- ntg-context - Mailing Lists

Bug in export with \definehighlight
by Aditya Mahajan 12 Oct '11

12 Oct '11

Compiling the following document ~~~ \definehighlight [object] [style=mono] \setupbackend [export=yes] \starttext \object{test} \stoptext ~~~ gives backend > export > saving xml data in 'test.export backend > export > saving css image definitions in 'test-images.css backend > export > saving css style definitions in 'test-styles.css ! LuaTeX error bad argument #3 to '?' (value expected). system > tex > error on line 0 in file : LuaTeX error ... <empty file> <*> ./test \stoptext Aditya

2 3

about \startstructureblockenvironment
by Jeong Dalyoung 12 Oct '11

12 Oct '11

Dear all, There is an error message, "undefined control sequence as below when I use "\startstructureblockenvironment": mtx-context | run 1: luatex --fmt="/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en" --lua="/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en.lui" --backend="pdf" "./test4.tex" \stoptext This is LuaTeX, Version beta-0.70.1-2011051908 (rev 4277) \write18 enabled. (test4.tex ConTeXt ver: 2011.10.08 11:42 MKIV fmt: 2011.10.12 int: english/english system > cont-new.mkiv loaded (/Users/graph/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > test4.top loaded (test4.top) fonts > latin modern fonts are not preloaded languages > language en is active ! Undefined control sequence. system > tex > error on line 6 in file test4.tex: Undefined control sequence ... 1 \definestructureconversionset[frontpart:pagenumber][][romannumerals] 2 \definestructureconversionset[bodypart:pagenumber] [][numbers] 3 4 \setuplist[chapter][pageconversionset=pagenumber] 5 6 >> \startstructureblockenvironment[frontpart] 7 \setupuserpagenumber[numberconversion=romannumerals] 8 \setuppagenumber[number=1] 9 \stopstructureblockenvironment 10 11 \startstructureblockenvironment[bodypart] 12 \setuppagenumber[number=1] 13 \stopstructureblockenvironment 14 15 \startcomponent Test 16 l.6 \startstructureblockenvironment [frontpart] ? I followed an example in the wiki - http://wiki.contextgarden.net/Table_of_Contents Would you please tell me what is wrong? Here is a sample code. \definestructureconversionset[frontpart:pagenumber][][romannumerals] \definestructureconversionset[bodypart:pagenumber] [][numbers] \setuplist[chapter][pageconversionset=pagenumber] \startstructureblockenvironment[frontpart] \setupuserpagenumber[numberconversion=romannumerals] \setuppagenumber[number=1] \stopstructureblockenvironment \startstructureblockenvironment[bodypart] \setuppagenumber[number=1] \stopstructureblockenvironment \startcomponent Test \startbodymatter \chapter{One} \input knuth \chpater{Two} \input knuth \stopbodymatter \stopcomponent Thank you. Best regards, Dalyoung

2 1

margin notes
by Meer, H. van der 11 Oct '11

11 Oct '11

It seems that margin notes when called from inside \startcombination..\stopcombination do not reach the margin of the paper. Instead they use a margin inside the combination. Is that as intended or unavoidable? It was my objective to have them at the edge of the paper. See minimal example below. % Testing margin notes from inside combinations. % Margin notes do not leave the combinations box. \setuppapersize[A6][A6] \starttext \setupcombinations[location=middle] test\crlf \startcombination[2*1] {abcdefg\inright{m1}}{l1} {abcdefg\inright{m2}}{l2} \stopcombination \crlf \stoptext

2 1

I look for an item bullet with a size between \bullet and \cdot
by Stéphane Klein 11 Oct '11

11 Oct '11

Hi, I use ConTeXT and I look for an item bullet with a size between \bullet and \cdot. Do you have a tip ? Thanks for your help. Regards, Stephane -- Stéphane Klein <stephane(a)harobed.org> blog: http://stephane-klein.info Twitter: http://twitter.com/klein_stephane pro: http://www.is-webdesign.com

6 9

Strange problem related to \usemodule
by Hongwen Qiu 11 Oct '11

11 Oct '11

Hi, I have access to three machines both running GNU/Linux x86-64, I call them "Laptop", "Desktop" and "Remote" respectively here on. The "Laptop" has full access to the internet, so I always install and upgrade my ConTeXt Standalone on it when I'm home. At workplace, I can surfer the internet with the "Desktop" while the RSYNC port is blocked. I only can access the "Remote" through ssh from the "Desktop" without root privilege and can not access the internet. So, I always copied the ConTeXt standalone from my "Laptop" onto my "Desktop", and from my "Desktop" onto "Remote" if necessary. Then, I'll delete the cache before I set the PATH to the appropriate location and run context --make and mtxrun --generate. So the ConTeXt standalones are almost identical on both my "Desktop" and "Remote". And the following minimal example just works fine on my "Desktop" but failed on the "Remote", =========== Minimal Example ============================ \usemodule[vim] \definevimtyping[RUBY][syntax=ruby] \starttext \startRUBY puts "Hello" \stopRUBY \stoptext ========================================================= Actually, on "Remote", whatever module I use, it will prompt the Undefined Control Sequence error regarding the first command I used from that module with the module loaded correctly. Attached is the error log accompany the above minimal example. So, what can be the problem with my "Remote". TIA. for any help.

3 6

Equilibrium in chemical resulted in Undefined Control Sequence error
by Hongwen Qiu 11 Oct '11

11 Oct '11

Hi, The following minimal example: ================================== \starttext \chemical{A,+,B,<->,AB} \stoptext ================================== gives the following error under context version: 2011.10.08 11:42, luatex version beta-0.70.1-2011051918: ! Undefined control sequence. system > tex > error on line 10 in file test.tex: Undefined control sequence ... 1 \starttext 2 3 \chemical{A,+,B,<->,AB} 4 5 \stoptext 6 <argument> \xrightpverleftarrow {}{} \mathematics ...mmode #1\else \normalstartimath #1 \normalstopimath \fi \@@cm::i:equilibrium ...\xrightpverleftarrow {}{}} \enspace l.10 \chemicalequilibrium \inlinechemical ...emicals.inline(\!!bs #1\!!es )} } l.3 \chemical{A,+,B,<->,AB} ?

1 0

Possible bug with \date in french
by Romain Diss 10 Oct '11

10 Oct '11

Hi, Since a recent upgrade of the beta the \date command give "day+ octobre 2011" if \mainlanguage[fr] is set. Minimal example: \mainlanguage[fr] \starttext \date \language[en] (\date) \stoptext A rapid search lead me to these lines (560-571) in "lang-def.mkiv": \installlanguage [\s!fr] [\c!spacing=\v!packed, (...) \c!date={\v!day+,\v!space,\v!month,\v!space,\v!year}] where the "day+" appears. Several lines further (line 670), one found: \defineconversion [\s!fr] [\v!day+] [\frordinaldaynumber] but I have not find any file defining "\frordinaldaynumber" (except "lang- ita.mkii" for MKII). Is there something to fix in the beta or is there something I missed ? Thank you in advance. -- Romain Diss <romain.diss(a)yahoo.fr>

2 3

doublesided layout with floating text blocks wrapped in the main text
by Alexandre Leray 10 Oct '11

10 Oct '11

Hi, how can I insert text blocks of texts of half the width of the text zone (+ gutter) tand make the main text flow wrap around them? I'd like the blocks to be aligned on the outer side of the page (the document is doublesided). My guess was to use floats but I don't need captions. Could you give me a snipet of how i'd need to do it? You'll find a quick example of what I have in mind at this address: http://stdin.fr/wrapped_text.pdf Thanks! Alex

2 3

Any (other) ConTeXt users in Finland?
by Mari Voipio 10 Oct '11

10 Oct '11

Hello All! Inspired by the recent ConTeXt meeting where I again enjoyed meeting other users as well as the developers, I'm wondering if there are any other ConTeXt users in Finland? And if so, would you be interested in a mini-meeting for an afternoon or evening, possibly at my work in Vantaa? If nothing else, we could tell each other what we do with ConTeXt and get ideas and with luck even be able to sort out some problems. I'm far from the nerdiest person in the world, but I could probably manage a short "introduction to ConTeXt", if you are interested but haven't gotten started or if you know people who'd like to try but don't want to do it by themselves. BTW, if any ConTeXt users (Finnish or others) pass by Helsinki airport or the Greater Helsinki area, you are welcome to informally pop into our office and I'll give you coffee/tea and cookies (if we have any) and any ConTeXt help I can give. Just check on this in advance as I'm not always there, but often can arrange things if notified a few days earlier. Terveisin/Best Regards, Mari Voipio K-Patents Oy (in Vantaanportti, just 5 minutes from the airport)

4 5

jump to PDF page
by Steffen Wolfrum 10 Oct '11

10 Oct '11

Hi, I there a command to "jump" to a specific pdf page? Like \goto,\at, \in, \about ... only, in this case a page number should be given! Any ideas? Thanks, Steffen

2 11