- ntg-context - Mailing Lists

footnotes
by Achim Jander 12 Dec '10

12 Dec '10

Hello! Nearly one year ago I posted a question about alignment of footnote-numbers to the list. I then was occupied by other projects, so I now want to catch up and thank you for your replies.I am now again trying to make some work using Context. At first, I have to state that I am impressed about the advancement of Context. But I still have some problems with footnotes: 1. My annoying alignment problem. We now have headalign=flushright, that is the right direction, but not sufficient. What I additionally need is that the width of the number-box is determined by the broadest number on the page, ie I need to have 1 2 3 ... but on the other page: ~8 ~9 10 of course the same with 99 and 100 and so on. In an ideal world, the indent of the footnote-text would also change, but for the moment I could live with an equal indent for all pages having only the alignment of the notes change. I then did some research, read the mail-list etc. What I found on the list was a short message about \doifnoteonsamepageelse, I thougt it could be a starting-point. But trying the given example \starttext \dorecurse {100} { test \footnote{\doifnoteonsamepageelse[footnote]{ibidem}{aaa}} } \stoptext gave me 100 nice little notes, all containing aaa, which was not what I had expected... I then wanted to figure out a little more what was happening, tried to enable tracking with \enabletrackers[structure.notes], but could not find any of the expected messages in the log? What is going on? Because this problem is a real show stopper for me, I hope you can help me getting a solution. 2. The second, but not equal important problem is multicolum footnotes. It seems only to work with very short footnotes, in my example \setupnote[footnote][n=2, columndistance=12pt] \starttext This is just for \footnote{note1} testing This is just for \footnote{note1} testing This is just for \footnote{note1} testing This is just for \footnote{note1} testing This is just for \footnote{This is a very long note which will cover multiple lines. This is a very long note which will cover multiple lines. This is a very long note which will cover multiple lines. This is a very long note which will cover multiple lines. This is a very long note which will cover multiple lines. This is a very long note which will cover multiple lines.} testing This is just for \footnote{note1} testing This is just for \footnote{note1} testing This is just for \footnote{note1} testing \stoptext the long footnote 5 covers both columns. 3. At last I tried to set the footnotes in one paragraph, a layout sometimes used in our publications. As I found, the setup should be \setupnote[footnote][n=0, location=text] but trying it with the text of problem 2 i only got an Arithmetic overflow. For clarification, I am using ConTeXt ver: 2010.12.10 15:15 MKIV fmt: 2010.12.11 int: english/english Thanks, Achim

1 1

Fonts in MKII
by Tom 12 Dec '10

12 Dec '10

I am confused about using fonts in MKII. Which documentation provides the best explanation and most accurate of how to use fonts in MKII. I am particularly interested in using fonts that are bundled in Tex-Live. I will leave bringing in other fonts till later when I understand the basics. Tom Benjey 717-258-9733 voice 717-243-0074 fax Twitter: @TomBenjey

1 0

empty page before chapter and part
by Emanuele Sacco 12 Dec '10

12 Dec '10

Hi all. With the following code the second and eighth pages of the document are not empty as it would like. Thanks in advance ---------------------------------------------------------------------------------------- \setuppapersize[A4][A4] \setuplayout [location=doublesided, header=5mm, headerdistance=15mm, footerdistance=0mm, textwidth=14cm] \setuppagenumbering [alternative=doublesided, location=marginedge, way=bytext, partnumber=no] \setupheadertexts[][part][chapter][] \setupbackgrounds[state=repeat] \setupbackgrounds[header][text][background=whatever] \defineoverlay[whatever][{\framed[width=\overlaywidth,height=\overlayheight,frame=off,bottomframe=on]{}}] \couplepage[chapter][before={\defineoverlay[whatever][]}] \setuphead[chapter][before={\pagetype[chapter]}] \setuphead[part] [placehead=yes, before={\pagetype[chapter]\startstandardmakeup[align={middle,lohi}]\switchtobodyfont[20pt]}, after=\stopstandardmakeup, align=middle, prefix=no, resetnumber=no] \setuphead[chapter] [header=empty] \starttext \completecontent \part{Parte} \chapter{Capitolo} \section{Sezione} \input knuth \subsection{Sottosezione} \input knuth \input tufte \section{Altra sezione} \input knuth \input tufte \input knuth \input tufte \input knuth \input tufte \chapter{Altro Capitolo} \input knuth \input tufte \input knuth \input tufte \input knuth \input tufte \input tufte \input knuth \input tufte \input knuth \input tufte \stoptext ---------------------------------------------------------------------------------------- Emanulele

2 3

customized item list symbol/graphic
by Jan-Erik Hägglöf 11 Dec '10

11 Dec '10

HI All Contexters out there! I'm a Guy from sweden who will appreciate a possible solution to following problem. I'm interested in to do a personalized itemlist with a symbol created in metapost. Here is an example: \startuniqueMPgraphic{square} draw roundedsquare(20,20,2) withrgbcolor (.625,0,0); \stopuniqueMPgraphic \defineoverlay[square][\uniqueMPgraphic{square}] \setupitemgroup [itemize] [1] [symbol=square] \starttext \startitemize[1,columns] \dorecurse{10}{\item itempoint \par} \stopitemize \stoptext This doesn't have any effect so my question is how do I manage this? I did following as an alternative solution and it worked as I wanted but If I run this example the linebreak comes in to the next column(third item), which is not what I want. See example below! \definedescription [task] [text=\uniqueMPgraphic{square}, width=broad] \startcolumns \dorecurse{5}{\task very long sentence i will now write to create this weird issue \par} \stopcolumns How do I prevent this, or is there a better solution? Many thanks in advance Janneman

3 7

\SetTableToWidth undefined?
by Richard Stephens 10 Dec '10

10 Dec '10

Hello all, I have just noticed that \SetTableToWidth does not work in MKIV. Simple example below. \starttext \SetTableToWidth{8cm} \starttable[|l|l|] \NC One \NC Two \NC\SR \NC Three \NC Four \NC\LR \stoptable \stoptext I get the error: ! Undefined control sequence. l.3 \SetTableToWidth {8cm} It does work in MKII and also works if you use \tableSetTableToWidth. Have I missed something, is something wrong or is it just me? Thanks, Richard Converteam UK Ltd. Registration Number: 5571739 and Converteam Ltd. Registration Number: 2416188 Registered in England and Wales. Registered office: Boughton Road, Rugby, Warwickshire, CV21 1BU. CONFIDENTIALITY : This e-mail and any attachments are confidential and may be privileged. If you are not a named recipient, please notify the sender immediately and do not disclose the contents to another person, use it for any purpose or store or copy the information in any medium. http://www.converteam.com Please consider the environment before printing this e-mail.

4 9

Re: [NTG-context] Re; TABLE help
by barney schwartz 10 Dec '10

10 Dec '10

Wolfgang, Phillip, Hans, Thanks for the pointer to : \placetable[here,*split*] However I need this to be one table split across however many pages required, so that I would have as example ... page 1: table 1.1 page 2: table 1.1 (cont.) page 3: table 1.1 (cont) please see attached code. \placetable[here,split][tab:five]{Descriptive Statistics for Salaried Men \& Women} {%\setupTABLE[split=repeat] \bTABLE \bTABLEhead \bTR \bTH Group \eTH \bTH N \eTH \bTH MEAN \eTH \bTH STD \eTH \bTH MIN \eTH \bTH MAX \eTH \bTH Gini \eTH \bTH 80/20 \eTH \eTR \eTABLEhead \bTABLEbody \bTR \bTC[nc=8] 1980 \eTC \eTR \bTR \bTC ALL \eTC \bTC 14202 \eTC \bTC \$195727.9 \eTC \bTC 912.89 \eTC \bTC \$3600 \eTC \bTC \$1320000 \eTC \bTC 0.278 \eTC \bTC 4.54 \eTC \eTR \bTR \bTC Men \eTC \bTC 9852 \eTC \bTC \$224678.5 \eTC \bTC 1123.61 \eTC \bTC \$3600 \eTC \bTC \$1320000 \eTC \bTC 0.242 \eTC \bTC 3.68 \eTC \eTR \bTR \bTC Women \eTC \bTC 4350 \eTC \bTC \$130159.7 \eTC \bTC 991.05 \eTC \bTC \$5000 \eTC \bTC \$448000 \eTC \bTC 0.259 \eTC \bTC 3.91 \eTC \eTR \bTR \bTC[nc=8] 1982 \eTC \eTR . . . . repeated by years . . . \bTR \bTC[nc=8] 1999 \eTC \eTR \bTR \bTC ALL \eTC \bTC XXXXXXXXXX \eTC \bTC \$362625.2 \eTC \bTC 1775.50 \eTC \bTC \$25247 \eTC \bTC \$10600000 \eTC \bTC 0.269 \eTC \bTC 3.99 \eTC \eTR \bTR \bTC Men \eTC \bTC 8034 \eTC \bTC \$419193.3 \eTC \bTC 2614.59 \eTC \bTC \$25247 \eTC \bTC \$10600000 \eTC \bTC 0.249 \eTC \bTC 3.63 \eTC \eTR \bTR \bTC Women \eTC \bTC 6101 \eTC \bTC \$288134.4 \eTC \bTC 1861.66 \eTC \bTC \$54000 \eTC \bTC \$1900000 \eTC \bTC 0.249 \eTC \bTC 3.52 \eTC \eTR \eTABLEbody \bTABLEfoot \bTR \bTC[nc=8]*\$=New Taiwan Dollars \eTC \eTR \eTABLEfoot \eTABLE } full file is attached barney

2 1

Bug in fontswitching
by Willi Egger 10 Dec '10

10 Dec '10

Hi, There seems to be a bug in the font switching mechanism. When using the fonts at small sizes up to 12pt everything is fine. However I detected while developing a title page, that larger sizes will not be honored. I.e. that the font where it is switched to is not loaded at all. See attached minimal example. Kind regards Willi

3 3

bug: no overfullrule in footnotes!
by Steffen Wolfrum 10 Dec '10

10 Dec '10

Hi, please have a look at this minimal example below: the version temporary gives an overfullrule for body text but not for footnotes! Is there something can be done (for the short term)? Regards, Steffen ------- \version[temporary] \showframe \starttext Test \hbox{text text text text text text text text text text text text text text text text text text}. \startfootnote[ftn007] Test \hbox{text text text text text text text text text text text text text text text text text text text text text}. \stopfootnote \stoptext

5 10

Featurerequest: \contextversion
by Jonas Stein 10 Dec '10

10 Dec '10

It would be nice to have a command \contextversion \luaversion \pdftexversion that prints the current context version numbers. That could be a great deal for trouble shooting in the fast growing context world. I could not find a similar command in the wiki. Is that possible? -- Jonas Stein <news(a)jonasstein.de>

3 3

Re: [NTG-context] Re;Help TABLE
by barney schwartz 10 Dec '10

10 Dec '10

Hans, guess I didn't explain wel enough. Using Wolfgang's TABLE module \bTABLE \bTABLEhead \bTR \bTH Group \eTH \bTH N \eTH \bTH MEAN \eTH \bTH STD \eTH \bTH MIN \eTH \bTH MAX \eTH \bTH Gini \eTH \bTH 80/20 \eTH \eTR \eTABLEhead \bTABLEbody \bTR \bTC[nc=8] 1980 \eTC \eTR . .. . lots and lots and lots or rows . ... . \eTABLEbody \bTABLEfoot \bTR \bTC[nc=8]*\$=New Taiwan Dollars \eTC \eTR \eTABLEfoot \eTABLE\eTABLEbody \bTABLEfoot \bTR \bTC[nc=8]*\$=New Taiwan Dollars \eTC \eTR \eTABLEfoot \eTABLE all works fine but when I add: \placetable[here][tab:five]{Descriptive Statistics for Salaried Men \& Women} { in order to get reference, caption I lose the split and so the tables just runs OFF the end of the page suggestions PLEASE barney

2 1