ntg-context February 2006

ntg-context@ntg.nl

58 participants
120 discussions

Style won't load
by Elliot Clifton 02 Feb '06

02 Feb '06

I've written a new style but it won't load with \usemodule[race]. Error: system : module race not found File: s-race.tex File is in the search path How can I get this style to load? Do I have to register it with ConTeX? If so, how do I do that? Thanks in advance, Elliot

3 2

page float in columnset
by Vit Zyka 02 Feb '06

02 Feb '06

Hi wizards, let me go back to columnsets. I try to place a float spanning the whole page area. When doing that the running text placing exactly one page is completely and forever lost! Please see example: ----------------------------------------- \setuplayout[grid=yes] \showgrid \starttext \startcolumnset \dorecurse{4}{#1 --- \input knuth \blank\endgraf} \placefigure[here]{none}{% \framed [width=\makeupwidth,height=\textheight,offset=overlay] {Page float.}} \dorecurse{10}{#1 --- \input knuth \blank\endgraf} \stopcolumnset \stoptext ------------------------------------------- Switching here -> page, tops, ... does not solve the problem. The similar behaviour is observed when a float has one column width and fit the whole column height. Is there some solution or another way how to do that and preserve the text? Thanks Vit

2 7

definebodyfont vs. definebodyfontenvironment
by Thomas A. Schmitz 02 Feb '06

02 Feb '06

Dear wizards of ConTeXt, may I bother you with a small question about my typescripts (yes, that is a minor obsession with me...). I have two fonts defined in typescripts, font bar is scaled at a certain factor to match the size of font foo. If I specify an "unusual" size for the bodyfont (say 19.5pt), I have to put these lines in my preamble: \definebodyfontenvironment[19.5pt] \starttypescript [serif] [default] [size] \definebodyfont [19.5pt] [rm] [default] \stoptypescript and I get the output I want, but alas, not in the footnotes: there, font bar is not scaled. Would it help to add the size of the footnote font in these definitions explicitly? And what would this size be (I thought it was "small" which should default to 19.5/1.2=13.83, but adding 13.8pt didn't work)? I tried to read font-ini.tex, but this line {\doifdefined{\s!default########1####1} made my head explode... Thanks, and best Thomas

2 2

Short greek quote in otherwise english text
by Matthias Weber 02 Feb '06

02 Feb '06

Hello, I'd like to include a short quote in classical greek with all diacritics in a ConTeXt document which is otherwise plain english. What is a good way of doing this? Do I need to change the encoding? Thanks, Matthias

6 22

loadfontfileoncetrue
by David Arnold 02 Feb '06

02 Feb '06

All, I have a friend who is trying to compile one of my figure files and he crashes with the following error (winxp miktex 2.4): Anyone have any ideas? TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 unknown file type: texmfscripts kpsewhich: unrecognized option `--engine=pdfetex' fixing texformat path : Usage: kpsewhich [OPTION...] [FILENAME] This program tries to locate a TeXMF related file. Options: -alias=APP Pretend to be APP. -help Print this help screen and exit. -file-type=FILETYPE Use the search path for FILETYPE. -must-exist Make sure the file exists; run the package installer if necessary. -show-path=FILETYPE Show the search path for FILETYPE. -start Start associated program if file was found. -version Print the version number and exit. fixing engine variable : pdfetex executable : pdfetex format : cont-en inputfile : section1figs output : pdftex interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.141592-1.21a-2.2 (MiKTeX 2.4) entering extended mode (section1figs.tex ConTeXt ver: 2005.10.27 fmt: 2006.1.10 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (C:\texmf\tex\context\base\cont-new.tex systems : beware: some patches loaded from cont-new.tex color : palette rollover is available ) system : cont-old loaded (C:\texmf\tex\context\base\cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (C:\texmf\tex\context\base\cont-fil.tex loading : Context File Synonyms ) system : cont-sys.rme loaded (C:\texmf\tex\context\user\cont-sys.rme (C:\texmf\tex\context\base\./type-exa.tex) (C:\texmf\tex\context\base\./type-syn.tex) (C:\texmf\tex\context\base\./type-enc.tex) (C:\texmf\tex\context\base\./type-dis.tex) (C:\texmf\tex\context\base\./type-siz.tex) (C:\texmf\tex\context\base\./type-map.tex) (C:\texmf\tex\context\base\./type-spe.tex) (C:\texmf\tex\context\base\./type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:2 uk->ec:ec->2->2:2 de->texnansi:tex nansi->3->2:2 de->ec:ec->4->2:2 fr->texnansi:texnansi->5->2:2 fr->ec:ec->6->2:2 es->ec:ec->7->2:2 pt->texnansi:texnansi->8->2:2 pt->ec:ec->9->2:2 it->texnansi :texnansi->10->2:2 it->ec:ec->11->2:2 nl->texnansi:texnansi->12->2:2 nl->ec:ec- > 13->2:2 cz->il2:il2->14->2:2 cz->ec:ec->15->2:2 sk->il2:il2->16->2:2 > sk->ec:ec ->17->2:2 pl->pl0:pl0->18->2:2 pl->ec:ec->19->2:2 pl->qx:qx->20->2:2 loaded specials : tex,postscript,rokicki loaded system : section1figs.top loaded (./section1figs.top specials : loading definition file tpd (C:\texmf\tex\context\base\spec-tpd.tex specials : loading definition file fdf (C:\texmf\tex\context\base\spec-fdf.tex) specials : fdf loaded ) specials : fdf,tpd loaded ) color : system rgb is global activated (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) (./section1figs.tuo) systems : begin file section1figs at line 69 systems : randomizer starts with 1480761165 [MP section1figs-mpgraph.1] fonts : resetting map file list fonts : using map file: original-base fonts : using map file: ec-public-lm fonts : using map file: ec-base fonts : using map file: original-ams-base fonts : using map file: original-public-lm [1.1] [MP section1figs-mpgraph.2] (C:\texmf\tex\context\base\pdfr- ec.tex) [2.1] [MP section1figs-mpgraph.3] [3.1] [MP section1figs-mpgraph.4] [4.1] [MP section1figs-mpgraph.5] [5.1] [MP section1figs-mpgraph.6] [6.1] [MP section1figs-mpgraph.7] [7.1] [MP section1figs-mpgraph.8] [8.1] [MP section1figs-mpgraph.9] [9.1] [MP section1figs-mpgraph.10] [10.1] [MP section1figs-mpgraph.11] [11.1] [MP section1figs-mpgraph.12] [12.1] [MP section1figs-mpgraph.13] [13.1] [MP section1figs-mpgraph.14] [14.1] [MP section1figs-mpgraph.15] [15.1] [MP section1figs-mpgraph.16] [16.1] [MP section1figs-mpgraph.17] [17.1] [MP section1figs-mpgraph.18] [18.1] [MP section1figs-mpgraph.19] [19.1] [MP section1figs-mpgraph.20] [20.1] [MP section1figs-mpgraph.21] [21.1] [MP section1figs-mpgraph.22] [22.1] [MP section1figs-mpgraph.23] [23.1] [MP section1figs-mpgraph.24] [24.1] [MP section1figs-mpgraph.25] [25.1] [MP section1figs-mpgraph.26] [26.1] [MP section1figs-mpgraph.27] [27.1] [MP section1figs-mpgraph.28] [28.1] [MP section1figs-mpgraph.29] [29.1] [MP section1figs-mpgraph.30] [30.1] systems : end file section1figs at line 1264 [flush and process section1figs-mpgraph.mp afterwards] ) Output written on section1figs.pdf (30 pages, 12801 bytes). Transcript written on section1figs.log. return code : 0 run time : 5 seconds generating graphics : metaposting section1figs-mpgraph.mp TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 unknown file type: texmfscripts metapost to tex : section1figs-mpgraph 'mptotex' is not recognized as an internal or external command, operable program or batch file. metapost : section1figs-mpgraph format : metafun (section1figs-mpgraph.mpC:\texmf\miktex\bin\mpto.exe "C:\Book\IntAlgText\trunk\c hapter3\figures\section1figs-mpgraph.mp" >> "C:\DOCUME~1\Cricket\LOCALS~1\Temp\m pxB0EE.tmp\mpx314.tex" tex C:/DOCUME~1/Cricket/LOCALS~1/Temp/mpxB0EE.tmp/mpx314.tex This is TeX, Version 3.141592 (MiKTeX 2.4) (C:/DOCUME~1/Cricket/LOCALS~1/Temp/mpxB0EE.tmp/mpx314.tex ! Undefined control sequence. l.1 \global \loadfontfileoncetrue %

3 2

setupframedtexts
by Hans van der Meer 01 Feb '06

01 Feb '06

I guess I am getting a left margin when I enclose some text in a \framedtext and want to get rid of it. The manual gives as settable parameter "margin = standard,yes,no. However there is no visible effect when using "margin=no" in the setup. Inspecting the code for setupframedtexts I could not foun something like \c!margin. Is this an obsolete parameter? Or will it be implemented. yours sincerely, dr. H. van der Meer

3 5

How can I reset the height of a row in \bTABLE..\eTABLE?
by Pearson, Mark (Capita Symonds) 01 Feb '06

01 Feb '06

Hello All, The example below shows two tables. The first table has the height of its 1st row explicitly set, which then carries over to the second table causing the content to overflow the boundaries of the table. My question: Is there a way to either a) reset the row height for the second table using something like \setupTABLE[r][1][height=auto] or b) set the minimum height of a row e.g. \setupTABLE[r][1][minheight=3ex] so that the height is able to expand if necessary? I found a macro named \resetallTABLEparameters but it doesn't seem to have the desired effect. Thanks in advance, Mark Pearson \starttext \setupTABLE[r][1][height=1.5\lineheight] \bTABLE \bTR \bTD Cell 1 \eTD \bTD Cell 2 \eTD \eTR \eTABLE \blank[2*big] \bTABLE \bTR \bTD This is a table cell with a long section of text in it which I sincerely hope is going to force the table to resize accordingly \eTD \bTD This is another table cell with some text in it too \eTD \eTR \eTABLE \stoptext ********************************************************************************** This email and any files transmitted with it are confidential, and may be subject to legal privilege, and are intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error or think you may have done so, you may not peruse, use, disseminate, distribute or copy this message. Please notify the sender immediately and delete the original e-mail from your system. Computer viruses can be transmitted by e-mail. Recipients should check this e-mail for the presence of viruses. The Capita Group and its subsidiaries accept no liability for any damage caused by any virus transmitted by this e-mail. ***********************************************************************************

2 1

Still problem with \eqalign :(
by Matthias Weber 01 Feb '06

01 Feb '06

After downloading the release from yesterday, simple \eqalign's seem to work, but I run into problems with \starttext \placeformula[-] \startformula \eqalign{ c:[-1,1] &\to R^2 \cr t&\mapsto \left\{ \eqalign{ -(t^2,0) \qquad&\text{if $t\in[-1,0]$} \cr (0,t^2) \qquad&\text{if $t\in[0,1]$} } \right. } \stopformula \stoptext Log file below. Matthias TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 fixing engine variable : pdfetex executable : pdfetex format : cont-en inputfile : test output : pdftex interface : en current mode : none TeX run : 1 This is pdfeTeX, Version 3.141592-1.30.4-2.2 (Web2C 7.5.5) (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx) entering extended mode (./test.tex ConTeXt ver: 2006.01.31 16:39 fmt: 2006.2.1 int: english mes: english language : language en is active <protectionstate 0> system : cont-new loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-new.tex systems : beware: some patches loaded from cont-new.tex color : palette rollover is available ) system : cont-old loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-old.tex loading : Context Old Macros ) system : cont-fil loaded (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-fil.tex loading : Context File Synonyms ) system : cont-sys.rme loaded (/usr/local/teTeX/share/texmf.local/tex/context/user/cont-sys.rme (/usr/local/teTeX/share/texmf.local/tex/context/base/type-exa.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-syn.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-enc.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-siz.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-map.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-spe.tex) (/usr/local/teTeX/share/texmf.local/tex/context/base/type-akb.tex)) bodyfont : 12pt rm is loaded language : patterns en->ec:ec->1->2:3 uk->ec:ec->2->2:3 de- >texnansi:tex nansi->3->2:3 de->ec:ec->4->2:3 fr->texnansi:texnansi->5->2:3 fr- >ec:ec->6->2:3 es->ec:ec->7->2:3 pt->texnansi:texnansi->8->2:3 pt->ec:ec->9->2:3 it- >texnansi :texnansi->10->2:3 it->ec:ec->11->2:3 nl->texnansi:texnansi->12->2:3 nl->ec:ec- >13->2:3 cz->il2:il2->14->2:3 cz->ec:ec->15->2:3 sk->il2:il2->16- >2:3 sk->ec:ec ->17->2:3 pl->pl0:pl0->18->2:3 pl->ec:ec->19->2:3 pl->qx:qx->20->2:3 loaded specials : tex,postscript,rokicki loaded system : test.top loaded (./test.top specials : loading definition file tpd (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex specials : loading definition file fdf (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex) specials : fdf loaded ) specials : fdf,tpd loaded ) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./ test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./test.tuo) (./ test.tuo) (./test.tuo) systems : begin file test at line 1 ! Incomplete \ifnum; all text was ignored after line 15. <inserted text> \fi <to be read again> \endtemplate <template> {}}$\hfil \endtemplate <argument> ...mathalignmentparameter \c!distance & \tabskip \zeropoint \to \s... \ydorecurse ...el \let \recurselevel \!!plusone #2 \@EA \let \@EA \recurselev... \buildeqalign ...e \scratchtoks \the \!!toksb }}}} \expanded {\scratchtoks {\... ... l.15 } ? Process aborted

2 1

hyphenation exceptions
by Peter Münster 01 Feb '06

01 Feb '06

Hello, I don't want to tell TeX about hyphenation exceptions in the text, only once for all in an environment file. How can I do this with words like "DNA-Fragmente" or "$\beta$-Verknüpfung" ? \hyphenation{...} does not seem to work here, and I don't want to write DNA-Frag\-men\-te nor $\beta$-Ver\-knüp\-fung in the text. TIA for any help! Cheers, Peter -- http://pmrb.free.fr/contact/

4 5

publications doesn't appear in the toc
by Renaud AUBIN 01 Feb '06

01 Feb '06

Hi all, I use : TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 texexec : TeXExec 5.4.3 - ConTeXt / PRAGMA ADE 1997-2005 texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004 tex : pdfeTeXk, 3.141592-1.30.4-2.2 (Web2C 7.5.5) context : ver: 2006.01.28 10:09 cont-en : ver: 2005.10.27 fmt: 2005.12.2 mes: english total run time : 2 seconds with m-bib-beta-20051123b and my problem is that: % in environment \setupheadtext[fr][pubs=Bibliographie] % in a product \startfrontmatter ... \completecontent[alternative=c,criterium=all,interaction=all] ... \stopfrontmatter ... \startbackmatter % in a product \completepublications[criterium=all,interaction=all] \stopbackmatter doesn't give any "Bibliographie" entry when I call \completecontent I have read the bib user manual. It is said that the normal behavior of \completecontent + \completepublications gives an entry in toc... Cheers, Renaud

2 1

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

ntg-context February 2006