MKIV: error, no format found with name: cont-en, aborting
sent from context@rik.users.panix.com Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part. """"" Dear list, Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting). I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update. Attached is the log from the latest install try (with filenames of copied files removed). LMTX has no problems. All suggestions welcome. -- Rik Kabel """"""
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------
On 11/13/2019 04:14, Hans Hagen wrote:
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans
Yes. Just did a fresh install, getting current version: 2019.11.12 23:58, and have the same result. -- Rik
On 11/13/2019 3:01 PM, Rik Kabel wrote:
On 11/13/2019 04:14, Hans Hagen wrote:
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans
Yes. Just did a fresh install, getting current version: 2019.11.12 23:58, and have the same result.
any messages? there should be something resolvers | formats | resolvers | formats | format path : c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex resolvers | formats | luatex engine : luametatex resolvers | formats | lua startup file : c:/data/develop/context/sources/luat-cod.lua resolvers | formats | context file : c:/data/develop/context/sources/cont-en.mkxl resolvers | formats | run time : 10.141 seconds resolvers | formats | return value : okay resolvers | formats | at the end (or some not found messages) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------
On 11/13/2019 10:15, Hans Hagen wrote:
On 11/13/2019 3:01 PM, Rik Kabel wrote:
On 11/13/2019 04:14, Hans Hagen wrote:
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans
Yes. Just did a fresh install, getting current version: 2019.11.12 23:58, and have the same result.
any messages? there should be something
resolvers | formats | resolvers | formats | format path : c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex resolvers | formats | luatex engine : luametatex resolvers | formats | lua startup file : c:/data/develop/context/sources/luat-cod.lua resolvers | formats | context file : c:/data/develop/context/sources/cont-en.mkxl resolvers | formats | run time : 10.141 seconds resolvers | formats | return value : okay resolvers | formats |
at the end (or some not found messages)
Hans
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________
I get the following (grepping for resolvers.*formats) from the install: resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.513 seconds resolvers | formats | return value : error resolvers | formats | resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.733 seconds resolvers | formats | return value : error resolvers | formats | and from an attempted compile, I get: resolvers | formats | using tex source file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.045 seconds resolvers | formats | return value : error resolvers | formats | -- Rik
On 11/13/2019 4:54 PM, Rik Kabel wrote:
On 11/13/2019 10:15, Hans Hagen wrote:
On 11/13/2019 3:01 PM, Rik Kabel wrote:
On 11/13/2019 04:14, Hans Hagen wrote:
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans
Yes. Just did a fresh install, getting current version: 2019.11.12 23:58, and have the same result.
any messages? there should be something
resolvers | formats | resolvers | formats | format path : c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex resolvers | formats | luatex engine : luametatex resolvers | formats | lua startup file : c:/data/develop/context/sources/luat-cod.lua resolvers | formats | context file : c:/data/develop/context/sources/cont-en.mkxl resolvers | formats | run time : 10.141 seconds resolvers | formats | return value : okay resolvers | formats |
at the end (or some not found messages)
Hans
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________
I get the following (grepping for resolvers.*formats) from the install:
resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.513 seconds resolvers | formats | return value : error resolvers | formats | resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.733 seconds resolvers | formats | return value : error resolvers | formats |
and from an attempted compile, I get:
resolvers | formats | using tex source file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.045 seconds resolvers | formats | return value : error resolvers | formats | ok, so how do you run ? with the full path?
can you test with --addbinarypath Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl -----------------------------------------------------------------
On 11/13/2019 11:14, Hans Hagen wrote:
On 11/13/2019 4:54 PM, Rik Kabel wrote:
On 11/13/2019 10:15, Hans Hagen wrote:
On 11/13/2019 3:01 PM, Rik Kabel wrote:
On 11/13/2019 04:14, Hans Hagen wrote:
On 11/13/2019 9:51 AM, luigi scarso wrote:
sent from ** context@rik.users.panix.com mailto:context@rik.users.panix.com
Note from admin: the email is in defer state because "Message body is too big: 159549 bytes with a limit of 100 KB" I have kept the initial part.
""""" Dear list,
Since the 20191029 update I have not been able to create a document via MKIV, suffering from the subject error message (error, no format found with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs. None work. I suspect it is something on my system, but cannot think of a relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of copied files removed).
LMTX has no problems.
All suggestions welcome. Also with todays version?
Hans
Yes. Just did a fresh install, getting current version: 2019.11.12 23:58, and have the same result.
any messages? there should be something
resolvers | formats | resolvers | formats | format path : c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex resolvers | formats | luatex engine : luametatex resolvers | formats | lua startup file : c:/data/develop/context/sources/luat-cod.lua resolvers | formats | context file : c:/data/develop/context/sources/cont-en.mkxl resolvers | formats | run time : 10.141 seconds resolvers | formats | return value : okay resolvers | formats |
at the end (or some not found messages)
Hans
----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________
I get the following (grepping for resolvers.*formats) from the install:
resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.513 seconds resolvers | formats | return value : error resolvers | formats | resolvers | formats | using tex source file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.733 seconds resolvers | formats | return value : error resolvers | formats |
and from an attempted compile, I get:
resolvers | formats | using tex source file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv' resolvers | formats | using specification file 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus' resolvers | formats | using tex source path 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv' resolvers | formats | changing to format path 'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex' resolvers | formats | executing runner 'make luatex format': luatex --ini --lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump resolvers | formats | resolvers | formats | format path : C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex resolvers | formats | luatex engine : luatex resolvers | formats | lua startup file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua resolvers | formats | context file : C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv resolvers | formats | run time : 1.045 seconds resolvers | formats | return value : error resolvers | formats | ok, so how do you run ? with the full path?
can you test with --addbinarypath
Hans
No difference with --addbinarypath. I run this from a command prompt (within ConEmu) in which setuptex had already been run, so the path was set properly and is the first TeX-related item in the path. The environment also shows SETUPTEX=done. -- Rik
This issue has been resolved with a new luatex dll in the Win64 bin directory (perhaps elsewhere as well, but I only have Win64). Thank you to all who worked on it. -- Rik
participants (4)
-
Hans Hagen -
luigi scarso -
Rik Kabel -
Rik Kabel