- ntg-context - Mailing Lists

large delimiters for equation
by Roger Mason 25 Nov '13

25 Nov '13

Hello, I'd like to have delimiters that match the height of the fraction in an expression like this: \startformula c\Delta T = t\big{(} \frac{c}{v_s} - \frac{c}{v_f} \big{)}. \stopformula I looked in the docs and tried a few likely solutions without luck. Please accept my apologies if this is documented eleswhere. Thanks, Roger

2 2

Re: [NTG-context] Converting (a not so) normal font into bold
by "H. Özoguz" 25 Nov '13

25 Nov '13

> test code: > > \starttext > > \showotfcomposition{file:uthmanichafs1ver09.ttf*arabic}{r2l}{١} \page > \showotfcomposition{file:uthmanichafs1ver09.ttf*arabic}{r2l}{١ ١} \page > \showotfcomposition{file:uthmanichafs1ver09.ttf*arabic}{r2l}{١١} \page > > % \usemodule[fonts-coverage] > % \showfontcomparison[list=file:uthmanichafs1ver09.ttf] > > \stoptext Thank you very much, Hans! Now all issues with this font are solved (new issues within my actual project will surely follow, but no font-issues, I hope). I have to say once more, that I never had experienced before a such fast and competent software-support, that is at least as valuable as the software itself is! To your comments: Ok, yes, it is not a really normal font. It is specially designed for typesetting the holy quran (which is really no easy work). And there is so absolutely no problem that ALL numbers are mapped to ligatures -> there are no digits in the text of the holy quran :) (all numbers are written out at that time). Thanks again! Huseyin

1 0

Re: [NTG-context] Intermediate format
by Aditya Mahajan 25 Nov '13

25 Nov '13

On Mon, 25 Nov 2013, Jan Tosovsky wrote: > On 2013-11-25 Hans Hagen wrote: >> On 11/24/2013 8:32 PM, Jan Tosovsky wrote: >>> >>> is it possible to get the complete representation of the layout that >>> is processed in the luatex PDF generator? >>> >>> I mean coordinations of individual text boxes, their dimensions etc. >>> >>> Actually, I'd like to retrieve the page number and vertical position >>> of my object with a specific id (reference) to be able to perform PDF >>> post-processing. >> >> \starttext >> >> we are here: \setposition{crap}(\MPx{crap},\MPy{crap}) >> >> \stoptext > > Thanks! Looks promising, Actually I'd like to print it into a log or > somewhere else, not into the document itself. But I need also the page > number. Every record should be ideally in the form: ID;page-number;Y-coord. \setposition{id} \message{id:\MPp{id};\MPy{id};\MPx{id}} should work (untested). Then you can parse the log file. Aditya

2 1

Re: [NTG-context] Intermediate format
by Hans Hagen 25 Nov '13

25 Nov '13

On 11/25/2013 9:07 PM, Jan Tosovsky wrote: > On 2013-11-25 Hans Hagen wrote: >> On 11/24/2013 8:32 PM, Jan Tosovsky wrote: >>> >>> is it possible to get the complete representation of the layout that >>> is processed in the luatex PDF generator? >>> >>> I mean coordinations of individual text boxes, their dimensions etc. >>> >>> Actually, I'd like to retrieve the page number and vertical position >>> of my object with a specific id (reference) to be able to perform PDF >>> post-processing. >> >> \starttext >> >> we are here: \setposition{crap}(\MPx{crap},\MPy{crap}) >> >> \stoptext > > Thanks! Looks promising, Actually I'd like to print it into a log or > somewhere else, not into the document itself. But I need also the page > number. Every record should be ideally in the form: ID;page-number;Y-coord. > >>> Is DVI way to go? How can I get it in MkIV? > > I've found that luatex can optionally output DVI [1], but I cannot find any > ConTeXt commandline switch to change the output format from PDF to something > else... indeed, no dvi ... it doesn't pay off to spend time on making all backend functionality multi-mode Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Re: [NTG-context] Intermediate format
by Hans Hagen 25 Nov '13

25 Nov '13

On 11/24/2013 8:32 PM, Jan Tosovsky wrote: > Dear All, > > is it possible to get the complete representation of the layout that is > processed in the luatex PDF generator? > > I mean coordinations of individual text boxes, their dimensions etc. > > In e.g. XSL-FO processors it is provided in the XML based formats: > > http://www.renderx.com/reference.html#IntermediateFormatSpecification > http://xmlgraphics.apache.org/fop/1.1/intermediate.html > > Actually, I'd like to retrieve the page number and vertical position of my > object with a specific id (reference) to be able to perform PDF > post-processing. > > Is DVI way to go? How can I get it in MkIV? old feature ... \starttext we are here: \setposition{crap}(\MPx{crap},\MPy{crap}) \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

Re: [NTG-context] Converting normal font into bold
by "H. Özoguz" 25 Nov '13

25 Nov '13

> i tried to reproduce your issue but gave up because of the fact that > it's unclear what (version) of the font is used ... you switched from 10 > to 09 and in 09 i see no 'big circular thing' so your version is > different from the one i donwload ... so, i cannot even be certain that > the font is okay ... so if you want to test: > > - make sure that you use fonts consistently > - make sure we know where to get that version of the font > - make sure that corel draw (or whatever) is using the same font You are right, sorry to annoy you here, some chaos in my place ... So, to clear all questions: for this min-example (which is at the moment my last unsolved problem with this font) I used this font: http://fonts.qurancomplex.gov.sa/download/UthmanicHafs1Ver09Font.zip And yes, Corel Draw uses this font, too. BUT: There might me some issue with this font relating this end-of-aya-symbol, independent from ConTeXt. See the attached JPG, which is the output of CorelDraw, if I input exactly the same arabic code, like in my example. You see in the picture a different behaviour between the one-digit and two-digit numbers aswell. But it is a different behaviour from ConText, the symbol is used, but the brackets are not replaced. Can you reproduce it now? Thanks! Huseyin

2 2

Re: [NTG-context] Converting normal font into bold
by "H. Özoguz" 25 Nov '13

25 Nov '13

> It is my believe that Unicode has the wrong properties for Arabic > standalone Hamza; in short you should just type a regular Hamza in the > middle of the word and it will get positioned correctly. Placing a > combining Hamza over a Tatweel to “fake” it is wrong IMO. So in Amiri > you just type “بِءَايَٰتِ” and voilà, every thing is rendered correctly (the > same is true for the small Alef). Yes, that works. But the direct way works with Uhtmanic1HafsVer9: \definefont[arabicamiri][file:amiri-regular.ttf*arabic at 15pt] \definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 17pt] \starttext \setupalign[r2l] \arabicamiri بِـَٔايَـٰتِ \blank \arabicuth بِـَٔايَـٰتِ \stoptext To be honest, in Corel Draw UthmanicHafs is the perfect font for my purpose - at least in CorelDraw - e.g.: The ayat-numbers are printed as a unicode-symbol, not as numbers (perfect, because ConTeXt has problems with the direction with arabic numbers, they are mirrored in ConTeXt). But it is only perfect in CorelDraw, in ConTeXt some things are not recognized correctly, as I mentioned. E.g. this one: \definefont[arabicamiri][file:amiri-regular.ttf*arabic at 15pt] \definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 17pt] \starttext \setupalign[r2l] \arabicuth لِّلْمُتَّقِينَ ﴿٢﴾ \stoptext If I put the same arabic into CorelDraw, it prints a nice Unicode-Symbol for the number - see the JPG I have attached here, screenshot from CorelDraw, but ConTeXt ignores the brackets and prints just a verys small number. There are some problems like this. Are they easy to fix, or is this problem deeply involved? Huseyin

3 2

Re: [NTG-context] Converting normal font into bold
by "H. Özoguz" 25 Nov '13

25 Nov '13

Hi Ondra, thanks for your help. > Apparently, replacing a number enclosed in ornate parentheses (U+FD3E > and U+FD3F) with a number in the "end of ayah" ornament is a specialty > of the UthmanicHafs font. If I input the digit (e.g. U+0662) and then > the special non-printable "end of ayah" character (U+06DD), ConTeXt > and Amiri successfully output the digit inside the ornament. Hmm, ok. But if it is a speciality of UthmanicHafs, why CorelDraw understands it natively? > Of course, since U+06DD is a non-printable character, it might be a > pain to work with in a text editor; you might want to define a custom > command for this purpose: > > \def\eoa#1{#1\char"06DD} Thanks, that works fine: \definefont[arabicamiri][file:amiri-regular.ttf*arabic at 15pt] \definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 17pt] \def\eoa#1{#1\char"06DD} \starttext \setupalign[r2l] \arabicuth لأَفَبِهَـٰذَا ٱلْحَدِيثِ أَنتُم مُّدْهِنُونَ ﴿٨١﴾\eoa \stoptext But now another question arises: How to input this command into my unicode of quran automatically? (I am using notepad++). Not the best way to do this manually for all 286 Ayas (and then search and replace for all ayas of all suras). And still: There must be some tricks in CorelDraw handling fonts, which would be great to have in ConText :) Thank you! Huseyin PS: Sorry for these annoyong thread-breaking all the time - I really do not know, what I make wrong here. I am using Thunderbird. If anybody knows how to use thunderbird for email lists correctly, I would be thankful.

2 1

Re: [NTG-context] Converting normal font into bold
by "H. Özoguz" 25 Nov '13

25 Nov '13

> Thanks, that works fine: > > \definefont[arabicamiri][file:amiri-regular.ttf*arabic at 15pt] > \definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 17pt] > \def\eoa#1{#1\char"06DD} > \starttext > \setupalign[r2l] > \arabicuth لأَفَبِهَـٰذَا ٱلْحَدِيثِ أَنتُم مُّدْهِنُونَ ﴿٨١﴾\eoa > \stoptext Now I could locate the error in ConText better, see this code and the mistake, which occurs: \definefont[arabicuth][file:UthmanicHafs1Ver09.ttf*arabic at 17pt] \define[1]\eoa{#1\char"06DD} \starttext \setupalign[r2l] \arabicuth إِنَّ ٱلَّذِينَ كَفَرُوا سَوَآءٌ عَلَيْهِمْ ءَأَنذَرْتَهُمْ أَمْ لَمْ تُنذِرْهُمْ لَا يُؤْمِنُونَ ﴿٦﴾\blank إِنَّ ٱلَّذِينَ كَفَرُوا سَوَآءٌ عَلَيْهِمْ ءَأَنذَرْتَهُمْ أَمْ لَمْ تُنذِرْهُمْ لَا يُؤْمِنُونَ ﴿٦٦﴾ \stoptext (I have attached the compiled PDF). The first aya, with a single one-digit number is not regonized correctly, but the second is (with a two-digit-number). Why? Huseyin

2 1

Re: [NTG-context] ToC - right-alignment of roman numerals
by Jan Tosovsky 24 Nov '13

24 Nov '13

On 2013-11-18 Jan Tosovsky wrote: > > On 2013–06–03 Jan Tosovsky wrote: > > in fresh MkIV I use the following commands for building ToC, but I > > have no idea how to align the label (roman numeral) to the right. > > I am almost there, but things get complicated when chapters are > combined with preface/index titles without numbering and thus aligned > improperly: > > \setupcombinedlist[content][list=chapter, alternative=c] > \setupcombinedlist[chapter][ > distance=1em, > width=1cm, > > numbercommand={\simplealignedbox{\listparameter{width}}{flushright}}, > ] > > \starttext > \completecontent > > \startfrontmatter > \chapter{Preface}text > \stopfrontmatter > > \startbodymatter > \chapter{Chapter}text\index{primary} > \stopbodymatter > > \startbackmatter > \completeindex > \stopbackmatter > > \stoptext > > Is there any way how to indent these non-numbered titles so that they > start where the chapter title starts? I've fixed it by applying a margin to everything and setting a negative width to the numbers (distance = -width): \setupcombinedlist[chapter][ distance=0.5cm, width=-0.5cm, margin=2cm, numbercommand={\simplealignedbox{\listparameter{width}}{flushright}}, ] I don't know exactly why it works, but it works :-) Jan

1 0