- ntg-context - Mailing Lists

index entries postponed if sections are empty
by Henning Hraban Ramm 02 Nov '20

02 Nov '20

Hi, I‘m despairing about my index – some sections contain only an image (\externalfigure), but I need to set several index entries for the image contents. The index entries get postponed until after the next chapter. I guess the problem is that there’s no (text) content, but \par and \strut didn’t help. The MWE shows that index entries in empty sections are ignored, i.e. “Something” is supposedly only on p.6: \usemodule[visual] \starttext \dorecurse{5}{% \startchapter[title={\recurselevel}] \dorecurse{5}{% \startsection[title={\fakewords{3}{5}}] \index{Something}\index{A\recurselevel} } \stopchapter } \completeindex \stoptext What can I do? Hraban

3 3

context.delayed is incompatible with some functions
by Sylvain Hubert 02 Nov '20

02 Nov '20

Dear List, I was reading Typesetting in Lua using LuaTEX <https://www.ntg.nl/maps/41/11.pdf>. By playing with the examples in the article, I found that `context.chapter(context.delayed("one"))` does not render the delayed text properly, while `context.bf(context.delayed("one"))` does. I would like to ask whether this difference is by design and, if not, whether there is any systematic way of giving delayed arguments to `context.chapter`, where by "systematic way" I'm referring to a proper use of the existing definition of "\chapter" instead of any faked duplication of it that visually resembles a chapter title. Thanks in advance. Best, Sylvain

2 1

Loading modules in Windows
by Jeroen 31 Oct '20

31 Oct '20

Hi, In Context MKIV I always used the gnuplot module. I switched to Context lmtx on MS Windows but seem to have great difficulty loading the Gnuplot module. Any suggestions? Thanks jeroen

3 3

[save] [setmatrix] [restore] and [latelua] messages on terminal
by Aditya Mahajan 30 Oct '20

30 Oct '20

HI, With the recent versions of luamatatex (2020.09.20), in a moderate sized project, I get a multiple messages of on the terminal ........................................... mode = 0 [save] [setmatrix] [save] [setmatrix] [setmatrix] [restore] [restore] [literal]........................................... data = 0 w S 0 g 0 G 0 g 0 G 32.875 67.393234 m 26.511902 72.707367 20.076431 76.811981 13.572296 82.470184 c [etc] ............................................................................................................................... mode = 0 [literal]............................................................................................................................... data = % mps graphic 1: end It seems like metapost to PDF code is being printed to the terminal (not sure about that). I also see messages like: [latelua]..................................................................................... data = function: 0x5585588b4250 [latelua].......................................................................................................... data = table: 0x558557a5ab90floatblocks Any idea what is causing these and how to I disable them. Here is a minimal example for the second message and I can also try to create one for the first: \starttext \startframedtext \startTABLE \NC \input knuth \NC[nr=2] \iftrialtypesetting\else\startplacefigure [location={right,high}, title={Blah blah blah},] \stopplacefigure\fi \NC \NR \NC \input ward \NC \NR \stopTABLE \stopframedtext \stoptext

2 1

Re: [NTG-context] Adding built-in support for Serbian language
by Ivan Pešić 30 Oct '20

30 Oct '20

Дана 30.10.2020. у 16:42, Mojca Miklavec пише: > Would you be willing to also prepare the latin one then? > The codes should be sorted out by Hans (potentially with some help), > but we definitely want to use "sr-latn" and "sr-cyrl". Here is the lang-txt.lua diff with labels transliterated from serbian cyrillic to latin script. Other files basically do not differ, only codes should be sorted out. Language definition stays the same. Regards, Ivan

1 0

Re: [NTG-context] Adding built-in support for Serbian language
by Ivan Pešić 30 Oct '20

30 Oct '20

Dear Mojca, Дана 30.10.2020. у 19:10, Mojca Miklavec пише: > Would you be willing to also prepare the latin one then? > The codes should be sorted out by Hans (potentially with some help), > but we definitely want to use "sr-latn" and "sr-cyrl". Sure, I will tomorrow create a transliteration to latin script and post diffs here. What you propose is in fact already used in some other places, I agree with you. > For the longer names there is some more freedom. LaTeX uses "serbianl" > and "serbianc", I think, but I believe we can come up with something > nicer. > Maybe something along the lines of the following? > \mainlanguage[serbian][script=latn] > or > \mainlanguage[serbian-latin] > \mainlanguage[serbian-cyrillic] > No clue, really. > > Thank you, > Mojca > > (PS: I would say that adding support for transliteration of the text > from one script to the other would be a really nice feature. Then you > could type your text for a book once and have it typeset in both > versions without any extra effort :) As for transliteration, cyrillic to latin is one-to-one, straightforward with no exceptions. A simple table lookup is enough. Going from latin to cyrillic, there are some exceptions, but we could solve that. I can provide Hans with all that is needed. Ivan

2 1

troubles with \enablemode
by Damien Thiriet 30 Oct '20

30 Oct '20

Hi @list, I don't fully understand the \enablemode mechanism. Given this MWE: \startmode[test] \setupframedtext [foregroundcolor=white,style={\tfa}] \stopmode \starttext \startframedtext ceci est un texte \stopframedtext \enablemode [test] \startframedtext ceci est un texte \stopframedtext \stoptext I cannot see the expected effect when I compile, that is both texts are in black. When I compile with context --mode=test both framed texts are in white, which is what I expect. What did I miss? Best regards, Damien Thiriet

3 2

Asymmetrical Column layout leads to an extra blank page
by Ramkumar KB 30 Oct '20

30 Oct '20

Hello All, I am new to this community and am really excited about the possibilities with ConTeXt. My question is related to the thread - https://www.mail-archive.com/ntg-context@ntg.nl/msg92767.html (the suggested solution did not work, unfortunately) After trying out various options, I am faced with these 2 (sub-optimal) choices - 1. Extra Blank page with Asymmetric Columns in the next page (with the \subject{} uncommented) 2. No Blank page with Symmetric Columns (with the \subject{} commented) 3. page=yes / no - does not work (same outcome as above) I am not sure the role of \section or \subject in this matter (seems to be somehow interfering with asymmetrical columnset). \usemodule[newcolumnsets] ... % \subject{} \definecolumnset[soi1][n=3, distance=3mm, page=yes] % \definecolumnset[currency][n=3, page=yes] \setupcolumnset[soi1:1][width=.25\makeupwidth] \setupcolumnset[soi1:2][width=.30\makeupwidth] \setupcolumnset[soi1:3][width=.45\makeupwidth] Any tips, help or pointers would be greatly appreciated. If not for columnset, is there any other way to get this type of layout? Thank you,

1 1

Line numbering skips lines
by Felix Krause 30 Oct '20

30 Oct '20

Hi all, in a typing environment, I have the problem that not every line is numbered: \definetyping [code] [numbering=line, escape={@[,@]}] \setupcolors[state=start] \definecolor[nonsigpart][r=.7,g=.7,b=.7] \defineframed[nonsig] [location=low,frame=off,background=color,backgroundcolor=nonsigpart] \starttext \startcode lorem ipsum @[ @] @[foo@] @[\nonsig{bar}@] dolor sit amet \stopcode \stoptext This will number * the first and last lines, containing normal text * the third line containing nothing at all * the forth line containing `foo` inside an escape sequence It will skip * the second line containing a space character inside an escape sequence * the fifth line which produces text with a gray background Why does it skip those lines? This seems really strange as a completely empty line does get numbered. How can I number every line? Regards, Felix

1 0

Adding built-in support for Serbian language
by Ivan Pešić 30 Oct '20

30 Oct '20

Appologies, I have forgot to attach the file :$ Here is it. Ivan

1 0