August 2006 - ntg-context - NTG Mailing Lists

indenting after section headings with before, after keyvals
by Sanjoy Mahajan 07 Aug '06

07 Aug '06

The text after section headings is normally not indented, even if \setupindenting[yes] is given -- which looks good and was a pain to get right in my plain TeX days. But the "don't indent that" code seems to get confused if before= and after= values are given in the heading setup. Below is a minimal example (using context 2006.07.24 10:49) showing that the 'before' hairline is indented, and the "Indented?" text after the 'after' hairline is indented. All is fine without the \setupindenting or the \setuphead line. Is there an easy fix that I missed? I tried throwing in \noindent into the before or after keys but no luck. \setuphead[section][before={\hairline\blank},after={\nowhitespace\hairline}] \setupindenting[medium,yes] \starttext \section{First} Indented? \stoptext

2 2

adding an icon (flushed left) in a displayed formula with equation number
by David Arnold 07 Aug '06

07 Aug '06

All, We have: \placeformula[eq:commonb] \startformula (1)^2+(\sqrt{4x+13})^2=(2x)^2, \stopformula This gives us a centered equation with an number pushed to the right edge of the page (I probably should say text area). What we'd like to do, just in this one example (not globally), is add a little "smiley face" icon on the same line as the displayed equation and equation number, but pushed to the left edge of the page (I probably should say text area). Possible?

3 2

visualising evolution from one version to another
by Peter Münster 07 Aug '06

07 Aug '06

Hello, if you know a bit MS-Word, then you have seen perhaps the feature, that permits visualising differences between 2 versions of a document: added text in red, and deleted text stroke out. I would like to make something similar with ConTeXt: making a pdf-file from doc-versionX.tex and doc-versionY.tex with added text in some colour and deleted text displayed with \overstrikes{}. Do you have some ideas, how to do that? Cheers, Peter -- http://pmrb.free.fr/contact/

3 5

metafun & \sometxt: should black be "black" or "textcolor"?
by Mojca Miklavec 07 Aug '06

07 Aug '06

Hello, Does anyone have any idea about what's going on here? I get blue text, but a black square, although both are supposed to come out black (I wouldn't mind so much, but the problem is that some text is blue and some is black - I have some other testcases where this happens, but I have to create a minimal example first). \setupcolors [state=start,textcolor=blue] \starttext \startMPcode draw \sometxt{abc} withcolor black; % come out blue draw \sometxt{def} shifted (3cm,0) withcolor red; draw unitsquare xyscaled (3cm,2cm) withcolor black; \stopMPcode \stoptext Thanks, Mojca

3 10

Black and White
by David Arnold 06 Aug '06

06 Aug '06

Hans et al, Is there switch to throw to texmfstart texexec so that interactive green links go a nice dark color when printed to black and white?

3 2

Re: [NTG-context] index (again)
by Hans Hagen 06 Aug '06

06 Aug '06

Steffen Wolfrum wrote: > It's not waterproof. > > See the result in the attached PDF: > > For example GOBReg > ... 230, 230, 230�233 ... > ... 273�277, 277� 279 ... > > And something else needs to be improved (that's why I send the PDF): > See the register is not typeset in columns properly?! i cannot reproduce that, so what exactly is the index definitions then? (can you make a test file ?) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com | www.pragma-pod.nl -----------------------------------------------------------------

1 0

Extra pages
by David Arnold 06 Aug '06

06 Aug '06

All, Can anyone explain why the output of this source has two blank pages at the end? \setupwhitespace[medium] \setupindenting[medium,yes] \setupcolors[state=start] \setuppagenumbering [state=start, alternative=doublesided, location=, way=bytext] \definetext[chapter][footer][pagenumber] \setuphead [chapter] [alternative=inmargin, header=high, footer=chapter, page=right] \setuphead [section] [style=\tfc, page=right, continue=no, alternative=inmargin] \setuphead [subsection] [style=\tfb\sl, number=no] \definehead [TocHead] [section] \setuphead [TocHead] [number=no, incrementnumber=no, page=no] \definehead [IndexHead] [section] \setuphead [IndexHead] [number=no, incrementnumber=no, page=yes] \def\Tindex#1{\index{#1}#1} \def\OddPageHeader{\bold{\pagenumber}\hskip 1em Chapter \headnumber [chapter] \getmarking[chapter][current]} \def\headermarkleft{\bold{\pagenumber}\headerskip{\sc\headerskip Chapter \headnumber[chapter]\headerskip\getmarking[chapter][current]}} \def\headermarkright{{\sc{}Section \headnumber[section]\headerskip \getmarking[section][current]}\headerskip\bold{\pagenumber}} \def\headerskip{\hskip 1em} \setupheadertexts [][\headermarkright] %odd page on right [\headermarkleft][] %even page on left \setuplist [section] [style=bold, color=red, alternative=c] \setuplist [subsection] [alternative=b] \starttext \startbodymatter \chapter{A Practice Chapter} \input knuth \TocHead{Table of Contents} \placecontent \section{First Section} Now is the \Tindex{time} for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. Now is the time for all good men to come to the aid of their country. \subsection{First Subsection} \dorecurse{3}{\input knuth \par} \section{Second Section} \dorecurse{3}{\input knuth \par} \subsection{Second Subection} \dorecurse{3}{\input knuth \par} \section{Third Section} \dorecurse{3}{\input knuth \par} \subsection{Third Subection} \dorecurse{3}{\input knuth \par} \stopbodymatter \startbackmatter \completeindex \stopbackmatter \stoptext

2 4

times bolditalic in chapter
by Steffen Wolfrum 06 Aug '06

06 Aug '06

Hi, probably very basic question. I need the chapter set in bold (and if necessary - see below - in bolditalic). How can this be done when using Times via \usetypescript[postscript] [\defaultencoding] ? \starttext \usetypescript[postscript][\defaultencoding] \setupbodyfont[postscript,10pt] \def\Textit{\groupedcommand\it\/} \def\ChapterStyle{% \switchtobodyfont[rm,20pt] \setupinterlinespace[line=30pt] } \setuphead[chapter] [alternative=paragraph,style=\ChapterStyle] text \chapter{bold heading \Textit{bold italic} bold heading} text \stoptext

2 1

Mixed Normal and Bold Math -- Problem with Lucida
by Renaud AUBIN 06 Aug '06

06 Aug '06

Hi all, I use lucida for a document and now I need some bold math fonts so I have followed the instructions given in "This Way - Mixed Normal and Bold Math". The resulting test file is: \starttext \usetypescript[lucida] [texnansi] \usetypescript[lucidabfm] [texnansi] \usetypescript[lucidaboldmath][texnansi] \setupformulas[method=bold] \startformula[lucida] 1 \Gamma \alpha x \stopformula \startformula[lucida] 1 \Gamma {\bfm \alpha x} \stopformula \startformula[lucidaboldmath] 1 \Gamma \alpha x \stopformula \startformula[lucidaboldmath] 1 \Gamma {\bfm \alpha x} \stopformula \stoptext I have installed lucida with texfont and added some .tfm (lucida.zip from Hans). Since I'm on debian, I've done some modifications to /etc/updmap.d/10tetex-base (I use tetex + latest ConTeXt in ~/texmf) + sudo update-updmap + sudo updmap-sys... \loadmapfile[texnansi-bh-lucida.map] is in my cont-sys.tex texexec gives: TeXExec | processing document 'lucidabfm.tex' TeXExec | no ctx file found TeXExec | tex processing method: context TeXExec | TeX run 1 TeXExec | writing option file lucidabfm.top TeXExec | using randomseed 1128 TeXExec | tex engine: pdfetex TeXExec | tex format: cont-en TeXExec | progname: context This is pdfeTeX, Version 3.141592-1.30.6-2.2 (Web2C 7.5.5) \write18 enabled. (/home/renaud/texmf/web2c/natural.tcx) entering extended mode (./lucidabfm.tex ConTeXt ver: 2006.07.28 23:56 fmt: 2006.8.1 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/home/renaud/texmf/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex color : palette rollover is available ) system : cont-old loaded (/home/renaud/texmf/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/home/renaud/texmf/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys loaded (/home/renaud/texmf/tex/context/user/cont-sys.tex (/home/renaud/texmf/tex/context/base/type-exa.tex) (/home/renaud/texmf/tex/context/base/type-syn.tex) (/home/renaud/texmf/tex/context/base/type-enc.tex) (/home/renaud/texmf/tex/context/base/type-siz.tex) (/home/renaud/texmf/tex/context/base/type-map.tex) (/home/renaud/texmf/tex/context/base/type-spe.tex) (/home/renaud/texmf/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns nl->texnansi:texnansi->1->2:3 nl->ec:ec->2->2:3 fr-> texnansi:texnansi->3->2:3 fr->ec:ec->4->2:3 de->texnansi:texnansi->5->2:3 de->e c:ec->6->2:3 it->texnansi:texnansi->7->2:3 it->ec:ec->8->2:3 pt->texnansi:texna nsi->9->2:3 pt->ec:ec->10->2:3 hr->ec:ec->11->2:3 pl->pl0:pl0->12->2:3 pl->ec:e c->13->2:3 pl->qx:qx->14->2:3 cz->il2:il2->15->2:3 cz->ec:ec->16->2:3 sk->il2:i l2->17->2:3 sk->ec:ec->18->2:3 sl->ec:ec->19->2:3 en->ec:ec->21->2:3 uk->ec:ec- >22->2:3 us->ec:ec->23->2:3 agr->agr:agr->24->2:3 da->ec:ec->25->2:3 sv->ec:ec- >26->2:3 af->ec:ec->27->2:3 no->ec:ec->28->2:3 deo->ec:ec->29->2:3 es->ec:ec->3 0->2:3 ca->ec:ec->31->2:3 la->ec:ec->32->2:3 ro->ec:ec->33->2:3 tr->ec:ec->34-> 2:3 fi->ec:ec->36->2:3 hu->ec:ec->37->2:3 loaded specials : tex,postscript,rokicki loaded system : lucidabfm.top loaded (./lucidabfm.top specials : loading definition file tpd (/home/renaud/texmf/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/home/renaud/texmf/tex/context/base/spec-fdf.tex) specials : fdf loaded ) specials : fdf,tpd loaded ) systems : system commands are enabled (/home/renaud/texmf/tex/context/base/sort-def.tex) (/home/renaud/texmf/tex/context/base/sort-lan.tex) systems : begin file lucidabfm at line 1 (/home/renaud/texmf/tex/context/base/type-buy.tex) (/home/renaud/texmf/tex/context/base/math-lbr.tex)kpathsea: Running mktextfm LucidaNewMath-Demibold /usr/share/texmf/web2c/mktexnam: Could not map source abbreviation L for LucidaNewMath-Demibold. /usr/share/texmf/web2c/mktexnam: Need to update /usr/share/texmf-tetex/fonts/map/fontname/special.map? mktextfm: Running mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input LucidaNewMath-Demibold This is METAFONT, Version 2.71828 (Web2C 7.5.4) kpathsea: Running mktexmf LucidaNewMath-Demibold ! I can't find file `LucidaNewMath-Demibold'. <*> ...; nonstopmode; input LucidaNewMath-Demibold Please type another input file name ! Emergency stop. <*> ...; nonstopmode; input LucidaNewMath-Demibold Transcript written on mfput.log. grep: LucidaNewMath-Demibold.log: Aucun fichier ou répertoire de ce type mktextfm: `mf-nowin -progname=mf \mode:=ljfour; mag:=1; nonstopmode; input LucidaNewMath-Demibold' failed to make LucidaNewMath-Demibold.tfm. kpathsea: Appending font creation commands to missfont.log. ! Font \*lucida7ptmmmrbfrm*:=LucidaNewMath-Demibold at 7.0pt not loadable: Metr ic (TFM) file not found. <to be read again> \relax \xxdododefinefont ...tspec {#4}\newfontidentifier \let \localrelativefontsiz... \dodosetmathfamilyB ...amily \fontsize \endcsname \else \ifcsname \fontclass... \dosetmathfamily ...athfamily \scriptscriptfont #1 \let \fontbody #3\dodosetm... <inserted text> ...scriptface \c!mrbf \mrfallback \dosetmathfamily \mibffam ... <inserted text> ...\else \the \boldmathstrategies \fi \autoenablemathcollect... ... l.6 \startformula[lucida] 1 \Gamma \alpha x \stopformula ? LucidaNewMath-Demibold.tfm ??? I really don't now where is the problem (maybe I'm too tired or I'm completelly dumb...) Commenting out \setupformulas[method=bold] gives a resulting pdf with LucidaNewMath-Demibold embedded-Subsetted. Only the last two lines contains bold symbols. The \bfm command has no effect on \alpha x (the second line). I assume that font-bfm.tex is loaded since there is no complains about \bfm def. type-exa is loaded (and consequently bfmath defined). At first, I believe that there is a problem with my debian map files or my lucida installation but it doesn't seems so after checking... Any idea ? Cheers, Renaud

4 8

Re: [NTG-context] russian
by Mojca Miklavec 05 Aug '06

05 Aug '06

I'm CC-ing this checklist about making new (Russian) hyphenation patterns work to the mailing list (also because a while ago I didn't manage to make them work either). Arkady Shraer wrote: > Yes, I replaced files from previous mail. While texexec --make --all I > saw, that lang-ru.* processed by ConTeXt. But in the log file (I > attached the full log) I cannot see if the "ru" language is loaded. > > In the output file text just ragged right as before -- no hypenation. OK, so once more a checklist for you. From the fact that you're a gmail user too I can imagine that you also got the files "garbled" just as I did (I mean: written inline instead of getting attachments unless you downloaded your mail with some program): 0. not necessary [texmfstart] ctxtools --update (although I had problems downloading the latest beta) 1. check if all the files are OK: - tex/context/patterns/lang-ru.hyp - tex/context/patterns/lang-ru.pat - new version of tex/context/base/lang-ctx.tex, has to include: \installlanguage [\s!ru] [\s!mapping=t2a,\s!encoding=t2a] (If you didn't get the files right, get them from a temporary location http://pub.mojca.org/tex/russian/lang-ru.zip) 2. I don't know when this is needed and when not, but it might be that you have to copy cont-usr.ori to cont-usr.tex and uncomment the following line: \installlanguage [\s!ru] [\c!state=\v!start] % russian (before I did that I couldn't make the Slovenian hyphenation work) 3. run mktexlsr (or I-forgot-the-synonym/other-command-if-this-doesn't-work) 4. [texmfstart] texexec --make --all > after "texmfstart texexec --make --all" I have > ConTeXt ver: 2006.07.24 10:49 fmt: 2006.7.27 int: english mes: english > Is it right? It's surely better than in one of the posts that you sent before this one ;) "fmt:" has to bear the date when you ran "texmfstart texexec --make --all". If that is older, the format file wasn't written to the right place. You seem to use Ubuntu. I don't know how things are configured there, but I had numerous problems under MikTeX. The reason was that "texexec --make --all" didn't have any influence there since a whole lot of environmental variables were missing (the standalone distribution doesn't have those problems). In general I would suggest you to put the content of scripts/context/stubs/unix to some "visible place", so that "texexec" will execute "texmfstart texexec", you can surely google a bit for it, there was also a discussion about installation on Ubuntu recently on the mailing list. 5. Here's what I did to get antykwa torunska (if you don't have it you can download it from here: http://www.janusz.nowacki.strefa.pl/torunska-e.html) \enableregime[utf] \mainlanguage[ru] \definetypeface [russian] [rm] [serif] [antykwa-torunska] [default] [encoding=t2a] \setupbodyfont[russian] (for computer modern it should be similar, but you need more than one line to set it properly; however if you managed to make it work already, your old file should already be OK) I hope that you'll find some hint in this, Mojca

1 0