- ntg-context - Mailing Lists

Incorrect spacing in math
by Otared Kavian 10 Jul '12

10 Jul '12

Hi Hans, In mkiv, the spacing of an index in the integral sign, in displayed math, is incorrect since a few weeks: for instance \starttext \startformula \int_{\Omega}f(x)dx = \int_{0}^\infty g(t)dt \stopformula \stoptext gives an Omega which is too far away from the integral sign. (Using ConTeXt ver: 2012.07.08 20:02 MKIV fmt: 2012.7.8 int: english/english). In mkii there is no bug in this regard. Is there a quick fix for this? In some of my documents I must use mkiv and the appearance of this bug is a little bit annoying… (I already reported this bug in June). Best regards: OK

3 4

new beta 2012.07.09 22:35 failing
by Meer, H. van der 10 Jul '12

10 Jul '12

This is beta: ConTeXt ver: 2012.07.09 22:35 MKIV fmt: 2012.7.9 int: english/english It fails me with (see below). I am fairly sure now this must be an error seeing the minimal example provided. Here is the most minimal example I could concoct: \setuphead[chapter][header=high] \starttext \chapter{c-one} \stoptext structure > sectioning > @ level 1 : 1 -> c-one ! Extra \else. system > tex > error on line 3 in file practicum.tex: Extra ... 1 \setuphead[chapter][header=high] 2 \starttext 3 >> \chapter{c-one} 4 \stoptext 5 6 \def\edition{2012} % the year of production 7 8 \disablemode[concept] % concept/final 9 10 \disablemode[docent] % typeset teacher info 11 12 \input setup % parameter settings 13 \setuppagenumbering[alternative=doublesided] \strc_sectioning_handle ...ioning_after_yes \else \ifconditional \c_strc_sec... l.3 \chapter{c-one} I guess the problem is signalled in strc-sec.mkiv where strc_sectioning_after_yes occurs in lines 780, 802 and 943, the first two seem the most likely candidates. I do not see at first hand a wrong \if\else\fi count there. Maybe the culprit hides elsewhere. Hans van der Meer

2 1

imposition broken again
by Henning Hraban Ramm 09 Jul '12

09 Jul '12

With at least today’s and yesterday’s beta I can’t get no satisfaction WRT imposition. Before, only 2UP was broken, and I got a workaround. Now, every schema that I tried doesn’t do anything. Was there another syntax change? Of course I ran context with --arrange \setuppapersize [A7][A3,landscape] \setuppagenumbering [alternative=doublesided,location=footer] \setuplayout [margin=0pt,width=fit] \setupbackgrounds [text][text][background=screen,backgroundscreen=0.7] \setupcolors [state=start] \setuplayout [location=middle,marking=on] %\setuppaper[nx=4,ny=2] \setuparranging [2UP] %[2*2*4,doublesided] \def\Style{[2UP]} %{[2*2*4,doublesided]} \startbuffer[Fakepage] \strut \blank[force] \midaligned{\Style} \vfill \midaligned{This is page \recurselevel} \vfill \stopbuffer \setupheadertexts[\CONTEXT] \starttext % \showframe \dorecurse{16}{\getbuffer[Fakepage]\page} \stoptext Grüßlinge, Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

2 2

beta
by Hans Hagen 09 Jul '12

09 Jul '12

Hi, In the process of mkiv-ing a new beta has been uploaded. This time the rendering of sections has been dealt with. New is that one can use 'setups' for rendering. This mechanism is still somewhat experimental (and might get improved) but the idea is given below: \starttext \section{test} \unexpanded\def\whatever#1#2{[#1][#2]} \setuphead[section][command=\whatever] % traditional \section{test} \defineheadplacement[whatever]#1#2{(#1)(#2)} % traditional \setuphead[section][command=,alternative=whatever] \section{test} \defineheadalternative % new [whatever] [alternative=vertical, renderingsetup=whatever] \startsetups[whatever] /\headnumbercontent/\headtextcontent/ \stopsetups \setuphead[section][command=,alternative=whatever] \section{test} \stoptext There are some helpers. These fetch content: \headnumbercontent \headtextcontent These are dimensions: \headwidth \headtextwidth \headnumberdistance \headnumberwidth This is for local spacing setup: \headsetupspacing These are conditionals \headshownumber \headisdisplay Maybe these names will change. Setups are also used in constructions (the building blocks for descriptions, enumerations, notes etc) but there some more work is needed. The code is somewhat faster, but that will probably go unnoticed unless one has documents with hundreds of heads. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

4 6

extra \fi
by Meer, H. van der 09 Jul '12

09 Jul '12

Is the following a known issue with this beta? When a float block moves the error appears: ConTeXt ver: 2012.07.04 23:48 MKIV fmt: 2012.7.6 int: english/english floatblocks > 1 placed floatblocks > 1 saved pages > flushing realpage 5, userpage 1 floatblocks > 1 moved floatblocks > 2 moved ! Extra \fi. A short example is difficult to procure, but adding one line of text, inducing the float to move, triggers the error. Hans van der Meer

4 3

Broken Nightly 2012.07.08 20:02 - unpredictable errors on blank lines
by Prashanth 09 Jul '12

09 Jul '12

Hi, I get mysterious error messages on blank lines or on lines that were completely innocuous a month ago. The error message I get is: system > tex > error on line 315 in file proposal-context.context: Extra ... 305 \bTR\bTD of \eTD\bTD 73 \eTD\eTR 306 \bTR\bTD on \eTD\bTD 71 \eTD\eTR 307 \bTR\bTD say \eTD\bTD 87 \eTD\eTR 308 \bTR\bTD to \eTD\bTD 86 \eTD\eTR 309 \bTR\bTD up \eTD\bTD 34 \eTD\eTR 310 \eTABLE 311 } 312 313 Comparing the accuracy of GMB tags of words against those generated by the C&C parser (see \in{Table}[tab:tag-accuracy]) revealed some problematic words for the parser. 314 Specifically, other than PP attachments, it revealed faults in telling transitives and ditransitives apart. 315 >> 316 317 \chapter{Evaluation} 318 The evaluation of the output would be similar to the methods we use for analyzing parses. Given sentences that have specific features that result in wrong parses, my software will be able to generate the correct parse trees. 319 320 \completepublications[criterium=text] 321 322 %\showfontstrip 323 %\showbodyfont 324 \stopbodymatter 325 \stoptext After trying to hunt down error messages on \startitemize[n] ... \item ... in some completely unrelated segment of the same file, the error message (essentially, the same) moved to this line. All the citations and cross-references in the document are broken too, but I suppose that's because the compiler fails at line 315. I'm sorry, no minimal example this time - I tried but I was unable to reproduce the problem in a minimal example. I have uploaded the entire set to https://rapidshare.com/files/3050234632/trial.tgz. I have included my build logs too. Best regards, Prash

1 0

table of contents
by Meer, H. van der 09 Jul '12

09 Jul '12

Is there a simple manner to restrict the table of contents to chapter and section, excluding subsections, subsubsections? Now I use (and get all) \startfrontmatter% the table of contents \setuppagenumber[number=1,numberconversion=romannumerals] \completecontent \stopfrontmatter I tried \completecontent[criterium={chapter,section}] bat that doesn't work. Could not find it on the wiki, but I might have missed the right search term. Hans van der Meer

4 3

modes + arranging
by Thomas A. Schmitz 09 Jul '12

09 Jul '12

Hi all, sorry for the slightly silly example, but it's something I can't figure out, and it has worked before. For processing my documents, I have defined a mode which will arrange pages. Here's the silly example test.tex: \startmode[arranged] \setuppapersize[A6][A4] \setuparranging[2*4] \stopmode \setuppagenumbering[state=stop] \starttext \dorecurse{8}{\null\vfill\centerline\recurselevel\vfill\null\page} \stoptext When I process this with context --mode=arranged test I get the expected output. When I process it with context --mode=arranged --arrange test the pages are NOT arranged. I need the --arrange switch for my data, and I don't understand what's going wrong here. Behavior is the same with current beta and a slightly older version (06.30). Thanks Thomas

2 2

TeXlive 2012 released
by luigi scarso 08 Jul '12

08 Jul '12

http://tug.org/texlive/ -- luigi

3 2

Bug in \typo_paragraphs_setup_three.
by Willi Egger 08 Jul '12

08 Jul '12

Hello! I wanted to write a letter… Then it appeared that there is something wrong in \typo_paragraphs_setup_three. The problem is present in todays beta (as was in the previous version). Please try the attached minimal example. Thank you and kind regards Willi

3 3