- ntg-context - Mailing Lists

LMTX bug? \completelistofabbreviations
by Bert Verbeek 12 Feb '21

12 Feb '21

Hello all, I've used ConTeXt MkIV for years to make technical reports. For a new computer I looked for updates of the software and discovered LMTX. I ran it on my latest report and found an error on \completelistofabbreviations, both on win-64 and linux. Context --luatex worked fine. A minimal file based on the wiki examples produced the same error on \completelistoftests: \definesynonyms[test][tests][\infull] \setupsynonyms[test][criterium=all] \test{ITU}{International Telecommunication Union} \test{MID}{Maritime Identification Digit} \test{Ch}{Switzerland} \starttext The \ITU\ is an organisation in \infull{Ch} % \subject{Short is nice} % \placelistoftests \completelistoftests \stoptext Did something change, or did I find a bug? Bert

2 2

issue printing with Acrobat?
by Pablo Rodriguez 12 Feb '21

12 Feb '21

Dear list, I have the following sample: \setuppapersize[A4, landscape] \setupinteractionscreen[option={landscape, paper}] \starttext \dorecurse{2} {\startmakeup[page][pagestate=start, align=middle] \dontleavehmode \scale[width=.8\textwidth]{middle} \stopmakeup} \stoptext Selecting paper in option from \setupinteractionscreen also sets (printing) orientation to auto. I couldn’t print the resulting PDF generated from the code above without having to set orientation to landscape (in Acrobat’s printing dialog). Otherwise, I was getting wrong orientation in printed pages. Printing was wrong in both printers I tried. Acrobat DC (reader) version is Acrobat DC (2021.001.20135). I was using both MkIV and latest LMTX. I think there might be a bug in latest Acrobat. Could anyone confirm whether the latest Acrobat DC is able to print the PDF document from the code above with the printing orientation set to automatic? -- http://www.ousia.tk

1 0

Table of Content
by Ursula Hermann 12 Feb '21

12 Feb '21

Dear List! I did this example, which works perfect. If i would like to take a new page after the Table of Content, is \page the right way? % mode=mkiv \setuppapersize[A7][A7] \language[de] %list the "subject" sections in the ToC but don't modify the "section" counter: \setuphead[subject] [incrementnumber=list] %"width": distance between number and text in the ToC entry, "margin" : indent of ToC entry relative to left page margin \setuplist[section][width=1.5em] \setuplist[subsection][width=2.5em, margin=1.5em] \setuplist[subject] \setuplist[subject, section, subsection] \setupcombinedlist[content][list={subject,section,subsection}, alternative=c] \starttext \placecontent \setupuserpagenumber[numberconversion=romannumerals] \setcounter[userpage][5] \page \subject{Vorwort} \page \setupuserpagenumber[numberconversion=numbers] \setcounter[userpage][12] \section{One} \subsection{Sec A} \section{Two} \subject{Bibliography} \stoptext Uschi

2 1

vertical offset with "i" in position-command
by Peter Münster 12 Feb '21

12 Feb '21

Hi, When I want to type an "i" in the position-command, there is some vertical offset: \starttext \startpositioning \position(1, 1){i} \position(2, 1){x} \position(1, 2){x} \position(2, 2){i} \position(1, 3){a} \position(2, 3){x} \position(1, 4){x} \position(2, 4){a} \stoppositioning \stoptext Why is it so, and how could I avoid that please? TIA for any hints, -- Peter

2 2

[passing parameter into MPpage]
by Floris van Manen 12 Feb '21

12 Feb '21

What is the correct ways to pass parameters into a \startMPpage section? This does not produce a page (obviously if you know how it works) But how to get the intende output? \def\blz[#1][#2][#3]{ \startMPpage draw thefmttext(#1) shifted(10mm, 20mm); draw thefmttext(#2) shifted(10mm, 205m); draw thefmttext(#3) shifted(10mm, 30mm); \stopMPpage } \blz[01][02][AA] \blz[03][42][ZZ]

2 1

Metapost: directionpoint gives unexpected point(?)
by Mikael Sundqvist 12 Feb '21

12 Feb '21

Hi, I get sometimes the wrong directionpoint. In the example below it works for all values of direx except between 0 and 90. If I put direx to something in this interval, it seems that the point between cs and cl are chosen. Is there a better way to construct the paths not to get this problem? Or some other way out? /Mikael \starttext \startMPpage[offset=3bp] u:=1cm; path cl,cs,rl,p[]; z0 = (0,6/sqrt(3)*u); z1 = z0 rotated 120; cs := (fullcircle scaled 16u) shifted z1; cs := cs cutafter point 1/6 along cs; cl := (fullcircle scaled 4u) shifted z0; cl := cl cutbefore point 1/6 along cl cutafter point 2/6 along cl; p[0] = cs .. cl .. (cs rotated 120) .. (cl rotated 120) .. (cs rotated 240) .. (cl rotated 240) .. cycle; draw p[0]; drawarrow cs withcolor darkblue; drawarrow cl withcolor darkred; direx=300; z11=directionpoint dir(direx) of p[0]; drawarrow ((-u,0)--(u,0)) rotated direx shifted z11; \stopMPpage \stoptext

3 9

Twenty One versus Twenty-one
by jbf 11 Feb '21

11 Feb '21

Am currently dealing with a book that has twenty-one chapters, and the author (who is visually impaired) follows a range of visually impaired principles when writing and wanting things published. That's the background to my question! MWE \setuphead[chapter][ header=empty, alternative=middle, style={\ssd}, number=yes, conversion=Word, command=\MyChapterCommand, after={\blank[1cm]}, ] Problem is, when we get to chapter Twenty-one (which is the correct way to write it in English) it gives me 'Twenty One'. Is there a way, in my setup, that I can force it to give me 'Twenty-one'? (note the hyphen and the lower case for 'one'). I don't think MyChapterCommand is relevant here, but just in case, this is it: \define[2]\MyChapterCommand% {\framed[frame=on,bottomframe=on,leftframe=off,rightframe=off,topframe=off,align=middle] {\vbox{\headtext{chapter} #1\blank#2}}} Julian

2 6

Centered list of authors in ToC
by jbf 09 Feb '21

09 Feb '21

I wonder if someone can assist me with the final step in a complicated Table of Contents where all items in the ToC are centred (except page numbers which continue to be on the right). Beneath each chapter title is a list of authors (Yes, there can be up to four authors per chapter!) I can successfully achieve everything (see MWE below) except for getting the list of authors to split and be centred. Because there are four of them, I would need to split them so they appear as two (centred) with the other two below(also centred). Here is my MWE for the essential bit (which is then called in as textcommand=\SectionTocEntry in \setuplist[chapter], obviously): \define[1]\SectionTocEntry{% #1\crlf% title \midaligned{\doifnot{\structurelistuservariable{author}}{}{\structurelistuservariable{author}}}% } My problem is that at the moment, the four authors appear on a single line, so I end up with: My chapter title Mickey Mouse, Donald Duck, Uncle Scrooge, Minnie Mouse [p. 1, but in fact, Minnie Mouse runs across the page number!] What I want instead is: My chapter title Mickey Mouse, Donald Duck Uncle Scrooge, Minnie Mouse [p. number] Back at the chapter level my code reads: \startchapter[title={Chapter title}][author={Mickey Mouse, Donald Duck, Uncle Scrooge, Minnie Mouse}]. Anyone able to help with this? Julian

3 5

Re: [NTG-context] TEXpage breaks \setupinteractionscreen in LMTX
by Pablo Rodriguez 09 Feb '21

09 Feb '21

On 2/8/21 11:01 PM, Hans Hagen wrote: >> [...] >> LMTX doesn’t include full page. MkIV compiles it fine. >> >> If I remove the TEXpage, LMTX includes the full page mode. > LMTX is more accurate as \null has zero dimensions an dit's a fitting page > > what you want is > > \startpagemakeup > > \stoppagemakeup Sorry, Hans, the original sample was different, but I removed the offset option in order to make it smaller: \setupinteractionscreen[option=max] \starttext \startTEXpage[offset=1em] \ConTeXt \stopTEXpage \stoptext I hope it is clearer now, Pablo -- http://www.ousia.tk

2 2

latest LMTX breaks XML compilation
by Pablo Rodriguez 08 Feb '21

08 Feb '21

Hans, using latest from (2021.02.08 17:03) with all my XML sources breaks compilation with the following error: > tex error on line 2 in file : Argument of \xmlw has an extra } How I can detect when ConTeXt uses \xmlw? Latest from 2021.02.08 17:03 doesn’t have this problem. Many thanks for your help, Pablo -- http://www.ousia.tk

2 1