- ntg-context - Mailing Lists

Cron <context@zapf> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 07 May '23

07 May '23

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip sent 101,078 bytes received 21,565,640 bytes 12,094.18 bytes/sec total size is 449,303,678 speedup is 20.74 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2023-05-07.17 121148788 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-07.17/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-07.17/current 247898201 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-07.17 247898201 total

1 0

How to fix indexes displaying [entry not flushed] with hidden data?
by Joel 07 May '23

07 May '23

I have a document that needs to place some "hidden" data. In other words, there is an entire \input file with an article, but it doesn't get rendered visibly. However, the indexes, registers, and bibliography need to still function as if it were displayed right there on the page. It should be as if the data actually is all there, on a single page, but either compressed inside a single invisible pixel off or plain invisible to readers, not using any physical space on the page. I tried two methods suggested at Stack Exchange for hiding the data: 1. \startnointerference 2. \setbox\scratchbox=\vbox{} These both successfully seem to place the data there, without it actually being visible and bibliograhy entries still function fine. The problem is, index and customer registers are getting confused: When one goes to render the page numbers in \placeindex, it gets confused, displaying the message: "[entry not flushed]" instead of the page number. When I render this minimum working example below, the index is populated with [entry not flushed] instead of page numbers. Note that if I delete the test "This is invisible text."and recompile, I can get a successful render. The problem is, I have text that needs to remain invisible. \starttext \index{birds} \index{insects} \startnointerference \index{spiders} \index{bears} \index{rabbits} This is invisible text. \stopnointerference \input knuth \placeindex \stoptext How to fix indexes displaying [entry not flushed] with hidden data? --Joel

1 0

[ update message ]
by vm 07 May '23

07 May '23

running the sh install.sh script to update to the latest version i get a message: /home/vm/context/tex/texmf-linux-64/bin/luatex: unrecognized option '--socket' there is probably a reason for it, context seems to compile just fine. mtx-context | current version: 2023.05.05 18:39

3 3

FROScon 2023
by Henning Hraban Ramm 07 May '23

07 May '23

Hi, yet another open source conference: https://www.froscon.org 2023-08-05/06 in Bonn-St.Augustin, Germany DANTE will have a booth, and I’m planning to participate, maybe also give a lecture on a ConTeXt subject (practice for TUG, CCCamp and ConTeXt meeting ;) Anyone else? Hraban

1 0

Re: [NTG-context] new units
by skyhorse＠gmx.us 07 May '23

07 May '23

Hans Hagen via ntg-context <ntg-context(a)ntg.nl> wrote: >...... > Oh, so a bug, I'll fix the message. Not really a unit but then, feet > is also not one. > That is incorrect. Feet is an establish and proper unit of measurement, which consists of 12 inches. It is used by, at least, several hundred million people. It can be said that the ability to grok and manipulate fractions has many benefits, which the metric system sorely lacks. Cheers

6 5

upload
by Hans Hagen 06 May '23

06 May '23

Hi, I uploaded a version that provides mtxrun --script install-tikz that when run in the tex root (.../tex) will fetch some tikz stuff from ctan and puts is in texmf-modules. After installing it wipes the files that make no sense (or can interfere or might be harmful) but I didn't check that extensively. Finally it remakes the file dastabase. I don't know if more needs to be installed. It assumes curl to be present (as library or binary). It's a rather stupid script but (I guess) good enough for what it is supposed to do. I can add more (like other modules) in which case it will be renamed. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

3 4

How to show bibliography only for the chapter?
by Joel 06 May '23

06 May '23

I am trying to place a bibliography at the end of the chapter, not the end of the whole document. I tried various code such as `criteria=bychapter` etc., but it will only show the entire bibliography for the whole document. How can I limit the list to the material falling within that chapter? \starttext \startchapter[title={Robots}] \input knuth \cite[source1] \placelistofpublications[criteria=bychapter] \placelistofpublications[way=bychapter] \placelistofpublications[criteria=chapter] \stopchapter \stoptext --Joel

2 1

Cron <context@zapf> /var/www/aanhet.net/context/bin/cron/context-mirror
by root＠ntg.nl 05 May '23

05 May '23

receiving incremental file list ./ ctan.lsr document-2.htm download-1.htm download-2.htm install.htm logo-ade.png logo-cts.png logo-pod.png rss.xml show-fil.pdf context/latest/ context/latest/cont-mpd.zip context/latest/cont-ppc.zip context/latest/cont-sci.zip context/latest/cont-tmf.zip context/latest/cont-tst.7z context/latest/cont-tst.tar.xz context/latest/cont-tst.zip general/manuals/ general/manuals/lowlevel-alignments.pdf general/manuals/lowlevel-boxes.pdf general/manuals/lowlevel-buffers.pdf general/manuals/lowlevel-characters.pdf general/manuals/lowlevel-conditionals.pdf general/manuals/lowlevel-expansion.pdf general/manuals/lowlevel-grouping.pdf general/manuals/lowlevel-inserts.pdf general/manuals/lowlevel-localboxes.pdf general/manuals/lowlevel-loops.pdf general/manuals/lowlevel-macros.pdf general/manuals/lowlevel-marks.pdf general/manuals/lowlevel-paragraphs.pdf general/manuals/lowlevel-registers.pdf general/manuals/lowlevel-scope.pdf general/manuals/lowlevel-security.pdf general/manuals/lowlevel-tokens.pdf general/manuals/lowlevel.pdf sent 116,090 bytes received 24,970,324 bytes 3,344,855.20 bytes/sec total size is 449,288,816 speedup is 17.91 Running archiver: New dir: /var/www/aanhet.net/context//htdocs/archives/context-2023-05-05.19 121136127 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-05.19/latest 126745317 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-05.19/current 247885540 /var/www/aanhet.net/context//htdocs/archives/context-2023-05-05.19 247885540 total

1 0

tikz + lmtx
by Aditya Mahajan 04 May '23

04 May '23

Hi all, For a few months now, all features of tikz have not been working with LMTX. After help from Hans and a bit of trial and error, I think that figured out what was going wrong with the catcodes in m-tikz: Since the texcatcodes are different from what tikz expects, the catcodes have to be set inside \starttikzpicture (in addition to before the loading of tikz files, which was already being done). I am attaching the working m-tikz.mkxl file. I have tested this on my course notes, which make extensive use of simple tikz block diagrams and pgfplots graphs. Perhaps others who were having issues with tikz could test if this fixes everything and, if so, we can add this to the distribution. Aditya

5 11

OBSD 7.3 binary locally compiled… what next?
by damien＠thiriet.web4me.fr 04 May '23

04 May '23

Hi, I upgraded today my OBSD to 7.3 and… realized too late that texlive binaries were on the compile farm, but not the lmtx ones. That was the opportunity to learn self-install, though. I compiled the binary, but I am stuck with the next step What I did: - rm -rf /usr/local/context/* (now I suspect I should have first updated my 7.2 installation and then, after upgrading to 7.3, compiled the binaries…) - download https://www.pragma-ade.nl/context/latest/cont-tmf.zip - unpacked it into /usr/local/context (unzip cont-tmf.zip -d /usr/local/context/) - cd /usr/local/context/source/luametatex - ./build.sh --native Compilation succeeded, looks like the binary lies in /usr/local/context/source/luametatex/build/native/luametatex What's the next step? There was this message: ============== tex trees resources like public fonts : tex/texmf/.... the context macro package : tex/texmf-context/.... the luametatex binary : tex/texmf-native/bin/... optional third party modules : tex/texmf-context/.... fonts installed by the user : tex/texmf-fonts/fonts/data/.... styles made by the user : tex/texmf-projects/tex/context/user/.... binaries: tex/texmf-<your platform>/bin/luametatex : the compiled binary (some 2-3MB) tex/texmf-<your platform>/bin/mtxrun : copy of or link to luametatex tex/texmf-<your platform>/bin/context : copy of or link to luametatex tex/texmf-<your platform>/bin/mtxrun.lua : copy of tex/texmf-context/scripts/context/lua/mtxrun.lua tex/texmf-<your platform>/bin/context.lua : copy of tex/texmf-context/scripts/context/lua/context.lua commands: mtxrun --generate : create file database mtxrun --script fonts --reload : create font database mtxrun --autogenerate context ... : run tex file (e.g. from editor) https://www.pragma-ade.nl/context/latest/cont-tmf.zip The tex/texmf/ folder does not exist yet. Does this mean I have to create that part of the tree by hand (which means should I have unpacked the zip at /usr/local/context/tex/texmf rather than /usr/local/context)?I’d bet copying anything(copying mtxrun from /usr/local/context/scripts/context/stubs/unix/mtxrun ? Should I run install.sh – which I not did, assuming maybe wrongly that it would fail, and if so, which options? Thank you for your time, Damien

2 1