- ntg-context - Mailing Lists

where is completecontent defined?
by Meer, H. van der 16 Apr '13

16 Apr '13

I tried to find the definition of \completecontent in the source, but searching for it doesn't turn up its occurence. Where do I have to look? Hans van der Meer

3 3

tekst before \starttext?
by Meer, H. van der 16 Apr '13

16 Apr '13

I thought that typesetting should start after \startext and that anything before it should be ignored. That is indeed the case with the following input: ABC \starttext CONTENT \stoptext But add a \setupbodyfont and suddenly the ABC appears: \setupbodyfont[lmodern] ABC \starttext CONTENT \stoptext Is this correct behaviour? It is a nuisance because this phenomenon causes a spurious blank page appears in my book. It might be a recently introduced because I did not experience this in the past. ConTeXt ver: 2013.04.16 12:08 MKIV beta fmt: 2013.4.16 Hans van der Meer

2 1

[***SPAM***] Centering a figure in a frame
by "H. Özoguz" 16 Apr '13

16 Apr '13

Hi, one more shorty today: \starttext \placefigure[here,nonumber]{}{\framed[frame=on, offset=3mm]% {\externalfigure[testbild][width=8cm,scale=2000]}} \stoptext That gives a frame around a figure. But the figure is not perfectly centered in the frame, not all four sides have 3mm, the upper distance of the frame is smaller than the lover distance. How to correct that? Huseyin

2 1

beta
by Hans Hagen 16 Apr '13

16 Apr '13

Hi, I uploaded a beta: - combinations extended cf mails on this list - new windows stubs (might need testing) - frac fixed - fixed more restrictive tex file lookup in run Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 2

Placefigure without Caption-Numbering
by "H. Özoguz" 16 Apr '13

16 Apr '13

How to deactive the Caption-Numbering: \starttext \placefigure[here]{Blub}{\externalfigure[image][width=6cm]} \stoptext I want the caption "Blub", but not the "Figure 1" label. Thanks! Huseyin

2 1

Using Product-component
by Aditya Mahajan 16 Apr '13

16 Apr '13

Has something changed recently on how product-component structure is supposed to be used? I have three files: 1. prd.tex \environment env \startproduct prd \component cmp \stopproduct 2. env.tex \startenvironment env \define\testing{This is a test} \stopenvironment 3. cmp.tex \product prd \startcomponent cmp Testing \testing \stopcomponent When I compile cmp.tex, I get: %--------------------------%<----------------------------- mtx-context | run 1: luatex --fmt="/home/adityam/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="cmp" --lua="/home/adityam/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./cmp" --c:input="./cmp" --c:kindofrun=1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.76.0-2013040516 (rev 4627) \write18 enabled. (/home/adityam/media/opt/context-minimals/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2013.04.14 16:51 MKIV beta fmt: 2013.4.14 int: english/english system > 'cont-new.mkiv' loaded (/home/adityam/media/opt/context-minimals/texmf-context/tex/context/base/cont-new.mkiv) system > files > jobname 'cmp', input 'cmp', result 'cmp' fonts > latin modern fonts are not preloaded languages > language 'en' is active (cmp.tex{/home/adityam/media/opt/context-minimals/texmf-fonts/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) fonts > typescripts > unknown library 'loc' {/home/adityam/media/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-math.map}{/home/adityam/media/opt/context-minimals/texmf-fonts/fonts/map/dvips/lm/lm-rm.map} fonts > 'fallback modern rm 12pt' is loaded (prd.tex (env.tex) (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex (cmp.tex (prd.tex ! TeX capacity exceeded, sorry [text input levels=127]. system > tex > error on line 5 in file prd.tex: TeX capacity exceeded, sorry [ ... 1 \environment env 2 3 \startproduct prd 4 5 >> \component cmp 6 7 \stopproduct 8 \ctxcommand #1^^@-\directlua {commands.#1} l.5 } \ctxcommand #1^^@-\directlua {commands.#1} l.5 \component cmp ! ==> Fatal error occurred, no output PDF file produced! mtx-context | fatal error: return code: 1% %--------------------------%<----------------------------- Shouldn't the product file not load the component file (or anything else inside \startproduct .. \stopproduct) when compiling a component?

4 4

Re: [NTG-context] Title of figure not below the figure, but on the right side
by "H. Özoguz" 16 Apr '13

16 Apr '13

Am 15.04.2013 19:03, schrieb ntg-context-request(a)ntg.nl: > Define a float type `rightfigure` that inherits from `figure`; > then setup that float's caption with \setupcaption[rightfigure][...=...]. > Like so: > > \definefloat[rightfigure][rightfigure][figure] > \setupcaption[rightfigure][location=right] > > \starttext > \placefigure{caption 1}{\framed{figure 1}} > \placerightfigure{caption 2}{\framed{figure 2}} > \placefigure{caption 3}{\framed{figure 3}} > \stoptext Thanks, that works! So I use now: \definefloat[rightfigure][rightfigure][figure] \setupcaption[rightfigure][location=right] \startplacerightfigure[ title={Tolles Bild}, reference=fig:demo, number=no] {\framed{figure}} \stopplacerightfigure How can I now tell, where to place the figure? There are keys like "here", or "force", or "bottom" and so on, how to use them in this configuration? (my tries failed so far) Huseyin

3 2

How to typeset the titlepage and its verso in ConTeXt?
by Tim Li 16 Apr '13

16 Apr '13

I try to typeset the titlepage and its verso using ConTeXt, but it always generate an empty page on the right if facing. \setupinteraction [state=stop, title=Life in These Days, author=Tim Li] \setupinteractionscreen [option=doublesided] \usetypescript[palatino] \setupbodyfont[palatino,12pt] \setuppagenumbering [location={footer,middle}, alternative=doublesided] \setupmakeup [standard] [pagestate=start] \starttext \startfrontmatter % titlepage \startmakeup[standard] %[doublesided=no] \vskip2in \midaligned{\switchtobodyfont[36pt]\bf Life in These Days} \vfill \midaligned{\switchtobodyfont[20pt]\bf Tim Li} \blank[medium] \midaligned{\switchtobodyfont[20pt]\bf January 11, 2013} \stopmakeup % its verso \startmakeup[standard] %[page=no] This document was typeset by using \CONTEXT. \vfill \stopmakeup % dedication % preface % contents \stopfrontmatter \startbodymatter % \stopbodymatter \stoptext If add [doubesided=no] to the first \startmakeup[standard] that produce the titlepage, it will produce a page with page number 2 at the right of the titlepage and the verso of this titlepage will be the next page following page 2. That's not what I want. How to set the options of the \startmakeup so that I can typeset the titlepage with its verso just after it. If so, when the document is printed, the titlepage and its verso will be presented on the same paper like that in the ConTeXt manual(if printed, the tiltepage and its verso of the manual will be on the same paper).

2 2

Re: [NTG-context] Center-Aligment in column spans
by "H. Özoguz" 16 Apr '13

16 Apr '13

Am 16.04.2013 17:41, schrieb ntg-context-request(a)ntg.nl: >> \starttext >> >> >> >>\starttable[|l|l|l|] >> >>\NC \bf Methode \VL \bf Relevanz \VL \bf Bewertung \NC\AR >> >>\HL >> >>\NC \THREE\JustCenter \it Nat?rliche Methoden \NC\AR >> >>\HL >> >>\NC Klevirak \VL 5-6 \VL Toll \NC\AR >> >>\stoptable >> >> >> >>\stoptext >> >> >> >>Wolfgang > > > >Thanks! And how to center the complete table on the page? Now I see that \JustCenter does not really center: \starttext \starttable[|l|c|l|] \NC {\bf Column 1} \VL {\bf Column 2} \VL {\bf Column 3} \SR \HL \THREE\JustCenter \it Natürliche Methoden \SR \NC First entry \VL short entry \VL looooooooooooooogn entry \AR \stoptable \stoptext You can see, that "Natürliche Methoden" is not correctly centered. For my purpose, it would be indeed not best to center it with respect to the complete row of the table, but with respect to the middle-column (second one) only. So that "Natürliche Methoden" is directly centered above "short entry". Howto? Thanks. Huseyin

2 1

the difference between \def and \define
by Tim Li 16 Apr '13

16 Apr '13

In plain TeX, we always use \def for creating a new macro, but in ConTeXt, sometimes it won't work, especially when making own chapter titles. The \def can produce the error message like this : "Argument of \... has an extra }". \define in ConTeXt can solve this problem. What's the difference between \def and \define? Can I use \define to replace all \def?

6 13