- dev-context - NTG Mailing Lists

Combinations and \startcontent/\startcaption commands
by Wolfgang Schuster 30 Oct '12

30 Oct '12

Hi Hans, with the use of \stopcaption a visible space is added to the caption of the combination. Can you change the definition of the command from \let\stopcaption \egroup to \def\stopcaption {\unskip\egroup} or something similar. Example: \starttext \startcombination[2*1] {\framed{Content 1}}{Caption 1} {\framed{Content 2}}{Caption 2} \stopcombination \startcombination[2*1] \startcontent \framed{Content 1} \stopcontent \startcaption Caption 1 \stopcaption \startcontent \framed{Content 2} \stopcontent \startcaption Caption 2 \stopcaption \stopcombination \stoptext Wolfgang

2 1

spac-ali.mkiv
by Wolfgang Schuster 29 Oct '12

29 Oct '12

Hi, the \begingroup and \endgroup commands are not possible here because they are the delimiters for the \hbox. \def\doalignline#1#2% \\ == newline {\noindentation % was \noindent \dontleavehmode % added in marrakesch at TUG 2006\begingroup \begingroup \setlocalhsize % new - \def\\{\endgroup\par\doalignline{#1}{#2}\begingroup}% + \def\\{\egroup\par\doalignline{#1}{#2}\bgroup}% \dowithnextbox {\hbox to \localhsize {\ifcase\alignstrutmode\or\strut\fi \the\everyleftofalignedline #1\unhbox\nextbox#2\relax \the\everyrightofalignedline}% \endgroup} \hbox} \def\doxalignline#1#2#3#4#5#6% {\noindentation % was \noindent \dontleavehmode % added in marrakesch at TUG 2006\begingroup \begingroup \setlocalhsize - \def\\{\endgroup\par\doxalignline#1#2#3#4#5#6\begingroup}% inefficient + \def\\{\egroup\par\doxalignline#1#2#3#4#5#6\bgroup}% inefficient \dowithnextbox {\hbox to \localhsize {#1\hskip\ifdone#2\else#3\fi#4% \hbox to \localhsize {\the\everyleftofalignedline \ifcase\alignstrutmode\or\strut\fi \ifdone#5\unhbox\nextbox#6\else#6\unhbox\nextbox#5\fi \the\everyrightofalignedline}% \hss}% \endgroup} \hbox} Wolfgang

1 0

overrightarrow and underrightarrow give the same result
by luigi scarso 27 Oct '12

27 Oct '12

$\overrightarrow{ab}$ $\underrightarrow{ab}$ both give the same result ($\underrightarrow{ab}$) -- luigi

2 1

2 patches for grph-inc
by Peter Münster 21 Oct '12

21 Oct '12

Hi Hans, Could you please add these 2 patches (or something similar), because the grph-downsample module¹ would work much better then: 1.) To get the width and the height into the name of the file, because when the figure dimensions change, there must be a new conversion: --8<---------------cut here---------------start------------->8--- --- grph-inc.lua~ 2012-06-05 10:37:01.000000000 +0200 +++ grph-inc.lua 2012-07-31 22:40:39.214426838 +0200 @@ -528,6 +528,9 @@ if resolution and resolution ~= "" then -- the order might change newbase = newbase .. "_" .. resolution end + local width = figures.current().request.width + local height = figures.current().request.height + newbase = newbase .. "_" .. width .. "_" .. height -- -- see *, we had: -- --8<---------------cut here---------------end--------------->8--- 2.) To avoid crap in the width and height options: --8<---------------cut here---------------start------------->8--- --- grph-inc.mkiv~ 2012-07-20 23:26:52.000000000 +0200 +++ grph-inc.mkiv 2012-08-01 00:02:23.851094854 +0200 @@ -293,6 +293,10 @@ % \the\t_grph_include_local_settings \dostarttagged\t!image\empty + \edef\current_width{\externalfigureparameter\c!width}% + \edef\current_height{\externalfigureparameter\c!height}% + \def\nocrap##1{\doifnotemptyvalue{##1}{% + \the\dimexpr\csname##1\endcsname\relax}}% \ctxlua{figures.push { name = "\p_grph_include_name", label = "\p_grph_include_label", @@ -312,8 +316,8 @@ resolution = "\externalfigureparameter\c!resolution", color = "\internalspotcolorparent{\externalfigureparameter\c!color}", % hack is needed ["repeat"] = "\externalfigureparameter\c!repeat", - width = "\externalfigureparameter\c!width", % can be crap - height = "\externalfigureparameter\c!height", % can be crap + width = "\nocrap{current_width}", % no more crap + height = "\nocrap{current_height}", % no more crap } }% \ctxlua{figures.identify()}% % also mode: checkpresense only --8<---------------cut here---------------end--------------->8--- ¹ http://modules.contextgarden.net/grph-downsample TIA, -- Peter

2 6

Wrong counter settings
by Wolfgang Schuster 18 Oct '12

18 Oct '12

Hi Hans, in the following three files the additional check is necessary because otherwise changes for the counter (e.g. prefix=…) would also change the global counter settings from \setupstructurecounting. strc-not.mkvi: \appendtoks - \strc_notes_setup_counter\currentnotation + \ifx\currentnotation\empty \else + \strc_notes_setup_counter\currentnotation + \fi \to \everysetupnotation strc-enu.mkvi: \appendtoks - \strc_enumerations_setup_counter\currentenumeration + \ifx\currentenumeration\empty \else + \strc_enumerations_setup_counter\currentenumeration + \fi \to \everysetupenumeration strc-lab.mkvi \appendtoks - \strc_labels_setup_counter\currentlabel + \ifx\currentlabel\empty \else + \strc_labels_setup_counter\currentlabel + \fi \to \everysetuplabel In the following two files you can remove the \strc_counters_check_setup\… line because it’s already called from \strc_counter_setup_using_parameter in the previous line. strc-flt.mkvi: \appendtoks \let\currentfloat\currentfloatcaption \ifx\currentfloat\empty \else \strc_counter_setup_using_parameter\currentfloatcaption\floatcaptionparameter - \strc_counters_check_setup\currentfloatcaption \fi \to \everysetupfloatcaption strc-mat.mkiv: \appendtoks \strc_counter_setup_using_parameter\v!formula\formulaparameter - \strc_counters_check_setup\v!formula % yes or no \to \everysetupformula Wolfgang

2 1

\note doesn’t work when notes are placed in the text
by Wolfgang Schuster 17 Oct '12

17 Oct '12

Hi, in the following example the \note commands shows only unknown references. It has something to do with “location=text” because “location=page” or “location=column” have working references. \setupfootnotes[location=text] \starttext Second Note\note[footnote][2] First Note\note[footnote][1] \setnotetext[footnote][1]{Footnote 1} \setnotetext[footnote][2]{Footnote 2} Second Note\note[footnote][2] First Note\note[footnote][1] \placenotes[footnote] \stopfootnote I tried to find a fix for thus bug but wasn’t able to find a good solution. There is a little hack below which works (it is only used for “location=text” and “location=none”) but I guess there is a better solution. \unexpanded\setvalue{\??constructionnotehandler\v!notation:\v!note}% in the running text {\ifnotesenabled % do be done elsewhere % %let\currentnote\currentconstructionmain \let\currentnote\currentconstruction % else wrong inheritance % \iftrialtypesetting \strc_notes_inject_dummy \else \begingroup \edef\currentnotenumber{\ctxcommand{storenote("\currentnote",\currentconstructionlistentry)}}% \settrue\processingnote \ifconditional\c_strc_notes_skip \globallet\lastnotesymbol\strc_notes_inject_symbol + \ifconditional\c_strc_notes_delayed + \currentconstructionsynchronize + \fi \else \iftypesettinglines % otherwise problems with \type <crlf> {xxx} \ignorelines % makes footnotes work in \startlines ... \stoplines \fi \ifconditional\c_strc_notes_symbol \strc_notes_inject_symbol \else \unskip\unskip \globallet\lastnotesymbol\strc_notes_inject_symbol \fi \fi \ifconditional\postponingnotes % todo: per note class \global\settrue\postponednote \else\ifconditional\inlocalnotes % todo: per note class \global\settrue\postponednote \else \handlenoteinsert\currentnote\currentnotenumber % either an insert or just delayed \fi\fi \endgroup \fi \fi \ifconditional\c_strc_notes_skip \global\setfalse\c_strc_notes_skip \else \kern\notesignal\relax % \relax is needed to honor spaces \fi} Wolfgang

2 1

Subfootnotes
by Wolfgang Schuster 15 Oct '12

15 Oct '12

Hi Hans, subfootnotes don’t work because 1. \noteparameter has no parent set which can be used for undefined values which can be solved with the extra line in \strc_define_commands_notation \unexpanded\def\strc_define_commands_notation#1#2#3% current level parent {\doifelsenothing{#3} {\normalexpanded{\defineconstruction[#1][\s!handler=\v!notation,\c!level=#2]}% \setevalue{\??notation#1:\s!parent}{\??notation}}% {\normalexpanded{\defineconstruction[#1][#3][\s!handler=\v!notation,\c!level=#2]}% + \setevalue{\??note #1:\s!parent}{\??note #3}% \setevalue{\??notation#1:\s!parent}{\??notation#3}}% \setuevalue{\e!next #1}{\strc_notations_next }% \setuevalue{\c!reset#1}{\strc_notations_reset }% %setuevalue{\c!set #1}{\strc_notations_set }% %setuevalue {#1}{\strc_notations_command{\currentnotation}}% %setuevalue{\e!start#1}{\strc_notations_start {\currentnotation}{#1}}% \setuevalue {#1}{\strc_notations_command{#1}}% \setuevalue{\e!start#1}{\strc_notations_start {#1}{#1}}% okay? \setuevalue{\e!stop #1}{\strc_notations_stop }} 2. the name for the insert is wrong because it uses the name of the command (e.g. subfootnote) and not the name of the note type, e.g. in this code block \namedinsertionnumber and \page_inserts_set_location get “subfootnote” as argument but it has to be always “footnote”. \def\strc_notes_set_location_text % we don't use inserts anyway (e.g. endnotes) {\settrue\c_strc_notes_delayed \ctxcommand{setnotestate("\currentnote","store")}% \page_inserts_set_location\currentnote\v!text % \setupinsertion[\currentnote][\c!location=\v!text]% \global\count\namedinsertionnumber\currentnote\zerocount \global\dimen\namedinsertionnumber\currentnote\maxdimen \global\skip \namedinsertionnumber\currentnote\zeropoint} One way to fix is to store the note type in a key when \definenote is called (e.g. “insert=\currentote” but only when \footnote is created and not for \subfootnote) and use this key as argument for \namedinsertionnumber etc. Wolfgang

4 4

font-new.mkiv
by Wolfgang Schuster 15 Oct '12

15 Oct '12

Hi, \def\strc_formulas_handle_sub_numbering {\iftrialtypesetting \strc_counters_save\v!formula - \strc_formulas_handle_sub_numbering + \strc_formulas_handle_sub_numbering_indeed \strc_counters_restore\v!formula \else - \strc_formulas_handle_sub_numbering + \strc_formulas_handle_sub_numbering_indeed \fi} Wolfgang

2 1

pack-com.mkiv
by Wolfgang Schuster 14 Oct '12

14 Oct '12

Hi, a typo (missing “other” \pack_topofeach_two) in and to many hash signs: -\def\pack_topofeachother_one{\bgroup\setbox0\box\nextbox\dowithnextboxcs\pack_topofeach_two \hbox} +\def\pack_topofeachother_one{\bgroup\setbox0\box\nextbox\dowithnextboxcs\pack_topofeachother_two\hbox} \def\pack_sidebyside_one {\bgroup\setbox0\box\nextbox\dowithnextboxcs\pack_sidebyside_two\hbox} -\def\pack_topofeachother_two{\setbox2\box\nextbox\halign{\hss####\hss\cr\box0\cr\box2\cr}\egroup\egroup} -\def\pack_sidebyside_two {\setbox2\box\nextbox\valign{\vss####\vss\cr\box0\cr\box2\cr}\egroup\egroup} +\def\pack_topofeachother_two{\setbox2\box\nextbox\halign{\hss##\hss\cr\box0\cr\box2\cr}\egroup\egroup} +\def\pack_sidebyside_two {\setbox2\box\nextbox\valign{\vss##\vss\cr\box0\cr\box2\cr}\egroup\egroup} Wolfgang

1 0

symb-run.mkiv
by Wolfgang Schuster 06 Oct '12

06 Oct '12

Hi Hans, -\unexpanded\gdef\symb_show_set - {\dosingleargument\doshowsymbolset} +\unexpanded\gdef\showsymbolset + {\dosingleargument\symb_show_set} Wolfgang

1 0