- dev-luatex - NTG Mailing Lists

duplicated /MediaBox entry if pageattr is used
by Ulrike Fischer 20 Jan '23

20 Jan '23

In pdftex "if the \pdfpageattr value contains the string /MediaBox, then pdfTEX omits outputting its own /MediaBox value". That means that the following produce a PDF with only one /MediaBox in the page dictionary: \pdfcompresslevel0 \pdfobjcompresslevel0 \pdfpageattr{/MediaBox [0 0 200 300]} abc \bye The same is not true for luatex: \pdfvariable compresslevel = 0 \pdfvariable objcompresslevel = 0 \pdfvariable pageattr{/MediaBox [0 0 200 300]} abc \bye leads to two entries (using pdf.setpageattributes gives the same): /MediaBox [ 0 0 595.276 841.89 ] /MediaBox [0 0 200 300] Would it be possible to copy the pdftex behaviour also in luatex? -- Ulrike Fischer http://www.troubleshooting-tex.de/

2 3

Function name mismatch between manual and C code: font.copyfont <-> font.getcopy ?
by Josef Friedrich 17 Jan '23

17 Jan '23

I think that there is a wrong function name documented in the manual. The lfontlib.c C file exports a getcopy function: https://gitlab.lisn.upsaclay.fr/texlive/luatex/-/blob/master/source/texk/we… diff --git a/manual/luatex-fonts.tex b/manual/luatex-fonts.tex index 136d20dd3..037d252ff 100644 --- a/manual/luatex-fonts.tex +++ b/manual/luatex-fonts.tex @@ -728,10 +728,10 @@ font.setfont(<number> n, <table> f) Note that at the moment, each access to the \type {font.fonts} or call to \type {font.getfont} creates a \LUA\ table for the whole font unless you cached it. -If you want a copy of the internal data you can use \type {font.copyfont}: +If you want a copy of the internal data you can use \type {font.getcopy}: \startfunctioncall -<table> f = font.copyfont(<number> n) +<table> f = font.getcopy(<number> n) \stopfunctioncall This one will return a table of the parameters as known to \TEX. These can be

2 1

Typo in the manual
by Josef Friedrich 16 Jan '23

16 Jan '23

diff --git a/manual/luatex-fonts.tex b/manual/luatex-fonts.tex index 136d20dd3..917147c55 100644 --- a/manual/luatex-fonts.tex +++ b/manual/luatex-fonts.tex @@ -788,7 +788,7 @@ Within reasonable bounds you can extend a font after it has been defined. Becaus some properties are best left unchanged this is limited to adding characters. \startfunctioncall -font.addcharacters(<number n>, <table> f) +font.addcharacters(<number> n, <table> f) \stopfunctioncall The table passed can have the fields \type {characters} which is a (sub)table

2 2

Using Harfbuzz with dvilualatex produces invalid font references
by Zameer Manji 15 Jan '23

15 Jan '23

Hello, I have run into a bug when using HarfBuzz and dvilualatex. When the following document is compiled with dvilualatex ``` \documentclass{minimal} \usepackage{fontspec} \setmainfont[Renderer = OpenType]{OpenSans-Regular.ttf } \begin{document} Hello \end{document} ``` The produced DVI file cannot be handled by dvipdfmx. Running dvipdfmx produces the following error: ``` dvipdfmx:fatal: Unable to find TFM file "[OpenSans-Regular.ttf]:mode=harf;shaper=ot;script=latn;language=dflt;+tlig;". ``` Removing '[Render = OpenType]' and running dvipdfmx on the resulting dvi file works fine. -- Zameer Manji

1 0

Typo in the LuaTeX manual: node.type(n)
by Josef Friedrich 15 Jan '23

15 Jan '23

I found a typo in the LuaTeX manual. It would be nice if this error could be corrected. I've attached a patch. I made this patch from the mirrored repository on Github (https://github.com/TeX-Live/luatex) Despite an intensive search I could not find the current development repository of LuaTeX. I read about an upcoming Git migration in the mail archive. Is there any progress? diff --git a/manual/luatex-nodes.tex b/manual/luatex-nodes.tex index d18006df0..a4ba7cfd7 100644 --- a/manual/luatex-nodes.tex +++ b/manual/luatex-nodes.tex @@ -1248,7 +1248,7 @@ This converts a single type name to its internal numeric representation. \libindex {type} \libindex {subtype} -In the argument is a number, then the next function converts an internal numeric +If the argument is a number, then the type function converts an internal numeric representation to an external string representation. Otherwise, it will return the string \type {node} if the object represents a node, and \type {nil} otherwise.

2 1

should there be a decode array in the SMask dictionary?
by Ulrike Fischer 30 Dec '22

30 Dec '22

If I run the following with pdftex I get a rather black square (checked in three pdf viewers). With luatex I get a rather light gray square, which looks imho wrong as color values between 0 and 0.2 should be dark. The png can be found here: https://i.stack.imgur.com/8JrYD.png \ifcsname directlua\endcsname \pdfvariable compresslevel 0 \pdfvariable objcompresslevel 0 \saveimageresource attr{/Decode [0 0.2 0 0.2 0 0.2]}{blue_square.png} \useimageresource\the\lastsavedimageresourceindex \else \pdfcompresslevel 0 \pdfobjcompresslevel 0 \pdfximage attr{/Decode [0 0.2 0 0.2 0 0.2]}{blue_square.png} \leavevmode\pdfrefximage \the\pdflastximage \fi \bye pdftex adds a transparency group which is missing in luatex, but it didn't change when I added that manually. The other difference between both engines is that pdftex adds the /Decode array only to the image object dictionary and not also to the Smask dictionary: With pdftex I get as image object dictionary << /Decode [0 0.2 0 0.2 0 0.2] /Type /XObject /Subtype /Image /Width 115 /Height 115 /BitsPerComponent 8 /ColorSpace /DeviceRGB /SMask 8 0 R /Length 39675 >> and as SMask dictionary << /Type /XObject /Subtype /Image /Width 115 /Height 115 /BitsPerComponent 8 /ColorSpace /DeviceGray /Length 13225 >> The image dictionary with luatex is identical but the SMask has also a /Decode array: << /Type /XObject /Subtype /Image /Decode [0 0.2 0 0.2 0 0.2] /Width 115 /Height 115 /BitsPerComponent 8 /ColorSpace /DeviceGray /Length 13225 >> If I disable the Decode array by replacing /Decode with /Dexode then the expected dark square appears. -- Ulrike Fischer http://www.troubleshooting-tex.de/

2 1

luaotfload strange message
by Fabrice Popineau 17 Dec '22

17 Dec '22

Hi everybody, I have this message showing up for some time now: luaotfload | db : Reload initiated (formats: otf,ttf,ttc); reason: Font "CambriaB.ttf" not found. every time I compile the same file. This message is quite recent (TeXLive 2022 ?). It is also strange that I need to state explicitly : \setmainfont{Cambria.otf}[ BoldFont=CambriaB.ttf, ItalicFont=CambriaI.ttf, BoldItalicFont=CambriaI.ttf, BoldItalicFeatures={RawFeature={embolden=5}} ] at the same time (see post https://tex.stackexchange.com/questions/657372/lualatex-cannot-use-bold-cam… ) Any idea what's going wrong with Cambria ? I am using TeXLive/Windows if that matters. Thanks for your help. -- Fabrice

2 1

Wrong tail in node.ligaturing
by Marcel Fabian Krüger 03 Dec '22

03 Dec '22

Hi, in LuaTeX node.ligaturing should return the head and the tail of the list after ligatures got applied. But in the case that the tail of the new list is a discretionary the current code returns the passed in tail instead, assuming that it didn't change. This breaks if the discretionary node wasn't the tail before the ligature pass:. Take for example \directlua{ local b = token.scan_list() local h = b.head local t = node.tail(h) local post_h, post_t = node.ligaturing(h, node.tail(t)) print(node.tail(post_h), post_t) }\hpack{a\discretionary{}{f}{f}f} \bye Here the `f`s in the discretionary form ligatures with the `f` after the discretionary, so after node.ligaturing the list if effectively `a\discretionary{}{ff}{ff}` and therefore `post_t` should point to the discretionary node. But as the output shows, post_t instead is a glyph node while node.tail(post_h) is the expected disc node. This is caused by `handle_lig_word` in luafont.c. `handle_lig_word` is used in `handle_ligaturing` as while (cur != null) { if (type(cur) == glyph_node || (type(cur) == boundary_node)) { cur = handle_lig_word(cur); } prev = cur; cur = vlink(cur); } so it is expected that handle_lig_word returns the last node already handled so that afterwards the loop can continue at vlink(cur). But if the handled segment ends with a discretionary `handle_lig_word` returns the node `after` the last already handled node instead. This is fine if the last node is a non glyph/non boundary node, but if the discretionary ends the segment passed to handle_ligaturing than this means that `handle_lig_word` returns null, therefore settings `prev` to `null` instead of tracking the tail. Also this relies on `vlink(null)` being null, causing issues if this ever gets corrupted (see my next mail for an example...). It can be fixed by making sure that handle_lig_word always returns the last handled node, e.g. using diff --git a/source/texk/web2c/luatexdir/font/luafont.c b/source/texk/web2c/luatexdir/font/luafont.c index 2e08facb1..c33037244 100644 --- a/source/texk/web2c/luatexdir/font/luafont.c +++ b/source/texk/web2c/luatexdir/font/luafont.c @@ -2242,6 +2242,7 @@ static halfword handle_lig_nest(halfword root, halfword cur) static halfword handle_lig_word(halfword cur) { halfword right = null; + halfword last = null; if (type(cur) == boundary_node) { halfword prev = alink(cur); halfword fwd = vlink(cur); @@ -2481,9 +2482,10 @@ static halfword handle_lig_word(halfword cur) } else { /*tex We have glyph nor disc. */ - return cur; + return last; } /*tex Goto the next node, where |\par| allows |vlink(cur)| to be NULL. */ + last = cur; cur = vlink(cur); } return cur; -- Best regards, Marcel

2 2

Dropped kerning around automatic hyphens
by Marcel Fabian Krüger 03 Dec '22

03 Dec '22

Hi, currently LuaTeX does not insert kerning between hyphens and characters before discretionary hyphens if the hyphen was inserted automatically. Take for example (here `a` is used as hyphenation character to simulate a font where kerning with the hyphen is mmre common than in cmr): \showboxdepth=\maxdimen \showboxbreadth=\maxdimen \tracingonline=1 \lefthyphenmin1 \righthyphenmin1 \hyphenation{V-b} \prehyphenchar=`a \setbox0=\vbox{Vb} \showbox0 \bye This results in [...] ..\tenrm V ..\discretionary (penalty 50) ...< \tenrm a ..\tenrm b [...] with no kern between the `V` and the `a`. If the hyphenation point is inserted manually by using \setbox0=\vbox{V\-b} instead the problem disappears and we get the expected [...] ..\tenrm V ..\discretionary (penalty 50) ...< \kern-0.83334 (font) ...< \tenrm a ..\tenrm b [...] Additionally the broken version writes the dropped kern node to vlink(null) breaking any code which relies on vlink(null) being null (see e.g. my previous mail). The issue is that `add_kern_before` in luafont.c relies on alink of the right glyph being valid. Since the right glyph here is the "hyphen" glyph in a discretionary this depends on what `alink` for the beginning of a discretionary list is. Currently this is inconsistent. When set through `set_disc_field` then the `alink` is explicitly set to null to avoid exposing the temporary "nodes" in discretionaries to Lua code. his triggers the bug since the kern gets added after null instead of before the right glyph. If the discretionary gets inserted through a discretionary_cmd by append_discretionary in maincontrol.c then the alink gets explicitly set to these pseudo nodes instead avoiding the issue. It doesn't make much sense to handle this inconsistently this is likely and internal nodes are already exposed in other places, so IMO the best solution is to alink to these nodes in set_disc_field too, e.g. with diff --git a/source/texk/web2c/luatexdir/lang/texlang.c b/source/texk/web2c/luatexdir/lang/texlang.c index a0d067251..3cbbdd3b4 100644 --- a/source/texk/web2c/luatexdir/lang/texlang.c +++ b/source/texk/web2c/luatexdir/lang/texlang.c @@ -470,12 +470,7 @@ static halfword compound_word_break(halfword t, int clang) void set_disc_field(halfword f, halfword t) { if (t != null) { - /*tex - No |couple_nodes(f, t);| as we can better not expose |f| as |prev| - pointer. - */ - vlink(f) = t ; - alink(t) = null ; + couple_nodes(f, t); tlink(f) = tail_of_list(t); } else { vlink(f) = null; -- Best, Marcel

2 1

Re: [Dev-luatex] \Udelcodenum doesn't work properly
by Hans Hagen 18 Nov '22

18 Nov '22

On 11/18/2022 12:25 PM, Petr Olsak wrote: > Sorry, > > I need to set delcodes to Unicode fonts and read them. LuaTeX manual > says that > > ----- > > The following new primitives are compatible with XƎTEX: > > ... > > \Udelcode > > \Udelcodenum > > ----- > > and XeTeX manual says that \Udelcode <charnum>=<family><slot> can save > delcode. and \Udelcodenum can read or save packed <family>/<slot> data > (the packed format isn't specified, but it doesn't matter). I am using > \Udelcode for setting delcode data. I don't know nothing else how to do > this. Now, I need to read saved delcode data using \Udelcodenum for > debugging purposes. Is there another way for saving and reading it? I am > talking only about Unicode fonts, i.e. there is only single pair > <family><slot>, no two pairs like in the classical \delcode. \def\theUdelcodesmallfam {\directlua{tex.print(tex.getdelcode(token.scan_int())[1])}} \def\theUdelcodelargefam {\directlua{tex.print(tex.getdelcode(token.scan_int())[3])}} \def\theUdelcodesmallchar {\directlua{tex.print(tex.getdelcode(token.scan_int())[2])}} \def\theUdelcodelargechar {\directlua{tex.print(tex.getdelcode(token.scan_int())[4])}} \theUdelcodesmallfam \la\ \theUdelcodelargefam \la\ \theUdelcodesmallchar\la\ \theUdelcodelargechar\la\ (as you can also set them there's actually always two pairs) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------

1 0