September 2014 - ntg-context - NTG Mailing Lists

Using PSTricks
by Herbert Voss 28 Sep '14

28 Sep '14

This example from m-pstricks.mkiv doesn't work, there is a missing file extension in m-pstricks.mkii: line 46 (macro \doifelse)is: \loadpstrickscolors{colo-rgb}} should be \loadpstrickscolors{colo-rgb.mkii}} otherwise it searches for colo-rgb.mkiv which doesn't exist. I do not understand why it searches for mkiv because in the background runs context mkii (started by by m-pstricks.lua). If I use the extension the follwing example works fine with current minimal: \usemodule[pstricks] \usePSTRICKSmodule[pst-barcode] \starttext \startPSTRICKS \pspicture(-4mm,-1mm)(38mm,26mm) \psbarcode[linecolor=red]{9781860742712}{includetext guardwhitespace}{ean13}% \endpspicture \stopPSTRICKS \stoptext Herbert

1 0

Re: [NTG-context] about Noto Sans CJK font problem
by Jeong Dal 28 Sep '14

28 Sep '14

I updated ConTeXt standalone again and test it. The result is same as before. In the log file, it located the font but it issues the luatex error. The font version is 1.001. The only difference of the luatex which I can see is that (mine: Standalone, rev 4972) and (Luigi’s: TeXLive 2014, rev 5041). Does it matter? I may test it under TeXLive 2014 which I need to install it. Thank you. Best regards, Dalyoung Test code: \definefont[test][file:NotoSansCJKkr-Thin.otf at 14pt] \starttext \test TeX uses different fonts for text and math, but it possible to replace certain characters in the math font with glyphs from a text font. 한글이 잘 되는지 모르겠네요. \stoptext Log file: mtx-context | run 1: luatex —fmt=“/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en” —jobname="test" --lua="/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1 --c:maxnofruns=8 "cont-yes.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/dev) (rev 4972) \write18 enabled. open source > 1 > 1 > /Users/graph/ConTeXt/tex/texmf-context/tex/context/base/cont-yes.mkiv ConTeXt ver: 2014.09.27 14:46 MKIV beta fmt: 2014.9.28 int: english/english system > 'cont-new.mkiv' loaded open source > 2 > 2 > /Users/graph/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > /Users/graph/ConTeXt/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > /Users/graph/Documents/TeXfiles/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded fonts > otf loading > loading '/Users/graph/Library/Fonts/NotoSansCJKkr-Thin.otf', hash 'notosanscjkkr-thin' fonts > otf loading > loading done fonts > otf loading > file size: 15177740 fonts > otf loading > fixing kernclass table of lookup 'pp_l_1_k_1' fonts > otf loading > 7 kern overloads ignored fonts > encoding > loading (extended) adobe glyph list fonts > otf loading > saving '/Users/graph/Library/Fonts/NotoSansCJKkr-Thin.otf' in cache system > lua > compiling '/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otf/notosanscjkkr-thin.tma' into '/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otf/notosanscjkkr-thin.tmc' system > lua > dumping '/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otf/notosanscjkkr-thin.tma' into '/Users/graph/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/fonts/otf/notosanscjkkr-thin.tmc' stripped fonts > otf loading > preprocessing and caching time 13.783, packtime 0.980 backend > xmp > using file '/Users/graph/ConTeXt/tex/texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1 close source > 2 > 3 > /Users/graph/Documents/TeXfiles/test.tex close source > 1 > 3 > /Users/graph/ConTeXt/tex/texmf-context/tex/context/base/cont-yes.mkiv mtx-context | fatal error: no return code, message: luatex: execution interrupted

1 0

about Noto Sans CJK font problem
by Akira Kakuto 27 Sep '14

27 Sep '14

> But I still get an error message which is as same as Luigi mentioned. Here the TeX Live 2014 version: 0.79.1 (rev 4971) does not work with the NotoSansCJKkr-Regular.otf. I'm using the current trunk version: 0.79.1 (rev 5041). Experimental version (rev 5057) will be better. Best, Akira

1 0

Re: [NTG-context] about Noto Sans CJK font problem
by Jeong Dal 27 Sep '14

27 Sep '14

> I have tested your source by installing NotoSansCJKkr-Regular.otf etc. > It seems to work OK. > Note that I'm using ".otf" fonts, not ".ttf" ones. > I attach cjkkrtest.tar.gz in which there are k.tex and k.pdf. > Your output is perfect. But I still get an error message which is as same as Luigi mentioned. Would you please send K.log file to compare with mine? > > luatex crashes with error message > mtx-context | fatal error: no return code, message: latex: execution > interrupted > > Under WINE (linux) mingw 64bit, > luatex.exe > Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5041) > is ok > > luatex.exe experimental is also also ok and both give the same result of > u.pdf My version of latex is This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/dev) (rev 4972) But it is not ok for me. Anyway, there is some problem in my TeX system rather than in the font. I’ll check it. I am using ConTeXt standalone in Mac Maveric. Thank you. Best regards, Dalyoung

2 1

Re: [NTG-context] about Noto Sans CJK font problem
by Akira Kakuto 27 Sep '14

27 Sep '14

> new beta ... it took me quite some tracing and time to figure out that > we can better ignore the Identity cidmap .. Thank you very much. The PDF is correct now with 1.001 HanSans CJK fonts. Best regards, Akira

2 1

Metafun error
by Willi Egger 27 Sep '14

27 Sep '14

Hello! Today I wanted to use an older tex file…. I get the same error as in the following test. \startuniqueMPgraphic{test} path p; p := fullcircle scaled 5cm; draw p; label.bot(textext("Centre"), center p); \stopuniqueMPgraphic \starttext \startTEXpage \useMPgraphic{test} \stopTEXpage \stoptext The error message is: Argument of \meta_start_environment has an extra } <inserted text> \par <to be read again> } \meta_handle_unique_graphic ...ocess_graphic {#3}} \setxvalue {\??mpgraphic \... \meta_use_graphic ...]}\getvalue {\??mpgraphic #1} \empty \meta_end_graphic_g... <to be read again> l.288 \useMPgraphic{test} This error occurs as well with version ConTeXt ver: 2014.08.29 20:57 as with the latest beta ConTeXt ver: 2014.09.26 11:42. Am I missing something? Kind regards Willi

2 4

about Noto Sans CJK font problem
by Akira Kakuto 27 Sep '14

27 Sep '14

Hi Hans, > ... ... > gives the same output here. You must be testing with the 1.000 fonts. Yes, version 1.000 fonts worked with the ConTeXt. Best, Akira

2 1

about Noto Sans CJK font problem
by Akira Kakuto 27 Sep '14

27 Sep '14

> However the resulting PDF shows incorrect characters. Incorrect characters are in "Hirakana" and "Katakana". The incorrect Japanese characters are also shown in the case of "SourceHanSans-Regular.otf", the same feature in the case of "NotoSansCJKjp-Regular.otf". On the other hand, if I use "SourceHanSansJP-Regular.otf", all characters seem to be correct. All fonts are version 1.001. In the case of XeTeX with the latest xdvipdfmx in the TL repository, "SourceHanSans-Regular.otf", "SourceHanSansJP-Regular.otf", and "NotoSansCJKjp-Regular.otf" give the same correct results. Best, Akira

3 2

Automatic reference prefixing in heads with prefix=+
by Christoph Reller 27 Sep '14

27 Sep '14

Hi, Various documents mention a namespace feature for references by setting prefix=+. This is a really cool feature but I cannot get it to work. Why does the following example not work: \setupinteraction[state=start] \setuphead[chapter][prefix=+] \starttext \startchapter[reference=chap1,title={First Chapter}] \startsection[reference=sec1,title={First Section in First Chapter}] Reference \type{sec1} is \about[sec1].\par Reference \type{chap2:sec1} is \about[chap2:sec1].\par \stopsection \stopchapter \startchapter[reference=chap2,title={Second Chapter}] \startsection[reference=sec1,title={First Section in Second Chapter}] Reference \type{sec1} is \about[sec1].\par Reference \type{chap1:sec1} is \about[chap1:sec1].\par \stopsection \stopchapter \stoptext Any help is appreciated. Christoph Reller

1 0

Re: [NTG-context] about Noto Sans CJK font problem
by Akira Kakuto 27 Sep '14

27 Sep '14

> There may be another problem which I don’t know. I have tested your source by installing NotoSansCJKkr-Regular.otf etc. It seems to work OK. Note that I'm using ".otf" fonts, not ".ttf" ones. I attach cjkkrtest.tar.gz in which there are k.tex and k.pdf. Best, Akira

1 0