- ntg-context - Mailing Lists

Wiki Topics Menu
by Mathieu DUPONT 06 Jun '11

06 Jun '11

Hi, Is there a menu page on the wiki to see all the topics/pages there are, such as these few examples : http://wiki.contextgarden.net/TABLEhttp://wiki.contextgarden.net/Layout I really can't find it if it exits.Otherwise that would be very, very useful, rather that only hitting them when searching for something. Thanks ! Mathieu

3 2

DocBook in ConTeXt - any new ideas?
by Piotr Kopszak 05 Jun '11

05 Jun '11

Dear list, I am beginning a rather tedious documentation project and will most probably end up with DocBook. The fact is I haven't used it for any serious work for about 10 years. Docbook In ConText haven't been updated since 2003. Does it mean it's so perfect or instead rather obsolete? Could you recommend other approaches which work out-of-the-box (or almost). Obviously I would prefer ConTeXt based solutions. DocBook is not mandatory in fact, I would happily learn other documentation system. Main prerequisite is utf-8 output at least in pdf and html and sensible defaults (this time I don't want to be a typographer, nor I want to fiddle with structure). Best Piotr -- http://okle.pl

6 14

typo in context current
by Taco Hoekwater 05 Jun '11

05 Jun '11

Hi, \setuplayout[grid=yes] fails with the current current, because of this small typo in spac-ver.mkiv: --- spac-ver.mkiv.orig 2011-05-17 12:17:33.000000000 +0200 +++ spac-ver.mkiv 2011-06-05 10:16:16.995334850 +0200 @@ -1374,7 +1374,7 @@ \resetsystemmode\v!grid \resetsnapvalue} -\def\docheckgridsnappinyes +\def\docheckgridsnappingyes {\gridsnappingtrue \setsystemmode\v!grid \autosetsnapvalue\askedgridmode}

1 0

Re: [NTG-context] Problem installing minimals on PowerMac G4
by Robert Blackstone 05 Jun '11

05 Jun '11

On Fri, Jun 3, 2011 20:27:56 +0200 Mojca Miklavec wrote > Please send a complete log. > The saved Terminal output of an installation of the minimals which I tried this morning can be downloaded here: http://web.me.com/blackstone.robert/filechute/RB-Install_minimals_04-06-11-… The process stopped 3 times (see lines 6612, 7698 and 7718.) but eventually finished. The result is that ConTeXt mkii works, but mkiv does not. When I try to process a file with mkiv, the log says: "The argument "/Users/robertblackstone/Dropbox/C-tests/Titles-interline_spacing_of/Titles-interline_spacing_of-test1PM.tex" is not a valid TEXROOT path. (There is no file "/Users/robertblackstone/Dropbox/C-tests/Titles-interline_spacing_of/Titles-interline_spacing_of-test1PM.tex/texmf/tex/plain/base/plain.tex") provide a proper tex root (like '. setuptex /something/tex') MtxRun | error unable to identify cnf file MtxRun | error unable to identify cnf file MtxRun | no cnf files found (TEXMFCNF may not be set/known) MtxRun | unknown script: context" Incidentally, when I run the same tex-file with mkiv on my G4 PowerBook, also installed today, the first two sentences of the log are the same. However, it does not ask me to provide a proper tex root and the file is processed normally. I would be grateful for any help but please don't spend too much time on it. I can live with the installation as it is now. Fortunately I have this other Mac on which the minimals work without problems. Kind regards, Robert Blackstone

2 1

xml syntax for \externalfigure
by Thomas A. Schmitz 04 Jun '11

04 Jun '11

Hi all, I'm pulling my hair - thought this was easy, but turns out to be more difficult. The \externalfigure command can take a width and/or a height parameter, and context will be happy to take either one into account. I'm trying to translate that into xml syntax. Here's a minimal example that I can't make work. If anyone can explain what to do here, I might be able to work this out (or will be back with more questions :-) \startbuffer[test] <a> <externalfigure height="1cm" resource="hacker"/> </a> \stopbuffer \startxmlsetups xml:testsetups \xmlsetsetup{\xmldocument}{a|externalfigure}{xml:*} \stopxmlsetups \xmlregistersetup{xml:testsetups} \startxmlsetups xml:a \xmlflush{#1}\par \stopxmlsetups \startxmlsetups xml:externalfigure \externalfigure[\xmlatt{#1}{resource}] [\doifnotempty{\xmlatt{#1}{height}}{height=\xmlatt{#1}{height}}] \stopxmlsetups \starttext \xmlprocessbuffer{main}{test}{} \stoptext The "height" attribute is not taken into account - why? All best Thomas

4 8

Custom function
by Stéphanie Vilayphiou 04 Jun '11

04 Jun '11

Hello, I'm rather new to ConTeXt and would like to simplify my document, in order to simplify processing of documents. I have this: \defineparagraphs[infos][n=1] \setupparagraphs[infos][1][ style={\switchtobodyfont[6pt]}, %command=????, ] \starttext \startinfos \smash{\lower22pt\hbox{ \margintext[left]{ Edition de Trilogie de l'enfer en novembre 2011 chez Sens Tonka }}} \stopinfos \input tufte \stoptext I would like to avoid putting "\inmargin" and "\smash{\lower22pt\hbox{..." by hand and add it directly to the setupparagraphs. Can I do such a thing? Thanks for help! Stéphanie -- <stdin> Stéphanie Vilayphiou http://stdin.fr/ +32 (0)4 89 00 88 59

3 2

Chapter name in new line
by Marco 04 Jun '11

04 Jun '11

How can I get the chapter name in a new line, like: Chapter 1 Foo Bar The following yields to “Chapter1Foo Bar”. \setuplabeltext [en] [chapter=Chapter~] \def\MyChapter#1#2{#1\blank#2} \setuphead [chapter] [command=\MyChapter] \starttext \chapter{Foo Bar} \stoptext Marco

3 3

marginal material in Arabic, tei/xml context mkiv
by Jon Crump 04 Jun '11

04 Jun '11

All, Pardon for trying to boost the topic, but I still can't seem to gain control over marginal material in an Arabic section using the new typo-mar.mkiv. I confess, it's quite likely that I'm just not getting something obvious. I've rotated the page to landscape to show where the marginal material winds up when margin is [right]. When it's [left], it overwrites the beginning of the Arabic line If anyone has thoughts on this, I'd be grateful. context environment file: ~~~~~~~~~~~~~~~~~ \startxmlsetups xml:teisetups \xmlsetsetup{#1}{*}{-} \xmlsetsetup{#1}{body}{xml:*} \xmlsetsetup{#1}{div[@xml:id='arab']}{xml:div:arab} \xmlsetsetup{#1}{div[@xml:id='engl']}{xml:div:engl} \xmlsetsetup{#1}{lb}{xml:lb} \stopxmlsetups \setuppapersize[][A3,landscape] \setuplayout[width=middle,textwidth=5in] \xmlregistersetup{xml:teisetups} \environment ara-sty \startxmlsetups xml:body \xmlflush{#1} \stopxmlsetups \startxmlsetups xml:lb \MarText{\tfxx{xml linebreak numbers}} \xmlflush{#1} \stopxmlsetups \definemargindata [MarText][right][color=red] \startxmlsetups xml:div:arab \setarabic{\switchtobodyfont[Arabic] \xmlflush{#1}} \endgraf \stopxmlsetups \startxmlsetups xml:div:engl \setlatin{\xmlflush{#1}} \stopxmlsetups ~~~~~~~~~~~~~~~~~~~ XML source: ~~~~~~~~~~ <?xml version="1.0" encoding="utf-8"?> <body> <div type="month" xml:id="arab"> <lb n="01" />فقد صممنا على السفر الى اورباو ممشانا من هنا سيكون </div> <div type="month" xml:id="engl"> <lb n="01" />And so, we decided to travel to Europe. Our departure from here will be </div> </body> ~~~~~~~~~~ ara-sty.tex setting up ScheherazadeRegOT: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ \startenvironment ara-sty \mainlanguage[arabic] % Font setup \definefontfeature [arabic] [mode=node,language=dflt,script=arab, init=yes,medi=yes,fina=yes,isol=yes, liga=yes,dlig=yes,rlig=yes,clig=yes, mark=yes,mkmk=yes,kern=yes,curs=yes] \starttypescript [serif] [arabic] \definefontsynonym [Arabic-Light] [name:ScheherazadeRegOT] [features=arabic] \definefontsynonym [Arabic-Bold] [name:ScheherazadeRegOT] [features=arabic] \definefontsynonym [Arabic-Italic] [name:ScheherazadeRegOT] [features=arabic] \definefontsynonym [Arabic-Bold-Italic] [name:ScheherazadeRegOT] [features=arabic] \stoptypescript \starttypescript [serif] [arabic] [name] \usetypescript[serif][fallback] \definefontsynonym [Serif] [Arabic-Light] [features=arabic] \definefontsynonym [SerifItalic] [Arabic-Italic] [features=arabic] \definefontsynonym [SerifBold] [Arabic-Bold] [features=arabic] \definefontsynonym [SerifBoldItalic] [Arabic-Bold-Italic] [features=arabic] \stoptypescript \starttypescript [Arabic] \definetypeface [Arabic] [rm] [serif] [arabic] [default] \stoptypescript \def\ArabicGlobalDir {\pagedir TRT\bodydir TRT\pardir TRT\textdir TRT} \def\ArabicParDir {\textdir TRT\pardir TRT} \def\ArabicTextDir {\textdir TRT} \def\LatinParDir {\textdir TLT\pardir TLT} \def\LatinTextDir {\textdir TLT} \def\LatinGlobalDir {\pagedir TLT\bodydir TLT\pardir TLT\textdir TLT} \define\setarabic {\ArabicGlobalDir% \usetypescript[Arabic]% \setupbodyfont[Arabic,20pt]} \definestartstop [arabicpar] [commands=\Arabic\ArabicParDir] \define[1]\RT {{\Arabic\ArabicTextDir#1}} \define\setlatin {\LatinGlobalDir% \usetypescript[lm]% \setupbodyfont[lm,20pt]} \definestartstop [latinpar] [commands=\Arabic\LatinParDir] \define[1]\LT {{\LatinTextDir#1}} \setupdirections[bidi=local] \stopenvironment

2 1

entity-relation diagram
by Cecil Westerhof 04 Jun '11

04 Jun '11

Is it possible to make an entity-relation diagram with ConTeXt, or can I better look for another tool? -- Cecil Westerhof

2 1

I do not get a highlighted header with M-database
by Cecil Westerhof 04 Jun '11

04 Jun '11

I looked at the example at: http://wiki.contextgarden.net/M-database In this example the first row is highlighted. I tried something like that, but I do not get a highlighted first row. I attached my tex and pdf file. What am I doing wrong? -- Cecil Westerhof

3 3