February 2003 - ntg-context - NTG Mailing Lists

compound titles, lists and headers
by Henning Hraban Ramm 26 Sep '10

26 Sep '10

Dear list, my publisher forces me to set different things as titles, in headers and table of contents. In some cases \nolist and \nomarking aren't enough. here are my actual definitions: ---- \def\Untertitel#1{\blank[3pt]{\ss\bf #1}\blank} % ok \def\Titel#1#2{{\nohyphens\chapter{#1}\Untertitel{#2}}} % ok \def\KomplexTitel#1#2#3{{\writetolist[chapter]{#3}\nohyphens\title{#1}\U ntertitel{#2}}} ---- with ---- \start \setupheadertexts[][manual entry][part][] % normally defined as [][chapter][part][] \KomplexTitel{Main chapter title}{chapter subtitle}{toc entry} Much text \stop % of other headertext ---- Real life example: \start \setupheadertexts [][Vorwort][][] \KomplexTitel{Die neutrale Schweiz und das globale Dorf}% {Vorwort von Prof.|~|Dr.|~|Heinrich Ott}% {Vorwort Prof.|~|Dr.|~|Heinrich Ott:\\Die neutrale Schweiz und das globale Dorf} ... Now there stay two issues: 1. I'd like to get a four-parameter command that can set the header text also. 2. I must get a line feed into the toc, but neither \\ nor \crlf works. Please help! Thanks. Grüßlis vom Hraban! -- www.fiee.net/texnique/ www.ramm.ch/context/

5 10

startappendices creates an extra empty page
by Rob van Swol 10 Jul '04

10 Jul '04

Hi, When is use \startappendices \stopappendices to create appendices, I get an extra empty page. Is there a way to solve this? If I put another chapter after the \stopappendices statement, then there is no empty page. See the following test: \setupoutput[pdftex] \starttext \chapter[]{Chapter} This a chapter \section[]{Section} This a section \startappendices \chapter[]{Appendix} This the appendix \stopappendices % \chapter[]{extra} % This extra \stoptext Any suggestions? Regards, Rob -- _____________________________________________________________ Rob W. van Swol National Aerospace Laboratory NLR Tel. +31 527 248252 P.O. Box 153 Fax +31 527 248210 8300 AD Emmeloord E-Mail vanswol(a)nlr.nl The Netherlands http://www.neonet.nl/

2 2

Re: bigger font families
by Hans Hagen 31 May '03

31 May '03

At 02:19 PM 4/1/2002 +0200, Henning Hraban Ramm wrote: >Ahoi! > >Is there a way for other type classes than roman, sans, math and mono? >E.g. I need sometimes an additional casual/script/handwriting font family >(think of Lucida...) and would like to address it as style=\hd or like that. > >I tried to define it with usual typescripts and "hand" instead of "sans" etc. >but had no success. If such *should* work, then I'll review it and look for >mistakes, but if it *can't* work I must abuse one of serif/sans/mono. > >An other way would be mapping the script font to an "exotic" style like >\sc\it -- what do you think? there is \hw and \cg for handwritten and calligraphy, and you can define more if you want (peek into font-ini.tex); also, in some type-* files you will find casuals; in principle you can create your own names (we do that for things like semi fonts), so we do things like: \definetypeface [mainfont] [rm] [serif] ... \definetypeface [semifont] [rm] [semi-serif] /... that's the nice thing of typefaces/scripts, that you can cook up your own names. the rm, ss, tt cg, hw entries are predefined which means that they will be recognized and have associated commands, if you want more (with as restiction that they should have two char names) you can define them with \definefontstyle; in a similar fashion you can define \tfp|q|r if you want or even map names onto families (math) etc etc Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- fall-back web server: www.pragma-ade.nl -------------------------------------------------------------------------

2 1

URL
by Michał Morawski 29 May '03

29 May '03

Hi, I want to see active URL in my pdf document in similar way that is used by <a....>....</a> tag in html So I have written \setupinteraction[state=start] then \useexternaldocument [doc:Molik] [http://zskl.zsk.p.lodz.pl/~morawski/local/Praca dyplomowa p. Molika.pdf] [Metody routingu unikastowego] then I try to use \from, \goto; \url and even if I see the link, it is not active then I try: \useURL [Molik] [http://zskl.zsk.p.lodz.pl/~morawski/local/Praca dyplomowa p. Molika.pdf] and \from, \goto; \url result is less or more the same. Where is the problem? What I have missed in documentation? Michal Morawski

5 6

Euler math again (virtually)
by Adam Lindsay 01 Apr '03

01 Apr '03

Hi all. I was wondering if anyone else was interested in the Euler math font. I was a bit frustrated in its incomplete coverage of certain symbols (e.g. delimiters, radicals), but then I discovered the Virtual Euler Math fonts/eulervm for LaTeX. It yields a set of virtual fonts (zeu*.vf) that make the glyph set look a lot like the default computer-modern math fonts. <http://www.ctan.org/tex-archive/help/Catalogue/entries/ eulervm.html?action=/tex-archive/fonts/> I've come up with a math collection (math-zeu) and a combined typescript file (type-zeu) that seem to give good enough results. Does anyone do enough math typesetting to want to test "zeuler" out? I've gotten good enough results this evening, but I don't have a lot of sophisticated formulae lying around to do a full test. Does anyone have some semi- demanding (non-AMS-territory) math for me to try? Cheers, adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Adam Lindsay +44(0)1524 594 537 atl(a)comp.lancs.ac.uk http://www.comp.lancs.ac.uk/computing/users/atl/ -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

6 29

lowerleftdoubleninequote
by Wolfgang Werners-Lucchini 17 Mar '03

17 Mar '03

Hallo! 'lowerleftdoubleninequote' in german seems to be an double lowerleftninequote, whereas 'upperrightdoublesixquote' seems to be the ligature. Wolfgang

4 9

typesetting chapter--label for cross references
by Guy Worthington 12 Mar '03

12 Mar '03

I'd like to display a cross reference, using a en-dash to separate the chapter number from the text being cross referenced. In the example below, if you look at label attached to the example caption "A Sample XML file," you'll see that it is typeset as Example~1--1 however if you look at the cross reference to the example, it is typeset as Example~1.1 how do I change the period (.) separator in the cross reference to an en-dash separator (--). ----- \defineenumeration [example] [location=serried, text=Example, before=\blank, after=\blank, way=bychapter, style=italic, separator=--] \starttext \chapter{One} \in{Example}[ex:Simple-doc] has the chapter number separated from the example number by a period, and not an en-dash. \example[ex:Simple-doc] A Sample XML file \startXML <?xml version="1.0"?> <?xml-stylesheet href="simple-doc.xsl" type="text/xsl"?> \stopXML \stoptext -----

2 2

problem with tables
by Martin Kolařík 12 Mar '03

12 Mar '03

Hi Hans, I've found the following problem after I instaled last beta. With my previous version (9,10/2002?) it worked fine. I can debug it on my side, but probably you find the cause and the solution more quickly: <...many lines of log...> ! Undefined control sequence. <argument> \localwidth \ExpandBothAfter ...anded {\noexpand #1{#2 }{#3}}\@@expanded \inTBLcell ...width {\v!passend ,\v!ruim } {} {\scratchdimen \gettbla... \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Undefined control sequence. <argument> ...L \relax \ifdim \localwidth >\scratchdimen \settblaut \... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... \eTABLE ...{\row }{\col }}}\eTBL }\endTBL \egroup \egroup \popTBL ... l.409 } ? ! Missing number, treated as zero. <to be read again> > <argument> ... \relax \ifdim \localwidth > \scratchdimen \settblaut \c... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Illegal unit of measure (pt inserted). <to be read again> > <argument> ... \relax \ifdim \localwidth > \scratchdimen \settblaut \c... \secondoftwoarguments #1#2->#2 \handleTBLcell ...CELL \inTBLcell {#1}{#2} }}\scratchdimen \gettblwid ... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Missing \cr inserted. <inserted text> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... \eTABLE ...{\row }{\col }}}\eTBL }\endTBL \egroup \egroup \popTBL ... l.409 } ? ! Missing } inserted. <inserted text> } <to be read again> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... \endTBL ...ltypesettingtrue \the \tbltoks }\ifautoTBLspread \checktbl... ... l.409 } ? ! Missing \cr inserted. <inserted text> \cr <to be read again> } <to be read again> \cr <to be read again> } \handleTBLcell ...LL \inTBLcell {#1}{#2}}} \scratchdimen \gettblwid \c... <inserted text> ...ttblcol \makeTBL {4}{3} \nexttblcol \makeTBL {4}{4}... ... l.409 } -------- Martin Kolarik Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302 tel. +420 603 498 498, fax +420 577 107 171 web: http://www.mii.cz -------- e-mail: kolarik(a)mii.cz e-mail: kolarik(a)click.cz tel. +420 603 535 593 -------- Martin Kolarik Moravske Pristroje, a.s., Masarykova 1148, Zlin 76302 tel. +420 603 498 498, fax +420 577 107 171 web: http://www.mii.cz -------- e-mail: kolarik(a)mii.cz e-mail: kolarik(a)click.cz tel. +420 603 535 593

3 11

Mac input encodings
by Adam Lindsay 12 Mar '03

12 Mar '03

Hi all, Prompted by this weekend's discussion of input regimes, I took a look at the one for the Mac's Western encoding (initiated by Michel Bovani), and hopefully revised it to be nearly complete for characters (missing four in the range 128-255). Mac users might like to take a look at this file, and verify that it does what I suggest. Usage: put the attached regi-mac.tex in your path, and either rebuild your format files (i.e., texexec --make ...), or explicitly \input this file in your source. Add the line "\enableregime[mac]" to your source. Type søme tèxt with «aççents» ånd öther odd characters. Does it work? Adam -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adam T. Lindsay atl(a)comp.lancs.ac.uk Computing Dept, Lancaster University +44(0)1524/594.537 Lancaster, LA1 4YR, UK Fax:+44(0)1524/593.608 -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

3 4

Re: [NTG-context] What DTD for a thesis
by Hans Hagen 12 Mar '03

12 Mar '03

At 10:55 AM 1/20/2003 +0100, you wrote: >Hi, > >I'm considering of writing a thesis using XML (instead of plain ConTeXt). >What DTD is best suited? The main point is good output, but I want to be >able to convert this document to e.g. HTML without too much hessle. > >I thought about using ContML + MathML, but I'd like to know whether you >have a better suggestion. contml sounds ok to me; we use it here in project for some big customers; if you need additional functionality, let me know ... [btw, there are xml interfaces for flowcharts, stepcharts, chemistry, units ...] Hans ------------------------------------------------------------------------- Hans Hagen | PRAGMA ADE | pragma(a)wxs.nl Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: +31 (0)38 477 53 69 | fax: +31 (0)38 477 53 74 | www.pragma-ade.com ------------------------------------------------------------------------- information: http://www.pragma-ade.com/roadmap.pdf documentation: http://www.pragma-ade.com/showcase.pdf -------------------------------------------------------------------------

6 19