- dev-luatex - NTG Mailing Lists

Fix typo in source/texk/web2c/luatexdir/tex/texnodes.c
by Josef Friedrich 14 Apr '23

14 Apr '23

diff --git a/source/texk/web2c/luatexdir/tex/texnodes.c b/source/texk/web2c/luatexdir/tex/texnodes.c index 6e0ae1ff8..72f6716dd 100644 --- a/source/texk/web2c/luatexdir/tex/texnodes.c +++ b/source/texk/web2c/luatexdir/tex/texnodes.c @@ -1203,7 +1203,7 @@ void l_set_whatsit_data(void) { the original one as a metatable. After some experiments (that also included timing) with these scenarios I decided that a deep copy made no sense, nor did nilling. In the end both the shallow copy and the metatable variant were - both ok, although the second ons is slower. The most important aspect to keep + both ok, although the second one is slower. The most important aspect to keep in mind is that references to other nodes in properties no longer can be valid for that copy. We could use two tables (one unique and one shared) or metatables but that only complicates matters.

2 1

Fix documentation for function `prepend_prevdepth` in node.* and node.direct.*
by Josef Friedrich 14 Apr '23

14 Apr '23

The function `prepend_prevdepth` is available in both namespaces, both node.* and node.direct.*. node.*: https://gitlab.lisn.upsaclay.fr/texlive/luatex/-/blob/master/source/texk/we… node.direct.*: https://gitlab.lisn.upsaclay.fr/texlive/luatex/-/blob/master/source/texk/we… diff --git a/manual/luatex-nodes.tex b/manual/luatex-nodes.tex index 9b72fdf2c..347987d41 100644 --- a/manual/luatex-nodes.tex +++ b/manual/luatex-nodes.tex @@ -2391,7 +2391,7 @@ consistency. You can of course always define additional accessors using \type \supported {mlist_to_hlist} \yes \nop \supported {new} \yes \yes \supported {next} \yes \nop -\supported {prepend_prevdepth} \nop \yes +\supported {prepend_prevdepth} \yes \yes \supported {prev} \yes \nop \supported {protect_glyphs} \yes \yes \supported {protect_glyph} \yes \yes

2 1

A possible bug in mixed directional typesetting
by Udicoudco 12 Apr '23

12 Apr '23

Hello all, Attached a file with what I believe to be a wrong output. Strangely, if I do one of the following steps, the last "ab" returns to the correct ocation (currently the last ab is at the left hand side bottom corner): * if I remove one of the "unnecessary" \textdir TLT * if I remove the grouping around \textdir TRT * if I add another group around {ab\texdir TRT ab}\textdir TLT I can reproduce this result on both miktex and texlive with LaTeX 1.16.0. Is this a bug? or am I somehow misusing the \textdir primitive? Regards, Udi

2 3

Correction of a typo in the manual
by Josef Friedrich 10 Apr '23

10 Apr '23

diff --git a/manual/luatex-languages.tex b/manual/luatex-languages.tex index 573727a66..9ca27a095 100644 --- a/manual/luatex-languages.tex +++ b/manual/luatex-languages.tex @@ -140,7 +140,7 @@ hyphenation happens is (normally) when the paragraph or a horizontal box is constructed. When \prm {savinghyphcodes} was zero when the language got initialized you start out with nothing, otherwise you already have a set. -When a \lpr {hjcode} is greater than 0 but less than 32 is indicates the +When a \lpr {hjcode} is greater than 0 but less than 32 it indicates the to be used length. In the following example we map a character (\type {x}) onto another one in the patterns and tell the engine that \type {œ} counts as one character. Because traditionally zero itself is reserved for inhibiting @@ -1110,4 +1110,3 @@ initialized due to \prm {savinghyphcodes} being larger than zero. % 12-34-\vrule width 1em height 1.5ex \par % 12-\hbox{34}-56 \par % 12-\vrule width 1em height 1.5ex-56 \par -

2 1

Documentation of the *_syntex_fields functions
by Josef Friedrich 08 Apr '23

08 Apr '23

The *_syntex_fields functions are located in the node.direct.* namespace, not in the node.* namespace. See source code: set_* https://gitlab.lisn.upsaclay.fr/texlive/luatex/-/blob/master/source/texk/we… get_* https://gitlab.lisn.upsaclay.fr/texlive/luatex/-/blob/master/source/texk/we… diff --git a/manual/luatex-nodes.tex b/manual/luatex-nodes.tex index 42a4aedc7..9b72fdf2c 100644 --- a/manual/luatex-nodes.tex +++ b/manual/luatex-nodes.tex @@ -2490,9 +2490,9 @@ number, for a glue, kern, hlist, vlist, rule and math nodes as well as glyph nodes (although this last one is not used in native \SYNCTEX). \startfunctioncall -node.set_synctex_fields(<integer> f, <integer> l) +node.direct.set_synctex_fields(<integer> n, <integer> f, <integer> l) <integer> f, <integer> l = - node.get_synctex_fields(<node> n) + node.direct.get_synctex_fields(<integer> n) \stopfunctioncall Of course you need to know what you're doing as no checking on sane values takes

2 1

[set|get]omitinfodict -> [set|get]omitinfo
by Josef Friedrich 06 Apr '23

06 Apr '23

diff --git a/manual/luatex-backend.tex b/manual/luatex-backend.tex index e53a81367..672288d45 100644 --- a/manual/luatex-backend.tex +++ b/manual/luatex-backend.tex @@ -125,7 +125,7 @@ after the \PDFTEX\ equivalents. \stopsubsection \startsubsection[title={\type {[set|get]suppressoptionalinfo}, \type {[set|get]trailerid}, -\type {[set|get]omitcidset}, \type {[set|get]omitinfodict} and \type {[set|get]omitmediabox}}] +\type {[set|get]omitcidset}, \type {[set|get]omitinfo} and \type {[set|get]omitmediabox}}] \topicindex{\PDF+options} \topicindex{\PDF+trailer} @@ -134,7 +134,7 @@ after the \PDFTEX\ equivalents. \libindex{gettrailerid} \libindex{settrailerid} \libindex{getomitcidset} \libindex{setomitcidset} \libindex{getomitcharset} \libindex{setomitcharset} -\libindex{getomitinfodict} \libindex{setomitinfodict} +\libindex{getomitinfo} \libindex{setomitinfo} \libindex{getomitmediabox} \libindex{setomitmediabox} The optional info bitset (a number) determines what kind of info gets flushed.

2 1

Possible double use of inserts
by Martin Münch 05 Apr '23

05 Apr '23

May the file LuaInsert.tex consist of \documentclass{minimal} \makeatletter \newcommand{\stressInsert}[1]{% \@tempcnta=0\relax% \@whilenum\the\@tempcnta<#1\do% {\advance\@tempcnta +1\relax% \expandafter\newinsert\csname TestInsert\the\@tempcnta\endcsname% \message{insert \the\@tempcnta: \the\allocationnumber^^J}% }% } \makeatother \stressInsert{70000} \begin{document} \end{document} then > lualatex LuaInsert.tex creates LuaInsert.log, which also contains: This is LuaHBTeX, Version 1.16.0 (TeX Live 2023) (format=lualatex 2023.4.4) ... \TestInsert1=\insert199 insert 1: 199 \TestInsert2=\insert198 insert 2: 198 ... \TestInsert17=\insert183 insert 17: 183 [ *** 1st JUMP HERE *** ] \TestInsert18=\insert252 insert 18: 252 \TestInsert19=\insert251 insert 19: 251 ... \TestInsert68=\insert202 insert 68: 202 \TestInsert69=\insert201 insert 69: 201 [ *** 2nd JUMP HERE *** ] \TestInsert70=\insert65534 insert 70: 65534 \TestInsert71=\insert65533 insert 71: 65533 ... \TestInsert65350=\insert254 insert 65350: 254 \TestInsert65351=\insert253 insert 65351: 253 \TestInsert65352=\insert252 [ *** AGAIN?! ***] insert 65352: 252 \TestInsert65353=\insert251 [ *** AGAIN?! ***] insert 65353: 251 ... \TestInsert65368=\insert236 [ *** AGAIN?! ***] insert 65368: 236 \TestInsert65369=\insert235 [ *** AGAIN?! ***] insert 65369: 235 ! No room for a new \count . \ch@ck ...\else \errmessage {No room for a new #3} \fi l.12 \stressInsert{70000} ? x So, are \insert252 to \insert235 used twice?! And Lua does not even stop there because of "No room for a new insert", but because there is no room for a new \count! Otherwise more inserts would see double use? Should after \insert253 (!, not 235) the next \newinsert produce some error "No room for a new \insert"?

2 2

Typos, whitespace issue in the manual and in the C source code
by Josef Friedrich 04 Apr '23

04 Apr '23

diff --git a/manual/luatex-backend.tex b/manual/luatex-backend.tex index afbaa84d0..e53a81367 100644 --- a/manual/luatex-backend.tex +++ b/manual/luatex-backend.tex @@ -619,12 +619,11 @@ pdfe.getstatus(<pdfe document>) The returned codes are: - \starttabulate[|c|l|] \DB value \BC explanation \NC \NR \TB \NC \type {-2} \NC the document is (still) protected \NC \NR -\NC \type {-1} \NC the document failed to open \NC \NR +\NC \type {-1} \NC the document failed to open \NC \NR \NC \type {0} \NC the document is not encrypted \NC \NR \NC \type {1} \NC the document has been unencrypted \NC \NR \LL @@ -943,7 +942,7 @@ pdfscanner.scan (<pdfe array>, <table> operatortable, <table> info) pdfscanner.scan (<string>, <table> operatortable, <table> info) \stopfunctioncall -The first argument should be a \LUA\ string or a stream or array onject coming +The first argument should be a \LUA\ string or a stream or array object coming from the \type {pdfe} library. The second argument, \type {operatortable}, should be a \LUA\ table where the keys are \PDF\ operator name strings and the values are \LUA\ functions (defined by you) that are used to process those operators. diff --git a/manual/luatex-fontloader.tex b/manual/luatex-fontloader.tex index 0a830ed00..1e12b61f1 100644 --- a/manual/luatex-fontloader.tex +++ b/manual/luatex-fontloader.tex @@ -225,7 +225,7 @@ by fontloader while applying the AFM file. On success, \type {nil} is returned. As mentioned earlier, the return value of \type {fontloader.open} is a userdata object. One way to have access to the actual metrics is to call \type {fontloader.to_table} on this object, returning the table structure that is -explained in the following sections. In teh following sections we will not +explained in the following sections. In the following sections we will not explain each field in detail. Most fields are self descriptive and for the more technical aspects you need to consult the relevant font references. @@ -911,7 +911,7 @@ space|-|separated string of glyph names in this class. \startsubsection[title={\type {math}}] -The math table has the variables that are also discussed in the chapter aboout +The math table has the variables that are also discussed in the chapter about math: \type {ScriptPercentScaleDown}, \type {ScriptScriptPercentScaleDown}, \type {DelimitedSubFormulaMinHeight}, \type {DisplayOperatorMinHeight}, \type {MathLeading}, \type {AxisHeight}, \type {AccentBaseHeight}, \type @@ -971,7 +971,6 @@ The \type {scripts} subtable: \LL \stoptabulate - The \type {lang} subtable: \starttabulate[|l|l|p|] diff --git a/source/texk/web2c/luatexdir/font/writettf.c b/source/texk/web2c/luatexdir/font/writettf.c index cf034e98d..6270cbf04 100644 --- a/source/texk/web2c/luatexdir/font/writettf.c +++ b/source/texk/web2c/luatexdir/font/writettf.c @@ -1518,7 +1518,7 @@ static void do_writeotf(PDF pdf, fd_entry * fd) if (tracefilenames) tex_printf("<<%s", cur_file_name); ttf_read_tabdir(); - /*tex Read teh font parameters. */ + /*tex Read the font parameters. */ if (ttf_name_lookup("head", false) != NULL) ttf_read_head(); if (ttf_name_lookup("hhea", false) != NULL) @@ -1570,4 +1570,3 @@ void writeotf(PDF pdf, fd_entry * fd) xfree(ttf_buffer); cur_file_name = NULL; } -

2 2

Typo in the manual
by Josef Friedrich 02 Apr '23

02 Apr '23

diff --git a/manual/luatex-nodes.tex b/manual/luatex-nodes.tex index 1b7325ac5..42a4aedc7 100644 --- a/manual/luatex-nodes.tex +++ b/manual/luatex-nodes.tex @@ -1321,7 +1321,7 @@ creates a node at the \TEX\ level. \libindex{flush_node} \libindex{flush_list} -The next one the node \type {n} from \TEX's memory. Be careful: no checks are +The next one removes the node \type {n} from \TEX's memory. Be careful: no checks are done on whether this node is still pointed to from a register or some \type {next} field: it is up to you to make sure that the internal data structures remain correct.

2 1

Duplicate line in luafflib.c
by Josef Friedrich 01 Apr '23

01 Apr '23

diff --git a/source/texk/web2c/luatexdir/luafontloader/src/luafflib.c b/source/texk/web2c/luatexdir/luafontloader/src/luafflib.c index 434413b00..41e5c3a32 100644 --- a/source/texk/web2c/luatexdir/luafontloader/src/luafflib.c +++ b/source/texk/web2c/luatexdir/luafontloader/src/luafflib.c @@ -1236,7 +1236,6 @@ static void handle_pfminfo(lua_State * L, struct pfminfo pfm) dump_intfield(L, "vlinegap", pfm.vlinegap); dump_intfield(L, "hhead_ascent", pfm.hhead_ascent); dump_intfield(L, "hhead_descent", pfm.hhead_descent); - dump_intfield(L, "hhead_descent", pfm.hhead_descent); dump_intfield(L, "os2_typoascent", pfm.os2_typoascent); dump_intfield(L, "os2_typodescent", pfm.os2_typodescent); dump_intfield(L, "os2_typolinegap", pfm.os2_typolinegap);

2 1