- ntg-context - Mailing Lists

Re: [NTG-context] How to hack the lua files
by Lance Larsen 07 Jun '13

07 Jun '13

luigi, When I started exploring how to map equation references (eq:name) to equation numbers (4.2), I noticed that the 'tuc' file included the equation reference (eq:name), but I was not able to identify anywhere where it indicates the actual equation label specified in the document. Below is an example of the tuc output. 'eq:DVOL_RVI_17' is equation (4.28) in the document: { ["metadata"]=142, ["numberdata"]=237, ["prefixdata"]=11, ["references"]={ ["block"]="bodypart", ["internal"]=122, ["realpage"]=47, ["reference"]="eq:DVOL_RVI_17", ["section"]=79, }, } There is nowhere in the tuc file that contains 4 and 28 near each other. I checked this for other equations as well and concluded that the tuc file does not contain the actual equation numbers that are used. If I am missing something or you have any other suggestions that might help me to extract this info, I would sure appreciate the help. -Lance P.S. Thanks for the tip on using 'context --make' to rebuild the files. I figured this out by guesswork before I got your response, but I have appreciated how helpful many of you have been on this list. ------ On Fri, Jun 7, 2013 at 3:00 PM, Lance Larsen <lance.c.larsen at gmail.com>wrote: > If I modify a core lua file how do I remake the format file? Is this > something that is done from mtxrun.exe? I would certainly prefer to use a > hook rather than modifying a core file, but how do I identify the hooks > that > are available? Is there a list of hooks that are available, or a standard > way that hooks are called from the context code so that I can look for an > appropriate hook? Where do I place my hook scripts? Is there a guide that > is > available that might get me started? > > What I trying to do is map equation references to the equation number > generated by context. So for example, if I have an equation: > > \placeformula \startformula > \NC F = m a \NC \NR[eq:newtonslaw] > \stopformula > \usemodule[newmath] \setupformulas[way=bytext,prefix=no] \setupsubformulas[conversion=romannumerals] \starttext \placenamedformula[eq:TEST]{Der einfache Test} \startformula c^2 = a^2 + b^2. \stopformula \stoptext and look into the tuc file (it's a lua file) -- luigi

2 1

Re: [NTG-context] How to hack the lua files
by Lance Larsen 07 Jun '13

07 Jun '13

Hans, Your reply below was very helpful. I looked at the context command line options and saw 'make'. After running this, the code changes took effect. Thankyou. I could still use help in identifying where equation numbers are defined in the code so that I can add a tracker. Do you have a suggestion of which function (or at least lua file) I should look in for this? I am also curious how hooks are defined, so that I can identify them in the code and see if there is one that would meek my purpose - also where the hook scripts are placed so that context can find them. Thanks again for the reply which got me over the first hurdle. -Lance ------------------------------ Message: 4 Date: Fri, 07 Jun 2013 09:25:36 +0200 From: Hans Hagen <pragma(a)wxs.nl> To: ntg-context(a)ntg.nl Subject: Re: [NTG-context] How to hack the lua files Message-ID: <51B18AF0.5010206(a)wxs.nl> Content-Type: text/plain; charset=windows-1252; format=flowed On 6/7/2013 1:20 AM, Lance Larsen wrote: > I have a version of context standalone installed, and I am trying to > add some functionality I need to strc-ref.lua. As a simple test to see > if modifying the file was working, I enabled the > ?structures.referencing.identifying? tracker and verified that I was > getting messages from this tracker in the log. I then modified the log > statement in strc-ref.lua and processed the document again. The > changes I made to the lua file did not seem to be active. I verified > that there is only one log statement that matches the output I am > seeing. Why would my lua code change not be active? Is the lua code > cached somehow? (I am running this from windows if that matters). > > The code I modified is under the path: > > context\tex\texmf-context\tex\context\base\ strc-ref.lua if you patch files that way you need to remake the format file I don't know what you patch, but changing something in a core file is no guarantee for the future. It's not a problem to add functionality (lots of hooks for that) but best do that in a local module that gets loaded at runtime then. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

2 1

Re: [NTG-context] ConTeXt with TeXnicCenter
by "H. Özoguz" 07 Jun '13

07 Jun '13

> >/ Maybe you want to use mkiv and texcniccenter is not configured for it. > />>/ > />/ You are right, of course I want to use mkiv. But how to configure > />/ texniccenter for it? In the instructions of the wiki I did not see any > />/ different ways to configure it for mkii or mkiv. > />/ > />/ I guess that > /instead of "texexec" you should use "context" > but I dont' know how to do it with texcniccenter . My parameters for the compiler are now: context --bat --nonstop --pdf --interface=nl --color "%bm" --synctex=-1 But that does not work (even with the simple working example not). How to correct the arguments? Can I read somewhere what this arguments exactly mean and how to use them? Huseyin

3 2

Re: [NTG-context] ConTeXt with TeXnicCenter
by "H. Özoguz" 07 Jun '13

07 Jun '13

> Maybe you want to use mkiv and texcniccenter is not configured for it. You are right, of course I want to use mkiv. But how to configure texniccenter for it? In the instructions of the wiki I did not see any different ways to configure it for mkii or mkiv. Huseyin

2 1

ConTeXt with TeXnicCenter
by "H. Özoguz" 07 Jun '13

07 Jun '13

Hello all together, as I am a bit irritated of the limitations of TeXWorks (both in stability and comfort for big project), I want to switch to TeXnicCenter. I followed the instructions of http://wiki.contextgarden.net/TeXnicCenter and wantet to test it. With a simple \starttext \input knuth \stoptext it works (up to problems with Sumatra PDF, the invers search does not work, the instruction of the wiki are maybe outdated, but that is a topic for another thread...). But if I take a bit more complicated document, it totally fails. Here is my testdocument, which compiles fine in TeXWorks: %Testfile ++++++++++++++++++++++++++++++++++++++++ \definefont[amiri][name:arial*arabic at 35 pt] \starttext {\setupalign[r2l]\amiri اللّـهُمَّ صَلِّ عَلى مُحَمَّد وَآلِ مُحَمَّد } \stoptext %++++++++++++++++++++++++++++++++++++++++ (Everybody should be able to compile this with the font arial for arabic.) The compiling fails and this is the log (very long, sorry...): ********************************************************************************************************* This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013/W32TeX) (format=cont-nl 2013.5.11) 7 JUN 2013 11:51 entering extended mode \write18 enabled. **C:/Users/Hussein/Documents/Buch/Buch.tex (c:/Users/Hussein/Documents/Buch/Buch.tex systems : BEWARE: synctex functionality is enabled! ConTeXt ver: 2013.04.09 10:38 MKII fmt: 2013.5.11 int: dutch/dutch systeem : cont-new.mkii geladen (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/cont-new.mkii systems : beware: some patches loaded from cont-new.mkii ) systeem : cont-sys.rme geladen (c:/Users/Hussein/context/tex/texmf-context/tex/context/user/cont-sys.rme (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/type-siz.mkii) (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/type-one.mkii)) systeem : Buch.top geladen (./Buch.top ) korps : 12pt rm wordt geladen taal : patronen nl->texnansi:texnansi->1->2:2 nl->ec:ec->2->2:2 us-> ec:ec->3->2:3 de->texnansi:texnansi->4->3:3 de->ec:ec->5->3:3 da->ec:ec->6->2:2 sv->ec:ec->7->2:2 af->ec:ec->8->2:2 gb->ec:ec->9->2:2 fr->texnansi:texnansi->1 0->2:2 fr->ec:ec->11->2:2 es->ec:ec->12->2:2 ca->ec:ec->13->2:2 it->texnansi:te xnansi->14->2:2 it->ec:ec->15->2:2 la->ec:ec->16->2:2 pt->texnansi:texnansi->17 ->2:2 pt->ec:ec->18->2:2 ro->ec:ec->19->2:2 pl->pl0:pl0->20->2:2 pl->ec:ec->21- >2:2 pl->qx:qx->22->2:2 cs->il2:il2->23->2:2 cs->ec:ec->24->2:2 sk->il2:il2->25 ->2:2 sk->ec:ec->26->2:2 hr->ec:ec->27->2:2 sl->ec:ec->28->2:2 tr->ec:ec->29->2 :2 tk->ec:ec->30->1:2 lt->l7x:l7x->31->2:2 agr->agr:agr->33->2:2 fi->ec:ec->34- >2:2 hu->ec:ec->35->2:2 ru->t2a:t2a->37->2:2 uk->t2a:t2a->38->3:3 geladen specials : dvips geladen \openout3 = `Buch.tui'. \openout0 = `Buch-mpgraph.mp'. systems : system commands are enabled taal : taal nl is actief specials : definitiefile tpd wordt geladen (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/spec-tpd.mkii specials : definitiefile fdf wordt geladen (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/spec-fdf.mkii)) kleur : mpcmyk kleurruimte wordt ondersteund kleur : mpspot kleurruimte wordt ondersteund kleur : systeem rgb is globaal actief publications : file Buch.bbl not found, waiting for bibtex systems : begin file Buch at line 3 ! Font \**amiri**:=arial*arabic at 35.0pt not loadable: Metric (TFM) file not f ound. <to be read again> \relax \definefontlocal ...ndcsname \lastfontname \relax \expandafter \let \expanda... \dododefinefont ...ontspec {#2}\rawfontidentifier \let \localrelativefontsiz... l.4 {\setupalign[r2l]\amiri I wasn't able to read the size data for this font, so I will ignore the font specification. [Wizards can fix TFM files using TFtoPL/PLtoTF.] You might try inserting a different font spec; e.g., type `I\font<same font id>=<substitute font name>'. Missing character: There is no Ø in font nullfont! Missing character: There is no § in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no „ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no „ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‘ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no € in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‡ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no … in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‘ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no µ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no „ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‘ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no ¹ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no „ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‰ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no … in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no … in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‘ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no ¯ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ˆ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no ¢ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no „ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no … in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no … in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no ‘ in font nullfont! Missing character: There is no Ù in font nullfont! Missing character: There is no Ž in font nullfont! Missing character: There is no Ø in font nullfont! Missing character: There is no ¯ in font nullfont! fonts : resetting map file list {c:/Users/Hussein/context/tex/texmf-context/fonts/map/pdftex/context/original-e mpty.map} fonts : using map file: original-base {c:/Users/Hussein/context/tex/texmf-context/fonts/map/pdftex/context/original-b ase.map} fonts : using map file: original-ams-base {c:/Users/Hussein/context/tex/texmf-context/fonts/map/pdftex/context/original-a ms-base.map} fonts : using map file: original-public-lm {c:/Users/Hussein/context/tex/texmf-context/fonts/map/pdftex/context/original-p ublic-lm.map} fonts : using map file: lm-ec {c:/Users/Hussein/context/tex/texmf/fonts/map/dvips/lm/lm-ec.map} fonts : using map file: lm-math {c:/Users/Hussein/context/tex/texmf/fonts/map/dvips/lm/lm-math.map} fonts : using map file: lm-rm {c:/Users/Hussein/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map} fonts : using map file: original-ams-euler {c:/Users/Hussein/context/tex/texmf-context/fonts/map/pdftex/context/original-a ms-euler.map} (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/sort-def.mkii) (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/sort-lan.mkii) [1.1] systems : end file Buch at line 7 (c:/Users/Hussein/context/tex/texmf-context/tex/context/base/cont-err.mkii systems : no file 'cont-sys.tex', using 'cont-sys.rme' instead ) ) Here is how much of TeX's memory you used: 912 strings out of 254624 14622 string characters out of 1239057 2870587 words of memory out of 4262125 43298 multiletter control sequences out of 15000+100000 82418 words of font info for 37 fonts, out of 2000000 for 5000 397 hyphenation exceptions out of 8191 46i,17n,49p,277b,579s stack positions out of 10000i,500n,10000p,4000000b,50000s {c:/Users/Hussein/context/tex/texmf/fonts/enc/dvips/lm/lm-ec.enc}<c:/Users/H ussein/context/tex/texmf/fonts/type1/public/lm/lmr12.pfb> pdfTeX warning: pdftex.exe: no GlyphToUnicode entry has been inserted yet! Output written on Buch.pdf (1 page, 15373 bytes). PDF statistics: 13 PDF objects out of 1000 (max. 8388607) 9 compressed objects within 1 object stream 0 named destinations out of 1000 (max. 500000) 1 words of extra memory for PDF output out of 10000 (max. 10000000) ********************************************************************************************************* What is the problem here? Seems something with arabic, but what exactly and how to fix it? Thanks for your kindely help! Huseyin

2 1

How to hack the lua files
by Lance Larsen 07 Jun '13

07 Jun '13

I have a version of context standalone installed, and I am trying to add some functionality I need to strc-ref.lua. As a simple test to see if modifying the file was working, I enabled the 'structures.referencing.identifying' tracker and verified that I was getting messages from this tracker in the log. I then modified the log statement in strc-ref.lua and processed the document again. The changes I made to the lua file did not seem to be active. I verified that there is only one log statement that matches the output I am seeing. Why would my lua code change not be active? Is the lua code cached somehow? (I am running this from windows if that matters). The code I modified is under the path: context\tex\texmf-context\tex\context\base\ strc-ref.lua -Lance Larsen

2 1

\page[blank], \page[header]
by Procházka Lukáš Ing. - Pontex s. r. o. 07 Jun '13

07 Jun '13

Hello, just an idea: \page[header] and \page[blank] suppresses temporarily header defined by \setupheadertexts. But, when header is underlined by \setupbackgrounds[header][text][bottomframe=on], this frame (rule) is not cancelled - it still appears on the (blank) page. Wouldn't be good that \page[header] and \page[blank] disable header & footer frames (rules), too? Maybe another keyword for \page would be handy for this purpose, e.g. \page[Header], \page[HEADER], \page[BLANK]. Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

2 2

Re: [NTG-context] Side-by-side framed text blocks
by Aditya Mahajan 07 Jun '13

07 Jun '13

On Fri, 7 Jun 2013, honyk wrote: > Dear Marco, > >>> I'd like to type two blocks of text with different 'align' settings >> side by >>> side. >> >> Here's one way to do it: >> >> \setupframed >> [offset=1ex, >> width=8cm, >> frame=off] >> >> \starttext >> \placesidebyside >> {\startframed[align={normal,left}] \input knuth\par\stopframed} >> {\startframed[align={normal,right}] \input knuth\par\stopframed} >> \stoptext >> >> Marco > > thanks for this. I removed that framed=off option and it turned out to be sligthly different from what I'd like to achieve. > > My goal is to have two blocks with a vertical gap between them and to have these blocks framed (or with the colored background) at the text area - without the cell spans - to show differences between the standard and 'hanging' alignments (that right border should cross the punctuation in the hanging mode). > > Below each 'column' I'd like to place a short description (centered) - exactly as on the referenced examples. \startcombination? http://wiki.contextgarden.net/Command/startcombination Aditya

1 0

Re: [NTG-context] Side-by-side framed text blocks
by Marco Patzer 07 Jun '13

07 Jun '13

On 2013–06–06 honyk wrote: > I'd like to type two blocks of text with different 'align' settings side by > side. Here's one way to do it: \setupframed [offset=1ex, width=8cm, frame=off] \starttext \placesidebyside {\startframed[align={normal,left}] \input knuth\par\stopframed} {\startframed[align={normal,right}] \input knuth\par\stopframed} \stoptext Marco

2 1

Side-by-side framed text blocks
by honyk 06 Jun '13

06 Jun '13

Dear All, I'd like to type two blocks of text with different 'align' settings side by side. A desired output can be found e.g. in examples 1.9-1.10 in http://www.pragma-ade.com/general/manuals/style.pdf Here blocks have a background instead of frames though. Both variants are acceptable for me. I am lost in various text box, framing or columns switches and unable to create something similar. Thanks, Jan

1 0