- ntg-context - Mailing Lists

Stack size for arguments too small in LMTX
by Henri Menke 25 May '21

25 May '21

Dear list, For some reason pgfplots has a \pgfkeys invocation where the argument has more than 4000 lines. This crashes LuaMetaTeX with the message tex error > tex error on line 4045 in file pgfplots.code.tex: TeX capacity exceeded, sorry [token memory size=1000000] It doesn't seem to be an issue with LuaTeX, so my guess is that token memory size is larger in LuaTeX. Could you please increase the stack size to make this edge case compile again? This issue was originally reported on the pgfplots bugtracker: https://github.com/pgf-tikz/pgfplots/issues/398 Cheers, Henri

2 1

lmtx and defined placeinitial color
by jbf 25 May '21

25 May '21

If I run the following in lmtx, the defined color is not recognized and I get black instead. If I run it as mkiv with --luatex, I get the darkgray I defined. Is there something else I need to do for lmtx? \definecolor[darkgray][s=.4] \setupinitial[color=darkgray,font=adellesemibold at 46pt,distance=3pt,n=3] \starttext \placeinitial{M}{\sc aking sense of the world} at any time is a fraught exercise... \stoptext Julian

2 1

contextgarden.net seems to be down
by Vladimir Lomov 25 May '21

25 May '21

Hello. According to page https://wiki.contextgarden.net/ConTeXt_Standalone to install ConTeXt standalone (I assume MkIV) one has to download first-setup.sh script (Linux,Mac,*BSD) from contextgarden.net (minimals.contextgarden.net) but this host seems to be down. On linux I have $ host contextgarden.net contextgarden.net has address 193.2.4.200 contextgarden.net has IPv6 address 2001:1470:ff80:88::80:c contextgarden.net mail is handled by 10 mail.ijs.si. $ host minimals.contextgarden.net minimals.contextgarden.net is an alias for server-si.contextgarden.net. server-si.contextgarden.net has address 193.2.4.200 server-si.contextgarden.net has IPv6 address 2001:1470:ff80:88::80:c $ ping -c 3 contextgarden.net PING contextgarden.net(context.ijs.si (2001:1470:ff80:88::80:c)) 56 data bytes From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=1 Destination unreachable: Address unreachable From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=2 Destination unreachable: Address unreachable From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=3 Destination unreachable: Address unreachable --- contextgarden.net ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2073ms $ ping -c 3 minimals.contextgarden.net PING minimals.contextgarden.net(context.ijs.si (2001:1470:ff80:88::80:c)) 56 data bytes From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=1 Destination unreachable: Address unreachable From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=2 Destination unreachable: Address unreachable From cmigw.ijs.si (2001:1470:ff80:1::1:26) icmp_seq=3 Destination unreachable: Address unreachable --- minimals.contextgarden.net ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2014ms P.S. Nowadays I use mostly lmtx but I keep MkIV in case of troubles with lmtx. --- Vladimir Lomov -- It is better to wear out than to rust out.

2 2

specify a directory for tex files
by Jeroen 25 May '21

25 May '21

similar to this for figures \setupexternalfigures [directory={./myfigures}] is there a way to specify a directory for tex files so with \input{myfile.tex} the file myfile.tex can be placed in a subdirectory for example ./mytexfiles?

3 4

Define new symbol by stitching two symbols together
by Nicola 24 May '21

24 May '21

I would like to define new symbols by stitching together existing glyphs. This is what I have come up so far: \define[1]\Transition{-\!\![#1]\!\!\rightarrow} \starttext \m{L\Transition{A}R} \stoptext This should render as -[ ]->, ideally with no space between the dash or the arrow and the brackets, i.e., -[ should appear like a single glyph; ditto for ]-->. With the definition above, however, the space is variable, and in some circumstances the gliphs overlap. How can I improve the above definition? Nicola

3 3

Special layouts don't recognise placeinitial
by Eduardo Bohoyo 24 May '21

24 May '21

My question will be very simple: Is there a trick to make \placeinitial command work within makeup pages? One of my pages inside the /frontmater/ is a quote page within an special layout. Before using LMTX, when I could use the Lettrine module, that quote started with a capital letter. But now that I use \placeinitial, the first letter no longer changes: it remains a simple initial capital letter. On the other hand, when I use \placeinitial for each first paragraph in the chapters of my book, the result is as expected. That is, the command works fine as long as it stays within the general layout. This is the code I'm referring to: \startmakeup[standard][doublesided=yes] \setuplayout[backspace=176pt,width=194pt] \setupinterlinespace[line=22pt] \style[tfa] \startalignment[hanging,flushleft,nothyphenated] \placeinitial Ahora, vosotros que amáis, dejadme que os formule una pregunta: ¿quién sufre más por ello, Arcite o Palamón? ¿El que ve a su dama diariamente, pero está encerrado para siempre, o el que es libre de ir donde le plazca, pero no verá nunca más a su dama? Aquellos de vosotros que podáis, elegid entre las dos situaciones a voluntad; yo, por mi parte, continuaré como he empezado. \stopalignment \startalignment[hanging,flushright,nothyphenated] \blank[0.8cm,force]{\tfa\sc Geofrey Chaucer,\hspace[big]} \blank[0.1cm,force]{\tfa\em The Canterbury Tales \hspace[big]} \stopalignment \stopmakeup Eduardo Bohoyo

2 4

LMTX install
by jbf 24 May '21

24 May '21

Someone will quickly clarify what I am doing wrong here. Have used mkiv until now but decided to download and install LMTX in /home/me/bin/context. I then ran export PATH=/home/me/bin/context/tex/texmf-linux-64/bin:$PATH as the install script indicated at the end. When running mk iv, I always first ran a setup line (in my case it was . /home/me/Documents/Freedom/Context/tex/setuptex). Do I need to run a setup also for LMTX installed as above? And what one, because there is no 'setuptex' as far as I can see. If I just run context myfile.tex I get the mtxrun | unknown script 'context.lua' or 'mtx-context.lua' message. Does this mean my 'path' command didn't work (and why not? It should have) or do I still need to run a setup before I try to compile? Julian

7 10

mathfun
by Hans Hagen 23 May '21

23 May '21

Hi, I uploaded an lmtx update (only m-mathfun added). Attached a short description of this (windy stormy friday afternoon) math experiment. The question is, what similar features using this trickery come to mind. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

5 14

Unwanted upright math in MkIV
by Gavin 23 May '21

23 May '21

Hello, I’m using ConTeXt with MacOS. The current version of MkIV produces upright math rather than italic. MWE: \starttext \m{f = \beta} \stoptext The above example produces italic math TeXLive 2021 ConTeXt and in the current, LMTX. Looks like a bug to me, but maybe I am doing something wrong. I am running ConTeXt from TexShop using this engine: #!/bin/zsh export PATH=/Users/Gavin/context-osx-64/tex/texmf-osx-64/bin:$PATH ~/context-osx-64/tex/texmf-osx-64/bin/context --luatex --autopdf "$1” Thanks! Gavin

2 1

One chapter with different heading settings
by Jeroen 23 May '21

23 May '21

In the preamble I have the following setup for the chapter header setup. There is one chapter I want to have a different heading setup with some less spacing, what would be the easiest way to achieve this? \setuphead [section] [style=bold, before={\vskip 4mm}, after={\vskip 1.5mm}]

2 1