June 2013 - ntg-context - NTG Mailing Lists

Picture before chapter-title, but on same page
by "H. Özoguz" 04 Jun '13

04 Jun '13

Hello there, I want to place a picture at the top on a page, and directly after that a chapter-title (without a page break). I tried it with the key "continue", but that does not work. Here my try: \setuphead [chapter] [continue=yes] \starttext \startplacefigure [title={Some picture.}, reference=fig:demo, number=no] \externalfigure[picture][width=5cm] \stopplacefigure \chapter{Chapter-title} \stoptext How to correct it? Thanks! Huseyin

2 1

Problems with columns and grid
by Joshua Krämer 04 Jun '13

04 Jun '13

Hello list, in the following minimal working example (using Mark IV), the \column command is ignored. It works if the grid is disabled or balance=no is set. I need the grid, and regarding the balance: without balance, the columns use the whole type area height, but I want additional text to appear underneath the columns. The height parameter doesn't seem to control the columns' height. So my question is: How can I make \column to work or how can I at least set the column height as a workaround? \setuplayout[grid=yes] \starttext \startcolumns%[balance=no] left \column right 1\\right 2 \stopcolumns \stoptext Kind regards, Joshua

2 6

\getfiguredimensionsonly (mkiv)
by Peter Rolf 03 Jun '13

03 Jun '13

Hi, the macro \MPfigure in meta-fig.mkiv uses \getfig... , which seems to be undefined for mkiv. Best wishes, Peter

2 1

Re: [NTG-context] Centered title with numeration on the same line
by luigi scarso 03 Jun '13

03 Jun '13

On Mon, Jun 3, 2013 at 8:51 PM, honyk <j.tosovsky(a)email.cz> wrote: > Dear Luigi, > > The problematic part is that section title. The chapter title formatting > is Ok (but thanks for showing the way how to deal with these cases for > future uses). Applying deepnumbercommand to section didn't help to me... > I've used align=middle instead of alternative=middle in \setuphead[section] (in the first example I've used it for chapter) -- luigi

2 1

PDF X-3 format.
by john Culleton 03 Jun '13

03 Jun '13

Is there a way to convince Context to output a file in PDF X-3 format? Some of the newer presses and prepress software will accept this format and convert to CMYK automatically, and correctly for that particular press. Scribus will handle PDF X-3 output but seems to choke when long pdf files are imported. -- John Culleton Wexford Press Free list of books for self-publishers: http://wexfordpress.net/shortlist.html PDF e-book: "Create Book Covers with Scribus" available at http://www.booklocker.com/books/4055.html

2 1

Re: [NTG-context] Centered title with numeration on the same line
by luigi scarso 03 Jun '13

03 Jun '13

On Mon, Jun 3, 2013 at 8:07 PM, honyk <j.tosovsky(a)email.cz> wrote: > Marco, > > thanks a lot, it gives me exactly what I wanted! > > But to be honest, I expected a single option for this :-) > > \setuplabeltext[en][chapter=Chapter~] % while for chapter title this line break is handy (in my use case) \setuphead[chapter][ alternative=middle, style=\bfc, conversion=Romannumerals, numbercommand=\groupedcommand{\cap}{\blank[0.5cm]}, after={\blank[1cm]}, ] % for section it is inappropriate \setuphead[section][ align=middle, style=\bfa, sectionsegments=section, % ignore component label ] \starttext \chapter{Foo} \section{The First Section} Text. \stoptext But again, are you sure about the \cap command ? It also sets the CHAPTER as small caps . -- luigi

2 1

Re: [NTG-context] Centered title with numeration on the same line
by luigi scarso 03 Jun '13

03 Jun '13

On Mon, Jun 3, 2013 at 7:08 PM, honyk <j.tosovsky(a)email.cz> wrote: > Dear All, > > in MkIV when any title is centered, its numeration is placed on a separate > line above the title itself. > > I'd expect inline formatting which could be overridden as described here > http://wiki.contextgarden.net/Titles > > My code: > > \setuplabeltext[en][chapter=Chapter~] > > % while for chapter title this line break is handy (in my use case) > \setuphead[chapter][ > alternative=middle, > style=\bfc, > conversion=Romannumerals, > numbercommand=\groupedcommand{\cap}{\blank[0.5cm]}, > after={\blank[1cm]}, > ] > > % for section it is inappropriate > \setuphead[section][ > alternative=middle, > style=\bfa, > sectionsegments=section, % ignore component label > ] > > \starttext > \chapter{Foo} > \section{The First Section} > Text. > \stoptext > > How can I keep numeration and title together? > > Thanks, > Jan > > \setuplabeltext[en][chapter=Chapter~] % while for chapter title this line break is handy (in my use case) \setuphead[chapter][ align=middle, style=\bfc, conversion=Romannumerals, deepnumbercommand=\cap,% \groupedcommand{\cap}{\blank[0.5cm]}, after={\blank[1cm]}, ] % for section it is inappropriate \setuphead[section][ alternative=middle, style=\bfa, sectionsegments=section, % ignore component label ] \starttext \chapter{Foo} \section{The First Section} Text. \stoptext Maybe do you want deepnumbercommand ? (see the links for the difference numbercommand vs deepnumbercommand) -- luigi

2 1

Re: [NTG-context] Centered title with numeration on the same line
by Marco Patzer 03 Jun '13

03 Jun '13

On 2013–06–03 honyk wrote: > How can I keep numeration and title together? You can create a custom head alternative. The following code is copied from the source, I only replace the \par with \kern\headnumberdistance. Have a look at strc-ren.mkiv for other layouts. \setuphead [section] [alternative=middle_nolinebreak] \defineheadalternative [middle_nolinebreak] [alternative=vertical, renderingsetup=headrenderings:middle_nolinebreak] \startsetups[headrenderings:middle_nolinebreak] \vbox { \headsetupspacing \veryraggedcenter \let\\\endgraf \let\crlf\endgraf \ifconditional\headshownumber \strut \headnumbercontent \kern\headnumberdistance \fi \begstrut \headtextcontent \endstrut } \stopsetups \starttext \section{The First Section} \stoptext Marco

2 1

ToC - right-alignment of roman numerals
by honyk 03 Jun '13

03 Jun '13

Dear All, in fresh MkIV I use the following commands for building ToC, but I have no idea how to align the label (roman numeral) to the right. In addition, the specified width and distance seem to be somehow ignored so that label interferes with the title. \setuphead[chapter][conversion=Romannumerals] \setupheadnumber[chapter][48] \setupcombinedlist[content][ alternative=c, distance=1em, width=3cm, ] \starttext \completecontent \chapter{Foo} \chapter{Bar} \stoptext Here is the link with several screenshots of desired formatting: http://tex.stackexchange.com/questions/69559/align-the-roman-numbers-of-the- parts-in-toc Any hint is appreciated. Thanks, Jan

1 0

Indentation in floats
by Marco Patzer 03 Jun '13

03 Jun '13

Hi, how to disable indentation inside floats without using \noindenting each time? \setupindenting [yes, medium] \starttext \input ward \startplacefigure foo\par bar \stopplacefigure \startplacefigure alpha\par beta \stopplacefigure \startplacefigure \noindenting a manual\par\tex{noindenting}\par works \stopplacefigure \input ward \stoptext Marco

2 2