November 2011 - ntg-context - NTG Mailing Lists

formula placement
by Meer, H. van der 05 Nov '11

05 Nov '11

I find I get a fairly large whitespace after the formulas placed with: \placeformula\startformula <> \stopformula How can I reduce this? The wiki does not give a parameter description for \setupformulas. In the code I can only find some [distance=] parameter. But using it with for example \setupformulas[distance=-10pt] scored no visable effect. Hans van der Meer

2 1

reference bug: MkiV
by Idris Samawi Hamid ادريس سماوي حامد 05 Nov '11

05 Nov '11

Dear cabal, There seems to be a bug in MkIV: ============ \starttext This is a test \inoutermargin[ref]{test} As explained earlier (page \at[ref]) This is a test \inoutermargin[reference=reff]{test} As explained earlier (page \at[reff]) \stoptext ============ The reference is not generated in either method: ===========log========== check > missing or ungrouped '=' after 'ref' in line 2 (@@mcinoutermargin:) references > unknown reference [][ref] references > unknown reference [][reff] ======================== Please advise and Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

3 14

Re: [NTG-context] Problems with linespacing
by Jan Heinen 05 Nov '11

05 Nov '11

As a newby I am already able to do lot's of nice things with ConTeXt - but I am struggling with some basics: fonts and linespacing. Ok ... I have to learn more than I thought :-) 1. Where can I find the typescript for aller? Or do I have to write my own typescripts? 2. As a second font I am using Linux-libertine ... is there a typescript for this font anywhere too? Regards Jannis

2 1

Re: [NTG-context] Problems with linespacing
by Jan Heinen 05 Nov '11

05 Nov '11

Excuse me Wolfgang ... your typescript type-aller.mkii and type-aller.mkiv was already on my computer. I ran: first-setup.sh --modules=t-typescripts And then I compiled your code with: context test.tex \starttext \start \setupalign[right,broad]\definedfont[file:allerlt*default at 36pt]\setupinterlinespace Ich bin Blindtext. Von Geburt an. Es hat lange gedauert, bis ich begriffen habe, was es bedeutet, ein blinder Text zu wer wer wer wer wer wer wer wer wer wer wer keinen Sinn. Man wirkt hier und da aus dem Zusammenhang gerissen. Oft wird man gar nicht erst gelesen. Aber bin ich deshalb ein schlechter Text? Ich weiss, dass ich nie die Chance haben werde, im Stern zu erscheinen. \stop \stoptext The result: instead of the font aller the default-font (and fontsize) is used: The messages I got while compiling your example, you can find at the bottom of this post. Regards Jannis Janis@Heinen:~/Buero/ConText/Uebungen/test$ context x.tex mtx-context | run 1: luatex --fmt="/home/joerg/context/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en" --lua="/home/joerg/context/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en.lui" --backend="pdf" "./x.tex" \stoptext This is LuaTeX, Version beta-0.70.1-2011051923 (rev 4277) \write18 enabled. (x.tex ConTeXt ver: 2011.11.04 14:15 MKIV fmt: 2011.11.5 int: english/english system > cont-new.mkiv loaded (/home/joerg/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > x.top loaded (x.top) fonts > latin modern fonts are not preloaded languages > language en is active {/home/joerg/context/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) (/home/joerg/context/tex/texmf-context/tex/context/base/type-siz.mkiv) (/home/joerg/context/tex/texmf-context/tex/context/base/type-otf.mkiv) files > readfile > asked name: 'loc', not found {/home/joerg/context/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/home/joerg/context/tex/texmf/fonts/map/dvips/lm/lm-rm.map} fonts > virtual math > unable to resolve name mapsfromchar fonts > fallback modern rm 12pt is loaded fonts > defining > font with asked name 'allerlt' is not found using lookup 'file' fonts > defining > unknown font allerlt, loading aborted fonts > defining > unable to define allerlt as \**thedefinedfont** backend > xmp > using file '/home/joerg/context/tex/texmf-context/tex/context/base/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 )</home/joerg/context/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf> mkiv lua stats > used config file - selfautoparent:texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path - /home/joerg/context/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606 mkiv lua stats > resource resolver - loadtime 0.007 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 47 found files, scanned paths: mkiv lua stats > stored bytecode data - 302 modules, 63 tables, 365 chunks mkiv lua stats > cleaned up reserved nodes - 39 nodes, 9 lists of 427 mkiv lua stats > node memory usage - 2 glue, 2 penalty, 9 attribute, 27 glue_spec, 3 attribute_list mkiv lua stats > node list callback tasks - 6 unique task lists, 5 instances (re)created, 2440 calls mkiv lua stats > used backend - pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns - en::2 mkiv lua stats > callbacks - 2587 direct, 3036 indirect, 5623 total mkiv lua stats > randomizer - resumed with value 0.95138319626049 mkiv lua stats > lxml preparation time - 0.000 seconds, 0 nodes, 15 lpath calls, 0 cached calls mkiv lua stats > result saved in file - x.pdf mkiv lua stats > loaded fonts - 33 files: stmary10.afm lmmono12-regular.otf lmmono8-regular.otf lmmono9-regular.otf lmroman12-bold.otf lmroman12-regular.otf lmroman7-bold.otf lmroman7-regular.otf lmroman9-bold.otf lmroman9-regular.otf lmsans12-regular.otf lmsans8-regular.otf lmsans9-regular.otf eufb10.tfm eufb7.tfm eufm10.tfm eufm7.tfm msam10.tfm msam7.tfm msbm10.tfm msbm7.tfm lmex10.tfm lmmi12.tfm lmmi7.tfm lmmi9.tfm lmmib10.tfm lmmib7.tfm lmsy10.tfm lmsy7.tfm lmsy9.tfm rm-lmr12.tfm rm-lmr7.tfm rm-lmr9.tfm mkiv lua stats > fonts load time - 0.244 seconds mkiv lua stats > luatex banner - this is luatex, version beta-0.70.1-2011051923 (rev 4277) mkiv lua stats > control sequences - 31309 of 165536 mkiv lua stats > current memory usage - 31 MB (ctx: 31 MB) mkiv lua stats > runtime - 0.765 seconds, 1 processed pages, 1 shipped pages, 1.307 pages/second

2 1

placelist
by Willi Egger 05 Nov '11

05 Nov '11

Hi all, it sound strange but how do I get a TOC where only the sections are placed but not the subsections? The document contains exclusively sections and subsections. With \placecontent[level=section] I get as well the sections as also the subsections. Looking at examples on the wiki I think this should be the right command? Kind regards Willi

3 4

annotation MODULE BUG
by Idris Samawi Hamid ادريس سماوي حامد 04 Nov '11

04 Nov '11

Dear gang, especially Wolf-gang ;-) The annotation module seems to cancel indentation, so the paragraph after a note starts with no indentation. Regular inmargin etc does not have this problem: ============================= \usemodule[annotation] \define[2]\MymarginCommand {\inoutermargin[scope=local]{#2}} \setupindenting[medium,next,yes] \defineannotation [mymargin] [alternative=command, % display=yes, command=\MymarginCommand, indentnext=yes] \starttext \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \mymargin{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \dorecurse{4}{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \mymargin{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \dorecurse{4}{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \inmargin{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \dorecurse{4}{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \inmargin{This is a test of the annotation module and the indenting mechanism} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism} \dorecurse{4}{This is a test of the annotation module and the indenting mechanism} \stoptext ============================= The display=yes option brings back the indentation, but it creates another problem: whitespace. Please advise, thnx in advance, and Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

5 8

Fatal error
by Kip Warner 04 Nov '11

04 Nov '11

Hey list, I can't recall if either I explicitly changed something in my ConTeXt typesetting or if this happened with the most recent version of ConTeXt I pulled from Adam's PPA. I am using version 2011.11.02 20:10. Here is a minimal example: \definestartstop [CodeExample] [before={ \crlf \setupbackground[frame=on, before=\blank, after=\blank, corner=round, topoffset=0.5cm, leftoffset=0.5cm, rightoffset=0.5cm, bottomoffset=0.5cm] \startbackground \startlines }, after={ \stoplines \stopbackground \crlf }, commands={\setupalign[right]}, style=type] \starttext Hello World \startCodeExample \starttyping Hello World Again \stoptyping \stopCodeExample \stoptext Here is the output: $ context foo.tex resolvers | resolving | loading configuration file 'selfautodir:/share/texmf/web2c/contextcnf.lua' resolvers | resolving | loading configuration file '/usr/share/texmf/web2c/contextcnf.lua' mtx-context | run 1: luatex --fmt="/home/kip/.texmf-var/luatex-cache/context/e570cb3e0e3ab0118ca08dd148bbec7d/formats/cont-en" --lua="/home/kip/.texmf-var/luatex-cache/context/e570cb3e0e3ab0118ca08dd148bbec7d/formats/cont-en.lui" --backend="pdf" "./foo.tex" \stoptext This is LuaTeX, Version beta-0.71.0-2011101421 (rev 4358) \write18 enabled. resolvers > resolving > loading configuration file '/usr/share/texmf/web2c/contextcnf.lua' (foo.tex ConTeXt ver: 2011.11.02 20:10 MKIV fmt: 2011.11.2 int: english/english system > cont-new.mkiv loaded (/usr/share/texmf/tex/context/base/cont-new.mkiv system > beware: some patches loaded from cont-new.mkiv ) system > foo.top loaded (foo.top) fonts > latin modern fonts are not preloaded languages > language en is active {/usr/share/texmf/fonts/map/pdftex/context/mkiv-base.map} fonts > preloading latin modern fonts (second stage) (/usr/share/texmf/tex/context/base/type-siz.mkiv) (/usr/share/texmf/tex/context/base/type-otf.mkiv) files > readfile > asked name: 'loc', not found {/usr/share/texmf/fonts/map/dvips/lm/lm-math.map}{/usr/share/texmf/fonts/map/dvips/lm/lm-rm.map} fonts > defining > forced type afm of stmary10 not found fonts > defining > font with asked name 'stmary10' is not found using lookup 'file' fonts > virtual math > loading font LMMath7-Regular subfont 9 with name stmary10.afm at 458752 is skipped, not found fonts > defining > forced type afm of stmary10 not found fonts > defining > font with asked name 'stmary10' is not found using lookup 'file' fonts > virtual math > loading font LMMath9-Regular subfont 9 with name stmary10.afm at 589824 is skipped, not found fonts > defining > forced type afm of stmary10 not found fonts > defining > font with asked name 'stmary10' is not found using lookup 'file' fonts > virtual math > loading font LMMath12-Regular subfont 9 with name stmary10.afm at 786432 is skipped, not found fonts > fallback modern rm 12pt is loaded Underfull \hbox (badness 10000) in paragraph at lines 25--26 ! TeX capacity exceeded, sorry [input stack size=10000]. \obeylines ...andafter \def \activeendoflinetoken {\obeyedline } \dostarttyping ...f \currenttyping {#1}\obeylines \futurelet \nexttoken \dod... \obeyedline ...ed \t!line \empty \futurelet \next \dobetweenthelines \obeylines ...andafter \def \activeendoflinetoken {\obeyedline } \dostarttyping ...f \currenttyping {#1}\obeylines \futurelet \nexttoken \dod... \obeyedline ...ed \t!line \empty \futurelet \next \dobetweenthelines ... l.29 \stoptyping ! ==> Fatal error occurred, no output PDF file produced! mtx-context | fatal error: return code: 1 Any help appreciated. -- Kip Warner -- Software Engineer OpenPGP encrypted/signed mail preferred http://www.thevertigo.com

2 4

pdf hyperlinks
by Steffen Wolfrum 04 Nov '11

04 Nov '11

Hi, I wanted to use something like ... \def\gotoUserpage[#1]{\expanded{\goto{#1}[\userpage(#1)]}} ... to use it as "Keyword \gotoUserpage[Pagenumber]" in my index. But this try doesn't work. Anybody has an idea what is the correct code? Steffen

2 2

stacking marginal notes
by Idris Samawi Hamid ادريس سماوي حامد 04 Nov '11

04 Nov '11

Dear Syndicate, Does stacking work? I've never tried it before, but it would be a godsend to the current porting-to-mkiv project: ========================= \setupmargindata[inmargin][stack=yes] \setupmarginframed[inmargin][stack=yes] \starttext \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } % \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \stoptext \starttext \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } % \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \stoptext \starttext \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } % \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. }\inmargin{This is a test of the annotation module and the indenting mechanism.} \dorecurse{2}{This is a test of the annotation module and the indenting mechanism. } \dorecurse{4}{This is a test of the annotation module and the indenting mechanism. } \stoptext ========================= Here the marginal notes overlap. If I'm doing something wrong, please advise! Best wishes Idris -- Professor Idris Samawi Hamid, Editor-in-Chief International Journal of Shīʿī Studies Department of Philosophy Colorado State University Fort Collins, CO 80523

4 4

xtables
by Hans Hagen 04 Nov '11

04 Nov '11

Hi, I uploaded a new beta and also an updated xtables manual. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0