- ntg-context - Mailing Lists

Entity to receive donations?
by Jon Wong 27 Dec '19

27 Dec '19

Is there a formal entity for ConTeXt to receive donations? What about receiving earnings?

2 2

Adjust kern for one character
by Rik Kabel 26 Dec '19

26 Dec '19

List, Is there a way in ConTeXt to adjust the left-side kern for one character? The cap J in the font I am using is being set too close to the preceding characters and I would rather not insert a thinspace before each. (Inserting a thinspace is sufficient, but finer control is welcome.) -- Rik

6 11

[LMTX] core dumped
by Floris van Manen 26 Dec '19

26 Dec '19

the latest version of lmtx does not run, e.g. core dumped... any hints as how to fix this locally? .F This is LuaMetaTeX, Version 2.03.5 open source > level 1, order 1, name 'cont-yes.mkiv' Segmentation fault (core dumped) mtx-context | fatal error: return code: 35584 Exit status: 1 [15:30] vm @ vmz: ~/docs/tex [master]: Modified, Untracked $ context --version mtx-context | ConTeXt Process Management 1.03 mtx-context | mtx-context | main context file: /home/vm/data/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2019.07.24 11:31 mtx-context | main context file: /home/vm/data/context/tex/texmf-context/tex/context/base/mkiv/context.mkxl mtx-context | current version: 2019.12.24 20:09

2 2

Re: [NTG-context] \setupitemgroup[itemize],/setupitemize
by Wolfgang Schuster 24 Dec '19

24 Dec '19

Willi Egger schrieb am 18.12.2019 um 19:58: > Wolfgans, Hraban, > > thank you very much for this instruction! > > - In the real itemlist I have of course \startitemize (sorry for the ommission in the MWE > - I misinterpreted the Wiki. There is no mentioning in the red section that n is possible. However the n in the green section must be used as the symbol with n=123 or symbol=2. The n-key is used to set the number of columns when you set your items in multiple columns and it has the same effect as the two, three etc. keywords. The way how numbered items work is different. To change the symbol for the bullets or use numbers instead ConTeXt checks if the applies keywords include the name of a symbol (something you create with \definesymbol) or the name of a number conversion (something you create with \defineconversion) and applies it to the current entry. This check also you to create your own symbols or numbers orders by simply creating a new symbol and conversion. Wolfgang

2 1

Problem loading a font
by Mohammad Hossein Bateni 24 Dec '19

24 Dec '19

Hi, Here's a simple MWE: ============== \starttext Default {\definedfont[ALMFixed]ALM} Default \stoptext ============== I have the "ALM Fixed" font installed (otf from https://ctan.org/tex-archive/fonts/almfixed) I do not see any errors in the output. In particular, Context sees the font and the logs contain the following line: mkiv lua stats > loaded fonts: 3 files: almfixed.otf, latinmodern-math.otf, lmroman12-regular.otf Yet, the output from lmtx does not display the "ALM" string, though its place is reserved on the line. The same file typesets fine with mkiv. Thanks --MHB

2 1

Symbol Footnote Command
by Aykut Aykutt 23 Dec '19

23 Dec '19

Hi, I can change the mark of the second footnote from "2" to asterix by defining a conversion like so: %-- Working example, but it is not what I need -- \setupindenting[yes,small] \defineconversion[mymix][1,\m{*},2] \setupnotation[footnote][align={hz,hanging},indenting={yes,small,next},numberconversion=mymix] \startdocument This is the first sentence with a footnote.\footnote{This is the first footnote and its mark is "1".} This is the second sentence with a footnote.\footnote{This is the second footnote and its mark is "*". } This is the third sentence with a footnote.\footnote{This is the third footnote and its mark is "2". } \stopdocument Clearly this conversion repeats the marks "1", "*" and "2" repeatedly. Is there a way to define a new/special footnote command (say, "\symfootnote") which blends with normal footnotes, but prints footnotes with symbol marks (say, Set 2) and not with numbers. In other words, is it possible to achieve the same result as the working example above with something like the (pseudo) example below? %-- Pseudo example -- \setupindenting[yes,small] \def\symfootenote ?????????? \setupnotation[symfootnote][align={hz,hanging},indenting={yes,small,next}] \setupnotation[footnote][align={hz,hanging},indenting={yes,small,next}] \startdocument This is the first sentence with a footnote.\footnote{This is the first footnote and its mark is "1".} This is the second sentence with a footnote.\symfootnote{This is the second footnote and its mark is "*". } This is the third sentence with a footnote.\footnote{This is the third footnote and its mark is "2". } \stopdocument Thank you.

2 2

Using TestBackground inside Offset
by Jon Wong 23 Dec '19

23 Dec '19

Is it possible? I get “missing endgroup inserted” error.

2 1

Disappearing font feature
by Rik Kabel 23 Dec '19

23 Dec '19

List, I have a strange case of a font feature disappearing when many fonts are used. In creating a sampler for the Jost* font (free at https://indestructibletype.com/Jost.html) and using its feature ss01 to get single-storey lower-case a, the font reverts to the default two-storey a when many weights are shown. When I create the fonts with \definefontfamily, the upright weights are fine and the italic weights revert. When I create the fonts with \definefont, the reverse is the case. Below is the demonstration for the \definefont variation and a snip of the failing result. \definebodyfontenvironment[13pt] [interlinespace=15pt] \setuplayout [backspace=0pt, topspace=30pt, width=middle, height=middle, location=middle, header=0pt, footer=0pt] \setuppagenumbering [location=] \definefontfeature [default] [default] [ss01=yes] \definefont [JHair] [jost-100-hairline] \definefont [JThin] [jost-200-thin] \definefont [JLigh] [jost-300-light] \definefont [JBook] [jost-400-book] \definefont [JMedi] [jost-500-medium] \definefont [JSemi] [jost-600-semi] \definefont [JBold] [jost-700-bold] \definefont [JHeav] [jost-800-heavy] \definefont [JBlac] [jost-900-black] \definefont [JHairI][jost-100-hairlineitalic] \definefont [JThinI][jost-200-thinitalic] \definefont [JLighI][jost-300-lightitalic] \definefont [JBookI][jost-400-bookitalic] \definefont [JMediI][jost-500-mediumitalic] \definefont [JSemiI][jost-600-semiitalic] \definefont [JBoldI][jost-700-bolditalic] \definefont [JHeavI][jost-800-heavyitalic] \definefont [JBlacI][jost-900-blackitalic] \startbuffer [Sampler] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z à ë í ô ç 1 2 3 4 5 6 7 8 9 0 ` \texttilde\ - = ! @ \# \$ \letterpercent\ ^ \& * ( ) _ + [ ] \textbackslash\ ; ' , . / \{ \} \| : " < > ? \fontname\font \blank [line] \stopbuffer \setupalign [middle] \starttext \obeylines \JHair \getbuffer[Sampler] \JThin \getbuffer[Sampler] \JLigh \getbuffer[Sampler] \JBook \getbuffer[Sampler] \JMedi \getbuffer[Sampler] \JSemi \getbuffer[Sampler] \JBold \getbuffer[Sampler] \JHeav \getbuffer[Sampler] \JBlac \getbuffer[Sampler] \page \JHairI \getbuffer[Sampler] \JThinI \getbuffer[Sampler] \JLighI \getbuffer[Sampler] \JBookI \getbuffer[Sampler] \JMediI \getbuffer[Sampler] \JSemiI \getbuffer[Sampler] \JBoldI \getbuffer[Sampler] \JHeavI \getbuffer[Sampler] \JBlacI \getbuffer[Sampler] \stoptext Below is the demonstration for the \definefontfamily variation and a snip of the expected result, although the italics fail. \definebodyfontenvironment[13pt] [interlinespace=15pt] \setuplayout [backspace=0pt, topspace=15pt, width=middle, height=middle, location=middle, header=0pt, footer=0pt] \setuppagenumbering [location=] \definefontfeature [default] [default] [ss01=yes] \definefontfamily [up-one] [sansserif] [Jost] [tf={style:hairline,features}, bf={style:thin,features}, bi={style:light,features}, it={style:book,features}] \definefontfamily [up-two] [sansserif] [Jost] [tf={style:medium,features}, bf={style:semi,features}, bi={style:bold,features}, it={style:heavy,features}] \definefontfamily [up-three] [sansserif] [Jost] [tf={style:black,features}, bf={style:black,features}, bi={style:black,features}, it={style:black,features}] \definefontfamily [it-one] [sansserif] [Jost] [tf={style:hairlineitalic,features}, bf={style:thinitalic,features}, bi={style:lightitalic,features}, it={style:bookitalic,features}] \definefontfamily [it-two] [sansserif] [Jost] [tf={style:mediumitalic,features}, bf={style:semiitalic,features}, bi={style:bolditalic,features}, it={style:heavyitalic,features}] \definefontfamily [it-three] [sansserif] [Jost] [tf={style:blackitalic,features}, bf={style:blackitalic,features}, bi={style:blackitalic,features}, it={style:blackitalic,features}] \startbuffer [Sampler] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z à ë í ô ç 1 2 3 4 5 6 7 8 9 0 ` \texttilde\ - = ! @ \# \$ \letterpercent\ ^ \& * ( ) _ + [ ] \textbackslash\ ; ' , . / \{ \} \| : " < > ? \fontname\font \blank [line] \stopbuffer \setupalign [middle] \setupbodyfont [up-one,13pt] \starttext \obeylines \ss\tf\getbuffer [Sampler] \ss\bf\getbuffer [Sampler] \ss\bi\getbuffer [Sampler] \ss\it\getbuffer [Sampler] \switchtobodyfont [up-two] \ss\tf\getbuffer [Sampler] \ss\bf\getbuffer [Sampler] \ss\bi\getbuffer [Sampler] \ss\it\getbuffer [Sampler] \switchtobodyfont [up-three] \ss\tf\getbuffer [Sampler] \page \switchtobodyfont [it-one] \ss\tf\getbuffer [Sampler] \ss\bf\getbuffer [Sampler] \ss\bi\getbuffer [Sampler] \switchtobodyfont [it-two] \ss\tf\getbuffer [Sampler] \ss\bf\getbuffer [Sampler] \ss\bi\getbuffer [Sampler] \ss\it\getbuffer [Sampler] \switchtobodyfont [it-three] \ss\tf\getbuffer [Sampler] \stoptext Assistance or explanation is welcome. This is just for a sampler -- the font with just three weights when used in a real project is fine. I do not know if the problem is with the font or with ConTeXt or with my expectations. -- Rik

3 3

Tent style cards
by Pavneet Arora 22 Dec '19

22 Dec '19

Hello. I am trying to do up some tent style table place holder cards for my daughter's wedding, and have been wracking my brain for a solution for a couple of days now. Having tried many alternatives, this is the closest I have come up with. But mirroring doesn't work. If I use \setuparranging[2*4] mirroring works, but I only need tent style (1*2 head-to-head) so that I can trim to size. Any template that could be suggested would be most helpful as the wedding is on Mon (yikes!). advTHANKSance. >>>MWE<<< \definepapersize[tblcard][width=4in,height=3in] \setuppapersize[tblcard][letter,portrait] \setuparranging[2TOP] \setuplayout[ height=3in, width=4in, topspace=0in, header=0in, bottomspace=0in, footer=0in, backspace=0.0in, %% location=middle, marking=on, ] \startbuffer[tblcard] \strut \tfd A Name \stopbuffer \starttext \showframe \adaptpapersize[tblcard,mirrored][letter,portrait]\getbuffer[tblcard] \page \getbuffer[tblcard] \stoptext -- Pavneet Arora m: +1 647-406-6843 Waroc Informatik e: pavneet_arora(a)waroc.com

4 5

How to use together lmt_axis, lmt_grid and lmt_function
by Otared Kavian 22 Dec '19

22 Dec '19

Hi, I am experimenting the new LuaMetaTeX features introduced recently, but I can't get the built-in features together. To explain the problem I encounter, I want to draw the graph of a function on a grid in which the x-axis and the y-axis are alos drawn. Now lmtx has the « instances » (if I am not wrong…) named lmt_axis, lmt_grid and lmt_function which separately work fine, but I dont see how to use them simultaneously by keeping the correct scaling. In the minimal example below, copied from luametafun.pdf, the graph of the function $f(x) := (x - 1)^2$ should be drawn by showing its minimum at $x = 1$, and its value at $x = 0$ should be equal to 1. However the graph on the grid does not show this. Moreover the axes do not match the grid. This means that I have not understood how to give the same units and scales in the three instances lmt_axis, lmt_grid and lmt_function. Thanks for any help: Otared K. PS: here is a minimal example % begin grid-axis-function.tex \starttext \startplacefigure \startMPcode{doublefun} draw lmt_grid [ nx = 10, ny = 10, dx = 1, dy = 1 ] xsized 5cm withpen pencircle scaled .1pt withcolor "darkblue" ; draw lmt_axis [ nx = 10, ny = 10, dx = 1, dy = 1, ] xsized 5cm withpen pencircle scaled .5pt withcolor "darkred" ; draw lmt_function [ xmin = 0, xmax = 2, xstep = .05, ymin = 0, ymax = 1.5, code = "(x - 1)*(x - 1)", ] xsized 5cm withpen pencircle scaled .75pt ; \stopMPcode \stopplacefigure \stoptext % end grid-axis-function.tex

1 0

blank[\lineheight] works with LMTX, fails with MkIV
by Rik Kabel 21 Dec '19

21 Dec '19

MkIV fails with tex error > tex error on line 3 in file c://Users/micro/Desktop/fail.tex: ! Missing \endcsname inserted given the following mwe: \starttext a \blank[\lineheight] z \stoptext Not critical as there are lots of ways to do this, but it seems strange that it should work in one and not the other. -- Rik

3 2

Macro expansion macros not defined
by Jon Wong 21 Dec '19

21 Dec '19

expandtwoargsafter

2 1

How to get subsubject to show numbering in TOC?
by Jon Wong 20 Dec '19

20 Dec '19

Is it \setuplist[subsubject][headnumber=yes]?

2 1

setting the color of cropmarks
by mf 20 Dec '19

20 Dec '19

Hello list, \setuplayout[marking=on] typesets crop marks that are in grayscale black. Can I change their color, in particular into a CMYK black (0,0,0,1.0)? Thanks, Massi

4 9

Transparency in PNGs becomes black in PDF/X
by Henning Hraban Ramm 20 Dec '19

20 Dec '19

I think this is the same problem that I had in Bassenge: The transparent part of PNGs like the attached one becomes black if I try to make an PDF/X. I hope that is solvable... \setupbackend[format=PDF/X-1a:2001] \starttext \externalfigure[kinder/esel_kl] \stoptext Best, Hraban

4 4

Layer presets / size of type area
by Henning Hraban Ramm 20 Dec '19

20 Dec '19

Hi, I setup a layer to the size of the typearea and expect the corner presets to place my figures into the corners, but \makeupwidth/height are smaller than the typearea (same with \textwidth). Why? Hraban \setuplayout[ width=120mm, backspace=16mm, height=192mm, topspace=6mm, header=8mm, footer=6mm, ] \showframe \definelayer [TA] [x=16mm, y=14mm, width=\makeupwidth, height=\makeupheight] \setupbackgrounds[page][background=TA] \def\Square{\framed[width=1cm,height=1cm]{S}} \starttext \strut \setlayer[TA][preset=leftbottom]{\Square} \setlayer[TA][preset=rightbottom]{\Square} \setlayer[TA][preset=lefttop]{\Square} \setlayer[TA][preset=righttop]{\Square} \stoptext

2 1

accessing glyph in private area
by Pablo Rodriguez 20 Dec '19

20 Dec '19

Dear list, I have the following sample: \definefontfamily[emoj][rm][Noto Emoji] \setupbodyfont[emoj] \starttext 🔔💻🔨🔩 \utfchar{0x23f0} \utfchar{0xfe4eb}󾓦󾓧󾓨󾓩󾓪󾓫󾓬󾓭󾓮 \utfchar{0xfe4eb}󾓦󾓧󾓨󾓩󾓪󾓫󾓬󾓭󾓮 \stoptext Is there any way to access glyphs from the private area (0Xfe4eb in the sample) in ConTeXt? I would need to use these glyphs for a presentation I have. Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

Style for captions
by Otared Kavian 19 Dec '19

19 Dec '19

Hi all, In the example below, I would like to have the style of the figure's caption to be \itx, but the inline formula is set with a larger body font: is it possible to setup the caption of a float so that a smaller size applies also to the math formula? Best regards: Otared PS: here is the example (not so minimal, sorry…) % begin example-caption.tex \setupcaption[figure][ headstyle={\bix}, style={\itx}] \starttext \startluacode function weierstrass(n,x) local S = 0 for k = 0, n do S = S + 2^(-k)*math.cos(3^k*x) end return S end \stopluacode \startplacefigure[title={The Weierstrass function $\sum_{k=0}^n 2^{-k}\cos(3^kx)$}] \startMPcode{doublefun} draw lmt_function [ xmin = 0, xmax = 4*355/113, xstep =.001, ymin = -2, ymax = 2, sx = 1mm, xsmall = 80, xlarge = 20, sy = 4mm, ysmall = 40, ylarge = 4, xlabels = "yes", ylabels = "yes", linewidth = .015mm, offset = .1mm, code = "weierstrass(5,x)", frame = "sticks", xcaption = "$n = 5$", functions = { [ drawcolor = "darkred", ] } ] xsized .5TextWidth ; \stopMPcode \stopplacefigure \stoptext % begin example-caption.tex

3 6

Re: [NTG-context] Moving horizontally a whole ensemble of layers in the same run?
by Rudolf Bahr 19 Dec '19

19 Dec '19

On Tue, Dec 17, 2019 at 07:30:49PM +0100, Hans Hagen wrote: > you need to make a MWE to show what you mean > > normally > > \hbox to <somewidth>{\hss<come content>\hss} > > is good enough for centering Here is my MWE. Think of a photo album. To make it interesting the pages should all be different. To this purpose layers are a good means. I'd like to centre the layers on their page without doing so manually and without changig the distances between them. Using luacode one can calculate the distance d between the leftmost and the rightmost edge. Half the difference (\textwidth - d) is the amount to move the whole layer ensemble. My question is now: Does in context exist a possibility to move all layers jointly without correcting all their x-values subsequently? I append the pdf-file of my MWE. Rudolf ---------------------------------------------------------- MWE --------------------- \setuppapersize[A4,landscape] \setupexternalfigures[location={default}] \starttext \definelayer[LAY]% \setlayer[LAY][x=0pt,y=-8pt]% {% \vbox {% \hsize=.35\textwidth \externalfigure[cow][width=\hsize]% \vskip\lineheight \input tufte } } \setlayer[LAY][x=210pt,y=0pt]% {% \definedfont[Serif at 82pt] \rotate[rotation=90,frame=on,offset=2pt]{\hbox{JOURNEY}} } \setlayer[LAY][x=360pt,y=50pt]% {% \vbox {% \hsize=200pt \input ward \vskip\lineheight \externalfigure[hacker][height=.4\textheight]% } } \flushlayer[LAY] \page \definelayer[LAY]% \setlayer[LAY][x=0pt,y=0pt]% {\externalfigure[mill][height=.4\textheight]} \setlayer[LAY][x=150pt,y=0pt]% {\externalfigure[hacker][height=.4\textheight]} \setlayer[LAY][x=0pt,y=200pt]% {\externalfigure[cow][width=.5\textwidth]} \setlayer[LAY][x=\dimexpr.65\textwidth+40pt\relax,y=0pt]% {% \vbox {% \hsize=.2\textwidth \startalignment[flushleft] \input ward \vskip\lineheight \input ward \stopalignment } } \flushlayer[LAY] \stoptext ------------------------------------------------------------------------------------

2 2

\setupitemgroup[itemize],/setupitemize
by Willi Egger 19 Dec '19

19 Dec '19

Hello everybody, I just wanted to typeset a simple file with a adaptet itemization. Howewer none of the options have effect. Do I miss somehting or is itemize broken? MWE: % \setupitemize[packed][n,left={Step~},n] \setupitemgroup[itemize][1][packed][left={Step~},n] \starttext \startitem Start with this\dots \stopitem \startitem Proceed with that\dots \stopitem \startitem End with the following\dots \stopitem \stoptext Kind regards Willi

3 2

getting modules working on luametatex on Mac Catalina
by Charles Doherty 18 Dec '19

18 Dec '19

Thanks to Otared Kavian’s instructions I have luametatex working on my Mac OS 10.15.2 (Catalina). I have a file making use of the annotation module but it fails and the log says that it can’t be found (the texmf-modules folder is empty). What command do I need to download the modules? Thanks for any help, Charlie

1 0

Moving horizontally a whole ensemble of layers in the same run?
by Rudolf Bahr 18 Dec '19

18 Dec '19

Hi Hans, assume we fixed between "\definelayer" and "\flushlayer" a whole ensemble of layers on a page. And by calculating per luacode we determined the leftmost and the rightmost edge of the ensemble and would now like to horizontally centre the ensemble. We don't know the rightmost edge before we placed the last layer. By luacode we can calculate how much the centring movement should be, because we know "\textwidth", but we cannot save the calculated centring value in the context program for another run. Saving the luacode values of hundred of pages in flattened lua tables would be possible, but rather awkward; the problem of relating pages to tables would arise, especially when pages are taken out or additional pages are inserted. Do you know a way to settle the centring in the same context run in which the layers are placed? Could "\flushlayer" perform it somehow? Rudolf

2 1

Very strange behaviour of itemize, \quotation and \dots
by Otared Kavian 17 Dec '19

17 Dec '19

Hi Hans, Last week I sent you a PDF showing a strange behaviour of \startitemize and \quotation in LMTX. I finally could nail down the origin of the problem: it seems that if the command \setupsynctex[state=start] is present twice at the beginning of the document, then the combination \item and \quotation and \dots prevents the item to be shown correctly… (In my case I was typesetting a document with the above command in which a file containing it also was \input). Below is the minimal example and its PDF. Best regards: OK % begin file: bug-itemize-lmtx.tex \setupsynctex[stat=start] \setupsynctex[state=start] % if this is removed then everything is fine… \setupquotation[style=italic,left={«~},right={~»}] \showframe \starttext \startitemize[n] \dorecurse{4}{\item This item \quotation{is shown correcly\dots} \item This item \quotation{\dots is not shown correctly}} \stopitemize \stoptext % end file: bug-itemize-lmtx.tex

2 2

Re: [NTG-context] math align broken
by Jeong Dal 17 Dec '19

17 Dec '19

Dear Hans, I reinstall a new beta and test the previous file. (LuaMetaTeX: version 2.03.4, ConTeXt version: 2019.12.16 18:54, format: 2019.12.17) The problem is gone! The space in the aligned display math mode is normal. Thank you so much. Best regards, Dalyoung

1 0

Re: [NTG-context] math align broken
by Jeong Dal 17 Dec '19

17 Dec '19

Dear Hans, Here is a small example which shows a strange spacing in the aligned display math mode. The same code is OK in both inline mode and just display mode, but it is not good in aligned mode. I hope that it helps your fix . Thank you. Best regards, Dalyoung %%%%% running luametatex version 2.03.3, ConTeXt ver: 2019.12.12, format: 2019.12.14 %%%%% \starttext \startitemize \head inline formula: $1001 \times 23 \equiv 1 \quad \pmod {3837}$ \head display mode \startformula 1001 \times 23 \equiv 1 \quad \pmod {3837} \stopformula \head aligned display mode \startformula\startalign[m=2] \NC 2^7 \equiv \qquad \NC \pmod {341}, \NC 14^7 \equiv \qquad \NC \pmod {341}, \NR \NC 11^7 \equiv \qquad \NC \pmod {341}, \NC 3^7 \equiv \qquad \NC \pmod {341}, \NR \stopalign\stopformula \startformula\startalign[n=3] \NC 1001 \times 23 \NC \equiv 1 \quad \NC\pmod {3837} \NR \NC \qquad \times 23 \NC \equiv \qquad \NC\pmod {3837} \NR \stopalign\stopformula \stopitemize \stoptext

1 0

Thank you
by Kerry Sainsbury 17 Dec '19

17 Dec '19

ConTeXt is not causing me any problems. I just wanted to thank the developers for creating such a useful tool, and for providing such excellent support. I have just received copies of my 730 page hard cover book that chronicles part of my immediate family's life together, created by programmatically converting Libre Office documents to ConTeXt, and a bit of manual tweaking. It would never have been possible to produce such a book in such a short time without a tool like ConTeXt, and, unfortunately, time is short for me. Thank you again for making it possible to create such an important book for me and my family.

1 0

Re: [NTG-context] math align broken
by Jeong Dal 17 Dec '19

17 Dec '19

Dear Mikael, I also confirm your problem. I am using "ConTeXt ver: 2019.12.06 21:40 MKIV beta fmt: 2019.12.9 int: english/english” However, if you change “\Bigl(“ to “\left(“, then the space between left parenthesis and text become narrower. I hope that it will be fixed soon. Best regards, Dalyoung

3 2

"error not related to input file"
by Rudolf Bahr 17 Dec '19

17 Dec '19

Hello All, In: LuaMetaTeX, Version 2.03.3 ConTeXt ver: 2019.12.12 19:35 MKIV beta fmt: 2019.12.12 int: english/english I get the following error message: tex error > error not related to input file: tex error > tex: ! Emergency stop tex error > lua: ? tex error > mps: - Sorry, no MWE available. What does this message mean? [1] shows only an empty page. To this point my programm does all what it should with the exception of creating a grey pdf-file-page. My pdf-programs are okular and xpdf. In: LuaTeX, Version 1.11.2 (TeX Live 2020/dev) ConTeXt ver: 2019.12.12 19:23 MKIV beta fmt: 2019.12.13 int: english/english I get a "*" instead of the error message above. And again my program does all what it should, but a grey pdf-page too. Shure, there must be an error in my program. But where should I look for it? I tried several MWEs, but they all worked at their best. Please, any ideas? Best wishes, Rudolf [1] https://wiki.contextgarden.net/error_not_related_to_input_file

3 4

LMTXL Tagging and overlay
by Rik Kabel 17 Dec '19

17 Dec '19

Dear list, With the example below (perhaps not minimal, but I have stripped out as much as I could), the second page is set completely in the color of the overlay. This also happens when a layer is used instead of an overlay. When tagging is turned off, the colors are what they should be. When a few lines are removed from the first page, the colors are correct as well, but ... Attached is the resulting pdf. LMTX 20191206 only. MKIV 20191206 is fine. Error on my part, or bug? % \definelayer [WatermarkOverlay] % [repeat=yes, % width=\paperwidth, % height=\paperheight] % \setlayerframed [WatermarkOverlay] % [preset=center] % [foregroundcolor=red,frame=off] % {\scale[factor=max]{\rotate[rotation=60.0]{~Oops!~}}} \defineoverlay [WatermarkOverlay] [{\framed[frame=off, foregroundcolor=red] {\scale[factor=max] {\rotate[rotation=60.0] {~Oops!~}}}}] \setupbackgrounds [page] [background=WatermarkOverlay] %setuptagging [state=stop] \setuptagging [state=start] \setuplanguage [en] [spacing=packed] \setupinterlinespace [2.2ex] \definenarrower [MidOneEm] [middle=1em] \setuplayout [topspace=0.25in, footerdistance=0in, height=fit, width=27em, footer=0.5in, bottom=0.25in, backspace=1.1in] \definepapersize [octavo] [width=6in, height=9in] \setuppagenumbering [location=] \setuppapersize [octavo] \setupbodyfont [Termes,10pt] \starttext \starttitle [title={Naaaa aa aaa aaaa}] \startsubject [title={Baaaaaaaa}] Faaa aaa {\em Naa Yaaa Taaaa} aaaaaaaa aa Caaaa 22, 9990 (aaaa 999): \startnarrow [MidOneEm] {\bi Maaaaaaa Faaaaa, 86; Raaaa Laaa aaa Paaaaa Ta Baaaaa a Laaaaa} Da.~Faaaaa, a aaaaaaaa aa aaa Jaaaaa Iaaaaaaaa aa Raaaaaaa, aaaaaa aa aaaaa aaaa Taaaaa Iaaaaa aa Waaaaaaaaa Haaaaaa aaaa 1925 aa 1928. Ha aaa aaaa aaaaa aaaaaa aaaaa aa Caaaaaaaaaaa Taaaaa Raaaaa Saaaaa aaa aa Maaaa 1930 aaaaa aaa aaaaaaaaaaaa aaaa a aaa aaaaaa aa 83a Saaaaa aaa Caaaaaa Paaa Waaa. A aaaaa aaaaa, aa aaaaaaaa aaaa aaa aaaaaa aaaaaaaaa, aaaaaaa aaaa aa aaaaaa aa aaaaa aaa aaaaaaaaaa aa aaaaaa “aaaaaaa aaaaaaaaa aaaaaaaaaaaaa aaaaaaaaa.” “Paaaaaaaa aaaaaaaaa aaaaaa,” Raaaa Faaaaa aaaa aa aaa aaaaaa aa aaaaaaaaaaa, “aaa aaaaa aaaa aaaaaa aa aaaaaaaaaa, aa aaaaaaaaa, aa aaaaaaaaaaaaa, aa aaaaaaaaaa aaaaaaa aaaa aaa aaaa aaaaaa aa aaaaaaaa aaaaaa aaa aaaaaaaaaa, aaaa aaaaa aaaaaa aaaaaa aaaaaaaa aaa aaaaaaa aaaa. Taa aaaaa aaaaaaa aa aaaaaaa aaaaaaaa, aaaaaaaaaaa aaa aaaaaaaaaaa aaaaaaaaa aaaaa.” Eaaaaaa, aa aaa aaaaaaaaa Paaaaaaaaaa aa a “aaaaaaaa aaaaa” aaa aaa aaaaaaaaa aaa Saaaaaaaa Paaaa aaa aaa Paaaaaaaaaaa aaaaaaaaaaa aa Naaaaa Taaaaa. Aaaaaaa aaaaaa aaa aaaaaaaaaaaa aa aaa aaaaaaaa aaaaa. Aaaaa aaaaaaaaaa aaaa Caaaaaaa Uaaaaaaaaa Laa Saaaaa aa 1933, aa aaa aaa aaaaaa aaa aaa Aaaa-Naaa Laaaaa aaa aaaaaaa aaa Gaaaaa-Aaaaaaaa Baaa. Ha aaa aaaa aaaaaaa aa aaa Naa Yaaa Baaaa aa Raaaaa aaa aaaaaaaaaaa aa aaaaaaaaaaa aaa. Ha aaaaaa aaaaa aaaa aa aaa aaaaaa aaa aa Naa Yaaa Saaaa. \stopnarrow Faaaaa aaaa aaaaaa aa aaa aaaaaaaa aaa aaa aaaaaaaaaaaaa aa aaa Raaaaaaaaaaaaaaaa Raaaaaaaaa Caaaaaa. Aaaaaaaaa aa aaa Faaaaaaa 30, 1967 {\em Naa Yaaa Taaaa} aaaaaaaa (aaaa 38), aaa aaaa, Da.~Eaaaaa Oaaaaaa Faaaaa, aaa a aaaaaaaa aaaaaa aa {\em Taa Jaaaaaa aa Daaaaaa}. Saa aaa a aaaaaaaa aaa aaaaaaa aaaaaaaaa aaa aaaaaaaa aaaaaaaa aa aaaaaaaa aaaaaaaaaa aaa aaa Iaaaaaaaaa aa Raaaaaaa aaa Haaaaa aaaaaa aa aaaa aaaaaaaaaaaaa aaaa. Taa Faaaaa’a aaaaaa aaa, Faaaaaaa M.~Faaaaa (1894–1949) aaa a aaaaaaaaa aa aaaaaaaaa aa MIT. Taaaa aaaaaaa aaa, Waaaaa A.~Faaaaa (aaaaaaa aaaa I aaaaaaaa aaa aaaaaa’a aaaaaaaaaa aa aaaaaaaaa aaa aaaa) aaa aa aaa aaaaaaaa aaaaa aa aaa U.S.~Haaaaaaaa Maaaaaaa Maaaaa aaa aaaaaa aa Daaaaaaa aa Raaaaaaa aaa aaaa aaa Caaaaaaaaa aa Jaaaaa Maaaaaaa Caaaaa Aaaaaaa Gaaaaaa aaa aaa Waaaa Jaaaaa Raaaaaaaaaa Oaaaaaaaaaaa.% \startfootnote Taaaa aaa aa aaaa aaaaa aaaa I aaaa aa Da.~Faaaaa aa aaaaaaaaa aaaaaaaaa aa aaa aaaaaa’a aaaa. \stopfootnote \ Taaaa aaaaaaaa, Jaaaaa Faaaaa Haaaaaaaa, aaa a aaaaaa aaaaaa aaa aaaa aaaaaaaa aaaaa aa aaaaaa aaa aaaaaa aaaaaaaaaa. \stopsubject \startsubject [aaaaa={Eaaaaa}] Taa aaaaaaaaa aaaaa aaaaa aaaaa aa aaa aaaaaaaa aaa aaaaaaaa: Oaaaa aaaaa aaa aaaa aaaaaa a aaaaaa aa aa aaaaaaaaaaaaa. \stopsubject \stoptitle \stoptext -- Rik

2 3

GraphicsMagick corrupts TIFF upon PDF conversion
by Thangalin 16 Dec '19

16 Dec '19

FYI, there appears to be a bug with GraphicsMagick. gm convert -density 600x600 illustration.tif m_k_i_v_illustration.tif.pdf Produces: 38812848 Dec 15 22:51 m_k_i_v_illustration.tif.pdf https://i.imgur.com/EByrH6r.png Whereas ImageMagck: convert -density 600x600 illustration.tif m_k_i_v_illustration.tif.pdf Produces: 42343236 Dec 15 22:52 m_k_i_v_illustration.tif.pdf https://i.imgur.com/9DxRVW2.png Re: https://wiki.contextgarden.net/Using_Graphics#Image_Conversion Since GraphicsMagick is used by ConTeXt, is there a way to force ConTeXt to use ImageMagick instead? Thank you!

2 1

math align broken
by Mikael P. Sundqvist 16 Dec '19

16 Dec '19

Hi, I hope this report is not a duplicate of another one. I updated lmtx today (from http://lmtx.pragma-ade.nl/install-lmtx/context-linux-64.zip, a fresh install in the folder), and found some strange things with math: The file %%% EXAMPLE \starttext \startformula \startalign \NC \int e^{2x}\sin 3x\,dx\NC=\int\Im e^{(2+3i)x}\,dx\NR \NC\NC =\Im\int e^{(2+3i)x}\,dx\NR \NC\NC = \Im\Bigl(\frac{1}{2+3i}e^{(2+3i)}\Bigr)\NR \stopalign \stopformula >From this we see that $\lim_{n\to+\infty}f(n)=0$. \stoptext %%% gives the attached ex1.pdf. As we can see the spacing inside \startalign \stopalign is wrong. Also, the "lim" in the example after the displayed formula has disappeared. Any clues? /Mikael (I tried in any case to remove cache and rebuild, but since it was a fresh install, I could not see why it could help here. Thought I mention it anyways.)

2 1

Bug inline math in lmtx
by Otared Kavian 15 Dec '19

15 Dec '19

Hi Hans, It seems that the bug which was reported recently is again there: inline math does not show some symbols (lmtx version 2019.12.12 19:35). However mkiv version 2019.12.12 19:23 MKIV beta fmt: 2019.12.14 works fine. Here is a minimal example. \starttext Let $f(x) := \sum_{n \geq 1}2^{-n}x^n$. \stoptext Best regards: OK

2 1

Re: [NTG-context] lmtx
by Jeong Dal 14 Dec '19

14 Dec '19

Dear Otared, > I updated the wiki page for installing LuaMetaTeX on MacOS: > > https://wiki.contextgarden.net/installing_luametatex Thank you for the wiki. It explains the complicate processes well. As I wrote in the last mail, I don’t have a problem of installation as before. At this time, I don’t need to change SIP and the options of Gatekeeper in Mac OSX Catalina. Since I downloaded “install.sh”, it is inexecutable at the first time. But it worked well after allowing its running in the preference>security tab once. I don’t know why there is no problem at all as before. There may be some changes in the new beta. For test, I installed the new beta once more and confirmed that it is installed well and running well. However, your description is very useful when “install.sh” needs a permission of execution again and again. Thank you for your helpful advice again. Best regards, Dalyoung

1 0

Re: [NTG-context] lmtx
by Jeong Dal 13 Dec '19

13 Dec '19

Dear Hans, I downloaded the new beta today. It installs files and makes format file well. I compiled a test file without any problem. Of course, there is a security issue of OSX, but allowing the execution in the preference>security once, it doesn't ask about again. I also run a test file containing a new graphic feature of LMTX and I got a nice output. Thanks!!! Best regards, Dalyoung P.S. Here is a beginning part of log file. I installed new beta in the folder /Users/graph/ConTeXtC/ %%%%%%%%%%%%%%% resolvers | formats | executing runner 'run luametatex format': /Users/graph/ConTeXtC/tex/texmf-osx-64/bin/luametatex --jobname="test" --fmt=/Users/graph/ConTeXtC/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=/Users/graph/ConTeXtC/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui cont-yes.mkiv --c:autopdf --c:currentrun=1 --c:fulljobname="/Users/graph/ConTeXtC/test.tex" --c:input="/Users/graph/ConTeXtC/test.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:purgeall --c:texmfbinpath="/Users/graph/ConTeXtC/tex/texmf-osx-64/bin" This is LuaMetaTeX, Version 2.03.3 open source > level 1, order 1, name 'cont-yes.mkiv' system > system > ConTeXt ver: 2019.12.06 21:40 MKIV beta fmt: 2019.12.12 int: english/english system >

2 1

Formatting spaces for \placelistof ?
by Jon Wong 13 Dec '19

13 Dec '19

Space between the term (left column) and the definition (right column) is too small. \definesynonyms[term][terms][\deffull] \setupsynonyms[term][textstyle=cap] \placelistofterms

1 1

changing alignment inside a paragraph
by mf 13 Dec '19

13 Dec '19

Hello list, is there a way to achieve this? \def\FlushRightFromNextLine{\relax} \setupnarrower[left=0cm,right=11cm] \setupalign[stretch] \starttext This is what I'd like to type in my source:\par \blank \type{This is the text of an index term, that is normally justified, but I'd like the page numbers to be flushed to the right from their second line \FlushRightFromNextLine 34, 57, 101-104, 276, 345, 401-403.}\par \blank This is the normal result:\par \blank \startnarrower[right] This is the text of an index term, that is normally justified, but I'd like the page numbers to be flushed to the right from their second line \FlushRightFromNextLine 34, 57, 101-104, 276, 345, 401-403. \stopnarrower \blank This is the expected result:\par \blank \startnarrower[right] \parfillskip=0pt This is the text of an index term, that is normally justified, but I'd like the page numbers to be flushed to the right from their second line 34, 57,\par \penalty10000 % no page break in the middle of page numbers \startalignment[flushright] 101-104, 276, 345, 401-403.\par \stopalignment \stopnarrower \stoptext The expected result is to be intended visually, because there might be no need to break the text into two paragraphs. Thanks, Massi

2 5

lmtx
by Hans Hagen 13 Dec '19

13 Dec '19

Hi, The last few days there have been reports about garbled files in the lmtx installation so I did some test oinon a linux machine and indeed there was some issue (I'm not sure what causes it). Anyway, I made new zips so maybe one needs to reinstall (using the installer zip). It installs okay on wsl so probably also on other linuxes. This version (luametatex 2.03.3) has (again) a little smaller mem footprint as I still want it all to perforem ok on relative small devices or vm's and as side effect a bit smaller format file, not that that matters much (compared to general mem usage). There is not much to gain anyway, in terms of memory usage and performance so it's more an occasional challenge than a neccessity I guess. Anyway, hopefully nothing got broken. Peter Rolf and I are updating some of the pdf validation related stuff (additional formats), so that can be in flux. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

4 6

Using lmtx and new metafun
by Otared Kavian 12 Dec '19

12 Dec '19

Hi Aditya, Following your explanations in https://adityam.github.io/context-blog/post/new-metafun-interface/ I wrote an environment in order to display the graph of a function on a grid which can be adapted to each case. Assuming that I have an MPinstance named GridAxis (for example) which can dispaly a grid and axes, how can I call it and write a line such as draw function (1,"x","x*x/4 - 2.5",xmin,xmax,.001) scaled sx ; without changing the part whichh is included in \startMPdefinitions, in oder to draw the above function on that grid ? Thanks for your help: Otared PS: Here is my definition of GridAxis (I guess many parts of it could be better written…) \defineMPinstance[GridAxis] [ format=metafun, extensions=yes, initializations=yes, method=double, ] \startMPdefinitions{GridAxis} def GridAxisPlot = applyparameters "GridAxisPlot" "do_GridAxisPlot" enddef ; presetparameters "GridAxisPlot" [ xmin = -2.5, xmax = 2.5, ymin = -2.5, ymax = 2.5, dx = 1, dy = 1, sx = 5mm, sy = 5mm, scale = 0.5, grid = true, xaxisnumbers = true, yaxisnumbers = true, showmyorigin = true, style = "\switchtobodyfont[8pt]", ]; vardef do_GridAxisPlot = image ( pushparameters "GridAxisPlot"; newnumeric xmin, xmax, ymin, ymax; xmin := getparameter "xmin"; xmax := getparameter "xmax"; ymin := getparameter "ymin"; ymax := getparameter "ymax"; newnumeric sx, sy; sx := getparameter "sx"; sy := getparameter "sy"; newnumeric dx, dy; dx := getparameter "dx"; dy := getparameter "dy"; newpath xaxis, yaxis; xaxis := (xmin*sx, 0) -- (xmax*sx, 0) ; yaxis := (0, ymin*sy) -- (0, ymax*sy) ; newpath xtick, ytick; xtick := (-0.1sx, 0) -- (0.1sx, 0); ytick := (0, -0.1sy) -- (0, 0.1sy); newstring style; style := getparameter "style"; pickup pencircle scaled .1mm ; newboolean grid; grid := getparameter "grid"; newboolean xaxisnumbers ; xaxisnumbers := getparameter "xaxisnumbers" ; newboolean yaxisnumbers ; yaxisnumbers := getparameter "yaxisnumbers" ; for x = dx step dx until xmax : if grid : draw yaxis shifted (x*sx, 0) withcolor 0.75white ; fi draw ytick shifted (x*sx, 0); if xaxisnumbers : label.bot(style & decimal x, (x*sx, 0)); fi endfor newboolean showmyorigin ; showmyorigin := getparameter "showmyorigin" ; if showmyorigin : label.lrt(style & "0", origin) ; fi for x = -dx step -dx until xmin : if grid : draw yaxis shifted (x*sx, 0) withcolor 0.75white; fi draw ytick shifted (x*sx, 0); if xaxisnumbers : label.bot(style & decimal x, (x*sx, 0)); fi endfor for y = dy step dy until ymax : if grid : draw xaxis shifted (0, y*sy) withcolor 0.75white; fi draw xtick shifted (0, y*sy); if yaxisnumbers : label.lft(style & decimal y, (0, y*sy)); fi endfor for y = -dy step -dy until ymin : if grid : draw xaxis shifted (0, y*sy) withcolor 0.75white; fi draw xtick shifted (0, y*sy); if yaxisnumbers : label.lft(style & decimal y, (0, y*sy)); fi endfor drawarrow xaxis; drawarrow yaxis; label.rt( style & "$x$", (xmax*sx, 0)); label.top(style & "$y$", (0, ymax*sy)); newpair p ; newnumeric scale; scale := getparameter "scale" ; popparameters; ) enddef; \stopMPdefinitions

1 0

Re: [NTG-context] Problems with new beta
by Ursula Hermann 12 Dec '19

12 Dec '19

After new beta today Hans, it works fine. Uschi Von: Ursula Hermann Gesendet: Montag, 09. Dezember 2019 15:34 An: 'mailing list for ConTeXt users' <ntg-context(a)ntg.nl> Betreff: Problems with new beta Dear List! If I want to do the test from the new beta on WinEdt (I have Windows 10) , normaly the test works fine. But today as I wanted to make the test, it did not work. \starttext \startmode[mkiv] \startluacode tex.sprint("hello") \stopluacode \startMPcode draw textext("hello") rotated 45 ; \stopMPcode \framed{hello} \stopmode \startnotmode[mkiv] \startMPcode draw textext("hello") rotated -45 ; \stopMPcode \framed{hello} \stopnotmode \stoptext After Compiling with ConTeXt it does not work. I have the following mistake? Command Line: context.exe --synctex=-1 "context-test.tex" Startup Folder: C:\Users\Hermann\AppData\Local\Temp\Temp1_cont-tmf.zip\tex\context\test\mkiv mtxrun | forcing cache reload resolvers | resolving | configuration files already identified resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-context.lua' using hash 'lua::mtx-t-mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-contexts.lua' using hash 'lua::mtx-t-mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-t-mtx-context.lua' resolvers | resolving | remembered file 'mtx-context.lua' mtxrun | unknown script 'mtx-context.lua' or 'mtx-mtx-context.lua' There are no warnings, no errors, but it does not work. Why? _____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 0 Warnings: 0 Bad Boxes: 0 Many thanks Uschi

1 0

Ebooks with ConTeXt?
by Nicola 12 Dec '19

12 Dec '19

What is the current status of epub support in ConTeXt? I have never followed ConTeXt's development on the XML front too closely, but recently I have been asked to help format a text-only manuscript for publishing on platforms such as Kindle or Apple Books Store. Can ConTeXt be used (or perhaps even recommended) for that? Or would I have better luck with the proprietary tools (Kindle Create, iBooks Author)? Nicola

7 13

Bug: Segmentation fault
by Henri Menke 11 Dec '19

11 Dec '19

Dear devs, The example below crashes LuaTeX with a segmentation fault. It is reproducible with LuaTeX 1.10.1 7143 and LuaTeX 1.11.2 7226. To this end I built 7226 from source with --debugopt to get a backtrace, which can be found below as well. Cheers, Henri --- \directlua{token.set_macro(-1, "foo","\string\\,")} \show\foo \foo \bye --- (gdb) run Starting program: /usr/local/bin/luatex test.tex This is LuaTeX, Version 1.11.2 (TeX Live 2020/dev) restricted system commands enabled. (./test.tex Program received signal SIGSEGV, Segmentation fault. get_sa_item (head=0x41002, n=n@entry=92) at ../../../source/texk/web2c/luatexdir/utils/managed-sa.c:65 65 if (head->tree != NULL) { (gdb) bt full #0 get_sa_item (head=0x41002, n=n@entry=92) at ../../../source/texk/web2c/luatexdir/utils/managed-sa.c:65 No locals. #1 0x00000000005607d0 in get_cat_code (h=h@entry=-1, n=n@entry=92) at ../../../source/texk/web2c/luatexdir/tex/textcodes.c:68 sa_value = <optimized out> s = <optimized out> #2 0x00000000004d8a8c in set_macro (L=<optimized out>) at ../../../source/texk/web2c/luatexdir/lua/lnewtokenlib.c:1204 p = <optimized out> q = <optimized out> t = <optimized out> se = 0x295bf9a "" name = <optimized out> str = <optimized out> s = <optimized out> lname = 3 lstr = 2 cs = 743 cc = <optimized out> ct = -1 n = <optimized out> a = 0 nncs = <optimized out> #3 0x00000000006dc924 in luaD_precall (L=L@entry=0x1202678, func=func@entry=0x2214490, nresults=nresults@entry=0) at ../../../source/libs/lua53/lua53-src/src/ldo.c:434 n = <optimized out> f = 0x4d8890 <set_macro> ci = 0x123c830 #4 0x00000000006f62c2 in luaV_execute (L=L@entry=0x1202678) at ../../../source/libs/lua53/lua53-src/src/lvm.c:1134 b = <optimized out> nresults = 0 i = <optimized out> ra = 0x2214490 ci = 0x12221c0 cl = 0x2952f00 k = 0x294ea40 base = <optimized out> #5 0x00000000006dcef7 in luaD_call (nResults=<optimized out>, func=<optimized out>, L=0x1202678) at ../../../source/libs/lua53/lua53-src/src/ldo.c:499 No locals. #6 luaD_callnoyield (L=0x1202678, func=<optimized out>, nResults=<optimized out>) at ../../../source/libs/lua53/lua53-src/src/ldo.c:509 No locals. #7 0x00000000006db78c in luaD_rawrunprotected (L=0x1202678, f=0x6d0800 <f_call>, ud=0x7fffffffdf80) at ../../../source/libs/lua53/lua53-src/src/ldo.c:142 oldnCcalls = 0 lj = {previous = 0x0, b = {{__jmpbuf = {832, -3576387603206626035, 18884312, 1, 18884216, 0, 3576387604335174925, -3576387282536356595}, __mask_was_saved = 0, __saved_mask = {__val = {0, 18884312, 18884216, 7198250, 35733824, 72057594037927937, 140737488346976, 0, 0, 0, 0, 0, 0, 0, 0, 0}}}}, status = 0} #8 0x00000000006dd3af in luaD_pcall (L=L@entry=0x1202678, func=func@entry=0x6d0800 <f_call>, u=u@entry=0x7fffffffdf80, old_top=832, ef=<optimized out>) at ../../../source/libs/lua53/lua53-src/src/ldo.c:729 status = <optimized out> old_ci = 0x12026d8 old_allowhooks = 1 '\001' old_nny = 1 old_errfunc = 0 oldtop = <optimized out> #9 0x00000000006d3907 in lua_pcallk (L=0x1202678, nargs=nargs@entry=0, nresults=nresults@entry=0, errfunc=errfunc@entry=51, ctx=ctx@entry=0, k=k@entry=0x0) at ../../../source/libs/lua53/lua53-src/src/lapi.c:969 c = {func = 0x2214480, nresults = 0} status = <optimized out> func = <optimized out> #10 0x0000000000463b5f in luatokencall (p=p@entry=9030, nameptr=nameptr@entry=0) at ../../../source/texk/web2c/luatexdir/lua/luastuff.c:653 base = 51 ls = {s = 0x295e890 "\240܂\367\377\177", size = 0} i = 0 l = 32 s = 0x0 lua_id = <optimized out> stacktop = 50 #11 0x0000000000567a83 in conv_toks () at ../../../source/texk/web2c/luatexdir/tex/textoken.c:2859 old_setting = <optimized out> p = <optimized out> q = <optimized out> save_scanner_status = 0 save_def_ref = 0 save_warning_index = 0 bool = <optimized out> s = 9030 sn = 0 u = 0 c = <optimized out> str = <optimized out> i = 0 #12 0x0000000000503a25 in expand () at ../../../source/texk/web2c/luatexdir/tex/expand.c:259 t = <optimized out> p = <optimized out> ---Type <return> to continue, or q <return> to quit--- cur_ptr = <optimized out> cv_backup = 0 cvl_backup = 0 radix_backup = 0 co_backup = 0 backup_backup = 7961 save_scanner_status = <optimized out> #13 0x0000000000503f85 in get_x_token () at ../../../source/texk/web2c/luatexdir/tex/expand.c:501 No locals. #14 0x0000000000513ae5 in main_control () at ../../../source/texk/web2c/luatexdir/tex/maincontrol.c:1014 No locals. #15 0x000000000050f4ac in main_body () at ../../../source/texk/web2c/luatexdir/tex/mainbody.c:567 pdftex_map = "pdftex.map" bad = <optimized out> #16 0x0000000000446d2e in main (ac=<optimized out>, av=<optimized out>) at ../../../source/texk/web2c/luatexdir/luatex.c:609 No locals.

3 9

Blank page inserted when text reaches column's end
by Thangalin 11 Dec '19

11 Dec '19

When text reaches the end of a column, it appears to trigger inserting a blank page. In the following code, \dorecurse{3} causes a blank page to appear but \dorecurse{2} does not. The only difference is that when set to 3, the additional text is written on the last line of the last column. This scenario results in a blank page. Any ideas how the blank page can be suppressed? \showgrid \setuplayout[grid=yes] \starttext \startcolumnset[n=2] \input knuth \input lorem \input lorem \input knuth \dorecurse{3}{No TV and no beer make Homer something something.} \stopcolumnset \stoptext Version: $ context --version mtx-context | ConTeXt Process Management 1.03 mtx-context | mtx-context | main context file: /opt/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv mtx-context | current version: 2019.06.11 19:20 Thank you!

3 5

overbar in math mode is asymmetric over "F"
by Bernd Donner 11 Dec '19

11 Dec '19

Hello, the following small sample illustrates the problem: \starttext \enabletrackers[math.stackers.texts] \math{\overbar {ABC}} %<-- somewhat okay \math{\overbar {F}} %<-- too short on the right side %manual fixing \math{\overbar {ABC\mkern\onemuskip}} \math{\overbar {F\mkern3\onemuskip}} \stoptext I wish to have an overbar that extends over the exact boundingbox of the letter or sequence of letters. How can this be done in context without manual fixing? Thnk you, Bernd Donner

1 0

Problems with new beta
by Ursula Hermann 10 Dec '19

10 Dec '19

Dear List! If I want to do the test from the new beta on WinEdt (I have Windows 10) , normaly the test works fine. But today as I wanted to make the test, it did not work. \starttext \startmode[mkiv] \startluacode tex.sprint("hello") \stopluacode \startMPcode draw textext("hello") rotated 45 ; \stopMPcode \framed{hello} \stopmode \startnotmode[mkiv] \startMPcode draw textext("hello") rotated -45 ; \stopMPcode \framed{hello} \stopnotmode \stoptext After Compiling with ConTeXt it does not work. I have the following mistake? Command Line: context.exe --synctex=-1 "context-test.tex" Startup Folder: C:\Users\Hermann\AppData\Local\Temp\Temp1_cont-tmf.zip\tex\context\test\mkiv mtxrun | forcing cache reload resolvers | resolving | configuration files already identified resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-context.lua' using hash 'lua::mtx-t-mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-contexts.lua' using hash 'lua::mtx-t-mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-t-mtx-context.lua' resolvers | resolving | remembered file 'mtx-context.lua' mtxrun | unknown script 'mtx-context.lua' or 'mtx-mtx-context.lua' There are no warnings, no errors, but it does not work. Why? _____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 0 Warnings: 0 Bad Boxes: 0 Many thanks Uschi

2 2

Textbackground inside Layer?
by Jon Wong 10 Dec '19

10 Dec '19

\setupwhitespace[line] % A line's spacing between paragraphs. \starttext \definetextbackground[InfoText][ location=paragraph, frame=on] \definelayer[testlayer] \setlayer[testlayer][x=1cm,y=3cm]{% \startInfoText \stopInfoText } \flushlayer[testlayer] \stoptext Doesn’t work. Only works if I put text inside the layer.

2 1

Re: [NTG-context] problem with a new installation of LMTX: Solved!
by Otared Kavian 09 Dec '19

09 Dec '19

Dear Dalyoung, Thank you for the good news! Now I will add to the wiki the procedure I described, which you followed, but we have to find a way for people to get a zip file containing a complete tree of LuaMetaTeX which can be installed « by hand » under MacOS 10.15 Catalina. Maybe Hans or Mojca have a suggestion in this regard. Best regards: OK > On 9 Dec 2019, at 15:21, Jeong Dal <haksan(a)me.com> wrote: > > Dear Otared, > > I followed your instruction. During the process, “mtxrun —generate” and “context —make —all” work well. > > After rebooting the system, “context test.tex” produces a pdf output finally. Wow! > It is a long way around, but I learned many things. > > Thank you for your help. > > Best regards, > > Dalyoung

1 0

Eofill extension (Metafun)
by Fabrice Couvreur 09 Dec '19

09 Dec '19

Hello, Is it possible to use the eofill extension in this code ? I tried without success. Thank you. Fabrice \starttext \startMPcode path carre, disque; carre = fullsquare scaled 200; disque = fullcircle scaled 200; draw carre numberstriped (.25,15,5) withcolor \MPcolor{magenta}; fill disque withcolor white; draw carre withcolor \MPcolor{orange}; draw disque withcolor \MPcolor{orange}; path a[]; a1 = origin -- point 3.5 of carre; interim ahangle := 30; drawdblarrow a1 withpen pencircle scaled 1.5pt withcolor darkred; label.top("$R$", point 1/2 of a1); \stopMPcode \stoptext

2 2

Re: [NTG-context] problem with a new installation of LMTX
by Jeong Dal 09 Dec '19

09 Dec '19

Dear Otared, Thank you for the zip file. I downloaded it and copied it in a folder. (There is no context-cache folder in the zip file) In the terminal, I run “mtxrun —generate” and “context —make”. But system doesn’t allow the execution of “luametatex”. So I open the system preference:security part, and clear and allow the running “luametatex”. But the system hinders “luametatex” continuously. I have to ask about it to MAC service first to resolve this problem. If it is not working after the resolve security problem, I may go back to previous version of OSX. I’ll let you know the progress. Thank you again. Best regards, Dalyoung > 2019. 12. 9. 오전 6:34, Otared Kavian <otared(a)gmail.com> 작성: > > Dear Dalyoung, > > I made a zip file of the context-osx-64 tree on my machine, and put it on Dropbox > https://www.dropbox.com/s/6isogxi78fwp1se/context-osx-64.zip?dl=0 > for you: you can try to install it on your Mac running MacOS 10.15 Catalina. Could you please tell me if you succeed to implement the procedure I described in the other email? > > Best regards: OK > >> On 8 Dec 2019, at 13:31, Jeong Dal <haksan(a)me.com> wrote: >> >> For test, I installed again after removing ConTeXtLMTX folder. >> But it is same as before. >> >> I looked files in “/tex/texmf-osx-64/bin”. >> There are 5 files: context, context.lua, luametatex, mtxrun, mtxrun.lua. >> context and mtxrun are symbolic linked to luametatex. >> But luametatex is not executable, so I changed it using “chmod 755 luametatex”. >> I run “mtxrun —generate”, then it set variables as follows: >> >> % mtxrun --generate >> resolvers | resolving | variable 'SELFAUTOLOC' set to '/usr/local/texlive/2019/bin/x86_64-darwin' >> resolvers | resolving | variable 'SELFAUTODIR' set to '/usr/local/texlive/2019/bin' >> resolvers | resolving | variable 'SELFAUTOPARENT' set to '/usr/local/texlive/2019' >> resolvers | resolving | variable 'TEXMFCNF' set to '' >> resolvers | resolving | variable 'TEXMF' set to '' >> resolvers | resolving | variable 'TEXOS' set to 'bin' >> resolvers | resolving | >> ……. >> >> and do many things in the texlive/2019 folders. >> >> My question is that luametatex is distributed as an inexecutable form deliberately? >> >> Thank you for reading. >> >> Best regards, >> >> Dalyoung >> >> >> >> >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to the Wiki! >> >> maillist : ntg-context(a)ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://context.aanhet.net >> archive : https://bitbucket.org/phg/context-mirror/commits/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ >

1 0

problem with a new installation of LMTX
by Jeong Dal 09 Dec '19

09 Dec '19

I read some reports about the problems of a new installation of LMTX. Today, I did fresh install and also have a problem in compilation. I did the following: 0. Open the terminal 1. Remove all files in the folder “ConTeXtLMTX” 2. Download install files from PRAGMA ADE. 3. run “install.sh”(at first, it won’t run because of the MacOS Catalina. I have to allow the running in the preference.) 4. it installs the folder “tex” and some files but context-cache is empty. And, it couldn’t compile test.tex I copied the log during the installation for checking. Thank you. Best regards, Dalyoung %%%%%%%% ConTeXtLMTX % sh ./install.sh mtxrun | forcing cache reload resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/Users/graph/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/Users/graph/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/Users/graph/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated mtx-install | server : lmtx.pragma-ade.com mtx-install | instance : install-lmtx mtx-install | platform : osx-64 mtx-install | system : unix mtx-install | fetching 'http://lmtx.pragma-ade.com/install-lmtx//texmf.zip' mtx-install | unzipping 'texmf.zip' 159 files of 1598 done, 3290479 bytes, 0.043 seconds 318 files of 1598 done, 21710364 bytes, 0.158 seconds 477 files of 1598 done, 38859916 bytes, 0.251 seconds 636 files of 1598 done, 39457728 bytes, 0.275 seconds 795 files of 1598 done, 39931784 bytes, 0.298 seconds 954 files of 1598 done, 40812872 bytes, 0.323 seconds 1113 files of 1598 done, 48279500 bytes, 0.371 seconds 1272 files of 1598 done, 72162122 bytes, 0.515 seconds 1431 files of 1598 done, 82495084 bytes, 0.605 seconds 1590 files of 1598 done, 83618619 bytes, 0.629 seconds 1598 files of 1598 done, 83681430 bytes, 0.631 seconds mtx-install | fetching 'http://lmtx.pragma-ade.com/install-lmtx//texmf-context.zip' mtx-install | unzipping 'texmf-context.zip' 26 files of 265 done, 4130838 bytes, 0.020 seconds 52 files of 265 done, 4639798 bytes, 0.026 seconds 78 files of 265 done, 5091021 bytes, 0.032 seconds 104 files of 265 done, 5652061 bytes, 0.039 seconds 130 files of 265 done, 5930475 bytes, 0.045 seconds 156 files of 265 done, 5948715 bytes, 0.049 seconds 182 files of 265 done, 6166185 bytes, 0.054 seconds 208 files of 265 done, 6380942 bytes, 0.059 seconds 234 files of 265 done, 9347747 bytes, 0.074 seconds 260 files of 265 done, 32131852 bytes, 0.164 seconds 265 files of 265 done, 55758323 bytes, 0.281 seconds mtx-install | installing tex/texmf-osx-64, 5 files mtx-install | skipping tex/texmf-osx-64/bin/context mtx-install | new : 31 % : 1315 : tex/texmf-osx-64/bin/context.lua mtx-install | new : 62 % : 2805872 : tex/texmf-osx-64/bin/luametatex mtx-install | skipping tex/texmf-osx-64/bin/mtxrun mtx-install | new : 100 % : 696620 : tex/texmf-osx-64/bin/mtxrun.lua mtx-install | current : %S mtx-install | target : true mtx-install | removing : mtxrun mtx-install | removing : context mtx-install | linked : mtxrun mtx-install | linked : context mtx-install | xbit set : /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/luametatex mtx-install | xbit set : /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/mtxrun mtx-install | xbit set : /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/context mtx-install | running: /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/mtxrun --generate resolvers | resolving | variable 'SELFAUTOLOC' set to '/Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin' resolvers | resolving | variable 'SELFAUTODIR' set to '/Users/graph/ConTeXtLMTX/tex/texmf-osx-64' resolvers | resolving | variable 'SELFAUTOPARENT' set to '/Users/graph/ConTeXtLMTX/tex' resolvers | resolving | variable 'TEXMFCNF' set to '' resolvers | resolving | variable 'TEXMF' set to '' resolvers | resolving | variable 'TEXOS' set to 'ConTeXtLMTX' resolvers | resolving | resolvers | resolving | using configuration specification 'home:texmf/web2c;selfautoparent:/texmf-local/web2c;selfautoparent:/texmf-context/web2c;selfautoparent:/texmf-dist/web2c;selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | found regular configuration file '/Users/graph/ConTeXtLMTX/tex/texmf/web2c/texmfcnf.lua' resolvers | resolving | resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | mtxrun | elapsed lua time: 0.018 seconds mtx-install | running: /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/mtxrun --script cache --erase mtxrun | forcing cache reload resolvers | resolving | configuration files already identified resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-cache.lua' using hash 'lua::mtx-cache.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-caches.lua' using hash 'lua::mtx-caches.lua' resolvers | resolving | remembered file 'mtx-cache.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-cache.lua' using hash 'lua::mtx-t-cache.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-caches.lua' using hash 'lua::mtx-t-caches.lua' resolvers | resolving | remembered file 'mtx-t-cache.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'cache.lua' using hash 'lua::cache.lua' mtxrun | unknown script 'cache.lua' or 'mtx-cache.lua' mtx-install | running: /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/mtxrun --generate resolvers | resolving | variable 'SELFAUTOLOC' set to '/Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin' resolvers | resolving | variable 'SELFAUTODIR' set to '/Users/graph/ConTeXtLMTX/tex/texmf-osx-64' resolvers | resolving | variable 'SELFAUTOPARENT' set to '/Users/graph/ConTeXtLMTX/tex' resolvers | resolving | variable 'TEXMFCNF' set to '' resolvers | resolving | variable 'TEXMF' set to '' resolvers | resolving | variable 'TEXOS' set to 'ConTeXtLMTX' resolvers | resolving | resolvers | resolving | using configuration specification 'home:texmf/web2c;selfautoparent:/texmf-local/web2c;selfautoparent:/texmf-context/web2c;selfautoparent:/texmf-dist/web2c;selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/Users/graph/ConTeXtLMTX/tex/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | found regular configuration file '/Users/graph/ConTeXtLMTX/tex/texmf/web2c/texmfcnf.lua' resolvers | resolving | resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | mtxrun | elapsed lua time: 0.018 seconds mtx-install | running: /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/context --make en mtxrun | forcing cache reload resolvers | resolving | configuration files already identified resolvers | resolving | skipping configuration file 'selfautoparent:/texmf/web2c/texmfcnf.lua' (no valid format) resolvers | resolving | no texmf paths are defined (using TEXMF) resolvers | resolving | mtxrun | the resolver databases are not present or outdated resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-context.lua' using hash 'lua::mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-contexts.lua' using hash 'lua::mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-context.lua' using hash 'lua::mtx-t-mtx-context.lua' resolvers | resolving | using suffix based filetype 'lua' resolvers | resolving | remembering file 'mtx-t-mtx-contexts.lua' using hash 'lua::mtx-t-mtx-contexts.lua' resolvers | resolving | remembered file 'mtx-t-mtx-context.lua' resolvers | resolving | remembered file 'mtx-context.lua' mtxrun | unknown script 'mtx-context.lua' or 'mtx-mtx-context.lua' mtx-install | mtx-install | tex/texmf : 0 files with 0 bytes installed mtx-install | tex/texmf-context : 0 files with 0 bytes installed mtx-install | tex/texmf-osx-64 : 5 files with 9115551 bytes installed mtx-install | mtx-install | ConTeXt LMTX with LuaMetaTeX is still experimental and when you get a crash this mtx-install | can be due to a mismatch between Lua bytecode and the engine. In that case you can mtx-install | try the following: mtx-install | mtx-install | - wipe the texmf-cache directory mtx-install | - run: mtxrun --generate mtx-install | - run: context --make mtx-install | mtx-install | When that doesn't solve the problem, ask on the mailing list (ntg-context(a)ntg.nl) mtx-install | mtx-install | update, done cp: /Users/graph/ConTeXtLMTX/tex/texmf-context/scripts/context/lua/mtxrun.lua: No such file or directory cp: /Users/graph/ConTeXtLMTX/tex/texmf-context/scripts/context/lua/mtx-install.lua: No such file or directory If you want to run ConTeXt everywhere, you need to adapt the path, like: /Users/graph/ConTeXtLMTX/bin:/Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/Library/TeX/texbin:/opt/X11/bin If you run from an editor you can specify the full path to mtxrun: /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/mtxrun --autogenerate --script context --autopdf ... The following settings were used: server : lmtx.contextgarden.net,lmtx.pragma-ade.com,lmtx.pragma-ade.nl instance : install-lmtx extras : ownpath : /Users/graph/ConTeXtLMTX platform : osx-64 %%%%%%

6 11

Re: [NTG-context] problem with a new installation of LMTX
by Jeong Dal 09 Dec '19

09 Dec '19

Dear Hans and Otared, Thank you again for your attempt to find a solution. Catalina(MacOS 10.15.1) prohibits an unauthorized program run. So I have to allow the execution of “mtxrun” manually in the preference. Since "mtxrun —generate” ends with the message “unknown script mtxrun-context.lua or mtx-mtxrun-context.lua”, I tried to locate it in the finder. There is one in a folder installed by MacTeX(TeXLive), but not in “ConTeXtLMTX”. As you said, many files are not copied during the installation. I’ll try to understand what is going on, but it would be very hard to find a solution by myself. I have to use old ConTeXt for a while. Thank you again. Best regards, Dalyoung

5 5

Re: [NTG-context] problem with a new installation of LMTX
by Richard Mahoney | Indica et Buddhica 09 Dec '19

09 Dec '19

Hello Hans, Yes, the Linux install fails as well. I have just tried another. The output of context --make is attached. During the install the ascii *.lua files in the following directory -- initially from context-linux-64.zip-- are overwritten by what look like binaries: /path/to/lmtx/bin: total used in directory 3444 available 236814588 drwx------ 2 rbm49 rbm49 4096 Mar 2 2019 . drwx------ 4 rbm49 rbm49 4096 Dec 9 06:59 .. -rw------- 1 rbm49 rbm49 16432 Dec 9 06:59 mtx-install.lua -rwx------ 1 rbm49 rbm49 2786296 Dec 9 06:59 mtxrun -rw------- 1 rbm49 rbm49 696620 Dec 9 06:59 mtxrun.lua And at the end of the install the following two files also seem to be binaries (see "no valid format" message in attached log): /path/to/lmtx/tex/texmf/web2c: total used in directory 28 available 236977668 drwx------ 2 rbm49 rbm49 4096 Dec 9 06:58 . drwx------ 6 rbm49 rbm49 4096 Dec 9 06:58 .. -rw------- 1 rbm49 rbm49 7500 Dec 9 06:58 texmf.cnf -rw------- 1 rbm49 rbm49 8214 Dec 9 06:58 texmfcnf.lua Best, Richard -- Richard Mahoney | Indica et Buddhica Littledene Bay Road Oxford NZ T: +6433121699 M: +64210640216 r.mahoney(a)indica-et-buddhica.org https://indica-et-buddhica.org/ -----Original Message----- From: Hans Hagen <j.hagen(a)xs4all.nl> To: Richard Mahoney | Indica et Buddhica < r.mahoney(a)indica-et-buddhica.org> Subject: Re: [NTG-context] problem with a new installation of LMTX Date: Sun, 8 Dec 2019 12:30:32 +0100 Mailer: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:68.0) Gecko/20100101 Thunderbird/68.3.0 On 12/8/2019 8:36 AM, Richard Mahoney | Indica et Buddhica wrote: > Hello Otared, > > "... get overwritten and are modified for some unknown reasons: in > particular the two lua files become complete garbage…" > > I found the same today under Gentoo Linux, and the same for the lua > files under (can't check which as I've deleted the install): > > ~/lmtx/tex/texmf-linux-64/bin so linux install fails too? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Re: [NTG-context] problem with a new installation of LMTX
by Jeong Dal 08 Dec '19

08 Dec '19

For test, I installed again after removing ConTeXtLMTX folder. But it is same as before. I looked files in “/tex/texmf-osx-64/bin”. There are 5 files: context, context.lua, luametatex, mtxrun, mtxrun.lua. context and mtxrun are symbolic linked to luametatex. But luametatex is not executable, so I changed it using “chmod 755 luametatex”. I run “mtxrun —generate”, then it set variables as follows: % mtxrun --generate resolvers | resolving | variable 'SELFAUTOLOC' set to '/usr/local/texlive/2019/bin/x86_64-darwin' resolvers | resolving | variable 'SELFAUTODIR' set to '/usr/local/texlive/2019/bin' resolvers | resolving | variable 'SELFAUTOPARENT' set to '/usr/local/texlive/2019' resolvers | resolving | variable 'TEXMFCNF' set to '' resolvers | resolving | variable 'TEXMF' set to '' resolvers | resolving | variable 'TEXOS' set to 'bin' resolvers | resolving | ……. and do many things in the texlive/2019 folders. My question is that luametatex is distributed as an inexecutable form deliberately? Thank you for reading. Best regards, Dalyoung

1 0

Noto Emoji fonts
by Pablo Rodriguez 08 Dec '19

08 Dec '19

Hi Hans, which is the way I can get the glyphs from the second line in the following sample? \definefontfamily[emoj][rm][Noto Emoji] \setupbodyfont[emoj] \starttext 🔔💻🔨🔩 󾓧󾓨󾓩󾓪󾓫󾓬󾓭󾓮 \stoptext Would it be possible that Noto Color Emoji font works with ConTeXt? I think this is handy, since they are useful in presentations. In fact, I need one flag (in the second line form the sample) for one presentation. Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

issue with beta from 2019.11.29 21:47 in Windows
by Pablo Rodriguez 08 Dec '19

08 Dec '19

Dear list, I have the following sample: \def\ThisOption{ab} \def\ThatOption{ábc} \starttext \executesystemcommand{contextjit --purgeall --arguments="OptionThis={\ThisOption},OptionThat={\ThatOption}" second.tex} \contextversion \stoptext The contents of second.tex read: \starttext \enablemode[\env{OptionThis}] \enablemode[\env{OptionThat}] This: \doifmodeelse{ab}{enabled}{disabled}.\par That: \doifmodeelse{ábc}{enabled}{disabled}. \stoptext I use --arguments to pass modes to documents compiled via \executesystemcommand. Everything worked fine. This morning I updated ConTeXt at work (with Win7) and modes with non-ASCII chars aren’t recognized. Could anyone confirm the issue I’m describing in Windows? Is there any ConTeXt command (or Lua function) that translates non-ASCII chars to their ASCII values? Many thanks for your help, Pablo -- http://www.ousia.tk

4 17

hz / expansion
by Hans Hagen 08 Dec '19

08 Dec '19

Hi, The latest lmtx has a new feature: expansion control independent of font specific settings. When used the font specific step stretch and shrink will be overloaded. This permits mixed setups that are normally nor possible because these three properties need to be consistent within a paragraph. It also permits local deviations from the defaults, for instance in more extreme cases. \startluacode local classes = fonts.expansions.classes classes.qualityb = { vector = "default", factor = 1, stretch = 8, shrink = 4, step = .5, } classes.qualitya = { vector = "default", factor = 1, stretch = 4, shrink = 2, step = .5, } \stopluacode \showframe % \enabletrackers[*expansion] \setupbodyfont[dejavu,8pt] \defineexpansion [myexpansion] [step=1, stretch=50, shrink=20] \definefontfeature [basea] [default] [expansion=qualitya] \definefontfeature [baseb] [default] [expansion=qualityb] \definefont[FontA][Serif*basea] \definefont[FontB][Serif*baseb] \setupalign[verytolerant,stretch,hz] \starttext \startbuffer \dorecurse {30} {% {\FontB \red test me #1,} \FontA \dorecurse{#1}{test ##1, }% }\par \stopbuffer {\getbuffer \page} \setexpansion[myexpansion] {\getbuffer \page} \stoptext Maybe it's useful (I hardly use expansion myself). Hopefully there are no side effects. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 2

Filling a page with \thinrules
by Otared Kavian 07 Dec '19

07 Dec '19

Hi all, I am preparing a test for my students where I would like to have the statement of the problem on the top of a page and the remainder to the bottom of that page filled with \thinrules, for them to write the solution. And sometimes there might be an empty page filled with thinrules when the solution to the exercise is longer. The following minimal example gives the idea of what I want to achieve, but since the statement of each exercise may be longer or shorter, I would like ConTeXt to compute how many \thinrules can be put in the remainder of the page. That is, can one imagine a macro named (say) \fillpagewiththinrules which puts the exact number of thinrules before ejecting the page? Is this possible or have I to do it by hand for each page? \showframe \starttext \dorecurse{2}{\input knuth.tex\par} \thinrules[n=20] % On the first page I can put 20 thinrules \page \thinrules[n=40] % On an empty page I can put 40 thinrules \page \input ward.tex \thinrules[n=37] % On the third page there can be 37 thinrules \stoptext Thanks for any hint and help, Best regards: Otared K.

4 5

PDF/A-3a attachment support query
by Rik Kabel 07 Dec '19

07 Dec '19

Hello list, The following document fails PDF/A-3a validation. It passes without the attachment. \setuplanguage [en] \setuptagging [state=start] \setupinteraction [state=start] \setupbackend [format={pdf/a-3a},profile={default_gray.icc}, intent={ISO coated v2 300\letterpercent\space (ECI)}] \setupstructure [state=start,method=auto] \setupcolors [pagecolormodel=auto,start=yes,rgb=no,cmyk=no] \setupbodyfont [Palatino,10pt] \starttext Attaching a plain text file. % \attachment [file=test.tex, % type={text/plain;charset=UTF-8}] % The \ConTeXt\ source code for this document is attached here. \attachment [file=testa.pdf, type={application/pdf}] A successfully validated pdf/a-3a file is attached here. \stoptext pdf-online <https://www.pdf-online.com/osa/validate.aspx>reports: Validating file "test.pdf" for conformance level pdfa-3a The key F is required but missing. The appearance dictionary doesn't contain an entry. File specification 'testa.pdf' not associated with an object. The document does not conform to the requested standard. The document doesn't conform to the PDF reference (missing required entries, wrong value types, etc.). The document contains hidden, invisible, non-viewable or non-printable annotations. The document contains annotations or form fields with ambigous or without appropriate appearances. The document does not conform to the PDF/A-3a standard. Done. My understanding is that 3-a should support both pdf and non-pdf attachments. This fails in a similar manner with both pdf/a-3a-validated files and with plain text files. I also tested with verapdf, and it also rejected the document with an attachment. Is this my error, or is it not yet supported? -- Rik Kabel

5 6

wrong link /Rect in LMTX
by Pablo Rodriguez 07 Dec '19

07 Dec '19

Hans, \setupinteraction [state=start] \enabledirectives[references.border=red] \starttext \startxtable[option=stretch, frame=off] \startxrow \startxcell\goto{\hyphenatedurl{a}}[url(a)]\\ b\stopxcell \stopxrow \stopxtable \stoptext When compiled with LMTX, the link has a /Rect as wide as the cell. MkIV generates the link with the right width. Could you fix it? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

new beta
by Hans Hagen 07 Dec '19

07 Dec '19

Hi, I uploaded a new lmtx beta. Hopefully the installer works ok as I redid some of the "zip" related code (simpler, smaller binary too). FWIW, the luametatex codebase is now pretty close to okay, but of course there can be bugs, but nothing thay can't be solved fast. Given some earlier discussions on the list, I wonder about running context in containers and (behind the screens) web applications. Is there anything needed, mostly in the support scripts I guess, that can make that more comfortable / efficient / etc? Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

4 8

getting character from Noto Emoji
by Pablo Rodriguez 07 Dec '19

07 Dec '19

Dear list, with this sample (font available at https://www.google.com/get/noto/) \definefontfamily[emoj][rm][Noto Emoji] \setupbodyfont[emoj] \starttext 🔔💻🔨🔩 󾓥󾓦󾓧󾓨󾓩󾓪󾓫󾓬󾓭󾓮 \stoptext I would like to get the second line of emojis (which are flags). \tochar{n:FE4EB} outputs "4" and \utfchar{0xFE4EB}. What am I doing wrong here? BTW, I would love to use Noto Color Emoji, but ConTeXt (MkIV & LMTX) doesn’t seem to handle it. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

Suppress blank page in asymmetrical multicolumn layout
by Thangalin 07 Dec '19

07 Dec '19

Hi there, How do I suppress the blank page in the following document while maintaining the asymmetrical multicolumn layout? The problem centres around "page=yes," whereby removing it eliminates the blank page, but then wreaks havoc on the document layout. \definepapersize[BookPaperSize][width=24in, height=12in,] \setuppapersize[BookPaperSize] \definelayout[BookTextLayout][ topspace=.5in, backspace=.5in, header=\zeropoint, footer=\zeropoint, grid=yes, ] \setuplayout[BookTextLayout] \definecolumnset[BookColumns][n=4,distance=.25in] \setupcolumnset[BookColumns:1][width=11.75in] \setupcolumnset[BookColumns:2][width=3.46in] \setupcolumnset[BookColumns:3][width=3.46in] \setupcolumnset[BookColumns:4][width=3.46in] \setuphead[section][ page=yes, beforesection={\startcolumnset[BookColumns]}, aftersection={\stopcolumnset}, ] \setuphead[subsection][ after={\column}, ] \setuphead[subsubsection][ after={\blank[small]}, ] \starttext \startsection[title={Section Title}] \startsubsection[title={Subtitle}] \dorecurse{2}{\input knuth} \dorecurse{2}{% \startsubsubsection[title={Subsubtitle}] \dorecurse{1}{\input ward} \dorecurse{2}{\input lorem} \dorecurse{1}{\input bryson} \stopsubsubsection } \stopsubsection \stopsection \stoptext Thank you!

2 1

Using ConTeXt with LuaTeX variants
by Jairo A. del Rio 06 Dec '19

06 Dec '19

I want to know if it's possible use HarfTeX/LuaHBTeX with ConTeXt (MKIV), mainly for what can be done with them (the "mode=harf" feature and Lua language features). Although this is pretty easy with LaTeX: \usepackage{harfload} \setmainfont{font}[RawFeature={mode=harf}] I have no idea of how to make it work with context. I've tried the following with a test file (a simple \starttext .. \stoptext document): context tests.tex --engine=luahbtex And this happens: mtx-context | run 1: luahbtex --fmt="/home/coragyps/.texlive2019/texmf-var/luatex-cache/context/a86c089b384a3076dc514ba966a1fac9/formats/luatex/cont-en" --jobname="tests" --lua="/home/coragyps/.texlive2019/texmf-var/luatex-cache/context/a86c089b384a3076dc514ba966a1fac9/formats/luatex/cont-en.lui" --c:currentrun=1 --c:engine="luahbtex" --c:fulljobname="./tests.tex" --c:input="./tests.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:texmfbinpath="/usr/local/texlive/2019/bin/x86_64-linux" "cont-yes.mkiv" This is LuaHBTeX, Version 1.11.2 (TeX Live 2020/dev) system commands enabled. (Fatal format file error; I'm stymied)mtx-context | fatal error: return code: 256 What should I do? Thank you in advance

3 2

Impacts Project
by Thangalin 06 Dec '19

06 Dec '19

Hi list! Thank you for helping to answer so many questions and remove so many roadblocks with my project. The result is a photobook written in Markdown, piped through pandoc to generate ConTeXt code, then stylized using a series of .tex files. The coolest ConTeX part, IMO, is the orange dot in the timeline. Using MetaPost, the date for the timeline is read directly from the document, then plotted relative to the \overlaywidth. Changing the date in the Markdown document winds up repositioning the timeline dot automagically. https://impacts.to/ The book is going to be released under a CC BY 4.0 license, including all the source code necessary to generate the book. Meanwhile, if anyone is interested in nabbing a copy of the PDF, let me know (preferably via the web form). Again, my sincerest gratitude, this project would have been a much more time-consuming and arduous journey without your generous help.

1 0

Using ConTeXt with LuaTeX variants
by Jairo A. del Rio 05 Dec '19

05 Dec '19

Hi. How do I build the format? I try context --make ANd nothing special happens. How do I set up the new engine. Thank you in advance.

1 0

LMTX install issue
by Otared Kavian 05 Dec '19

05 Dec '19

Hi all, I cannot update to the latest lmtx, using the install.sh downloaded from http://www.pragma-ade.com/install.htm more precisely the version for MacOS from http://lmtx.pragma-ade.nl/install-lmtx/context-osx-64.zip I keep getting the version from 2019.11.29 21:58. What is going on? Best regards and thanks in advance: Otared K.

2 1

Bug: \adjustspacing=1 does not disable expansion
by Henri Menke 05 Dec '19

05 Dec '19

Dear devs, The \adjustspacing register is described in the LuaTeX manual as follows: When \adjustspacing has value 2, hz optimization will be applied to glyphs and kerns. When the value is 3, only glyphs will be treated. A value smaller than 2 disables this feature. However, setting \adjustspacing=1 will only disable shrink but not stretch. Please find a minimal example example, where I have used exaggerated values for shrink and stretch to emphasize the issue. It can be reproduced with both mtxrun --script plain and luatex with luaotfload.sty. I have already checked linebreak.c but add_to_widths looks innocuous and properly checks the adjust_spacing parameter. Cheers, Henri --- %\input luaotfload.sty \directlua{ fonts.expansions.setups.default.stretch = 2000 fonts.expansions.setups.default.shrink = 2000 } \adjustspacing=1 \font\1="file:lmroman10-regular.otf:expansion=default" \hsize=5em \1 \input lorem \bye

2 3

Place externalfigure anywhere on page
by Jon Wong 05 Dec '19

05 Dec '19

A real float. Is that possible?

2 1

Indenting number in TOC, particular numbering scheme, and other questions
by Daniel Haid 05 Dec '19

05 Dec '19

Hello everyone, I just started to experiment with ConTeXt. I have a few issues with my first document structure. I need a very particular numbering scheme, which I have tried to implement. I have appended the document below. 1. Why is there no indenting in the TOC starting with (what I call) level 7? This could have to something with the fact that the levels starting from 7 are defined in the subsub module? 2. Why are the numbers in the headings inside the main text not printed for levels 8 and 9? Interestingly, they *are* printed for level 7, which is defined in the subsub module. I have looked into m-subsub.mkiv and saw no difference at all between the different levels defined there. 3. Is it possible to indent not only the section name but also the number in the TOC? Moreover, I would like to have a dot after the first three levels, but not the other ones (in the TOC and in the text), like this: A. First Level .................. 1 I. Second Level ............. 2 1. Third Level .......... 3 a) Fourth Level ..... 4 ... 4. I use the conversions A, I, 1 (without dot), and then defined my own ones "a)", "aa)", etc. *with* the ")". I think this is correct, since the way a section has to be referenced in the text is like this (for example): B.IV.5.c).aa).(4) Is there a way to get this? Moreover, is it possible to have a relative referencing command, for example, if section B.IV.5.d) is quoted from inside section B.IV.6.f) the command should only print 5.d) since the B.IV is implied. 5. How can I get rid of the additional vertical space before the second entry "B. Another first level" (chapter)? 6. I wanted to define aliases for the \subsub...subsection commands, since they are difficult to read, and I used \def as you can see below. Is this the right way to do it or would you recommend something else? Any help would be greatly appreciated. D. ---------- \usemodule[subsub] \usetypescript[termes] \setupbodyfont[termes,12pt] \def\arconv#1{\alphabeticnumerals{#1})} \defineconversion[ar][\arconv] \def\aarconv#1{\alphabeticnumerals{#1}\alphabeticnumerals{#1})} \defineconversion[aar][\aarconv] \def\lnrconv#1{(\numbers{#1})} \defineconversion[lnr][\lnrconv] \def\larconv#1{(\alphabeticnumerals{#1})} \defineconversion[lar][\larconv] \def\laarconv#1{(\alphabeticnumerals{#1}\alphabeticnumerals{#1})} \defineconversion[laar][\laarconv] \def\alpharconv#1{\greeknumerals{#1})} \defineconversion[alphar][\alpharconv] \definestructureconversionset[myconvset][,A,I,n,ar,aar,lnr,lar,laar,alphar] \setupheads[part, chapter, section, subsection, subsubsection, subsubsubsection, subsubsubsubsection, subsubsubsubsubsection, subsubsubsubsubsubsection, subsubsubsubsubsubsubsection][sectionconversionset=myconvset] \setuphead[chapter][sectionsegments=chapter] \setuphead[section][sectionsegments=section] \setuphead[subsection][sectionsegments=subsection] \setuphead[subsubsection][sectionsegments=subsubsection] \setuphead[subsubsubsection][sectionsegments=subsubsubsection] \setuphead[subsubsubsubsection][sectionsegments=subsubsubsubsection] \setuphead[subsubsubsubsubsection][sectionsegments=subsubsubsubsubsection] \setuphead[subsubsubsubsubsubsection][sectionsegments=subsubsubsubsubsubsection] \setuphead[subsubsubsubsubsubsubsection][sectionsegments=subsubsubsubsubsubsubsection] \def\startA{\startchapter} \def\stopA{\stopchapter} \def\startI{\startsection} \def\stopI{\stopsection} \def\startS{\startsubsection} \def\stopS{\stopsubsection} \def\startSS{\startsubsubsection} \def\stopSS{\stopsubsubsection} \def\startSSS{\startsubsubsubsection} \def\stopSSS{\stopsubsubsubsection} \def\startX{\startsubsubsubsubsection} \def\stopX{\stopsubsubsubsubsection} \def\startXX{\startsubsubsubsubsubsection} \def\stopXX{\stopsubsubsubsubsubsection} \def\startXXX{\startsubsubsubsubsubsubsection} \def\stopXXX{\stopsubsubsubsubsubsubsection} \def\startXXXX{\startsubsubsubsubsubsubsubsection} \def\stopXXXX{\stopsubsubsubsubsubsubsubsection} \setupcombinedlist[content][list={chapter, section, subsection, subsubsection, subsubsubsection, subsubsubsubsection, subsubsubsubsubsection, subsubsubsubsubsubsection, subsubsubsubsubsubsubsection},alternative=c] \starttext \placecontent \startA[title={First level}] \startI[title={Second level}] \startS[title={Third level}] \startSS[title={Fourth level}] \startSSS[title={Fifth level}] \startX[title={Sixth level}] \startXX[title={Seventh level}] \startXXX[title={Eighth level}] \startXXXX[title={Ninth level}] \stopXXXX \stopXXX \stopXX \stopX \stopSSS \stopSS \stopS \stopI \stopA \startA[title={Another first level}] \stopA \stoptext

3 4

beta 2019.12.02 18:38 fails to build format
by Thomas A. Schmitz 05 Dec '19

05 Dec '19

Hi all, has this already been reported? On my macOS machine, the latest lmtx beta fails to build the format with this error: tex error > tex error on line 99 in file hand-ini.mkxl: ! Undefined control sequence <inserted text> ...ansion :\currentexpansion }{\adjustspacingstep \expansionparameter \c!ste... \define_expansion ...i \the \everydefineexpansion \let \currentexpansion \sa... <to be read again> \syst_helpers_triple_empty_two_nop \par l.99 I have looked at the file, but couldn’t find the source of the error. All best Thomas

3 4

Setuppagenumbering for single page only
by Denis Maier 04 Dec '19

04 Dec '19

Hi, is it possible to change the pagelayout for one page only? Something like \thispagestyle{empty} in LaTeX? Best, Denis

2 2

Re: [NTG-context] issue with beta from 2019.11.29 21:47 in Windows
by Hans Hagen 04 Dec '19

04 Dec '19

On 12/3/2019 12:07 AM, Akira Kakuto wrote: > Dear Pablo, > >> \executesystemcommand{contextjit --purgeall >> --arguments="OptionThis={\ThisOption},OptionThat={\ThatOption}" >> second.tex} > > In my new lua[jit]tex binaries, encoding in a command line > is assumed to be the default code page of a system which depends > on a country or a machine. The code page of arguments in the > command line is changed into utf-8 in the initial stage by using the > information > of the default code page. > Thus your example does not work unless a system call GetACP() > returns CP_UTF8 or 65001, sorry for the inconvenience. in luatex one can check this from lua with print(lua.getcodepage()) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

2 2

Adding line numbers to all pages?
by Weber, Matthias 03 Dec '19

03 Dec '19

Dear All, Is there a simple way to add line numbers to the margin of each page of a document? They should recommence at 1 on every page, and either omit formulas or handle them “gracefully”. I’d be happy to have any ad-hoc solution. Thanks, Matthias \starttext \input tufte \startformula 1+1=1 \stopformula \input knuth \input tufte \startformula 1+1=2 \stopformula \input knuth \input tufte \startformula 1+1=3 \stopformula \input knuth \stoptext

1 1

What is the meaning of `\start`
by denis.maier.lists＠mailbox.org 02 Dec '19

02 Dec '19

Hi, in some examples I have found `\start` and `\stop`. What are they exactly? Just like `\begingroup` `\endgroup`? Or is there something else? Best, Denis

2 1

Re: [NTG-context] Transparency (Metapost)
by Jeong Dal 02 Dec '19

02 Dec '19

> \ Dear Fabrice, I got color and transparency using the following command in LMTX(metafun). fill p withcolor yellow withtransparency(1, .75); I hope that it helps. Best regards, Dalyoung

4 4

Re: [NTG-context] Transparency (Metapost)
by Jeong Dal 01 Dec '19

01 Dec '19

Dear Fabrice, I run your code using ConTeXt LMTX and got the figure. (LuaMetaTeX 2.00, ConTeXt version: 2019.11.14.) I don’t know why you have errors. Here is the beginning of log file: resolvers | formats | executing runner 'run luametatex format': /Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin/luametatex --jobname="test" --fmt=/Users/graph/ConTeXtLMTX/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=/Users/graph/ConTeXtLMTX/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui cont-yes.mkiv --c:autopdf --c:currentrun=1 --c:fulljobname="/Users/graph/Documents/TeXfiles/test.tex" --c:input="/Users/graph/Documents/TeXfiles/test.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:purge --c:texmfbinpath="/Users/graph/ConTeXtLMTX/tex/texmf-osx-64/bin" This is LuaMetaTeX, Version 2.00.0 open source > level 1, order 1, name 'cont-yes.mkiv' system > system > ConTeXt ver: 2019.11.14 17:47 MKIV beta fmt: 2019.11.19 int: english/english system > system > 'cont-new.mkiv’ loaded Best regards, Dalyoung > > \starttext > \startMPcode > defaultfont := "texgyrepagella-regular*default" ; > defaultscale :=0.8; > > color brown; > brown = (0.128,0.00,0.00); > > path twos, threes, sixes; > twos = fullcircle xscaled 4cm yscaled 2cm rotated 180 > shifted 42 left; > threes = fullcircle xscaled 4cm yscaled 2cm shifted 42 right; > sixes = buildcycle(twos, threes); > > fill twos withcolor brown withtransparency(1,0.75); > fill threes withcolor yellow withtransparency(1,0.75); > fill sixes withcolor yellow + brown withtransparency(1,0.75); > > draw twos; > draw threes; > > label("...",(1.5cm,0)); > label("...",(0,0)); > label("...",(-1.5cm,0)); > label.top("yeux marron",(-1.5cm,1.25cm)); > label.top("cheveux blonds",(1.5cm,1.25cm)); > \stopMPcode > \stoptext

1 0

Transparency (Metapost)
by Fabrice Couvreur 01 Dec '19

01 Dec '19

Hello, I have a little trouble with the management of transparency : the colors are not respected. Thank you. Fabrice \starttext \startMPcode defaultfont := "texgyrepagella-regular*default" ; defaultscale :=0.8; color brown; brown = (0.165,0.42,0.42); path twos, threes; twos = fullcircle xscaled 4cm yscaled 2cm rotated 180 shifted 42 left; threes = fullcircle xscaled 4cm yscaled 2cm shifted 42 right; fill twos withcolor transparent(1,0.4,brown); fill threes withcolor transparent(1,0.4,yellow); draw twos; draw threes; label("...",(1.5cm,0)); label("...",(0,0)); label("...",(-1.5cm,0)); label.top("yeux marron",(-1.5cm,1.25cm)); label.top("cheveux blonds",(1.5cm,1.25cm)); \stopMPcode \stoptext [image: blond.jpg]

1 0

missing files in cld-mkiv
by Damien Thiriet 30 Nov '19

30 Nov '19

Hi, Files cld-005.pdf are missing in my version of the clm-mkiv manual. Regards, Damien Thiriet

1 0

Re: [NTG-context] [LMTX urgent] core keeps getting dumped after 2019.11.28 LMTX update
by Hans Hagen 30 Nov '19

30 Nov '19

On 11/29/2019 12:17 PM, Floris van Manen wrote: > > > On 29-11-2019 10:34, Hans Hagen wrote: >> On 11/29/2019 7:32 AM, Floris van Manen wrote: >>> Anyone? >>> >>> After updating LMTX to the latest version 2019.11.28, context stopped >>> working, only to produce core dumps ... >>> >>> Any hints as how to resolve this? >> wipe the cache > > i removed the cache using: > rm -r tex/texmf-cache/luatex-cache/context > > without much improvement... I think that i found the reason so i'll do a new upload later. There have been a few (not that large) changes in the engine wrr to (1) font memory used at the tex end (not dramatic but for huge fonts it matters), (2) some (potential) improvements of hz and protrusion (removing dead code and improving directional awareness) and (3) normalzation of node lists (very experimental but won't kick in normally). Thanks for testing betas, Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0

[LMTX urgent] core keeps getting dumped after 2019.11.28 LMTX update
by Floris van Manen 29 Nov '19

29 Nov '19

Anyone? After updating LMTX to the latest version 2019.11.28, context stopped working, only to produce core dumps ... Any hints as how to resolve this? Thanks! .Floris resolvers | formats | executing runner 'run luametatex format': /home/vm/data/context/tex/texmf-linux-64/bin/luametatex --jobname="zzz" --fmt=/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui cont-yes.mkiv --c:currentrun=1 --c:fulljobname="./zzz.tex" --c:input="./zzz.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:texmfbinpath="/home/vm/data/context/tex/texmf-linux-64/bin" This is LuaMetaTeX, Version 2.01.0 open source > level 1, order 1, name 'cont-yes.mkiv' system > system > ConTeXt ver: 2019.11.28 14:27 MKIV beta fmt: 2019.11.29 int: english/english system > system > 'cont-new.mkiv' loaded open source > level 2, order 2, name '/home/vm/data/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > beware: some patches loaded from cont-new.mkiv close source > level 2, order 2, name '/home/vm/data/context/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > files > jobname 'zzz', input './zzz', result 'zzz' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > level 2, order 3, name './zzz.tex' fonts > beware: no fonts are loaded yet, using 'lm mono' in box fonts > otf loading > loading '/home/vm/data/context/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf', hash 'lmmono10-regular' fonts > otf loading > loading done fonts > otf loading > saving '/home/vm/data/context/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf' in cache system > lua > compiling '/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otl/lmmono10-regular.tma' into '/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otl/lmmono10-regular.tmd' system > lua > dumping '/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otl/lmmono10-regular.tma' into '/home/vm/data/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otl/lmmono10-regular.tmd' stripped fonts > otf loading > loading, optimizing, packing and caching time 0.029 Floating point exception (core dumped) mtx-context | fatal error: return code: 34816

3 4

Fwd: Re: Spurious newlines at beginning of startstop pair
by denis.maier.lists＠mailbox.org 29 Nov '19

29 Nov '19

Hans, thanks for your answer. But two questions: First: Am I right to assume that the important part is `\GetPar`. The rest is syntactic sugar to make to code more ConTeXt-like, right? Second: For some reasons I have not received your message. It wasn't in the Spam folder and I usually receive mails from the list. Any ideas? Are there some known problems? Best, Denis On 11/27/2019 2:17 PM, Denis Maier wrote: > Hi, > I have this file: > > -------------------------------------------------------------- > \newdimen\cslhangindent > \cslhangindent=1.5em > \definestartstop [cslreferences] [ > before={% > \setupnarrower[left=\cslhangindent] > \startnarrower[left]% > \setupindenting[-\leftskip,yes,first]% > \indentation% > }, > after=\stopnarrower, > ] > > \starttext > > \section{Some title} > > \input ward > > \section{References} > > \startcslreferences > > \dorecurse{10}{\dorecurse{10}{This is a Test. }\par} > > \stopcslreferences > > \stoptext > -------------------------------------------------------------- > > The skip after the `\section{References}` is bigger than after > `\section{Some title}`. Why is that? If I delete the empty line after > `\startcslreferences`, the skips are identical. > > Is there a way to take care of this through `\definestartstop`? you need to get rid of the empty line \definenarrower[whatever][left=1.5em] \definestartstop [cslreferences] [before={% \startwhatever[left] \setupindenting[-\leftskip,yes,first] \indentation \GetPar }, after=\stopwhatever] \showframe \starttext \section{Some title} \input ward \section{References} \startcslreferences \dorecurse{10}{\dorecurse{10}{This is a Test. }\par} \stopcslreferences \stoptext

5 6

Watchmode
by Denis Maier 29 Nov '19

29 Nov '19

Hi, is there a watchmode for ConTeXt? So that I can it once and ConTeXt will re-typeset a file once there are changes? Best, Denis

3 2

Abstracting styles
by Juraj Fiala 28 Nov '19

28 Nov '19

Hi, I’m trying to learn ConTeXt, but I’m discovering a few hurdles along the way. Essentially what I currently want to do is to emulate paragraph styles found in other software, e.g. Scribus. After several hours of research all I have in my head is a complete mess of conflicting approaches, so I’d like to get some sane present-day advice. :-) Say I wanted to achieve this (as a rough example, the point is mixing weights and OpenType features in different contexts): Heading 1: Source Serif Semibold, smcp=yes, 12% letter-spacing Heading 2: Source Serif Semibold Emphasis: Source Serif Regular, smcp=yes, 8% letter-spacing What is the most straightforward way should I load the fonts and set the ‘styles’? Thanks!

3 3

tikz
by Ursula Hermann 28 Nov '19

28 Nov '19

Hello everyone! I have: \usemodule{tikz} \starttext \starttikzpicture node {root} child {node {left}} child {node {right} child {node {child}} child {node {child}} } \stoptikzpicture \stoptext Then after compiling I have the following mistake: Command Line: context.exe --synctex=-1 "picture test.tex" Startup Folder: C:\Users\Hermann\Downloads\context-mswin\tex\texmf-context\doc\context\sources\general\manuals\nodes resolvers | formats | executing runner 'run luametatex format': C:/Users/Hermann/Downloads/context-mswin/tex/texmf-mswin/bin/luametatex --jobname="picture test" --fmt=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.fmt --lua=C:/Users/Hermann/Downloads/context-mswin/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luametatex/cont-en.lui cont-yes.mkiv --c:currentrun=1 --c:fulljobname="./picture test.tex" --c:input="./picture test.tex" --c:kindofrun=1 --c:maxnofruns=9 --c:synctex="-1" --c:texmfbinpath="C:/Users/Hermann/Downloads/context-mswin/tex/texmf-mswin/bin" This is LuaMetaTeX, Version 2.01.0 open source > level 1, order 1, name 'cont-yes.mkiv' system > system > ConTeXt ver: 2019.11.13 00:08 MKIV beta fmt: 2019.11.27 int: english/english system > system > 'cont-new.mkiv' loaded open source > level 2, order 2, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > beware: some patches loaded from cont-new.mkiv close source > level 2, order 2, name 'C:/Users/Hermann/Downloads/context-mswin/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv' system > files > jobname 'picture test', input './picture test', result 'picture test' fonts > latin modern fonts are not preloaded languages > language 'en' is active system > synctex functionality is enabled, expect 5-10 pct runtime overhead! open source > level 2, order 3, name './picture test.tex' fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded tex error > tex error on line 5 in file ./picture test.tex: ! Undefined control sequence l.5 \starttikzpicture 1 2 \usemodule{tikz} 3 4 \starttext 5 >> \starttikzpicture 6 node {root} 7 child {node {left}} 8 child {node {right} 9 child {node {child}} 10 child {node {child}} 11 } 12 \stoptikzpicture 13 \stoptext The control sequence at the end of the top line of your error message was never \def'ed. You can just continue as I'll forget about whatever was undefined. mtx-context | fatal error: return code: 1 _____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 1 Warnings: 0 Bad Boxes: 0 What is the mistake here? Many Thanks Uschi

5 4

Spurious newlines at beginning of startstop pair
by Denis Maier 28 Nov '19

28 Nov '19

Hi, I have this file: -------------------------------------------------------------- \newdimen\cslhangindent \cslhangindent=1.5em \definestartstop [cslreferences] [ before={% \setupnarrower[left=\cslhangindent] \startnarrower[left]% \setupindenting[-\leftskip,yes,first]% \indentation% }, after=\stopnarrower, ] \starttext \section{Some title} \input ward \section{References} \startcslreferences \dorecurse{10}{\dorecurse{10}{This is a Test. }\par} \stopcslreferences \stoptext -------------------------------------------------------------- The skip after the `\section{References}` is bigger than after `\section{Some title}`. Why is that? If I delete the empty line after `\startcslreferences`, the skips are identical. Is there a way to take care of this through `\definestartstop`? Best, Denis

2 1

documenting sources
by Pablo Rodriguez 27 Nov '19

27 Nov '19

Dear list, I would like to be abbe to commento some ConTeXt code that we use at work. From what I see in the distribution itself, %D is the way to comment text (and %C the copyright information). Sorry, I don’t even know how to look for this (either in the distribution, or in the wiki). I would like to know how to compile back-swf.mkiv to get the documentation. Which is the right command for that? Many thanks for your help, Pablo -- http://www.ousia.tk

2 2

R module
by Fabrice L 25 Nov '19

25 Nov '19

Dear list, I’m teaching with R this term, and I tried (without success) the R-module (I think the path of R is not found). Having no time to test and find out the problem, I have tried with success knitr (with is Rmarkdown code converted to latex-beamer). But I’m missing Context… My understanding is that the R-module is working only with mk-ii. Is there people in this list using successfully the r-module with mk-iv ? Thanks, Fabrice.

3 5

Re: [NTG-context] Difference between direct use of quotation marks and \quotation
by denis.maier.lists＠mailbox.org 25 Nov '19

25 Nov '19

Hi, is it possible to enable hanging punctuation only on the right margin? I think that's the way the microtype package does that in LaTeX, but I don't know how to replicate this behavior in ConTeXt. Best, Denis > denis.maier(a)mailbox.org hat am 23. November 2019 um 00:27 geschrieben: > > > Hi, > > is it possible to enable hanging punctuation only on the right margin? I > think that's the way the microtype package does that in LaTeX, but I don't > know how to replicate this behavior in ConTeXt. > > Best, > Denis > > -----Ursprüngliche Nachricht----- > Von: ntg-context <ntg-context-bounces(a)ntg.nl> Im Auftrag von Wolfgang > Schuster > Gesendet: Freitag, 22. November 2019 19:04 > An: mailing list for ConTeXt users <ntg-context(a)ntg.nl> > Betreff: Re: [NTG-context] Difference between direct use of quotation marks > and \quotation > > Tomas Hala schrieb am 22.11.2019 um 18:55: > > Hi all, > > > > I have got two "same" documents which differ at the left side when the > > hanging punctuation has been enabled. > > The difference is in use of quotation marks. (It seems as a language > > and font independent problem.) > > > > How can I persuade macro \quotation to move the punctuation outside the > > frame? > \setupdelimitedtext[quotation][method=font] > > Wolfgang > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context(a)ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : > https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > ___________________________________________________________________________________

3 3

ConTeXt as a service
by Denis Maier 24 Nov '19

24 Nov '19

Hi everyone, Is it possible to run ConTeXt as a service on a server? If yes, is there documentation about this? Background: I'm currently on the PKP conference, and we are discussing OJS plugins for automated PDF production. I was wondering if ConTeXt could be an option... Best, Denis P.S.: I'll be giving here a brief introduction to XML typesetting with ConTeXt to spread the word... just to let you know.

8 22

NewComputerModern
by luigi scarso 24 Nov '19

24 Nov '19

https://ctan.org/pkg/newcomputermodern """ This is a new assembly of Computer Modern fonts plus glyphs for non latin alphabets which are considered compatible in style to CM fonts. The fonts contain Latin and accented Latin letters and combinations, Greek (monotonic and polytonic), and Cyrillic. """ -- luigi

1 0

Difference between direct use of quotation marks and \quotation
by Tomas Hala 23 Nov '19

23 Nov '19

Hi all, I have got two "same" documents which differ at the left side when the hanging punctuation has been enabled. The difference is in use of quotation marks. (It seems as a language and font independent problem.) How can I persuade macro \quotation to move the punctuation outside the frame? Best wishes, Tomáš %%% MWE: \setupalign[hz,hanging] \definefontfeature [default] [default] [protrusion=quality, expansion=quality] \starttext\showframe one \hfill two \crlf „three“ four \par one \hfill two \crlf \quotation{three} four \stoptext

2 2

eqalign
by nohop＠posteo.org 22 Nov '19

22 Nov '19

Dear All, The command \eqalign does not work as described under: https://wiki.contextgarden.net/Math_with_newmat as the ampersands are typeset (and the equal signs unaligned). The following minimal example shows the issue: ------------- \usemodule[newmat] \starttext \startformula \eqalign{ A & = x\cr & = y\cr} \stopformula \stoptext ------------- (Issue showing up in context 2019.11.14 17:07.) Best regards.

3 4

LuaTeX incompatible with Lua
by Henri Menke 21 Nov '19

21 Nov '19

Dear list, The following Lua script behaves differently when executed in Lua vs. LuaTeX. print(os.execute("date")) It seems that the definition of os_execute in loslibext.c was copied over from Lua 5.1 and not adapted to newer versions. $ lua5.1 test.lua 0 $ lua5.2 test.lua true exit 0 $ lua5.3 test.lua true exit 0 $ texlua test.lua 0 $ luajit test.lua 0 $ texluajit test.lua 0 As you can see from the example, this comes with the additional complication that LuaJIT has Lua 5.1 behaviour and should also retain that. Cheers, Henri

2 2

ConTeXt as a service
by Brian Ballsun-Stanton 21 Nov '19

21 Nov '19

In reply to: https://mailman.ntg.nl/pipermail/ntg-context/2019/096313.html I personally run ConTeXt as a service (as a sort of do-it-yourself Overleaf). I use floobits (https://floobits.com/Denubis) as an intermediary code server, and their floomatic sevice(https://floobits.com/help/floomatic) running on a server I have. That then calls a shell script that invokes ConTeXt, which writes logs and pdfs to an nginx monitored folder. It's been running for about 4 years now and has been solid enough for me to use without thinking too much about. Happy to share code and details. My deployment is super-hacky, but it works? -Brian

1 0

setup according to total numbers
by Pablo Rodriguez 21 Nov '19

21 Nov '19

Hi Hans, this is related to a previous message (https://mailman.ntg.nl/pipermail/ntg-context/2019/096253.html) I don’t know how hard could to implement them, but it would be useful to be able to setup xtables and lists based on the total number of columns, rows and items. Some cases would be: - Set a different width in list if their total number of items is more than 9 and another one if items are more than 19. - List iwith alphabetic numbering when it contains fewer items than 5 and with digits in other case. - Stretch xtable to width, if it contains more than 4 columns. - Stretch xtable to height, if it contains more than 10 rows. Sure, there may be plenty of other cases in which being able to setup xtables and list based on the total number of their elements would be handy. I wonder whether it would be possible to have commands that provide the number of these elements to be used to set them up. Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

two issues with inmargin attachments
by Pablo Rodriguez 21 Nov '19

21 Nov '19

Hi Hans, I have the following sample, using latest beta from 2019.11.14 17:07: \setuppapersize[A5] \showframe \setupinteraction[state=start] \setupinteractionscreen[option=attachment] \starttext a\attachment[file=xml-mkiv.pdf] b\attachment[file=mkiv-publications.pdf] c\attachment[file=onandon.pdf, location=inmargin] d\attachment[file=notnow.pdf, location=inmargin] e\attachment[file=about.pdf, location=text] f\attachment[file=i-context.pdf, location=text] \stoptext The default location seems to be "text", but when specified as option it prevents the attachment. The general configuration for location may be different, but in that case it seems impossible to use "text" for a single attachment. "location=inmargin" seems to place all /FileAttachment annotations on the same place (when from the same line, they have the same /Rect), as shown in the excerpt: 21 0 obj << /Type /Annot /NM (attachment:3) /Subtype /FileAttachment /Rect [ 35.54572 493.13349 41.52002 499.1078 ] >> endobj 22 0 obj << /Type /Annot /NM (attachment:4) /Subtype /FileAttachment /Rect [ 35.54572 493.13349 41.52002 499.1078 ] >> endobj Would it be possible that inmargin attachments allow more than one from the same line? Many thanks for your help, Pablo -- http://www.ousia.tk

1 0

Exchangeing content of variables between luacode and context
by Rudolf Bahr 21 Nov '19

21 Nov '19

Hello All! To send variable contents from context to luacode I can put them into the function invocation or use 'tokens.getters.macro("TestA")', an interesting and very nice possibility to let luacode itself getting contents of context macros. The (only?) way back, from luacode to context, could be done by 'tokens.setters.macro("TestA","a")' [1] . Now, to store Luacode's variable contents permanently in context programs I could Luacode let copy my ConTeXt program to another place on disk with a newly defined macro inside. But, does somebody know (by chance) of another, more elegant possibility? I think giving back a value by "return" won't work. Best wishes, Rudolf [1] Hans Hagen, "ConTeXt Lua Documents", January 12, 2018, 7.4, page 63

4 5

[updating LMTX]
by Floris van Manen 20 Nov '19

20 Nov '19

when updating lmtx using the install.sh script, it seems to be unable to find among others, the web2c . It looks everywhere, except the location where it was put by that script in the first place. /home/vm/data/context/tex/texmf/web2c the $PATH contains /home/vm/data/context/tex/texmf-linux-64/bin I have no clue as how to interpret the log. Should i define $TEXMF ? .F ... mtxrun | forcing cache reload resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/home/vm/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/home/vm/data/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/home/vm/data/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/home/vm/data/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for regular 'texmfcnf.lua' on given path '/home/vm/data/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/home/vm/texmf/web2c' from specification 'home:texmf/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/home/vm/data/texmf-local/web2c' from specification 'selfautoparent:/texmf-local/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/home/vm/data/texmf-context/web2c' from specification 'selfautoparent:/texmf-context/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/home/vm/data/texmf-dist/web2c' from specification 'selfautoparent:/texmf-dist/web2c' resolvers | resolving | looking for fallback 'contextcnf.lua' on given path '/home/vm/data/texmf/web2c' from specification 'selfautoparent:/texmf/web2c' resolvers | resolving | resolvers | resolving | warning: no lua configuration files found resolvers | resolving | no texmf paths are defined (using TEXMF) ... mtxrun | unknown script 'cache.lua' or 'mtx-cache.lua' ...

1 0

ConTeXt: specify a path to font in \definefontfamily
by Krešimir Cindrić 20 Nov '19

20 Nov '19

I'm *very* new to ConTeXt, so please excuse the newbie question. I'm trying to load a font from a file. The .otf files are stored in a directory named fonts/ which is in the directory of the .tex file I'm trying to compile. This code does not work, and reverts to the default font: \definefontfamily [mainface][serif] [My Font] [tf=file:./fonts/MyFont.otf, it=file:./fonts/MyFont-It.otf, bf=file:./fonts/MyFont-Bd.otf, bi=file:./fonts/MyFont-BdIt.otf] \setupbodyfont[mainface] \starttext\title{Hello, world!} Hello World! \emph{Hi!} \stoptext However, if I copy the .otf files into the same directory as the .tex file, and write tf=file:MyFont.otf etc, then everything works fine. How do I specify a relative path to the font, inside the .tex file? In LaTeX, I would use fontspec package and do the following: \setmainfont {MyFont.otf} [Path =./fonts/, ItalicFont = MyFont-It.otf] However, I couldn't find the equivalent syntax for \definefontfamily in ConTeXt. Just to mention, I am using ConTeXt version: 2019.03.21 21:39 as part of TeX Live, on Manjaro Linux. Regards, Krešimir

3 4

context command line interface documentation?
by Philipp A. 20 Nov '19

20 Nov '19

Hi, I want context to shut up, specifically the “mkiv lua stats” at the end are useless to me and make me scroll up for actual error messages, but better would be to just stop after the first error. I consulted the --help docs but found them entirely unhelpful. Also there’s no examples. As doing it wrong results in no error message or indeed any kind of effect, I was in the dark. First I consulted the --help and found: “--silent=list disable logcatgories (show list with --showlogcategories)”. What’s a “list”? comma separated? Do I need string delimiters? Whatever, executing “context --showlogcategories” tells me the log category “mkiv lua stats” exists, so: “context --silent='mkiv lua stats' doc.tex” does … nothing, the lua stats are still there mocking me. OK, let’s do what you do when there’s no documentation; dive in the code: “grep -C3 'batchmode' /usr/share/texmf-dist/scripts/context/lua/mtx-context.lua” This tells me that there’s a “errorstopmode” in luatex but no way to make the context script invoke “luatex -interaction=errorstopmode”, great. Diving deeper, “setblocked” in mtxtun.lua checks if --silent=all is specified, nice! But that affects everything EXCEPT for the “mkiv lua stats”. Therefore the two most useful ways to run context (--errorstopmode and --silent='mkiv lua stats') seem impossible unless one writes a wrapper script. Would be cool to have this fixed. And to have actually useful documentation instead of having to deep-dive into mtxrun.lua. Best, Philipp PS: I filed http://tracker.luatex.org/view.php?id=1014 and http://tracker.luatex.org/view.php?id=1015

3 7

[Widgets] Any good examples for developing JS-enabled PDFs that calculate?
by Paul Mazaitis 20 Nov '19

20 Nov '19

Hi everyone, My goal is to have a PDF that - allows users to input numeric information in various fields, - makes calculations on the data in those fields, - ...and reports that information somewhere in the PDF. It seems that the widget support could handle this, but I'm struggling to understand how the pieces go together; does anyone have an example of this use case I could puzzle over? Many thanks! -Paul

4 7