- ntg-context - Mailing Lists

Problems with setfirstline
by Rik Kabel 18 Oct '17

18 Oct '17

Setfirstline does not seem to be working well with most fonts, perhaps all. The example below shows the issue. \define \Fonts {libertinus,ebgaramond,termes,antykwa, cambria,minion,bonum,heros,pagella,iwona} \define[1] \Setupbodyfont{\setupbodyfont[#1,11pt]} \define[1] \DisplayExample{\switchtobodyfont[#1]\getbuffer} \setupfirstline [alternative=line, style=\setfontfeature{smallcaps}] \setupinitial [location=text,n=2,color=darkred] \setuphead [chapter][ after={\blank[big]\setfirstline\setinitial}] \setuphead [section][continue=yes, after=\setfirstline] \startbuffer \startchapter[title=Initial and first line: \Word{\fontclass}] \startparagraph \input darwin \stopparagraph \startsection[title=First line only] \startparagraph \input montgomery \stopparagraph \startparagraph \input sapolsky \stopparagraph \stopsection \stopchapter \stopbuffer \expandafter\processcommalist\expandafter[\Fonts]\Setupbodyfont \starttext \expandafter\processcommalist\expandafter[\Fonts]\DisplayExample \stoptext -- Rik

1 0

Is this a bug in header marking?
by Rik Kabel 17 Oct '17

17 Oct '17

As a followup to my query on suppressing header marking, I have prepared an example which clearly shows odd, if not buggy behavior. The book places chapter openings on recto pages which follow a verso that may have an epigraph. When there is no epigraph, the blank verso is properly unmarked by a header, but when there is an epigraph, the header from the previous chapter appears on the page. How can I eliminate this orphan header? \setuppagenumbering [alternative=doublesided,location=] \setupheadertexts [][{\it\getmarking[section]}] [{\it\getmarking[chapter]}][] \starttexdefinition unexpanded startSectionEpigraph \dostartbuffer [SectionEpigraph] [startSectionEpigraph][stopSectionEpigraph] \stoptexdefinition \setuphead [chapter][ beforesection=\setups{chapter:epigraph}] \startsetups chapter:epigraph \page[yes,left]% same result with yes,header,footer,left \doifelsebuffer{SectionEpigraph} {\getbuffer[SectionEpigraph] \resetbuffer[SectionEpigraph]} {\donothing} \page[yes,header,footer,right] \stopsetups \starttext \completecontent \startfrontmatter \startchapter[title=Preface] \startparagraph \input ward \stopparagraph \stopchapter \stopfrontmatter \startbodymatter \startchapter[title=Chapter First] \startparagraph \input ward \stopparagraph \stopchapter \startSectionEpigraph Why does this page have the heading from the previous chapter? \stopSectionEpigraph \startchapter[title=Chapter Second] \startparagraph \input ward \stopparagraph \stopchapter \startSectionEpigraph Look up! \stopSectionEpigraph \startchapter[title=Chapter Third] \startparagraph \input ward \stopparagraph \stopchapter \startchapter[title=Chapter Final] \startparagraph \input ward \stopparagraph \stopchapter \stopbodymatter \stoptext -- Rik

2 1

web certificaat verlopen ...
by Floris van Manen 17 Oct '17

17 Oct '17

modules.contextgarden.net uses an invalid security certificate. The certificate expired on 16 September 2017, 01:59. The current time is 17 October 2017, 22:15. Error code: SEC_ERROR_EXPIRED_CERTIFICATE (something might need to get fixed) .F

1 0

Remove header after ToC
by N. Raghavendra 17 Oct '17

17 Oct '17

I am a ConTeXt beginner. I am having trouble getting rid of the header after the ToC in a document that I am preparing. The following is a simplified version of the document. I get a header with "2" on the left edge, and "Chapter ." on the right edge, on page 2, which is an empty page after the ToC. How do I remove the header on this page? Thanks, Raghu. ---------------------------------------------------------------------- \starttext \setuppagenumbering [alternative=doublesided] \setupheadertexts [] \setupfootertexts [] \setupheadertexts [{\getmarking[section]}] [\pagenumber] [\pagenumber] [{Chapter \getmarking[chapternumber].\ \getmarking[chapter]}] \setuphead [chapter] [page={yes,header,footer,right}, header=empty] \startfrontmatter \completecontent \stopfrontmatter \startbodymatter \startchapter [title=A chapter] \startsection [title=A section] Some text \stopsection \page \startsection [title=Another section] Some text \stopsection \stopchapter \stopbodymatter \stoptext ---------------------------------------------------------------------- -- N. Raghavendra <raghu(a)hri.res.in>, http://www.retrotexts.net/ Harish-Chandra Research Institute, http://www.hri.res.in/

2 6

Quotation with method=font produces error
by Christoph Reller 17 Oct '17

17 Oct '17

Hi, In previous versions of ConTeXt the following MWE worked: \setupquotation[method=font] \starttext \quotation{A} \stoptext In more recent versions, the above produces an error: ! Extra }, or forgotten \endgroup l.3 \quotation{A} Is this a bug? Regards, Christoph

1 0

Suppress chapter title marking on blank page after chapter
by Rik Kabel 14 Oct '17

14 Oct '17

In a doublesided document, how can I suppress the chapter title marking in the header of the blank page that follows a chapter in which the text ends on a recto page? I do not want to suppress the header. The following example shows the problem on pages 4 and 6. I notice that the Contents chapter does not exhibit this problem (page 2). But checking the source for /completecontent/ provides no useful information. Indeed, when I use /title/ instead of /chapter/, as done in strc-lis.mkvi, page 2 gets the marking as well! \setuppagenumbering [alternative=doublesided,location=] \setupheadertexts [][{\it\getmarking[section]}] [{\it\getmarking[chapter]}][] \setupheadertexts [margin] [] [{\inframed[frame=off,leftframe=on,loffset=1em] {\userpage}}] [{\inframed[frame=off,rightframe=on,roffset=1em] {\userpage}}] [] \setuphead [chapter] [header=nomarking] \startbuffer[testt] \startchapter[title=Chapter] \startparagraph \input ward \stopparagraph \dorecurse{\numexpr2*\recurselevel\relax} {\startsection[title=Section] \startparagraph \input ward \stopparagraph \stopsection} \stopchapter \stopbuffer \starttext \completecontent \dorecurse{3}{\getbuffer[testt]} \startchapter[title={Chapter Last}] \input knuth \stopchapter \stoptext -- Rik

2 3

up and down arrows
by Wim 13 Oct '17

13 Oct '17

Dear all, Can anybody explain me why I can't use TeX constructs like: \left\downarrow \vcenter to 1.5cm{}\right. \Big\downarrow in mathmode in Context. It doesn't work with other downward or upward arrows either. Or are there alternatives in Context? Thank you, Wim W. Wilhelm

1 0

changed behavior in --result
by Pablo Rodriguez 12 Oct '17

12 Oct '17

Dear list, invoking latest beta (2017.10.10 12:00) with --result="/home/ousia/%e-2UP.pdf" gives the following error message: results are to be on the running path, not on '/home/ousia', ignoring --result This worked fine untill recently. Is there another way to specify the directory for the output file? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

issue with external image and PDF/A-3a
by Pablo Rodriguez 10 Oct '17

10 Oct '17

Dear list, I have this minimal sample: \setupbackend [format=PDF/A-3a, intent=sRGB IEC61966-2.1, profile={sRGB.icc,default_gray.icc}, level=0] \setuptagging[state=start] \setupcolors[cmyk=no] \startTEXpage[offset=1em] \externalfigure[transparent] \stopTEXpage \stoptext The external figure is available from http://pdf.ousia.tk/transparent.pdf (and output file at http://pdf.ousia.tk/transparent-pdf-a-3a.pdf) Using veraPDF (http://verapdf.org/) the output document doesn’t comply with the validation profile requirements. As Luigi wisely predicted, external images may be problematic. I get one error, because of the color of the external figure: https://github.com/veraPDF/veraPDF-validation-profiles/wiki/PDFA-Parts-2-an…. The PDF object in question is the following: 12 0 obj << /Type /XObject /Subtype /Form /FormType 1 /BBox [ 0 0 316.896 215.5669 ] /Group << /Type /Group /S /Transparency /I true /CS /DeviceRGB >> /Resources 21 0 R /Length 71 >> stream q 0.188235 0.392157 0 rg /a0 gs 28.348 187.219 260.203 -158.871 re f Q endstream endobj Well, this is a minimal sample, but my real document is much bigger. Is there any way to convert the stream to something that ConTeXt can handle directly? Many thanks for your help, Pablo -- http://www.ousia.tk

7 13

ICC profiles for \externalfigure
by Pablo Rodriguez 10 Oct '17

10 Oct '17

Dear Luigi and Hans, I have the following sample: \setupbackend [format=PDF/A-3a, intent=sRGB IEC61966-2.1, profile={sRGB.icc,default_gray.icc}, level=0] \setuptagging[state=start] \setupcolors[cmyk=no, pagecolormodel=auto] \setupexternalfigure[location=default] \startTEXpage[offset=1em, align=center] \dontleavehmode \externalfigure[cow-black] \dontleavehmode \externalfigure[cow-brown] \dontleavehmode \externalfigure[basic-figures.pdf][scale=200] \stopTEXpage \stoptext The third external figure is found at http://pdf.ousia.tk/basic-figures.pdf. I included it, since it adds a transparency group (and I guess this might be relevant). PDF/A-3a validation (http://verapdf.org) warns about XObjects not having any ICC profile. Would it be possible to add the "profile" key to \externalfigure, so that each figure may have its own profile (or the reference to the profile) added? Many thanks for your help, Pablo -- http://www.ousia.tk

3 6

How to add a font folder with local fonts?
by Ulrike Fischer 10 Oct '17

10 Oct '17

How can I add a simple folder (not a texmf tree) with opentype or truetype fonts to the search path of context? I have tried with a local texmfcnf.lua and return { content = { variables = { OPENTYPEFONTS = ".;D:/myfonts//;$TEXMF/fonts/{data,opentype}//;$OSFONTDIR", }, }, } but while `mtxrun --expand-var` reports the new value the folder is ignored when I run `mtxrun --script fonts --reload`. (Side remark: I found some small problems in mtxrun while testing: mtxrun and also the wiki give as an example mtxrun --script font --list somename but correct would imho be mtxrun --script fonts --list somename Also I would have expected that "mtxrun --script base --expand-var VAR" works, but actually I needed "mtxrun --expand-var VAR".) -- Ulrike Fischer http://www.troubleshooting-tex.de/

4 8

Strange behavior with TikZ
by Fabrice Couvreur 10 Oct '17

10 Oct '17

Hello, If I put any image, there is no problem : the title of the section is in color and the text in black. With a graphic made with TikZ, the title and the text are in color. Thank you for your help. Fabrice \usemodule[tikz] \usemodule [graph] \usemodule[pgfplots] \pgfplotsset{compat=newest} \definecolor[Mycolor][c=.6,m=0.8,y=0,k=0] \unexpanded\def\interff#1#2{\math{\left[#1\,;#2\right]}} \setuphead [section] [textcommand=, color=magenta, style=] \starttext \startsection[title={Résoudre graphiquement une équation \math{f(x)=g(x)}},sectionsegments=section,color=magenta] \placefigure[none,right]{}{ \hbox{\switchtobodyfont[8pt] \starttikzpicture[/pgf/declare function={f(\x)=\x^2-3;},/pgf/declare function={g(\x)=-\x^2+2*\x+1;}] \startaxis[ restrict x to domain=-3:3, xmax=3, xmin=-3, restrict y to domain=-5:4, ymax=4, ymin=-5, x=1cm, y=0.5cm, axis x line = middle, axis y line = middle, axis line style = thick, major grid style=Mycolor, minor grid style=Mycolor, grid=both, xtick={-2,...,2}, ytick={-4,...,3}, extra x ticks={-3,3}, extra x tick label={\null}, extra y ticks={-5,4}, extra y tick label={\null}, extra tick style={tick style={draw=none}}, every tick/.style={ black, thick, }, y tick label style={ /pgf/number format/1000 sep={} }, xlabel=$x$,ylabel=$y$, every axis x label/.style={ at={(ticklabel* cs:1.01)}, anchor=west, }, every axis y label/.style={ at={(ticklabel* cs:1.01)}, anchor=south, }, samples=2000, >=stealth, ] \addplot[only marks,mark=x,color=black,mark options={scale=1.5}, thick] table[x=Nombre,y=Valeur]{ Nombre Valeur -1 -2 2 1 } ; \addplot [smooth,domain=-1.5:2.5, thick,magenta] {f(x)} ; \addplot [smooth,domain=-1.5:2.5, thick,green] {g(x)} ; \node[above left,green] at (2,2) {\math{{\cal C}_g}} ; \node[below right,magenta] at (1.5,-1) {\math{{\cal C}_f}} ; \node[below left ] at (-0.1,-0.1) {\math{0}} ; \node[fill=black,circle,scale=0.4,magenta] at (-1.5,{f(-1.5)}){} ; \node[fill=black,circle,scale=0.4,magenta] at (2.5,{f(2.5)}){} ; \node[fill=black,circle,scale=0.4,green] at (-1.5,{g(-1.5)}){} ; \node[fill=black,circle,scale=0.4,green] at (2.5,{g(2.5)}){} ; \stopaxis \stoptikzpicture}} \input knuth \stopsection \stoptext

4 8

Question about enumerations/before/after
by Weber, Matthias 09 Oct '17

09 Oct '17

Dear all, I have something like \defineenumeration [test] [text={Test:}, headstyle=bold, number=no, before={\startcolor[red]}, after={\stopcolor}, style=normal, title=no ] \starttext \input{knuth} \starttest \input{tufte} \stoptest \input{knuth} \stoptext When I comment out the before/after, I get paragraph breaks before and after the enumeration. How can I have them with the before/after? Thanks, Matthias

3 3

Lua problem with tagging or setups
by Rik Kabel 09 Oct '17

09 Oct '17

Consider the following almost-minimal example: \setuptagging [state=start] \setuppapersize [A6] \setupexternalfigures[location=default] \definemakeup [cover4][page=left,doublesided=no] \definelayer [isbn][width=\pagewidth,height=\pageheight] \define \Title {A Primer on Omphaloskepsis} \startsetups [placeisbn] \setlayer [isbn][preset=rightbottom,hoffset=5mm,voffset=5mm] {\externalfigure[cow.pdf][width=3cm]} \stopsetups \starttext \setupbackgrounds [page][setups=placeisbn,background=isbn] \startmakeup [cover4] \scale [width=\textwidth] {\red \Title} \stopmakeup \stoptext For me (Win64, current standalone beta), compilation halts with: lua error > lua error on line 4 in file C://Users/rik/Desktop/xxx.tex: ...ext/tex/texmf-context/tex/context/base/mkiv/back-exp.lua:823: attempt to index local 'spec' (a nil value) stack traceback: ...ext/tex/texmf-context/tex/context/base/mkiv/back-exp.lua:823: in function <...ext/tex/texmf-context/tex/conte xt/base/mkiv/back-exp.lua:818> (It always points to line 4 of the file, no matter the file.) When the halt is answered with a CR, the processing runs to completion with no apparent errors. When the first line is removed, or the state set to stop, compilation completes normally. When the content of the setup (the two-line \setlayer) is moved out of the setup, compilation completes normally (without regard to tagging). (I use a setup here because, in the real work on which this is based, there are other items in the layer that cannot be properly handled until after \starttext processing. -- Rik

3 3

abbreviations: \infull always in small caps
by Henning Hraban Ramm 09 Oct '17

09 Oct '17

Ahoi, I’m trying to employ the synonyms mechanism for abbreviations, as documented: \setupsynonyms [style=italic, headstyle=bold, titlestyle=normal, synonymstyle=normal] \abbreviation{Abt.}{Abteilung} \abbreviation{ADN}{Allgemeiner Deutscher Nachrichtendienst} \abbreviation{AFL}{American Federation of Labor} \abbreviation{ANC}{African National Congress} \abbreviation{AV}{Auslandsvertretung} \abbreviation{BArch}{Bundesarchiv} \starttext \placelistofabbreviations[criterium=all] \infull{AV} \infull{AFL} \stoptext The result of \infull is always in small caps, and I don’t like that. I couldn’t find its definition in the source* nor a setup command. * http://source.contextgarden.net/tex/context/base/mkiv/strc-syn.mkiv?search=… Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

5 11

Setting style for \mfunction
by Aditya Mahajan 09 Oct '17

09 Oct '17

Hi, In the past, it was possible to use the text font for math functions using \setupmathematics[style=normal] https://mailman.ntg.nl/pipermail/ntg-context/2015/082212.html However, that does not work now. Here is a minimal example: \usetypescriptfile[euler] \definetypeface[mainfont][rm][serif][pagella][default] \definetypeface[mainfont][mm][math] [pagellaovereuler][default] \definetypeface[mainfont][tt][mono] [dejavu][default] [rscale=0.8, features=none] \setupbodyfont[mainfont] \setupmathematics[lcgreek=normal, ucgreek=normal, default=normal] \setupmathematics[functionstyle=normal] \starttext $sin$ vs $\sin$ \stoptext Notice that $\sin$ prints $normalsin$. If I change to `function=\tf`, even then $\sin$ uses mathrm font rather than textrm font. How do I get textrm for math functions? Thanks, Aditya

2 2

struggling with font features (sc, os)
by Henning Hraban Ramm 08 Oct '17

08 Oct '17

Hi font wizards, I’m trying to get rid of \sc and \os, but font features are unreliable... With default LM, only the classical variants work. With termes, heros, iwona, antykwa OTF sc and os work, while classical \sc and \os don’t. With gentium both sc work, while the font doesn’t have onum. Libertine works in all variants, Dejavu in none. Alegreya has single sc fonts, so only \sc works. Adobe Jenson Pro has smcp and onum features, but they only work with \definedfont. WTF? While I can understand most of this, the last one is confusing. What could be wrong? And how can I map an SC font to smcp feature of the Roman font? \definefontfeature[default] [mode=node,script=latn,language=dflt,kern=yes,liga=yes,lnum=yes] \mainlanguage[de] \setupbodyfont[termes,12pt] \definefontfeature[f:smallcaps][smcp=yes] \definefontfeature[f:oldstyle][onum=yes,lnum=no] \def\Sample{Hämbürgefonßy123\&-} \starttext \showbodyfont normal: {\rm\Sample}{\ss\Sample}{\tt\Sample} {\tex{os}: \os{\rm\Sample}{\ss\Sample}{\tt\Sample}} {\feature[+][f:oldstyle] otf os: {\rm\Sample}{\ss\Sample}{\tt\Sample}} {\tex{sc}: \sc{\rm\Sample}{\ss\Sample}{\tt\Sample}} {\feature[+][f:smallcaps] otf sc: {\rm\Sample}{\ss\Sample}{\tt\Sample}} {\definedfont[Serif*smallcaps at 16pt]\Sample} {\definedfont[Sans*smallcaps at 16pt]\Sample} {\definedfont[Mono*smallcaps at 16pt]\Sample} \stoptext Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

1 0

Fwd: ligature exceptions
by Henning Hraban Ramm 08 Oct '17

08 Oct '17

Am 2017-09-28 um 01:16 schrieb Hans Hagen <pragma(a)wxs.nl>: > On 9/27/2017 11:08 PM, Thomas A. Schmitz wrote: >> On 09/27/2017 10:25 PM, Henning Hraban Ramm wrote: >>> Thank you for the suggestion. >>> I tried >>> >>> \replaceword[eka][Auflage][Au{fl}age] >>> \setreplacements[eka] >>> >>> and even converted the german wordlist from the selnolig package, but it doesn’t help. >> Works here. You'll have to make a real example. > I'll add an extra (simple) definition format: > > \replaceword [eka] [Au{fl}age Shiff{f}ahrt] > > I leave it to others to collect (reasonable) lists of words. We can these to the distribution then. Thank you very much, it works now. Here’s* the converted German wordlist from the selnolig package, still in the "old" single word syntax. I just \input it in my environment. I didn’t measure, but I don’t experience a delay - great! I’ll also add a wiki page about ligatures.** *) The message didn’t make it to the list on the first try, because the attachment was too big. It’s now at http://wiki.contextgarden.net/images/b/be/nolig-german-wordlist.tex **) http://wiki.contextgarden.net/Ligatures Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

3 11

Fwd: Re: ligature exceptions
by Hans Hagen 08 Oct '17

08 Oct '17

(btw, gmx addresses reject our mails as they interpret mail headers in a weird way which makes it impossible to use an internal mail server so those with gmx addresses never get replies) -------- Forwarded Message -------- Subject: Re: [NTG-context] ligature exceptions Date: Sun, 8 Oct 2017 13:08:42 +0200 From: Hans Hagen <pragma(a)wxs.nl> To: Pablo Rodriguez <oinos(a)gmx.es> On 10/8/2017 10:37 AM, Pablo Rodriguez wrote: > On 10/08/2017 12:22 AM, Hans Hagen wrote: >> You need to define features before fonts get defined because we share >> font definitions and their features as much as possible >> >> \startluacode >> fonts.handlers.otf.addfeature { >> name = "kernligatures", >> type = "kern", >> data = { >> f = { i = 50, l = 50 }, >> } >> } >> \stopluacode > > Many thanks for your reply, Hans. > > I almost get it all ;-), but what is the "i" variable? > > Setting different values or even removing doesn’t make any difference > (at least, that I notice). if fl is bad that one can bet that fi is bad too (and probably also ff) ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 1

Problem installing standalone on linux-64
by Mikael P. Sundqvist 07 Oct '17

07 Oct '17

Hi! When trying to install a standalone I get into trouble. First I run wget http://minimals.contextgarden.net/setup/first-setup.sh Then: mickep@cantor:/opt/ConTeXt$ sudo sh ./first-setup.sh --modules=all receiving incremental file list sent 29 bytes received 155 bytes 122.67 bytes/sec total size is 8,840,293 speedup is 48,045.07 mtxrun | forcing cache reload resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/usr/matematik/mickep/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on weird path '/opt/ConTeXt/bin' from specification 'selfautoloc:' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on weird path '/opt/ConTeXt' from specification 'selfautodir:' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/ConTeXt/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on weird path '/opt' from specification 'selfautoparent:' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/opt/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/usr/matematik/mickep/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on weird path '/opt/ConTeXt/bin' from specification 'selfautoloc:' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf-local/web2c' from specification 'selfautoloc:/share/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf-dist/web2c' from specification 'selfautoloc:/share/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/share/texmf/web2c' from specification 'selfautoloc:/share/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/texmf-local/web2c' from specification 'selfautoloc:/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/texmf-dist/web2c' from specification 'selfautoloc:/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/bin/texmf/web2c' from specification 'selfautoloc:/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on weird path '/opt/ConTeXt' from specification 'selfautodir:' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/share/texmf-local/web2c' from specification 'selfautodir:/share/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/share/texmf-dist/web2c' from specification 'selfautodir:/share/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/share/texmf/web2c' from specification 'selfautodir:/share/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/texmf-local/web2c' from specification 'selfautodir:/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/texmf-dist/web2c' from specification 'selfautodir:/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/ConTeXt/texmf/web2c' from specification 'selfautodir:/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '$SELFAUTOGRANDPARENT/texmf-local/web2c' from specification '$SELFAUTOGRANDPARENT/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on weird path '/opt' from specification 'selfautoparent:' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/share/texmf-local/web2c' from specification 'selfautoparent:/share/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/share/texmf-dist/web2c' from specification 'selfautoparent:/share/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/share/texmf/web2c' from specification 'selfautoparent:/share/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/opt/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated./bin/mtx-update.lua:127: unexpected symbol near '.' When you want to use context, you need to initialize the tree by typing: . /opt/ConTeXt/tex/setuptex in your shell or add "/opt/ConTeXt/tex/texmf-linux-64/bin" to PATH variable if you want to set it permanently. This can usually be done in .bashrc, .bash_profile (or whatever file is used to initialize your shell). Any ideas on how to proceed? /Mikael

2 2

Troubleshooting pdf bookmarks
by Mari Voipio 05 Oct '17

05 Oct '17

Hello all, I've got a problem with pdf bookmarks and I don't know how to troubleshoot it. I first made a test file in a test folder with all the correct components and it ("bookmark_test") works perfectly with all the enviroment files and component files. However, when I copied the working product file to the product folder ("prd-serv"), fixed the links and ran ConTeXt, I didn't get bookmarks. Reference links show up in TOC and text, so there's some kind of interactivity, but no bookmarks. I've tried to figure out from logs (attached) what eats my bookmarks in the product folder, but without much success. I've also tried excluding components and environment files in different combinations, but that doesn't seem to help, so I haven't been able to isolate the cause of the problem. Are there some commands that can be used to troubleshoot interactivity/pdf bookmarks? \tracesomething, maybe? Best Regards, Mari

5 8

Another question to structured trees for linguistics
by Ursula Hermann 05 Oct '17

05 Oct '17

Hi everybody! I have another question to this thread: if I need a structured tree for lingustics, i mean a structured tree with senteces, can I use also mp-trees? I ask, because at Ctan I found a package called "qtrees". So in this package ist called \Tree and then there comes the following: [.S This [.VP [.V is ]\roof{a simple tree}.NP ] ] for example . Or how would I write it in metapost? Can somebody help me? Uschi

1 0

compiling the mkiv-publications manual
by MF 04 Oct '17

04 Oct '17

Hello list, I'm trying to compile the mkiv-publications manual from the ConTeXt distribution. Running context mkiv-publications stops with the error: ... tex error > tex error on line 58 in file publications- database.tex: ! Undefined control sequence l.58 \startBTX ... 55 56 A \BIBTEX\ file entry looks like this: 57 58 >> \startBTX 59 @Article {sometag, 60 author = "An Author and Another One", 61 title = "A hopefully meaningful title", 62 journal = maps, ... maybe I need to specify some options in the command line, to make ConTeXt aware of the \startBTX macro. Greetings, Massi

3 6

flowwcharts etc.
by John Culleton 04 Oct '17

04 Oct '17

A decade or so ago I read about a program callable from within Context that would create flowcharts etc. Was this Metapost? Or was it a different program? John Culleton

4 3

Stixtwo spacing between upright integrals and lower limits
by Mikael P. Sundqvist 04 Oct '17

04 Oct '17

Dear Hans (and others), In the tex stackexchange chat today we were discussing the stix two fonts, and in particular the spacing between the integral sign and the lower bound. It is known that this was way to big before (see https://tex.stackexchange.com/q/327710/52406) but it seems that it is still too big, at least if one uses the upright version. Judge yourself from the example file at the end of this email (result attached). I made a bug report (see https://sourceforge.net/p/stixfonts/tracking/95/) but Ulrike Fischer said that it could take time to get it fixed, and that you Hans made a fix for another bug ( https://sourceforge.net/p/stixfonts/tracking/86/) in the fontloader. Can you do that for this one as well? During the discussion Harald Hanche-Olsen came up with the following "quick fix" for LuaLaTeX: \usepackage{luatexbase,luacode} \begin{luacode} local patch_stixmath = function (fontdata) if fontdata.psname == "STIXTwoMath" then fontdata.characters[983352]["italic"]=3*fontdata.characters[983352]["italic"] end end luatexbase.add_to_callback ( "luaotfload.patch_font", patch_stixmath, "change_stixmath" ) \end{luacode} I don't know if this is the way to go, but I thought I should include it. Best regards, Mikael %%% TEST FILE %%% \setupbodyfont[stixtwo] \setupmathematics[ integral=nolimits, ] \startTEXpage[offset=3bp] With slanted integral: \startformula \int_0^\pi \sin x\,dx=2. \stopformula \setupmathematics[stylealternative={upright}] With upright integral: \startformula \int_0^\pi \sin x\,dx=2. \stopformula \stopTEXpage

2 1

sql / swiglib doesnt find lib
by Michael Eidenbenz 02 Oct '17

02 Oct '17

Hello, I'm experimenting with the SQL interface in context. My testfile compiles with: utilities.sql.setmethod("client"), but I don't manage to setup the swiglib method. Following the instruction described in swiglib-mkiv.pdf, I compiled the mysql library for osx, and put it into: context/tex/texmf-osx-64/bin/lib/luatex/lua/swiglib/mysql/core.dylib But I get this error: swiglib > unknown: 'swiglib.mysql.core' my texmf.cnf has the line CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua// Thanks!

2 4

size of footnote numbers
by Henning Hraban Ramm 30 Sep '17

30 Sep '17

Ahoi, in my current book there are some quotations typeset in a smaller type (via \switchtobodyfont in a defined startstop). Now the author insists that their footnote numbers should have the same size as in the body text. Since the footnotes are mostly source annotations at the end, it makes some sense. What would be the best way to achieve this? Here’s my setup: \setupbodyfont [alegreya,rm,11pt] % usual font size \startsetups[myQuotation] \setupwhitespace[none] \setupnarrower[left=2em,right=2em] \switchtobodyfont[rm,10pt] % I guess I should change the footnote number font size here? \stopsetups \definestartstop[myQuotation][ setups=myQuotation, before={ \testpage[2] \startnarrower[left,right] \noindent}, after={\stopnarrower \indenting[next]}] Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

3 2

line correction
by MF 29 Sep '17

29 Sep '17

Hello list, I would like ConTeXt to snap normal text to grid after a quotation. This example does not work: -------------- \setupquotation[before={\switchtobodyfont[9pt]}] \starttext \showgrid \input knuth \startlinecorrection[halfline] \startquotation \input sapolsky \stopquotation \stoplinecorrection \input knuth \stoptext -------------- If I prepend a \setuplayout[grid=yes], it works, but grid snapping introduces also other side effects I don't want (i.e. tall formulas inside text taking too much vertical space). I would like the halfline spaces before and after the quotation to shrink or stretch a bit to the nearest multiple of the main text line height. Is there an automatic way to get the normal text "return" on the grid after a quotation without turning on a global grid snapping? Thanks, Massi

6 13

ligature exceptions
by Henning Hraban Ramm 29 Sep '17

29 Sep '17

Hi all, I know I can break ligatures with \/, like Auf\/lage, but is there a general dictionary approach, like \hyphenation{} ? Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

9 18

synctex, TeXShop and \input files
by Otared Kavian 29 Sep '17

29 Sep '17

Hi all, Some time ago Hans added a new synctex command which seemed to work quite well: on a Mac running MacOS and TeXShop I could for instance click on a sentence in the PDF file produced by ConTeXt and the sentence was highlighted in the source file, even it were part of an \input file. For instance after typesetting the file: %%% begin synctex-example.tex \setupsynctex[state=start,method=max] \starttext \input knuth.tex \hairline \input ward.tex \stoptext %%% end synctex-example.tex I could click on the sentence « The separation of any of these » in the PDF file and the file knuth.tex was opened and those words highlighted. In the recent versions of ConTeXt (the latest being ConTeXt version 2017.09.25 19:19 MKIV) this does not seem to work anymore. As a matter of fact even when the source file is not an \input file, the syncing between the PDF and the source does not work anymore. So my questions are the following (the « or » below is a mathematical one…): 1) Has the \setupsynctex command changed recently? 2) Or am I having troubles with the latest version of TeXShop (version 3.88). 3) Or is there an issue with the MacOS I am using (version 10.13 Beta). Thanks in advance for any kind of help. Best regards: OK

2 4

Re: [NTG-context] Module Update from GIT URL Fails
by Christoph Reller 28 Sep '17

28 Sep '17

On Wed, 27 Sep 2017 11:55:06 +0200 Taco Hoekwater <taco(a)elvenkind.com> wrote: > > Alright, I think I have this figured out now. You *have to* use the https > protocol, but then it should work. > > https://bitbucket.org/philexander/context-highlight.git > > You cannot use any git protocol except (anonymous) https. If you try > any other protocol, the 'git clone' command that is started by the > webserver > will attempt to do an interactive input query and subsequently fail. > > I have updated help.html with the above explanation as well. > > Best wishes, > Taco > Thank you Taco! With the https protocol the upload of a new version indeed works. Thank you also for updating the help page. Regards, Christoph

1 0

minor bugfix
by Lawrence 27 Sep '17

27 Sep '17

Hi mailing list, Got another bug report for you. I was perusing the mkiv source files, and I noticed that: in the file "grph-inc.mkiv", lines 68 and 69 should have commas at the end of the line. (On noticing this I had a quick search through the rest of the source files for similar errors. I don't think there are any other such typos.) For reference, my context version is hot off the presses, "ConTeXt ver: 2017.09.25 19:19 MKIV beta fmt: 2017.9.27" Best regards, Lawrence

3 2

errors
by Hans Hagen 27 Sep '17

27 Sep '17

Hi, At the context meeting there was a bit of discussion about error messages. I looked into that a bit an ddecided to provide a summay option. The following text: \enabledirectives[logs.errors] % context --errors \setupinteraction[state=start] \environment is-not-there \usemodule[x][foobar] \starttext \chapter[foo]{foo} \in{foo}[foo] \in{bar}[bar] \chapter[bar]{bar} \in{foo}[foo] \in{bar}[bar] \xmlload{main}{crapcrap.xml}{} oeps \in{foo}[foo-a] oeps \char 999 \par oeps \in{foo}[foo-a] oeps \char 995 \par oeps \in{foo}[foo-b] oeps \char 991 \par \externalfigure[dummy] \dorecurse {10} { \samplefile{sapolsky} {\sl \char 999 \char 995 \char 991} {\bf \char 999 \char 995 \char 991} {\bfa \char 999 \char 995 \char 991} {\bfb \char 999 \char 995 \char 991} {\bfc \char 999 \char 995 \char 991} \par } \stoptext will produce (at the end of a run): system > start missing files system > tex is-not-there system > stop missing files modules > start missing modules modules > x-foobar modules > stop missing modules lxml > start problematic xml files lxml > 1 crapcrap.xml lxml > stop problematic xml files references > start missing references references > 4 [][foo-a] references > 2 [][foo-b] references > stop missing references fonts > start missing characters: c:/data/develop/tex-context/tex/texmf/fonts/opentype/public/lm/lmroman10-bold.otf fonts > 90 U+003DF ϟ GREEK SMALL LETTER KOPPA fonts > 90 U+003E3 ϣ COPTIC SMALL LETTER SHEI fonts > 90 U+003E7 ϧ COPTIC SMALL LETTER KHEI fonts > stop missing characters fonts > start missing characters: c:/data/develop/tex-context/tex/texmf/fonts/opentype/public/lm/lmroman12-bold.otf fonts > 10 U+003DF ϟ GREEK SMALL LETTER KOPPA fonts > 10 U+003E3 ϣ COPTIC SMALL LETTER SHEI fonts > 10 U+003E7 ϧ COPTIC SMALL LETTER KHEI fonts > stop missing characters fonts > start missing characters: c:/data/develop/tex-context/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf fonts > 1 U+003DF ϟ GREEK SMALL LETTER KOPPA fonts > 1 U+003E3 ϣ COPTIC SMALL LETTER SHEI fonts > 1 U+003E7 ϧ COPTIC SMALL LETTER KHEI fonts > stop missing characters fonts > start missing characters: c:/data/develop/tex-context/tex/texmf/fonts/opentype/public/lm/lmromanslant12-regular.otf fonts > 10 U+003DF ϟ GREEK SMALL LETTER KOPPA fonts > 10 U+003E3 ϣ COPTIC SMALL LETTER SHEI fonts > 10 U+003E7 ϧ COPTIC SMALL LETTER KHEI fonts > stop missing characters graphics > start missing figures graphics > dummy graphics > stop missing figures In order to get the missing characters message we currently need to say \enabletrackers[fonts.missing] (which btw has some options, see manual) but in a next update of luatex you will get the log without this too. Specially for Taco there is: \enabledirectives[logs.errors=missing characters] which will quit with an exit state 1 (given that he runs an upcoming version of luatex). It was not that trivial to achieve this but at least it's there (soon). Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 2

Re: [NTG-context] Module Update from GIT URL Fails
by Christoph Reller 27 Sep '17

27 Sep '17

On Mon, 25 Sep 2017 10:57:48 +0200 Taco Hoekwater <taco(a)elvenkind.com > wrote: > > I don't seem to be able to update my ConTeXt module "high". I try to > create a new version by entering the URL of my git repository > (git@bitbucket.org:philexander/context-highlight.git) into the GIT URL > field and clicking submit. But the website then tells me "Change to > temporary directory failed". What am I doing wrong? > > Not you, me. Something was wrong with the directory permissions on the > server. It should > be fixed now, but I cannot test myself. Please let me know whether it > works ok now. > Dear Taco, Thank you for your effort. Unfortunately, I still get the same error "Change to temporary directory failed". Could you please be so kind and check once more what could be wrong with the server. On Mon, 25 Sep 2017 21:01:18 -0400 (EDT) Aditya Mahajan <adityam(a)umich.edu > wrote: > > I try to create > > a new version by entering the URL of my git repository > > (git@bitbucket.org:philexander/context-highlight.git) > > into the GIT URL field > > OT: Since you haven't uploaded your module yet, might I suggest that you > change the name to t-highlight instead of t-high. That will be in line > with the ConTeXt convention of using full names instead of abbreviations. > > Thanks, > Aditya > Thank you for this hint, Aditya. I have renamed the module and am awaiting that the Update from GIT URL works again. Kind regards to both of you, Christoph

2 1

index and footnotes colliding
by Henning Hraban Ramm 27 Sep '17

27 Sep '17

Researching my index problems I came upon a strange one: \starttext \input tufte\index{Tufte}\footnote{\input knuth} \placeindex \stoptext Here the index collides with the footnote. WTF? My other question regarding sorting of index entries that contain macros is still open. Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

1 0

Broken mathalign in 2017.05.15
by Stephens, Kenny 27 Sep '17

27 Sep '17

\starttext \startformula \startmathalignment[m=2,distance=4em] \NC \text{slope}_A \NC = 0 \NC \text{slope}_B \NC = \frac{1}{2} \NR \stopmathalignment \stopformula \stoptext In ConTeXt 2017.05.15 (shipped with TexLive 2017), the second column is formatted as text rather than math. The result gives 'slope_B' rather than placing B as a subscript. Online and with 2016.05.17 (shipped with TexLive 2016), the second column is formatted correctly as math.

2 1

itemtag
by Hans Hagen 26 Sep '17

26 Sep '17

Hi, At the context meeting there was some request / mentioning of a itemized tabulate. In fact we already have \itemtag. I've now added \NI too. \starttext \startitemize[n] \starttabulate[|||||] \NC p \NC \itemtag \NC q \NC r \NC \NR \NC p \NC \itemtag \NC q \NC r \NC \NR \NC p \NC \itemtag \NC q \NC r \NC \NR \NC p \NC \itemtag \NC q \NC r \NC \NR \stoptabulate \stopitemize \startitemize[n] \starttabulate[|||||] \NI x \NC y \NC z \NC \NR \NI x \NC y \NC z \NC \NR \NI x \NC y \NC z \NC \NR \NI x \NC y \NC z \NC \NR \stoptabulate \stopitemize \startitemize[n] \starttabulate[|||||] \NI b \NC c \NC d \NC \NR \NC a \NI c \NC d \NC \NR \NC a \NC b \NI d \NC \NR \NC a \NC b \NC c \NI \NR \stoptabulate \stopitemize \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

3 2

Module Update from GIT URL Fails
by Christoph Reller 26 Sep '17

26 Sep '17

Dear Taco, Moica has told me that you are the maintainer of modules.contextgarden.net. Is this correct? I don't seem to be able to update my ConTeXt module "high". I try to create a new version by entering the URL of my git repository (git@bitbucket.org:philexander/context-highlight.git) into the GIT URL field and clicking submit. But the website then tells me "Change to temporary directory failed". What am I doing wrong? By the way: My web browser tells me that the certificate of https://modules.contextgarden.net has expired. Kind regards, Christoph

3 2

Behaviour of \overbar in math mode
by Sebastian L. 26 Sep '17

26 Sep '17

Hi fellas, after some recent beta change some of my documents differ in output compared to past builds, when it comes to \overbar command in math mode. MWE: \starttext \overbar{1} $\overbar{1}$ \stoptext In math mode the example looks broken... Did I miss a change; is there a new method for overbars in math mode? Greetings, Sebastian

2 4

how to get simplefonts to work as intended?
by Floris van Manen 23 Sep '17

23 Sep '17

While trying to use the simplefonts module again, the generated output is somewhat confusing. Before falling back to the default font, it generates a lot of error messages (2.5 pages) in the pdf. Can someone provide a hint as how to solve this issue? Kind regards, .Floris this is the tex file \setupbodyfontenvironment[default][em=italic] \usemodule[simplefonts][size=12pt] \setmainfont[TeX Gyre Termes] \setsansfont[TeX Gyre Heros] \setmonofont[TeX Gyre Cursor] \starttext Lorem ipsum dolor sit amet \stoptext this is the log: mtx-context | run 1: luatex --fmt="/Applications/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="error" --lua="/Applications/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="/Users/vm/Desktop/error.tex" --c:input="/Users/vm/Desktop/error.tex" --c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv" This is LuaTeX, Version 1.05.0 (TeX Live 2017) system commands enabled. open source > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv' system > system > ConTeXt ver: 2017.09.15 20:03 MKIV beta fmt: 2017.9.22 int: english/english system > system > 'cont-new.mkiv' loaded open source > level 2, order 2, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' close source > level 2, order 2, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > files > jobname 'error', input '/Users/vm/Desktop/error', result 'error' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > level 2, order 3, name '/Users/vm/Desktop/error.tex' resolvers > modules > 'simplefonts' is loaded open source > level 3, order 4, name '/Applications/ConTeXt/tex/texmf-modules/tex/context/third/simplefonts/t-simplefonts.mkiv' loading > ConTeXt User Module / Simplefonts resolvers > lua > loading file '/Applications/ConTeXt/tex/texmf-modules/tex/context/third/simplefonts/t-simplefonts.lua' succeeded close source > level 3, order 4, name '/Applications/ConTeXt/tex/texmf-modules/tex/context/third/simplefonts/t-simplefonts.mkiv' fonts > defining > font with asked name 'unknown' is not found using lookup 'file' fonts > defining > unknown font 'unknown', loading aborted fonts > defining > unable to define 'unknown' as 'simplefonts:1-12pt-rm-tf-0--0' fonts > defining > font with asked name 'unknown' is not found using lookup 'file' fonts > defining > unknown font 'unknown', loading aborted fonts > defining > unable to define 'unknown' as 'simplefonts:2-12pt-rm-tf-0--0' fonts > defining > font with asked name 'unknown' is not found using lookup 'file' fonts > defining > unknown font 'unknown', loading aborted fonts > defining > unable to define 'unknown' as 'simplefonts:3-12pt-rm-tf-0--0' Overfull \hbox (10.40045pt too wide) in paragraph at lines 4--1 [][Serif][name:texgyretermesregular][fallbacks=mainfontregularfallbacks,features=mainfontregularfeatures][SerifItalic][name:texgyretermesitalic][fallbacks=mainfontitalicfallbacks,features=mainfontitalicfeatures][SerifSlanted][name:texgyretermesitalic][fallbacks=mainfontslantedfallbacks,features=mainfontslantedfeatures][SerifBold][name:texgyretermesbold][fallbacks=mainfontboldfallbacks,features=mainfontboldfeatures][SerifBoldItalic][name:texgyretermesbolditalic][fallbacks=mainfontbolditalicfallbacks,features=mainfontbolditalicfeatures][SerifBoldSlanted][name:texgyretermesbolditalic][fallbacks=mainfontboldslantedfallbacks,features=mainfontboldslantedfeatures][SerifCaps][name:texgyretermesregular][fallbacks=mainfontcapsfallbacks,features=mainfontcapsfeatures][SerifItalicCaps][name:texgyretermesregular][fallbacks=mainfontitaliccapsfallbacks,features=mainfontitaliccapsfeatures][SerifSlantedCaps][name:texgyretermesregular][fallbacks=mainfontslantedcapsfallbacks,features=mainfontslantedcapsfeatures][SerifBoldCaps][name:texgyretermesregular][fallbacks=mainfontboldcapsfallbacks,features=mainfontboldcapsfeatures][SerifBoldItalicCaps][name:texgyretermesregular][fallbacks=mainfontbolditaliccapsfallbacks,features=mainfontbolditaliccapsfeatures][SerifBoldSlantedCaps][name:texgyretermesregular][fallbacks=mainfontboldslantedcapsfallbacks,features=mainfontboldslantedcapsfeatures][Sans][name:texgyretermesregular][fallbacks=mainfontregularfallbacks,features=mainfontregularfeatures][SansItalic][name:texgyretermesitalic][fallbacks=mainfontitalicfallbacks,features=mainfontitalicfeatures][SansSlanted][name:texgyretermesitalic][fallbacks=mainfontslantedfallbacks,features=mainfontslantedfeatures][SansBold][name:texgyretermesbold][fallbacks=mainfontboldfallbacks,features=mainfontboldfeatures][SansBoldItalic][name:texgyretermesbolditalic][fallbacks=mainfontbolditalicfallbacks,features=mainfontbolditalicfeatures][SansBoldSlanted][name:texgyretermesbolditalic][fallbacks=mainfontboldslantedfallbacks,features=mainfontboldslantedfeatures][SansCaps][name:texgyretermesregular][fallbacks=mainfontcapsfallbacks,features=mainfontcapsfeatures][SansItalicCaps][name:texgyretermesregular][fallbacks=mainfontitaliccapsfallbacks,features=mainfontitaliccapsfeatures][SansSlantedCaps][name:texgyretermesregular][fallbacks=mainfontslantedcapsfallbacks,features=mainfontslantedcapsfeatures][SansBoldCaps][name:texgyretermesregular][fallbacks=mainfontboldcapsfallbacks,features=mainfontboldcapsfeatures][SansBoldItalicCaps][name:texgyretermesregular][fallbacks=mainfontbolditaliccapsfallbacks,features=mainfontbolditaliccapsfeatures][SansBoldSlantedCaps][name:texgyretermesregular][fallbacks=mainfontboldslantedcapsfallbacks,features=mainfontboldslantedcapsfeatures][Mono][name:texgyretermesregular][fallbacks=mainfontregularfallbacks,features=mainfontregularfeatures][MonoItalic][name:texgyretermesitalic][fallbacks=mainfontitalicfallbacks,features=mainfontitalicfeatures][MonoSlanted][name:texgyretermesitalic][fallbacks=mainfontslantedfallbacks,features=mainfontslantedfeatures][MonoBold][name:texgyretermesbold][fallbacks=mainfontboldfallbacks,features=mainfontboldfeatures][MonoBoldItalic][name:texgyretermesbolditalic][fallbacks=mainfontbolditalicfallbacks,features=mainfontbolditalicfeatures][MonoBoldSlanted][name:texgyretermesbolditalic][fallbacks=mainfontboldslantedfallbacks,features=mainfontboldslantedfeatures][MonoCaps][name:texgyretermesregular][fallbacks=mainfontcapsfallbacks,features=mainfontcapsfeatures][MonoItalicCaps][name:texgyretermesregular][fallbacks=mainfontitaliccapsfallbacks,features=mainfontitaliccapsfeatures][MonoSlantedCaps][name:texgyretermesregular][fallbacks=mainfontslantedcapsfallbacks,features=mainfontslantedcapsfeatures][MonoBoldCaps][name:texgyretermesregular][fallbacks=mainfontboldcapsfallbacks,features=mainfontboldcapsfeatures][MonoBoldItalicCaps][name:texgyretermesregular][fallbacks=mainfontbolditaliccapsfallbacks,features=mainfontbolditaliccapsfeatures][MonoBoldSlantedCaps][name:texgyretermesregular][fallbacks=mainfontboldslantedcapsfallbacks,features=mainfontboldslantedcapsfeatures][Handwriting][name:texgyretermesregular][fallbacks=mainfontregularfallbacks,features=mainfontregularfeatures][Calligraphy][name:texgyretermesregular][fallbacks=mainfontregularfallbacks,features=mainfontregularfeatures] \3>simplefonts:3-12pt-mm-mb--1 [Serif][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fontreg-u-lar-fall-backs,fea-tures=sans- Overfull \hbox (10.49248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontreg-u-lar-fea-tures][Ser-i-fI-talic][name:tex-gyre-herosi-talic][fall-backs=sans-fonti-tal-ic-fall- Overfull \hbox (53.70447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs,fea-tures=sans-fonti-tal-icfea-tures][Ser-if-S-lanted][name:tex-gyre-herosi-talic][fall-backs=sans- Overfull \hbox (15.47247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-fall-backs,fea-tures=sans-fontslant-ed-fea-tures][Ser-if-Bold][name:tex-gyre-heros- Overfull \hbox (69.44846pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 bold][fall-backs=sans-font-bold-fall-backs,fea-tures=sans-font-bold-fea-tures][Ser-if-BoldItalic][name:tex- Overfull \hbox (11.27246pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-bolditalic][fall-backs=sans-font-boldital-ic-fall-backs,fea-tures=sans-font-boldital- Overfull \hbox (1.26448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 icfea-tures][Ser-if-Bold-Slanted][name:tex-gyre-heros-bolditalic][fall-backs=sans-font-bold- Overfull \hbox (18.70047pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-fall-backs,fea-tures=sans-font-bold-slant-ed-fea-tures][Ser-if-Caps][name:tex-gyre-heros- Overfull \hbox (4.76846pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 reg-u-lar][fall-backs=sans-font-caps-fall-backs,fea-tures=sans-font-caps-fea-tures][Ser-i-fI-tal-ic- Overfull \hbox (18.74847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fonti-tal-ic-caps-fall-backs,fea-tures=sans- Overfull \hbox (8.27248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-caps-fea-tures][Ser-if-S-lant-ed-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans- Overfull \hbox (37.19247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-caps-fall-backs,fea-tures=sans-fontslant-ed-caps-fea-tures][Ser-if-Bold-Caps][name:tex- Overfull \hbox (1.44446pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-caps-fall-backs,fea-tures=sans-font-bold-caps- Overfull \hbox (11.71648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fea-tures][Ser-if-BoldItal-ic-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-font-boldital- Overfull \hbox (38.06848pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-caps-fall-backs,fea-tures=sans-font-boldital-ic-caps-fea-tures][Ser-if-Bold-Slant-ed-Caps][name:tex- Overfull \hbox (16.12045pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-slant-ed-caps-fall-backs,fea-tures=sans-font-bold- Overfull \hbox (7.70847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-caps-fea-tures][Sans][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fontreg-u-lar-fall- Overfull \hbox (52.45647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs,fea-tures=sans-fontreg-u-lar-fea-tures][San-sI-talic][name:tex-gyre-herosi-talic][fall-backs=sans- Overfull \hbox (11.21248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-fall-backs,fea-tures=sans-fonti-tal-icfea-tures][SansS-lanted][name:tex-gyre-herosi- Overfull \hbox (72.24446pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 talic][fall-backs=sans-fontslant-ed-fall-backs,fea-tures=sans-fontslant-ed-fea-tures][Sans-Bold][name:tex- Overfull \hbox (13.76845pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-bold][fall-backs=sans-font-bold-fall-backs,fea-tures=sans-font-bold-fea-tures][Sans- Overfull \hbox (56.08047pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 BoldItalic][name:tex-gyre-heros-bolditalic][fall-backs=sans-font-boldital-ic-fall-backs,fea-tures=sans- Overfull \hbox (18.96448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 font-boldital-icfea-tures][Sans-Bold-Slanted][name:tex-gyre-heros-bolditalic][fall-backs=sans- Overfull \hbox (12.95247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 font-bold-slant-ed-fall-backs,fea-tures=sans-font-bold-slant-ed-fea-tures][San-sCaps][name:tex- Overfull \hbox (23.20045pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-caps-fall-backs,fea-tures=sans-font-caps-fea-tures][San- Overfull \hbox (50.47647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sI-tal-ic-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fonti-tal-ic-caps-fall-backs,fea-tures=sans- Overfull \hbox (8.63248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-caps-fea-tures][SansS-lant-ed-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans- Overfull \hbox (37.55247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-caps-fall-backs,fea-tures=sans-fontslant-ed-caps-fea-tures][Sans-Bold-Caps][name:tex- Overfull \hbox (1.44446pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-caps-fall-backs,fea-tures=sans-font-bold-caps- Overfull \hbox (12.07648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fea-tures][Sans-BoldItal-ic-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-font-boldital- Overfull \hbox (38.42848pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-caps-fall-backs,fea-tures=sans-font-boldital-ic-caps-fea-tures][Sans-Bold-Slant-ed-Caps][name:tex- Overfull \hbox (16.12045pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-slant-ed-caps-fall-backs,fea-tures=sans-font-bold- Overfull \hbox (13.31247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-caps-fea-tures][Mono][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fontreg-u-lar-fall- Overfull \hbox (58.06047pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs,fea-tures=sans-fontreg-u-lar-fea-tures][MonoItalic][name:tex-gyre-herosi-talic][fall-backs=sans- Overfull \hbox (16.81648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-fall-backs,fea-tures=sans-fonti-tal-icfea-tures][Mono-Slanted][name:tex-gyre-herosi- Overfull \hbox (77.84846pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 talic][fall-backs=sans-fontslant-ed-fall-backs,fea-tures=sans-fontslant-ed-fea-tures][MonoBold][name:tex- Overfull \hbox (125.21245pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-bold][fall-backs=sans-font-bold-fall-backs,fea-tures=sans-font-bold-fea-tures][MonoBoldItalic][name:tex- Overfull \hbox (11.27246pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-bolditalic][fall-backs=sans-font-boldital-ic-fall-backs,fea-tures=sans-font-boldital- Overfull \hbox (7.22849pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 icfea-tures][MonoBold-Slanted][name:tex-gyre-heros-bolditalic][fall-backs=sans-font-bold- Overfull \hbox (24.66447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-fall-backs,fea-tures=sans-font-bold-slant-ed-fea-tures][Mono-Caps][name:tex-gyre-heros- Overfull \hbox (2.06847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 reg-u-lar][fall-backs=sans-font-caps-fall-backs,fea-tures=sans-font-caps-fea-tures][MonoItal- Overfull \hbox (27.41248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fonti-tal-ic-caps-fall-backs,fea-tures=sans- Overfull \hbox (14.23648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-caps-fea-tures][Mono-Slant-ed-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans- Overfull \hbox (43.15648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-caps-fall-backs,fea-tures=sans-fontslant-ed-caps-fea-tures][MonoBold-Caps][name:tex- Overfull \hbox (1.44446pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-caps-fall-backs,fea-tures=sans-font-bold-caps- Overfull \hbox (17.68048pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fea-tures][MonoBoldItal-ic-Caps][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-font-boldital- Overfull \hbox (44.03249pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-caps-fall-backs,fea-tures=sans-font-boldital-ic-caps-fea-tures][MonoBold-Slant-ed-Caps][name:tex- Overfull \hbox (16.12045pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-heros-reg-u-lar][fall-backs=sans-font-bold-slant-ed-caps-fall-backs,fea-tures=sans-font-bold- Overfull \hbox (12.30447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-caps-fea-tures][Hand-writ-ing][name:tex-gyre-heros-reg-u-lar][fall-backs=sans-fontreg- Overfull \hbox (5.98047pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 u-lar-fall-backs,fea-tures=sans-fontreg-u-lar-fea-tures][Cal-lig-ra-phy][name:tex-gyre-heros-reg- Overfull \hbox (46.76044pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 u-lar][fall-backs=sans-fontreg-u-lar-fall-backs,fea-tures=sans-fontreg-u-lar-fea-tures] [Serif][name:tex- Overfull \hbox (1.90047pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-reg-u-lar][fall-backs=mono-fontreg-u-lar-fall-backs,fea-tures=mono-fontreg-u-lar- Overfull \hbox (11.3805pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fea-tures][Ser-i-fI-talic][name:tex-gyre-cur-sori-talic][fall-backs=mono-fonti-tal-ic-fall-backs,fea- Overfull \hbox (24.08849pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-fonti-tal-icfea-tures][Ser-if-S-lanted][name:tex-gyre-cur-sori-talic][fall-backs=mono- Overfull \hbox (11.28448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-fall-backs,fea-tures=mono-fontslant-ed-fea-tures][Ser-if-Bold][name:tex-gyre-cur- Overfull \hbox (97.96046pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sor-bold][fall-backs=mono-font-bold-fall-backs,fea-tures=mono-font-bold-fea-tures][Ser-if-BoldItalic][name:tex- Overfull \hbox (29.05647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-bolditalic][fall-backs=mono-font-boldital-ic-fall-backs,fea-tures=mono-font-boldital- Overfull \hbox (12.50848pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 icfea-tures][Ser-if-Bold-Slanted][name:tex-gyre-cur-sor-bolditalic][fall-backs=mono-font-bold- Overfull \hbox (14.51248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-fall-backs,fea-tures=mono-font-bold-slant-ed-fea-tures][Ser-if-Caps][name:tex-gyre-cur- Overfull \hbox (2.60847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sor-reg-u-lar][fall-backs=mono-font-caps-fall-backs,fea-tures=mono-font-caps-fea-tures][Ser-i- Overfull \hbox (3.1005pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fI-tal-ic-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-fonti-tal-ic-caps-fall-backs,fea- Overfull \hbox (16.55247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-fonti-tal-ic-caps-fea-tures][Ser-if-S-lant-ed-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall- Overfull \hbox (5.89648pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs=mono-fontslant-ed-caps-fall-backs,fea-tures=mono-fontslant-ed-caps-fea-tures][Ser-if- Overfull \hbox (57.71248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 Bold-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-font-bold-caps-fall-backs,fea-tures=mono- Overfull \hbox (28.34848pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 font-bold-caps-fea-tures][Ser-if-BoldItal-ic-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono- Overfull \hbox (13.24048pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 font-boldital-ic-caps-fall-backs,fea-tures=mono-font-boldital-ic-caps-fea-tures][Ser-if-Bold-Slant- Overfull \hbox (18.50848pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ed-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-font-bold-slant-ed-caps-fall-backs,fea- Overfull \hbox (52.64847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-font-bold-slant-ed-caps-fea-tures][Sans][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono- Overfull \hbox (12.82048pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontreg-u-lar-fall-backs,fea-tures=mono-fontreg-u-lar-fea-tures][San-sI-talic][name:tex-gyre-cur- Overfull \hbox (9.12448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sori-talic][fall-backs=mono-fonti-tal-ic-fall-backs,fea-tures=mono-fonti-tal-icfea-tures][SansS- Overfull \hbox (21.07649pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 lanted][name:tex-gyre-cur-sori-talic][fall-backs=mono-fontslant-ed-fall-backs,fea-tures=mono- Overfull \hbox (13.61247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-fea-tures][Sans-Bold][name:tex-gyre-cur-sor-bold][fall-backs=mono-font-bold-fall- Overfull \hbox (36.29248pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs,fea-tures=mono-font-bold-fea-tures][Sans-BoldItalic][name:tex-gyre-cur-sor-bolditalic][fall- Overfull \hbox (7.86449pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 backs=mono-font-boldital-ic-fall-backs,fea-tures=mono-font-boldital-icfea-tures][Sans-Bold- Overfull \hbox (9.00449pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 Slanted][name:tex-gyre-cur-sor-bolditalic][fall-backs=mono-font-bold-slant-ed-fall-backs,fea- Overfull \hbox (55.98447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-font-bold-slant-ed-fea-tures][San-sCaps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono- Overfull \hbox (10.8525pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 font-caps-fall-backs,fea-tures=mono-font-caps-fea-tures][San-sI-tal-ic-Caps][name:tex-gyre-cur- Overfull \hbox (1.80449pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sor-reg-u-lar][fall-backs=mono-fonti-tal-ic-caps-fall-backs,fea-tures=mono-fonti-tal-ic-caps-fea- Overfull \hbox (16.27647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures][SansS-lant-ed-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-fontslant-ed-caps- Overfull \hbox (2.0205pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fall-backs,fea-tures=mono-fontslant-ed-caps-fea-tures][Sans-Bold-Caps][name:tex-gyre-cur- Overfull \hbox (52.00046pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sor-reg-u-lar][fall-backs=mono-font-bold-caps-fall-backs,fea-tures=mono-font-bold-caps-fea-tures][Sans- Overfull \hbox (46.61249pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 BoldItal-ic-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-font-boldital-ic-caps-fall-backs,fea- Overfull \hbox (4.33649pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-font-boldital-ic-caps-fea-tures][Sans-Bold-Slant-ed-Caps][name:tex-gyre-cur-sor- Overfull \hbox (4.80447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 reg-u-lar][fall-backs=mono-font-bold-slant-ed-caps-fall-backs,fea-tures=mono-font-bold-slant- Overfull \hbox (46.55247pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ed-caps-fea-tures][Mono][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-fontreg-u-lar-fall-backs,fea- Overfull \hbox (28.44449pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 tures=mono-fontreg-u-lar-fea-tures][MonoItalic][name:tex-gyre-cur-sori-talic][fall-backs=mono- Overfull \hbox (9.2925pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-fall-backs,fea-tures=mono-fonti-tal-icfea-tures][Mono-Slanted][name:tex-gyre-cur- Overfull \hbox (109.69647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 sori-talic][fall-backs=mono-fontslant-ed-fall-backs,fea-tures=mono-fontslant-ed-fea-tures][MonoBold][name:tex- Overfull \hbox (142.99646pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-bold][fall-backs=mono-font-bold-fall-backs,fea-tures=mono-font-bold-fea-tures][MonoBoldItalic][name:tex- Overfull \hbox (29.05647pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-bolditalic][fall-backs=mono-font-boldital-ic-fall-backs,fea-tures=mono-font-boldital- Overfull \hbox (18.47249pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 icfea-tures][MonoBold-Slanted][name:tex-gyre-cur-sor-bolditalic][fall-backs=mono-font-bold- Overfull \hbox (3.77249pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 slant-ed-fall-backs,fea-tures=mono-font-bold-slant-ed-fea-tures][Mono-Caps][name:tex-gyre- Overfull \hbox (47.28447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 cur-sor-reg-u-lar][fall-backs=mono-font-caps-fall-backs,fea-tures=mono-font-caps-fea-tures][MonoItal- Overfull \hbox (45.19649pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-fonti-tal-ic-caps-fall-backs,fea-tures=mono- Overfull \hbox (25.48048pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fonti-tal-ic-caps-fea-tures][Mono-Slant-ed-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono- Overfull \hbox (49.69649pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontslant-ed-caps-fall-backs,fea-tures=mono-fontslant-ed-caps-fea-tures][MonoBold-Caps][name:tex- Overfull \hbox (19.22847pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-reg-u-lar][fall-backs=mono-font-bold-caps-fall-backs,fea-tures=mono-font-bold-caps- Overfull \hbox (28.92448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fea-tures][MonoBoldItal-ic-Caps][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono-font-boldital- Overfull \hbox (50.5725pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 ic-caps-fall-backs,fea-tures=mono-font-boldital-ic-caps-fea-tures][MonoBold-Slant-ed-Caps][name:tex- Overfull \hbox (11.22447pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 gyre-cur-sor-reg-u-lar][fall-backs=mono-font-bold-slant-ed-caps-fall-backs,fea-tures=mono-font- Overfull \hbox (9.18448pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 bold-slant-ed-caps-fea-tures][Hand-writ-ing][name:tex-gyre-cur-sor-reg-u-lar][fall-backs=mono- Overfull \hbox (6.10048pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 fontreg-u-lar-fall-backs,fea-tures=mono-fontreg-u-lar-fea-tures][Cal-lig-ra-phy][name:tex-gyre- Overfull \hbox (19.97246pt too wide) in paragraph at lines 4--1 \3>simplefonts:3-12pt-mm-mb--1 cur-sor-reg-u-lar][fall-backs=mono-fontreg-u-lar-fall-backs,fea-tures=mono-fontreg-u-lar-fea-tures] backend > xmp > using file '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 pages > flushing realpage 2, userpage 2 pages > flushing realpage 3, userpage 3 close source > level 2, order 4, name '/Users/vm/Desktop/error.tex' close source > level 1, order 4, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv' mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: /Applications/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.034 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 12 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 405 modules (0.721 sec), 91 tables (0.044 sec), 496 chunks (0.764 sec) mkiv lua stats > traced context: maxstack: 1254, freed: 0, unreachable: 1254 mkiv lua stats > cleaned up reserved nodes: 58 nodes, 9 lists of 450 mkiv lua stats > node memory usage: 2 glue, 2 kern, 2 penalty, 10 attribute, 49 glue_spec, 4 attribute_list, 2 temp, 2 user_defined mkiv lua stats > node list callback tasks: 7 unique task lists, 6 instances (re)created, 185 calls mkiv lua stats > h-node processing time: 0.012 seconds including kernel mkiv lua stats > attribute processing time: 0.028 seconds front- and backend mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > jobdata time: 0.002 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 1502 direct, 1062 indirect, 2564 total mkiv lua stats > randomizer: resumed with value 0.04152102537524 mkiv lua stats > loaded tex modules: 1 requested, all found (*-simplefonts) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > result saved in file: error.pdf, compresslevel 3, objectcompresslevel 3 mkiv lua stats > loaded fonts: 1 files: latinmodern-math.otf mkiv lua stats > font engine: otf 3.103, afm 1.513, tfm 1.000, 3 instances, load time 0.450 seconds mkiv lua stats > used platform: osx-64, type: unix, binary subtree: texmf-osx-64 mkiv lua stats > used engine: luatex version 1.05 with functionality level 6357, banner: this is luatex, version 1.05.0 (tex live 2017) mkiv lua stats > control sequences: 49275 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 64 MB (ctx: 63 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (τεχ) mkiv lua stats > runtime: 1.91 seconds, 3 processed pages, 3 shipped pages, 1.571 pages/second system | total runtime: 2.928 seconds

2 7

SciTE under GNU/Debian Linux - lpeg not loaded
by mf 23 Sep '17

23 Sep '17

Hello list, I'm trying to use SciTE under Debian GNU/Linux stable (64 bit) to edit my ConTeXt files. I've installed scite 3.7.2 from the Debian repository. Downloaded Scintillua and copied its "lexers" folder under /usr/share/scite. Created a symbolic link from /etc/scite/lexers to that folder: /etc/scite/lexers -> /usr/share/scite/lexers Copied the "context" folder from tex/texmf-context/context/data/scite and created a symbolic link to it in /etc/scite: /etc/scite/context -> /usr/share/scite/context Appended the following lines to /etc/scite/SciTEGlobal.properties: import lexers/lpeg import context/scite-context-user Now I open Scite and can see the ConTeXt customization. Shortcuts keys work, but syntax highlighting does not, because the lpeg library is not loaded. There's a message in the side window: "warning: lpeg not loaded". The message comes from the "scite-ctx.lua" file in the "context" folder. I've installed the package lua-lpeg from the Debian repository. When I run "lua scite-ctx.lua" it manages to load the lpeg library, because the warning does not appear. It's lua inside SciTE that can't load the lpeg library. Any hints? Thank you in advance, best regards, Massi

2 3

Brill fonts / using Greek characters in math
by Henning Hraban Ramm 23 Sep '17

23 Sep '17

Ahoi, did anyone make typescripts for the Brill fonts (http://www.brill.com/about/brill-fonts)? Esp. I’d like to use their Greek characters for math. Don’t understand lfg files yet.. So I guess the task is: How to map Unicode Greek to math Greek? Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

2 3

hiding page number in postponed makeup page
by Henning Hraban Ramm 23 Sep '17

23 Sep '17

Hi all, back from the meeting I’m still working on my full page figure placement. Most of it works so far, even if it tends to collide with floats, but now I’d like to switch off the page numbers on that pages. The M(N)WE is simplified in that I use only a text area sized frame instead of a full page image on a layer. If I could place the image layer on top of the page numbers that also would be a solution. \setuppapersize[A6] \setuppagenumbering [location=footer, alternative=doublesided, state=start] \startsetups paginaoff \setuppagenumbering[location=,] % doesn’t work \stopsetups \setupmakeup[standard] [page=no, doublesided=no, headerstate=empty, footerstate=empty, before=\setups{paginaoff}] \starttext \input knuth \startpostponing[+2] \startstandardmakeup \setuppagenumbering[location=,] % doesn’t work \framed [width=\textwidth, height=\textheight, background=color, backgroundcolor=blue, foregroundcolor=white, foregroundstyle=bold, frame=off, ]{This page should show no page number} \stopstandardmakeup \stoppostponing \dorecurse{5}{ \recurselevel \input tufte \par } \stoptext Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

3 6

Centering an algorithm
by Fabrice Couvreur 23 Sep '17

23 Sep '17

Hello, Wolfgang offered me a way to present an algorithm. Can not I center it ? Thank you. Fabrice \definecolor[MyBlue][c=0.06 , m=0.03, y=0.00, k=0.00] \defineframedtext [algorithmframe] [width=fit, background=color, foregroundstyle={\tt}, backgroundcolor=MyBlue, framecolor=darkblue, corner=round] \definelines [algorithm] [space=on, before=\startalgorithmframe, after=\stopalgorithmframe] \starttext \startlinecorrection[blank] \startmidaligned \startalgorithm Variables : \math{V} est un réel \math{N} est un entier naturel Début Affecter à \math{V} la valeur 354\,412 Affecter à \math{N} la valeur 0 Tant que \unknown\unknown \math{N} prend la valeur \unknown\unknown \math{V} prend la valeur \unknown\unknown Fin Tant que Afficher \unknown\unknown Fin \stopalgorithm \stopmidaligned \stoplinecorrection \stoptext

1 0

Problem with WinEdt
by Ursula Hermann 20 Sep '17

20 Sep '17

Hello! Since yesterday I cant compile my files. Example I have writen: \define[3]\ChapterListCommand {\starttabulate \NC Number \NC #1 \NC\NR \NC Title \NC #2 \NC\NR \NC Page \NC #3 \NC\NR \TB[medium] \NC File \NC \structurelistuservariable{file} \NC\NR \stoptabulate} \setuplist[chapter][alternative=command,command=\ChapterListCommand] \define[2]\ChapterHeadCommand {\startframed[align=flushleft,strut=no] \starttabulate[before=,after=] \NC Number \NC #1 \NC\NR \NC Title \NC #2 \NC\NR \TB[medium] \NC File \NC \structureuservariable{file} \NC\NR \stoptabulate \stopframed} \setuphead[chapter][command=\ChapterHeadCommand] \starttext \completecontent \startchapter[title=Knuth example][file=knuth.tex] \input knuth \stopchapter \startchapter[title=Zapf example][file=zapf.tex] \input zapf \stopchapter \stoptext\define[3]\ChapterListCommand {\starttabulate \NC Number \NC #1 \NC\NR \NC Title \NC #2 \NC\NR \NC Page \NC #3 \NC\NR \TB[medium] \NC File \NC \structurelistuservariable{file} \NC\NR \stoptabulate} \setuplist[chapter][alternative=command,command=\ChapterListCommand] \define[2]\ChapterHeadCommand {\startframed[align=flushleft,strut=no] \starttabulate[before=,after=] \NC Number \NC #1 \NC\NR \NC Title \NC #2 \NC\NR \TB[medium] \NC File \NC \structureuservariable{file} \NC\NR \stoptabulate \stopframed} \setuphead[chapter][command=\ChapterHeadCommand] \starttext \completecontent \startchapter[title=Knuth example][file=knuth.tex] \input knuth \stopchapter \startchapter[title=Zapf example][file=zapf.tex] \input zapf \stopchapter \stoptext Then i get the following code Command Line: context.exe --synctex=-1 "short.tex" Startup Folder: D:\My Documents Error Launching Console Application ConTeXt ... Command Line: context.exe --synctex=-1 "short.tex" Startup Folder: D:\My Documents Das System kann die angegebene Datei nicht finden. Whats wrong here? ConTeXt standalone is installed. Uschi

3 4

sectionconversionset not working for table of contents
by Stephens, Kenny 19 Sep '17

19 Sep '17

I am trying to number my bodymatter chapters differently than my appendix chapters but with little success. My attempts include the following: n If I do not assign a 'sectionconversionset' then the bodypart chapters are numbered with numerals and the appendix chapters are numbered with characters. However, sections and subsections are numbered with numerals in each the bodypart and appendix --- I don't want that. n Assigning a 'sectionconversionset' for the bodypart and appendix results in all chapters being numbered with numerals. Sections/subsections are still numerals. n Assigning a 'sectionconversionset' separately for each head type produces no change compared to the previous method. I obtained these results with the 2017 TeXLive version of ConTeXt 2017.05.15. The same result occurs with live.contextgarden.net. I've tried multiple variations, all with the same result. Any ideas would be greatly appreciated. Thanks. Kenny The rest of the message is a minimal example: \startsectionblockenvironment [bodypart] \definestructureconversionset [bodyset] [I,N,KR,a,m] [N] % unusual combination for testing \setuphead [chapter,section,subsection] [sectionconversionset=bodyset] \setuphead [chapter] [style={\rm\bf}] \setuphead [section] [style={\ss\bf}] \setuphead [subsection] [style={\sl}] \stopsectionblockenvironment \startsectionblockenvironment [appendix] \definestructureconversionset [appendixset] [O,A,R,r,KA] [R] \setuphead [chapter,section,subsection] [sectionconversionset=appendixset] \setuphead [chapter] [style={\rm\bf}] \setuphead [section] [style={\sans}] \setuphead [subsection] [style={\sl}] \stopsectionblockenvironment \setupcombinedlist [content] [list={chapter,section,subsection}] \setuplist [chapter] [style=\bigbodyfont\bold, alternative=b,] \setuplist [section] [width=2.0em, margin=2.0em, alternative=c,] \setuplist [subsection] [width=3.0em, margin=4.0em, style=slanted, alternative=c,] \startdocument \startfrontmatter \placecontent[criterium=all] \stopfrontmatter \startbodymatter \startchapter[title={The First Numerals Chapter}] \startsection[title={The First Caps-Romannumerals Section}] \input knuth \startsubsection[title={The First characters Subsection}] \input knuth \stopsubsection \stopsection \startsection[title={The Second Caps-Romannumerals Section}] \input knuth \stopsection \stopchapter \startchapter[title={The Second Numerals Chapter}] \startsection[title={The First Caps-Romannumerals Section}] \input knuth \stopsection \stopchapter \stopbodymatter \startappendices \startchapter[title={The First Characters Appendix}] \startsection[title={The First Romannumerals Section}] \input knuth \stopsection \stopchapter \startchapter[title={The Second Appendix}] \input knuth \startsection[title={The First Romannumerals Section}] \startsubsection[title={The First romannumerals Subsection}] \input knuth \stopsubsection \stopsection \stopchapter \stopappendices \stopdocument

2 2

Metafun "Structure-Trees"
by Ursula Hermann 18 Sep '17

18 Sep '17

Hello! My question is: Is it possible to make "Structure Trees" for English Sentences with "Categorial Grammar"? Sorry, I have no example. Thanks Uschi Hermann

4 5

mathmatrix vs substack
by Henri 15 Sep '17

15 Sep '17

Dear devs, Thank you very much for fixing this one https://mailman.ntg.nl/pipermail/ntg-context/2017/089790.html Unfortunately it seems like you broke substack and mathmatrix on the way. MWE below fails with version 2017.09.08 17:24 Cheers, Henri --- \starttext \placeformula \startformula \sum_{\startsubstack \NC k \NR \NC \omega_n \NR \stopsubstack} \stopformula \placeformula \startformula \startmathmatrix[left=\left|,right=\right|] \NC 0 \NC 1 \NR \NC 1 \NC 0 \NR \stopmathmatrix = -1 . \stopformula \stoptext

2 2

Increment the section counter
by Fabrice Couvreur 14 Sep '17

14 Sep '17

Hello, The number of the sections is 1 2 3 ... How to make it 3 5 6 ... ? Thank you Fabrice

4 4

Re: [NTG-context] Who is maintaining the modules website?
by Christoph Reller 14 Sep '17

14 Sep '17

On Thu, 14 Sep 2017 11:50:03 +0200 Mojca Miklavec < mojca.miklavec.lists(a)gmail.com> wrote: > On 13 September 2017 at 15:06, Christoph Reller wrote: > > I tried to send an email to modules(a)contextgarden.net and got the below > > reply. On https://modules.contextgarden.net/help.html, this email > address is > > mentioned as the primary contact point to the maintainer of the > > modules.contextgarden.net website. Who can I contact if I have a problem > > with this website? > > Taco Hoekwater, currently busy at the ConTeXt meeting: > http://meeting.contextgarden.net/ > > But if the above email is not working, we'll fix it. I suspect that > Taco asked me to create a mailing list and I forgot. > > Anyway, reporting infrastructure problems on this mailing list is also > perfectly fine. > Thank you Mojca! I will raise the issue once the ConTeXt meeting is over. Cheers, Christoph

1 0

Who is maintaining the modules website?
by Christoph Reller 14 Sep '17

14 Sep '17

Hi, I am unsure whether this mailing list is the correct one to ask this question. So please excuse the noise. I tried to send an email to modules(a)contextgarden.net and got the below reply. On https://modules.contextgarden.net/help.html, this email address is mentioned as the primary contact point to the maintainer of the modules.contextgarden.net website. Who can I contact if I have a problem with this website? Cheers, Christoph ---------- Forwarded message --------- From: Mail Delivery System <MAILER-DAEMON(a)mail.ijs.si> Date: Wed, Sep 13, 2017 at 2:13 PM Subject: Undelivered Mail Returned to Sender To: <christoph.reller(a)gmail.com> This is the mail system at host mail.ijs.si. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report, including the few lines that follow this paragraph. You can delete your own text from the attached returned message. <modules(a)contextgarden.net>: host lioness.ijs.si[2001:1470:ff80:88:219:d1ff:fe3c:c4cc] said: 550 5.1.1 <modules(a)contextgarden.net>: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command)

2 1

Caption location in floatcombination
by Christoph Reller 13 Sep '17

13 Sep '17

Hi, It seems to me that the location given to \setupcaptions is not honored correctly in floatcombinations anymore. Consider the following MWE: \setupcaptions[location=top, number=no] \starttext \placetable[][]{One}{ \bTABLE \bTR \bTD First \eTD \eTR \eTABLE} \placefloat[][]{}{ \startfloatcombination \placetable[][]{Two}{ \bTABLE \bTR \bTD Second \eTD \eTR \eTABLE} \stopfloatcombination} \stoptext In earlier versions of ConTeXt, both captions "One" and "Two" of both tables are rendered above the respective table. In the currently latest version, the caption "Two" is rendered below the table. Is this a bug or do I have to setup caption location separately for floatcombinations? Any feedback is welcome. Cheers, Christoph

1 0

Re: [NTG-context] Hyphenation with dashes in natural table
by Christoph Reller 13 Sep '17

13 Sep '17

Dear Pablo, Rik, and Thomas Thank you so much for your quick help! This gives me much more insight into the matter. And you provide various solutions with their pros and cons. For the moment I will stick to Thomas' suggestion \setupbreakpoints[compound] because I don't want to change the source files. Many thanks, Christoph

1 0

Hyphenation with dashes in natural table
by Christoph Reller 11 Sep '17

11 Sep '17

Hi, It seems that the hyphenation algorithm for long words with dashes when typeset in a natural table has changed. MWE: \starttext \bTABLE[width=5cm] \bTR \bTD super-cali-fragi-listic-expi-ali-docious \eTD \bTD The longest word known to me that ever had an appearance in a musical. \eTD \eTR \eTABLE \stoptext In earlier versions of ConTeXt, the super-cali... word is hyphenated after "expi-" and no overfull box occurs. In the currently latest version the word is hyphenated after "super-" and, since the rest of the word does not fit the table cell, it overlaps text in the right hand cell. Could this be a bug or do I have to setup hyphenation differently in natural tables? Any feedback is welcome. Cheers, Christoph

4 3

automatically splitting big images (calculation problem)
by Henning Hraban Ramm 10 Sep '17

10 Sep '17

Ahoi, I got some long images that I’d like to split over several pages. \def\clipfigure{\dodoubleempty\doClipFigure} \def\doClipFigure[#1][#2]{ \dorecurse{#1}{% \clip[ height=\textheight, voffset=\dimexpr((\recurselevel -1) * \textheight) ]{\externalfigure[#2][width=\textwidth]}\par } } \clipfigure[3][verylongimage] But "\dimexpr((\recurselevel -1) * \textheight)" for the vertical offset is wrong. How can I do this calculation? Greetlings, Hraban --- http://www.fiee.net http://wiki.contextgarden.net GPG Key ID 1C9B22FD

3 5

\definemathfence commands
by Otared Kavian 10 Sep '17

10 Sep '17

Hi everyone, With the command \definemathfence it is possible to define for instance the following command \definemathfence[duality][angle][command=yes,factor=auto] so that $\duality{T,\phi}$ results in $\langle T,\phi \rangle$ and the \langle and \rangle are appropriately scaled when necessary. How can one create a command called \bracparenth in order to get a left bracket on the left and a right parenthesis on the right, that is $\bracparenth{a,b} = [a,b)$ and so that when necessary it scales automatically. Below is the example for \duality. Thanks in advance: OK %%% begin mathfence-example.tex \definemathfence[duality][angle][command=yes,factor=auto] \definemathfence[parenth][parenthesis][command=yes,factor=auto] \starttext The action of $T$ on a smooth function $\phi$ is denoted by \startformula \duality{T,\phi} \stopformula while the scalar product of two functions $f$ and $g$ is denoted $\parenth{f|g}$. \stoptext %%% end mathfence-example.tex

2 1

Re: [NTG-context] Obtaining an old standalone
by Jeong Dal 10 Sep '17

10 Sep '17

> > This is what I did: > > sh ./first-setup.sh --context=2016.1.4 --all > . ~/Context/tex/setuptex > Setting "/home/rmason/Context/tex" as ConTeXt root. > > cd to the directory containing my document, then > > context document.tex > > resolvers | trees | analyzing 'home:texmf' > resolvers | globbing | confusing filename, name: 'README.txt', lower: 'readme.txt', already: 'ReadMe.txt' > mtxrun | unknown script 'context.lua' or 'mtx-context.lua' > Dear Roger Mason, I also had a similar problem recently after installing texlive 2017. But it is resolved now by doing the following according to the suggestions: run mtxrun —generate and luatools —generate May be, “ luatools —generate" is OK. I am using TeXshop in OS X. So I am not sure this works in Linux system. I hope that it may help. Good luck! Best regards, Dalyoung

3 3

bug in \over ?
by Alan Bowen 09 Sep '17

09 Sep '17

The numerator in \startformula {ΑΒ\over CD} \stopformula should be italicized, should it not? I am using ConTeXt ver: 2017.09.08 17:24. Alan

2 1

\setupheadertexts except on pages with title of chapter
by Fabrice Couvreur 09 Sep '17

09 Sep '17

Hello, I would like that on the pages with the title of the chapter the header is empty. Fabrice \setupheadertexts[{\getmarking[section]}][pagenumber] [{\getmarking[chapter]}][pagenumber] \setuppagenumbering[alternative=,location=] \starttext \placelist[chapter,section][alternative=c] \startchapter[title={First chapter}] \startsection[title={First section}] \dorecurse{5}{\input knuth} \stopsection \stopchapter \startchapter[title={Second chapter}] \startsection[title={Second section}] \dorecurse{5}{\input knuth} \stopsection \stopchapter \stoptext

2 4

mathalignment vs mathmatrix
by Henri 09 Sep '17

09 Sep '17

Dear devs, In the latest beta the interaction between mathalignment and mathmatrix is broken. The biggest problem is that documents containing this pattern do not typeset anymore at all! (That makes 100 errors; please try again.) Please fix. Cheers, Henri --- \define\Up{\mathord\Uparrow} \define\Dn{\mathord\Downarrow} \starttext \placeformula \startformula \startmathalignment \NC \psi_{+,\Up} ... \startmathmatrix \stopmathmatrix \NR \NC \psi_{+,\Dn} ... \NR \stopmathalignment \stopformula \stoptext

2 2

Expandable \doifelse tests
by Henri Menke 08 Sep '17

08 Sep '17

Dear list, Motivated by this question on TeX.SX https://tex.stackexchange.com/questions/370868 I was fiddling around with the \doifelse conditionals. I noticed that most of them are not expandable, which makes it very difficult to concatenate them. Here a simple example \starttext \doifelse{a}{% \doifelse{x}{x}{a}{b}% <- evaluates to "a" but not expandable }{yes}{no} \stoptext This outputs "no" even though "a" is equal to "a". Would it be possible to substitute these conditionals by expandable ones? I would volunteer to help make them expandable. Cheers, Henri

3 2

Background with rounded corners (Metafun)
by Fabrice Couvreur 08 Sep '17

08 Sep '17

Hello, I would like to have three corners rounded as in the figure. Thank you Fabrice \definecolor[MyColorA][r=0.8784, g=0.8784, b=0.8784] \definecolor[MyColorB][c=0.00,m=0.27,y=1.00,k=0.00] \startuseMPgraphic{MyFrame} path b ; picture p ; p := textext.rt("\bf\tfx\white\framedtextparameter{Title}") ; p := p shifted (.3EmWidth,OverlayHeight-.6EmWidth) ; b := boundingbox p enlarged .3EmWidth ; fill OverlayBox withcolor \MPcolor{MyColorA} ; fill b withcolor \MPcolor{MyColorB} ; draw p ; setbounds currentpicture to boundingbox currentpicture enlarged 2mm ; \stopuseMPgraphic \defineoverlay [MyFrame] [\useMPgraphic{MyFrame}] \defineframedtext [MyFrame] [frame=off, foregroundstyle={\switchtobodyfont[10pt]}, background=MyFrame, align={verytolerant}, height=fit] \definefloat [recipe] [figure] \setupfloat [recipe] [default={right,none}] \showframe \starttext \placerecipe{} {\startMyFrame[Title=Info,width=10cm] L'équivalent vingt pieds (EVP) est une unité de mesure de conteneurs (de longueur courante 20 pieds, soit environ \unit{6,1 meter}). 1 EVP représente environ \unit{38,5 cubic meter}. \stopMyFrame } \input knuth \stoptext

4 8

Re: [NTG-context] Tagging and Math Matrix
by Christoph Reller 07 Sep '17

07 Sep '17

On Wed, 6 Sep 2017 11:25:51 +0200 Hans Hagen <pragma(a)wxs.nl> wrote: > On 9/6/2017 9:55 AM, Christoph Reller wrote: > > On Tue, 5 Sep 2017 16:29:52 +0200 Hans Hagen <pragma(a)wxs.nl > > <mailto:pragma@wxs.nl>> wrote: > > > > On 8/30/2017 9:45 AM, Christoph Reller wrote: > > > On Mon, Dec 28, 2015 at 3:45 PM Christoph Reller > > > <christoph.reller(a)gmail.com> wrote: > > > > > > There seems to be a problem with the structure information added > > > when using \startmatrix: > > > > > > A fix would be very much appreciated. > > > > should be ok now > > > > > > Thank you Hans for this fix! > > > > There seems to be, however, still a minor issue with a more complete MWE: > > \math{ > > \startmatrix > > \NC A \NC B \NR > > \NC C \NC D \NR > > \stopmatrix} > > can you test with > > \def\math_matrix_process#1#2% > {\forgettagging % otherwise dummy mrows and such > \dowithnextbox > {\scratchdimen\dimexpr(\nextboxdp-\nextboxht)/2 > \ifcase#2\or+\mathaxisheight\textfont2\fi\relax > > > \ifcase#1\relax\or\lower\scratchdimen\or\or\raise\scratchdimen\fi\hbox\bgroup > \normalstartimath > \mathmatrixparameter\c!left > \vcenter{\unvbox\nextbox}% > \mathmatrixparameter\c!right > \normalstopimath > \egroup}% > \vbox} > Indeed, this is much better! Thank you! I recommend to include this as a patch in ConTeXt. However: Testing never stops ;-) I have the following MWE: \definemathmatrix[pmatrix][left={\left(},right={\right)}] \math{ \startpmatrix \NC A \NC B \NR \NC C \NC D \NR \stoppmatrix} This (including your suggested fix) results in the following structure tree: <document> |-<math> | '-<mrow> | '-<mrow> | '-<mfenced> | '-<mrow> '-<math> '-<mtable> |-<mtr> | |-<mtd> | | '-<math> | | '-<mrow> | | '-<mi> | | '-"A" | '-<mtd> | '-<math> | '-<mrow> | '-<mi> | '-"B" '-<mtr> |-<mtd> | '-<math> | '-<mrow> | '-<mi> | '-"C" '-<mtd> '-<math> '-<mrow> '-<mi> '-"D" I think that the <mtable> should be located within the <mfenced>, shouldn't it? Cheers, Christoph

2 1

Substituting Greek characters in math mode
by Alan Bowen 07 Sep '17

07 Sep '17

I should like to have the Brill font substitute for the Greek alphabet (upper and lower cases) as well for the numerals in Tex Gyre Termes Math. So far, I have been able to get the Brill numerals (oldstyle) but nothing more: the Greek letters in math mode are from Termes Math. Here is what I have: \definefontfamily[mainface][serif][Brill] [protrusion=quality, expansion=quality, mode=node, force=yes, ] \definefallbackfamily[mainface][mm][Brill][range={0030-0039, 0391-03A9, 03B1-03C9}, scale=1] \definefallbackfamily [mainface] [mm] [Brill] [preset=math:lowercasegreeknormal] \definefallbackfamily [mainface] [mm] [BrillItalic] [preset=math:lowercasegreekitalic] \definefallbackfamily [mainface] [mm] [Brill] [preset=math:uppercasegreeknormal] \definefallbackfamily [mainface] [mm] [BrillItalic] [preset=math:uppercasegreekitalic] \definefontfamily[mainface][mm][TeX Gyre Termes Math][scale=0.94] \setupmathematics[autopunctuation={all}, ucgreek=normal, lcgreek=italic] \setupbodyfont[mainface,10pt] \starttext A~B~C~a~b~c \emph{A~B~C~a~b~c}\quad math: \m{A~B~C~a~b~c} 0123456789\quad math: \m{0123456789} δ \emph{δ}\quad math: \m{δ} π \emph{π}\quad math: \m{π} Π \emph{ Π}\quad math: \m{Π} \stoptext Any suggestions or pointers will be most welcome. Alan

1 1

issues with \scitebuffer and \sciteinlinebuffer
by Pablo Rodriguez 06 Sep '17

06 Sep '17

Hans, after updating to latest beta (from 2017.09.05 15:10) to enjoy the new none method in the scite buffers, I have the following sample: \setupindenting[yes, always, big] \usemodule[scite] \setuptyping[margin=2cm] \startbuffer[typebuffer] | \ConTeXt\ \ConteXt \par \stopbuffer \starttext \scitebuffer[typebuffer] \scitebuffer[none][typebuffer] \letterbar a \sciteinlinebuffer[typebuffer]. b \stoptext And I’m experiencing the following issues: 1. "|" breaks compilation when method is set to "none". 2. "\sciteinlinebuffer" adds always an extra blank space after it. 3. Method "none" treats spaces as linebreaks and removes "\". 4. \setuptyping and \setuptype don’t work with the scite buffers. What am I doing wrong? Many thanks for your help, Pablo -- http://www.ousia.tk

2 4

Font DejaVu with a font for Mathematics
by Fabrice Couvreur 06 Sep '17

06 Sep '17

Hello, I use for the documents of my students the font DejaVu because I find that it is very readable on paper. Unfortunately, this is not a font for writing Mathematics. I would like to use DejaVu font for text and a font to write mathematical formulas. What do you recommend ? Thank you. Fabrice

3 3

Obtaining an old standalone
by Roger Mason 06 Sep '17

06 Sep '17

Hello, Is there a means of obtaining an old standalone? I would like to get ConTeXt ver: 2016.01.04 15:47 MKIV beta fmt: 2016.1.4 Thanks, Roger

3 9

Re: [NTG-context] Tagging and Math Matrix
by Christoph Reller 06 Sep '17

06 Sep '17

On Tue, 5 Sep 2017 16:29:52 +0200 Hans Hagen <pragma(a)wxs.nl> wrote: > On 8/30/2017 9:45 AM, Christoph Reller wrote: > > On Mon, Dec 28, 2015 at 3:45 PM Christoph Reller > > <christoph.reller(a)gmail.com <mailto:christoph.reller@gmail.com > >> wrote: > > > > There seems to be a problem with the structure information added > > when using \startmatrix: > > > > A fix would be very much appreciated. > > should be ok now > Thank you Hans for this fix! There seems to be, however, still a minor issue with a more complete MWE: \math{ \startmatrix \NC A \NC B \NR \NC C \NC D \NR \stopmatrix} The resulting structure tree is as follows: <document> '-<math> '-<mrow> '-<mtext> '-<mrow> |-<mrow> | '-<mtr> | |-<mtd> | | '-<math> | | '-<mrow> | | '-<mi> | | '-"A" | '-<mtd> | '-<math> | '-<mrow> | '-<mi> | '-"B" |-<mrow> (*) |-<mrow> | '-<mtr> | |-<mtd> | | '-<math> | | '-<mrow> | | '-<mi> | | '-"C" | '-<mtd> | '-<math> | '-<mrow> | '-<mi> | '-"D" '-<mrow> (*) The elements marked with (*) are IMHO unnecessary. Do you agree? Cheers Christoph

2 1

Fwd: Re: The binomial coefficients do not look optimal
by Hans Hagen 05 Sep '17

05 Sep '17

-------- Forwarded Message -------- Subject: Re: [NTG-context] The binomial coefficients do not look optimal Date: Sat, 2 Sep 2017 18:35:53 +0200 From: Hans Hagen <pragma(a)wxs.nl> To: Mikael P. Sundqvist <mickep(a)gmail.com> On 9/2/2017 4:58 PM, Mikael P. Sundqvist wrote: > On Fri, Sep 1, 2017 at 7:49 PM, Hans Hagen <pragma(a)wxs.nl > <mailto:pragma@wxs.nl>> wrote: > > On 9/1/2017 1:56 PM, Mikael P. Sundqvist wrote: > > Hi, > > I stumbled upon this (see the attached file for the result): > > %%% Test file > \setupbodyfont[10pt] > \starttext > \startTEXpage[offset=10pt] > \type{\tbinom{n}{k}}: $\tbinom{n}{k}$, (does not look good, the > vertical space between $n$ and $k$ is too big) \par > \type{\binom{n}{k}}: $\binom{n}{k}$ (looks fine to me)\par > \type{\dbinom{n}{k}}: $\dbinom{n}{k}$ (does not look good, too > big parenthesis, even for displayed formulas).\par > \stopTEXpage > \stoptext > %%% End of test file > > I think something should be changed to get the binomial > coefficients to look better. In particular I am concerned about > the rather big parenthesis in displaystyle (and not so much > about the vertical space issue in \tbinom). > > /Mikael > > PS The result looked better if I used the lucida fonts, if that > helps. > > This is indeed font dependent. These binoms use a low level tex > primitive that uses a threshold for steps and that one is part of > the math parameters of a font and these are not that good for lm. As > I'm looking into some other low level side effect I was in the mood > for a configuration option for \setupmathfractions. > > So, in the next beta you can get the effects iof the attached: > > - relate the threshold to the bodyfont size > - use normal left/right fences instead > > fwiw, cambria and pagella look better too. Upto you to wikify it. > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl > <http://www.pragma-ade.nl> | www.pragma-pod.nl > <http://www.pragma-pod.nl> > ----------------------------------------------------------------- > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an > entry to the Wiki! > > maillist : ntg-context(a)ntg.nl <mailto:ntg-context@ntg.nl> / > http://www.ntg.nl/mailman/listinfo/ntg-context > <http://www.ntg.nl/mailman/listinfo/ntg-context> > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > <https://bitbucket.org/phg/context-mirror/commits/> > wiki : http://contextgarden.net > ___________________________________________________________________________________ > > > Thank you very much, I'm looking forward to the next beta, and I will > try to wikify it when I have tried it out. Also lucida looks better than > latin modern does at the moment. > > I am a bit confused about the different versions. I would have guessed > that there was \tbinom and \dbinom and that \binom used one of them > depending on if one is in text mode or in display mode (just as I would > expect \frac to behave like \tfrac in text mode and \dfrac in display > mode). But \tbinom looks very different from \binom in text mode (with > more vertical space). Is this on purpose? Have I missed something? One can configure those things but the absense of rules and presence of fences matters too (all kind of inter-this-or-that and above-below-this-or-that playts a role). Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 1

Re: [NTG-context] Tagging and Math Matrix
by Christoph Reller 05 Sep '17

05 Sep '17

On Mon, Dec 28, 2015 at 3:45 PM Christoph Reller <christoph.reller(a)gmail.com > wrote: > There seems to be a problem with the structure information added when using > \startmatrix: > > \setuptagging[state=start] > \starttext > \math{ > \startmatrix > \NC A \NR > \NC B \NR > \stopmatrix} > \stoptext > > The log reports an open chain: document>1 => mtr>1 => mtd>1 => mtr>2 => > mtd>2 => mtr>3 > This may be a bug. > This is clearly a bug. The resulting structure tree of the above MWE is as follows (sorry for the ASCII art): <document> '-<mtr> '-<mtd> |-<mtr> | '-<mtd> | |-<mtr> | | '-<mtd> | | |-<math> | | | '-<mrow> | | | '-<mtext> | | | '-<mrow> | | | |-<mrow> | | | '-<mrow> | | '-<math> | | '-<mrow> | | '-<mtext> | | |-<mrow> | | '-<mrow> | '-<math> | '-<mrow> | '-<mi> | '-"B" '-<math> '-<mrow> '-<mi> '-"A" A fix would be very much appreciated. Thanks in advance, Christoph

2 1

MS Office Chinese fonts in ConTeXt
by Martin Bruchanov 05 Sep '17

05 Sep '17

Hi all, I was trying to create a Chinese document. However, it was quite difficult to find actual information and find fonts... Here is the result: https://github.com/BruXy/ConTeXt-Chinese There is still wrong numbering of Tables and I am not sure how to convert mschinese.ctex into module, but maybe somebody will help. Regards, BruXy PS: It you have some other working Chinese ConTeXt documents, I would be happy to get inspired.

3 5

How to "terminate" or break from a side float?
by Alan Braslau 05 Sep '17

05 Sep '17

Hi, Below is a MWE achieving the desired behavior, but is a messy solution. Given a side float, how can one "terminate" filling text or break to after the side float? There *must* be a very simple and proper command to do this, but I have not found it. Alan \starttext \startplacefigure [location={left,none}] \framed [width=.3\textwidth,height=.3\textwidth] {} \stopplacefigure \input ward \startplacefigure [location={force,none}] (this forces a break) \stopplacefigure \input knuth \stoptext

2 1

Empty page to suppress header (background) frame
by Procházka Lukáš Ing. 04 Sep '17

04 Sep '17

Hello, suppose the following code: ---- \setuplayout[header=5mm,headerdistance=5mm,] \setupbackgrounds[header][text][bottomframe=on] \setupheadertexts[left][right] \starttext Page 1 \page[empty,blank] Page 2 \stoptext ---- Page 2 in this sample is empty - no text and no header/footer - but it KEEPS FRAME around HEADER. How to: - define header to be framed normally and - to be "frame-free" when \page[empty] (and/or maybe \page[blank]) is called? Best regards, Lukas -- Ing. Lukáš Procházka | mailto:LPr@pontex.cz Pontex s. r. o. | mailto:pontex@pontex.cz | http://www.pontex.cz | IDDS:nrpt3sn Bezová 1658 147 14 Praha 4 Mob.: +420 702 033 396

2 5

The binomial coefficients do not look optimal
by Mikael P. Sundqvist 02 Sep '17

02 Sep '17

Hi, I stumbled upon this (see the attached file for the result): %%% Test file \setupbodyfont[10pt] \starttext \startTEXpage[offset=10pt] \type{\tbinom{n}{k}}: $\tbinom{n}{k}$, (does not look good, the vertical space between $n$ and $k$ is too big) \par \type{\binom{n}{k}}: $\binom{n}{k}$ (looks fine to me)\par \type{\dbinom{n}{k}}: $\dbinom{n}{k}$ (does not look good, too big parenthesis, even for displayed formulas).\par \stopTEXpage \stoptext %%% End of test file I think something should be changed to get the binomial coefficients to look better. In particular I am concerned about the rather big parenthesis in displaystyle (and not so much about the vertical space issue in \tbinom). /Mikael PS The result looked better if I used the lucida fonts, if that helps.

2 2

Re: [NTG-context] about "unknown script 'context.lus' or 'max-context.lua'"
by Jeong Dal 02 Sep '17

02 Sep '17

Dear Hans van der Meer, According to your word, I added the PATH to texmf-dist(texlive 2017) to the ConTeXt(LuaTex).engine directly. And, in the terminal, run mtxrun —generate and run luatools —generate once more. Then ConTeXt(LuaTeX) is working fine. Now, I can compile ConTeXt files using either texlive-2017 or minimal-beta. Thank you again. Best regards, Dalyoung

1 0

option none for \scitebuffer and \sciteinlinebuffer
by Pablo Rodriguez 02 Sep '17

02 Sep '17

Hans, I have the following sample: \usemodule[scite] \starttext \startbuffer This is text. % and this is a comment \stopbuffer \scitebuffer \sciteinlinebuffer \stoptext Since \scitebuffer and \sciteinlinebuffer default to TEX typing when none is set, would it be possible to set colors to "none". I need it to be able to use both buffers with \xmlprettyprinttext and \xmlinlineprettyprint. Many thanks for your help, Pablo -- http://www.ousia.tk

2 1

Re: [NTG-context] about "unknown script 'context.lus' or 'max-context.lua'"
by Jeong Dal 02 Sep '17

02 Sep '17

Dear Hans van der Meer, Thank you for your solution. It is similar to the one of the engines, which is for ConTeXt(beta, stand alone) and works fine. Thank you again. Best regards, Dalyoung > On OSX there are directories used by TeXShop one of which is ~/Library/Engines. The text files there contain scripts that callup a tex run. In my case I have a text file called BetaCur.engine to be found in the run popup button of TeXShop. In it I have: > #!/bin/bash > source ~/.bashrc > mtxrun --script context "$1" > > In the .bashrc file in my home directory the directory where the ConTeXt files reside is given amongst other defines: > CONTEXTROOT=$HOME/Applications/TeX-programs/directory-of-my-contextbeta-files/tex > export CONTEXTROOT > PATH=$PATH:$CONTEXTROOT/texmf-osx-64/bin

1 0

Letter module: Subject below opening
by Parchd 02 Sep '17

02 Sep '17

British letters typically have the subject below the opening. A stackexchange user asked many moons ago how to accomplish this in ConTeXt, and received a rather hackish response (https://tex.stackexchange.com/questions/22438/how-to-place-the-subject-line…) ConTeXt and the letter module have changed a lot since then, if my experience is correct. Is there a better solution than given there? Best, Parchd.

2 2

Re: [NTG-context] Letter module: Subject below opening
by Parchd 02 Sep '17

02 Sep '17

On Fri, Sep 01, 2017 at 01:04:44PM +0200, Parchd wrote: > British letters typically have the subject below the opening. > > A stackexchange user asked many moons ago how to accomplish this in > ConTeXt, and received a rather hackish response > (https://tex.stackexchange.com/questions/22438/how-to-place-the-subject-line…) > > ConTeXt and the letter module have changed a lot since then, if my > experience is correct. Is there a better solution than given there? > In answer to my own question, the following is certainly nicer than what I found on stackexchange. Perhaps there is still something better, though? \startsetups[letter:section:opening] \correspondenceparameter{opening} \blank {\bf\correspondenceparameter{subject}} \stopsetups \startsetups[letter:section:subject] \stopsetups \setuplettersection[opening][alternative=setups] \setuplettersection[subject][alternative=setups]

1 0

about "unknown script 'context.lus' or 'max-context.lua'"
by Jeong Dal 01 Sep '17

01 Sep '17

Dear all, 1. Today, I installed TeXlive 2017 using MacTeX and do a simple test using TeXshop. When I run a sample file using “ConTeXt(LuaTeX)”, then I got an error message: mtxrun | unknown script 'context.lua' or 'mtx-context.lua' I also did “mtxrun —generate”in the terminal which runs well. But “luatools —generate” also issue the similar error message: mtxrun | unknown script ‘base.lua’ or 'mtx-base.lua' However, it runs well under Stand-alone ConTeXt. What I have to do to make TeXlive work? 2. Recently, I also installed Textadept in OS X for test, and follow the steps explained in the wiki. If I open textadept in the terminal(open -a textadept), ConTeXt, lua, Python worked OK. But it issued an error message as following when I open it directly from the application folder. > mtxrun --autogenerate --script context --autopdf --purge --synctex=-1 "Main.tex" Failed to execute child process "mtxrun" (No such file or directory) > exit status: 256 In the terminal, echo $PATH contains the folder “/Library/TeX/texbin” which contains all executables of TeXlive 2017. Is there anything that I have to do more? Thank you for reading. Best regards, Dalyoung

2 1

Dangerous bend sign in mkiv
by Otared Kavian 31 Aug '17

31 Aug '17

Hi, Is there a way to get the dangerous bend sign (which exists in the Donald Knuth’s manfnt) in mkiv? The following (given by one of our gurus and dating back to sevral years) works fine in mkii, but I don’t know how to translate it in mkiv… %%% begin dangerous-bend.tex \loadmapfile [manfnt.map] \definefontsynonym [bends] [manfnt] \def\GetSym#1{\getglyph{bends}{\char#1}} \startsymbolset [Dangerous Bends] \definesymbol [dbend] [\GetSym{127}] \definesymbol [lhdbend] [\GetSym{126}] \stopsymbolset \setupsymbolset [Dangerous Bends] \setupbodyfont[manfnt] \starttext \symbol{dbend} \blank[big] \symbol{lhdbend} \stoptext %%% end dangerous-bend.tex Thanks in advance: OK

2 3

Head sections automatically marked for conditional text
by Paul Mazaitis 31 Aug '17

31 Aug '17

The short version: I'd like to set up a context document with multiple user-defined heads, such that they can be conditionally compiled and/or altered. It seems that modes are what I want, but I'm having trouble figuring out how to automatically set up a particular section to be wrapped in a particular mode (if that makes any sense at all). Is this possible? The long version: What I think I want is something like: --- begin foo.tex --- \startenvironment foo \definemode[showexamples][keep] % Can I add some magic here in the following setup to automagically % wrap these sections with commands to start and stop a particular mode? \definehead[example][subject][style=\bfc] --- end foo.tex --- --- begin bar.tex --- \environment foo \enablemode[showexamples] \starttext \startexample[title={I'd like to be able to use modes to enable or disable this section}] I'd like to have a mode to conditionally show all of the {\tt example} sections (without affecting other content, etc.). \stopexample \stoptext --- end bar.tex --- The added difficulty here is that I need three kinds of modes (A, B, And C) with the need to support changing the layout, etc. based on what modes are enabled. I've gotten this to work by including \startmode[example] and \stopmode commands in the document, but I'd love to find a way to have this happen automatically by some clever setups for user defined heads, as above. (I tried playing around with before= and after=, with disastrous results...) I've worked through the discussion about using blocks against enumerations, found here: http://www.mail-archive.com/ntg-context@ntg.nl/msg83818.html ...but I'm hoping that there's a simpler solution (without the external file, etc.) Is there a way to do this within the current framework, or should I be wrapping all of this in new commands? Or something else entirely? Thanks! -Paul

2 1

Formulas and pagebreaks
by Henri Menke 30 Aug '17

30 Aug '17

Dear list, Motivated by this question on TeX.SX (https://tex.stackexchange.com/questions/388963) I found that formulas do not honour the samepage option in spacebefore. I could track the issue down to the \strc_math_obey_depth macro where a vertical kern is inserted which apparently introduces a good breakpoint. MWE is below, the line is marked with an ASCII arrow. Please fix. Cheers, Henri --- \setupformulas[spacebefore={big,samepage},spaceafter=big] \unprotect \def\strc_math_obey_depth {\ifvmode\ifdim\prevdepth<\zeropoint\else\ifdim\prevdepth<\strutdp % maybe add a tracing option here \ifgridsnapping \directvspacing\v!depth \else \kern\dimexpr\strutdp-\prevdepth\relax % <----------- \prevdepth\strutdp \fi \fi\fi\fi} \protect \starttext \dorecurse{4}{\input knuth\par} \startformula \exp(x)=\sum_{k=0}^{+\infty}\frac{x^k}{k!}. \stopformula \stoptext

2 1

How to put a circle on top of a character
by Otared Kavian 30 Aug '17

30 Aug '17

Hi, How can I put a small circle on top of a character in math mode (for the curious this is needed when one defines the interior of a set…). I tried the following, but the small circle is too far away from the character A. I am sure I had an ugly solution for this in plain TeX some years ago but I woul dlike to have an elegant solution in ConTeXt. %%% begin interior-of-a-set.tex \showgrid \starttext \mathtriplet{A}{\circ}{} \startformula \mathtriplet{A}{\circ}{} \stopformula \stoptext %%% end interior-of-a-set.tex Thanks for your help: OK

3 7

Re: [NTG-context] Error with tagging and lohi alignment in table
by Christoph Reller 30 Aug '17

30 Aug '17

On Wed, 30 Aug 2017 10:35:56 +0200 Hans Hagen <pragma(a)wxs.nl> wrote: > On 8/30/2017 9:22 AM, Christoph Reller wrote: > > The following MWE now yields an error: > > > > \setuptagging[state=start] > > \starttext > > \bTABLE > > \setupTABLE[c][1][align=lohi] > > \bTR \bTD test \eTD \eTR > > \eTABLE > > \stoptext > > > > I'm afraid but this may be a bug. Many thanks in advance for all your > > effort. > fixed in next beta ... but move your \setupTABLE ine line up > Thank you, Hans, for the fix and for the hint!

1 0

Error with tagging and lohi alignment in table
by Christoph Reller 30 Aug '17

30 Aug '17

Hi, The following MWE now yields an error: \setuptagging[state=start] \starttext \bTABLE \setupTABLE[c][1][align=lohi] \bTR \bTD test \eTD \eTR \eTABLE \stoptext I'm afraid but this may be a bug. Many thanks in advance for all your effort. Cheers, Christoph

2 1

Re: [NTG-context] Scite module and escape does not work anymore
by Christoph Reller 30 Aug '17

30 Aug '17

On Tue, 29 Aug 2017 13:29:59 +0200 Hans Hagen <pragma(a)wxs.nl> wrote: > On 8/29/2017 9:31 AM, Christoph Reller wrote: > > Hi, > > > > I noticed that the scite module (m-scite.mkiv) has undergone some > > changes recently. When using this module to highlight source code, then > > the escape mechanism does not seem to work anymore. > > > > Can this be fixed? Thank you in advance for your effort. > i'll intercept it (there are no escapes in scite mode) > Oh, I see. Thank you, Hans. Christoph

1 0

lines in \setuptyping
by Pablo Rodriguez 30 Aug '17

30 Aug '17

Dear list, I have the following sample: \setuptyping[TEX][lines=yes] \starttext \startTEX code one line before two lines before three lines before \stopTEX \stoptext I thought the lines key should display multiple lines when they are in the code. How should I got the multiple lines in the sample above? Many thanks for your help, Pablo -- http://www.ousia.tk

3 6

Possible error in page-lay.mkiv
by Rik Kabel 29 Aug '17

29 Aug '17

In page-lay.mkvi I see, at lines 1591–1594: \definepapersize [doubleoversized] [ \c!width=\dimexpr \paperheight+\layouttargetparameter\c!distance\relax, \c!height=\dimexpr2\paperwidth +\layouttargetparameter\c!distance\relax] I would expect to see: \definepapersize [doubleoversized] [ \c!width=\dimexpr \paperwidth +\layouttargetparameter\c!distance\relax, \c!height=\dimexpr2\paperheight+\layouttargetparameter\c!distance\relax] -- Rik

1 0

Currency - space delimiting thousands
by Procházka Lukáš Ing. 29 Aug '17

29 Aug '17

Hello, is there a built-in (Lua-?)numeric format to produce big numbers with spaces delimiting thousands (widely used for currencies)? E.g.: ---- \cldcontext{string.format("%[separate-thousands].0f", 1234567.0)} % To give: "1 234 567.00" ---- Best regards, Lukas -- Ing. Lukáš Procházka | mailto:LPr@pontex.cz Pontex s. r. o. | mailto:pontex@pontex.cz | http://www.pontex.cz | IDDS:nrpt3sn Bezová 1658 147 14 Praha 4 Mob.: +420 702 033 396

3 5

Scite module and escape does not work anymore
by Christoph Reller 29 Aug '17

29 Aug '17

Hi, I noticed that the scite module (m-scite.mkiv) has undergone some changes recently. When using this module to highlight source code, then the escape mechanism does not seem to work anymore. MWE: \enabletrackers[buffers.visualize] \usemodule[scite] \setuptyping[TEX][escape={[[,]]}] \starttext \startTEX \test[[\em test]] \stopTEX \stoptext The reported error is: [ctxlua]:221: attempt to index local 'specification' (a nil value) stack traceback: [ctxlua]:221: in function <[ctxlua]:220> [C]: in function 'lpegmatch' ...ext/tex/texmf-context/tex/context/base/mkiv/buff-ver.lua:283: in function 'n' ...ext/tex/texmf-context/tex/context/base/mkiv/buff-ver.lua:511: in function 'visualize' ...ext/tex/texmf-context/tex/context/base/mkiv/buff-ver.lua:760: in function <...ext/tex/texmf-context/tex/context/base/mkiv/buff-ver.lua:752> (...tail calls...) Can this be fixed? Thank you in advance for your effort. Cheers, Christoph

2 1

Border matrix
by Fabrice L 28 Aug '17

28 Aug '17

Hi, I’have a lot of courses notes in MKII. I’m trying to move to MKIV. I have a problem that I’m not able to resolve, to make a border matrix with brackets. In MKII, I was using a macro, found somewhere, which works great, but no longer works; here is the macro: % Border matrix: first line and column are label \catcode`\@=11\relax \newdimen\p@renwd \font\tenex=cmex10 \setbox0=\hbox{\tenex B} \p@renwd=\wd0 \def\bbordermatrix#1{\begingroup \m@th \setbox\z@\vbox{\def\cr{\crcr\noalign{\kern2\p@\global\let\cr\endline}}% \ialign{$##$\hfil\kern2\p@\kern\p@renwd&\thinspace\hfil$##$\hfil &&\quad\hfil$##$\hfil\crcr \omit\strut\hfil\crcr\noalign{\kern-\baselineskip}% #1\crcr\omit\strut\cr}}% \setbox\tw@\vbox{\unvcopy\z@\global\setbox\@ne\lastbox}% \setbox\tw@\hbox{\unhbox\@ne\unskip\global\setbox\@ne\lastbox}% \setbox\tw@\hbox{$\kern\wd\@ne\kern-\p@renwd\left[\kern-\wd\@ne \global\setbox\@ne\vbox{\box\@ne\kern2\p@}% \vcenter{\kern-\ht\@ne\unvbox\z@\kern-\baselineskip}\,\right]$}% \null\;\vbox{\kern\ht\@ne\box\tw@}\endgroup} \catcode`\@=12\relax but MKIV gives me the error: \bbordermatrix #1->\begingroup \m@th \setbox \z@ \vbox {\def \cr {\crcr \noa... l.26 i & j & k & l \cr} 16 \null\;\vbox{\kern\ht\@ne\box\tw@}\endgroup} 17 \catcode`\@=12\relax I look for solutions on the list, but did not find anything.Here is a minimal example: \starttext A border matrix: \startformula \bbordermatrix{ a & b & c & d \cr e & f & G & h \cr i & j & k & l \cr} \stopformula \stoptext As I have in my notes hundreds of such matrix, it is really difficult to change the input format. Do you know, or can you point me, to a solution ? I’m in a dead end.. Thanks a lot. F.

2 2

ICC profiles in the ConTeXt Suite?
by Pablo Rodriguez 28 Aug '17

28 Aug '17

Dear Mojca, [I beg your pardon, if you aren’t the maintainer of the ConTeXt Suite distribution. In that case I address this message to whom it might concern :-).] After reading some messages about PDF/A and PDF/X, I remembered that all my work documents should be PDF/A. Since we have ICC profiles in the ConTeXt Garden (http://wiki.contextgarden.net/PDFX#ICC_profiles, http://dl.contextgarden.net/misc/iccprofiles/complete_ICC_profiles.zip) I wonder why they aren’t part of the ConTeXt Suite. This would make things easier to create some kinds of PDF documents. In my personal case, I cannot update the ConTeXt Suite at work. I have to download it at home and replace the directory. Having to add the ICC profiles each time is something I’d rather avoid. If there is something I can do to add those files to the ConTeXt Suite, please tell me and I will do it. Many thanks for your help, Pablo -- http://www.ousia.tk

6 13

Re: [NTG-context] Problem with setup for fonts
by Robert Blackstone 28 Aug '17

28 Aug '17

On 27 Aug 2017, at 23:27 , : Pablo Rodriguez <oinos(a)gmx.es> wrote > > On 08/27/2017 08:46 PM, Robert Blackstone wrote: >> Hi Hans, >> Thanks for your reaction. Unfortunately it has not helped me for I have >> no idea how to set the parameter \Umathquad\textstyle. Just loading the >> fonts, as I believed you suggest in your mail, does not change anything: >> the compilation with a 2017 mkiv still stops at “ >> 7~$\xrightarrow[none]$~6 progression ”. > > Hi Robert, > > this works with latest beta from 2017.08.24 19:46: > > \definefontfamily[mainface][rm][Verdana] > \definefontfamily[mainface][tt][Courier] > \definefontfamily[mainface][mm][TeX Gyre Termes Math] > \setupbodyfont[mainface > \starttext > 7~$\xrightarrow[none]$~6 progression > \stoptext Hi Pablo, This works, thank you very much. I had tried several fonts mentioned on the ConTeX-wiki in the chapter "Using Math fonts in MkIV" but TeX Gyre Termes Math is not mentioned there. But actually it is [mm] that does the trick and I had not realized that. Even then several of the Math fonts mentioned did not work. Thanks again. Best regards, Robert

2 1

Search problems in large source code (unwanted paragraph breaks)
by Jaroslav Hajtmar 28 Aug '17

28 Aug '17

Hello ConTeXist. During the compilation of a large source code that contains many macros, I get paragraph break in output. For a long time, I am looking for a place where this problem occurs. I've tested manual checks and turned on many different trackers (for example use \enabletrackers[context.trace] from wiki) to see where the problem is, but I can not figure out the solution. Does anyone know how this problem can be addressed? In connection with this, I want to ask if there is something like \removeunwantedbreaks ??? Thanx Jaroslav Hajtmar

1 0

Search problems in large source code (unwanted paragraph breaks)
by Jaroslav Hajtmar 28 Aug '17

28 Aug '17

Hello ConTeXist. During the compilation of a large source code that contains many macros, I get paragraph break in output. For a long time, I am looking for a place where this problem occurs. I've tested manual checks and turned on many different trackers (use \enabletrackers[] from wiki) to see where the problem is, but I can not figure out the solution. Does anyone know how this problem can be addressed? In connection with this, I want to ask if there is something like \removeunwantedbreaks ??? Thanx Jaroslav Hajtmar

1 0

Re: [NTG-context] Problem with setup for fonts
by Robert Blackstone 27 Aug '17

27 Aug '17

On 25 Aug 2017, at 17:34 , Hans Hagen <pragma(a)wxs.nl> wrote: > To: ntg-context(a)ntg.nl > > On 8/25/2017 12:21 PM, Robert Blackstone wrote: >> On 08/24/2017 10:57 AM, Robert Blackstone wrote: >>>>> [...] >>>>> %%%%%%%%%++++++MWE+++++++%%%%%%%% >>>>> \usemodule[simplefonts] >>>>> \setmainfont[Verdana] >>>>> \setupbodyfont[10pt] >> does not work anymore in mkiv versions later than july 2016. >> >> Pablo Rodriguez helped me out: >>>> >>>> Robert, >>>> >>>> those commands now read: >>>> >>>> \definefontfamily[mainface][rm][Verdana] >>>> \setupbodyfont[mainface, 10pt] >>>> \starttext >>>> \input zapf >>>> \stoptext >>>> >>>> I hope it helps, >>>> >>>> Pablo >> >> It does help but for the Law of the Conservation of Trouble (or Misery) >> >> Having properly changed my font setup ConTeXt stumbles upon things like: >> >> “ 7~$\xrightarrow[none]$~6 progression ” >> >> The error message is: " ! Ma error: parameter \Umathquad\textstyle is not set." >> >> How and where can I remedy this? > This means that you haven't defined a math font so you need something: > > \definefontfamily[mainface][rm][Verdana] > \definefontfamily[mainface][tt][Courier] > \definefontfamily[mainface][mm][Cambria] > > or so, depending on what combination you want Hi Hans, Thanks for your reaction. Unfortunately it has not helped me for I have no idea how to set the parameter \Umathquad\textstyle. Just loading the fonts, as I believed you suggest in your mail, does not change anything: the compilation with a 2017 mkiv still stops at “ 7~$\xrightarrow[none]$~6 progression ”. However, when I use the older font calls, \usemodule[simplefonts] \setmainfont[Verdana] it compiles correctly files containing arrows ( $\xrightarrow[none]$ ) with the pre-2017 mkiv's . With my 2017 mkiv it still compiles correctly albeit not with the specified font but with latinmodern-math.otf. (Btw, I found the same behaviour for other fonts, such as: dejavu, times, palatino, bonum, lucidanova, lucida, garamond, libertine, gentium, xits, courier, and cambria.) For me the simplest solution would be to keep working with pre-2017 standalones for documents that contain these arrows (for musical tone- or chord-progressions ) But it intrigues me why some process that worked perfectly in many generations of mkiv has suddenly stopped working in the recent mkiv's. Best regards, Robert Blackstone

2 1

interface XML files
by Lawrence Bell 27 Aug '17

27 Aug '17

Hello mailing list, I have a bug report of sorts. I've been trying to take advantage of the XML interface files that come along with a ConTeXt installation, to generate information on the various commands. However, when I try to parse the XML files, I discover a couple of minor errors: - in file "i-common-value.xml", line 648, column 24: the XML comment ends with ---> instead of -->. - in file "t-letter.xml", line 178, column 2: <cd:command> element ends with </cd:interface> instead of </cd:command>. - in file "t-mathsets.xml", line 35, column 0: the final closing </cd:interface> tag is missing. - in file "t-title.xml", line 5, column 35: the attribute file=t-tile.mkvi" is missing an opening quote. - in file "t-fullpage.xml", line 8, column 6: element <cd:sequence> is ended with <cd:*d*equence>. - in file "t-memo.xml", line 136, column 2: <cd:command> element ends with </cd:interface> instead of </cd:command>. For reference, ConTeXt reports its version to be ConTeXt ver: 2017.08.15 12:35 MKIV beta fmt: 2017.8.24 >

2 1

Strange behavior with the Garamond font
by Fabrice Couvreur 27 Aug '17

27 Aug '17

Hello, I compiled the following document with Context Standalone and viewed the file with Evince, it is not readable ! Thanks Fabrice \loadtypescriptfile[mathdesign] \setupbodyfont[garamond] \starttext \input knuth \stoptext

3 10

Some questions about my document
by Fabrice Couvreur 27 Aug '17

27 Aug '17

Hello, I would like to have this : #################### Chapitre I : Espaces probabilisés I.1 - Expérience aléatoire et univers Définition 1.1 Définition 1.2 #################### Thank you Fabrice %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \definestructureconversionset [structure] [numbers, Romannumerals, numbers, numbers, numbers] [numbers] \setupheads [sectionconversionset=structure] \setupenumerations [ before={\blank[big]}, after={\blank[big]}, alternative=serried, width=broad, distance=0.5em, headstyle=bold, titlestyle=bold, prefix=chapter, way=bychapter, conversion=numbers] \defineenumeration [definition] [ text=Définition, title=yes, style=italic, list=all, listtext={Définition}] \starttext \startchapter[title=Espaces probabilisés] \startsection[title=Expérience aléatoire et univers] \startdefinition On appelle expérience aléatoire une expérience sur un système dont le résultat n'est pas connu d'avance et peut varier si on répète cette expérience. \stopdefinition \startdefinition On appelle univers l'ensemble des résultats possibles. Il est noté \math{\Omega}. \stopdefinition \stopchapter \stoptext %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

2 6