- ntg-context - Mailing Lists

Re: [NTG-context] balanced vertical spaces under \startcolumnset
by Sytse Knypstra 21 Aug '19

21 Aug '19

Dear Jeong Dal, I use the following functions to control the start and end of columns in a columnset:  \setuplayout[grid=yes] \emptylines[...] % see the command \emptylines in ConTeXtgarden \setupcolumnsetstart[...][...][...][...] % see the manual COLUMNS, page 9 \setupcolumnsetlines[...][...][...][...] % see the manual COLUMNS, page 9 %\showgrid % uncomment if you want to see the grid lines and line numbers You find the manual COLUMNS under the heading 'Layout' on https://wiki.contextgarden.net/Manuals. With kind regards, Sytse > Op 20 augustus 2019 om 12:37 schreef Jeong Dal <haksan(a)me.com>: > > > Dear all, > > I use the following code to make test. > To make the same height blank spaces after the problems, I use \vfill before \column. > The problem is that the second \column creates extra blank page. > But, without the second \column, the height of blank spaces of the second column are different. > > Is there a way to make the blank spaces height same while not to create a blank page? > > Thank you for reading. > > Best regards, > > Dalyoung > > > \usetypescriptfile[type-siz] > \usemodule[units] > \setupbodyfont[10pt,rm] > \definecolumnset > [exam] > [n=2] > > \starttext > > \startcolumnset[exam] > > \startitemize[n] > \item Answer to the questions: > \vfill > > \item Answer to the questions: > \vfill > > \column > > \item Answer to the questions: > \vfill > > \item Answer to the questions: > \vfill > > %\column > > \stopitemize > \stopcolumnset > > \stoptext

1 0

Use Visual studio code
by Eric Détrez 21 Aug '19

21 Aug '19

Hello Is it possible to use VScode as IDE for ConTeXt ? -- Eric Détrez Informatique Lycée Faidherbe, Lille Documents de cours en pdf : eric-detrez.fr

3 3

startnarrower and framed?
by Jon Wong 21 Aug '19

21 Aug '19

Hi all, I want to have a \startnarrower effect. But I also want that segment to have a border (hopefully a gradient background color too!). I tried: \startnarrower \framed{testing} Seems framed doesn’t observe startnarrower commands. \endnarrower How do I achieve that? Regards Jon

2 6

Re: [NTG-context] LMTX: Space in file names
by Otared Kavian 20 Aug '19

20 Aug '19

Hi Hans, Thanks to your reply, I just discovered the reason for which I could not typeset in lmtx files which have a space in their name from the Terminal: one has to say context "exercice 1.tex" that is to enclose the entire filename between double quotes… Which is completely logical! Thanks a lot for your time! Best regards: OK > On 20 Aug 2019, at 10:25, Hans Hagen <j.hagen(a)xs4all.nl> wrote: > > On 8/20/2019 9:36 AM, Otared Kavian wrote: >> I'll try the lua file you sent me, thank you. > > just run the file with "mtxrun --script oeps.lua" > >> However, I don't think the issue comes from the file name containing the word « problème »: indeed the attached file gives the same error in lmtx, but not in mkiv: > well, you can see it when you run the lua file -) > > i can process the exercice file (see attached log) > > context "exercice 1.tex" > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- > <exercice 1.log><exercice 1.pdf>

1 0

balanced vertical spaces under \startcolumnset
by Jeong Dal 20 Aug '19

20 Aug '19

Dear all, I use the following code to make test. To make the same height blank spaces after the problems, I use \vfill before \column. The problem is that the second \column creates extra blank page. But, without the second \column, the height of blank spaces of the second column are different. Is there a way to make the blank spaces height same while not to create a blank page? Thank you for reading. Best regards, Dalyoung \usetypescriptfile[type-siz] \usemodule[units] \setupbodyfont[10pt,rm] \definecolumnset [exam] [n=2] \starttext \startcolumnset[exam] \startitemize[n] \item Answer to the questions: \vfill \item Answer to the questions: \vfill \column \item Answer to the questions: \vfill \item Answer to the questions: \vfill %\column \stopitemize \stopcolumnset \stoptext

1 0

Trouble with lmtx install.bat
by Joseph Canedo 20 Aug '19

20 Aug '19

Dear list, It seems that sometimes incremental install.bat (ie run without wiping out the whole lmtx directory) does not work the same as full installation (ie wiping out the whole directory and reinstalling). I’ve ran install.bat first time this morning and I got the following error during installation tex error > tex error on line 137 in file page-txt.mklx: ! Undefined control sequence <argument> \c!middlestyle \mult_interfaces_get_parameters_item ...ty \fi #2 <argument> ...youtelementparameter \c!style , \c!middlestyle =\layoutelementparameter \... \mult_interfaces_get_parameters_indeed ..._item #1 ,], \setup_layoutelement ...ers {\??layouttexts :}[#1] \the \everysetuplayoutelem... <to be read again> \syst_helpers_double_empty_two_nop \par l.137 <empty file> Deleting the lmtx directory entirely and reinstalling from scratch succeeded (ie without above error), but I thought install.bat was able to update the files without need of erasing everything before ? Thanks Joseph

2 1

LMTX: Space in file names
by Otared Kavian 20 Aug '19

20 Aug '19

Hi Hans, I noticed that the lmtx beta from 2019.08.18 22:27 does not anymore accept spaces in file names, while the mkiv version does accept it. I am aware that putting a space in a file name is a very bad habit, but I am convincing some people who were used to use MS Word in order for them to use ConTeXt, and these people have many files with names containing spaces such as « correction problème 1.tex » (and in fact this is how I noticed this new behavior of lmtx: when typesetting such a file, lmtx looks for « correction.tex »). That is why I think if lmtx could continue to accept spaces in file names that would be very convenient. Do you think this would be possible? Best regards: OK

2 1

Italic corrections?
by Jon Wong 19 Aug '19

19 Aug '19

Hi all, Will this work? \usetypescript[pagella] \setupbodyfont[pagella,12pt] \definefontfeature [itlc=yes] This {\em will} work? Regards Jon

2 1

Fwd: metafun 2
by Mikael P. Sundqvist 19 Aug '19

19 Aug '19

On Wed, Aug 14, 2019 at 5:37 PM Hans Hagen <j.hagen(a)xs4all.nl> wrote: > On 8/14/2019 4:58 PM, Mikael P. Sundqvist wrote: > > > 1) 3d support. This is of course a very big request, but it would also > > be useful for many people. > > yes ... Alan and I are thinking of some (not that we came far yet) > Please keep us updated! :) > > 2) About graphing, it would be nice to be able to do contour polots and > > density plots. I know I asked for contour plots some time ago, and there > > were some examples, but I don't think there was ever some built in > > support for it. Maybe that can be done "easy" with help of lua? I guess > > there exist good algorithms. > > spec needed ... as 'code' can be any function it's mostly a matter of > what to pipe back to mp > I'm not sure what kind of spec you need. What I have in mind (others could complete) is in particular a way to plot the set of (x,y) such that f(x,y)=0 for some given function f and some rectangle in x and y. I made some plots with Mathematica http://www.maths.lth.se/matematiklth/personal/mickep/Contour.pdf (too big for the list) The first plot shows a difficulty with a contour plot, namely intersections. In the second one I added points, and it looks better. In the third plot I have not specified that the expression should be equal to 0. Then Mathematica plots the curves f(x,y)=C for various values of C. In the background it adds a density plot (i.e. a mesh with different colours for different values of the function. In the fourth plot, the regionplot, the pairs (x,y) for which f(x,y)<0 are marked. This is also very useful. In the fifth plot there is only the densityplot, with different colors for different values of f. I don't know how difficult it is to implement this kind of graphics. Also, it could be useful to be able to input the equation f(x,y)=0 and to receive the curves as MetaPost paths. It seems that one can do contour plots with the help of lua if that is something that helps ( http://franko.github.io/graph-toolkit/contour.html) Anything would be better than nothing, and I'm more than happy to test. > > > 3) (small) The possibility to have arrows in coordinate axes. I have not > > had the possibility to test the new features today, and maybe this is > > already built in (drawarrow?), but I mention it since I did not see it > > in the pdf. > > no, but that is rather trivial to add > Good! > > > Again, it is very nice that you work on extending MetaPost/MetaFun > further!! > wel, mp is ... fun (and these extension are somewhat challenging) > > Hans > Fun, indeed! /Mikael

1 0

LaTeX's itemsep in ConTeXt?
by Jon Wong 19 Aug '19

19 Aug '19

Hi all, Is there a counterpart in ConTeXt to LaTeX’s itemsep? Regards Jon

3 2

\setupcolumnsetlines does not work again
by Sytse Knypstra 19 Aug '19

19 Aug '19

I thought I understood the mechanism, but I found another instance where \setupcolumnsetlines does not give the desired result: %%%%%%%%%%% \definecolumnset[Two][n=2] \starttext Test %\page \setupcolumnsetlines[Two][1][1][9] \startcolumnset[Two] \input knuth \stopcolumnset \setupcolumnsetlines[Two][1][1][9] \startcolumnset[Two] \input knuth \stopcolumnset \stoptext %%%%%%%%%%% This setup gives indeed a balanced first page and an unbalanced second page. But if the fourth line (\page) is uncommented, the second output page is unbalanced and the third page is balanced. So the mechanism is therefore more complicated than > only if the first columnset extends to more than one page > the next \setupcolumnsetlines will work properly. What is the extended rule? If this intended behaviour, what is the reason behind it? Sytse > Op 17 augustus 2019 om 23:54 schreef Sytse Knypstra <sytse.knypstra(a)home.nl>: > > > Wolfgang wrote: > > The settings for the second columnset work when the first columnset goes over of two or more pages. > > Thank you, now I understand the mechanism: only if the first columnset extends to more than one page, the next \setupcolumnsetlines will work properly. Is this a bug or a feature? If it is a feature, what is the idea behind it? > > Sytse

1 0

Bug in lmtx with \Bbb
by Otared Kavian 19 Aug '19

19 Aug '19

Hi Hans, It seems that there is a bug in the handling of Blackboard Bold, in the latest lmtx (version 2019.08.02 19:40). The following gives the attached PDF file. However the same file typesets correctly in the latest mkiv beta. Thanks for your attention: OK \starttext The set of integers is denoted ${\Bbb N}$. \stoptext

2 3

Bug in lmtx in display mathmode
by Otared Kavian 19 Aug '19

19 Aug '19

Hi Hans, I have a long document which typesets correctly with mkiv, but I get a (cryptic for me…) fatal error message when I try to typeset it in lmtx: ! error: (nodes): trying to delete an attribute reference of a non attribute list node 4476mtx-context | fatal error: return code: 256 I could finally find the origin of the error, which is exposed in the following example: if you comment out the part from \startformula ... \stopformula, the file typesets correctly. But with this part, one gets the above error message, the culprit being \liminfbar which is defined in the first line. Note that \liminfbar is accepted when it is inline math. Best regards: OK %%% begin bug-math-lmtx.tex \definemathcommand[liminfbar][limop] {\underline{\mfunctionlabeltext{lim}}} \starttext If $(u_{n})_{n}$ is a sequence of real numbers, we define its {\it limit inferior}, denoted $\liminfbar$ by setting: \startformula a_{n} := \inf\{u_{k} \; ; \; k \geq n \}, \qquad\text{and then}\quad \liminfbar_{n\to\infty} u_{n} := \sup_{n \geq 1} a_{n}. \stopformula \stoptext %%% end bug-math-lmtx.tex

2 1

(no subject)
by Denis Maier 18 Aug '19

18 Aug '19

Hi, I am typesetting a newsletter using newcolumnsets, and I am struggling with placing my graphics. Why isn't the graphic on page 2 at the bottom (code below)? Best, Denis ``` \usemodule[newcolumnsets,simulate] \useMPlibrary[dum] \setupbodyfont [palatino] \setuphead[section][style=\bfa\ss] \setuplayout [grid=yes] \setuplayout [backspace=20mm, cutspace=15mm, width=middle, height=middle] \setupsystem [random=1234] \setuppagenumbering [ alternative=, location=, ] \setupfootertexts [Laubblatt 2019/1] [{\externalfigure[cow][height=15mm]}] \setupfooter [style=\ss] \setuptolerance [verytolerant,stretch] \definecolor[color-1][.5(red,green)] \definecolor[color-2][.5(green,blue)] \definecolor[color-3][.5(blue,red)] \definecolor[color-4][.5(white,black)] \definecolor[color-5][.5(white,color-4)] \startuniqueMPgraphic{frame} fill OverlayBox withcolor \MPcolor{color-1} ; \stopuniqueMPgraphic \startuniqueMPgraphic{contrast} fill OverlayBox withcolor \MPcolor{color-2} ; \stopuniqueMPgraphic \defineoverlay[frame] [\uniqueMPgraphic{frame}] \defineoverlay[contrast][\uniqueMPgraphic{contrast}] \definecolumnset[example][n=2] %\setupcolumnsetstart[example][1][1][2] %\setupcolumnsetstart[example][1][2][4] %\setupcolumnsetlines[example][1][1][-5] %\setupcolumnsetlines[example][1][2][-5] \definecolumnsetspan[wide] [n=2, background=contrast, color=white, ] \starttext \startcolumnset[example] \startcolumnsetspan[wide] \subject{Einleitung} {\tfx\setupinterlinespace\em \dorecurse{1}{\fakewords{50}{100}\par} } \stopcolumnsetspan \placefigure [btrl,none] {} { \externalfigure[placeholder][width=\columnsetspanwidth{1}] } \dorecurse{5}{\fakewords{50}{100}\par} \placefigure [btrl,none] {} { \externalfigure[placeholder][width=\columnsetspanwidth{2}] } \dorecurse{5}{\fakewords{50}{100}\par} \stopcolumnset \stoptext ```

1 3

Cross referencing by using \useexternaldoument
by Willi Egger 18 Aug '19

18 Aug '19

Hi all, there is an old thread concerning this issue from september 2015. It appears unfortunately, that this issue persists. You can reference to places inside a document, but references to an outside document are broken. The links do not work and no page numbers or texts are typeset from the external document. Can someone help me to solve this? Kind regards Willi MWE File: one.tex \enabletrackers[structures.referencing.analyzing] \setupinteraction[state=start] \starttext \starttabulate[|l|l|l|] \NC First document \NC \in{Chapter}[sec:first] \NC \at{Page}[sec:first] \NC\NR \NC Second document \NC \in{Chapter}[two::sec:second] \NC \at{Page}[two::sec:second] \NC\NR \stoptabulate \dorecurse{3}{\page[empty]} \chapter[sec:first]{First document} \stoptext File; two.tex \enabletrackers[structures.referencing.analyzing] \setupinteraction[state=start] \starttext \starttabulate[|l|l|l|] \NC First document \NC \in{Chapter}[one::sec:first] \NC \at{Page}[one::sec:first] \NC\NR \NC Second document \NC \in{Chapter}[sec:second] \NC \at{Page}[sec:second] \NC\NR \stoptabulate \dorecurse{2}{\page[empty]} \chapter[sec:second]{Second document} \stoptext

2 3

\date in LMTX
by Aditya Mahajan 18 Aug '19

18 Aug '19

Hi, There is a bug with \date in LMTX. \starttext \date[d=10] \stoptext does not change the date. Works okay in MKIV. Thanks, Aditya

3 2

Re: [NTG-context] \setupcolumnsetlines does not work
by Sytse Knypstra 17 Aug '19

17 Aug '19

Wolfgang wrote: > The settings for the second columnset work when the first columnset goes over of two or more pages. Thank you, now I understand the mechanism: only if the first columnset extends to more than one page, the next \setupcolumnsetlines will work properly. Is this a bug or a feature? If it is a feature, what is the idea behind it? Sytse

1 0

Re: [NTG-context] \setupcolumnsetlines does not work
by Sytse Knypstra 17 Aug '19

17 Aug '19

Thank you, Denis and Wolfgang. Wolfgang, your sentence > No, you set relative numbers (I checked it) but the first columnset > environment ends on the third page because you leave just enough > space on the second page to fit the text which produces an empty > third page. is not clear to me. If \setupcolumnsetlines has to be specified before \starttext and if the second parameter denotes the absolute page number of the column to be limited, then the following example still does not work correctly for the second page (ouput consists of two pages). \definecolumnset[Two][n=2]  \setupcolumnsetlines[Two][1][1][9]  \setupcolumnsetlines[Two][2][1][9]  \starttext   \startcolumnset[Two]  \input knuth   \stopcolumnset   \startcolumnset[Two]   \input knuth   \stopcolumnset  \stoptext Sytse > Op 17 augustus 2019 om 15:14 schreef Denis Maier <maier.de(a)gmail.com>: > > > Ok, have tried it now. No change ... > > Am Sa., 17. Aug. 2019 um 13:33 Uhr schrieb Denis Maier <maier.de(a)gmail.com>: > > > Also, what about \setupcolumnsetlines[Two][2][1][9]? > > > > Denis Maier <maier.de(a)gmail.com> schrieb am Sa., 17. Aug. 2019, 13:32: > > > >> If I am remembering correctly, the documentation has \setupcolumnsetlines > >> before \starttext. > >> > >> Sytse Knypstra <sytse.knypstra(a)home.nl> schrieb am Sa., 17. Aug. 2019, > >> 12:59: > >> > >>> In an effort to balance columns in a columnset layout, I found that in > >>> the following minimal example this effect is not obtained. > >>> After commenting out the first three lines after \starttext the result > >>> is ok. > >>> I am wondering what I overlooked this time. > >>> > >>> \definecolumnset[Two][n=2] > >>> \starttext > >>> \startcolumnset[Two] > >>> \input knuth > >>> \stopcolumnset > >>> \page > >>> \setupcolumnsetlines[Two][1][1][9] > >>> \startcolumnset[Two] > >>> \input knuth > >>> \stopcolumnset > >>> \stoptext > >>> > >>> Thank you for your suggestions, > >>> > >>> Sytse Knypstra > >>> > >>> ___________________________________________________________________________________ > >>> If your question is of interest to others as well, please add an entry > >>> to the Wiki! > >>> > >>> maillist : ntg-context(a)ntg.nl / > >>> http://www.ntg.nl/mailman/listinfo/ntg-context > >>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net > >>> archive : https://bitbucket.org/phg/context-mirror/commits/ > >>> wiki : http://contextgarden.net > >>> > >>> ___________________________________________________________________________________ > >>> > >> > Op 17 augustus 2019 om 15:50 schreef Denis Maier <maier.de(a)gmail.com>: > > > This here works for the first columnset, but not for the second one: > > ================================= > \usemodule[newcolumnsets] > > \definecolumnset[One][n=2] > > \setupcolumnsetlines[One][1][1][9] > \setupcolumnsetlines[One][1][2][9] > \setupcolumnsetlines[One][2][1][9] > \setupcolumnsetlines[One][2][2][9] > > \definecolumnset[Two][n=2] > \setupcolumnsetlines[Two][1][1][9] > \setupcolumnsetlines[Two][1][2][9] > \setupcolumnsetlines[Two][2][1][9] > \setupcolumnsetlines[Two][2][2][9] > > \starttext > \startcolumnset[One] > \input knuth > > \input knuth > \stopcolumnset > > \startcolumnset[Two] > \input knuth > > \input knuth > \stopcolumnset > \stoptext > =================================== > > Am Sa., 17. Aug. 2019 um 15:14 Uhr schrieb Denis Maier <maier.de(a)gmail.com>: > > > Ok, have tried it now. No change ... > > > > Am Sa., 17. Aug. 2019 um 13:33 Uhr schrieb Denis Maier <maier.de(a)gmail.com > > >: > > > >> Also, what about \setupcolumnsetlines[Two][2][1][9]? > >> > >> Denis Maier <maier.de(a)gmail.com> schrieb am Sa., 17. Aug. 2019, 13:32: > >> > >>> If I am remembering correctly, the documentation has > >>> \setupcolumnsetlines before \starttext. > >>> > >>> Sytse Knypstra <sytse.knypstra(a)home.nl> schrieb am Sa., 17. Aug. 2019, > >>> 12:59: > >>> > >>>> In an effort to balance columns in a columnset layout, I found that in > >>>> the following minimal example this effect is not obtained. > >>>> After commenting out the first three lines after \starttext the result > >>>> is ok. > >>>> I am wondering what I overlooked this time. > >>>> > >>>> \definecolumnset[Two][n=2] > >>>> \starttext > >>>> \startcolumnset[Two] > >>>> \input knuth > >>>> \stopcolumnset > >>>> \page > >>>> \setupcolumnsetlines[Two][1][1][9] > >>>> \startcolumnset[Two] > >>>> \input knuth > >>>> \stopcolumnset > >>>> \stoptext > >>>> > >>>> Thank you for your suggestions, > >>>> > >>>> Sytse Knypstra > >>>> > >>>> ___________________________________________________________________________________ > >>>> If your question is of interest to others as well, please add an entry > >>>> to the Wiki! > >>>> > >>>> maillist : ntg-context(a)ntg.nl / > >>>> http://www.ntg.nl/mailman/listinfo/ntg-context > >>>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net > >>>> archive : https://bitbucket.org/phg/context-mirror/commits/ > >>>> wiki : http://contextgarden.net > >>>> > >>>> ___________________________________________________________________________________ > >>>> > >>> > Op 17 augustus 2019 om 16:24 schreef Wolfgang Schuster <wolfgang.schuster.lists(a)gmail.com>: > > > Denis Maier schrieb am 17.08.2019 um 15:50: > > This here works for the first columnset, but not for the second one: > > > > ================================= > > \usemodule[newcolumnsets] > The new code base is used by default and you don't have to load the module. > > \definecolumnset[One][n=2] > > > > \setupcolumnsetlines[One][1][1][9] > > \setupcolumnsetlines[One][1][2][9] > > \setupcolumnsetlines[One][2][1][9] > > \setupcolumnsetlines[One][2][2][9] > > > > \definecolumnset[Two][n=2] > > \setupcolumnsetlines[Two][1][1][9] > > \setupcolumnsetlines[Two][1][2][9] > > \setupcolumnsetlines[Two][2][1][9] > > \setupcolumnsetlines[Two][2][2][9] > The second argument expects the page number of the column where want > to change the number of lines. In your example the second environment > starts at page 3 but you change the lines only for the first and second > page. > > Wolfgang > > > Op 17 augustus 2019 om 17:00 schreef Wolfgang Schuster <wolfgang.schuster.lists(a)gmail.com>: > > > Denis Maier schrieb am 17.08.2019 um 16:45: > > Ok. So no need to load the module first. Good. > > > > So the second argument is an absolute pagenumber, not relative to > > where to columnset starts... But then, this here should work: > No, you set relative numbers (I checked it) but the first columnset > environment ends on the third page because you leave just enough > space on the second page to fit the text which produces an empty > third page. > > Wolfgang > >

1 0

lmtx setuparranging
by jkitz＠inradius.net 17 Aug '19

17 Aug '19

Booklet layout 2UP is not working with lmtx for me. MWE: under mkiv I get all 4 booklet pages laid out for two-sided print and fold. \setuppapersize[A5][A4,landscape] \setuparranging[2UP,doublesided] \starttext \dorecurse{4}{\input tufte \blank} \dorecurse{3}{\input bryson \blank} \dorecurse{3}{\input ward \blank} \stoptext context —version: mtx-context | main context file: /users/kitz/ctxmkiv/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2019.04.25 10:36 MNWE: When I switch to lmtx, only booklet pages 1 and 4 are set and repeated on next page. context —version: mtx-context | main context file: /users/kitz/lmtx/tex/texmf-context/tex/context/base/mkiv/context.mkxl mtx-context | current version: 2019.08.17 12:16 There seems to be flushing of pages going on under lmtx. Thanks for any help. Kitz

1 0

Re: [NTG-context] \setupcolumnsetlines does not work
by Wolfgang Schuster 17 Aug '19

17 Aug '19

Denis Maier schrieb am 17.08.2019 um 17:49: > Ok. > With this I don't get the empty page. But the setupcolumnsetlines has > still no effecgt for the second environment. > > === > > \definecolumnset[One][n=2] > > \setupcolumnsetlines[One][1][1][9] > > \definecolumnset[Two][n=2] > > \setupcolumnsetlines[Two][1][1][5] > > \starttext > > \startcolumnset[One] > > \input knuth > > \stopcolumnset > > \startcolumnset[Two] > > \input knuth > > \stopcolumnset > > \stoptext > The settings for the second columnset work when the first columnset goes over of two or more pages. Wolfgang

1 0

Re: [NTG-context] \setupcolumnsetlines does not work
by Wolfgang Schuster 17 Aug '19

17 Aug '19

Denis Maier schrieb am 17.08.2019 um 16:45: > Ok. So no need to load the module first. Good. > > So the second argument is an absolute pagenumber, not relative to > where to columnset starts... But then, this here should work: No, you set relative numbers (I checked it) but the first columnset environment ends on the third page because you leave just enough space on the second page to fit the text which produces an empty third page. Wolfgang

1 0

\setupcolumnsetlines does not work
by Sytse Knypstra 17 Aug '19

17 Aug '19

In an effort to balance columns in a columnset layout, I found that in the following minimal example this effect is not obtained. After commenting out the first three lines after \starttext the result is ok. I am wondering what I overlooked this time. \definecolumnset[Two][n=2]  \starttext  \startcolumnset[Two]  \input knuth  \stopcolumnset  \page \setupcolumnsetlines[Two][1][1][9]  \startcolumnset[Two]  \input knuth  \stopcolumnset  \stoptext  Thank you for your suggestions, Sytse Knypstra

3 5

ConTeXt Meeting 2019 registration details and tshirts
by Taco Hoekwater 17 Aug '19

17 Aug '19

Hi all, Because I received some email requests on whether registration is still open for the ConTeXt meeting in Bassenge and what to do about day visits et cetera, here is the nitty gritty on that: * As of today, there is room left for 10 extra participants, so late registrations are still possible. * Nevertheless, if you are certain you want to attend; better make sure to register shortly. You’ll be sorry if there is a sudden influx of dozens of new ConTeXt users from CCCamp and registrations have to be closed because of lack of room ;) * There are no single rooms available any more. * Registration will be closed on Sunday September 8 even if we are not full up by then, as some dinner ingredients need to be ordered in advance. * Day visits and partial attendance are both possible, but must be announced before September 8 if you want to stay for dinner and/or overnight (see above). Note further that overnight stays are subject to availability of empty beds. Fees for such visits: Lunch: €10; Dinner: €30; Overnight stay: €40. * The registration form can be used for day visits and partial attendance as well as for “normal” registration: https://meeting.contextgarden.net/2019/register.shtml but emailing me personally works fine as well. I hope that covers everything. Feel free to contact me directly if I forgot something. Then, there is a note on T-shirts needed: At the moment, we do not have enough registrations for a balanced budget. This means we had to cancel the free conference T-shirt, sorry! However, all is not lost: Pavneet Arora will be producing T-shirts for those that are willing to pay cash on delivery at Bassenge. Expected price is around €15 per shirt. Because of production times, reservation is both required and urgent. The production order should be made next Monday or Tuesday at the latest, so if you want one (or more) of the T-shirts, decide quickly! Pavneet will probably post a screenshot of the final logo design later today, and I am sure he will answer any additional questions you may have. Best wishes, Taco

1 0

The odd semantics of \begincsname
by Henri Menke 17 Aug '19

17 Aug '19

Dear list, According to the LuaTeX documentation: “The \begincsname primitive is like \csname but doesn’t create a relaxed equivalent when there is no such name.” I thought it would be possible to use this fact to skip the \relax-ed definition when \def-ining a new control sequence, but the following MWE fails with \inaccessible: \expandafter\gdef\csname yes\endcsname{} \expandafter\gdef\begincsname no\endcsname{} \bye Is this a bug or is this behaviour intended? Could this be fixed by making manufacture_csname aware whether it is in a def_cmd context or not? Cheers, Henri

2 3

radiobuttons
by Henning Hraban Ramm 16 Aug '19

16 Aug '19

Hi, coming back to an old form project I find that something changed WRT to form fields. For one, some fields appear smaller and shifted upwards – I managed to fix that with setups. What I can’t change is behaviour of radiobuttons: if I click one, all rbs of one group activate, and I can’t deactivate them any more. In my project all of the fields are duplicated on other pages, and while all other fields’ contents get copied, it doesn’t work for radiobuttons; my minimal example unfortunately can’t show that. \setupinteraction[state=start] \setupfield[MMradio][ option=printable, frame=overlay, corner=round, height=1em, width=1em, align=bottom, ] \definefield[chooseTeX][radio][MMradio][rbContext,rbLatex,rbOther][rbContext] \definesubfield[rbContext][][] \definesubfield[rbLatex][][] \definesubfield[rbOther][][] \starttext I want to use \field[rbContext] \CONTEXT\ \field[rbLatex] \LaTeX\ \field[rbOther] other. \page Just to confirm: I want to use \field[rbContext] \CONTEXT\ \field[rbLatex] \LaTeX\ \field[rbOther] other. \stoptext Greetlings, Hraban

3 8

Fwd: OSFONTDIR and Windows 10
by Henning Hraban Ramm 16 Aug '19

16 Aug '19

> Am 2019-08-15 um 08:08 schrieb Huseyin Özoguz <h.oezoguz(a)mmnetz.de>: > > I just moved to Win 10 (coming from Win 7) with a fresh system and installed Context. > > My problem: The manual installed fonts are not stored in "Windows/Font" like before, but in "AppData/Local/Microsoft/Windows/Fonts" – the default Fonts, which came with windows, are still there in Windows/Font. > > If I change OSFONTDIR to the new path and execute "mtxrun --script font --reload" after that, the new fonts are found by Context, but that seems no good way, because now the default-fonts are not found. > > How to solve this situation? How can I prevent Win10 from installing manual installed fonts into this other path and instead install it into "Windows/Font"directly? (Other programs like Corel etc. have no problems finding those other fonts, regardles of there location or OSFONTDIR.) > > Another solution: Give Context two pathes to look for fonts, is that possible? OSFONTDIR is like other PATH variables, it can contain several paths, separated by ; (at least on Linux and OSX, maybe it’s : on Windows). My OSFONTDIR is rather lengthy to include my collections of commercial and free fonts (beware, that makes ConTeXt slow). Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

2 3

Fwd: ConTeXt Group Newsletter August 2019
by Henning Hraban Ramm 15 Aug '19

15 Aug '19

Thank you, Taco! > = ConTeXt Meeting blurb = > > If you have not registered yet, please consider joining us at YES, register NOW if you didn’t already! > = Chaos Communication Camp = > > CG Board member Henning Hraban Ramm is representing the ConTeXt community > at the Chaos Communication Camp 2019 in the 'LaTeX Village’ (set up in > conjunction with Dante e.V.) > > https://events.ccc.de/camp/2019/wiki/Village:LaTeX > > If any of you are in the neighbourhood of Ziegeleipark Mildenberg, Zehdenick, > Germany between August 21 and 25, I am sure he would love to see some visitors > (Zehdenick is about 60km north of Berlin). No, sorry, that won’t work – tickets are sold out. Of course I’d be glad to meet other ConTeXt users in our lovely LaTeX lab ;) BTW our neighbours are the latex loving Kinky Geeks - no coincidence… :D There will be 5 kids in our village, I’m curious what questions they’ll bring up… Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

1 0

OSFONTDIR and Windows 10
by Huseyin Özoguz 15 Aug '19

15 Aug '19

Hello, I just moved to Win 10 (coming from Win 7) with a fresh system and installed Context. My problem: The manual installed fonts are not stored in "Windows/Font" like before, but in "AppData/Local/Microsoft/Windows/Fonts" – the default Fonts, which came with windows, are still there in Windows/Font. If I change OSFONTDIR to the new path and execute "mtxrun --script font --reload" after that, the new fonts are found by Context, but that seems no good way, because now the default-fonts are not found. How to solve this situation? How can I prevent Win10 from installing manual installed fonts into this other path and instead install it into "Windows/Font"directly? (Other programs like Corel etc. have no problems finding those other fonts, regardles of there location or OSFONTDIR.) Another solution: Give Context two pathes to look for fonts, is that possible? Thank you. -- Huseyin Özoguz Schilfweg 52a 27751 Delmenhorst E-Mail: h.oezoguz(a)mmnetz.de Tel.: 0176/20203416

1 1

ConTeXt Group Newsletter August 2019
by Taco Hoekwater 14 Aug '19

14 Aug '19

In this newsletter: * 2018 journal progress * ConTeXt Meeting updates * Chaos Communication Camp * Board elections * Becoming a CG member = 2018 journal progress = Our next ConTeXt Group journal issue is printed! Printed copies will reside below my desk until the meeting. The Table of Contents is online at: https://articles.contextgarden.net/journal/2018.html The PDFs are not yet publicly available but current CG Members can send me an email for an advance copy of any of the article PDFs. If you are not a member, you will have to wait until summer 2020. = ConTeXt Meeting updates = There is now a preliminary programme available on the meeting website (address below). Due to financial considerations, this will likely be our last visit to ’t Sjetootje. If you would like to visit the castle with us, you should register now :) = ConTeXt Meeting blurb = If you have not registered yet, please consider joining us at ’t Sjetootje, Bassenge-Boirs, Belgium on September 16–21, 2019. The ConTeXt meeting is an excellent way to get help with any problems you may have in ConTeXt, to learn about future directions of ConTeXt and LuaTeX, or just to talk and have a drink with other ConTeXt users. You do not have to be a ConTeXt Group member to attend the meeting, but members do get a meeting fees discount worth more than the CG membership fees for a year. In fact, if you attend for the very first time, there is an extra discount for that as well. For registration and other information, see the website at https://meeting.contextgarden.net/2019 The 13th ConTeXt Meeting is sponsored by Dante e.V (www.dante.de) and NTG (www.ntg.nl) as well as by Pragma ADE (Hans & Ton) and Bittext (Taco). We are very grateful to all our sponsors! = Chaos Communication Camp = CG Board member Henning Hraban Ramm is representing the ConTeXt community at the Chaos Communication Camp 2019 in the 'LaTeX Village’ (set up in conjunction with Dante e.V.) https://events.ccc.de/camp/2019/wiki/Village:LaTeX If any of you are in the neighbourhood of Ziegeleipark Mildenberg, Zehdenick, Germany between August 21 and 25, I am sure he would love to see some visitors (Zehdenick is about 60km north of Berlin). = Board elections = The ConTeXt meeting is also the location of the annual CG membership meeting. This year, no less than four board members are forced to resign according to the bylaws. We are looking for CG members to help fill those spots in the board. If you are interested in joining the CG board, please send a message to any of the current board members and we will get in touch with you. We can really use the help! Our previous newsletter already provided one tentative new board member, but ideally we would like at least one more candidate. = Becoming a CG member = Our official stated purpose: * to promote the ConTeXt typographic system; * provide its users with infrastructure and information; * support its development; * provide a platform for discussion of quality automated typography; * serve as a meeting place for people who want the best possible typography for the languages and writings of the world; * organise congresses and trainings for users and ConTeXt developers to meet; * provide financial support to those involved in documentation and ConTeXt development, including through their participation in conferences; * produce and sell printed materials on ConTeXt; * sell advertising items for ConTeXt. The more members we have, the more we can do. If you are not a member already, please consider registering at https://group.contextgarden.net/register.shtml Membership fees are €40 per year for normal members, €20 for students, and €200 for institutions and corporations. = That’s all for now = Keep happy ConTeXting! Best wishes, Taco

1 0

Convert SVG to MetaPost
by Jon Wong 13 Aug '19

13 Aug '19

Hi all, Is it possible to convert SVG to MetaPost? Currently, I have Bash scripts in my workflow to invoke Inkscape (converting SVG to PDF). I don’t like to allow shell access to TeX. If I can convert SVG to MetaPost, I will gladly Git-track MetaPost files instead of SVG files. That will do away with having to convert SVG into PDF (via Inkscape). Regards Jon

4 5

Typesetting hebrew in a table...
by Willi Egger 12 Aug '19

12 Aug '19

Hi all, my brother is studying Ifrith and wants to have a dictionary. The idea is to typeset left German and right Ifrith in a /bTABLE…\eTABLE environment. When trying to typeset the Ifrith text is not broken into lines correctly i.e. it is leaping into the cell reserved for the German text. — How to correct this behaviour? I attach a rather minimal sample. Kind regards! Willi

2 2

texexec is deprecated?
by Jon Wong 12 Aug '19

12 Aug '19

Hi all, I did a quick standalone install of Mark IV: ```shell mkdir ~/context cd ~/context wget http://minimals.contextgarden.net/setup/first-setup.sh sh first-setup.sh --modules=all --context=current --engine=luatex’) ``` Set the correct paths and env in `~/.bashrc': ```shell # Add ConTeXt platform=osx-64 PATH=~/context/bin:~/context/tex/texmf-$platform/bin:$PATH source ~/context/tex/setuptex export PATH ``` (By the way, the latest lmtx installer is missing the `setuptex' file.) I was able to use `context’ but not `texexec’. The latter (`texexec —pdf test.tex’) tells me that some format file (`cont-en.fmt’) can’t be found. Is `texexec’ obsolete? The 2013 ConTeXt manual still uses it, though. Regards Jon

2 1

Re: [NTG-context] white space after a float in a column
by Sytse Knypstra 12 Aug '19

12 Aug '19

Hi all, In my recent question I had overlooked the possibility of using \startplaceintermezzo ... \stopplaceintermezzo and inserting a \blank before the \stopplaceintermezzo. Sorry for this stupid mistake and the noise. With kind regards, Sytse Knypstra

1 0

Some macros (Metafun)
by Fabrice Couvreur 12 Aug '19

12 Aug '19

Hello, In the Metafun manual, Hans uses macros like drawpath p ; drawcontrollines p ; drawpoints p ; drawcontrolpoints p ... How to use them in a document ? Where to find source codes ? For example, the following code does not work : \starttext \startuseMPgraphic{path} path p ; p := (1cm,1cm)--(1.5cm,1.5cm)..(2cm,0cm)..cycle ; \stopuseMPgraphic \startMPcode p := p .. cycle ; swappointlabels := true ; drawpath p ; \stopMPcode \stoptext Thank you Fabrice

2 3

Re: [NTG-context] Wrong MetaPost text output
by Henri Menke 11 Aug '19

11 Aug '19

On 8/11/19 10:51 AM, Hans Hagen wrote: > I'll do this (lmtx): > > metapost > use 'textext(.....)' instead of 'btex ..... etex' > metapost > rewrapping btex ... etex at the outer level [[dummy]] > metapost > rewrapping btex ... etex at the outer level [["foo"]] > metapost > rewrapping btex ... etex at the outer level [[bar]] > > when this is seen > > def drawtest = > draw btex dummy etex shifted (0,0); > draw btex "foo" etex shifted (1.5cm,0); > draw btex bar etex shifted (3cm,0); > enddef; > > rewrapping can work kind of ok, but it is still more fragile than textext (which can also be used with variables and concatinated strings and such, which probably is what one wants to do in macros) Thank you for the quick repsonse. This looks good to me. However, could you tell me a way to get the correct baseline with textext? When I use \startMPpage draw btex dummy etex shifted (0,0); draw btex foo etex shifted (1.5cm,0); \stopMPpage the baseline is the one that I would expect from TeX, i.e. at the depth of the “y” is removed or otherwise correctly accounted for. In contrast when I use \startMPpage draw textext("dummy") shifted (0,0); draw textext("foo") shifted (1.5cm,0); \stopMPpage the baseline will be below the depth of the “y” which is sometimes unwanted. > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > -----------------------------------------------------------------

2 1

Wrong MetaPost text output
by Henri Menke 11 Aug '19

11 Aug '19

Dear devs, There seems to be a bug in the MetaPost integration of ConTeXt. The MWE below should produce three different labels “dummy foo bar” but instead produces “bar bar bar”. The same example works correctly in plain MetaPost. Originally reported on https://tex.stackexchange.com/questions/503773/strange-behaviour-of-the-bte… Cheers, Henri --- \starttext \startMPpage def drawtest(expr i) = %i is not used here draw btex dummy etex shifted (0,0); draw btex foo etex shifted (1.5cm,0); draw btex bar etex shifted (3cm,0); enddef; drawtest(5); \stopMPpage \stoptext

2 1

white space after a float in a column
by Sytse Knypstra＠home.nl 10 Aug '19

10 Aug '19

Dear list members, I am struggling with floats in a two-column layout. I understand that there are three up-to-date mechanisms for columns: columnsets, pagecolumns and pagegrids. However, in neither setup I succeed in producing some extra vertical whitespace after the float if a caption is omitted (i.e. location=none in \setupcaption). My example:   \definepapersize[square21][width=21cm,height=21cm]  \setuppapersize[square21][square21]  \definecolumnset[Two][n=2]  \setupcolumnset[Two]  \setupcaption[intermezzo][location=none,spaceafter=1cm]  % no value for spaceafter seems to work \setuptolerance[verytolerant,stretch]  \setupframedtexts[frame=on,corner=round,width=local]  \setuplayout[grid=yes]  \starttext  \startcolumnset[Two]  \input knuth \par   \placeintermezzo[bottom][]{}  \startframedtext  \input tufte \par  \stopframedtext   \input knuth \par  \stopcolumnset \stoptext If 'columnset' is replaced everywhere by 'pagecolumns' or by 'pagegrid' through a find-and-replace operation, the result remains identical. Is it possible to insert more vertical white space after the intermezzo? A secondary remark: \placeintermezzo always puts the framed text at the top of the next column, no matter whether the parameter is top or bottom. But this is not a big deal. Sytse Knypstra

1 0

[feature] update
by Floris van Manen 09 Aug '19

09 Aug '19

I do a daily update of the context distribution using the command sh ./first-setup.sh --modules=all --engine=luatex This works well, but is rather verbose on the screen. Would it be possible to have a less verbose version? Or that the script could check some kind of a checksum before deciding to download all data? Or download only part of the data (saving on some carbon footprint ;-) Thanks. .Floris

2 2

XML/HTML output of Math
by Atsuhito Kohda 09 Aug '19

09 Aug '19

Hi all, I used to compile a beamer file with LuaLaTeX to generate a PDF for presentation then convert the beamer file to XHTML with LaTeXML for Web page. Recently I begin to use ConTeXt so I try to get a PDF for presentation and also XML/HTML output from a single ConTeXt file. I have a few questions about XML/HTML output of Math. 1. In case inline math mode with \displaystyle, we get wrong output of "\int_a^b"; lower limit and upper limit are interchanged and further "b" is a bit larger and an integral symbol is rather small. (It looks "\displaystyle" is not effective, e.g see "\frac".) In case display math mode, we get very weird output of "\int_a^b". It is difficult to explain how weird it is but something like an output of "b_{\int}^a". Please check an attatched sample. We get the similar kind of weird output of "\sum_{n=0}^{\infty}". Due to these, it is impossible to use XML/HTML output of ConTeXt in real use. 2. \math{\Vmatrix{\vI, \vj, \vk; a_{1}, a_{2}, a_{3}; b_{1}, b_{2}, b_{3}}} \vI, \vj, \vk are disappeared in xml/html output. What happend? BTW, if we put "a" (or any alphabet?) in fron of \vI, then we get every elements (but of course we get unnecessary "a" also). ------------- bSample \setupbackend[export=yes] \definemathmatrix[vmatrix][matrix:bars] [simplecommand=Vmatrix] \define[1]\vsym{\text{\math{\bi #1}}} \define\vI{\vsym{i}} % \define\vi{\vsym{i}} \define\vj{\vsym{j}} \define\vk{\vsym{k}} \starttext A simple math. \m{y=\sin x}, \m{\displaystyle y=\frac{\log x}{x}}, \m{\mathbf{A+B=C}}, \m{\mathbb{R}}, \m{\mathfrak{A}}, \m{\mathcal{S}}, A bit complex math. \m{\displaystyle\int_{a}^{b}x\sin x\,dx=-[x\cos x]_{a}^{b}+\int_{a}^{b}\cos x\,dx} \startformula \int_{a}^{b}x\sin x\,dx=-[x\cos x]_{a}^{b}+\int_{a}^{b}\cos x\,dx \stopformula \m{\displaystyle\sum_{n=0}^{\infty}\frac{x^n}{n!}} \startformula \sum_{n=0}^{\infty}\frac{x^n}{n!} \stopformula \math{\Vmatrix{\vI, \vj, \vk; a_{1}, a_{2}, a_{3}; b_{1}, b_{2}, b_{3}}} \math{\Vmatrix{a\vI, \vj, \vk; a_{1}, a_{2}, a_{3}; b_{1}, b_{2}, b_{3}}} \stoptext ------------- eSample Thanks in advance. Best regards, Atsuhito Kohda

3 5

align figures verticaly centered in \startcombination mode
by Jeong Dal 08 Aug '19

08 Aug '19

Dear all, In the following example, “align=middle” works for horizontal center. Is there any way to align two figures with different height in vertically centered? Thank you. Best regards, Dalyoung \useMPlibrary[dum] \setupinteraction[state=start] \usemodule[pre-60] \setupcombination[align=middle] \starttext \StartSteps \startplacefigure[] {\startcombination[2*2] {{\externalfigure[bogus][width=.3\makeupwidth]}{}\FlushStep} {{\externalfigure[bogus][height=.1\makeupheight]}{}\FlushStep} {{\externalfigure[bogus][width=.3\makeupwidth]}{}\FlushStep} {{\externalfigure[bogus][width=.3\makeupwidth]}{}\FlushStep} \stopcombination} \stopplacefigure \StopSteps \stoptext

2 1

Question to a table
by Ursula Hermann 07 Aug '19

07 Aug '19

Hello list! I have: \starttext \setupcombination [location=top, distance=\spaceamount] \bTABLE[align=flushleft,columndistance=0.1em] \bTR \bTD[width=2cm] Small \eTD \bTD[width=0.05\textwidth] \eTD \eTR \eTABLE \stoptext I have a question tot he sencond bTD [with 0.05\textwidth] \eTD, because: I would like to know: how can I put two different colors in this second bTD, should I do this like an overlay? There is not any text there. So that i have as an example to the list, pink and mystirose together, in one peace of the table without any text. Many thanks to the list Uschi

2 1

Bug in LMTX: Color is lost after linebreak
by Henri Menke 07 Aug '19

07 Aug '19

Dear devs, there seems to be a bug in LMTX. In the MWE below, the letter right after the linebreak is black instead of gray. I'm using the latest beta. mtx-context | main context file: /opt/context-lmtx/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2019.07.24 11:31 mtx-context | main context file: /opt/context-lmtx/tex/texmf-context/tex/context/base/mkiv/context.mkxl mtx-context | current version: 2019.08.02 19:50 Cheers, Henri --- \starttext \startstandardmakeup[align=middle] \tfd\setupinterlinespace \color[middlegray]{% Why is the letter right after the linebreak not gray?} \stopstandardmakeup \stoptext

2 1

Typesetting Markdown – Part 7: Mathematics
by Thangalin 07 Aug '19

07 Aug '19

https://dave.autonoma.ca/blog/2019/08/06/typesetting-markdown-part-7/ This installment tackles a cost-benefit analysis problem comparing electric to gasoline-powered vehicles, calls into R for amortization, typesets math and a repayment schedule, continues to explore the separation of content from presentation, and expands on the shell scripts from previous parts. Feedback is welcome, especially about the ConTeXt-related items (see Style and Math near the bottom). Thanks for reading!

1 0

Nested Column Layout
by Walter Mays 06 Aug '19

06 Aug '19

Hello all, I am trying to lay out a page that has a 2/3 column split, and then nest another set of 3 columns inside the larger of the two outer columns. In case that's not clear, I've attached a PNG that shows approximately what I would like to achieve. Here's what I've tried: ``` \defineparagraphs[TwoThirds][n=2] \setupparagraphs[TwoThirds][1][width=0.33\textwidth] \starttext \startTwoThirds \input tufte \nextTwoThirds \input tufte \startcolumns[n=3] \input tufte \stopcolumns \stopTwoThirds \stoptext ``` Instead of doing what I described, it made the contents of that inner column very narrow, but does not split it across columns. The \column command seems to have no effect. Thank you for your help, Walter

2 1

lmtx
by Hans Hagen 05 Aug '19

05 Aug '19

Hi, As we're progressing with the lmtx project (aka luametatex + context) the codebase gets adapted a bit. There are a few things that you need to keep an eye on: - As we test with lua 5.4 it can be that you need to wipe the cache after an update due to differences in byte code. This is only needed when you run into issues. At some point there might be a split in lua code (for luatex and luametatex) as 5.2 (luajittex, not evolving), 5.3 (luatex, stable frozen) and 5.4 (luametatex, experimental progressing) have a couple of different properties that we might want to benefit from. - The code base gets split in "Mark Four" and "Mark Fourty" files. Some of these are permanent, some can be temporary. It can for instance relate to features in and experiments with the engine. The only convenient way to test things is in 'real situations' and often issues can be solved fast. - As we're experimenting with metafun (and luagraph and ...) we also explore new interfaces. This results in a different codebase but should go unnoticed for existing code. Of course metafun 2.0 (hip and modern internet version speak) can bring interesting new things in the end. As usual, happy testing. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Captions with background
by Henning Hraban Ramm 04 Aug '19

04 Aug '19

Hi, in my books I typeset captions onto full page images, therefore I need a background; in the attached example it’s just a white box, usually I use a MetaPost shadow (some of you helped me with that a few years ago, current code see https://wiki.contextgarden.net/Drop_shadows) Now, the background should just enclose the text, not more. Since I don’t know how long the caption will be (I use the whole setup in a macro), I need a \vbox within \setlayer, but that always uses the full \textwidth, regardless of width settings of \framed. If the caption is short, the box should be minimal. Is this possible? Even better would be a textbackground just behind the text lines. Unfortunately my MP foo is not up to the task, the rectangular shadow was hard enough, but I’d try. There’s an example in details.pdf, but I don’t understand how I could manipulate the path around the text (not: paragraph). The example shows another problem: If you run it with --mode=arrange, the bleed is cut off. Is this a matter of settings or a bug? Greetlings, Hraban

2 2

lmtx: img?
by Henning Hraban Ramm 03 Aug '19

03 Aug '19

Hi, when I try to compile my books with lmtx, it chokes on my Lua image library. Seems like "img" (esp. img.scan) is gone. Is there a replacement? Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

2 3

\setupheadertexts \setupfootertexts
by Alan Braslau 03 Aug '19

03 Aug '19

Hello, \setupheadertexts [{center}] sets a centered header (and wipes-out any left and right header) \setupheadertexts [{left}] [{right}] sets the left and right headers (and keeps the centered header) \setupheadertexts [{left odd}] [{right odd}] [{left even}] [{right even}] sets the left and right headers for even and odd pages (perhaps I have this backwards?) (1) It would be useful to have \setupheadertexts [{left}] [{center}] [{right}] but this does not work. In this case, we probably also need a *six* argument version (even/odd). (2) It would also be useful that \setupheadertexts [{center}] NOT wipe-out left and right if they are set (but I could live with this perhaps historical behavior if we were to have (1).) (3) It is a bit messy that one must use \setupheader [] \setupheader [left] [right] *two calls* in order to have no centered header. (Again, I could live with \setupheader [left] [] [right] if we were to have (1).) Similarly for footertexts, of course. What is the reasoning, presently? ALTERNATIVELY (or additionally), we could have \setupheadertexts [center={center}, left={left}, lefteven={left, even}, ...] which would be even cleaner. Thanks, Alan

3 8

about SimpleSlides
by Atsuhito Kohda 03 Aug '19

03 Aug '19

Hi all, SimpleSlides is very useful for novice users so I do use it. But I encountered few problems which, I'm afraid, might be known. When we use a style BigNumber (or Embossed), an error occured: --------- tex error > tex error on line 87 in file /usr/share/texmf/tex/context/third/simpleslides/s-simpleslides-BigNumber.tex: ! Undefined control sequence l.87 \beginOLDTEX --------- I modified s-simpleslides-BigNumber.tex as follows: comment out from line #87 to #99 % \beginOLDTEX ... % \endLUATEX except line #98 \definefontsynonym [BigNumberFont] [name:texgyreherosbold] then it seems to work fine. But I suspect unconditional definition is not good so I'd like to know the correct fix. Another problem is with style Split. Browsing simpleslides.pdf, I think date, author, title and page number should be displayed on each slide but, in fact, we can't see them except page number. It seems, e.g. the following in s-simpleslides-Split.tex fails to get the "date". draw \sometxt[simpleslides:sometxt:left]{\getvariable{simpleslides:title}{date}} I think it is very helpful to see date, title on a slide so I'd like to know the fix. Thanks in advance. Best regards, Atsuhito Kohda

2 1

Figure labels in combinations
by Luca Mauri 30 Jul '19

30 Jul '19

I am trying to typeset two or more figures next to each other, inside a floating environment, each with its own label. I am familiar with a mechanism of the form \startplacefigure[reference=pic] \startcombination[3*1] {figure 1}{a} {figure 2}{b} {figure 3}{c} \stopcombination \stopplacefigure which then requires \in{figure}{b}[pic] to reference, as documented on the context wiki. The problem with this mechanism is that if figure 2, say, is moved elsewhere and ts label becomes "d", all references to it have to be corrected by hand. Is there a mechanism to reference directly the figures inside, without having to depend on the outer float? What I am thinking of, is an hypothetical "\placeinlinefigure" command, so that one could write, in analogy with \placefigure, \startplacefigure[number=no] \startcombination[3*1] {\placeinlinefigure[pic1]{figure 1}}{} {\placeinlinefigure[pic2]{figure 2}}{} {\placeinlinefigure[pic3]{figure 3}}{} \stopcombination \stopplacefigure so that one could then use \in[pic1] Of course, there is then the issue of having the ability to use the same counter of the placefigure environment, and of disabling the combination caption. I could not find anything along these lines in the documentation; also tried to concoct a "nonfloating" float or to use an enumeration, but was not able to come up with a solution. Luca

2 2

(again) inmargin attachments in notes
by Pablo Rodriguez 30 Jul '19

30 Jul '19

Hi Hans, I have the following sample: \showframe\showgrid \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \setupattachment[location=inmargin] \starttext a\attachment[file=xml-mkiv.pdf] b\footnote{\attachment[file=i-context.pdf]} \stoptext Inmargin attachment from notes aren’t shown in Acrobat nor displayed in margin. Files are embedded. I have a bunch of documents (over 100) in which I have to embed other PDF documents and I need them to be in the marginal space from notes. Sorry for reporting this again (https://mailman.ntg.nl/pipermail/ntg-context/2019/094337.html) but this issue is relevant for me. Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

In a two column layout, activate line numbering for one column only
by Oliver von Criegern 30 Jul '19

30 Jul '19

Dear list members, I am trying to recreate a layout for some dictionary with ConTeXt. It is a two column layout with line numbering between the columns, that is, there is only one numbering for both columns. How can I do this with ConTeXt? I would need either an option to activate line numbering only for one column, which, as far as I can see, does not exist; or I could use the "command" option for "\setuplinenumbering" to make the line numbers dissappear for one column, but then I would need some way to decide whether a line number belongs to the first or to the second column, some command that returns to me the number of the actual column, which I can't find, too. For illustration, I give a minimal example: ||\setuppapersize[A4][A4]\setupbodyfont[9pt]|| |||\setupcolumns[n=2, distance=1cm, ]\setuplinenumbering[step=5, method=page, location=right, align=flushright, width=.25cm]\starttext\startcolumns\startlinenumbering\dorecurse{10}{\inputlorem}\par\stoplinenumbering\stopcolumns\stoptext||| In the result, there are (as is to be expected) line numbers between both columns and also to the right of the second column. How can I get rid of the latter ones? (For the pdf result see also: https://tex.stackexchange.com/questions/501269/context-how-to-have-line-num…) Best regards, Oliver. ||

1 0

consecutive full stops in "num" bib style after "et al"
by Sanjoy Mahajan 30 Jul '19

30 Jul '19

In the "num" bibliography style, bibliography entries that get "et al."ed (the author list is too long and "et al." is inserted) end up with two full stops in a row. Here's a minimal example: \setupbibtex[database=tmp] \setuppublications[alternative=num] \setuppublicationlist[artauthoretallimit=3, authoretaldisplay=3, editoretaldisplay=3, artauthoretaldisplay=3, % authoretaltext={ et al}, % artauthoretaltext={ et al}, ] \starttext Test \cite[Larkin:1980]. \blank[big] \placepublications[criterium=text] \stoptext (The tmp.bib file is attached.) The bibliography entry is: [1] Jill Larkin, John McDermott and Dorothea P. Simon et al.. Expert and novice performance in solving physics problems. Science, 208(4450):1335--1342, 1980. The doubled full stop can be fixed by commenting in the two lines % authoretaltext={ et al}, % artauthoretaltext={ et al}, Should these commented-in settings be the default for the "num" style (because it'll always put one more full stop between the author list and the title)? Another workaround is never to use et al. But that idea failed when I had to cite the Nobel-Prize-winning gravity-wave paper ("Observation of Gravitational Waves from a Binary Black Hole Merger"). It has, I think, 1000 authors! -- -Sanjoy <http://savelongwharfpark.org/> Save Long Wharf Park in Boston Harbor! <http://streetfightingmath.com/> Six reasoning tools to make hard problems easy.

2 2

about SimpleSlide
by Atsuhito Kohda 29 Jul '19

29 Jul '19

Hi all, SimpleSlide is very useful for novice users so I do use it. I'm afraid these might be known but I encountered few problems. When we use a style BigNumber or Embossed, an error occured: --------- tex error > tex error on line 87 in file /usr/share/texmf/tex/context/third/simpleslides/s-simpleslides-BigNumber.tex: ! Undefined control sequence l.87 \beginOLDTEX --------- I modified s-simpleslides-BigNumber.tex as follows: comment out from line #87 to #99 % \beginOLDTEX ... % \endLUATEX except line #98 \definefontsynonym [BigNumberFont] [name:texgyreherosbold] then it seems to work fine. But I suspect unconditional definition is not good so I'd like to know the correct fix. Another problem is with style Split. Browsing simpleslides.pdf, date, author, title and page number would be displayed on each slide but we can't see them in fact except page number. It seems, e.g. the following in s-simpleslides-Split.tex fails to get the "date". draw \sometxt[simpleslides:sometxt:left]{\getvariable{simpleslides:title}{date}} I think it is very helpful to see date, title on a slide so I'd like to know the fix. Thanks in advance. Best regards, Atsuhito Kohda

1 0

ConTeXt Group Newsletter July 2019
by Taco Hoekwater 29 Jul '19

29 Jul '19

In this newsletter: * 2018 journal progress * 2017 journal articles * ConTeXt Meeting 2019 updates * Board elections * Becoming a CG member * Membership promo action = 2018 journal progress = Our next ConTeXt Group journal issue is finished! It will go off to the printer today, with expected delivery to our members at or around the next meeting in September. The Table of Contents is already online at: https://articles.contextgarden.net/journal/2018.html The PDFs are not yet publicly available but current CG Members can send me an email for an advance copy of any of the article PDFs. If you are not a member, you will have to wait until summer 2020. = 2017 journal articles = Also on the articles site: we enabled the pdf downloads for the articles in the 2017 journal: https://articles.contextgarden.net/journal/2017.html = ConTeXt Meeting 2019 updates = Hans plans to do a number of announcements about the future of ConTeXt, LuaTeX and MetaPost (LMTX) which should be exciting you as well! If you have not registered yet, please consider joining us at ’t Sjetootje, Bassenge-Boirs, Belgium on September 16–21, 2019. Some other ‘surprise' talks have been added to the abstracts page, and submissions are still welcome as there is still some room in the program. (not that free time cannot be filled with Hans talking, but we have to consider the health condition of his throat.) The ConTeXt meeting is an excellent way to get help with any problems you may have in ConTeXt, to learn about future directions of ConTeXt and LuaTeX, or just to talk and have a drink with other ConTeXt users. You do not have to be a ConTeXt Group member to attend the meeting, but members do get a meeting fees discount worth more than the CG membership fees for a year. In fact, if you attend for the very first time, there is an extra discount for that as well. For registration and other information, see the website at https://meeting.contextgarden.net/2019 The 13th ConTeXt Meeting is sponsored by Dante e.V (www.dante.de) and NTG (www.ntg.nl) as well as by Pragma ADE (Hans & Ton) and Bittext (Taco). We are very grateful to all our sponsors! = Board elections = The ConTeXt meeting is also the location of the annual CG membership meeting. This year, no less than four board members are forced to resign according to the bylaws. We are looking for CG members to help fill those spots in the board. If you are interested in joining the CG board, please send a message to any of the current board members and we will get in touch with you. We can really use the help! Our previous newsletter already provided one tentative new board member, but ideally we would like at least one more candidate. = Becoming a CG member = Our official stated purpose: * to promote the ConTeXt typographic system; * provide its users with infrastructure and information; * support its development; * provide a platform for discussion of quality automated typography; * serve as a meeting place for people who want the best possible typography for the languages and writings of the world; * organise congresses and trainings for users and ConTeXt developers to meet; * provide financial support to those involved in documentation and ConTeXt development, including through their participation in conferences; * produce and sell printed materials on ConTeXt; * sell advertising items for ConTeXt. The more members we have, the more we can do. If you are not a member already, please consider registering at https://group.contextgarden.net/register.shtml Membership fees are €40 per year for normal members, €20 for students, and €200 for institutions and corporations. = Membership promo action = Our 50th active member is David Neubauer, and he will get his fees for 2018-2019 waived. Congratulations to David (and CG itself)! = That’s all for now = Keep happy ConTeXting! Best wishes, Taco Taco Hoekwater Elvenkind BV

1 0

Override MathML formula label
by Duncan Hothersall 29 Jul '19

29 Jul '19

Hi all. In processing MathML if I want a formula to be numbered I add a label="X" attribute to the <formula> tag as per: \usemodule[mathml] \starttext \xmlprocessdata{}{<formula label='X'> <math xmlns='http://www.w3.org/1998/Math/MathML'> <mi>p</mi><mo>=</mo><mi>c</mi><mo>-</mo><mi>t</mi> </math> </formula>}{} \stoptext This will label the formula as (1). I know I can adjust how the automatic numbering is generated using \setupformulae, but how can I override the label used for a specific formula, say to set it to (36A)? Basically I have a setup where formulae are mostly numbered sequentially but occasionally individual formulae need to have an out-of-sequence or differently formatted number. Thanks as ever for any help. Duncan

2 2

grid+formulas: bug or expected behavior?
by Luca Donetti 26 Jul '19

26 Jul '19

Dear all, I'm typesetting a document with grid layout and some formulas, like in the minimal example below: %%%%%%%%%%%%%%%%%%%%%%%%%%%% \setuplayout[grid=yes] \showgrid \starttext \input knuth %\blank \startformula a = b + c \stopformula \input knuth \stoptext %%%%%%%%%%%%%%%%%%%%%%%%%%%% I don't have any specific need for the alignment of the formula with respect to the grid, but I expect the text below the formula to be on the grid. However, I've not been able to achieve that with any of the layout options described in the latest "details.pdf" manual: in all cases I've tried the text below the formula doesn't "sit" on the grid. While I do not understand this behavior, I've thought that it could be the intended one, because this is what happens in chapter 4 of the "details" manual. Then, I noticed that in older versions of the same manual (for example the one included in texlive 2017) the behavior shown in chapter 4 is the one I expect: the text after formulas is aligned to the grid. So I'm a bit puzzled: should the text after formulas be aligned to the grid or not? Is this a (known?) bug or intended behavior? If this is the expected behavior, I can live with that because by trial and error I found a workaround. If I employ a \blank command before the formula (as in the commented line in the above example), the text after the formula is "correctly" aligned. Thank you in advance. LD

3 3

Re: [NTG-context] grid+formulas: bug or expected behavior?
by Luca Donetti 26 Jul '19

26 Jul '19

> > I don't have any specific need for the alignment of the formula with > > respect to the grid, but I expect the text below the formula to be on the > > grid. However, I've not been able to achieve that with any of the layout > > options described in the latest "details.pdf" manual: in all cases I've > > tried the text below the formula doesn't "sit" on the grid. > > Looking through my unread ML mails, I saw nobody answered to you. > > Did you try enclosing your formulae in \startlinecorrection ... > \stoplinecorrection ? > AFAIK that should do the job. > > Greetlings, Hraban > > Thank you Hraban, Indeed what you suggest works. If I write: \startlinecorrection \startformula a = b + c \stopformula \stoplinecorrection the text below the formula is correctly aligned to the grid. However, what puzzles me is that the version _without_ \startlinecorrection ... \stoplinecorrection works with an old version of context (from texlive 2017). Moreover, i guess this is not something due to my setup, because I observe the same (or at least very similar) behavior in the chapter of the details.pdf manual about grid and math. In the attached screenshot I show the first page of such chapter in the version shipped with a recent beta (on the left) and with texlive 2017 (on the right). While in the old version the text after the formulas is aligned to the grid, in the new version of the manual this is not the case: the text is not aligned. Is this a known (documented?) change or an unnoticed regression? Thank you in advance, LD

2 1

some mac fonts do not work correctly
by Ulrike Fischer 25 Jul '19

25 Jul '19

Hello Hans, we got a bug report that some (proprietary) mac fonts don't work correctly. The reason seem to be that the OpenType cmap format used by these fonts isn't supported by the fontloader. The necessary cmap formats are "platform 0 (Unicode), encoding 1 (Unicode 1.1(?)), format 12" and maybe as a fallback "platform 1 (Mac), encoding 0 (Roman), format 0". A test would be \starttext \font\oddfont="Big Caslon Medium" \oddfont A \stoptext (I don't have a mac and so couldn't check) The bug report we got is here https://github.com/u-fischer/luaotfload/issues/73 -- Ulrike Fischer https://www.troubleshooting-tex.de/

2 5

currently supported platforms
by Henning Hraban Ramm 24 Jul '19

24 Jul '19

Hi, I just checked the list of supported platforms in the wiki (https://wiki.contextgarden.net/ConTeXt_Standalone#Supported_platforms) and in the setup folder (http://minimals.contextgarden.net/setup/) there were several differences. I tried to update, this is now in the wiki: Supported platforms Platform Short name Notes Windows mswin from W32TeX Windows/CygWin cygwin Linux, 32-bit linux Debian 8 Linux, 64-bit linux-64 Debian 8 Linux, ARM (low end.) linux-arm Raspbian 8 Linux, musl linuxmusl-64 Alpine Mac OS X, Intel (64-bit) osx-64 Mac OS X 10.6 FreeBSD, 32-bit freebsd FreeBSD, 64-bit freebsd-amd64 OpenBSD 6.5, 32-bit openbsd6.5 OpenBSD 6.5, 64-bit openbsd6.5-amd64 Solaris, Intel solaris-intel Solaris 10 on OpenCSW Solaris, Sparc solaris-sparc Solaris 10 on OpenCSW I.e., I replaced OpenBSD 6.3 and 6.4 with 6.5 and added CygWin and Linux MUSL. Is "Alpine" correct for MUSL? There are additional versions win32 and win64 - what’s the difference to mswin? Are those also from W32TeX? In the wiki it says kfreebsd would be still supported via Debian - is this still true? BTW is there any chance to get "first-setup.sh --context=date" back? Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

3 3

Re: [NTG-context] [dev-context] type key in \setupattachment
by Hans Hagen 24 Jul '19

24 Jul '19

On 6/19/2019 9:28 PM, Pablo Rodriguez wrote: > Hi Wolfgang, > > this comes from a previous message from this mailing list > (https://mailman.ntg.nl/pipermail/dev-context/2019/003574.html) which I > needed a long while to understand 😅. > > Would it be possible that the \setupattachment command has a "type" key > to specify its MIME type? (Default should be "application/octet-stream" > [or so it seems].) > > This is required to add the value to the /Subtype entry in the > /Embeddedfile dictionary > (https://www.adobe.com/content/dam/acom/en/devnet/pdf/PDF32000_2008.pdf#name…) > > This is optional information in PDF-1.7, but required in PDF/A-2. > > Many thanks for your help, there is a type key ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

4 3

background problem with layers
by Peter Rolf 23 Jul '19

23 Jul '19

Hi, I have a problem with a not printed color background when using layers. Small test file is attached. ConTeXt version: 2019.07.16 18:23 Peter

4 4

\glueexpr in lmtx
by Marcel Fabian Krüger 23 Jul '19

23 Jul '19

Hi, I stumbled upon some odd behaviour of \glueexpr in lmtx. Take the following document: \starttext \the\glueexpr 0.0pt \relax \newskip\myskip \myskip=\glueexpr 0.0pt \relax \stoptext Without lmtx this works fine. Under lmtx, the *first* use of `\glueexpr`, after `\the`, works fine too. On the other hand, the other `\glueexpr`, after `\myskip=`, complains about a "Illegal unit of measure (pt inserted)". It does not seem to accept the fractional part, everything works again if I use \starttext \the\glueexpr 0.0pt \relax \newskip\myskip \myskip=\glueexpr 0pt \relax \stoptext Am I missing something here or is this a bug? Best regards, Marcel Krueger

2 2

Re: [NTG-context] Place footnote after reference
by Huseyin Özoguz 23 Jul '19

23 Jul '19

Thank Taco, that worked in the example, of course the general problem stays (thanks to Rik Kabel, too). But with your suggestion I dicovered a interesting behaviour, see this example: \showgrid \setupnote[footnote][before=] \starttext \input tufte \input tufte \footnote{Footnote 1} \input tufte \input tufte \dorecurse{35}{Blub or what }\footnote{Footnote 2} That does\footnote{Footnote 3} only\footnote{Footnote 4} work in special cases. \stoptext Now Context indeed sets the third and fourth footnote on the second page, but leaves the reference to them on the last line of the first page. This is exactly the behaviour I want in general. Could we force that? /For testing: /If we add another footnote in the example above, it fails again - despite of the possibility to just typeset the lines exactly like in the example above, just move the footnotes on the next page, not the references - here might be some logic-mistake at work, because there should be no difference in my opinion between the examples: \showgrid \setupnote[footnote][before=] \starttext \input tufte \input tufte \footnote{Footnote 1} \input tufte \input tufte \footnote{Footnote extra} \dorecurse{35}{Blub or what }\footnote{Footnote 2} That does\footnote{Footnote 3} only\footnote{Footnote 4} work in special cases. \stoptext -- Huseyin Özoguz E-Mail: h.oezoguz(a)mmnetz.de

1 0

Re: [NTG-context] Place footnote after reference
by Huseyin Özoguz 23 Jul '19

23 Jul '19

Hi, > But I admit that I do not understand the problem all that well. I have > never run into a situation where I want the footnote to explicitly > *not* appear with its reference (except in endnotes). If my grid > settings were that specific, I would be using endnotes anyway. I have this problem everywhere in a 400-page project with hundrets of footnotes and no special grid settings at all. How would you solve this situation (my minexamle): \showgrid \starttext \input tufte \input tufte \footnote{Footnote 1} \input tufte \input tufte \dorecurse{35}{Blub or what }\footnote{Footnote 2} \input tufte \stoptext The problem is, that Context (or Tex) skips lines, which is poor typesetting, too many even than necessary in some cases, and that is not suitable. Endnotes are no solutions aswell, I need footnotes. So the solution to have reference and footnote not on the same page seems the least bad workaround, if possible at all. Thanks Huseyin -- Huseyin Özoguz E-Mail: h.oezoguz(a)mmnetz.de

4 4

Place footnote after reference
by Huseyin Özoguz 22 Jul '19

22 Jul '19

Hello, ConText seems to try to place the footnote on the same page as the footenotereference. See this example: \showgrid \starttext \input tufte \input tufte \footnote{Footnote 1} \input tufte \input tufte \dorecurse{35}{Blub or what }\footnote{Footnote 2} \input tufte \stoptext But that results into one (or two?) fewer line on the first page. Is there a possibility to implement the following rule? -> NEVER move lines onto the next page to achieve footnote and reference beging on the same page. If necessary set the footnote on the next page, after the reference. Or would you suggest a better solution? I have a book with grid=yes, so the default-setting is not suitable. Thanks Huseyin -- Huseyin Özoguz E-Mail: h.oezoguz(a)mmnetz.de

5 4

Unwanted white box above float
by Duncan Hothersall 22 Jul '19

22 Jul '19

Hi all. Have been experimenting with the many and varied options for placefloat to try to resolve this problem with no success. As per minimal example below I have nearly what I'm after - an image which floats to the right of a background box with a 1em offset - but I can't get rid of the white box which appears above it no matter what permutations I try. (Secondary query: why do I have to set leftoffset=, rightoffset= etc. individually for the text background? offset= seems to have no effect.) Thanks for any help you can offer. \definetextbackground[TintBoxedBackground] [background=color, backgroundcolor=cyan, frame=off, leftoffset=1em, rightoffset=1em, topoffset=1em, bottomoffset=1em, location=paragraph] \definefloat[thematicimage][figure] \setupfloat[thematicimage] [default=right,none}, offset=1em, margin=0em, background=color, backgroundcolor=cyan, rightmargindistance=-1em] \starttext \starttextbackground[TintBoxedBackground] {\bf Lorem ipsum dolor sit amet}\blank \placethematicimage{}{\externalfigure[cow][width=0.30\makeupwidth]} Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. \stoptextbackground \stoptext Duncan

2 2

Re: [NTG-context] [Context] Xindy
by Gour 22 Jul '19

22 Jul '19

>>>>> "Mojca" == Mojca Miklavec <mojca.miklavec.lists(a)gmail.com> writes: Mojca> Hello Gour, This is not a question for this mailing list, but Mojca> rather for Hans himself. OK. Mojca> ConTeXt doesn't use makeindex, so I don't really understand your Mojca> complaints about makeindex. Well, I mentioned 'makeindex' in the context of the tool which cannot properly handle Unicode, afaik. Mojca> What features exactly do you miss? I'm not sure if indexing-feature in ConTeXt allow me to use English, Croatian and Sanskrit diacritics (not Devanagari) all in one document and define that I want e.g. that \'{s}, \d{s} has to be sorted under 'Š' ? In short, xindy allows one to define his own sort-rules. Mojca> It makes no sense to discuss distributing something before it can Mojca> be used with ConTeXt.) Right, that's why also asked "Now I'm interested how is support for Xindy in ConTeXt" hoping that the context-distribution list has enough knowledgeable people able to answer it. Excuse me for the noise...redirecting to other list... Sincerely, Gour -- Gour | Zagreb, Croatia | GPG key: D19DB797 ----------------------------------------------------------------

6 6

VORG and vmtx table in fontloader
by Hironori KITAGAWA 22 Jul '19

22 Jul '19

Hello all, It seems that ConTeXt's fontloader (hence luaotfload's fontloader) skips to load the VORG table and topSideBearing in the vmtx table These informations are used to get the vertical origin of a glyph. > readers.vorg = function(f,fontdata,specification) > reportskippedtable(f,fontdata,"vorg",specification.glyphs) > end > readers.vmtx = function(f,fontdata,specification) > ... > for i=0,nofmetrics-1 do > ... > if vheight ~= 0 and vheight ~= vdefault then > glyph.vheight = vheight > end > -- if topsidebearing ~= 0 then > -- glyph.tsb = topsidebearing > -- end I don't know whether vertical metrics are used in ConTeXt. But, they will be useful for other packages (e.g., LuaTeX-ja) to improve vertical typesetting. Regards Hironori KITAGAWA <h_kitagawa2001(a)yahoo.co.jp>

1 0

footnotes in columns not working
by Charles Doherty 22 Jul '19

22 Jul '19

Dear Hans, I have been typesetting a Newsletter using ConTeXt since 2003. I have updated the programme regularly and made adjustments to my template as needed. Following the most recent update I have problems with footnotes in columns. Depending on the number and length of the footnotes I have varied between placing them at the end of each column or as a list at the end of each page using: \setupnote[footnote][location=columns] or commenting out %\setupnote[footnote][location=columns] to get what I need. In the attached image I had commented out %\setupnote[footnote][location=columns] expecting to get footnotes arranged one beneath the other at the bottom of the page but I get them in two columns and both run off the page. Can you help on this? I attach an .png of the result. Thanks, Charlie

2 1

font switching commands
by Atsuhito Kohda 22 Jul '19

22 Jul '19

Hi all "Manuals-ConTeXt wiki" provides us very important and useful information and we find cont-eni.pdf in "overview". In the manual, font switching commands \vi, \vii, \viii, \ix, \x, \xi, \xii are explained in p.113 but it seems they don't work except \vi and \xi. >From my simple test with ConTeXt, \xi produces a greek letter "ξ" as in traditional TeX and \vi seems to do nothing. Is the above explanation obsolete or is additional setup necessary? I'd like to know what is the real situation of these commands. Thanks in advance. Best regards, Atsuhito Kohda

3 6

Quotation marks
by Dmitry Starostin 21 Jul '19

21 Jul '19

I understand it might have been deliberately and for various reasons, but ConTeXt has no analogue for {``} and {''} for quotes. \quotation is a replacement, but it is awkward if you write a draft in ConTeXt and make the final variant in pdfLatex. Is there a ready solution for the quotation marks as marked out in the text? Or one needs to write his own macro for this?

6 9

Issue with \hbox attrSomeAttr=Val (LTMX only)
by Joseph Canedo 20 Jul '19

20 Jul '19

Dear list With LMTX the Following MWE does not seem find attribute value (it does with luatex 1.10) \defineattribute[MarginNode][public] \newbox\MyBox \startluacode local nuts = nodes.nuts local margin_node_attr = attributes.public('MarginNode') function test_attribute(box_id) local box = nuts.takebox(box_id) local margin_node = nuts.getattr(box, margin_node_attr) context('Expected 555=' .. (margin_node or '(nil)')) end \stopluacode \starttext Test. \the\MarginNodeattribute \setbox\MyBox\hbox attr\the\MarginNodeattribute=555{Test} \ctxlua{test_attribute(\the\MyBox)} \stoptext Thanks

2 1

Side figure bug in mkiv?
by Duncan Hothersall 19 Jul '19

19 Jul '19

I think I have identified a bug in the side figure mechanism which is demonstrated by the minimal example below. The {\bf …} construct causes the para in which it appears to stop behaving properly with the side figure, and the text overflows. The preceding and following paras which don't have {\bf …} do behave properly. I wondered if emphasis like \bf should be done differently (with a start/stop mechanism?) in mkiv, but I found nothing to suggest it. \starttext Blah blah. \placefigure[right,none]{}{\externalfigure[cow][width=0.30\makeupwidth]} Blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah. Blah blah blah blah blah blah blah blah. {\bf Blah blah} blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah. Blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah blah. \stoptext Thanks for any help. Duncan

4 6

preventing page break
by Floris van Manen 19 Jul '19

19 Jul '19

Hello List, What is the preferred way in context to prevent a page break happening between the heading(s) of a section and, for instance, the first 3 lines of the following paragraph? \section(one) \subsection(one two} %--- no page break here One two three for ... One two three for ... One two three for ... %- from here page breaks allowed Thanks .Floris

2 1

Using \currentreferencenumber triggers “has a hidden number” in log file
by Marco Patzer 18 Jul '19

18 Jul '19

Hi, I use \enabletrackers [structures.referencing.empty] to catch references by number to sections without a number. The log file contains “has a hidden number…” in that case. I have a command that uses \currentreferencenumber which triggers the “has a hidden number…” warning in the log file. But that command takes care not to output the contents of that variable. But merely using it in an \doif\currentreferencenumber is sufficient to trigger the log message. Example: \enabletrackers [structures.referencing.empty] \def\foo[#1]{%% \doifreferencefoundelse{#1}{%% \doifelse\currentreferencenumber\emptyreference {Foo}{Bar}}%% } \setuphead [section] [number=no] \starttext \startsection [title=Foo, reference=sec:foo] \samplefile{knuth} \stopsection \foo[sec:foo] \stoptext Then check the log file for “has a hidden number”. 1) How to not trigger the log message when checking \currentreferencenumber? Or alternatively 2) Is there a better way to find invisible references? Marco

1 0

Column spacing in MathML in mkiv
by Duncan Hothersall 18 Jul '19

18 Jul '19

Hi all. If I want to set the space between columns in a MathML <mtable>, how do I do it? Minimal non-working example below (set the attribute columnspacing to anything you like and it seems to be ignored). Is this a bug or is there a feature I've missed? \usemodule[mathml] \starttext \xmlprocessdata{}{<formula> <math xmlns='http://www.w3.org/1998/Math/MathML'> <mtable columnalign="right center left" columnspacing="1em"> <mtr> <mtd><mi>a</mi><mi>b</mi></mtd> <mtd><mo>=</mo></mtd> <mtd><mi>c</mi><mi>d</mi></mtd> </mtr> <mtr> <mtd><mi>e</mi><mi>f</mi></mtd> <mtd><mo>=</mo></mtd> <mtd><mi>g</mi><mi>h</mi></mtd> </mtr> </mtable> </math></formula>}{} \stoptext Many thanks. Duncan

1 0

[OT] veraPDF v1.14
by luigi scarso 18 Jul '19

18 Jul '19

https://www.pdfa.org/verapdf-1-14-released/ -- luigi

1 0

bug with fonts in LMTX (Win7)?
by Pablo Rodriguez 18 Jul '19

18 Jul '19

Hi Wolfgang, I’m afraid LMTX cannot use \ss and \cg fonts in this sample (on Win7): \definefontfamily[mainface][rm][TeX Gyre Heros] \definefontfamily[mainface][mm][TeX Gyre Termes Math] \definefontfamily[mainface][ss][Gill Sans MT][tf=file:GIL_____.TTF] \definefontfamily[mainface][tt][Cousine] \definefontfamily[mainface][cg][Arial Narrow][tf=file:ARIALN.TTF] \setupbodyfont[mainface] \startbuffer \ConTeXt\ is awesome!\par \stopbuffer \starttext \startTEXpage[offset=1em] \getbuffer \ss\getbuffer \tt\getbuffer \cg\getbuffer \stopTEXpage \stoptext The fonts are there (as reported in https://mailman.ntg.nl/pipermail/ntg-context/2019/094955.html) I don’t know whether this issue could be fixed. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

Spacing after combination
by Marco Patzer 16 Jul '19

16 Jul '19

Hi! Is there a way to influence the spacing after a combination is placed? \useMPlibrary [dum] \starttext \startcombination [2*2] \startcontent \externalfigure \stopcontent \startcaption Foo \stopcaption \startcontent \externalfigure \stopcontent \startcaption Bar \stopcaption \startcontent \externalfigure \stopcontent \startcaption Lorem \stopcaption \startcontent \externalfigure \stopcontent \startcaption Ipsum \stopcaption \stopcombination \samplefile{knuth} \stoptext I know I could wrap it in a float and use the float to control the spacing, but it would be great if I could do without that float. Marco

4 4

Theses Examples
by Thangalin 16 Jul '19

16 Jul '19

Hi all! I know of two people who are considering writing their theses using ConTeXt. I've started to update the wiki with a list: https://www.contextgarden.net/Sample_documents#Theses Any others to add to the list? Thank you.

1 0

Columnsets not balanced
by Sytse Knypstra＠home.nl 15 Jul '19

15 Jul '19

Dear list, In the following example I would like to have the two columns balanced, i.e. with equal number of lines in both columns. But contrary to the option in the definition, all text is put in the leftmost column and the right-hand column remains empty. \definecolumnset[Two][balance=yes] \starttext \startcolumnset[Two] \input knuth \stopcolumnset \stoptext How can I automatically obtain balanced columns? Sytse Knypstra

2 1

noindent vs noindentation in strc-con
by Aditya Mahajan 12 Jul '19

12 Jul '19

Hi, Why do all the rendering setups in strc-con.mkvi use \noindent? Can the \noindet be replaced by \noindentation? \noindent has some side effects. For example, consider this recent question on TeX.SE: https://tex.stackexchange.com/questions/499464/context-empty-line-in-enumer… which basically boils down to the difference between: \showboxes \starttext \noindent \inmargin{Example 1} \startitemize \item This is how enumeration works. \stopitemize \inmargin{Example 2} \startitemize \item This works correctly \stopitemize \stoptext Note that the first example has an extra space before the itemize. In principle, replacing \noindent by \noindentation fixes the extra line break, but it does not work with enumerations because it uses \inmargin[scope=local]: \showboxes \starttext \noindentation \inmargin[scope=local]{Example 1} \startitemize \item This is how enumeration works. \stopitemize \inmargin[scope=local]{Example 2} \startitemize \item This works correctly \stopitemize \stoptext where the box containing "noindentation" is misgligned. So, two questions: * Why is \noindent used instead of \noidentation? * Is there a bug with scope=local? Aditya

1 0

reference containing parentheses causes trouble
by Sanjoy Mahajan 12 Jul '19

12 Jul '19

Dear List, Warning: The following may be a bug or feature or just my misunderstanding! It seems that parentheses cause trouble in references. MNWE: \starttext \section[sec:one(two)]{One} As you see in sec.~\in[sec:one(two)], \stoptext The "in sec.~\in[sec:one(two)]" typesets as "in sec. ??" and the log shows: references > start missing references references > 1 [][sec:one(two)] references > stop missing references (It all works fine upon deleting "(two)" throughout.) Is this behavior known and expected? If it is, I'll add a note to the "References" page on the wiki. -Sanjoy

6 9

registers: subentry indentation different from word--number gap?
by Sanjoy Mahajan 12 Jul '19

12 Jul '19

I don't think the current behavior is a bug, so the following is a feature request: With the following fairly minimal example \setupregister[index][indicator=no, distance=0.5em] \starttext ABC\index{x}DEF\index{x+yyz} \blank \placeindex \stoptext the distance parameter sets (1) the hanging indentation of the 'yyz' subentry and also (2) the distance between an entry and its pagenumber. (That's what a look at strc-reg.mkiv shows too.) It's a matter of taste, but my eye thinks that 0.5em is right for no. 2, but too small for no. 1 -- whereas the default (1em) is just right for no. 1 but too large for no. 2. Thus, could the two dimensions be decoupled and bcome settable indepently? Perhaps keep 'distance' for the entry--pagenumber distance (no. 2), which is its meaning on the wiki, and invent 'subdistance' for the hanging indent (no. 1)? I've just realized a cheap hack to do the same, so maybe it's not worth messing with backward compatability by adding a new parameter. The hack: \def\blah#1{#1\hskip-0.5em} \setupregister[index][indicator=no, distance=1em, textcommand=\blah] -- -Sanjoy <http://savelongwharfpark.org/> Save Long Wharf Park in Boston Harbor! <http://streetfightingmath.com/> Six reasoning tools to make hard problems easy.

1 0

Typesetting Markdown – Part 6: Computation
by Thangalin 11 Jul '19

11 Jul '19

This part of the series describes a way to produce and typeset dynamic documents using R Markdown and ConTeXt. https://dave.autonoma.ca/blog/2019/07/11/typesetting-markdown-part-6/ Comments or suggestions for improvement?

1 0

Strange error updatng LMTX
by Andres Conrado 11 Jul '19

11 Jul '19

When updating my LMTX installation today, I got this: tex error > tex error on line 179 in file /home/conrado/Apps/lmtx/tex/texmf-context/tex/context/base/mkiv/strc-flt.mkvi: ! Undefined control sequence <argument> \c!compressdistance =\emwidth \mult_interfaces_get_parameters_item ...2->\if ,#1 ,\expandafter \mult_interf... \mult_interfaces_get_parameters_indeed ...tem #1,] , \setup_float ...es_get_parameters {\??float :}[#1] \the \everysetupfloat \fi ... <to be read again> \syst_helpers_double_empty_two_nop \par l.179 169 \c!bottomoffset=\zeropoint, 170 \c!freeregion=\v!yes, 171 %\c!local=, 172 %\c!bottombefore=, % e.g. \vfill 173 %\c!bottomafter=, 174 %\c!default=, % default location 175 \c!sidethreshold=.5\strutdp, % set to "old" to check with old method 176 \c!numbering=\v!yes, 177 \c!compress=\v!yes, % when possible pack floats when flushing 178 \c!compressdistance=\emwidth] 179 >> 180 \setupfloatframed 181 [\c!frame=\v!off, 182 \c!offset=\v!overlay, 183 \c!strut=\v!no] 184 185 \appendtoks 186 \doifelse{\floatparameter\c!compress}\v!yes\settrue\setfalse\c_page_floats_pack_flushed 187 \d_page_floats_compress_distance\floatparameter\c!compressdistance\relax 188 \to \everysetupfloat 189 The control sequence at the end of the top line of your error message was never \def'ed. If you have misspelled it (e.g., '\hobx'), type 'I' and the correct spelling (e.g., 'I\hbox'). Otherwise just continue, and I'll forget about whatever was undefined. Seems to affect the floats mechanism. Andrés Conrado Montoya http://chiquitico.org

3 2

Split extreme tables across tables
by Thangalin 11 Jul '19

11 Jul '19

The following document does not split across tables, which is a little surprising: \starttext \startplacetable[title={Average Annual Temperatures}] \startxtable \startxtablehead[head] \startxrow \startxcell[align=middle,width={0.10\textwidth}] Year \stopxcell \startxcell[align=middle,width={0.14\textwidth}] Value \stopxcell \stopxrow \stopxtablehead \startxtablebody[body] \dorecurse{100}{% \startxrow \startxcell[align=middle,width={0.10\textwidth}] 1880 \stopxcell \startxcell[align=middle,width={0.14\textwidth}] 0.1146 \stopxcell \stopxrow} \stopxtablebody \startxtablefoot[foot] \startxrow \startxcell[align=middle,width={0.10\textwidth}] 2018 \stopxcell \startxcell[align=middle,width={0.14\textwidth}] 1.014 \stopxcell \stopxrow \stopxtablefoot \stopxtable \stopplacetable \stoptext I'd have thought the default behaviour would be to split because the alternative is for the table content to scroll into the footer and off the page. A fix is to use: \startplacetable[title={Average Annual Temperatures}, location={split}] However, when the document is generated using pandoc, injecting location={split} is not feasible. It would be convenient if there was a way to use setups to override the location option for \startplacetable. Henri Menke provided a work around: let\oldstartplacetable\startplacetable \unexpanded\def\startplacetable{\dosingleempty\newstartplacetable} \def\newstartplacetable[#1]{\oldstartplacetable[#1,location={split}]} See: https://tex.stackexchange.com/a/499453/2148 This does the job, but it doesn't feel like the ConTeXt way. How would you use setups to enable page splitting on extreme tables? Thank you!

1 2

an object representation of the node list of a paragraph: a lua table or a JSON
by mf 10 Jul '19

10 Jul '19

Hello list, i'd like having an object representation of a typeset paragraph or even a page, preferably as a JSON object, but a Lua table is equally good. My reference is section "4.4 Node lists" of the CLD manual. Before writing an iterator over the list of nodes of a paragraph, figuring out all the possible nodes and their fields, i'm wondering if there's some hidden tool in the ConTeXt coffer to simplify the task. Best wishes, Massimiliano

2 1

Fwd: [garden] debug getinfo error
by Taco Hoekwater 10 Jul '19

10 Jul '19

> Begin forwarded message: > > From: Husum42(a)t-online.de > Subject: [garden] debug getinfo error > Date: 10 July 2019 at 11:52:55 CEST > To: gardeners(a)contextgarden.net > > > There is a lua error after "debug.getinfo()". Why? > > Thanks for help > G.Lauber > > ------------------------- > mtx-context | run 1: luatex --fmt="/opt/context/beta-2018.09.01/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="texweb" --lua="/opt/context/beta-2018.09.01/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --c:currentrun=1 --c:fulljobname="./texweb.tex" --c:input="./texweb.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:texmfbinpath="/opt/context/beta-2018.09.01/tex/texmf-linux-64/bin" "cont-yes.mkiv" > > This is LuaTeX, Version 1.10.1 (TeX Live 2019) > system commands enabled. > open source > level 1, order 1, name '/opt/context/beta-2018.09.01/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv' > system > > system > ConTeXt ver: 2019.07.04 12:29 MKIV beta fmt: 2019.7.10 int: english/english > system > > system > 'cont-new.mkiv' loaded > open source > level 2, order 2, name '/opt/context/beta-2018.09.01/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' > system > beware: some patches loaded from cont-new.mkiv > close source > level 2, order 2, name '/opt/context/beta-2018.09.01/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' > system > files > jobname 'texweb', input './texweb', result 'texweb' > fonts > latin modern fonts are not preloaded > languages > language 'en' is active > open source > level 2, order 3, name '/tmp/uhd8RE/texweb.tex' > fonts > preloading latin modern fonts (second stage) > fonts > 'fallback modern-designsize rm 12pt' is loaded > > lua error > lua error on line 6 in file /tmp/uhd8RE/texweb.tex: > > [ctxlua]:1: attempt to call a nil value (field 'getinfo') > > 1 % generated by live script > 2 \setupexternalfigures[location={local,global,default}] > 3 \starttext > 4 \startlua > 5 debug.getinfo(2) > 6 >> \stoplua > 7 \stoptext > 8 > > mtx-context | fatal error: return code: 256 > > Taco Hoekwater Elvenkind BV

2 1

index page ranges where start page == end page
by Sanjoy Mahajan 10 Jul '19

10 Jul '19

The following probably well known minimal example \starttext \startregister[index][key1]{an entry}\input knuth\stopregister[index][key1] \placeindex \stoptext produces the index entry "an entry 1--1", where the page range should be just a single page. A question (and then two workarounds): Could ConTeXt automatically change such page ranges to the single page ("an entry 1")? Meanwhile, a couple of workarounds: In the MkII (pre-lua) days, I wrote a shell/sed/awk/perl script that converted the .pdf file to text, grepped for (strings that are likely to be) page ranges, and spat out lines where the page range should be a page. (Those days were so long ago that I've forgotten the script's language.) Then I would manually find and change the corresponding \startregister[index] in the source to a plain \index (and delete the corresponding \stopregister). In these MkIV days, with the index data in a lua table, I've been playing with the following python2 script that parse the .tuc file to spit out the same information slightly more reliably. In the next step, coming soon, the script will check that each \seeindex entry points to an actual entry and also that each \seeindex{also ...} entry originates from an actual entry (otherwise it shouldn't be "also"). The script requires the slpp package; pip install git+https://github.com/SirAnthony/slpp The parser in the script has a bug in that it doesn't handle minus signs in the lua table, maybe everywhere or maybe only some of them, so the script replaces them with "_" before sending the data to the parser (a terrible hack). To run the script: python check-index.py < file.tuc Here is check-index.py: # parse lua-format index-entry table extracted from book.tuc to check # that each xref points to an actual entry, and that, further, "see # also" src entries have at least one page ref (perhaps in subtree) # due to bug in slpp parser: replace "-" (minus signs) in data with "_" from slpp import slpp as lua from sys import stdin,stderr import re def tuclist2entry(l): return '+'.join(l) data = [] intro_re = r'utilitydata.structures.registers.collected\s*=' in_register_data = False for l in stdin: if re.match(intro_re, l): in_register_data = True data.append(re.sub(intro_re,'',l)) elif in_register_data: data.append(l) if re.match(r'}$', l): in_register_data = False data = re.sub("-", "_", ''.join(data)) dict = lua.decode(data) index = dict['index'] entries = [] xrefs = [] for entry in index['entries']: src = [x[0] for x in entry['list']] refs = entry['references'] if 'seeword' in entry: dest = entry['seeword']['text'] xrefs.append((src,dest)) else: page = refs['realpage'] if refs.get('lastrealpage',None) == page: print "silly range:", tuclist2entry(src) entries.append(src) for xref in xrefs: print tuclist2entry(xref[0]),'->', xref[1]

1 0

Is it possible to define a float environment that uses 2 captions? (and another question)
by Andres Conrado Montoya 09 Jul '19

09 Jul '19

I'm working on a book that uses tables and figures, but the editors want to use to diffferent captions for each figure: one as usual, with the float description and number, and another one with a "Source" for said float. Something like: --------------------------------- | | | Float | | | --------------------------------- Figure 1: The float description. Source: The float source. I know i can do it by hand, inserting line breaks in the caption and so on. But I was wondering if there is a programmatic way to do it, so I can, for example, change the "Caption" position to be above the float, but have the "Source" below it. LIke: Figure 1: The float description. --------------------------------- | | | Float | | | --------------------------------- Source: The float source. I've been reviewing the Wiki, but so far I have no idea how to approach it. Any recommendation will be very appreciated. Thank you for your time. Andrés Conrado Montoya Andi Kú andresconrado(a)gmail.com http://sesentaycuatro.com http://messier87.com http://chiquitico.org ---------------------------------------- Los fines no justifican los medios, porque la medida verdadera de nuestro carácter está dada por los medios que estamos dispuestos a utilizar, no por los fines que proclamamos. ---------------------------------------- “You develop an instant global consciousness, a people orientation, an intense dissatisfaction with the state of the world, and a compulsion to do something about it. From out there on the moon, international politics look so petty. You want to grab a politician by the scruff of the neck and drag him a quarter of a million miles out and say, ‘Look at that, you son of a bitch.’” — Apollo 14 astronaut Edgar Mitchell

1 0

Re: [NTG-context] Typesetting Markdown – Part 5: Interpolation
by Andres Conrado 09 Jul '19

09 Jul '19

Thank you. I still don't really understand why can't you have a "presentational" yaml file and a "content" yaml file (I do it like that... I have a "variables.yaml" file for content and a "settings.yaml" file for presentational stuff, and use a "template.context" file with all my mapped variables within the ConTeXt code, and compile everything using pandoc). But I guess you want to do it this way. Or maybe I'm not really understanding your process. It's quite interesting in any case, and I'm learning a lot. Thanks for sharing. Andrés Conrado Montoya http://chiquitico.org

1 0

Re: [NTG-context] Typesetting Markdown – Part 5: Interpolation
by Andres Conrado 09 Jul '19

09 Jul '19

You can do it on the template... you can use a yaml variable to determine if the toc should be printed or not. Like so: yaml file: --- toc: true ... template file: %%%%%%% $if(toc)$ \completecontent $endif$ %%%%%%% Andrés Conrado Montoya http://chiquitico.org El lun., 8 jul. 2019 a las 2:52, <ntg-context-request(a)ntg.nl> escribió: > Send ntg-context mailing list submissions to > ntg-context(a)ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request(a)ntg.nl > > You can reach the person managing the list at > ntg-context-owner(a)ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Re: Typesetting Markdown – Part 5: Interpolation > (Aditya Mahajan) > 2. Re: Typesetting Markdown – Part 5: Interpolation (Thangalin) > 3. Re: Typesetting Markdown – Part 5: Interpolation > (Aditya Mahajan) > 4. request for \definefontfamily and \definefallbackfamily > (Pablo Rodriguez) > 5. Re: crappy names in the fontloader (Hans Hagen) > 6. problems with images, layers and crop marks (Henning Hraban Ramm) > 7. Re: problems with images, layers and crop marks (Hans Hagen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 7 Jul 2019 10:17:31 -0400 (EDT) > From: Aditya Mahajan <adityam(a)umich.edu> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Typesetting Markdown – Part 5: > Interpolation > Message-ID: <nycvar.YAK.7.76.1907071012590.13567@nqv-guvaxcnq> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > On Sat, 6 Jul 2019, Thangalin wrote: > > > Hello again! > > > > This part of the series describes how to reference *interpolated* strings > > inside Markdown documents. > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > > > There's a section at the end about eliminating the table of contents > from a > > reusable document template. I would have preferred using setups, rather > > than redefining the \completecontent macro, but didn't see an obvious way > > to do so. > > Why not simply omit \compltecontent from the pandoc template? > > Aditya > > > > ------------------------------ > > Message: 2 > Date: Sun, 7 Jul 2019 11:58:12 -0700 > From: Thangalin <thangalin(a)gmail.com> > To: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Subject: Re: [NTG-context] Typesetting Markdown – Part 5: > Interpolation > Message-ID: > <CAANrE7qd81BudwSHBWufu=MpDDUPn5fh8ZBM63qLVZ160gZH= > g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Thank you Aditya. > > The main.tex file is meant to be reusable for different document styles. By > removing \completecontent altogether from the main template, it would > preclude a different document from reusing the main.tex template with a > table of contents. I'd like the template to be "reusable"; making > modifications to "main.tex" --- or creating a copy --- would subvert that > goal. > > On Sun, Jul 7, 2019 at 7:17 AM Aditya Mahajan <adityam(a)umich.edu> wrote: > > > On Sat, 6 Jul 2019, Thangalin wrote: > > > > > Hello again! > > > > > > This part of the series describes how to reference *interpolated* > strings > > > inside Markdown documents. > > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > > > > > There's a section at the end about eliminating the table of contents > > from a > > > reusable document template. I would have preferred using setups, rather > > > than redefining the \completecontent macro, but didn't see an obvious > way > > > to do so. > > > > Why not simply omit \compltecontent from the pandoc template? > > > > > > >

2 1

interfaces.definecommand fails with brackets inside string arguments
by mf 09 Jul '19

09 Jul '19

Hello list, i've played a bit with interfaces.definecommand, that lets you define TeX macros from lua (see the "ConTeXt Lua Documents", 7.3 User interfacing). I found that the commands defined by interfaces.definecommand fail when you pass string arguments that contain brackets. I think cldf-int.lua needs a patch to support those kind of arguments. In the meantime it's possible to bypass the problem passing arguments with brackets inside double braces, as in the MWE attached. Best wishes, Massimiliano

3 3

Typesetting Markdown – Part 5: Interpolation
by Thangalin 08 Jul '19

08 Jul '19

Hello again! This part of the series describes how to reference *interpolated* strings inside Markdown documents. https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ There's a section at the end about eliminating the table of contents from a reusable document template. I would have preferred using setups, rather than redefining the \completecontent macro, but didn't see an obvious way to do so. Thoughts?

2 4

From mkii to mkiv: MathML mtable alignment
by Duncan Hothersall 08 Jul '19

08 Jul '19

The command \setupMMLappearance[mtable][alternative=b] used to give me, in mkii, MathML layouts in which the first column was ragged left, the second column centred, and the third column ragged right. It now seems to be ignored, and the output has all three columns centred. Minimal working example showing the problem: \usemodule[mathml] \setupMMLappearance[mtable][alternative=c] \starttext Some text. \xmlprocessdata{}{<formula> <math xmlns='http://www.w3.org/1998/Math/MathML'> <mtable> <mtr> <mtd> <mi>x</mi> <mo>+</mo> <mi>y</mi> </mtd> <mtd> <mo>=</mo> </mtd> <mtd> <mn>2.56</mn> <mtext> million</mtext> </mtd> </mtr> <mtr> <mtd> <mi>x</mi> </mtd> <mtd> <mo>=</mo> </mtd> <mtd> <mn>2.56</mn> </mtd> </mtr> </mtable> </math> </formula>}{} Some more text. \stoptext What is the successor to \setupMMLappearance please? Thanks very much. Duncan

2 2

problems with images, layers and crop marks
by Henning Hraban Ramm 08 Jul '19

08 Jul '19

Hi all, I’m quite quiet at the moment, because I can access my mailing list address only via inconvenient webmail; since I updated MacOS, neither Apple Mail nor Thunderbird will take my password anymore... :-(( Besides, I’m currently well paid for working with LaTeX, and my other projects get less time. Anyway, one of our authors finally submitted her final corrections, and "of course" my ConTeXt setup that still worked well in May doesn’t behave any more: * stacked layers won’t work on the first page (there should be a title bar above an image; it works on the back cover, but not on the front; but I can enable one of both layers) That might be related to: * on some right pages, including p.1 (cover), crop marks are shifted one page width to the right. * on some pages, crop marks are shifted vertically; might be related to using \offset for image placement. I’m trying to cook up MWEs, but the behaviour is so strange and irregular, that I don’t know if I can reproduce it in a simpler environment... I suspect my combined use of postponing, makeups, layers and \offset might have grown side effects since May. Any ideas? Greetlings, Hraban Greetlings, Hraban Grüßlinge, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD

2 4

crappy names in the fontloader
by Marcel Fabian Krüger 08 Jul '19

08 Jul '19

Hi everyone, under default settings, the fontloaders discards all glyph names which are considered "crappy", meaning matching the "p_crappyname" pattern in "font-oup.lua". For some names this makes a lot of sense. For example the name "uni0303" is considered "crappy" and it really provides no useful information. Then there are other names like "t_uni0303" which are still considered "crappy" while they actually aren't completely useless. So I think there would be some value in preserving them. Of course, you can always enable "otf.keepnames" if you need names like this. But I actually want to talk about another class of names: Look at "Udotbelow". This is IMHO a perfectly normal and useful name, but the fontloader still considers it "crappy" because it starts with a "U" followed by a letter which could be a hexadecimal number. I think this is a bit over-agressive. Maybe the "p_crappyname" pattern could be changed to only look for "u<hexadecimal>" if followed by "p_done", marking the end of a component? Best regards, Marcel Krüger

2 2

request for \definefontfamily and \definefallbackfamily
by Pablo Rodriguez 07 Jul '19

07 Jul '19

Hi Wolfgang, I have two requests to be implemented in \definefontfamily. The first one is that is able to load fonts not defined as entries in the font database. Here you have a minimal sample: \definefont[Test][file:texgyrepagella-regular.otf at 10pt] \definefont[TestOne][file:texgyrepagella-regular-500.otf at 10pt] \definefontfamily [mainface] [rm] [Pagella] [tf={file:texgyrepagella-regular.otf}, bf={file:texgyrepagella-regular-500.otf}] \setupbodyfont[mainface] \starttext normal\\ \bf bold not working\\ \Test this works \TestOne this works \stoptext The second one would be to allow method=uppercase to \definefallbackfamily, so it could be used to fake small caps (such as in https://mailman.ntg.nl/pipermail/ntg-context/2018/092878.html. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0