April 2009 - ntg-context - NTG Mailing Lists

mkiv beta
by Hans Hagen 21 Apr '09

21 Apr '09

new mkiv beta with some structure fixes -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

math symbol \doteq cause error in mk||
by Andy Wong 21 Apr '09

21 Apr '09

Hello, I use the context minimal with updating to lastest beta. when using $\doteq$ in my equation, texexec catch an error: ! Illegal unit of measure (pt inserted). <to be read again> = \buildrel ...mathrel {\mathop {\kern \zerocount #2 }\limits ^{#1}} l.3 Test $\doteq $ ? I check the definition in math-pln.mkii, the \doteq is defined as: \def\buildrel#1\over#2% {\mathrel{\mathop{\kern\zerocount#2}\limits^{#1}}} \def\doteq {\buildrel\textstyle.\over=} The problem seems caused by \zerocount. After comparing with the definition in math-pln.mkiv, I changed it to \zeropoint and texexec run successfully. Regards, Andy

2 2

framed text question
by Jos van Gisbergen 21 Apr '09

21 Apr '09

Hi, I have a question regarding framed text. To obtain framed verbatim text that breaks over pages, I use the macro \definetextbackground. I have encountered a slight problem, however: sometimes the upper part of the frame appears on the bottom of the page with no text in it (because there's not enough room). The strange thing is that if I comment out the setupcolors macro the problem disappears (in the example that is). I have included an example of this below. Run with texexec --pdf test.tex The version of texexec I'm using is: TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.2.4 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 tex : pdfeTeX, 3.141592-1.21a-2.2 (Web2C 7.5.4) context : ver: 2005.01.31 cont-en : ver: 2005.01.31 fmt: 2009.1.26 mes: english Thanks in advance Trychius ---------------------------------- test.tex ---------------------------------- \installlanguage[en] \setuppapersize[A4] \definelayout[myCustomLayout][ header=10mm, % height of header footer=10mm, % height of footer topspace=8mm, % space above header bottomspace=\topspace, % space below footer backspace=25mm, cutspace=20mm, width=middle, height=middle, marking=on, % enable the marking of text grid=yes, ] \setuplayout[myCustomLayout] \setuptyping[margin=10mm, space=off, % Do not show space characters explicitely color=black, % Color of verbatim text ] \setupcolors[state=start] \definetextbackground[FramedText][ location=paragraph, rulethickness=0.5pt, framecolor=red, background=color,backgroundcolor=yellow, leftoffset=1.0\bodyfontsize,rightoffset=1.0\bodyfontsize, topoffset=1.0\bodyfontsize,bottomoffset=1.0\bodyfontsize, frame=on] \starttext in this story took place, some of the most important mines of the Scottish coal beds had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which Now, at the time when the events related in this story took place, some of the most important mines of the Scottish coal beds had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which Now, at the time when the events related in this story took place, some of the most important mines of the Scottish coal beds had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which Now, at the time when the events related in this story took place, some of the most important mines of the Scottish coal beds had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In had been exhausted by too rapid working. In miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten \startFramedText \starttyping in this story took place, some of the most important mines of the Scottish coal beds had been exhausted by too rapid working. In the region which extends between Edinburgh and Glasgow, for a distance of ten or twelve miles, lay the Aberfoyle colliery, of which the engineer, James Starr, had so long directed the works. For ten years these mines had been abandoned. No new seams had been discovered, although the soundings had been carried to a depth of fifteen hundred or even of two thousand feet, and when James Starr had retired, it was with the full conviction that even the smallest vein had been completely exhausted. \stoptyping \stopFramedText \stoptext

2 1

setuplayout - chapter, toc, ... special treatment
by Thomas Prochaska 21 Apr '09

21 Apr '09

hi! I've a problem with the setuplayout command. is use the following command for the global text: \setuplayout[backspace=3cm,cutspace=2cm,width=16cm,topspace=2cm,header=0cm, textheight=fit,bottomspace=0cm,footerdistance=1cm,footer=0.5cm,footerspace=0cm, bottomdistance=0cm,bottom=0cm] but now the chapters, toc, lists, ... also start 2cm from the top edge of the paper. how can i alter it and such manner that these pages start with, let's say, 5cm from the top edge. regards thomas prochaska

2 2

no executesystemcommand any more?
by Henning Hraban Ramm 20 Apr '09

20 Apr '09

Ahoi, with the latest beta I can't get my LilyPond module to work. It seems that it's not possible to execute any command. I tried \executesystemcommand, \write18 and the old \installprogram. What should work? As far as I can see, shell_escape is enabled. (And it worked before.) Additionally I tried to replace the texmfstart call with mtxrun. While this works: texmfstart --ifchanged="foo-lilypond-1.tmp" --exec bin:lilypond "foo- lilypond-1.tmp" this doesn't: mtxrun --ifchanged="foo-lilypond-1.tmp" --execute lilypond "foo- lilypond-1.tmp" probably because mtxrun doesn't create a md5 file. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

3 6

missing command and wrong lists (index, ToC) in MkIV
by Henning Hraban Ramm 20 Apr '09

20 Apr '09

With the latest beta, ConTeXt doesn't know "\setupsectionblock" any more (don't know if it actually worked before, but ConTeXt didn't complain). Previously the lists stuff (ToC) didn't work, but that seems fixed now. But indexes are still a mess: Instead of page numbers I get some strange entries like "62.13.13", where the entry is on page 12: """ Inhalt 1.3.3, 2.4.4, 3.5.5, 4.6.6, 5.8.8, 6.9.9, 61.10.10, 62.12.12, 63.14.14, 64.15.15, 65.16.16, 66.17.17, 67.18.18, 68.20.20, 69.21.21, 1.23.23 Allen die willen naar Island gaan 4.7.7 Der Störtebeker 65.16.16 There were two lofty ships 62.13.13 """ This setup worked before: \def\TitelFrame#1{% \framed[width=\textwidth, height=7.5mm, frame=off, align={right,high}, after={}, before={}]% {\index{#1}\tfa #1}} \setuphead[Titel][page=yes, number=no, deeptextcommand=\TitelFrame] I.e. \Titel{Blah} should output the title "Blah" and also write it to the index. Instead I those entries seem collected in a "Inhalt" entry - I guess that's somehow caused by my combined list "inhalt": \definecombinedlist [inhalt] [Titel, TitelKlein, TitelNoPage] [level=Titel, placehead=yes, criterium=all, alternative=b, offset=none] \setupcombinedlist [inhalt] [partnumber=no] What can I do? Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer)

3 4

intertext problems with accents
by Xan 20 Apr '09

20 Apr '09

Hi, intertext with accents behaves wrongly: \startintertext Contando el número de subconjuntos $X \subseteq E$ de $n$ elementos \stopintertext puts me strange 'ú'. I have MKII. Can anyone verify this? Regards, Xan. Please CCme.

2 1

Unable to generate fonts
by Thomas A. Schmitz 20 Apr '09

20 Apr '09

> I've been running into trouble in both the alpha and beta versions of > Mark IV when trying to work with the fonts script: > > $ mtxrun --script fonts --list > MTXrun | font table: accessing the data table failed > MTXrun | font table: accessing the data table failed > ...text/tex/texmf-context/tex/context/base/font-syn.lua:333: attempt > to > index field 'data' (a nil value) > > Also, using the "reload" option does nothing (it prints a blank line > and > immediately exits). Without the fonts script I can't install or use > any > custom fonts. I'm experiencing the same problem here. context version: 2009.04.18 13:47 LuaTeX, Version snapshot-0.39.0-2009042009 luatex.web >= v2329 None of my custom fonts work; I get errors define font | font with name texgyretermesregular is not found define font | unknown font texgyretermesregular, loading aborted define font | unable to define texgyretermesregular as \**dummy** define font | font with name texgyretermesregular is not found define font | unknown font texgyretermesregular, loading aborted define font | unable to define texgyretermesregular as \**dummy** define font | font with name texgyretermesregular is not found define font | unknown font texgyretermesregular, loading aborted define font | unable to define texgyretermesregular as \**dummy** define font | font with name texgyretermesregular is not found define font | unknown font texgyretermesregular, loading aborted define font | unable to define texgyretermesregular as \**dummy** Thomas

3 5

Font table
by eythanweg＠gmail.com 20 Apr '09

20 Apr '09

Hi, I tried this mtxrun --verbose --reload --script fonts but it fails with: MTXrun | using script: /usr/local/share/texmf/scripts/context/lua/mtx-fonts.lua cannot open : No such file or directory I think that this line in mtx-fonts.lua is the culprit: dofile(resolvers.find_file("font-syn.lua")) although this file: font-syn.lua exists. Any hints Thank you, Eythan

4 16

Bib module in mkiv
by Taco Hoekwater 20 Apr '09

20 Apr '09

Hi, Hans sent me a patch for the bib module so that it now should work with the latest mkiv once again, but the code needs testing before being included in the context distribution, so please do so. You can get the new version of the module from http://modules.contextgarden.net/bib Note: you need the latest context beta, because the bib module required a small extension to the core. Best wishes, Taco

6 19