September 2019 - ntg-context - NTG Mailing Lists

Page number woes
by Mari Voipio 05 Sep '19

05 Sep '19

Hello! I have a document where I want the page numbers to start from the first page of chapter one. There's bunch of stuff before that, including a table of contents. This has worked fine: \startproduct prd-pr23 \startfrontmatter \setuppagenumber[stop] \component pr23-cover_front_web \component blank.tex \component c-contents \stopfrontmatter \startbodymatter \setuppagenumber[start] \component dtr_pg.tex \stopbodymatter \stopproduct However, now I need to switch to using a full-page pdf as cover page and changing that one line messes up with my page numbering, now TOC appears as page 1 and chapter one starts from page 2 in my test file. \startproduct prd-pr23 \startfrontmatter \setuppagenumber[stop] \startpagefigure[cover_vaisala_front_stripped]\stoppagefigure \component blank.tex \component c-contents \stopfrontmatter \startbodymatter \setuppagenumber[start] \component dtr_pg.tex % third chapter (DTR) \stopbodymatter \stopproduct What is it that I don't see? I tried moving the cover page before the \startfrontmatter, but that didn't change anything, TOC still starts on page 2 when it shouldn't have a page number at all. Why does switching the cover page from .tex to \pagefigure have such an effect and how can I counteract it? Mari (Obviously the real thing is a lot bigger, but the behaviour is the same. These are as close to MWE as I can get.)

2 2

Strange pagebreaks in LMTX
by Otared Kavian 05 Sep '19

05 Sep '19

Hi all, I have a document which typesets correctly in mkiv giving a PDF file with 7 pages, but the same document typeset with lmtx gives two pages with a strange pagebreak on the second page. Up to now, unfortunately, I could not create a minimal example to show this behaviour, so I put the files in the folder here: https://www.dropbox.com/sh/7rolmpe47njvy0l/AADmcILO0XgY3Sb6FC2dwMw-a?dl=0 and the PDF file obtained with mkiv is here https://www.dropbox.com/s/udbz0lulat9vum7/bug-pagebreaks-mkiv.pdf?dl=0 while the one obtained with lmtx is here https://www.dropbox.com/s/t6kge5lq8otju4y/bug-pagebreaks-lmtx.pdf?dl=0 Also, the TeX file typesets correctly with lmtx, if I don't use textrules, so I wonder whether there has been some changes in the way such textrules have to be used. As far as I can remember, two months ago the same file was typeset with lmtx without any problem. Thanks in advance for any help, Best regards: OK

5 8

Document with page 2 only
by Mikael P. Sundqvist 04 Sep '19

04 Sep '19

Hi, with a freshly updated ConTeXt-lmtx and the following document \starttext Hello World. \stoptext I end up with the following document, having a page 2 only. Log file is attached (says there are two pages). /Mikael

2 2

Re: [NTG-context] ntg-context Digest, Vol 183, Issue 4
by Jeong Dal 03 Sep '19

03 Sep '19

Dear Hans, By adding “setuptex” in the task file, it runs well and makes a pdf output. { "label": "ConTeXt Compile", "type": "shell", "command": "source ~/ConTeXtLMTX/tex/setuptex;context '${file}'", "args": [], "group": { "kind": "build", "isDefault": true } }, Thank you. Best regards, Dalyoung

2 3

13th ConTeXt meeting - final reminder!
by Taco Hoekwater 03 Sep '19

03 Sep '19

Hi all, This is a last reminder that the registration for the 13th ConTeXt meeting in Bassenge will remain open only until Sunday September 8. Two weeks from now we will be listening to the third talk of the first meeting day and so will be well on our way to learning all there is to know about the latest ConTeXt and LuaTeX developments. If you have not registered to the meeting, there are only five days left to decide to join us in our journey of discovery :) The updated schedule and registration information is available on the meeting website: https://meeting.contextgarden.net/2019/ Hope see many of you soon! Taco

1 0

Re: [NTG-context] How to use ConTeXt extensions with VS Code
by Jeong Dal 02 Sep '19

02 Sep '19

Dear Hans, > 2019. 8. 19. 오후 4:21, ntg-context-request(a)ntg.nl 작성: > > there is an vscode-context.cmd file > Where can I find a vscode-context.cmd file? I couldn’t locate it using google search. > this could also work: > >> mtxrun --script vscode --start > Thank you. Best regards, Dalyoung

3 7

Border in xtable
by Fabrice Couvreur 02 Sep '19

02 Sep '19

Hello, In the table below, why the border of the first line is not drawn ? Thank you Fabrice \definecolor[ColorA][0.8(white)] \definecolor[ColorB][0.9(white)] \starttext \startxtable [align={lohi,middle}, width=2cm,bodyfont=11pt] \startxrow[background=color,backgroundcolor=ColorA,foregroundstyle=white] \startxcell[width=10cm,nc=4] Variété A \stopxcell \stopxrow \startxrow[background=color,backgroundcolor=ColorB] \startxcell[width=4cm] Âge (en jours) \stopxcell \startxcell[background=color,backgroundcolor=white] 12 \stopxcell \startxcell[background=color,backgroundcolor=white] 20 \stopxcell \startxcell[background=color,backgroundcolor=white] 38 \stopxcell \stopxrow \startxrow[background=color,backgroundcolor=ColorB] \startxcell[width=4cm] Hauteur (en cm) \stopxcell \startxcell[background=color,backgroundcolor=white] 11 \stopxcell \startxcell[background=color,backgroundcolor=white] 15 \stopxcell \startxcell[background=color,backgroundcolor=white] 24 \stopxcell \stopxrow \stopxtable \stoptext

2 1

tikz problem with fontsize
by Martin Althoff 01 Sep '19

01 Sep '19

Hello all, I am trying to set the fontsize in a tikz image and that is failing. Strangely at the \node line with : ! Undefined control sequence. As the MWE stands now, it will fail. The now commented line works. main context file: /usr/local/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv current version: 2019.08.24 22:42 The fontsize statement work in kTikz. What to do? Are there other ways to change font size in the Context TikZ? Thanks for any input! Martin \usemodule[tikz] \starttext \starttikzpicture \tikzstyle{label}=[minimum size=30mm,line width=2mm,draw=blue!50,align=center,font=\fontsize{60}{60}\selectfont] %\tikzstyle{label}=[minimum size=30mm,line width=2mm,draw=blue!50,align=center] \node[label] at (1,1) {88} ; \stoptikzpicture \stoptext

4 6

Problem of installation of ConTeXt LMTX
by Atsuhito Kohda 01 Sep '19

01 Sep '19

Hi all, I try to install ConTeXt LMTX on (32 bit) Debian stable. Downloading context-linux-32.zip, I unzip it in /data/context (following the instruction of installation.pdf). Then I do ./install.sh but it seems the installation failed. The messages are as follows: mtx-install | invalid database ' http://lmtx.pragma-ade.com/install-lmtx//tex/texmf-linux.tma' mtx-install | current : %S ... mtx-install | running: /data/context/tex/texmf-linux/bin/mtxrun --generate sh: 1: /data/context/tex/texmf-linux/bin/mtxrun: not found mtx-install | running: /data/context/tex/texmf-linux/bin/context --make en sh: 1: /data/context/tex/texmf-linux/bin/context: not found mtx-install | mtx-install | tex/texmf : 0 files with 0 bytes installed mtx-install | tex/texmf-context : 0 files with 0 bytes installed mtx-install | mtx-install | update, done cp: '/data/context/tex/texmf-linux/bin/mtxrun' を stat できません: そのようなファイルやディレクトリはありません (this japanese sentence means, there is no such file or directory.) What is wrong here? Thanks in advance. Atsuhito Kohda

2 3

hypertarget and hyperlink in ConTeXt?
by Jon Wong 01 Sep '19

01 Sep '19

Hi all, Any way to do hypertarget and hyperlink in ConTeXt? From https://www.contextgarden.net/Command/textreference: <https://www.contextgarden.net/Command/textreference:> I see that the name of the anchor is also the displayed text (“houses”). Regards Jon

2 3