- ntg-context - Mailing Lists

RE: Welcome to the "ntg-context" mailing list (Digest mode)
by Mark Ainsworth 26 Jun '03

26 Jun '03

Sorry if this is answered in a manual somewhere, but I can't seem to find it. Yes I have tried looking in ALL the docs, but can't seem to find anything that helps. I am looking to switch macro package from Latex to Context. Up until now I have used the \usepackage{palatino} to get all pdf files generated using Palatino. This has been working fine. However if I switch to Context and try \showbodyfont[ppl] I get: This is pdfeTeX, Version 3.14159-1.00b-pretest-20020211-2.1 (Web2c 7.3.7x) (format=cont-en 2003.6.25) 26 JUN 2003 09:16 entering extended mode **&cont-en test.tex (./test.tex{c:/Local/TeX/texmf-var/pdftex/config/pdftex.cfg} ConTeXt ver: 2002.5.20 fmt: 2003.6.25 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (c:/Local/TeX/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! ) system : cont-old loaded (c:/Local/TeX/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (c:/Local/TeX/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) bodyfont : 12pt rm is loaded language : patterns 2:2-en-2 3:2-uk-2 4:2-de-2 5:2-fr-2 6:2-es-2 7:2-it-2 8:2-nl-2 loaded specials : tex,postscript,rokicki loaded \openout2 = `test.tui'. system : test.top loaded (./test.top) \openout0 = `mpgraph.mp'. \openout0 = `mprun.mp'. \openout0 = `mpgraph.mp'. \openout0 = `mprun.mp'. pdftex : needs map file: original-context-symbol.map pdftex : needs map file: pl0-ams-cmr.map pdftex : needs map file: original-vogel-symbol.map (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) systems : begin file test at line 1 (c:/Local/TeX/texmf/tex/context/base/font-run.tex) (c:/Local/TeX/texmf/tex/context/base/type-pre.tex typescript : [serif] [palatino] [name,ec] (c:/Local/TeX/texmf/tex/context/base/type-syn.tex) (c:/Local/TeX/texmf/tex/context/base/type-enc.tex) (c:/Local/TeX/texmf/tex/context/base/type-siz.tex) (c:/Local/TeX/texmf/tex/context/base/type-map.tex) (c:/Local/TeX/texmf/tex/context/base/type-spe.tex) (c:/Local/TeX/texmf/tex/context/base/type-exa.tex) typescript : [serif] [default] [size] (c:/Local/TeX/texmf/tex/context/base/type-syn.tex) (c:/Local/TeX/texmf/tex/context/base/type-enc.tex) (c:/Local/TeX/texmf/tex/context/base/type-siz.tex) (c:/Local/TeX/texmf/tex/context/base/type-map.tex) (c:/Local/TeX/texmf/tex/context/base/type-spe.tex) (c:/Local/TeX/texmf/tex/context/base/type-exa.tex) typescript : [map] [ec] [] (c:/Local/TeX/texmf/tex/context/base/type-syn.tex) (c:/Local/TeX/texmf/tex/context/base/type-enc.tex) (c:/Local/TeX/texmf/tex/context/base/type-siz.tex) (c:/Local/TeX/texmf/tex/context/base/type-map.tex pdftex : needs map file: original-ams-cmr.map pdftex : needs map file: original-ams-euler.map pdftex : needs map file: ec-adobe-utopia.map pdftex : needs map file: ec-bit-charter.map pdftex : needs map file: ec-public-antp.map pdftex : needs map file: ec-public-antt.map pdftex : needs map file: ec-urw-bookman.map pdftex : needs map file: ec-urw-courier.map pdftex : needs map file: ec-urw-helvetica.map pdftex : needs map file: ec-urw-palatino.map pdftex : needs map file: ec-urw-times.map pdftex : needs map file: ec-urw-zapfchan.map pdftex : needs map file: original-youngryu-px.map pdftex : needs map file: original-youngryu-tx.map pdftex : needs map file: ec-bh-lucida.map ) (c:/Local/TeX/texmf/tex/context/base/type-spe.tex) (c:/Local/TeX/texmf/tex/context/base/type-exa.tex)) ! Font \*12ptrmtf*=ec-uplr8a at 12.0pt not loadable: Metric (TFM) file not foun d. \lastfontname ->ec-uplr8a at \scaledfont \donoparsefontspec ... #1\endcsname \lastfontname \relax \relax \xxdododefinefont ...tspec {#2}\newfontidentifier \doresetrelativefontsize \... \fontstrategy ...ame #1\csname #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \ifskipfontchar... ... l.2 \showbodyfont[ppl] ? x Here is how much of TeX's memory you used: 383 strings out of 34853 6941 string characters out of 773612 373659 words of memory out of 1500001 28899 multiletter control sequences out of 10000+50000 9049 words of font info for 28 fonts, out of 200000 for 1000 64 hyphenation exceptions out of 1000 48i,1n,55p,250b,603s stack positions out of 5000i,500n,5000p,200000b,40000s 0 PDF objects out of 256000 0 named destinations out of 131072 0 words of extra memory for PDF output out of 65536 No pages of output. I am using the latest (non-beta) fptex installation on win32 and have installed just about everything, including all the URW fonts. So what am I still missing? if I run tex testfont on the pplr8r etc fonts then I get correct test pdf files. Any help would be appreciated, apart from read the manual. I've tried that can can't find the solution to my problems. I'm by no means a tex expert. Many thanks. begin 600 Mark Ainsworth.vcf M0D5'24XZ5D-!4D0-"E9%4E-)3TXZ,BXQ#0I..D%I;G-W;W)T:#M-87)K#0I& M3CI-87)K($%I;G-W;W)T:`T*3U)'.E-U;F1A;F-E($UU;'1I<')O8V5S<V]R M(%1E8VAN;VQO9WD@3'1D+@T*5$E43$4Z475A;&ET>2!-86YA9V5R#0I.3U1% M.T5.0T]$24Y'/5%53U1%1"U04DE.5$%"3$4Z/3!$/3!!#0I414P[5T]22SM6 M3TE#13HK-#0(a)*#$T.30I(#<Y,R`Q-C<-"E1%3#M(3TU%.U9/24-%.BLT-"`H M,30W-BD@-#`U(#<P,0T*5$5,.U=/4DL[1D%8.BLT-"`H,30Y-"D@-SDS(#$V M.`T*5$5,.TA/344[1D%8.BLT-"`H,30W-BD@-#`U(#<P,0T*0412.U=/4DL[ M14Y#3T1)3D<]455/5$5$+5!224Y404),13H[.T-H:6QT97)N($AO=7-E+#TP M1#TP05=A=&5R<VED92P[0VAE<VAA;2P[0G5C:W,L.TA0-2`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`<W5N9&%N8V4N8V]M#0I2158Z,C`P,C$Q,3-4,38S-C(U6(a)T*14Y$.E9# %05)$#0H= ` end

2 1

Figures flowing past end of section.
by Maarten Sneep 25 Jun '03

25 Jun '03

Hi, Subject say some, let me elaborate to make myself perfectly clear. I have a few figures at the end of a section, right before the start of the next section. The figures however end up in the wrong location. I've seen various permutations of the following: figures are placed in a location where they don't fit (with the figure starting below the lower margin and only 50% fitting on the page) and an empty page-end, followed by the section title, followed by one figure below the title, and the second figure (on yet another new page) ... Are there commands to flush the figures, or is there another, more elegant solution? Which part of the setup would you need to see to help me solve this issue? Kind regards, Maarten PS: below is part of the code: ... Note that this is a fit on five measurements. For our frequency range, no extrapolation was needed, but the error on the value of the King correction factor may be as large as 10\percent{}. \placefigure[here][fig:rayleigh-spectrum-nitrogen-argon]{Rayleigh scattering cross sections in Ar and N\low{2} between 15400 and 21400~cm\high{$-$1}. The Rayleigh theory is calculated using \in{equations}[eq:scattering-cross-section-final] and \in[eq:king-correction-factor], the fits are the result from [\in[eq:empirical-scattering-cross-section]] and the markers are measurements.}{\reuseMPgraphic{rayleigh-spectrum-nitrogen-argon}} \placefigure[here][fig:rayleigh-spectrum-carbondioxide]{Rayleigh scattering cross sections in CO\low{2} between 17400 and 21400~cm\high{$-$1}. The Rayleigh theory is calculated using equations \in[eq:scattering-cross-section-final] and \in[eq:king-correction-factor], the fits are the result from [\in[eq:empirical-scattering-cross-section]] and the markers are measurements.}{\reuseMPgraphic{rayleigh-spectrum-carbondioxide}} \section[subsect:gases-at-532]{Scattering in CO\low{2}, N\low{2}, Ar, N\low{2}O, CH\low{4}, CO, SF\low{6} and O\low{2} at 532~nm} % a table here...

1 1

ConTeXt portal
by Michael Guravage 23 Jun '03

23 Jun '03

Hello everyone, I would like to announce the ConTeXt web portal. It's purpose is to facilitate the collection and publication of your ConTeXt best practices, tips, and recipes. The portal's URL is: www.pragma-ade.com:8080/context. The welcome screen reiterates the purpose of the portal, and contains a link to a more detailed document entitled, "Introduction to the ConTeXt portal." Enjoy! With kind regards, Michael A. Guravage -- Michael A. Guravage Email: guravage(a)nlr.nl National Aerospace Laboratory Phone: +31 (0)20 511 3695 P.O. Box 90502 Fax: +31 (0)20 511 3210 1006 BM, Amsterdam, GSM: +31 (0)62 143 1435 The Netherlands URL: <http://www.nlr.nl>

3 2

Table of Contents
by John Culleton 20 Jun '03

20 Jun '03

I want to typeset a book with chapters and sections, but with no numbering, either on the chapter heading itself or in the TOC. I do want both chapters and sections in the TOC. I prefer the dotleader layout (alternative=c). I have spent two days now chasing down blind alleys. What is the shortest way to achieve this goal? -- John Culleton Able Typesetters and Indexers

3 7

"Text flows" under columnsets
by Erik George Hetzner 20 Jun '03

20 Jun '03

Hello ConTeXters, First, I'd like to thank Hans, belatedly, for the columns.pdf manual which I have been happily using. Column sets are one of the main reasons that I have enjoyed working with ConTeXt so much, and having a manual makes them much, much easier to figure out. Second, I would like to ask if "text flows", which are introduced in the manual, are implemented at all. When I attempt to use the examples, ConTeXt complains about the macros not being defined. Searching through the sources also fails to find anything. I am using the latest beta. Are they only defined in the dutch interface? Any pointers at all would be helpful. Regards, Erik Hetzner

2 2

\setupwhitespace[small]
by Nigel King 19 Jun '03

19 Jun '03

Dear ConTeXtnicians I am trying to track down something which causes \setupwhitespace not to work as expected in my document. Minimal documents work correctly but my complex handbook document has been affected. What other commands might cause \setupwhitespace to malfunction. \setupwhitespace[small] does not appear to work. It seems to give the same result as medium. none gives none, 3pt does not give 3pt but instead prints 3pt as though it was text, big does give slightly bigger than medium but not as much as it should. TIA -- Nigel

3 3

some questions about logo and margin background.
by lihb 19 Jun '03

19 Jun '03

Hi, I have two question, I 'm not sure this is the right place to ask, apologize for that. 1st question: I wish to put a small logo at the footer at everypage so I try to write a tex as below: \usemodule[pre-general] \setuppapersize [S6][S6] \setuplayout [width=fit, height=fit, header=32pt, footer=32pt] \setupfootertexts[\bf\ss{test}][\bf\ss{\date}] \def\RedHatLogo% {\externalfigure[shadowman-32.png][type=png]} \definelogo [small logo] [footer] [middle] [command=\RedHatLogo,state=start] \starttext \chapter{test} \placelogos[small logo] \stoptext and I found that the shadowman logo did not show up.. How do I make a .png file show up at corner or bottom of every pages? 2nd question: change the background of margin I have a rightmargin with \startuniqueMPgraphic{test} picture p ; p := btex TEST etex rotated 90 ; setbounds p to boundingbox p enlarged 1pt ; draw p withcolor 0.8white ; currentpicture := currentpicture xysized (\overlaywidth,\overlayheight) ; \stopuniqueMPgraphic \defineoverlay[test][\uniqueMPgraphic{test}] \setupbackgrounds [text] [rightmargin] [background=test] which is a word "TEST" with grey color and white background, how to change the background color? I had try 'fill p withcolor darkcyan ;' but the background of margin is still white. Thanks. lihb lihb(a)phys.sinica.edu.tw

3 3

Conversion LaTeX -> ConTeXt
by Frank Sonnemans 18 Jun '03

18 Jun '03

Hello there, I am starting to move away from LaTeX to ConTeXt and was wondering if some ConTeXt users have written scripts to convert LaTeX documents to ConTeXt documents. Or perhaps just partial conversions, for example from a LaTeX tabular environment to a ConTeXt table. Also I would be interested in layout definitions which could replace the LaTeX article and NTG brief layout, as a starting point for further customization. Best Regards, Frank Sonnemans

2 1

\setupbodyfont[pos] on Mac OSX ---> tfm file not found?
by maillist＠sonnemans.net 18 Jun '03

18 Jun '03

Does anyone have a working TeX installation on OSX where the \setupbodyfont[pos] command works? I cannot get it to work, I tried installating the fonts manually using the texfont command which did not work. I also tried \usetypescript[berry][8a] and other commands wich were mentioned in the maillist archive, but to no avail. I have the impression problems are caused by Context wanting EC encoded files which were dropped from the teTeX distribution some time ago. As I am no font expert I would appreciate some help. The output from my texec is as follows: [zoe:~] frank% texexec context.tex TeXExec 3.1 - ConTeXt / PRAGMA ADE 1997-2002 executable : pdfetex format : cont-en inputfile : context output : standard interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.14159-1.10b-2.1 (Web2C 7.4.5) entering extended mode (./context.tex{/usr/local/teTeX/share/texmf.local/pdftex/config/pdftex.cfg} ConTeXt ver: 2003.1.31 fmt: 2003.6.15 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/usr/local/teTeX/share/texmf.tetex/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex! system (E-TEX) : [line 726] \ifcsname ) system : cont-old loaded (/usr/local/teTeX/share/texmf.tetex/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/teTeX/share/texmf.tetex/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/usr/local/teTeX/share/texmf.tetex/tex/context/user/cont-sys.tex) bodyfont : 12pt rm is loaded language : patterns 2:2-en-2 3:2-uk-2 4:2-de-2 5:2-fr-2 6:2-es-2 7:2-it-2 8:2-nl-2 loaded specials : tex,postscript,rokicki loaded system : context.top loaded (./context.top) specials : loading definition file tpd (/usr/local/teTeX/share/texmf.tetex/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/teTeX/share/texmf.tetex/tex/context/base/spec-fdf.tex <unprotect 3> system (E-TEX) : [line 1815] \ifcsname <unprotect 4> <protect 4> <protect 3>) specials : fdf loaded ) specials : fdf,tpd loaded (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-pre.tex typescript : [serif] [times] [name,ec] (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-exa.tex) typescript : [sans] [helvetica] [name,ec] (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-exa.tex) typescript : [mono] [courier] [name,ec] (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-exa.tex) typescript : [serif,sans,mono] [default] [size] (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-exa.tex) typescript : [map] [ec] [] (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-map.tex pdftex : using map file: original-ams-cmr.map pdftex : using map file: original-context-symbol.map pdftex : using map file: pl0-ams-cmr.map pdftex : using map file: original-vogel-symbol.map pdftex : using map file: original-ams-euler.map pdftex : using map file: ec-adobe-utopia.map pdftex : using map file: ec-bit-charter.map pdftex : using map file: ec-public-antp.map pdftex : using map file: ec-public-antt.map pdftex : using map file: ec-urw-bookman.map pdftex : using map file: ec-urw-courier.map pdftex : using map file: ec-urw-helvetica.map pdftex : using map file: ec-urw-palatino.map pdftex : using map file: ec-urw-times.map pdftex : using map file: ec-urw-zapfchan.map pdftex : using map file: original-youngryu-px.map pdftex : using map file: original-youngryu-tx.map pdftex : using map file: ec-bh-lucida.map ) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.tetex/tex/context/base/type-exa.tex))kpathsea: Running mktextfm ec-utmr8a /usr/local/teTeX/share/texmf/web2c/mktexnam: Could not map typeface abbreviation c- for ec-utmr8a. /usr/local/teTeX/share/texmf/web2c/mktexnam: Need to update /usr/local/teTeX/share/texmf.tetex/fontname/special.map? mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ec-utmr8a This is METAFONT, Version 2.7182 (Web2C 7.4.5) kpathsea: Running mktexmf ec-utmr8a ! I can't find file `ec-utmr8a'. <*> ...jfour; mag:=1; nonstopmode; input ec-utmr8a Please type another input file name ! Emergency stop. <*> ...jfour; mag:=1; nonstopmode; input ec-utmr8a Transcript written on mfput.log. mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input ec-utmr8a' failed. kpathsea: Appending font creation commands to missfont.log. ! Font \*12ptrmtf*=ec-utmr8a at 12.0pt not loadable: Metric (TFM) file not foun d. <to be read again> \relax \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \fontstrategy ...ame #1\csname #2#3#4#5\endcsname \tryingfontfalse \fi <inserted text> ...yle \fontalternative \fontsize \fi \iftryingfont \fontstr... \synchronizefont ...strategy \the \fontstrategies \relax \fi \ifskipfontchar... <argument> \getvalue {\@style@ \fontstyle } \edef \fontstyle {\fontstyle }\if... ... l.4 \setupbodyfont[pos]

3 2

Printing ConTeXt macro files.
by Pierre VINET 17 Jun '03

17 Jun '03

Hi, ConTeXt's macro files are well documented but not easily readable as is. Is there a way to translate them to TeX for printing ? (as does mftmac with metafont files, ltxdoc class in LaTeX or webmac with web listings, etc.) Thanks, -- pv

5 6