May 2014 - ntg-context - NTG Mailing Lists

Re: [NTG-context] Hebrew vowel placement in ConTeXt.
by Michael Ash 02 May '14

02 May '14

Thank you. The unicode text looked good (although reversed left-to-right as I sent it) in my sent mail, and it looked perfect (corrected right-to-left) in your response. But it did not look good in the digest email (all the letters were convered to ?'s). Also it's typesetting fine in ConTeXt except for the vowel placement. Any suggestions there? Thank you again. Yours, Michael On Mon, Jun 17, 2013 at 12:22 PM, Idris Samawi Hamid ادريس سماوي حامد < ishamid(a)colostate.edu> wrote: > Greetings, Michael, > > > On Mon, 17 Jun 2013 10:15:11 -0600, Michael Ash <mash(a)econs.umass.edu> > wrote: > > Is there a standard way to send unicode text to this list? >> > > Your Unicode text came through perfectly: > > > \textdir TRT >> \hebrew >> לָכֵן חַכּוּ־לִי נְאֻם־יְהוָה לְיוֹם קוּמִי לְעַד כִּי מִשְׁפָּטִי >> לֶאֱסֹף גּוֹיִם לְקָבְצִי מַמְלָכוֹת לִשְׁפֹּךְ עֲלֵיהֶם זַעְמִי כֹּל >> חֲרוֹן אַפִּי כִּי בְּאֵשׁ קִנְאָתִי תֵּאָכֵל כָּל־הָאָרֶץ׃ >> \stoptext >> > > Maybe the encoding of your browser/mail-client needs to be set to > "Unicode" ("Automatic" usually works too). > > For high-level text-direction control, you may experiment with > > \righttoleft > \lefttoright > > as well as > > \setupdirections[bidi=global] > \setupdirections[bidi=local] > > Best wishes > Idris > -- > Professor Idris Samawi Hamid > Department of Philosophy > Colorado State University > Fort Collins, CO 80523 -- Michael Ash, Chair, Department of Economics Professor of Economics and Public Policy University of Massachusetts Amherst, MA 01003 Email mash(a)econs.umass.edu Tel +1-413-545-2590 Twitter @michaelaoash

4 6

tabulate: header not repeated
by Procházka Lukáš Ing. - Pontex s. r. o. 02 May '14

02 May '14

Hello, 'tabulate' header is not repeated across pages, the header appears only at the begin of the 'tabulate'. The code is based on http://wiki.contextgarden.net/Tabulate#Headers ---- \starttext \setuptabulate[split=yes,header=repeat] \starttabulatehead \HL \NC A \NC B \NC\NR \HL \stoptabulatehead \starttabulate[|l|l|] %\starttabulatebody \dorecurse{100}{\NC a \NC b \NC\NR} %\stoptabulatebody \stoptabulate \stoptext ---- Where is the problem? Best regards, Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 241 096 751 Fax: +420 244 461 038

2 2

Subsection number independant of section
by Fabrice Couvreur 02 May '14

02 May '14

Hi, I would get a dial like this : A. Section one 1. Subsection one With the code below, I get : A. Section one A. A. Subsection one \setupsection [section] [conversion=Character] \setuplabeltext [section={{},{.}}, subsection={{},{.}}] \setupsection [subsection] [previousnumber=no] \setupbodyfont[pagella,11pt] \starttext \section{Définitions} \subsection{Approche de la loi binomiale} \stoptext Why ? Regards, Fabrice

3 2

joinedup in itemize changed?
by Mikael P. Sundqvist 02 May '14

02 May '14

Hi, has joinedup changed? At the moment it gives no white space before first item and last item _and_ pack it. See example. Best regards, Mikael \starttext Bla \startitemize[3]%OK \item One \item Two \item Three \stopitemize Bla \startitemize[3,joinedup]% Not as expected \item One \item Two \item Three \stopitemize Bla \startitemize[3,packed]%OK \item One \item Two \item Three \stopitemize Bla \startitemize[3,packed,joinedup]%OK \item One \item Two \item Three \stopitemize Bla \stoptext

4 5

Re: [NTG-context] Lower the title of TOC
by "H. Özoguz" 02 May '14

02 May '14

> \definehead[contenttitle][title] > > \setuphead[contenttitle][before={\blank[force,2cm]}] > > \starttext > > \contenttitle{Contents} > > \placecontent > > \chapter{First chapter} > > \chapter{Second chapter} > > \stoptext > > Wolfgang Thanks Wolfgang, thats exactly what I was searching for! Huseyin

1 0

Lower the title of TOC
by "H. Özoguz" 02 May '14

02 May '14

Hi, how to lower the TOC-title, s.t. it begins with a greater distance to the top? Here a min-examlpe. \starttext \completecontent \chapter{Blub1} \chapter{Blub2} \stoptext I mean something like: \starttext \strut\blank[2cm] \completecontent \chapter{Blub1} \chapter{Blub2} \stoptext But of course that produce only an empty page before the TOC and can not work. How to achieve this correctly? Huseyin

2 1

too many open files?
by Andrea Valle 01 May '14

01 May '14

Dear, I’m compiling the new version of my manual on the SuperCollider language, using a project structure, and I’m including a lot of pdfs, as I’m automatically generating figures containing colorised code that have to included in the book. Btw I’m quite happy of the results! Thanks to devs for your work. Anyway, I’m stuck at this. I’m getting this error, seems related to the number of included pdfs </paperiProgetti/SC/introSC/code/controlli/map.pdfI/O Error: Couldn't open file '/paperiProgetti/SC/introSC/code/controlli/map.pdf': Too many open files. !LuaTeX error: xpdf: reading PDF image failed ==> Fatal error occurred, no output PDF file produced! What can I do? Thanks a lot, Best -a- -------------------------------------------------- Andrea Valle -------------------------------------------------- CIRMA - StudiUm Università degli Studi di Torino --> http://www.cirma.unito.it/andrea/ --> http://www.fonurgia.unito.it/andrea/ --> http://www.flickr.com/photos/vanderaalle/sets/ --> http://vimeo.com/vanderaalle --> andrea.valle(a)unito.it -------------------------------------------------- "This is a very complicated case, Maude. You know, a lotta ins, a lotta outs, a lotta what-have-yous." (Jeffrey 'The Dude' Lebowski)

2 2

Empty heads after leading whitespace
by Maggyero 01 May '14

01 May '14

> before=\empty, \empty is not even required. The problem with your solution (setting 'before=' i.e. empty) is that there is also no whitespace before a subsection which doesn't start on a new page. Any better ideas?

1 0

resize and center and clip image
by Mikael P. Sundqvist 01 May '14

01 May '14

Hi! Assume that I want to fill in the text area with images, and I want to clip and scale them according to these rules: 1) If the image is "too wide" (in sense of proportions), then scale it so that the height fits the text area height, center it, and clip it to the text area. (See the attached image, on top, where the blue area is supposed to show the text area and the red rectangle the image.) 2) If the image is "too high" (in sense of proportions), then scale it so that the width fits the text area width, center it, and clip it to the text area. (See the attached image, on bottom.) The background why I want to do this is that I'm making a small template for presentations, and I'd like the users to insert images as background without really having to think about if their proportions fit or not. Best regards, Mikael

4 7

automatically adding commands to some characters
by Pablo Rodriguez 01 May '14

01 May '14

Dear list, with slashes and en-dashes I experience the following in ConTeXt: sometimes I need to add an \hskip0pt command after them to allow linebreaks. One example would be "Council Directive 93/98/EEC". The issue comes when using ConTeXt as target format from markdown sources. pandoc generates the file, but it makes no sense to edit the ConTeXt source. Is there any command that allows the addition of arbitrary commands when a character appears in text? I mean, a way that internally replaces "Council Directive 93/98/EEC" with "Council Directive 93/\hskip0pt 98/\hskip0pt EEC" Many thanks for your help, Pablo -- http://www.ousia.tk

2 2