Hi Alan, I guess you are using mkiv, since in mkii your code seems to work here. Then, I think the way references to floats should be entered have changed and one should use a construction such as: \setupinteraction[state=start] \starttext \goto{Figure A}[fig:cow.pdf] Reference to Figure A on page \at[fig:cow.pdf] \goto{Table 1}[tab:Table01] \goto{Some text}[Text] \page \startplacefigure[reference=fig:cow.pdf,title=Figure A][here,page,force,nonumber] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure \page \startplacetable[reference=tab:Table01,title=Table 1][here,force,nonumber] {\starttabulate[| l | l |] \NC 1000 \NC 2000 \NC\NR \stoptabulate} \stopplacetable \page Some text\reference[Text]{} \stoptext which gives appropriate working links. There should be also a short version of \placefigure or \placetable, but I don't remember the correct syntax… Sorry! Best regards: OK On 2 févr. 2013, at 14:25, Alan Bowen wrote:

Sorry to keep pushing this—it is a problem for a journal that I publish.

I have re-installed the ConTeXt standalone and the problem persists with

\setupinteraction[state=start]

\starttext \goto{Figure A}[fig:cow.pdf]

Reference to Figure A on page \at[fig:cow.pdf]

\goto{Table 1}[tab:Table01]

\goto{Some text}[Text]

\page \useexternalfigure[Graphic][cow.pdf][] \placefigure [here,page,force,nonumber] [fig:cow.pdf] {Figure A} {\externalfigure[cow.pdf][type=pdf, width=.5\textwidth]} \page \placetable [here,force,nonumber] [tab:Table01] {Table 1} {\starttabulate[| l | l |] \NC 1000 \NC 2000 \NC\NR \stoptabulate}

\page Some text\reference[Text]{} \stoptext

Only the last \goto works. Even the \at link fails, which is really discouraging.

Alan

On Thu, Jan 31, 2013 at 8:28 AM, Alan Bowen wrote: The problem persists with the latest beta. Am I not encoding this properly?

And in such cases, should one include a sample .pdf file as well?

Alan

On Wed, Jan 30, 2013 at 8:17 AM, Alan Bowen wrote: The following compiles in the latest beta standalone but with dead links to the Figure:

\setupinteraction[state=start] \starttext \goto{Figure A}[fig:Figure.pdf]

\goto{Text A}[TextA] \page \useexternalfigure[Graphic][Figure.pdf][] \placefigure [here,page,force,nonumber] [fig:Figure.pdf] {Figure A} {\externalfigure[Figure.pdf][type=pdf, width=\textwidth]}

\reference[TextA]{} \input knuth \stoptext

Any suggestions?

Alan

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________

On Sat, 2 Feb 2013, Wolfgang Schuster wrote:

The references/hyperlinks for floats don’t work when the float number is disabled because the necessary attribute for link isn’t set then.

I would call this behavior a bug. After all, hyperlinks work correctly for unnumbered heads (\subject etc.) \setupinteraction[state=start] \starttext \subject[sub:one]{A subject} \startplacefigure [ reference=fig:cow.pdf, title={Figure A}, location={here,nonumber}, ] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure In \about[fig:cow.pdf], the hyperlink is not working In \about[sub:one], the hyperlink is working \stoptext Aditya

Thanks, Aditya. The hack works nicely. I will try my hand at defining a new float environment, given the uncertainty of the timing of any fix in ConTeXt itself. Alan On Sat, Feb 2, 2013 at 11:48 PM, Aditya Mahajan wrote:

On Sat, 2 Feb 2013, Aditya Mahajan wrote:

On Sat, 2 Feb 2013, Wolfgang Schuster wrote:

...

The references/hyperlinks for floats don’t work when the float number is

...

disabled because the necessary attribute for link isn’t set then.

I would call this behavior a bug. After all, hyperlinks work correctly for unnumbered heads (\subject etc.)

\setupinteraction[state=start]

\starttext \subject[sub:one]{A subject} \startplacefigure [ reference=fig:cow.pdf, title={Figure A}, location={here,nonumber}, ] \externalfigure[cow.pdf][**width=.5\textwidth] \stopplacefigure

In \about[fig:cow.pdf], the hyperlink is not working In \about[sub:one], the hyperlink is working \stoptext

A workaround (using a horrible hack):

\defineconversion[gobble][\**gobbleoneargument] \setupcaption[figure][**numberconversion=gobble] \setuplabeltext[figure=]

\startplacefigure [ ... location={here}, ...] % Do not add nonumber to location

@Alan, if you need to disable numbering for a few figures, but want hyperlinks to work, you'll need to define a new float environment for those figures (and set the numberconversion and labeltext for that enironment).

Aditya

___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net

___________________________________________________________________________________

Hi Alan, Try something like this: \setupinteraction[state=start] \starttext \define[1]\MyCaptions{My caption is \quotation{#1}} %\define[1]\MyCaptions{} % gives empty caption \setupcaptions[command=\MyCaptions] \startplacefigure[reference=fig:cow.pdf,title=Figure A][here,page,force,nonumber] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure \page See \goto{that cow}[fig:cow.pdf] \stoptext Beware it changes all captions. I suppose you might use setups if you need different kinds of captions. You can also see from the first definition of \MyCaptions that the key 'command' was not intended to be used that way, which makes me wonder whether this will work for you or not. I hope it does. Michael On Feb 2, 2013, at 1:12 PM, Alan Bowen mailto:bowenalan03@gmail.com> wrote: Hi, Otared— I am using MKIV. Many thanks for the news about the changes to \placefigure and the sample alternative: that is very helpful and much appreciated. The only problem remaining is how to cancel the automatic titling/numbering. In \startplacefigure[reference=fig:cow.pdf,title=Figure A][here,page,force,nonumber] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure the output has two titles (“Figure 1” and “Figure A”). I have checked the wiki (which does not show this as a possibility) and experimented with “nonumber” and “number=no”, all without success. \setupcaptions[number=no] gets rid of “Figure 1” but while the links show properly, they do not actually work. Alan On Sat, Feb 2, 2013 at 11:16 AM, Otared Kavian mailto:otared@gmail.com> wrote: Hi Alan, I guess you are using mkiv, since in mkii your code seems to work here. Then, I think the way references to floats should be entered have changed and one should use a construction such as: \setupinteraction[state=start] \starttext \goto{Figure A}[fig:cow.pdf] Reference to Figure A on page \at[fig:cow.pdf] \goto{Table 1}[tab:Table01] \goto{Some text}[Text] \page \startplacefigure[reference=fig:cow.pdf,title=Figure A][here,page,force,nonumber] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure \page \startplacetable[reference=tab:Table01,title=Table 1][here,force,nonumber] {\starttabulate[| l | l |] \NC 1000 \NC 2000 \NC\NR \stoptabulate} \stopplacetable \page Some text\reference[Text]{} \stoptext which gives appropriate working links. There should be also a short version of \placefigure or \placetable, but I don't remember the correct syntax… Sorry! Best regards: OK On 2 févr. 2013, at 14:25, Alan Bowen mailto:bowenalan03@gmail.com> wrote: Sorry to keep pushing this—it is a problem for a journal that I publish. I have re-installed the ConTeXt standalone and the problem persists with \setupinteraction[state=start] \starttext \goto{Figure A}[fig:cow.pdf] Reference to Figure A on page \at[fig:cow.pdf] \goto{Table 1}[tab:Table01] \goto{Some text}[Text] \page \useexternalfigure[Graphic][cow.pdf][] \placefigure [here,page,force,nonumber] [fig:cow.pdf] {Figure A} {\externalfigure[cow.pdf][type=pdf, width=.5\textwidth]} \page \placetable [here,force,nonumber] [tab:Table01] {Table 1} {\starttabulate[| l | l |] \NC 1000 \NC 2000 \NC\NR \stoptabulate} \page Some text\reference[Text]{} \stoptext Only the last \goto works. Even the \at link fails, which is really discouraging. Alan On Thu, Jan 31, 2013 at 8:28 AM, Alan Bowen mailto:bowenalan03@gmail.com> wrote: The problem persists with the latest beta. Am I not encoding this properly? And in such cases, should one include a sample .pdf file as well? Alan On Wed, Jan 30, 2013 at 8:17 AM, Alan Bowen mailto:bowenalan03@gmail.com> wrote: The following compiles in the latest beta standalone but with dead links to the Figure: \setupinteraction[state=start] \starttext \goto{Figure A}[fig:Figure.pdf] \goto{Text A}[TextA] \page \useexternalfigure[Graphic][Figure.pdf][] \placefigure [here,page,force,nonumber] [fig:Figure.pdf] {Figure A} {\externalfigure[Figure.pdf][type=pdf, width=\textwidth]} \reference[TextA]{} \input knuth \stoptext Any suggestions? Alan ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nlmailto:ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nlhttp://www.pragma-ade.nl/ / http://tex.aanhet.nethttp://tex.aanhet.net/ archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.nethttp://contextgarden.net/ ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nlmailto:ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nlhttp://www.pragma-ade.nl/ / http://tex.aanhet.nethttp://tex.aanhet.net/ archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.nethttp://contextgarden.net/ ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nlmailto:ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ________________________________ This e-mail message (including any attachments) is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message (including any attachments) is strictly prohibited. If you have received this message in error, please contact the sender by reply e-mail message and destroy all copies of the original message (including attachments).

On Sat, 2 Feb 2013, Alan Bowen wrote:

I am using MKIV. Many thanks for the news about the changes to \placefigure and the sample alternative: that is very helpful and much appreciated.

The only problem remaining is how to cancel the automatic titling/numbering. In

\startplacefigure[reference=fig:cow.pdf,title=Figure A][here,page,force,nonumber] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure

the output has two titles (“Figure 1” and “Figure A”).

I have checked the wiki (which does not show this as a possibility) and experimented with “nonumber” and “number=no”, all without success. \setupcaptions[number=no] gets rid of “Figure 1” but while the links show properly, they do not actually work.

As Wolfgang said, the 2nd argument of \startplacefigure is for specifying userdata, not the location of the figure. To specify the location of the figure, use the location key: \starttext \startplacefigure [ reference=fig:cow.pdf, title={Figure A}, location={here,page,force,nonumber}, ] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure \stoptext Aditya

Hi Hans, After changing the definition of \floatcaptionattribute in the file [/context-minimal]/tex/texmf-context/tex/context/base/strc-flt.mkvi and remaking th eformats with context --make --all everything seems to work fine with the following example: %%% begin goto-figure.tex \starttext \goto{Figure A}[fig:cow.pdf] Reference to Figure A on page \at[fig:cow.pdf] \goto{Table 1}[tab:Table01] \goto{Some text}[Text] \page \startplacefigure[ reference=fig:cow.pdf, title=Figure A, location={here,page,force,nonumber}, ] \externalfigure[cow.pdf][width=.5\textwidth] \stopplacefigure \page \startplacetable[ reference=tab:Table01, title=Table 1, location={here,force,nonumber}, ] {\starttabulate[| l | l |] \NC 1000 \NC 2000 \NC\NR \stoptabulate} \stopplacetable \page Some text\reference[Text]{} \page \stoptext %%% end goto-figure.tex Best regards: OK On 3 févr. 2013, at 15:29, Hans Hagen wrote:

On 2/2/2013 2:25 PM, Alan Bowen wrote:

...

Sorry to keep pushing this—it is a problem for a journal that I publish.

I have re-installed the ConTeXt standalone and the problem persists with

\setupinteraction[state=start]

\starttext \goto{Figure A}[fig:cow.pdf]

Reference to Figure A on page \at[fig:cow.pdf]

\goto{Table 1}[tab:Table01]

\goto{Some text}[Text]

\page \useexternalfigure[Graphic][cow.pdf][] \placefigure[here,page,force,nonumber] [fig:cow.pdf] {Figure A} {\externalfigure[cow.pdf][type=pdf, width=.5\textwidth]} \page \placetable[here,force,nonumber] [tab:Table01] {Table 1} {\starttabulate[|l|l|] \NC 1000 \NC 2000 \NC\NR \stoptabulate} \page Some text\reference[Text]{} \stoptext

Only the last \goto works. Even the \at link fails, which is really discouraging.

You can play with this:

\def\floatcaptionattribute {\iflocation % \ifnofloatnumber % \else \ifnofloatcaption \else \ifinsidesplitfloat \ifconditional\splitfloatfirstdone \else attr \destinationattribute \currentfloatattribute \fi \else attr \destinationattribute \currentfloatattribute \fi \fi % \fi \fi}

I have no time for testing right now so you need to check all odd cases before I change something.

Hans

----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________