- ntg-context - Mailing Lists

setting size for mainfont or sansfont in stable simplefonts
by Lars Huttar 06 Nov '13

06 Nov '13

Hello, I'm using the simplefonts module from TeX Live 2013. (I can't use the new simplefonts for this production project, due to stability requirements.) I have the following, which works well for the most part: \setupbodyfontenvironment[default][em=italic] \usemodule[simplefonts][size=9.2pt] \setmainfont[Gentium Book Basic] \setsansfont[Tex Gyre Heros] \starttext Serif typeface: regular, {\em italic}, {\bf bold} and {\bf\em bold italic} styles. \ss Sans--serif typeface: regular, {\em italic}, {\bf bold} and {\bf\em bold italic} styles. \stoptext Because the Tex Gyre Heros font is larger than Gentium Book Basic at a given point size, when I compile this document, there is a size mismatch between the serif and the sans typefaces. So I looked for a way to give the sans font a smaller default size. I couldn't find an example of such at http://wiki.contextgarden.net/simplefonts. I tried this: \setsansfont[Tex Gyre Heros][size=8pt] but it didn't seem to have any effect. Is there a way to do what I'm trying to do? I could use \switchtobodyfont[8pt] every time I go to sans, but I don't think that's the intention of simplefonts. Thanks, Lars

2 2

installing a true-type font: can't find ttf2afm
by Lars Huttar 06 Nov '13

06 Nov '13

Hi all, I'm following the instructions at http://wiki.contextgarden.net/Installing_a_TrueType_font,_step_by_step because I want to install a TTF (Gentium in fact) for ConTeXt to use. There is a warning that these instructions may be out of date, but I haven't found anything newer. This is under TeX Live 2013, the context scheme, and I've been using ConTeXt mkiv. I found texfont.pl, though it wasn't in the path, and managed to run it in the directory where I have my .ttf files: $ sudo PATH=$PATH /usr/local/texlive/2013/texmf-dist/scripts/context/perl/texfont.pl --ve=sil --co=gentium --makepath --install But then I get errors about ttf2afm: TeXFont 2.2.1 - ConTeXt / PRAGMA ADE 2000-2004 mktexlsr: Updating /usr/local/texlive/2013/../texmf-local/ls-R... mktexlsr: Done. encoding vector : texnansi vendor name : sil source path : . font collection : gentium texmf font root : /usr/local/texlive/2013/../texmf-local map file name : texnansi-sil-gentium.map source path : . processing files : all on afm path locating afm files : using pattern ./*.afm locating afm files : using ttf files generating afm file : ./GentiumPlus-I.afm sh: ttf2afm: command not found generating afm file : ./GentiumPlus-R.afm sh: ttf2afm: command not found copying files : afm copying files : pfb copying files : ttf copying : GentiumPlus-I.ttf copying : GentiumPlus-R.ttf processing aborted : no afm files found --help : show some more info I can't find ttf2afm anywhere. Is it part of pdfTex? Do I have to have the pdftex scheme installed in order to install True-type fonts? Thanks, Lars

4 11

Preventing caption stoppers from appearing in references
by Géry Ogam 06 Nov '13

06 Nov '13

Hello Hans, I would like to prevent caption stoppers from appearing in references in ConTeXt. Here is a minimal example: \starttext \setupcaptions[numberstopper=.~---~, distance=0em] \placefigure[][cow]{A Cow}{\externalfigure[cow]} \in{Figure}[cow] shows a cow. \stoptext Aditya suggested that I use suffix instead of numberstopper, which works very well, but Wolgang said: ‘I’m sorry to disappoint you but there is no official solution to achieve this. There are ways to change the stopper for section numbers in the heading and the text but not for the other counters (floats, descriptions etc.). The solution you got from Aditya at stackexchange works but it’s more a hack because suffixes are used when you use a splitted float (e.g. a table which spans multiple pages) where you get 1.a., 1.b etc. (the a and b are suffixes) as numbers.’ So since numberstoppers — of any kinds (for floats, sections, descriptions) — are supposed to separate numbers from titles, it would be logical that they don’t appear in references because references don’ have titles, only numbers, so no separation sign (numberstopper) is needed. Could you change that behaviour Hans, or add a command for setting the layout of the numbers in references (separators, counter conversion, etc.)? There is already such a command for section numbers and you only have to add another one for other counters. Best regards.

2 2

Aligning Part-Title in TOC
by "H. Özoguz" 06 Nov '13

06 Nov '13

Hello together, my question today is about aligning the part-title in the toc, see this simple example: \setuphead[part][number=no] \starttext \completecontent \part{Part 1: This is the title of the first part, it is very very long, but actually not a real title of a part in a book} \stoptext Whatever I try, using \crlf, \\, \blank[...] or anything else, I did not get the result of aligning I want. I want the title indented in the second line, as is is in the first line (so both lines have a left-offset to "Part 1"). For better understanding I attached a image with the intended result. How to do get this? Thanks alot. Huseyin

2 1

Sectioning from 0?
by Procházka Lukáš Ing. - Pontex s. r. o. 06 Nov '13

06 Nov '13

Hello, is it possible to force a section command to have its own number, e.g. 0? E.g.: ---- \section{A} \subsection{B} \subsection[ownnumber=0]{C} \subsection[ownnumber=XX]{D} ---- to produce: " 1 A 1.1 B 1.0 C 1.XX D " Maybe \start/stop-subsection would be better for this case... But how? Thanks in advance, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038

5 8

Counter resetting
by Géry Ogam 05 Nov '13

05 Nov '13

> It does not work (with ConTeXt ver: 2012.05.30): Finally it works with the last stable version of ConTeXt. Thank you very much Wolfgang.

1 0

Pdf bookmarks with meta-structure (frontmatter, bodymatter etc)
by pol stra 05 Nov '13

05 Nov '13

Hello, In my document, when I use a meta-structure, I only get "introduction" and "content" bookmarks, while not using a meta-structure, I have my part and chapter (which is the desired behaviour). How can I get the same behaviour in both structures? (by the way, how can I change the bookmarks of the table of contents, I tried \completecontent[bookmark=mytitle] and \setupcombinedlist[mytitle] without success). Thank you all Here is my sample code: \setupinteraction [state=start] \placebookmarks[part, chapter, section, title, subject][force=yes] \setupcombinedlist[content][ list={title, part, chapter, subject, subsubject, section, subsection}, alternative=c] \setuphead[part][placehead=yes, bodypartlabel=part] \startmode[meta] \startfrontmatter \startchapter[title={Introduction}] % \component c_introduction \stopchapter \completecontent[criterium=all] \stopfrontmatter \startbodymatter \startpart[title={part}] \startchapter[title={chapter1}] \stopchapter \stoppart \stopbodymatter \stopmode \startmode[nonmeta] \startchapter[title={Introduction}] % \component c_introduction \stopchapter \completecontent[criterium=all] \startpart[title={part}] \startchapter[title={chapter1}] \stopchapter \stoppart \stopmode

3 2

rpcode values in pure?
by john Culleton 05 Nov '13

05 Nov '13

In pdftex we have \rpcode and \lpcode. In context these values are already defined somewhere. What module/file contains the Context values for character protrusion? -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

How to test the emptyness of a variable?
by Géry Ogam 05 Nov '13

05 Nov '13

> you can try > > \doifnothing\currentstructurelabel{Do something} It does not work in my case (even if the currenstructurelabel is empty it acts as if it not empty). In fact I asked that to get the following behaviour: — When there is a chapter label (\setuplabeltext[chapter=CHAPTER~]) I want that: CHAPTER ONE Cool CHAPTER 2 Cat CHAPTER 3 Mouse etc. — When there is no chapter label (\setuplabeltext[chapter=]) I want that: 1 Cool 2 Cat 3 Mouse etc. E.g.: \setuplabeltext[chapter=CHAPTER~] \define[1] \MyCommand{\doifelse{\currentsectioncountervalue}{1}{ONE}{#1}} \setuphead[chapter][deepnumbercommand=\MyCommand] \starttext \chapter{Cool} \chapter{Cat} \chapter{Mouse} \stoptext

1 0

Counter resetting
by Géry Ogam 05 Nov '13

05 Nov '13

> You can use “way=byhead” to reset the counter with each section. > > Wolfgang It does not work (with ConTeXt ver: 2012.05.30): \defineenumeration[cool][text=Cool, way=byhead] \starttext \section{Cat} \subsection{Cat} \cool{} \cool{} \subsection{Cat} \cool{} \cool{} \section{Cat} \cool{} \cool{} Hello world! \stoptext

1 0