- ntg-context - Mailing Lists

Re: Sorry for once more asking, i am at Work
by Ursula Hermann 21 Feb '24

21 Feb '24

Dear List, I have done the new download at Work. After compiling is always the same: Command Line: context.exe --synctex=-1 "context-test.tex" Startup Folder: C:\Users\Hermann\Downloads\context-mswin\tex\texmf-context\tex\context\test\mkiv startup error : no format file given, quitting I wrote on Wednesday last week. I also did an download of cont- lmt and cont- tmf. Don't know if there is a mistake which is my fault? I don't know, maybe important: The log file says: This is pdfTeX, Version 3.141592653-2.6-1.40.25 (TeX Live 2023) (preloaded format=pdflatex 2024.2.6) 19 FEB 2024 12:41 entering extended mode restricted \write18 enabled. %&-line parsing enabled. **context-test.tex (./context-test.tex LaTeX2e <2023-11-01> patch level 1 L3 programming layer <2024-01-22> ! Undefined control sequence. l.1 \starttext ? ! Emergency stop. l.1 End of file on the terminal! Here is how much of TeX's memory you used: 16 strings out of 474221 403 string characters out of 5750189 1922978 words of memory out of 5000000 22371 multiletter control sequences out of 15000+600000 558069 words of font info for 36 fonts, out of 8000000 for 9000 1141 hyphenation exceptions out of 8191 12i,0n,13p,58b,8s stack positions out of 10000i,1000n,20000p,200000b,200000s ! ==> Fatal error occurred, no output PDF file produced! Uschi Von: Ursula Hermann Gesendet: Mittwoch, 14. Februar 2024 14:16 An: 'mailing list for ConTeXt users' <ntg-context(a)ntg.nl> Betreff: AW: Sorry for once more asking, i am at Work Dear Hans, This was before you wrote, that you did an new upload, but i saw it in the installation. Because there were more files. Uschi Von: Ursula Hermann Gesendet: Mittwoch, 14. Februar 2024 13:42 An: 'mailing list for ConTeXt users' <ntg-context(a)ntg.nl<mailto:ntg-context@ntg.nl>> Betreff: Sorry for once more asking, i am at Work So after a new update on my Computer at Work, I did once more download the installation. After compiling with context-mswin I got this file Command Line: context.exe --synctex=-1 "context-test.tex" Startup Folder: C:\Users\Hermann\Downloads\context-mswin\tex\texmf-context\tex\context\test\mkiv startup error : no format file given, quitting ____________________________________________________________________ ConTeXt Compilation Report (Pages: 0) Errors: 0 Warnings: 0 Bad Boxes: 0 Did I something wrong? Uschi

3 8

Cron <context@cgl> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 20 Feb '24

20 Feb '24

rsync: [Receiver] failed to connect to rsync.pragma-ade.nl (213.125.29.165): Connection timed out (110) rsync error: error in socket IO (code 10) at clientserver.c(139) [Receiver=3.2.7]

1 0

lmt_shade fails
by Keith McKay 20 Feb '24

20 Feb '24

Hi all I went to use the lmt_shade function and it fails with two error messages. the first one is: /metafun > log > error: Not a cycle/ followed by lots of trace messages, then: /metafun > log > That contour should have ended with '.. cycle' or '& cycle'. So I'll not change/ /anything just now./ // The MWE I used is as follows: \starttext \startMPpage definecolor [ name = "MyColor3", r = uniformdeviate(1), g = uniformdeviate(1), b = uniformdeviate(1) ] ; definecolor [ name = "MyColor4", r = uniformdeviate(1), g = uniformdeviate(1), b = uniformdeviate(1) ] ; draw lmt_shade [ path = fullsquare scaled 5cm, direction = "up", alternative = "linear", colors = { "red", "green" }, ]; \stopMPpage \stoptext I'm using: /system > ConTeXt ver: 2024.02.14 13:38 LMTX fmt: 2024.2.15 int: english/english/ on a mac mini M1. Any thougths? Best wishes Keith McKay

3 4

Text in Margin
by Jeroen 20 Feb '24

20 Feb '24

In a textbook I am looking to place a large left margin at every page of each chapter. At left printed pages a left margin and at right printed pages a right margin, so like a double sided construction. In this margin I would like to place: 1. Keywords and small descriptions to emphasize some text from the textflow 2. Figures 3. An expansion of a table that is placed in the main textflow but that needs to cover a wider range then the text area so it expands into the margin What is the the easiest way to achieve this? Jeroen

3 2

Re: Text in Margin
by Andres Conrado Montoya 20 Feb '24

20 Feb '24

There is a package on github https://github.com/andythomas/TeX-sidenotes that can help you with that. Check the "context" folder on that repo. Also, you can find an example of its use at https://github.com/zvonkok/perf-panacea Caveat emptor: It has not been updated in 12 years. It should work for the most part, I tried to do something with it a while ago but that project was cancelled. I have not tested it myself but maybe later in the week I can take a look at it. -- Andrés Conrado Montoya Andi Kú andresconrado(a)gmail.com http://sesentaycuatro.com http://messier87.com http://chiquitico.org ---------------------------------------- Los fines no justifican los medios, porque la medida verdadera de nuestro carácter está dada por los medios que estamos dispuestos a utilizar, no por los fines que proclamamos. ---------------------------------------- “You develop an instant global consciousness, a people orientation, an intense dissatisfaction with the state of the world, and a compulsion to do something about it. From out there on the moon, international politics look so petty. You want to grab a politician by the scruff of the neck and drag him a quarter of a million miles out and say, ‘Look at that, you son of a bitch.’” — Apollo 14 astronaut Edgar Mitchell

1 0

Fwd: Re: Working with layer sets with Metapost
by Emanuel Han 19 Feb '24

19 Feb '24

I just made a strange observation in the output pdf of the attached layer_set.tex, which is that when opening it with a pdf viewer like skim or macos preview and showing miniatures, all pages except the last one show page number 1 (the last showing page number 2). Which was not the case with the output pdf of the attached multipage_metapost_mwe-very_simple.tex. How can I change my code to have proper consecutive page numbering in a pdf viewer? > On Feb. 17 2024, at 11:03 am, Emanuel Han via ntg-context <ntg-context(a)ntg.nl> wrote: > I think I could solve all the problems. Attached the finalized working example. I created the https://wiki.contextgarden.net/MetaPost#Layer_sets_as_individual_pages entry with it. Feel free to modify. > > Cheers > Emanuel > > On Feb. 16 2024, at 7:56 am, Mikael Sundqvist <mickep(a)gmail.com> wrote: > Hi, > > not sure I get what you are missing. But you can try > > setbounds currentpicture to (fullsquare scaled 200) ; > > in base. And then do > > \dorecurse{5}{ > \startTEXpage[offset=1DK] > \useMPgraphic{layerset#1} > \stopTEXpage > } > > if that is the looping you are after. > > /Mikael > > On Fri, Feb 16, 2024 at 6:54 AM Emanuel Han via ntg-context > <ntg-context(a)ntg.nl> wrote: > > > > Resp. the solution should be such that each generated PDF page has the same dimension, the same background colour and a page number and the metapost content on each page has the same scaling factor. > > > > On Feb. 15 2024, at 11:10 pm, Emanuel Han via ntg-context <ntg-context(a)ntg.nl> wrote: > > > > Dear Mikael, > > > > I actually need to keep the \dorecurse mechanism of the mwe (from line 44 on), because I need the "setbounds currentpicture to TheFrame" and also because I need page numbering inside the MPpage, as done with draw textext(decimal(currentime)). > > > > So, how can I use the \useMPgraphic{layerset1} etc. inside the \dorecurse, assuming I name my layersets "layerset1", "layerset2", "layerset3" etc.? > > > > Emanuel > > > > On Feb. 15 2024, at 10:07 pm, Emanuel Han via ntg-context <ntg-context(a)ntg.nl> wrote: > > > > Dear Mikael, > > thanks a lot! > > this seems to be the solution! And it looks beatiful enough to me 😄 > > I'll try to port all my layers to this new method and see if I run into new problems again 😅 > > > > Emanuel > > > > > > On Feb. 15 2024, at 8:19 am, Mikael Sundqvist <mickep(a)gmail.com> wrote: > > > > Hi > > > > On Thu, Feb 15, 2024 at 1:03 AM Emanuel Han via ntg-context > > <ntg-context(a)ntg.nl> wrote: > > > > > > Dear list, > > > > > > the attached .tex file is the minimal working example we discussed today in the online meeting. > > > > > > I realized that the approach of looping through k of p[k] is not fitting my needs, because it's not flexible enough. > > > > > > I need another approach, one which works with layer sets. > > > > > > I would stop using p as an array, because with the layer sets approach we don't have a fixed order of the layers. > > > > > > So the definition of the layers would be something like > > > > > > picture layerA; > > > layerA:=image( > > > label("Word 1", z1); > > > ); > > > > > > picture layerW; > > > layerW:=image( > > > label("Mot 2", z2); > > > ); > > > > > > picture layerM; > > > layerM:=image( > > > label("Parola 3", z3); > > > ); > > > > > > picture layerC; > > > layerC:=image( > > > label("Wort 4", z3+z1); > > > ); > > > > > > picture layerY; > > > layerY:=image( > > > label("Nummer 5", z2+z3); > > > ); > > > > > > picture layerU; > > > layerU:=image( > > > label("number 6", z2+z1); > > > ); > > > > > > After that, I would define layer sets and layer subsets. This will be done manually for each layer set and each layer subset. > > > I don't know the proper syntax to do that. Let's assume we could use a variable type called "myset". > > > > > > myset layersubsetGamma; > > > layersubsetGamma:={layerU,layerM}; > > > > > > In my logic, the layers will be drawn in the order of their appearance within the {}. In the example, drawn content of layerM might cover drawn content of layerU. > > > > > > Contrary to a layer subset, each layer set will result in a PDF page, and thus the layer sets are related to each other by an inner order. That's why I would use an array variable here with []. > > > > > > I don't know how to append a set. In the following example, I assumed there would be a function myappend(<initial set>, <the things what the initial set should be appended with>) > > > > > > myset layerset[]; > > > layerset1 := {layerW,layerA}; > > > layerset2 := myappend{layerset1, layerY}; > > > layerset3 := myappend{layerset2, layersubsetGamma}; > > > layerset4 := myappend{layerset2, layerU}; > > > layerset5 := myappend{layerset4, layersubsetGamma}; > > > > > > Finally, I would need each layerset[k] typeset on its own pdf page. And of course on each page k, only the layers which appear in the definition of the layerset[k] should be drawn on top of each other in the order as they appear in that definition. > > > > > > I'm very curious to hear your suggestions. > > > > > > > Not beautiful, perhaps, but maybe something like this could work? I > > think there is no way out of doing some manual work to tell what you > > want included on each page. > > > > \startuseMPgraphic{base} > > z1 = origin ; > > z2 = (10,50) ; > > z3 = (40,30) ; > > > > picture layerA; > > layerA:=image( > > label("Word 1", z1); > > ); > > > > picture layerW; > > layerW:=image( > > label("Mot 2", z2); > > ); > > > > picture layerM; > > layerM:=image( > > label("Parola 3", z3); > > ); > > > > picture layerC; > > layerC:=image( > > label("Wort 4", z3+z1); > > ); > > > > picture layerY; > > layerY:=image( > > label("Nummer 5", z2+z3); > > ); > > > > picture layerU; > > layerU:=image( > > label("number 6", z2+z1); > > ); > > \stopuseMPgraphic > > > > \startuseMPgraphic{Gamma} > > draw layerU ; > > draw layerM ; > > \stopuseMPgraphic > > > > \startuseMPgraphic{layerset1} > > \includeMPgraphic{base} > > draw layerW ; > > draw layerA ; > > \stopuseMPgraphic > > > > \startuseMPgraphic{layerset2} > > \includeMPgraphic{layerset1} ; > > draw layerY ; > > \stopuseMPgraphic > > > > \startuseMPgraphic{layerset3} > > \includeMPgraphic{layerset2} ; > > \includeMPgraphic{Gamma} ; > > \stopuseMPgraphic > > > > > > \startuseMPgraphic{layerset4} > > \includeMPgraphic{layerset2} ; > > draw layerU ; > > \stopuseMPgraphic > > > > \startuseMPgraphic{layerset5} > > \includeMPgraphic{layerset4} ; > > \includeMPgraphic{Gamma} ; > > \stopuseMPgraphic > > > > \starttext > > > > \startTEXpage[offset=1DK] > > \useMPgraphic{layerset1} > > \stopTEXpage > > > > \startTEXpage[offset=1DK] > > \useMPgraphic{layerset2} > > \stopTEXpage > > > > \startTEXpage[offset=1DK] > > \useMPgraphic{layerset3} > > \stopTEXpage > > > > \startTEXpage[offset=1DK] > > \useMPgraphic{layerset4} > > \stopTEXpage > > > > \startTEXpage[offset=1DK] > > \useMPgraphic{layerset5} > > \stopTEXpage > > > > \stoptext > > > > /Mikael > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > > archive : https://github.com/contextgarden/context > > wiki : https://wiki.contextgarden.net > > ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > > archive : https://github.com/contextgarden/context > > wiki : https://wiki.contextgarden.net > > ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > > archive : https://github.com/contextgarden/context > > wiki : https://wiki.contextgarden.net > > ___________________________________________________________________________________ > > > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry to the Wiki! > > > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > > archive : https://github.com/contextgarden/context > > wiki : https://wiki.contextgarden.net > > ___________________________________________________________________________________ > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > archive : https://github.com/contextgarden/context > wiki : https://wiki.contextgarden.net > ___________________________________________________________________________________ > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context(a)ntg.nl / https://mailman.ntg.nl/mailman3/lists/ntg-context.ntg.nl > webpage : https://www.pragma-ade.nl / https://context.aanhet.net (mirror) > archive : https://github.com/contextgarden/context > wiki : https://wiki.contextgarden.net > ___________________________________________________________________________________

2 2

Best way to input UTF-8
by Shiv Shankar Dayal 19 Feb '24

19 Feb '24

Hi all, What is the best way to input UTF-8 in LuaMetaTex? If I use the UTF-8 characters then do not come out in text with Modern font. -- Respect, Shiv Shankar Dayal

3 3

New upload doesn't work on macOS 10.13.6
by Ralf Heinrich Arning 18 Feb '24

18 Feb '24

Hi list, after having tried to update with the new upload, ConTEXt doesn't run anymore. According to the output the new version requires a more recent system. I still use macOS 10.13.6 (High Sierra). This is what I get: ================= context TestCode.tex dyld: lazy symbol binding failed: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/tex/texmf-osx-64/bin/context (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/tex/texmf-osx-64/bin/context (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib /bin/bash: line 2: 1569 Abort trap: 6 context TestCode.tex context TestCode.tex dyld: lazy symbol binding failed: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/tex/texmf-osx-64/bin/context (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/tex/texmf-osx-64/bin/context (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib /bin/bash: line 4: 1579 Abort trap: 6 context TestCode.tex =================== Trying to install again, I get: ==================== sh install.sh dyld: lazy symbol binding failed: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/bin/mtxrun (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib dyld: Symbol not found: ____chkstk_darwin Referenced from: /Applications/TeX/context-osx-64/bin/mtxrun (which was built for Mac OS X 12.7) Expected in: /usr/lib/libSystem.B.dylib install.sh: line 105: 1693 Abort trap: 6 $PWD/bin/mtxrun --script ./bin/mtx-install.lua --update --server="$LMTXSERVER" --instance="$LMTXINSTANCE" --platform="$PLATFORM" --erase --extras="$LMTXEXTRAS" ====================== What can I do? Do I have to reinstall an older version? How can I do this? Desperately, Ralf

3 2

manuals
by Hans Hagen 18 Feb '24

18 Feb '24

There's also: https://github.com/contextgarden/not-so-short-introduction-to-context Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

4 3

Memory consumption in new upload
by Shiv Shankar Dayal 17 Feb '24

17 Feb '24

Thanks for new upload. I see that memory consumption is much less than previous version. So once again, thanks a lot. I am curious about what has changed in recent upload, that memory consumption is about 60% of earlier versions. -- Respect, Shiv Shankar Dayal

2 4