- ntg-context - Mailing Lists

interlines space for local footnotes
by jbf 23 Apr '23

23 Apr '23

I am using only local footnotes in a document, but am having difficulty influencing the interlines space between these notes. Since I am only using local footnotes, I thought initially that the following would work for them \startsetups[footnote:interlinespace] \setupinterlinespace[line=2.4ex] \stopsetups \setupnote[footnote][setups=footnote:interlinespace] but it doesn't. I had hoped there might be something like \setuplocalfootnotes but there is not. I also tried placing the setups locally, either with \startlocalfootnotes[setups=footnote:interlinespace] or \placelocalfootnotes[setups=footnote:interlinespace]. Any idea how I can successfully influence my local footnotes globally? Julian

1 0

Table of contents not appearing.
by Fabrice Couvreur 21 Apr '23

21 Apr '23

Hi, I don't see why the table of contents does not appear. On the other hand, the 12 chapters are present. Thanks Fabrice \startproduct[terminale-manual] \project[terminale-environment] \startfrontmatter \setuppagenumbering [location=] \definefont [ChapterTextStyle] [SansBold*default sa 2.2] \setuphead [title] [style=ChapterTextStyle, align=flushright] \setuplist [chapter] [style=bold, alternative=b, width=1em] \setuplist [section] [margin=1em, width=1.75em] \setuplist [subsection] [margin=2.75em, width=2.25em, distance=\spaceamount] \starttitle[title=Table des matières] \placelist [chapter,section,subsection,subsubsection] [criterium=all, interaction=all, alternative=c] \stoptitle \stopfrontmatter \startbodymatter \component[chapitre_1] \component[chapitre_2] \component[chapitre_3] \component[chapitre_4] \component[chapitre_5] \component[chapitre_6] \component[chapitre_7] \component[chapitre_8] \component[chapitre_9] \component[chapitre_10] \component[chapitre_11] \component[chapitre_12] \stopbodymatter \stopproduct

2 5

missing xml call
by Hans van der Meer 21 Apr '23

21 Apr '23

\xmlatt{}{} has a counterpart \xmlattribute{}{LPATH}{} where one can start the search for the attribute at LPATH. for \xmlchainatt{}{} I am missing such a counterpart \xmlchainattribute{}{LPATH}{} where one can do the same. The problem now is that \xmlchainatt{#1}{att} always finds attribute att when it is defined on the node itself. But consider the case where att="true" exists with the intention to trigger a search higher up in the call chain for that same attribute att. Of course \xmlattribute{#1}{..}{att} is not exactly the same as \xmlchainattribute{#1}{..}{att} would be . yours sincerely dr. Hans van der Meer

1 0

Non-standard font alternatives
by Matthew McCabe 20 Apr '23

20 Apr '23

Hi list, I'm looking to import a font with medium and light weights (in this case Roboto) and define font alternatives so one can quickly switch to light text just as one would switch to bold text. There is a stackexchange answer from Wolfgang (https://tex.stackexchange.com/questions/303648/context-font-weights) which details a solution to this problem for ConTeXt MkIV but despite my best efforts I haven't been able to get things to work for me. There is the Roboto typescript example on ConTeXt garden but it isn't exactly what I'm looking for as for the document I'm making I would prefer to be able to treat the font weights as alternatives rather than separate families since I will be switching often. One can download the exact set of fonts I am using from https://fonts.google.com/specimen/Roboto Here is my code: \definefontalternative[lf] % light \definefontalternative[li] % lightitalic \definefontalternative[md] % medium \definefontalternative[mi] % mediumitalic \starttypescript [sans] [roboto] \definefontsynonym [SansLight] [file:Roboto-Light] [features=default] \definefontsynonym [SansLightItalic] [file:Roboto-LightItalic] [features=default] \definefontsynonym [Sans] [file:Roboto-Regular] [features=default] \definefontsynonym [SansItalic] [file:Roboto-Italic] [features=default] \definefontsynonym [SansMedium] [file:Roboto-Medium] [features=default] \definefontsynonym [SansMediumItalic] [file:Roboto-MediumItalic] [features=default] \definefontsynonym [SansBold] [file:Roboto-Bold] [features=default] \definefontsynonym [SansBoldItalic] [file:Roboto-BoldItalic] [features=default] \definefontsynonym [SansCaps] [file:Roboto-Sans] [features=smallcaps] \stoptypescript \starttypescript [sans] [roboto] \definebodyfont [default] [rm] [lf=SansLight sa 1, li=SansLightItalic sa 1, tf=Sans sa 1, it=SansItalic sa 1, md=SansMedium sa 1, mi=SansMediumItalic sa 1, bf=SansBold sa 1, bi=SansBoldItalic sa 1, sc=SansCaps sa 1] \stoptypescript \definetypeface[roboto][rm][sans][roboto][default] \setupbodyfont[roboto] \starttext \lf Light \li LightItalic \tf Regular \it Italic \md Medium \mi MediumItalic \bf Bold \bi BoldItalic \sc SmallCaps \stoptext - The result is entirely in the regular weight default font: What I've tried: 1. I've tried a great deal of alternative \definefontsynonym arguments such as specifying by name, including the full path to each ttf file 2. I played around with different two character \definefontalternative arguments to ensure there was no overlap with existing commands (as far as I am aware the existing set are otherwise undefined) A few things to note: 1. My current version of ConTeXt is 2022.12.09 16:34 2. For portability I have included the ttf files for Roboto in a directory within my project directory and while setting things up I set OSFONTDIR to include this directory and run `mtxrun --script fonts --reload --force` 3. `mtxrun --script fonts --list --all --pattern=Robo` yields: identifier familyname fontname filename subfont instances roboto roboto robotoregular ./fonts/Roboto/Roboto-Regular.ttf robotoblack roboto robotoblack ./fonts/Roboto/Roboto-Black.ttf robotoblackitalic roboto robotoblackitalic ./fonts/Roboto/Roboto-BlackItalic.ttf robotobold roboto robotobold ./fonts/Roboto/Roboto-Bold.ttf robotobolditalic roboto robotobolditalic ./fonts/Roboto/Roboto-BoldItalic.ttf robotoitalic roboto robotoitalic ./fonts/Roboto/Roboto-Italic.ttf robotolight roboto robotolight ./fonts/Roboto/Roboto-Light.ttf robotolightitalic roboto robotolightitalic ./fonts/Roboto/Roboto-LightItalic.ttf robotomedium roboto robotomedium ./fonts/Roboto/Roboto-Medium.ttf robotomediumitalic roboto robotomediumitalic ./fonts/Roboto/Roboto-MediumItalic.ttf robotonormal roboto robotoregular ./fonts/Roboto/Roboto-Regular.ttf robotoregular roboto robotoregular ./fonts/Roboto/Roboto-Regular.ttf robotothin roboto robotothin ./fonts/Roboto/Roboto-Thin.ttf robotothinitalic roboto robotothinitalic ./fonts/Roboto/Roboto-ThinItalic.ttf 4. Using `\definedfont[name:robotomedium*default] hello` and `\definedfont[file:Roboto-Thin*default] hello` (for example) work exactly as expected I hope this isn't a silly question, I'm very new to ConTeXt and have been struggling for a while so thought I may as well ask in case there's something I'm missing, would appreciate any guidance :) Regards, Matt

5 10

Kaktovik numerals
by Henning Hraban Ramm 20 Apr '23

20 Apr '23

I just came across this thread about the base-20 system of the Inuit people and the numerals invented for it in the 1990s: https://mathstodon.xyz/@johncarlosbaez/110215432175491555 This makes simple calculations just beautiful. Hraban

7 13

About \blackrule
by Fabrice Couvreur 20 Apr '23

20 Apr '23

Hi, The idea is to have a black square whose height is that of the number 3. Thanks Fabrice \setupbodyfont[12pt,pagella] \starttext \blackrule[width=0.71em,height=0.71em]37254H \stoptext

2 2

Google's Roboto Flex font typescript and goodies definition.
by Pawel Urbanski 19 Apr '23

19 Apr '23

Dear Everyone, Following my attempts to create and learn Context's ways to manage fonts, I would like to ask about the following: I've created the structure for fonts in texmf-local folder and after running scripts they are listed. The output for Roboto Flex is as follows: identifier familyname fontname filename subfont instances robotoflex robotoflex robotoflexregular robotoflex.ttf thin extralight light regular medium semibold bold extrabold black extrablack thinitalic extralightitalic lightitalic italic mediumitalic semibolditalic bolditalic extrabolditalic blackitalic extrablackitalic What is the proper way to use family name or font name to create a typescript file and a goodies file to take advantage of optical sizes. Google's Roboto Flex is an upgraded Roboto as a variable font. I know that this topic has been discussed many times and I've read the fonts manual but still have these questions. Most of the examples are rather ready solutions or templates but not always cover ways how to figure out values from scratch and how they correspond. Thanks for help, Pawel

2 5

regular online meet-up
by Henning Hraban Ramm 19 Apr '23

19 Apr '23

You’re invited to join on Wednesday, April 12th, 15:00 CEST (UTC+2) at https://lecture.senfcall.de/hen-rbr-rku-oke (same, but shorter: https://v34h.de/ctxmtg) ConTeXt users of all levels are welcome! Next meeting will be on May 10th. (Same blurb as every time:) [Howto] * No special software installation required; most modern browsers should work (WebRTC required). * Open the above URL, accept the privacy statement, * enter your name, * click "join" (or "start" if you’re the first), * click "with microphone", allow your browser to access it, check the audio. * Your microphone is muted if you join. Activate microphone and/or camera with the buttons at the bottom. * Minimize the default presentation with the "screen" button, bottom right. * If you’d like to share your screen or upload a file, you can make yourself the presenter: Click on your user name, change the setting, then you’ll see the "screen sharing" button beside the camera button; also there’s now "manage presentations" behind the "plus" button. Beware there is only one presenter at a time, so don’t kill someone else’s presentation. [Technical hints] * Sound is usually better if you use a headset (less noise for everyone). * Connection problems are mostly due to low bandwidth or high latency on your side, e.g. with mobile connections. * If audio/video doesn’t work for you, you can still use the text chat. * Screen sharing needs a lot of bandwidth. * BigBlueButton documentation applies: https://bigbluebutton.org/teachers/tutorials/ [Netiquette] * Please use a name that we recognize from here. Some feel uncomfortable with anonymous lurkers. * Mute your microphone while you’re not talking. * It’s nice to show your face at least when you join. * If there are connection problems, stop camera sharing. * The room is set to “everyone’s a moderator“, I trust you... See you, Hraban

3 4

\setupitemize[indentnext=auto] broken?
by Jim 19 Apr '23

19 Apr '23

In the wiki page https://wiki.contextgarden.net/Indentation there is the following example: %------------------------------------------------------------------------ \setupindenting[medium,yes] \setupitemize[indentnext=auto] \startitemize \item One \stopitemize This paragraph should be indented - due to the blank line after \type{\stopitemize}. \startitemize \item Two \stopitemize This paragraph should not be indented. %------------------------------------------------------------------------ Tragically, the paragraph which claims it should be indented is not, in both my test and the wiki page itself. Is this a documentation bug, a ConTeXt bug, or something else yet? Cheers. Jim

4 10

xmlsetentity on the fly?
by Hans van der Meer 19 Apr '23

19 Apr '23

I would like to change an entity 'on the fly'. Example \def\DATE{THEDATE}\expanded{\xmlsetentity{DATE}{\DATE}} \startxmlsetups typ:event \def\DATE{NEWDATE}\expanded{\xmlsetentity{DATE}{\DATE}} Using &DATE; within the <event>. \stopxmlsetups However, using &DATE; inside an <event> always results in THEDATE and never in NEWDATE. How can I change the value of the entity inside the xmlsetups? dr. Hans van der Meer

2 4