] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \dorecurse{5}{\dorecurse{#1}{whatever }\openedupimath{\frac{1}{2}} } \startitemize[packed,columns] \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{1+2} whatever \startitem whatever \openedupimath{1+2} whatever \stopitemize \dorecurse{5}{\dorecurse{#1}{whatever }\openedupimath{1+2} } \startitemize[packed] \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \startitem whatever \openedupimath{\frac{1}{2}} whatever \stopitemize \dorecurse{10}{whatever } \dorecurse {5}{\dorecurse{#1}{whatever }\openedupimath{\frac{1}{2}} } \dorecurse{10}{whatever } \stoptext -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 4

Metapost/Metafun: textext
by Willi Egger 15 Oct '14

15 Oct '14

Hi all, In the course of a project I wanted to create a decorative border around a framed text. The border should be built from chosen glyphs which are placed along the border as pictures. For this purpose the textext macro is a good candidate. However I run into troubles. With help from Hans, a solution could be found. Hans, thank you so much! I have created a section on the wiki, where the problem is shown and the solution is given. In order to illustrate the whole thing I placed also a full example. http://wiki.contextgarden.net/MetaPost#Repetition_of_a_Text_Element_to_Fill… Kind regards Willi

1 0

Stopper and itemize
by Fabrice Couvreur 15 Oct '14

15 Oct '14

hi, In the following code, the default stopper is the point. \starttext \startitemize[columns,a,joinedup] \item $f(0)$ \item $g(0,3)$ \item $f(\sqrt 2)$ \item $g(-4)$ \stopitemize \stoptext How to have a break ? Best regards, Fabrice

4 4

Re: [NTG-context] (MKIV beta) APA citations: "et al." incorrectly written
by Robert Blackstone 15 Oct '14

15 Oct '14

On 6 Oct 2014, at 23:33 , Sander Maijers <s.n.maijers(a)gmail.com> wrote: > Who can offer a short-term solution to this problem? All I want is to > reference a work, listing all of the authors' names, in APA6 format. If > necessary I'll prescribe the output format manually. > > Best, > > Sander Maijers > >>> >>> \setupbibtex[database={references/bibliographic_database},sort=author] >>>> \setuppublications[alternative=apa] >>>> >>>> \starttext >>>> \cite[extras={, p.~3}][Zhou2012] >>>> \cite[Zhou2012] >>>> \stoptext >>>> >>> >>> Incorrectly produces: >>> >>>> (Zhou et al., 2012, p. 3) (Zhou et al., 2012) >>>> >>> >>> Instead of: >>> >>>> (Zhou, Lyu, & King, 2012, p. 3) (Zhou, Lyu, & King, 2012) >>> >>> What I would do is, for the final processing, not to load the .bib-file but the .bbl that was generated in the previous run. You can open that file in any text processor (I mostly use TeXShop) and manually change the Author for this particular entry. In the .bbl the field Author has this form: \author[]{}[]{}{} . You should be able to solve your problem by putting inside the last pair of brackets exactly how you would like your authors et. al. to appear in your output. Place the whole lot again between brackets: \author[]{}[]{}{{Zhou, Tom Chao and Lyu, Michael R. and King, Irwin}} or whatever you want. But again, don’t input the bib-file. Every time you do that the old .bbl is overwritten and your correction will be lost. ConTeXt uses the .bbl, not the .bib. I hope this helps. Best regards, Robert Blackstone

3 3

Starting with bibliography / international entries
by Henning Hraban Ramm 15 Oct '14

15 Oct '14

Hi, it’s the first time I need a proper bibliography, and our book will be published in three languages (German, English and Russian). Most of the sources are in Russian. I’d use everything (titles, author names) in original spelling (i.e. cyrillic), but would like to provide also a transliteration. In German and English issues I’d like to use a „Latin“ reference code, in Russian a Cyrillic (or original-type) one. What format would you suggest for the database? Can ConTeXt MkIV already handle something „better“ than .bib? (I guess the information in the wiki is outdated?) Does general BibTeX documentation still apply? Greetlings, Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

5 8

Strange error with bookmarks
by Michał Goliński 14 Oct '14

14 Oct '14

While trying to make a longer document with ConTeXt I stumbled into a strange error with the latest beta (I spotted it for the first time some time ago). For the following file: \setupinteraction[state=start,focus=standard] \placebookmarks[part,chapter][part,chapter][number=no] \starttext \chapter{0} \startpart[title={A}] \chapter{1} \chapter{2} \stoppart \startpart[title={B}] \chapter{3} \chapter{4} \chapter{5} \chapter{6} \chapter{7} \chapter{8} \chapter{9} \chapter{10} \stoppart \completecontent[criterium=all] \stoptext ConTeXt would generate a file in which the link for chapter "6" is not working. Neither the link in the table of contents works nor the link in the generated PDF bookmarks. When removing the second line, the link in the table of contents doesn't work, but everyting is ok if one removes the table of contents. What seems even more weird for me, the problem goes away if one removes *any* chapter. It persists for chapter "6" even if chapters are distributed differently between parts without changing their order. Am I doing something wrong? I hope someone might be able to help. Best regards Michał

2 3

beta
by Hans Hagen 14 Oct '14

14 Oct '14

Hi, new in next beta: \setuphead[alternative=reverse] \starttext \chapter{Foo} \section{One} \section{Two} \section{Three} \chapter{Bar} \section{One} \section{Two} \section{Three} \stoptext renders Foo 1 One 1.1 etc ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

new mechanism
by Hans Hagen 14 Oct '14

14 Oct '14

Hi, As we needed it for a project, I made this: \showinjector \setinjector[register][3][\column] \setinjector[list] [2][{\blank[3*big]}] \starttext \placelist[section][criterium=text] \blank[3*big] \placeregister[index][criterium=text] \page \startsection[title=Alpha] first \index{first} \stopsection \startsection[title=Beta] second \index{second} \stopsection \startsection[title=Gamma] third \index{third} \stopsection \startsection[title=Delta] fourth \index{fourth} \stopsection \stoptext A typical ugly last-resort hack. Only for auto-generated lists and registers. It's in the beta. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

resetting footnotes number
by Andrea Valle 14 Oct '14

14 Oct '14

Dear list, As I have a book with many chapters, I’d like to reset footnote numbering at each chapter. How can I achieve this? I’m looking here: http://wiki.contextgarden.net/Footnotes but can’t find a solution I looked also at \setupfootnotes but it says: way bytext bysection Start numbering from 1 again at the start of every section? BTW on mkiv, so I guess I should use \setupnotation Thanks Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - StudiUm Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> http://www.fonurgia.unito.it/andrea/ --> http://www.flickr.com/photos/vanderaalle/sets/ --> http://vimeo.com/vanderaalle --> andrea.valle(a)unito.it -------------------------------------------------- "This is a very complicated case, Maude. You know, a lotta ins, a lotta outs, a lotta what-have-yous." (Jeffrey 'The Dude' Lebowski)

2 1

first line indents
by Andrea Valle 14 Oct '14

14 Oct '14

Hi, I’d like to have first line indents for the whole document I’m working o (the latter including various chapter). Each new line, an indent. Following the wiki, I’m able only to get the first line of a section indented. Thanks best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - StudiUm Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> http://www.fonurgia.unito.it/andrea/ --> http://www.flickr.com/photos/vanderaalle/sets/ --> http://vimeo.com/vanderaalle --> andrea.valle(a)unito.it -------------------------------------------------- "This is a very complicated case, Maude. You know, a lotta ins, a lotta outs, a lotta what-have-yous." (Jeffrey 'The Dude' Lebowski)

2 7

(no subject)
by Fabrice Couvreur 13 Oct '14

13 Oct '14

hi, In the following code, the default stopper is the point. \starttext \startitemize[columns,a,joinedup] \item $f(0)$ \item $g(0,3)$ \item $f(\sqrt 2)$ \item $g(-4)$ \stopitemize \stoptext How to have a break ? Best regards, Fabrice

2 1