- ntg-context - Mailing Lists

Re: [NTG-context] Run ConTeXt from TexLive 7 CDROM and
by fa441907 13 May '03

13 May '03

I wrote >>To run Context, I made a WinShell User Defined Tool, as >>follows. In Options => General => Userdefined I did >> >> ... exefile = pdfetex >> ... cmd line = &cont-en Hans Hagen replied >maybe you need to change the pdfetex in texexec here, or better > > exefile = texexec > cmfline = --pdf --int=en > >given that you want to force the english interface, When I run the above (Win98, TeXLive 7) the WinShell reporting window says "TeXExec 2.8 ConTeX ... and WinShell then hangs, only closes on ctl alt del If I add "%s.tex" so the tool cmd-Line reads ... exe-File=texexec ... cmd-Line= --pdf --int=en %s.tex I get "There is no Main-TeX-Document! Please check the options!" I tried to learn from WinShell's own tool (F5) Which runs LaTeX out of the box. But a clone of that tool ... exe-File=latex ... cmd-Line=%s.tex Also gives "There is no Main-TeX-Document! Please check the options!" Conclusion - Looks like I dont understand WinShell either (I've cross posted the above to the WinShell bulletin board) Richard Hardwick

1 0

Re: [NTG-context] EC-Fonts
by Wolfgang Werners-Lucchini 13 May '03

13 May '03

Hi, >> \usetypescript[aer] (top of file) >> > > I have not tested this, but if it does what it sounds like, it switchtes > to cmr in an ec-like encoding, not to the ec-fonts by Jörg Knappen. You are right! No ec-fonts, just cm. Wolfgang

1 0

ligatures?
by Adam Lindsay 13 May '03

13 May '03

TeXnicians, Once again, I'll stick my neck out showing my pure TeX ignorance. Are there ConTeXt commands for adding ligatures to the usual set (ff, fi, etc.)? Where in the chain are these characters (f + i) grouped and associated with the 'fi' character to be output? I'd like to be able to take advantage of some extended ligatures with my pro fonts, but it seems that if users have to enter the ligatures as \Thligature or whatever, they would be of very limited use. thanks in advance, adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay atl(a)comp.lancs.ac.uk Computing Dept, Lancaster University +44(0)1524/594.537 Lancaster, LA1 4YR, UK Fax:+44(0)1524/593.608 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

5 11

Run ConTeXt from TexLive 7 CDROM and WinShell
by fa441907 12 May '03

12 May '03

Thank you to Maarten Sneep and Severin Obertuefer for help with my "Newbie cant get \externalfigure to work" It seems likely that problem arose because of some coding errors and also because I am using an old (1999) version of ConTeXt (part of 4TeX5.0 (NL Tug)). So I am trying to upgrade. I am now trying to run ConTeXt from TexLive 7 CDROM, TexLive says ... "Select a Tex-oriented editor" I chose WinShell To run Context, I made a WinShell User Defined Tool, as follows. In Options => General => Userdefined I did ... exefile = pdfetex ... cmd line = &cont-en When I run that tool I get One or more errors occurred! Please check the options! Now I am stuck again Your suggestions gratefully received Richard Hardwick

2 1

BUG in latest ConTeXt beta?
by Giuseppe Bilotta 10 May '03

10 May '03

Hello, I just downloaded the latest ConTeXt beta (2003.4.29), and I spotted a bug in lang-grk: the headtexts are defined for s!fi, not for s!gr (also, the package subtitles reads "Uralic" instead of "Greek" languages) ... -- Giuseppe "Oblomov" Bilotta

1 0

some questions on fonts
by Pablo Rodriguez 09 May '03

09 May '03

Dear ConTeXticians, I'm learning to use ConTeXt and the main problems I have with ConTeXt are related to fonts. I need to use utf-8 for my documents, since it is the proper way to handle polytonic Greek, Spanish and German in a single document without having to use strange input methods. I was told that it is possible to use utf-8 in ConTeXt (although Greek isn't defined for utf-8 yet), but I don't know how to enable this feature. Which command can I use utf-8 in my documents? (I know \enableregime, but it doesn't work with option unicode). Another problem is the fontencoding: I'd like to use the cm-super fonts, but if I try to use \setupencoding[default=ec] I get a recursive error with some documents (but this is probably due to the wrong document syntax) or the document fonts are the standard cm fonts in OT1 encoding, what is probably related to the last problem. I cannot invoke other fonts than \setupbodyfont[ber,pos]. I use the MikTeX total distribution and with pdfLaTeX all installed fonts work fine. With ConTeXt if I use \setupbodyfont[palatino], either I get an error from maketfm that doesn't know how to make ec-uplr8a or in other documents the variant palatino for bodyfont seems to be unknown. I'm extremely confused about how ConTeXt works with the installed fonts (probably I don't have the required knowledge to understand it) and actually I don't know how LaTeX mangages the available fonts, but it works. The above question is not how to install new fonts or even how ConTeXt manages fonts. The only thing I'd appreciate to know is the most simple procedure to invoke each installed font on my TeX distribution within ConTeXt. Many thanks for your help, Pablo

3 2

Magazine: OpenType Pro fonts in ConTeXt
by Adam Lindsay 09 May '03

09 May '03

Hi ConTeXters. I've finally documented some font support macros and typescripts that I've been working on. I collected the ideas in a MyWay magazine: <http://homepage.mac.com/atl/tex/OpenType.pdf> (782 Kb) The companion files are on the site as well: <http://homepage.mac.com/atl/tex/OpenType.zip> (25 Kb) A web page to hold all this stuff is forthcoming. The best way to describe what it does is with the abstract: This is a summary of issues encountered and solutions implemented in order to support some advanced OpenType features in ConTeXt. This article describes an accompanying package that addresses installation (using TeXFont), accommodating extended opticals families, and some ``pro'' font features. The extended character set afforded by pro fonts enables support for comprehensive small caps, old-style figures, and the use of greek glyphs to give workable math fonts. Although the typescripts and commands are described together, certain features (like variant encodings for TeXFont and the idiosyncratic method for creating new math fonts) can be used independently of the other features described. I hope this proves interesting, if not useful, to others. Cheers, adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay atl(a)comp.lancs.ac.uk Computing Dept, Lancaster University +44(0)1524/594.537 Lancaster, LA1 4YR, UK Fax:+44(0)1524/593.608 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

4 3

Re: [NTG-context] Inclusion of flow chart
by emmanuel.rialland＠sgib.com 09 May '03

09 May '03

Thanks to all. That gives me some leads. I wanted to try something using your advice but in the mean-time decided to typeset my document in lucida instead of comp modern. My installation just won't do it. So I am struggling on this and leave the graphs to later. Emmanuel "Willi Egger" <w.egger(a)boede.nl To: <ntg-context(a)ntg.nl> > cc: Sent by: Subject: Re: [NTG-context] Inclusion of flow chart ntg-context-admin @ntg.nl 07/05/2003 18:42 Please respond to ntg-context > At 11:17 07/05/2003 +1100, you wrote: > > >Hi all, > > > >I have definitely not been flooded by answers. I am getting the impression > >that this forum might > >not have been the best one to ask (i.e. I have a practical problem which > >has little bearing with > >implementation aspects / bugs / new features of Context). > > hm, normally questions get answered (willy often does the flow chart ones, > but he may be off for a few days; begin may are also problematic days: many > holidays, national thingies and so; personally i'm just back from the > polish tex conference) > > i forwarded the mail to willy -) > > the best hack i can come up with is: > > % output=pdftex > > \usemodule[chart] > > \starttext > > \startFLOWchart[boxes] > \startFLOWcell > \name {a} > \location {1,1} > \shape {action} > \text {\ss A} > \stopFLOWcell > > \startFLOWcell > \name {b} > \location {2,1} > \shape {action} > \text {\ss B} > \stopFLOWcell > > \startFLOWcell > \name {c} > \location {3,1} > \shape {action} > \text {\ss C} > \stopFLOWcell > \stopFLOWchart > > \FLOWchart[boxes] > > \startFLOWchart[arrows] > \includeFLOWchart[boxes] > \startFLOWcell > \name {1-2} > \location {1,1} > \shape {none} > \connection[rl]{b} > \stopFLOWcell > \startFLOWcell > \name {2-3} > \location {2,1} > \shape {none} > \connection[rl]{c} > \stopFLOWcell > \stopFLOWchart > > \FLOWchart[arrows] > > \stoptext > > when i have time i'll think about some extension That is what I meant with my other reply. - I feel however that this is not quite what Emmanuel is looking for. I stand corrected, the idea is to have a basket with shapes and another basket with arrows. Pick on the fly the necessary pieces and assemble them in a chart, place the chart in a figure environment and put a numberd legenda underneath of it. -- Hm, I would not know how to achieve this without tweaking the sources... Willi _______________________________________________ ntg-context mailing list ntg-context(a)ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context ************************************************************************** Have you checked our new corporate website at http://www.sgib.com ? The information contained herein is confidential and is intended solely for the addressee(s). It shall not be construed as a recommendation to buy or sell any security. Any unauthorized access, use, reproduction, disclosure or dissemination is prohibited. Neither SGIB nor any of its subsidiaries or affiliates shall assume any legal liability or responsibility for any incorrect, misleading or altered information contained herein. **************************************************************************

2 1

Newbie cant get \externalfigure to work
by fa441907 09 May '03

09 May '03

Newbie cant get \externalfigure to work Just starting with Context I'm using 4TEX 5.0 (ver June 1999) I want to make a pdf document with some pictures In LaTex, this (postscript) works; \documentclass[a4paper]{article} \usepackage[dvips]{graphicx} \begin{document} \frame{% \includegraphics{DSCN0043.eps} }% Some text \end{document} I try the same thing in Context and I get an empty box with 3 lines of text "name: dummy" "file: DSN0043" "unknown" Heres my script: \setupoutput[pdftex] \useexternalfigure [appleblossom][DSCN0043] [type=eps,width=.4\makeupwidth] \starttext \startfiguretext [left] [fig:appleblossom] {none} {\externalfigure [DSCN0043] [type=eps,width=.4\makeupwidth,frame=on]} Some text \stopfiguretext \stoptext log file says ConTeXt ver: 1999.5.11 fmt: 1999.6.4 int: english mes: english ...snip... systems : begin file 2Context at line 23 figures : figure DSCN0043 can not be found Thank you for your help Richard Hardwick

3 2

inverted (french) quotation marks for german documents
by schwertner＠t-online.de 09 May '03

09 May '03

Hello, I'm starting with Context and have the following question. I want to achieve the inverted (french) quotation marks for german documents. For example: >>househusband<< With latex or pdflatex I use ">househusband"< or \frqq househusband\flqq but this doesn't work in Context. Many thanks for any help, Helmut ********************************************************* Helmut Schwertner eMail: schwertner(a)t-online.de

3 2